Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC DT updates from Olof Johansson:
 "Most of this branch consists of updates, additions and general churn
  of the device tree source files in the kernel (arch/arm/boot/dts).
  Besides that, there are a few things to point out:

   - Lots of platform conversion on OMAP2+, with removal of old board
     files for various platforms.
   - Final conversion of a bunch of ux500 (ST-Ericsson) platforms as
     well
   - Some updates to pinctrl and other subsystems.  Most of these are
     for DT-enablement of the various platforms and acks have been
     collected"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (385 commits)
  ARM: dts: bcm11351: Use GIC/IRQ defines for sdio interrupts
  ARM: dts: bcm: Add missing UARTs for bcm11351 (bcm281xx)
  ARM: dts: bcm281xx: Add card detect GPIO
  ARM: dts: rename ARCH_BCM to ARCH_BCM_MOBILE (dt)
  ARM: bcm281xx: Add device node for the GPIO controller
  ARM: mvebu: Add Netgear ReadyNAS 104 board
  ARM: tegra: fix Tegra114 IOMMU register address
  ARM: kirkwood: add support for OpenBlocks A7 platform
  ARM: dts: omap4-panda: add DPI pinmuxing
  ARM: dts: AM33xx: Add RNG node
  ARM: dts: AM33XX: Add hwspinlock node
  ARM: dts: OMAP5: Add hwspinlock node
  ARM: dts: OMAP4: Add hwspinlock node
  ARM: dts: use 'status' property for PCIe nodes
  ARM: dts: sirf: add missed address-cells and size-cells for prima2 I2C
  ARM: dts: sirf: add missed cell, cs and dma channel for SPI nodes
  ARM: dts: sirf: add missed graphics2d iobg in atlas6 dts
  ARM: dts: sirf: add missed chhifbg node in prima2 and atlas6 dts
  ARM: dts: sirf: add missed memcontrol-monitor node in prima2 and atlas6 dts
  ARM: mvebu: Add the core-divider clock to Armada 370/XP
  ...

12 files changed, 200 insertions, 831 deletions

diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index 91b7049affa1..808c1543b0f8 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -21,7 +21,8 @@ Required properties:
 Optional properties:
 - ti,no_idle_on_suspend: When present, it prevents the PM to idle the module
   during suspend.
-
+- ti,no-reset-on-init: When present, the module should not be reset at init
+- ti,no-idle-on-init: When present, the module should not be idled at init
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/arm/vic.txt b/Documentation/devicetree/bindings/arm/vic.txt
index 266716b23437..dd527216c5fb 100644
--- a/Documentation/devicetree/bindings/arm/vic.txt
+++ b/Documentation/devicetree/bindings/arm/vic.txt
@@ -18,6 +18,15 @@ Required properties:
 Optional properties:
 
 - interrupts : Interrupt source for parent controllers if the VIC is nested.
+- valid-mask : A one cell big bit mask of valid interrupt sources. Each bit
+  represents single interrupt source, starting from source 0 at LSb and ending
+  at source 31 at MSb. A bit that is set means that the source is wired and
+  clear means otherwise. If unspecified, defaults to all valid.
+- valid-wakeup-mask : A one cell big bit mask of interrupt sources that can be
+  configured as wake up source for the system. Order of bits is the same as for
+  valid-mask property. A set bit means that this interrupt source can be
+  configured as a wake up source for the system. If unspecied, defaults to all
+  interrupt sources configurable as wake up sources.
 
 Example:
 
@@ -26,4 +35,7 @@ Example:
 		interrupt-controller;
 		#interrupt-cells = <1>;
 		reg = <0x60000 0x1000>;
+
+		valid-mask = <0xffffff7f>;
+		valid-wakeup-mask = <0x0000ff7f>;
 	};
diff --git a/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt
new file mode 100644
index 000000000000..c62391fc0e39
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt
@@ -0,0 +1,19 @@
+* Core Divider Clock bindings for Marvell MVEBU SoCs
+
+The following is a list of provided IDs and clock names on Armada 370/XP:
+ 0 = nand (NAND clock)
+
+Required properties:
+- compatible : must be "marvell,armada-370-corediv-clock"
+- reg : must be the register address of Core Divider control register
+- #clock-cells : from common clock binding; shall be set to 1
+- clocks : must be set to the parent's phandle
+
+Example:
+
+corediv_clk: corediv-clocks@18740 {
+	compatible = "marvell,armada-370-corediv-clock";
+	reg = <0x18740 0xc>;
+	#clock-cells = <1>;
+	clocks = <&pll>;
+};
diff --git a/Documentation/devicetree/bindings/crypto/omap-aes.txt b/Documentation/devicetree/bindings/crypto/omap-aes.txt
new file mode 100644
index 000000000000..fd9717653cbb
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/omap-aes.txt
@@ -0,0 +1,31 @@
+OMAP SoC AES crypto Module
+
+Required properties:
+
+- compatible : Should contain entries for this and backward compatible
+  AES versions:
+  - "ti,omap2-aes" for OMAP2.
+  - "ti,omap3-aes" for OMAP3.
+  - "ti,omap4-aes" for OMAP4 and AM33XX.
+  Note that the OMAP2 and 3 versions are compatible (OMAP3 supports
+  more algorithms) but they are incompatible with OMAP4.
+- ti,hwmods: Name of the hwmod associated with the AES module
+- reg : Offset and length of the register set for the module
+- interrupts : the interrupt-specifier for the AES module.
+
+Optional properties:
+- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
+	Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: DMA request names should include "tx" and "rx" if present.
+
+Example:
+	/* AM335x */
+	aes: aes@53500000 {
+		compatible = "ti,omap4-aes";
+		ti,hwmods = "aes";
+		reg = <0x53500000 0xa0>;
+		interrupts = <102>;
+		dmas = <&edma 6>,
+		       <&edma 5>;
+		dma-names = "tx", "rx";
+	};
diff --git a/Documentation/devicetree/bindings/crypto/omap-sham.txt b/Documentation/devicetree/bindings/crypto/omap-sham.txt
new file mode 100644
index 000000000000..f839acd6f0ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/omap-sham.txt
@@ -0,0 +1,28 @@
+OMAP SoC SHA crypto Module
+
+Required properties:
+
+- compatible : Should contain entries for this and backward compatible
+  SHAM versions:
+  - "ti,omap2-sham" for OMAP2 & OMAP3.
+  - "ti,omap4-sham" for OMAP4 and AM33XX.
+  Note that these two versions are incompatible.
+- ti,hwmods: Name of the hwmod associated with the SHAM module
+- reg : Offset and length of the register set for the module
+- interrupts : the interrupt-specifier for the SHAM module.
+
+Optional properties:
+- dmas: DMA specifiers for the rx dma. See the DMA client binding,
+	Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: DMA request name. Should be "rx" if a dma is present.
+
+Example:
+	/* AM335x */
+	sham: sham@53100000 {
+		compatible = "ti,omap4-sham";
+		ti,hwmods = "sham";
+		reg = <0x53100000 0x200>;
+		interrupts = <109>;
+		dmas = <&edma 36>;
+		dma-names = "rx";
+	};
diff --git a/Documentation/devicetree/bindings/hwrng/omap_rng.txt b/Documentation/devicetree/bindings/hwrng/omap_rng.txt
new file mode 100644
index 000000000000..6a62acd86953
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwrng/omap_rng.txt
@@ -0,0 +1,22 @@
+OMAP SoC HWRNG Module
+
+Required properties:
+
+- compatible : Should contain entries for this and backward compatible
+  RNG versions:
+  - "ti,omap2-rng" for OMAP2.
+  - "ti,omap4-rng" for OMAP4, OMAP5 and AM33XX.
+  Note that these two versions are incompatible.
+- ti,hwmods: Name of the hwmod associated with the RNG module
+- reg : Offset and length of the register set for the module
+- interrupts : the interrupt number for the RNG module.
+		Only used for "ti,omap4-rng".
+
+Example:
+/* AM335x */
+rng: rng@48310000 {
+	compatible = "ti,omap4-rng";
+	ti,hwmods = "rng";
+	reg = <0x48310000 0x2000>;
+	interrupts = <111>;
+};
diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
index ed271fc255b2..8c8908ab84ba 100644
--- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
+++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
@@ -20,8 +20,29 @@ ti,dual-volt: boolean, supports dual voltage cards
 ti,non-removable: non-removable slot (like eMMC)
 ti,needs-special-reset: Requires a special softreset sequence
 ti,needs-special-hs-handling: HSMMC IP needs special setting for handling High Speed
+dmas: List of DMA specifiers with the controller specific format
+as described in the generic DMA client binding. A tx and rx
+specifier is required.
+dma-names: List of DMA request names. These strings correspond
+1:1 with the DMA specifiers listed in dmas. The string naming is
+to be "rx" and "tx" for RX and TX DMA requests, respectively.
+
+Examples:
+
+[hwmod populated DMA resources]
+
+	mmc1: mmc@0x4809c000 {
+		compatible = "ti,omap4-hsmmc";
+		reg = <0x4809c000 0x400>;
+		ti,hwmods = "mmc1";
+		ti,dual-volt;
+		bus-width = <4>;
+		vmmc-supply = <&vmmc>; /* phandle to regulator node */
+		ti,non-removable;
+	};
+
+[generic DMA request binding]
 
-Example:
 	mmc1: mmc@0x4809c000 {
 		compatible = "ti,omap4-hsmmc";
 		reg = <0x4809c000 0x400>;
@@ -30,4 +51,7 @@ Example:
 		bus-width = <4>;
 		vmmc-supply = <&vmmc>; /* phandle to regulator node */
 		ti,non-removable;
+		dmas = <&edma 24
+			&edma 25>;
+		dma-names = "tx", "rx";
 	};
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt
index 3077370c89af..1e70a8aff260 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt
@@ -59,16 +59,16 @@ Required subnode-properties:
 
