net: Add batman-adv meshing protocol

B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing
protocol for multi-hop ad-hoc mesh networks. The networks may be wired or
wireless. See http://www.open-mesh.org/ for more information and user space
tools.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 323 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-net-batman-adv b/Documentation/ABI/testing/sysfs-class-net-batman-adv
new file mode 100644
index 000000000000..38dd762def4b
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-net-batman-adv
@@ -0,0 +1,14 @@
+
+What:           /sys/class/net/<iface>/batman-adv/mesh_iface
+Date:           May 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                The /sys/class/net/<iface>/batman-adv/mesh_iface file
+                displays the batman mesh interface this <iface>
+                currently is associated with.
+
+What:           /sys/class/net/<iface>/batman-adv/iface_status
+Date:           May 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Indicates the status of <iface> as it is seen by batman.
diff --git a/Documentation/ABI/testing/sysfs-class-net-mesh b/Documentation/ABI/testing/sysfs-class-net-mesh
new file mode 100644
index 000000000000..748fe1701d25
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-net-mesh
@@ -0,0 +1,69 @@
+
+What:           /sys/class/net/<mesh_iface>/mesh/aggregated_ogms
+Date:           May 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Indicates whether the batman protocol messages of the
+                mesh <mesh_iface> shall be aggregated or not.
+
+What:           /sys/class/net/<mesh_iface>/mesh/bonding
+Date:           June 2010
+Contact:        Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
+Description:
+                Indicates whether the data traffic going through the
+                mesh will be sent using multiple interfaces at the
+                same time (if available).
+
+What:           /sys/class/net/<mesh_iface>/mesh/fragmentation
+Date:           October 2010
+Contact:        Andreas Langer <an.langer@gmx.de>
+Description:
+                Indicates whether the data traffic going through the
+                mesh will be fragmented or silently discarded if the
+                packet size exceeds the outgoing interface MTU.
+
+What:           /sys/class/net/<mesh_iface>/mesh/gw_bandwidth
+Date:           October 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Defines the bandwidth which is propagated by this
+                node if gw_mode was set to 'server'.
+
+What:           /sys/class/net/<mesh_iface>/mesh/gw_mode
+Date:           October 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Defines the state of the gateway features. Can be
+                either 'off', 'client' or 'server'.
+
+What:           /sys/class/net/<mesh_iface>/mesh/gw_sel_class
+Date:           October 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Defines the selection criteria this node will use
+                to choose a gateway if gw_mode was set to 'client'.
+
+What:           /sys/class/net/<mesh_iface>/mesh/orig_interval
+Date:           May 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Defines the interval in milliseconds in which batman
+                sends its protocol messages.
+
+What:           /sys/class/net/<mesh_iface>/mesh/hop_penalty
+Date:           Oct 2010
+Contact:        Linus Lüssing <linus.luessing@web.de>
+Description:
+		Defines the penalty which will be applied to an
+		originator message's tq-field on every hop.
+
+What:           /sys/class/net/<mesh_iface>/mesh/vis_mode
+Date:           May 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Each batman node only maintains information about its
+                own local neighborhood, therefore generating graphs
+                showing the topology of the entire mesh is not easily
+                feasible without having a central instance to collect
+                the local topologies from all nodes. This file allows
+                to activate the collecting (server) mode.
diff --git a/Documentation/networking/batman-adv.txt b/Documentation/networking/batman-adv.txt
new file mode 100644
index 000000000000..77f0cdd5b0dd
--- /dev/null
+++ b/Documentation/networking/batman-adv.txt
@@ -0,0 +1,240 @@
+[state: 21-11-2010]
+
+BATMAN-ADV
+----------
+
+Batman  advanced  is  a new approach to wireless networking which
+does no longer operate on the IP basis. Unlike the batman daemon,
+which  exchanges  information  using UDP packets and sets routing
+tables, batman-advanced operates on ISO/OSI Layer 2 only and uses
+and  routes  (or  better: bridges) Ethernet Frames. It emulates a
+virtual network switch of all nodes participating.  Therefore all
+nodes  appear  to be link local, thus all higher operating proto-
+cols won't be affected by any changes within the network. You can
+run almost any protocol above batman advanced, prominent examples
+are: IPv4, IPv6, DHCP, IPX.
