Merge tag 'spi-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc

Pull spi updates from Mark Brown:
 "No framework work here, only a bunch of driver updates of varying
  sizes:

   - Factoring out of the core hardware support from the MXS MMC driver
     by Marek Vasut to allow the hardware to also be used for SPI.
   - Lots of error handling cleanups from Guenter Roeck
   - Removal of the existing Tegra driver which is quite comprehensively
     broken as detailed in the changelog for the removal.
   - DT suppport for the PL022 and GPIO drivers.
   - pinctrl support for OMAP and PL022."

Pulling from Mark Brown as Grant Likely is still busy moving.

* tag 'spi-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: (53 commits)
  spi: remove completely broken Tegra driver
  spi/imx: set the inactive state of the clock according to the clock polarity
  spi/pl022: get/put resources on suspend/resume
  spi/pl022: use more managed resources
  spi/pl022: Devicetree support w/o platform data
  spi/s3c64xx: Don't free controller_data on non-dt platforms
  spi: omap2-mcspi: add pinctrl support
  spi/pl022: adopt pinctrl support
  spi: omap2-mcspi: Cleanup the omap2_mcspi_txrx_dma function
  spi/gpio: Fix stub for spi_gpio_probe_dt()
  spi/mxs: Make the SPI block clock speed configurable via DT
  spi: spi-sh-hspi: drop frees of devm_ alloc'd data
  spi/pl022: Fix chipselects pointer computation
  spi: spi-tle62x0: Use module_spi_driver macro
  mxs/spi: Rework the mxs_ssp_timeout to be more readable
  mxs/spi: Decrement the DMA/PIO border
  mxs/spi: Increment the transfer length only if transfer succeeded
  mxs/spi: Fix issues when doing long continuous transfer
  spi: spi-gpio: Add DT bindings
  spi: spi-gpio: store chipselect information in private structure
  ...

6 files changed, 135 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/spi/mxs-spi.txt b/Documentation/devicetree/bindings/spi/mxs-spi.txt
new file mode 100644
index 000000000000..e2e13957c2a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/mxs-spi.txt
@@ -0,0 +1,22 @@
+* Freescale MX233/MX28 SSP/SPI
+
+Required properties:
+- compatible: Should be "fsl,<soc>-spi", where soc is "imx23" or "imx28"
+- reg: Offset and length of the register set for the device
+- interrupts: Should contain SSP interrupts (error irq first, dma irq second)
+- fsl,ssp-dma-channel: APBX DMA channel for the SSP
+
+Optional properties:
+- clock-frequency : Input clock frequency to the SPI block in Hz.
+		    Default is 160000000 Hz.
+
+Example:
+
+ssp0: ssp@80010000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx28-spi";
+	reg = <0x80010000 0x2000>;
+	interrupts = <96 82>;
+	fsl,ssp-dma-channel = <0>;
+};
diff --git a/Documentation/devicetree/bindings/spi/spi-bus.txt b/Documentation/devicetree/bindings/spi/spi-bus.txt
index e782add2e457..d2c33d0f533e 100644
--- a/Documentation/devicetree/bindings/spi/spi-bus.txt
+++ b/Documentation/devicetree/bindings/spi/spi-bus.txt
@@ -21,6 +21,9 @@ assumption that board specific platform code will be used to manage
 chip selects.  Individual drivers can define additional properties to
 support describing the chip select layout.
 