 Optional subnode-properties:
 - fsl,drive-strength: Integer.
-    0: 4 mA
-    1: 8 mA
-    2: 12 mA
-    3: 16 mA
+    0: MXS_DRIVE_4mA
+    1: MXS_DRIVE_8mA
+    2: MXS_DRIVE_12mA
+    3: MXS_DRIVE_16mA
 - fsl,voltage: Integer.
-    0: 1.8 V
-    1: 3.3 V
+    0: MXS_VOLTAGE_LOW  - 1.8 V
+    1: MXS_VOLTAGE_HIGH - 3.3 V
 - fsl,pull-up: Integer.
-    0: Disable the internal pull-up
-    1: Enable the internal pull-up
+    0: MXS_PULL_DISABLE - Disable the internal pull-up
+    1: MXS_PULL_ENABLE  - Enable the internal pull-up
 
 Note that when enabling the pull-up, the internal pad keeper gets disabled.
 Also, some pins doesn't have a pull up, in that case, setting the fsl,pull-up
@@ -85,23 +85,32 @@ pinctrl@80018000 {
 	mmc0_8bit_pins_a: mmc0-8bit@0 {
 		reg = <0>;
 		fsl,pinmux-ids = <
-			0x2000 0x2010 0x2020 0x2030
-			0x2040 0x2050 0x2060 0x2070
-			0x2080 0x2090 0x20a0>;
-		fsl,drive-strength = <1>;
-		fsl,voltage = <1>;
-		fsl,pull-up = <1>;
+			MX28_PAD_SSP0_DATA0__SSP0_D0
+			MX28_PAD_SSP0_DATA1__SSP0_D1
+			MX28_PAD_SSP0_DATA2__SSP0_D2
+			MX28_PAD_SSP0_DATA3__SSP0_D3
+			MX28_PAD_SSP0_DATA4__SSP0_D4
+			MX28_PAD_SSP0_DATA5__SSP0_D5
+			MX28_PAD_SSP0_DATA6__SSP0_D6
+			MX28_PAD_SSP0_DATA7__SSP0_D7
+			MX28_PAD_SSP0_CMD__SSP0_CMD
+			MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+			MX28_PAD_SSP0_SCK__SSP0_SCK
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
 	};
 
 	mmc_cd_cfg: mmc-cd-cfg {
-		fsl,pinmux-ids = <0x2090>;
-		fsl,pull-up = <0>;
+		fsl,pinmux-ids = <MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 
 	mmc_sck_cfg: mmc-sck-cfg {
-		fsl,pinmux-ids = <0x20a0>;
-		fsl,drive-strength = <2>;
-		fsl,pull-up = <0>;
+		fsl,pinmux-ids = <MX28_PAD_SSP0_SCK__SSP0_SCK>;
+		fsl,drive-strength = <MXS_DRIVE_12mA>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 };
 
@@ -112,811 +121,7 @@ adjusting the configuration for pins card-detection and clock from what group
 node mmc0-8bit defines.  Only the configuration properties to be adjusted need
 to be listed in the config nodes.
 