+
+Batman advanced was implemented as a Linux kernel driver  to  re-
+duce the overhead to a minimum. It does not depend on any (other)
+network driver, and can be used on wifi as well as ethernet  lan,
+vpn,  etc ... (anything with ethernet-style layer 2).
+
+CONFIGURATION
+-------------
+
+Load the batman-adv module into your kernel:
+
+# insmod batman-adv.ko
+
+The  module  is now waiting for activation. You must add some in-
+terfaces on which batman can operate. After  loading  the  module
+batman  advanced  will scan your systems interfaces to search for
+compatible interfaces. Once found, it will create  subfolders  in
+the /sys directories of each supported interface, e.g.
+
+# ls /sys/class/net/eth0/batman_adv/
+# iface_status  mesh_iface
+
+If an interface does not have the "batman_adv" subfolder it prob-
+ably is not supported. Not supported  interfaces  are:  loopback,
+non-ethernet and batman's own interfaces.
+
+Note:  After the module was loaded it will continuously watch for
+new interfaces to verify the compatibility. There is no  need  to
+reload the module if you plug your USB wifi adapter into your ma-
+chine after batman advanced was initially loaded.
+
+To activate a  given  interface  simply  write  "bat0"  into  its
+"mesh_iface" file inside the batman_adv subfolder:
+
+# echo bat0 > /sys/class/net/eth0/batman_adv/mesh_iface
+
+Repeat  this step for all interfaces you wish to add.  Now batman
+starts using/broadcasting on this/these interface(s).
+
+By reading the "iface_status" file you can check its status:
+
+# cat /sys/class/net/eth0/batman_adv/iface_status
+# active
+
+To deactivate an interface you have  to  write  "none"  into  its
+"mesh_iface" file:
+
+# echo none > /sys/class/net/eth0/batman_adv/mesh_iface
+
+
+All  mesh  wide  settings  can be found in batman's own interface
+folder:
+
+#  ls  /sys/class/net/bat0/mesh/
+#  aggregated_ogms  bonding  fragmentation  orig_interval
+#  vis_mode
+
+
+There is a special folder for debugging informations:
+
+#  ls /sys/kernel/debug/batman_adv/bat0/
+#  originators  socket  transtable_global  transtable_local
+#  vis_data
+
+
+Some of the files contain all sort of status information  regard-
+ing  the  mesh  network.  For  example, you can view the table of
+originators (mesh participants) with:
+
+# cat /sys/kernel/debug/batman_adv/bat0/originators
+
+Other files allow to change batman's behaviour to better fit your
+requirements.  For instance, you can check the current originator
+interval (value in milliseconds which determines how often batman
+sends its broadcast packets):
+
+# cat /sys/class/net/bat0/mesh/orig_interval
+# 1000
+
+and also change its value:
+
+# echo 3000 > /sys/class/net/bat0/mesh/orig_interval
+
+In very mobile scenarios, you might want to adjust the originator
+interval to a lower value. This will make the mesh  more  respon-
+sive to topology changes, but will also increase the overhead.
+
+
+USAGE
+-----
+
+To  make use of your newly created mesh, batman advanced provides
+a new interface "bat0" which you should use from this  point  on.
+All  interfaces  added  to  batman  advanced are not relevant any
+longer because batman handles them for you. Basically, one "hands
+over" the data by using the batman interface and batman will make
+sure it reaches its destination.
+
+The "bat0" interface can be used like any  other  regular  inter-
+face.  It needs an IP address which can be either statically con-
+figured or dynamically (by using DHCP or similar services):
+
+# NodeA: ifconfig bat0 192.168.0.1
+# NodeB: ifconfig bat0 192.168.0.2
+# NodeB: ping 192.168.0.1
+
+Note:  In  order to avoid problems remove all IP addresses previ-
+ously assigned to interfaces now used by batman advanced, e.g.