+Optional property:
+- num-cs : total number of chipselects
+
 SPI slave nodes must be children of the SPI master node and can
 contain the following properties.
 - reg             - (required) chip select address of device.
diff --git a/Documentation/devicetree/bindings/spi/spi-gpio.txt b/Documentation/devicetree/bindings/spi/spi-gpio.txt
new file mode 100644
index 000000000000..8a824be15754
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-gpio.txt
@@ -0,0 +1,29 @@
+SPI-GPIO devicetree bindings
+
+Required properties:
+
+ - compatible: should be set to "spi-gpio"
+ - #address-cells: should be set to <0x1>
+ - ranges
+ - gpio-sck: GPIO spec for the SCK line to use
+ - gpio-miso: GPIO spec for the MISO line to use
+ - gpio-mosi: GPIO spec for the MOSI line to use
+ - cs-gpios: GPIOs to use for chipselect lines
+ - num-chipselects: number of chipselect lines
+
+Example:
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <0x1>;
+		ranges;
+
+		gpio-sck = <&gpio 95 0>;
+		gpio-miso = <&gpio 98 0>;
+		gpio-mosi = <&gpio 97 0>;
+		cs-gpios = <&gpio 125 0>;
+		num-chipselects = <1>;
+
+		/* clients */
+	};
+
diff --git a/Documentation/devicetree/bindings/spi/spi-sc18is602.txt b/Documentation/devicetree/bindings/spi/spi-sc18is602.txt
new file mode 100644
index 000000000000..02f9033270a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-sc18is602.txt
@@ -0,0 +1,23 @@
+NXP SC18IS602/SCIS603
+
+Required properties:
+	- compatible : Should be one of
+		"nxp,sc18is602"
+		"nxp,sc18is602b"
+		"nxp,sc18is603"
+	- reg: I2C bus address
+
+Optional properties:
+	- clock-frequency : external oscillator clock frequency. If not
+	  specified, the SC18IS602 default frequency (7372000) will be used.
+
+The clock-frequency property is relevant and needed only if the chip has an
+external oscillator (SC18IS603).
+
+Example:
+
+	sc18is603@28 {
+		compatible = "nxp,sc18is603";
+		reg = <0x28>;
+		clock-frequency = <14744000>;
+	}
diff --git a/Documentation/devicetree/bindings/spi/spi_pl022.txt b/Documentation/devicetree/bindings/spi/spi_pl022.txt
index 306ec3ff3c0e..f158fd31cfda 100644
--- a/Documentation/devicetree/bindings/spi/spi_pl022.txt
+++ b/Documentation/devicetree/bindings/spi/spi_pl022.txt
@@ -6,7 +6,29 @@ Required properties:
 - interrupts : Should contain SPI controller interrupt
 
 Optional properties:
+- num-cs : total number of chipselects
 - cs-gpios : should specify GPIOs used for chipselects.
   The gpios will be referred to as reg = <index> in the SPI child nodes.
   If unspecified, a single SPI device without a chip select can be used.
+- pl022,autosuspend-delay : delay in ms following transfer completion before
+			    the runtime power management system suspends the
+			    device. A setting of 0 indicates no delay and the
+                            device will be suspended immediately
+- pl022,rt : indicates the controller should run the message pump with realtime
+             priority to minimise the transfer latency on the bus (boolean)
+
+
+SPI slave nodes must be children of the SPI master node and can
+contain the following properties.
+
+- pl022,interface : interface type:
+	0: SPI
+	1: Texas Instruments Synchronous Serial Frame Format
+	2: Microwire (Half Duplex)
+- pl022,com-mode : polling, interrupt or dma
+- pl022,rx-level-trig : Rx FIFO watermark level
+- pl022,tx-level-trig : Tx FIFO watermark level
+- pl022,ctrl-len : Microwire interface: Control length
+- pl022,wait-state : Microwire interface: Wait state
+- pl022,duplex : Microwire interface: Full/Half duplex
 
diff --git a/Documentation/spi/spi-sc18is602 b/Documentation/spi/spi-sc18is602
new file mode 100644
index 000000000000..a45702865a38
--- /dev/null
+++ b/Documentation/spi/spi-sc18is602
@@ -0,0 +1,36 @@
+Kernel driver spi-sc18is602
+===========================
+
+Supported chips:
+  * NXP SI18IS602/602B/603
+    Datasheet: http://www.nxp.com/documents/data_sheet/SC18IS602_602B_603.pdf
+
+Author:
+        Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+This driver provides connects a NXP SC18IS602/603 I2C-bus to SPI bridge to the
+kernel's SPI core subsystem.
+
+The driver does not probe for supported chips, since the SI18IS602/603 does not
+support Chip ID registers. You will have to instantiate the devices explicitly.
+Please see Documentation/i2c/instantiating-devices for details.
+
+
+Usage Notes
+-----------
+
+This driver requires the I2C adapter driver to support raw I2C messages. I2C
+adapter drivers which can only handle the SMBus protocol are not supported.
+
+The maximum SPI message size supported by SC18IS602/603 is 200 bytes. Attempts
+to initiate longer transfers will fail with -EINVAL. EEPROM read operations and
+similar large accesses have to be split into multiple chunks of no more than
+200 bytes per SPI message (128 bytes of data per message is recommended). This
+means that programs such as "cp" or "od", which automatically use large block
+sizes to access a device, can not be used directly to read data from EEPROM.
+Programs such as dd, where the block size can be specified, should be used
+instead.