-Valid values for i.MX28 pinmux-id:
-
-pinmux						id
-------						--
-MX28_PAD_GPMI_D00__GPMI_D0			0x0000
-MX28_PAD_GPMI_D01__GPMI_D1			0x0010
-MX28_PAD_GPMI_D02__GPMI_D2			0x0020
-MX28_PAD_GPMI_D03__GPMI_D3			0x0030
-MX28_PAD_GPMI_D04__GPMI_D4			0x0040
-MX28_PAD_GPMI_D05__GPMI_D5			0x0050
-MX28_PAD_GPMI_D06__GPMI_D6			0x0060
-MX28_PAD_GPMI_D07__GPMI_D7			0x0070
-MX28_PAD_GPMI_CE0N__GPMI_CE0N			0x0100
-MX28_PAD_GPMI_CE1N__GPMI_CE1N			0x0110
-MX28_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
-MX28_PAD_GPMI_CE3N__GPMI_CE3N			0x0130
-MX28_PAD_GPMI_RDY0__GPMI_READY0			0x0140
-MX28_PAD_GPMI_RDY1__GPMI_READY1			0x0150
-MX28_PAD_GPMI_RDY2__GPMI_READY2			0x0160
-MX28_PAD_GPMI_RDY3__GPMI_READY3			0x0170
-MX28_PAD_GPMI_RDN__GPMI_RDN			0x0180
-MX28_PAD_GPMI_WRN__GPMI_WRN			0x0190
-MX28_PAD_GPMI_ALE__GPMI_ALE			0x01a0
-MX28_PAD_GPMI_CLE__GPMI_CLE			0x01b0
-MX28_PAD_GPMI_RESETN__GPMI_RESETN		0x01c0
-MX28_PAD_LCD_D00__LCD_D0			0x1000
-MX28_PAD_LCD_D01__LCD_D1			0x1010
-MX28_PAD_LCD_D02__LCD_D2			0x1020
-MX28_PAD_LCD_D03__LCD_D3			0x1030
-MX28_PAD_LCD_D04__LCD_D4			0x1040
-MX28_PAD_LCD_D05__LCD_D5			0x1050
-MX28_PAD_LCD_D06__LCD_D6			0x1060
-MX28_PAD_LCD_D07__LCD_D7			0x1070
-MX28_PAD_LCD_D08__LCD_D8			0x1080
-MX28_PAD_LCD_D09__LCD_D9			0x1090
-MX28_PAD_LCD_D10__LCD_D10			0x10a0
-MX28_PAD_LCD_D11__LCD_D11			0x10b0
-MX28_PAD_LCD_D12__LCD_D12			0x10c0
-MX28_PAD_LCD_D13__LCD_D13			0x10d0
-MX28_PAD_LCD_D14__LCD_D14			0x10e0
-MX28_PAD_LCD_D15__LCD_D15			0x10f0
-MX28_PAD_LCD_D16__LCD_D16			0x1100
-MX28_PAD_LCD_D17__LCD_D17			0x1110
-MX28_PAD_LCD_D18__LCD_D18			0x1120
-MX28_PAD_LCD_D19__LCD_D19			0x1130
-MX28_PAD_LCD_D20__LCD_D20			0x1140
-MX28_PAD_LCD_D21__LCD_D21			0x1150
-MX28_PAD_LCD_D22__LCD_D22			0x1160
-MX28_PAD_LCD_D23__LCD_D23			0x1170
-MX28_PAD_LCD_RD_E__LCD_RD_E			0x1180
-MX28_PAD_LCD_WR_RWN__LCD_WR_RWN			0x1190
-MX28_PAD_LCD_RS__LCD_RS				0x11a0
-MX28_PAD_LCD_CS__LCD_CS				0x11b0
-MX28_PAD_LCD_VSYNC__LCD_VSYNC			0x11c0
-MX28_PAD_LCD_HSYNC__LCD_HSYNC			0x11d0
-MX28_PAD_LCD_DOTCLK__LCD_DOTCLK			0x11e0
-MX28_PAD_LCD_ENABLE__LCD_ENABLE			0x11f0
-MX28_PAD_SSP0_DATA0__SSP0_D0			0x2000
-MX28_PAD_SSP0_DATA1__SSP0_D1			0x2010
-MX28_PAD_SSP0_DATA2__SSP0_D2			0x2020
-MX28_PAD_SSP0_DATA3__SSP0_D3			0x2030
-MX28_PAD_SSP0_DATA4__SSP0_D4			0x2040
-MX28_PAD_SSP0_DATA5__SSP0_D5			0x2050
-MX28_PAD_SSP0_DATA6__SSP0_D6			0x2060
-MX28_PAD_SSP0_DATA7__SSP0_D7			0x2070
-MX28_PAD_SSP0_CMD__SSP0_CMD			0x2080
-MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT		0x2090
-MX28_PAD_SSP0_SCK__SSP0_SCK			0x20a0
-MX28_PAD_SSP1_SCK__SSP1_SCK			0x20c0
-MX28_PAD_SSP1_CMD__SSP1_CMD			0x20d0
-MX28_PAD_SSP1_DATA0__SSP1_D0			0x20e0
-MX28_PAD_SSP1_DATA3__SSP1_D3			0x20f0
-MX28_PAD_SSP2_SCK__SSP2_SCK			0x2100
-MX28_PAD_SSP2_MOSI__SSP2_CMD			0x2110
-MX28_PAD_SSP2_MISO__SSP2_D0			0x2120
-MX28_PAD_SSP2_SS0__SSP2_D3			0x2130
-MX28_PAD_SSP2_SS1__SSP2_D4			0x2140
-MX28_PAD_SSP2_SS2__SSP2_D5			0x2150
-MX28_PAD_SSP3_SCK__SSP3_SCK			0x2180
-MX28_PAD_SSP3_MOSI__SSP3_CMD			0x2190
-MX28_PAD_SSP3_MISO__SSP3_D0			0x21a0
-MX28_PAD_SSP3_SS0__SSP3_D3			0x21b0
-MX28_PAD_AUART0_RX__AUART0_RX			0x3000
-MX28_PAD_AUART0_TX__AUART0_TX			0x3010
-MX28_PAD_AUART0_CTS__AUART0_CTS			0x3020
-MX28_PAD_AUART0_RTS__AUART0_RTS			0x3030
-MX28_PAD_AUART1_RX__AUART1_RX			0x3040
-MX28_PAD_AUART1_TX__AUART1_TX			0x3050
-MX28_PAD_AUART1_CTS__AUART1_CTS			0x3060
-MX28_PAD_AUART1_RTS__AUART1_RTS			0x3070
-MX28_PAD_AUART2_RX__AUART2_RX			0x3080
-MX28_PAD_AUART2_TX__AUART2_TX			0x3090
-MX28_PAD_AUART2_CTS__AUART2_CTS			0x30a0
-MX28_PAD_AUART2_RTS__AUART2_RTS			0x30b0
-MX28_PAD_AUART3_RX__AUART3_RX			0x30c0
-MX28_PAD_AUART3_TX__AUART3_TX			0x30d0
-MX28_PAD_AUART3_CTS__AUART3_CTS			0x30e0
-MX28_PAD_AUART3_RTS__AUART3_RTS			0x30f0
-MX28_PAD_PWM0__PWM_0				0x3100
-MX28_PAD_PWM1__PWM_1				0x3110
-MX28_PAD_PWM2__PWM_2				0x3120
-MX28_PAD_SAIF0_MCLK__SAIF0_MCLK			0x3140
-MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK		0x3150
-MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK		0x3160
-MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0		0x3170
-MX28_PAD_I2C0_SCL__I2C0_SCL			0x3180
-MX28_PAD_I2C0_SDA__I2C0_SDA			0x3190
-MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0		0x31a0
-MX28_PAD_SPDIF__SPDIF_TX			0x31b0
-MX28_PAD_PWM3__PWM_3				0x31c0
-MX28_PAD_PWM4__PWM_4				0x31d0
-MX28_PAD_LCD_RESET__LCD_RESET			0x31e0
-MX28_PAD_ENET0_MDC__ENET0_MDC			0x4000
-MX28_PAD_ENET0_MDIO__ENET0_MDIO			0x4010
-MX28_PAD_ENET0_RX_EN__ENET0_RX_EN		0x4020
-MX28_PAD_ENET0_RXD0__ENET0_RXD0			0x4030
-MX28_PAD_ENET0_RXD1__ENET0_RXD1			0x4040
-MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK		0x4050
-MX28_PAD_ENET0_TX_EN__ENET0_TX_EN		0x4060
-MX28_PAD_ENET0_TXD0__ENET0_TXD0			0x4070
-MX28_PAD_ENET0_TXD1__ENET0_TXD1			0x4080
-MX28_PAD_ENET0_RXD2__ENET0_RXD2			0x4090
-MX28_PAD_ENET0_RXD3__ENET0_RXD3			0x40a0
-MX28_PAD_ENET0_TXD2__ENET0_TXD2			0x40b0
-MX28_PAD_ENET0_TXD3__ENET0_TXD3			0x40c0
-MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK		0x40d0
-MX28_PAD_ENET0_COL__ENET0_COL			0x40e0
-MX28_PAD_ENET0_CRS__ENET0_CRS			0x40f0
-MX28_PAD_ENET_CLK__CLKCTRL_ENET			0x4100
-MX28_PAD_JTAG_RTCK__JTAG_RTCK			0x4140
-MX28_PAD_EMI_D00__EMI_DATA0			0x5000
-MX28_PAD_EMI_D01__EMI_DATA1			0x5010
-MX28_PAD_EMI_D02__EMI_DATA2			0x5020
-MX28_PAD_EMI_D03__EMI_DATA3			0x5030
-MX28_PAD_EMI_D04__EMI_DATA4			0x5040
-MX28_PAD_EMI_D05__EMI_DATA5			0x5050
-MX28_PAD_EMI_D06__EMI_DATA6			0x5060
-MX28_PAD_EMI_D07__EMI_DATA7			0x5070
-MX28_PAD_EMI_D08__EMI_DATA8			0x5080
-MX28_PAD_EMI_D09__EMI_DATA9			0x5090
-MX28_PAD_EMI_D10__EMI_DATA10			0x50a0
-MX28_PAD_EMI_D11__EMI_DATA11			0x50b0
-MX28_PAD_EMI_D12__EMI_DATA12			0x50c0
-MX28_PAD_EMI_D13__EMI_DATA13			0x50d0
-MX28_PAD_EMI_D14__EMI_DATA14			0x50e0
-MX28_PAD_EMI_D15__EMI_DATA15			0x50f0
-MX28_PAD_EMI_ODT0__EMI_ODT0			0x5100
-MX28_PAD_EMI_DQM0__EMI_DQM0			0x5110
-MX28_PAD_EMI_ODT1__EMI_ODT1			0x5120
-MX28_PAD_EMI_DQM1__EMI_DQM1			0x5130
-MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK	0x5140
-MX28_PAD_EMI_CLK__EMI_CLK			0x5150
-MX28_PAD_EMI_DQS0__EMI_DQS0			0x5160
-MX28_PAD_EMI_DQS1__EMI_DQS1			0x5170
-MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN		0x51a0
-MX28_PAD_EMI_A00__EMI_ADDR0			0x6000
-MX28_PAD_EMI_A01__EMI_ADDR1			0x6010
-MX28_PAD_EMI_A02__EMI_ADDR2			0x6020
-MX28_PAD_EMI_A03__EMI_ADDR3			0x6030
-MX28_PAD_EMI_A04__EMI_ADDR4			0x6040
-MX28_PAD_EMI_A05__EMI_ADDR5			0x6050
-MX28_PAD_EMI_A06__EMI_ADDR6			0x6060
-MX28_PAD_EMI_A07__EMI_ADDR7			0x6070
-MX28_PAD_EMI_A08__EMI_ADDR8			0x6080
-MX28_PAD_EMI_A09__EMI_ADDR9			0x6090
-MX28_PAD_EMI_A10__EMI_ADDR10			0x60a0
-MX28_PAD_EMI_A11__EMI_ADDR11			0x60b0
-MX28_PAD_EMI_A12__EMI_ADDR12			0x60c0
-MX28_PAD_EMI_A13__EMI_ADDR13			0x60d0
-MX28_PAD_EMI_A14__EMI_ADDR14			0x60e0
-MX28_PAD_EMI_BA0__EMI_BA0			0x6100
-MX28_PAD_EMI_BA1__EMI_BA1			0x6110
-MX28_PAD_EMI_BA2__EMI_BA2			0x6120
-MX28_PAD_EMI_CASN__EMI_CASN			0x6130
-MX28_PAD_EMI_RASN__EMI_RASN			0x6140
-MX28_PAD_EMI_WEN__EMI_WEN			0x6150
-MX28_PAD_EMI_CE0N__EMI_CE0N			0x6160
-MX28_PAD_EMI_CE1N__EMI_CE1N			0x6170
-MX28_PAD_EMI_CKE__EMI_CKE			0x6180
-MX28_PAD_GPMI_D00__SSP1_D0			0x0001
-MX28_PAD_GPMI_D01__SSP1_D1			0x0011
-MX28_PAD_GPMI_D02__SSP1_D2			0x0021
-MX28_PAD_GPMI_D03__SSP1_D3			0x0031
-MX28_PAD_GPMI_D04__SSP1_D4			0x0041
-MX28_PAD_GPMI_D05__SSP1_D5			0x0051
-MX28_PAD_GPMI_D06__SSP1_D6			0x0061
-MX28_PAD_GPMI_D07__SSP1_D7			0x0071
-MX28_PAD_GPMI_CE0N__SSP3_D0			0x0101
-MX28_PAD_GPMI_CE1N__SSP3_D3			0x0111
-MX28_PAD_GPMI_CE2N__CAN1_TX			0x0121
-MX28_PAD_GPMI_CE3N__CAN1_RX			0x0131
-MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT		0x0141
-MX28_PAD_GPMI_RDY1__SSP1_CMD			0x0151
-MX28_PAD_GPMI_RDY2__CAN0_TX			0x0161
-MX28_PAD_GPMI_RDY3__CAN0_RX			0x0171
-MX28_PAD_GPMI_RDN__SSP3_SCK			0x0181
-MX28_PAD_GPMI_WRN__SSP1_SCK			0x0191
-MX28_PAD_GPMI_ALE__SSP3_D1			0x01a1
-MX28_PAD_GPMI_CLE__SSP3_D2			0x01b1
-MX28_PAD_GPMI_RESETN__SSP3_CMD			0x01c1
-MX28_PAD_LCD_D03__ETM_DA8			0x1031
-MX28_PAD_LCD_D04__ETM_DA9			0x1041
-MX28_PAD_LCD_D08__ETM_DA3			0x1081
-MX28_PAD_LCD_D09__ETM_DA4			0x1091
-MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT		0x1141
-MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN		0x1151
-MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT		0x1161
-MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN		0x1171
-MX28_PAD_LCD_RD_E__LCD_VSYNC			0x1181
-MX28_PAD_LCD_WR_RWN__LCD_HSYNC			0x1191
-MX28_PAD_LCD_RS__LCD_DOTCLK			0x11a1
-MX28_PAD_LCD_CS__LCD_ENABLE			0x11b1
-MX28_PAD_LCD_VSYNC__SAIF1_SDATA0		0x11c1
-MX28_PAD_LCD_HSYNC__SAIF1_SDATA1		0x11d1
-MX28_PAD_LCD_DOTCLK__SAIF1_MCLK			0x11e1
-MX28_PAD_SSP0_DATA4__SSP2_D0			0x2041
-MX28_PAD_SSP0_DATA5__SSP2_D3			0x2051
-MX28_PAD_SSP0_DATA6__SSP2_CMD			0x2061
-MX28_PAD_SSP0_DATA7__SSP2_SCK			0x2071
-MX28_PAD_SSP1_SCK__SSP2_D1			0x20c1
-MX28_PAD_SSP1_CMD__SSP2_D2			0x20d1
-MX28_PAD_SSP1_DATA0__SSP2_D6			0x20e1
-MX28_PAD_SSP1_DATA3__SSP2_D7			0x20f1
-MX28_PAD_SSP2_SCK__AUART2_RX			0x2101
-MX28_PAD_SSP2_MOSI__AUART2_TX			0x2111
-MX28_PAD_SSP2_MISO__AUART3_RX			0x2121
-MX28_PAD_SSP2_SS0__AUART3_TX			0x2131
-MX28_PAD_SSP2_SS1__SSP2_D1			0x2141
-MX28_PAD_SSP2_SS2__SSP2_D2			0x2151
-MX28_PAD_SSP3_SCK__AUART4_TX			0x2181
-MX28_PAD_SSP3_MOSI__AUART4_RX			0x2191
-MX28_PAD_SSP3_MISO__AUART4_RTS			0x21a1
-MX28_PAD_SSP3_SS0__AUART4_CTS			0x21b1
-MX28_PAD_AUART0_RX__I2C0_SCL			0x3001
-MX28_PAD_AUART0_TX__I2C0_SDA			0x3011
-MX28_PAD_AUART0_CTS__AUART4_RX			0x3021
-MX28_PAD_AUART0_RTS__AUART4_TX			0x3031
-MX28_PAD_AUART1_RX__SSP2_CARD_DETECT		0x3041
-MX28_PAD_AUART1_TX__SSP3_CARD_DETECT		0x3051
-MX28_PAD_AUART1_CTS__USB0_OVERCURRENT		0x3061
-MX28_PAD_AUART1_RTS__USB0_ID			0x3071
-MX28_PAD_AUART2_RX__SSP3_D1			0x3081
-MX28_PAD_AUART2_TX__SSP3_D2			0x3091
-MX28_PAD_AUART2_CTS__I2C1_SCL			0x30a1
-MX28_PAD_AUART2_RTS__I2C1_SDA			0x30b1
-MX28_PAD_AUART3_RX__CAN0_TX			0x30c1
-MX28_PAD_AUART3_TX__CAN0_RX			0x30d1
-MX28_PAD_AUART3_CTS__CAN1_TX			0x30e1
-MX28_PAD_AUART3_RTS__CAN1_RX			0x30f1
-MX28_PAD_PWM0__I2C1_SCL				0x3101
-MX28_PAD_PWM1__I2C1_SDA				0x3111
-MX28_PAD_PWM2__USB0_ID				0x3121
-MX28_PAD_SAIF0_MCLK__PWM_3			0x3141
-MX28_PAD_SAIF0_LRCLK__PWM_4			0x3151
-MX28_PAD_SAIF0_BITCLK__PWM_5			0x3161
-MX28_PAD_SAIF0_SDATA0__PWM_6			0x3171
-MX28_PAD_I2C0_SCL__TIMROT_ROTARYA		0x3181
-MX28_PAD_I2C0_SDA__TIMROT_ROTARYB		0x3191
-MX28_PAD_SAIF1_SDATA0__PWM_7			0x31a1
-MX28_PAD_LCD_RESET__LCD_VSYNC			0x31e1
-MX28_PAD_ENET0_MDC__GPMI_CE4N			0x4001
-MX28_PAD_ENET0_MDIO__GPMI_CE5N			0x4011
-MX28_PAD_ENET0_RX_EN__GPMI_CE6N			0x4021
-MX28_PAD_ENET0_RXD0__GPMI_CE7N			0x4031
-MX28_PAD_ENET0_RXD1__GPMI_READY4		0x4041
-MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER		0x4051
-MX28_PAD_ENET0_TX_EN__GPMI_READY5		0x4061
-MX28_PAD_ENET0_TXD0__GPMI_READY6		0x4071
-MX28_PAD_ENET0_TXD1__GPMI_READY7		0x4081
-MX28_PAD_ENET0_RXD2__ENET1_RXD0			0x4091
-MX28_PAD_ENET0_RXD3__ENET1_RXD1			0x40a1
-MX28_PAD_ENET0_TXD2__ENET1_TXD0			0x40b1
-MX28_PAD_ENET0_TXD3__ENET1_TXD1			0x40c1
-MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER		0x40d1
-MX28_PAD_ENET0_COL__ENET1_TX_EN			0x40e1
-MX28_PAD_ENET0_CRS__ENET1_RX_EN			0x40f1
-MX28_PAD_GPMI_CE2N__ENET0_RX_ER			0x0122
-MX28_PAD_GPMI_CE3N__SAIF1_MCLK			0x0132
-MX28_PAD_GPMI_RDY0__USB0_ID			0x0142
-MX28_PAD_GPMI_RDY2__ENET0_TX_ER			0x0162
-MX28_PAD_GPMI_RDY3__HSADC_TRIGGER		0x0172
-MX28_PAD_GPMI_ALE__SSP3_D4			0x01a2
-MX28_PAD_GPMI_CLE__SSP3_D5			0x01b2
-MX28_PAD_LCD_D00__ETM_DA0			0x1002
-MX28_PAD_LCD_D01__ETM_DA1			0x1012
-MX28_PAD_LCD_D02__ETM_DA2			0x1022
-MX28_PAD_LCD_D03__ETM_DA3			0x1032
-MX28_PAD_LCD_D04__ETM_DA4			0x1042
-MX28_PAD_LCD_D05__ETM_DA5			0x1052
-MX28_PAD_LCD_D06__ETM_DA6			0x1062
-MX28_PAD_LCD_D07__ETM_DA7			0x1072
-MX28_PAD_LCD_D08__ETM_DA8			0x1082
-MX28_PAD_LCD_D09__ETM_DA9			0x1092
-MX28_PAD_LCD_D10__ETM_DA10			0x10a2
-MX28_PAD_LCD_D11__ETM_DA11			0x10b2
-MX28_PAD_LCD_D12__ETM_DA12			0x10c2
-MX28_PAD_LCD_D13__ETM_DA13			0x10d2
-MX28_PAD_LCD_D14__ETM_DA14			0x10e2
-MX28_PAD_LCD_D15__ETM_DA15			0x10f2
-MX28_PAD_LCD_D16__ETM_DA7			0x1102
-MX28_PAD_LCD_D17__ETM_DA6			0x1112
-MX28_PAD_LCD_D18__ETM_DA5			0x1122
-MX28_PAD_LCD_D19__ETM_DA4			0x1132
-MX28_PAD_LCD_D20__ETM_DA3			0x1142
-MX28_PAD_LCD_D21__ETM_DA2			0x1152
-MX28_PAD_LCD_D22__ETM_DA1			0x1162
-MX28_PAD_LCD_D23__ETM_DA0			0x1172
-MX28_PAD_LCD_RD_E__ETM_TCTL			0x1182
-MX28_PAD_LCD_WR_RWN__ETM_TCLK			0x1192
-MX28_PAD_LCD_HSYNC__ETM_TCTL			0x11d2
-MX28_PAD_LCD_DOTCLK__ETM_TCLK			0x11e2
-MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT	0x20c2
-MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN		0x20d2
-MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT	0x20e2
-MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN	0x20f2
-MX28_PAD_SSP2_SCK__SAIF0_SDATA1			0x2102
-MX28_PAD_SSP2_MOSI__SAIF0_SDATA2		0x2112
-MX28_PAD_SSP2_MISO__SAIF1_SDATA1		0x2122
-MX28_PAD_SSP2_SS0__SAIF1_SDATA2			0x2132
-MX28_PAD_SSP2_SS1__USB1_OVERCURRENT		0x2142
-MX28_PAD_SSP2_SS2__USB0_OVERCURRENT		0x2152
-MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT	0x2182
-MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN	0x2192
-MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT	0x21a2
-MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN		0x21b2
-MX28_PAD_AUART0_RX__DUART_CTS			0x3002
-MX28_PAD_AUART0_TX__DUART_RTS			0x3012
-MX28_PAD_AUART0_CTS__DUART_RX			0x3022
-MX28_PAD_AUART0_RTS__DUART_TX			0x3032
-MX28_PAD_AUART1_RX__PWM_0			0x3042
-MX28_PAD_AUART1_TX__PWM_1			0x3052
-MX28_PAD_AUART1_CTS__TIMROT_ROTARYA		0x3062
-MX28_PAD_AUART1_RTS__TIMROT_ROTARYB		0x3072
-MX28_PAD_AUART2_RX__SSP3_D4			0x3082
-MX28_PAD_AUART2_TX__SSP3_D5			0x3092
-MX28_PAD_AUART2_CTS__SAIF1_BITCLK		0x30a2
-MX28_PAD_AUART2_RTS__SAIF1_LRCLK		0x30b2
-MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT	0x30c2
-MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN	0x30d2
-MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT	0x30e2
-MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN	0x30f2
-MX28_PAD_PWM0__DUART_RX				0x3102
-MX28_PAD_PWM1__DUART_TX				0x3112
-MX28_PAD_PWM2__USB1_OVERCURRENT			0x3122
-MX28_PAD_SAIF0_MCLK__AUART4_CTS			0x3142
-MX28_PAD_SAIF0_LRCLK__AUART4_RTS		0x3152
-MX28_PAD_SAIF0_BITCLK__AUART4_RX		0x3162
-MX28_PAD_SAIF0_SDATA0__AUART4_TX		0x3172
-MX28_PAD_I2C0_SCL__DUART_RX			0x3182
-MX28_PAD_I2C0_SDA__DUART_TX			0x3192
-MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1		0x31a2
-MX28_PAD_SPDIF__ENET1_RX_ER			0x31b2
-MX28_PAD_ENET0_MDC__SAIF0_SDATA1		0x4002
-MX28_PAD_ENET0_MDIO__SAIF0_SDATA2		0x4012
-MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1		0x4022
-MX28_PAD_ENET0_RXD0__SAIF1_SDATA2		0x4032
-MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT	0x4052
-MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT	0x4092
-MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN	0x40a2
-MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT	0x40b2
-MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN	0x40c2
-MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN	0x40d2
-MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT	0x40e2
-MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN	0x40f2
-MX28_PAD_GPMI_D00__GPIO_0_0			0x0003
-MX28_PAD_GPMI_D01__GPIO_0_1			0x0013
-MX28_PAD_GPMI_D02__GPIO_0_2			0x0023
-MX28_PAD_GPMI_D03__GPIO_0_3			0x0033
-MX28_PAD_GPMI_D04__GPIO_0_4			0x0043
-MX28_PAD_GPMI_D05__GPIO_0_5			0x0053
-MX28_PAD_GPMI_D06__GPIO_0_6			0x0063
-MX28_PAD_GPMI_D07__GPIO_0_7			0x0073
-MX28_PAD_GPMI_CE0N__GPIO_0_16			0x0103
-MX28_PAD_GPMI_CE1N__GPIO_0_17			0x0113
-MX28_PAD_GPMI_CE2N__GPIO_0_18			0x0123
-MX28_PAD_GPMI_CE3N__GPIO_0_19			0x0133
-MX28_PAD_GPMI_RDY0__GPIO_0_20			0x0143
-MX28_PAD_GPMI_RDY1__GPIO_0_21			0x0153
-MX28_PAD_GPMI_RDY2__GPIO_0_22			0x0163
-MX28_PAD_GPMI_RDY3__GPIO_0_23			0x0173
-MX28_PAD_GPMI_RDN__GPIO_0_24			0x0183
-MX28_PAD_GPMI_WRN__GPIO_0_25			0x0193
-MX28_PAD_GPMI_ALE__GPIO_0_26			0x01a3
-MX28_PAD_GPMI_CLE__GPIO_0_27			0x01b3
-MX28_PAD_GPMI_RESETN__GPIO_0_28			0x01c3
-MX28_PAD_LCD_D00__GPIO_1_0			0x1003
-MX28_PAD_LCD_D01__GPIO_1_1			0x1013
-MX28_PAD_LCD_D02__GPIO_1_2			0x1023
-MX28_PAD_LCD_D03__GPIO_1_3			0x1033
-MX28_PAD_LCD_D04__GPIO_1_4			0x1043
-MX28_PAD_LCD_D05__GPIO_1_5			0x1053
-MX28_PAD_LCD_D06__GPIO_1_6			0x1063
-MX28_PAD_LCD_D07__GPIO_1_7			0x1073
-MX28_PAD_LCD_D08__GPIO_1_8			0x1083
-MX28_PAD_LCD_D09__GPIO_1_9			0x1093