+
+# ifconfig eth0 0.0.0.0
+
+
+VISUALIZATION
+-------------
+
+If you want topology visualization, at least one mesh  node  must
+be configured as VIS-server:
+
+# echo "server" > /sys/class/net/bat0/mesh/vis_mode
+
+Each  node  is  either configured as "server" or as "client" (de-
+fault: "client").  Clients send their topology data to the server
+next to them, and server synchronize with other servers. If there
+is no server configured (default) within the  mesh,  no  topology
+information   will  be  transmitted.  With  these  "synchronizing
+servers", there can be 1 or more vis servers sharing the same (or
+at least very similar) data.
+
+When  configured  as  server,  you can get a topology snapshot of
+your mesh:
+
+# cat /sys/kernel/debug/batman_adv/bat0/vis_data
+
+This raw output is intended to be easily parsable and convertable
+with  other tools. Have a look at the batctl README if you want a
+vis output in dot or json format for instance and how those  out-
+puts could then be visualised in an image.
+
+The raw format consists of comma separated values per entry where
+each entry is giving information about a  certain  source  inter-
+face.  Each  entry can/has to have the following values:
+-> "mac" - mac address of an originator's source interface
+           (each line begins with it)
+-> "TQ mac  value"  -  src mac's link quality towards mac address
+                       of a neighbor originator's interface which
+                       is being used for routing
+-> "HNA mac" - HNA announced by source mac
+-> "PRIMARY" - this  is a primary interface
+-> "SEC mac" - secondary mac address of source
+               (requires preceding PRIMARY)
+
+The TQ value has a range from 4 to 255 with 255 being  the  best.
+The HNA entries are showing which hosts are connected to the mesh
+via bat0 or being bridged into the mesh network.  The PRIMARY/SEC
+values are only applied on primary interfaces
+
+
+LOGGING/DEBUGGING
+-----------------
+
+All error messages, warnings and information messages are sent to
+the kernel log. Depending on your operating  system  distribution
+this  can  be read in one of a number of ways. Try using the com-
+mands: dmesg, logread, or looking in the files  /var/log/kern.log
+or  /var/log/syslog.  All  batman-adv  messages are prefixed with
+"batman-adv:" So to see just these messages try
+
+# dmesg | grep batman-adv
+
+When investigating problems with your mesh network  it  is  some-
+times  necessary  to see more detail debug messages. This must be
+enabled when compiling the batman-adv module. When building  bat-
+man-adv  as  part of kernel, use "make menuconfig" and enable the
+option "B.A.T.M.A.N. debugging".
+
+Those additional  debug messages can be accessed  using a special
+file in debugfs
+
+# cat /sys/kernel/debug/batman_adv/bat0/log
+
+The additional debug output is by default disabled. It can be en-
+abled  during run time. Following log_levels are defined:
+
+0 - All  debug  output  disabled
+1 - Enable messages related to routing / flooding / broadcasting
+2 - Enable route or hna added / changed / deleted
+3 - Enable all messages
+
+The debug output can be changed at runtime  using  the  file
+/sys/class/net/bat0/mesh/log_level. e.g.
+
+# echo 2 > /sys/class/net/bat0/mesh/log_level
+
+will enable debug messages for when routes or HNAs change.
+
+
+BATCTL
+------
+
+As batman advanced operates on layer 2 all hosts participating in
+the  virtual switch are completely transparent for all  protocols
+above layer 2. Therefore the common diagnosis tools do  not  work
+as  expected.  To  overcome these problems batctl was created. At
+the  moment the  batctl contains ping,  traceroute,  tcpdump  and
+interfaces to the kernel module settings.
+
+For more information, please see the manpage (man batctl).
+
+batctl is available on http://www.open-mesh.org/
+
+
+CONTACT
+-------
+
+Please send us comments, experiences, questions, anything :)
+
+IRC:            #batman   on   irc.freenode.org
+Mailing-list:   b.a.t.m.a.n@b.a.t.m.a.n@lists.open-mesh.org
+                (optional   subscription   at
+                 https://lists.open-mesh.org/mm/listinfo/b.a.t.m.a.n)
+
+You can also contact the Authors:
+
+Marek  Lindner  <lindner_marek@yahoo.de>
+Simon  Wunderlich  <siwu@hrz.tu-chemnitz.de>