-MX28_PAD_LCD_D10__GPIO_1_10			0x10a3
-MX28_PAD_LCD_D11__GPIO_1_11			0x10b3
-MX28_PAD_LCD_D12__GPIO_1_12			0x10c3
-MX28_PAD_LCD_D13__GPIO_1_13			0x10d3
-MX28_PAD_LCD_D14__GPIO_1_14			0x10e3
-MX28_PAD_LCD_D15__GPIO_1_15			0x10f3
-MX28_PAD_LCD_D16__GPIO_1_16			0x1103
-MX28_PAD_LCD_D17__GPIO_1_17			0x1113
-MX28_PAD_LCD_D18__GPIO_1_18			0x1123
-MX28_PAD_LCD_D19__GPIO_1_19			0x1133
-MX28_PAD_LCD_D20__GPIO_1_20			0x1143
-MX28_PAD_LCD_D21__GPIO_1_21			0x1153
-MX28_PAD_LCD_D22__GPIO_1_22			0x1163
-MX28_PAD_LCD_D23__GPIO_1_23			0x1173
-MX28_PAD_LCD_RD_E__GPIO_1_24			0x1183
-MX28_PAD_LCD_WR_RWN__GPIO_1_25			0x1193
-MX28_PAD_LCD_RS__GPIO_1_26			0x11a3
-MX28_PAD_LCD_CS__GPIO_1_27			0x11b3
-MX28_PAD_LCD_VSYNC__GPIO_1_28			0x11c3
-MX28_PAD_LCD_HSYNC__GPIO_1_29			0x11d3
-MX28_PAD_LCD_DOTCLK__GPIO_1_30			0x11e3
-MX28_PAD_LCD_ENABLE__GPIO_1_31			0x11f3
-MX28_PAD_SSP0_DATA0__GPIO_2_0			0x2003
-MX28_PAD_SSP0_DATA1__GPIO_2_1			0x2013
-MX28_PAD_SSP0_DATA2__GPIO_2_2			0x2023
-MX28_PAD_SSP0_DATA3__GPIO_2_3			0x2033
-MX28_PAD_SSP0_DATA4__GPIO_2_4			0x2043
-MX28_PAD_SSP0_DATA5__GPIO_2_5			0x2053
-MX28_PAD_SSP0_DATA6__GPIO_2_6			0x2063
-MX28_PAD_SSP0_DATA7__GPIO_2_7			0x2073
-MX28_PAD_SSP0_CMD__GPIO_2_8			0x2083
-MX28_PAD_SSP0_DETECT__GPIO_2_9			0x2093
-MX28_PAD_SSP0_SCK__GPIO_2_10			0x20a3
-MX28_PAD_SSP1_SCK__GPIO_2_12			0x20c3
-MX28_PAD_SSP1_CMD__GPIO_2_13			0x20d3
-MX28_PAD_SSP1_DATA0__GPIO_2_14			0x20e3
-MX28_PAD_SSP1_DATA3__GPIO_2_15			0x20f3
-MX28_PAD_SSP2_SCK__GPIO_2_16			0x2103
-MX28_PAD_SSP2_MOSI__GPIO_2_17			0x2113
-MX28_PAD_SSP2_MISO__GPIO_2_18			0x2123
-MX28_PAD_SSP2_SS0__GPIO_2_19			0x2133
-MX28_PAD_SSP2_SS1__GPIO_2_20			0x2143
-MX28_PAD_SSP2_SS2__GPIO_2_21			0x2153
-MX28_PAD_SSP3_SCK__GPIO_2_24			0x2183
-MX28_PAD_SSP3_MOSI__GPIO_2_25			0x2193
-MX28_PAD_SSP3_MISO__GPIO_2_26			0x21a3
-MX28_PAD_SSP3_SS0__GPIO_2_27			0x21b3
-MX28_PAD_AUART0_RX__GPIO_3_0			0x3003
-MX28_PAD_AUART0_TX__GPIO_3_1			0x3013
-MX28_PAD_AUART0_CTS__GPIO_3_2			0x3023
-MX28_PAD_AUART0_RTS__GPIO_3_3			0x3033
-MX28_PAD_AUART1_RX__GPIO_3_4			0x3043
-MX28_PAD_AUART1_TX__GPIO_3_5			0x3053
-MX28_PAD_AUART1_CTS__GPIO_3_6			0x3063
-MX28_PAD_AUART1_RTS__GPIO_3_7			0x3073
-MX28_PAD_AUART2_RX__GPIO_3_8			0x3083
-MX28_PAD_AUART2_TX__GPIO_3_9			0x3093
-MX28_PAD_AUART2_CTS__GPIO_3_10			0x30a3
-MX28_PAD_AUART2_RTS__GPIO_3_11			0x30b3
-MX28_PAD_AUART3_RX__GPIO_3_12			0x30c3
-MX28_PAD_AUART3_TX__GPIO_3_13			0x30d3
-MX28_PAD_AUART3_CTS__GPIO_3_14			0x30e3
-MX28_PAD_AUART3_RTS__GPIO_3_15			0x30f3
-MX28_PAD_PWM0__GPIO_3_16			0x3103
-MX28_PAD_PWM1__GPIO_3_17			0x3113
-MX28_PAD_PWM2__GPIO_3_18			0x3123
-MX28_PAD_SAIF0_MCLK__GPIO_3_20			0x3143
-MX28_PAD_SAIF0_LRCLK__GPIO_3_21			0x3153
-MX28_PAD_SAIF0_BITCLK__GPIO_3_22		0x3163
-MX28_PAD_SAIF0_SDATA0__GPIO_3_23		0x3173
-MX28_PAD_I2C0_SCL__GPIO_3_24			0x3183
-MX28_PAD_I2C0_SDA__GPIO_3_25			0x3193
-MX28_PAD_SAIF1_SDATA0__GPIO_3_26		0x31a3
-MX28_PAD_SPDIF__GPIO_3_27			0x31b3
-MX28_PAD_PWM3__GPIO_3_28			0x31c3
-MX28_PAD_PWM4__GPIO_3_29			0x31d3
-MX28_PAD_LCD_RESET__GPIO_3_30			0x31e3
-MX28_PAD_ENET0_MDC__GPIO_4_0			0x4003
-MX28_PAD_ENET0_MDIO__GPIO_4_1			0x4013
-MX28_PAD_ENET0_RX_EN__GPIO_4_2			0x4023
-MX28_PAD_ENET0_RXD0__GPIO_4_3			0x4033
-MX28_PAD_ENET0_RXD1__GPIO_4_4			0x4043
-MX28_PAD_ENET0_TX_CLK__GPIO_4_5			0x4053
-MX28_PAD_ENET0_TX_EN__GPIO_4_6			0x4063
-MX28_PAD_ENET0_TXD0__GPIO_4_7			0x4073
-MX28_PAD_ENET0_TXD1__GPIO_4_8			0x4083
-MX28_PAD_ENET0_RXD2__GPIO_4_9			0x4093
-MX28_PAD_ENET0_RXD3__GPIO_4_10			0x40a3
-MX28_PAD_ENET0_TXD2__GPIO_4_11			0x40b3
-MX28_PAD_ENET0_TXD3__GPIO_4_12			0x40c3
-MX28_PAD_ENET0_RX_CLK__GPIO_4_13		0x40d3
-MX28_PAD_ENET0_COL__GPIO_4_14			0x40e3
-MX28_PAD_ENET0_CRS__GPIO_4_15			0x40f3
-MX28_PAD_ENET_CLK__GPIO_4_16			0x4103
-MX28_PAD_JTAG_RTCK__GPIO_4_20			0x4143
-
-Valid values for i.MX23 pinmux-id:
-
-pinmux						id
-------						--
-MX23_PAD_GPMI_D00__GPMI_D00			0x0000
-MX23_PAD_GPMI_D01__GPMI_D01			0x0010
-MX23_PAD_GPMI_D02__GPMI_D02			0x0020
-MX23_PAD_GPMI_D03__GPMI_D03			0x0030
-MX23_PAD_GPMI_D04__GPMI_D04			0x0040
-MX23_PAD_GPMI_D05__GPMI_D05			0x0050
-MX23_PAD_GPMI_D06__GPMI_D06			0x0060
-MX23_PAD_GPMI_D07__GPMI_D07			0x0070
-MX23_PAD_GPMI_D08__GPMI_D08			0x0080
-MX23_PAD_GPMI_D09__GPMI_D09			0x0090
-MX23_PAD_GPMI_D10__GPMI_D10			0x00a0
-MX23_PAD_GPMI_D11__GPMI_D11			0x00b0
-MX23_PAD_GPMI_D12__GPMI_D12			0x00c0
-MX23_PAD_GPMI_D13__GPMI_D13			0x00d0
-MX23_PAD_GPMI_D14__GPMI_D14			0x00e0
-MX23_PAD_GPMI_D15__GPMI_D15			0x00f0
-MX23_PAD_GPMI_CLE__GPMI_CLE			0x0100
-MX23_PAD_GPMI_ALE__GPMI_ALE			0x0110
-MX23_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
-MX23_PAD_GPMI_RDY0__GPMI_RDY0			0x0130
-MX23_PAD_GPMI_RDY1__GPMI_RDY1			0x0140
-MX23_PAD_GPMI_RDY2__GPMI_RDY2			0x0150
-MX23_PAD_GPMI_RDY3__GPMI_RDY3			0x0160
-MX23_PAD_GPMI_WPN__GPMI_WPN			0x0170
-MX23_PAD_GPMI_WRN__GPMI_WRN			0x0180
-MX23_PAD_GPMI_RDN__GPMI_RDN			0x0190
-MX23_PAD_AUART1_CTS__AUART1_CTS			0x01a0
-MX23_PAD_AUART1_RTS__AUART1_RTS			0x01b0
-MX23_PAD_AUART1_RX__AUART1_RX			0x01c0
-MX23_PAD_AUART1_TX__AUART1_TX			0x01d0
-MX23_PAD_I2C_SCL__I2C_SCL			0x01e0
-MX23_PAD_I2C_SDA__I2C_SDA			0x01f0
-MX23_PAD_LCD_D00__LCD_D00			0x1000
-MX23_PAD_LCD_D01__LCD_D01			0x1010
-MX23_PAD_LCD_D02__LCD_D02			0x1020
-MX23_PAD_LCD_D03__LCD_D03			0x1030
-MX23_PAD_LCD_D04__LCD_D04			0x1040
-MX23_PAD_LCD_D05__LCD_D05			0x1050
-MX23_PAD_LCD_D06__LCD_D06			0x1060
-MX23_PAD_LCD_D07__LCD_D07			0x1070
-MX23_PAD_LCD_D08__LCD_D08			0x1080
-MX23_PAD_LCD_D09__LCD_D09			0x1090
-MX23_PAD_LCD_D10__LCD_D10			0x10a0
-MX23_PAD_LCD_D11__LCD_D11			0x10b0
-MX23_PAD_LCD_D12__LCD_D12			0x10c0
-MX23_PAD_LCD_D13__LCD_D13			0x10d0
-MX23_PAD_LCD_D14__LCD_D14			0x10e0
-MX23_PAD_LCD_D15__LCD_D15			0x10f0
-MX23_PAD_LCD_D16__LCD_D16			0x1100
-MX23_PAD_LCD_D17__LCD_D17			0x1110
-MX23_PAD_LCD_RESET__LCD_RESET			0x1120
-MX23_PAD_LCD_RS__LCD_RS				0x1130
-MX23_PAD_LCD_WR__LCD_WR				0x1140
-MX23_PAD_LCD_CS__LCD_CS				0x1150
-MX23_PAD_LCD_DOTCK__LCD_DOTCK			0x1160
-MX23_PAD_LCD_ENABLE__LCD_ENABLE			0x1170
-MX23_PAD_LCD_HSYNC__LCD_HSYNC			0x1180
-MX23_PAD_LCD_VSYNC__LCD_VSYNC			0x1190
-MX23_PAD_PWM0__PWM0				0x11a0
-MX23_PAD_PWM1__PWM1				0x11b0
-MX23_PAD_PWM2__PWM2				0x11c0
-MX23_PAD_PWM3__PWM3				0x11d0
-MX23_PAD_PWM4__PWM4				0x11e0
-MX23_PAD_SSP1_CMD__SSP1_CMD			0x2000
-MX23_PAD_SSP1_DETECT__SSP1_DETECT		0x2010
-MX23_PAD_SSP1_DATA0__SSP1_DATA0			0x2020
-MX23_PAD_SSP1_DATA1__SSP1_DATA1			0x2030
-MX23_PAD_SSP1_DATA2__SSP1_DATA2			0x2040
-MX23_PAD_SSP1_DATA3__SSP1_DATA3			0x2050
-MX23_PAD_SSP1_SCK__SSP1_SCK			0x2060
-MX23_PAD_ROTARYA__ROTARYA			0x2070
-MX23_PAD_ROTARYB__ROTARYB			0x2080
-MX23_PAD_EMI_A00__EMI_A00			0x2090
-MX23_PAD_EMI_A01__EMI_A01			0x20a0
-MX23_PAD_EMI_A02__EMI_A02			0x20b0
-MX23_PAD_EMI_A03__EMI_A03			0x20c0
-MX23_PAD_EMI_A04__EMI_A04			0x20d0
-MX23_PAD_EMI_A05__EMI_A05			0x20e0
-MX23_PAD_EMI_A06__EMI_A06			0x20f0
-MX23_PAD_EMI_A07__EMI_A07			0x2100
-MX23_PAD_EMI_A08__EMI_A08			0x2110
-MX23_PAD_EMI_A09__EMI_A09			0x2120
-MX23_PAD_EMI_A10__EMI_A10			0x2130
-MX23_PAD_EMI_A11__EMI_A11			0x2140
-MX23_PAD_EMI_A12__EMI_A12			0x2150
-MX23_PAD_EMI_BA0__EMI_BA0			0x2160
-MX23_PAD_EMI_BA1__EMI_BA1			0x2170
-MX23_PAD_EMI_CASN__EMI_CASN			0x2180
-MX23_PAD_EMI_CE0N__EMI_CE0N			0x2190
-MX23_PAD_EMI_CE1N__EMI_CE1N			0x21a0
-MX23_PAD_GPMI_CE1N__GPMI_CE1N			0x21b0
-MX23_PAD_GPMI_CE0N__GPMI_CE0N			0x21c0
-MX23_PAD_EMI_CKE__EMI_CKE			0x21d0
-MX23_PAD_EMI_RASN__EMI_RASN			0x21e0
-MX23_PAD_EMI_WEN__EMI_WEN			0x21f0
-MX23_PAD_EMI_D00__EMI_D00			0x3000
-MX23_PAD_EMI_D01__EMI_D01			0x3010
-MX23_PAD_EMI_D02__EMI_D02			0x3020
-MX23_PAD_EMI_D03__EMI_D03			0x3030
-MX23_PAD_EMI_D04__EMI_D04			0x3040
-MX23_PAD_EMI_D05__EMI_D05			0x3050
-MX23_PAD_EMI_D06__EMI_D06			0x3060
-MX23_PAD_EMI_D07__EMI_D07			0x3070
-MX23_PAD_EMI_D08__EMI_D08			0x3080
-MX23_PAD_EMI_D09__EMI_D09			0x3090
-MX23_PAD_EMI_D10__EMI_D10			0x30a0
-MX23_PAD_EMI_D11__EMI_D11			0x30b0
-MX23_PAD_EMI_D12__EMI_D12			0x30c0
-MX23_PAD_EMI_D13__EMI_D13			0x30d0
-MX23_PAD_EMI_D14__EMI_D14			0x30e0
-MX23_PAD_EMI_D15__EMI_D15			0x30f0
-MX23_PAD_EMI_DQM0__EMI_DQM0			0x3100
-MX23_PAD_EMI_DQM1__EMI_DQM1			0x3110
-MX23_PAD_EMI_DQS0__EMI_DQS0			0x3120
-MX23_PAD_EMI_DQS1__EMI_DQS1			0x3130
-MX23_PAD_EMI_CLK__EMI_CLK			0x3140
-MX23_PAD_EMI_CLKN__EMI_CLKN			0x3150
-MX23_PAD_GPMI_D00__LCD_D8			0x0001
-MX23_PAD_GPMI_D01__LCD_D9			0x0011
-MX23_PAD_GPMI_D02__LCD_D10			0x0021
-MX23_PAD_GPMI_D03__LCD_D11			0x0031
-MX23_PAD_GPMI_D04__LCD_D12			0x0041
-MX23_PAD_GPMI_D05__LCD_D13			0x0051
-MX23_PAD_GPMI_D06__LCD_D14			0x0061
-MX23_PAD_GPMI_D07__LCD_D15			0x0071
-MX23_PAD_GPMI_D08__LCD_D18			0x0081
-MX23_PAD_GPMI_D09__LCD_D19			0x0091
-MX23_PAD_GPMI_D10__LCD_D20			0x00a1
-MX23_PAD_GPMI_D11__LCD_D21			0x00b1
-MX23_PAD_GPMI_D12__LCD_D22			0x00c1
-MX23_PAD_GPMI_D13__LCD_D23			0x00d1
-MX23_PAD_GPMI_D14__AUART2_RX			0x00e1
-MX23_PAD_GPMI_D15__AUART2_TX			0x00f1
-MX23_PAD_GPMI_CLE__LCD_D16			0x0101
-MX23_PAD_GPMI_ALE__LCD_D17			0x0111
-MX23_PAD_GPMI_CE2N__ATA_A2			0x0121
-MX23_PAD_AUART1_RTS__IR_CLK			0x01b1
-MX23_PAD_AUART1_RX__IR_RX			0x01c1
-MX23_PAD_AUART1_TX__IR_TX			0x01d1
-MX23_PAD_I2C_SCL__GPMI_RDY2			0x01e1
-MX23_PAD_I2C_SDA__GPMI_CE2N			0x01f1
-MX23_PAD_LCD_D00__ETM_DA8			0x1001
-MX23_PAD_LCD_D01__ETM_DA9			0x1011
-MX23_PAD_LCD_D02__ETM_DA10			0x1021
-MX23_PAD_LCD_D03__ETM_DA11			0x1031
-MX23_PAD_LCD_D04__ETM_DA12			0x1041
-MX23_PAD_LCD_D05__ETM_DA13			0x1051
-MX23_PAD_LCD_D06__ETM_DA14			0x1061
-MX23_PAD_LCD_D07__ETM_DA15			0x1071
-MX23_PAD_LCD_D08__ETM_DA0			0x1081
-MX23_PAD_LCD_D09__ETM_DA1			0x1091
-MX23_PAD_LCD_D10__ETM_DA2			0x10a1
-MX23_PAD_LCD_D11__ETM_DA3			0x10b1
-MX23_PAD_LCD_D12__ETM_DA4			0x10c1
-MX23_PAD_LCD_D13__ETM_DA5			0x10d1
-MX23_PAD_LCD_D14__ETM_DA6			0x10e1
-MX23_PAD_LCD_D15__ETM_DA7			0x10f1
-MX23_PAD_LCD_RESET__ETM_TCTL			0x1121
-MX23_PAD_LCD_RS__ETM_TCLK			0x1131
-MX23_PAD_LCD_DOTCK__GPMI_RDY3			0x1161
-MX23_PAD_LCD_ENABLE__I2C_SCL			0x1171
-MX23_PAD_LCD_HSYNC__I2C_SDA			0x1181
-MX23_PAD_LCD_VSYNC__LCD_BUSY			0x1191
-MX23_PAD_PWM0__ROTARYA				0x11a1
-MX23_PAD_PWM1__ROTARYB				0x11b1
-MX23_PAD_PWM2__GPMI_RDY3			0x11c1
-MX23_PAD_PWM3__ETM_TCTL				0x11d1
-MX23_PAD_PWM4__ETM_TCLK				0x11e1
-MX23_PAD_SSP1_DETECT__GPMI_CE3N			0x2011
-MX23_PAD_SSP1_DATA1__I2C_SCL			0x2031
-MX23_PAD_SSP1_DATA2__I2C_SDA			0x2041
-MX23_PAD_ROTARYA__AUART2_RTS			0x2071
-MX23_PAD_ROTARYB__AUART2_CTS			0x2081
-MX23_PAD_GPMI_D00__SSP2_DATA0			0x0002
-MX23_PAD_GPMI_D01__SSP2_DATA1			0x0012
-MX23_PAD_GPMI_D02__SSP2_DATA2			0x0022
-MX23_PAD_GPMI_D03__SSP2_DATA3			0x0032
-MX23_PAD_GPMI_D04__SSP2_DATA4			0x0042
-MX23_PAD_GPMI_D05__SSP2_DATA5			0x0052
-MX23_PAD_GPMI_D06__SSP2_DATA6			0x0062
-MX23_PAD_GPMI_D07__SSP2_DATA7			0x0072
-MX23_PAD_GPMI_D08__SSP1_DATA4			0x0082
-MX23_PAD_GPMI_D09__SSP1_DATA5			0x0092
-MX23_PAD_GPMI_D10__SSP1_DATA6			0x00a2
-MX23_PAD_GPMI_D11__SSP1_DATA7			0x00b2
-MX23_PAD_GPMI_D15__GPMI_CE3N			0x00f2
-MX23_PAD_GPMI_RDY0__SSP2_DETECT			0x0132
-MX23_PAD_GPMI_RDY1__SSP2_CMD			0x0142
-MX23_PAD_GPMI_WRN__SSP2_SCK			0x0182
-MX23_PAD_AUART1_CTS__SSP1_DATA4			0x01a2
-MX23_PAD_AUART1_RTS__SSP1_DATA5			0x01b2
-MX23_PAD_AUART1_RX__SSP1_DATA6			0x01c2
-MX23_PAD_AUART1_TX__SSP1_DATA7			0x01d2
-MX23_PAD_I2C_SCL__AUART1_TX			0x01e2
-MX23_PAD_I2C_SDA__AUART1_RX			0x01f2
-MX23_PAD_LCD_D08__SAIF2_SDATA0			0x1082
-MX23_PAD_LCD_D09__SAIF1_SDATA0			0x1092
-MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK		0x10a2
-MX23_PAD_LCD_D11__SAIF_LRCLK			0x10b2
-MX23_PAD_LCD_D12__SAIF2_SDATA1			0x10c2
-MX23_PAD_LCD_D13__SAIF2_SDATA2			0x10d2
-MX23_PAD_LCD_D14__SAIF1_SDATA2			0x10e2
-MX23_PAD_LCD_D15__SAIF1_SDATA1			0x10f2
-MX23_PAD_LCD_D16__SAIF_ALT_BITCLK		0x1102
-MX23_PAD_LCD_RESET__GPMI_CE3N			0x1122
-MX23_PAD_PWM0__DUART_RX				0x11a2
-MX23_PAD_PWM1__DUART_TX				0x11b2
-MX23_PAD_PWM3__AUART1_CTS			0x11d2
-MX23_PAD_PWM4__AUART1_RTS			0x11e2
-MX23_PAD_SSP1_CMD__JTAG_TDO			0x2002
-MX23_PAD_SSP1_DETECT__USB_OTG_ID		0x2012
-MX23_PAD_SSP1_DATA0__JTAG_TDI			0x2022
-MX23_PAD_SSP1_DATA1__JTAG_TCLK			0x2032
-MX23_PAD_SSP1_DATA2__JTAG_RTCK			0x2042
-MX23_PAD_SSP1_DATA3__JTAG_TMS			0x2052
-MX23_PAD_SSP1_SCK__JTAG_TRST			0x2062
-MX23_PAD_ROTARYA__SPDIF				0x2072
-MX23_PAD_ROTARYB__GPMI_CE3N			0x2082
-MX23_PAD_GPMI_D00__GPIO_0_0			0x0003
-MX23_PAD_GPMI_D01__GPIO_0_1			0x0013
-MX23_PAD_GPMI_D02__GPIO_0_2			0x0023
-MX23_PAD_GPMI_D03__GPIO_0_3			0x0033
-MX23_PAD_GPMI_D04__GPIO_0_4			0x0043
-MX23_PAD_GPMI_D05__GPIO_0_5			0x0053
-MX23_PAD_GPMI_D06__GPIO_0_6			0x0063
-MX23_PAD_GPMI_D07__GPIO_0_7			0x0073
-MX23_PAD_GPMI_D08__GPIO_0_8			0x0083
-MX23_PAD_GPMI_D09__GPIO_0_9			0x0093
-MX23_PAD_GPMI_D10__GPIO_0_10			0x00a3
-MX23_PAD_GPMI_D11__GPIO_0_11			0x00b3
-MX23_PAD_GPMI_D12__GPIO_0_12			0x00c3
-MX23_PAD_GPMI_D13__GPIO_0_13			0x00d3
-MX23_PAD_GPMI_D14__GPIO_0_14			0x00e3
-MX23_PAD_GPMI_D15__GPIO_0_15			0x00f3
-MX23_PAD_GPMI_CLE__GPIO_0_16			0x0103
-MX23_PAD_GPMI_ALE__GPIO_0_17			0x0113
-MX23_PAD_GPMI_CE2N__GPIO_0_18			0x0123
-MX23_PAD_GPMI_RDY0__GPIO_0_19			0x0133
-MX23_PAD_GPMI_RDY1__GPIO_0_20			0x0143
-MX23_PAD_GPMI_RDY2__GPIO_0_21			0x0153
-MX23_PAD_GPMI_RDY3__GPIO_0_22			0x0163
-MX23_PAD_GPMI_WPN__GPIO_0_23			0x0173
-MX23_PAD_GPMI_WRN__GPIO_0_24			0x0183
-MX23_PAD_GPMI_RDN__GPIO_0_25			0x0193
-MX23_PAD_AUART1_CTS__GPIO_0_26			0x01a3
-MX23_PAD_AUART1_RTS__GPIO_0_27			0x01b3
-MX23_PAD_AUART1_RX__GPIO_0_28			0x01c3
-MX23_PAD_AUART1_TX__GPIO_0_29			0x01d3
-MX23_PAD_I2C_SCL__GPIO_0_30			0x01e3
-MX23_PAD_I2C_SDA__GPIO_0_31			0x01f3
-MX23_PAD_LCD_D00__GPIO_1_0			0x1003
-MX23_PAD_LCD_D01__GPIO_1_1			0x1013
-MX23_PAD_LCD_D02__GPIO_1_2			0x1023
-MX23_PAD_LCD_D03__GPIO_1_3			0x1033
-MX23_PAD_LCD_D04__GPIO_1_4			0x1043
-MX23_PAD_LCD_D05__GPIO_1_5			0x1053
-MX23_PAD_LCD_D06__GPIO_1_6			0x1063
-MX23_PAD_LCD_D07__GPIO_1_7			0x1073
-MX23_PAD_LCD_D08__GPIO_1_8			0x1083
-MX23_PAD_LCD_D09__GPIO_1_9			0x1093
-MX23_PAD_LCD_D10__GPIO_1_10			0x10a3
-MX23_PAD_LCD_D11__GPIO_1_11			0x10b3
-MX23_PAD_LCD_D12__GPIO_1_12			0x10c3
-MX23_PAD_LCD_D13__GPIO_1_13			0x10d3
-MX23_PAD_LCD_D14__GPIO_1_14			0x10e3
-MX23_PAD_LCD_D15__GPIO_1_15			0x10f3
-MX23_PAD_LCD_D16__GPIO_1_16			0x1103
-MX23_PAD_LCD_D17__GPIO_1_17			0x1113
-MX23_PAD_LCD_RESET__GPIO_1_18			0x1123
-MX23_PAD_LCD_RS__GPIO_1_19			0x1133
-MX23_PAD_LCD_WR__GPIO_1_20			0x1143
-MX23_PAD_LCD_CS__GPIO_1_21			0x1153
-MX23_PAD_LCD_DOTCK__GPIO_1_22			0x1163
-MX23_PAD_LCD_ENABLE__GPIO_1_23			0x1173
-MX23_PAD_LCD_HSYNC__GPIO_1_24			0x1183
-MX23_PAD_LCD_VSYNC__GPIO_1_25			0x1193
-MX23_PAD_PWM0__GPIO_1_26			0x11a3
-MX23_PAD_PWM1__GPIO_1_27			0x11b3
-MX23_PAD_PWM2__GPIO_1_28			0x11c3
-MX23_PAD_PWM3__GPIO_1_29			0x11d3
-MX23_PAD_PWM4__GPIO_1_30			0x11e3
-MX23_PAD_SSP1_CMD__GPIO_2_0			0x2003
-MX23_PAD_SSP1_DETECT__GPIO_2_1			0x2013
-MX23_PAD_SSP1_DATA0__GPIO_2_2			0x2023
-MX23_PAD_SSP1_DATA1__GPIO_2_3			0x2033
-MX23_PAD_SSP1_DATA2__GPIO_2_4			0x2043
-MX23_PAD_SSP1_DATA3__GPIO_2_5			0x2053
-MX23_PAD_SSP1_SCK__GPIO_2_6			0x2063
-MX23_PAD_ROTARYA__GPIO_2_7			0x2073
-MX23_PAD_ROTARYB__GPIO_2_8			0x2083
-MX23_PAD_EMI_A00__GPIO_2_9			0x2093
-MX23_PAD_EMI_A01__GPIO_2_10			0x20a3
-MX23_PAD_EMI_A02__GPIO_2_11			0x20b3
-MX23_PAD_EMI_A03__GPIO_2_12			0x20c3
-MX23_PAD_EMI_A04__GPIO_2_13			0x20d3
-MX23_PAD_EMI_A05__GPIO_2_14			0x20e3
-MX23_PAD_EMI_A06__GPIO_2_15			0x20f3
-MX23_PAD_EMI_A07__GPIO_2_16			0x2103
-MX23_PAD_EMI_A08__GPIO_2_17			0x2113
-MX23_PAD_EMI_A09__GPIO_2_18			0x2123
-MX23_PAD_EMI_A10__GPIO_2_19			0x2133
-MX23_PAD_EMI_A11__GPIO_2_20			0x2143
-MX23_PAD_EMI_A12__GPIO_2_21			0x2153
-MX23_PAD_EMI_BA0__GPIO_2_22			0x2163
-MX23_PAD_EMI_BA1__GPIO_2_23			0x2173
-MX23_PAD_EMI_CASN__GPIO_2_24			0x2183
-MX23_PAD_EMI_CE0N__GPIO_2_25			0x2193
-MX23_PAD_EMI_CE1N__GPIO_2_26			0x21a3
-MX23_PAD_GPMI_CE1N__GPIO_2_27			0x21b3
-MX23_PAD_GPMI_CE0N__GPIO_2_28			0x21c3
-MX23_PAD_EMI_CKE__GPIO_2_29			0x21d3
-MX23_PAD_EMI_RASN__GPIO_2_30			0x21e3
-MX23_PAD_EMI_WEN__GPIO_2_31			0x21f3
+Valid values for i.MX28/i.MX23 pinmux-id are defined in
+arch/arm/boot/dts/imx28-pinfunc.h and arch/arm/boot/dts/imx23-pinfunc.h.
+The definitions for the padconfig properties can be found in
+arch/arm/boot/dts/mxs-pinfunc.h.
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
index 5a02e30dd262..7069a0b84e3a 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
@@ -72,6 +72,13 @@ Optional properties:
 		/* pin base, nr pins & gpio function */
 		pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1>;
 
+- interrupt-controller : standard interrupt controller binding if using
+  interrupts for wake-up events for example. In this case pinctrl-single
+  is set up as a chained interrupt controller and the wake-up interrupts
+  can be requested by the drivers using request_irq().
+
+- #interrupt-cells : standard interrupt binding if using interrupts
+
 This driver assumes that there is only one register for each pin (unless the
 pinctrl-single,bit-per-mux is set), and uses the common pinctrl bindings as
 specified in the pinctrl-bindings.txt document in this directory.
@@ -121,6 +128,8 @@ pmx_core: pinmux@4a100040 {
 	reg = <0x4a100040 0x0196>;
 	#address-cells = <1>;
 	#size-cells = <0>;
+	#interrupt-cells = <1>;
+	interrupt-controller;
 	pinctrl-single,register-width = <16>;
 	pinctrl-single,function-mask = <0xffff>;
 };
@@ -131,6 +140,8 @@ pmx_wkup: pinmux@4a31e040 {
 	reg = <0x4a31e040 0x0038>;
 	#address-cells = <1>;
 	#size-cells = <0>;
+	#interrupt-cells = <1>;
+	interrupt-controller;
 	pinctrl-single,register-width = <16>;
 	pinctrl-single,function-mask = <0xffff>;
 };
diff --git a/Documentation/devicetree/bindings/usb/ux500-usb.txt b/Documentation/devicetree/bindings/usb/ux500-usb.txt
index 330d6ec15401..439a41c79afa 100644
--- a/Documentation/devicetree/bindings/usb/ux500-usb.txt
+++ b/Documentation/devicetree/bindings/usb/ux500-usb.txt
@@ -15,7 +15,7 @@ Optional properties:
 Example:
 
 usb_per5@a03e0000 {
-	compatible = "stericsson,db8500-musb", "mentor,musb";
+	compatible = "stericsson,db8500-musb";
 	reg = <0xa03e0000 0x10000>;
 	interrupts = <0 23 0x4>;
 	interrupt-names = "mc";
diff --git a/Documentation/devicetree/bindings/video/exynos_hdmi.txt b/Documentation/devicetree/bindings/video/exynos_hdmi.txt
index 323983be3c30..50decf8e1b90 100644
--- a/Documentation/devicetree/bindings/video/exynos_hdmi.txt
+++ b/Documentation/devicetree/bindings/video/exynos_hdmi.txt
@@ -12,7 +12,19 @@ Required properties:
 	a) phandle of the gpio controller node.
 	b) pin number within the gpio controller.
 	c) optional flags and pull up/down.
-
+- clocks: list of clock IDs from SoC clock driver.
+	a) hdmi: Gate of HDMI IP bus clock.
+	b) sclk_hdmi: Gate of HDMI special clock.
+	c) sclk_pixel: Pixel special clock, one of the two possible inputs of
+		HDMI clock mux.
+	d) sclk_hdmiphy: HDMI PHY clock output, one of two possible inputs of
+		HDMI clock mux.
+	e) mout_hdmi: It is required by the driver to switch between the 2
+		parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable
+		after configuration, parent is set to sclk_hdmiphy else
+		sclk_pixel.
+- clock-names: aliases as per driver requirements for above clock IDs:
+	"hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi".
 Example:
 
 	hdmi {
diff --git a/Documentation/devicetree/bindings/video/exynos_mixer.txt b/Documentation/devicetree/bindings/video/exynos_mixer.txt
index 3334b0a8e343..7bfde9c9d658 100644
--- a/Documentation/devicetree/bindings/video/exynos_mixer.txt
+++ b/Documentation/devicetree/bindings/video/exynos_mixer.txt
@@ -10,6 +10,10 @@ Required properties:
 - reg: physical base address of the mixer and length of memory mapped
 	region.
 - interrupts: interrupt number to the cpu.
+- clocks: list of clock IDs from SoC clock driver.
+	a) mixer: Gate of Mixer IP bus clock.
+	b) sclk_hdmi: HDMI Special clock, one of the two possible inputs of
+               mixer mux.
 
 Example: