summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-02-01 15:56:08 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2016-02-01 15:56:08 -0800
commit34229b277480f46c1e9a19f027f30b074512e68b (patch)
tree90d8b43ebceb850b0e7852d75283aebbd2abbc00 /Documentation
parent2c923414d3963b959f65a8a6031972402e6a34a5 (diff)
parent53729eb174c1589f9185340ffe8c10b3f39f3ef3 (diff)
downloadlinux-34229b277480f46c1e9a19f027f30b074512e68b.tar.gz
linux-34229b277480f46c1e9a19f027f30b074512e68b.tar.bz2
linux-34229b277480f46c1e9a19f027f30b074512e68b.zip
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller: "This looks like a lot but it's a mixture of regression fixes as well as fixes for longer standing issues. 1) Fix on-channel cancellation in mac80211, from Johannes Berg. 2) Handle CHECKSUM_COMPLETE properly in xt_TCPMSS netfilter xtables module, from Eric Dumazet. 3) Avoid infinite loop in UDP SO_REUSEPORT logic, also from Eric Dumazet. 4) Avoid a NULL deref if we try to set SO_REUSEPORT after a socket is bound, from Craig Gallek. 5) GRO key comparisons don't take lightweight tunnels into account, from Jesse Gross. 6) Fix struct pid leak via SCM credentials in AF_UNIX, from Eric Dumazet. 7) We need to set the rtnl_link_ops of ipv6 SIT tunnels before we register them, otherwise the NEWLINK netlink message is missing the proper attributes. From Thadeu Lima de Souza Cascardo. 8) Several Spectrum chip bug fixes for mlxsw switch driver, from Ido Schimmel 9) Handle fragments properly in ipv4 easly socket demux, from Eric Dumazet. 10) Don't ignore the ifindex key specifier on ipv6 output route lookups, from Paolo Abeni" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (128 commits) tcp: avoid cwnd undo after receiving ECN irda: fix a potential use-after-free in ircomm_param_request net: tg3: avoid uninitialized variable warning net: nb8800: avoid uninitialized variable warning net: vxge: avoid unused function warnings net: bgmac: clarify CONFIG_BCMA dependency net: hp100: remove unnecessary #ifdefs net: davinci_cpdma: use dma_addr_t for DMA address ipv6/udp: use sticky pktinfo egress ifindex on connect() ipv6: enforce flowi6_oif usage in ip6_dst_lookup_tail() netlink: not trim skb for mmaped socket when dump vxlan: fix a out of bounds access in __vxlan_find_mac net: dsa: mv88e6xxx: fix port VLAN maps fib_trie: Fix shift by 32 in fib_table_lookup net: moxart: use correct accessors for DMA memory ipv4: ipconfig: avoid unused ic_proto_used symbol bnxt_en: Fix crash in bnxt_free_tx_skbs() during tx timeout. bnxt_en: Exclude rx_drop_pkts hw counter from the stack's rx_dropped counter. bnxt_en: Ring free response from close path should use completion ring net_sched: drr: check for NULL pointer in drr_dequeue ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/net/brcm,bcmgenet.txt4
-rw-r--r--Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt5
-rw-r--r--Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt7
-rw-r--r--Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt7
-rw-r--r--Documentation/devicetree/bindings/net/mdio-mux-gpio.txt8
-rw-r--r--Documentation/devicetree/bindings/net/mdio-mux.txt8
-rw-r--r--Documentation/devicetree/bindings/net/phy.txt6
-rw-r--r--Documentation/networking/ip-sysctl.txt2
8 files changed, 18 insertions, 29 deletions
diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
index 451fef26b4df..10587bdadbbe 100644
--- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
+++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
@@ -68,7 +68,7 @@ ethernet@f0b60000 {
phy1: ethernet-phy@1 {
max-speed = <1000>;
reg = <0x1>;
- compatible = "brcm,28nm-gphy", "ethernet-phy-ieee802.3-c22";
+ compatible = "ethernet-phy-ieee802.3-c22";
};
};
};
@@ -115,7 +115,7 @@ ethernet@f0ba0000 {
phy0: ethernet-phy@0 {
max-speed = <1000>;
reg = <0x0>;
- compatible = "brcm,bcm53125", "ethernet-phy-ieee802.3-c22";
+ compatible = "ethernet-phy-ieee802.3-c22";
};
};
};
diff --git a/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
index 80411b2f0490..ecacfa44b1eb 100644
--- a/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
+++ b/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
@@ -4,8 +4,6 @@ Required properties:
- compatible: should be "hisilicon,hns-dsaf-v1" or "hisilicon,hns-dsaf-v2".
"hisilicon,hns-dsaf-v1" is for hip05.
"hisilicon,hns-dsaf-v2" is for Hi1610 and Hi1612.
-- dsa-name: dsa fabric name who provide this interface.
- should be "dsafX", X is the dsaf id.
- mode: dsa fabric mode string. only support one of dsaf modes like these:
"2port-64vf",
"6port-16rss",
@@ -26,9 +24,8 @@ Required properties:
Example:
-dsa: dsa@c7000000 {
+dsaf0: dsa@c7000000 {
compatible = "hisilicon,hns-dsaf-v1";
- dsa_name = "dsaf0";
mode = "6port-16rss";
interrupt-parent = <&mbigen_dsa>;
reg = <0x0 0xC0000000 0x0 0x420000
diff --git a/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt b/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt
index 41d19be7011e..e6a9d1c30878 100644
--- a/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt
+++ b/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt
@@ -4,8 +4,9 @@ Required properties:
- compatible: "hisilicon,hns-nic-v1" or "hisilicon,hns-nic-v2".
"hisilicon,hns-nic-v1" is for hip05.
"hisilicon,hns-nic-v2" is for Hi1610 and Hi1612.
-- ae-name: accelerator name who provides this interface,
- is simply a name referring to the name of name in the accelerator node.
+- ae-handle: accelerator engine handle for hns,
+ specifies a reference to the associating hardware driver node.
+ see Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
- port-id: is the index of port provided by DSAF (the accelerator). DSAF can
connect to 8 PHYs. Port 0 to 1 are both used for adminstration purpose. They
are called debug ports.
@@ -41,7 +42,7 @@ Example:
ethernet@0{
compatible = "hisilicon,hns-nic-v1";
- ae-name = "dsaf0";
+ ae-handle = <&dsaf0>;
port-id = <0>;
local-mac-address = [a2 14 e4 4b 56 76];
};
diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
index aeea50c84e92..d0cb8693963b 100644
--- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
+++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
@@ -6,12 +6,17 @@ Required properties:
- interrupts: interrupt for the device
- phy: See ethernet.txt file in the same directory.
- phy-mode: See ethernet.txt file in the same directory
-- clocks: a pointer to the reference clock for this device.
+- clocks: List of clocks for this device. At least one clock is
+ mandatory for the core clock. If several clocks are given, then the
+ clock-names property must be used to identify them.
Optional properties:
- tx-csum-limit: maximum mtu supported by port that allow TX checksum.
Value is presented in bytes. If not used, by default 1600B is set for
"marvell,armada-370-neta" and 9800B for others.
+- clock-names: List of names corresponding to clocks property; shall be
+ "core" for core clock and "bus" for the optional bus clock.
+
Example:
diff --git a/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt b/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt
index 79384113c2b0..694987d3c17a 100644
--- a/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt
+++ b/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt
@@ -38,7 +38,6 @@ Example :
phy11: ethernet-phy@1 {
reg = <1>;
- compatible = "marvell,88e1149r";
marvell,reg-init = <3 0x10 0 0x5777>,
<3 0x11 0 0x00aa>,
<3 0x12 0 0x4105>,
@@ -48,7 +47,6 @@ Example :
};
phy12: ethernet-phy@2 {
reg = <2>;
- compatible = "marvell,88e1149r";
marvell,reg-init = <3 0x10 0 0x5777>,
<3 0x11 0 0x00aa>,
<3 0x12 0 0x4105>,
@@ -58,7 +56,6 @@ Example :
};
phy13: ethernet-phy@3 {
reg = <3>;
- compatible = "marvell,88e1149r";
marvell,reg-init = <3 0x10 0 0x5777>,
<3 0x11 0 0x00aa>,
<3 0x12 0 0x4105>,
@@ -68,7 +65,6 @@ Example :
};
phy14: ethernet-phy@4 {
reg = <4>;
- compatible = "marvell,88e1149r";
marvell,reg-init = <3 0x10 0 0x5777>,
<3 0x11 0 0x00aa>,
<3 0x12 0 0x4105>,
@@ -85,7 +81,6 @@ Example :
phy21: ethernet-phy@1 {
reg = <1>;
- compatible = "marvell,88e1149r";
marvell,reg-init = <3 0x10 0 0x5777>,
<3 0x11 0 0x00aa>,
<3 0x12 0 0x4105>,
@@ -95,7 +90,6 @@ Example :
};
phy22: ethernet-phy@2 {
reg = <2>;
- compatible = "marvell,88e1149r";
marvell,reg-init = <3 0x10 0 0x5777>,
<3 0x11 0 0x00aa>,
<3 0x12 0 0x4105>,
@@ -105,7 +99,6 @@ Example :
};
phy23: ethernet-phy@3 {
reg = <3>;
- compatible = "marvell,88e1149r";
marvell,reg-init = <3 0x10 0 0x5777>,
<3 0x11 0 0x00aa>,
<3 0x12 0 0x4105>,
@@ -115,7 +108,6 @@ Example :
};
phy24: ethernet-phy@4 {
reg = <4>;
- compatible = "marvell,88e1149r";
marvell,reg-init = <3 0x10 0 0x5777>,
<3 0x11 0 0x00aa>,
<3 0x12 0 0x4105>,
diff --git a/Documentation/devicetree/bindings/net/mdio-mux.txt b/Documentation/devicetree/bindings/net/mdio-mux.txt
index f65606f8d632..491f5bd55203 100644
--- a/Documentation/devicetree/bindings/net/mdio-mux.txt
+++ b/Documentation/devicetree/bindings/net/mdio-mux.txt
@@ -47,7 +47,6 @@ Example :
phy11: ethernet-phy@1 {
reg = <1>;
- compatible = "marvell,88e1149r";
marvell,reg-init = <3 0x10 0 0x5777>,
<3 0x11 0 0x00aa>,
<3 0x12 0 0x4105>,
@@ -57,7 +56,6 @@ Example :
};
phy12: ethernet-phy@2 {
reg = <2>;
- compatible = "marvell,88e1149r";
marvell,reg-init = <3 0x10 0 0x5777>,
<3 0x11 0 0x00aa>,
<3 0x12 0 0x4105>,
@@ -67,7 +65,6 @@ Example :
};
phy13: ethernet-phy@3 {
reg = <3>;
- compatible = "marvell,88e1149r";
marvell,reg-init = <3 0x10 0 0x5777>,
<3 0x11 0 0x00aa>,
<3 0x12 0 0x4105>,
@@ -77,7 +74,6 @@ Example :
};
phy14: ethernet-phy@4 {
reg = <4>;
- compatible = "marvell,88e1149r";
marvell,reg-init = <3 0x10 0 0x5777>,
<3 0x11 0 0x00aa>,
<3 0x12 0 0x4105>,
@@ -94,7 +90,6 @@ Example :
phy21: ethernet-phy@1 {
reg = <1>;
- compatible = "marvell,88e1149r";
marvell,reg-init = <3 0x10 0 0x5777>,
<3 0x11 0 0x00aa>,
<3 0x12 0 0x4105>,
@@ -104,7 +99,6 @@ Example :
};
phy22: ethernet-phy@2 {
reg = <2>;
- compatible = "marvell,88e1149r";
marvell,reg-init = <3 0x10 0 0x5777>,
<3 0x11 0 0x00aa>,
<3 0x12 0 0x4105>,
@@ -114,7 +108,6 @@ Example :
};
phy23: ethernet-phy@3 {
reg = <3>;
- compatible = "marvell,88e1149r";
marvell,reg-init = <3 0x10 0 0x5777>,
<3 0x11 0 0x00aa>,
<3 0x12 0 0x4105>,
@@ -124,7 +117,6 @@ Example :
};
phy24: ethernet-phy@4 {
reg = <4>;
- compatible = "marvell,88e1149r";
marvell,reg-init = <3 0x10 0 0x5777>,
<3 0x11 0 0x00aa>,
<3 0x12 0 0x4105>,
diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt
index 525e1658f2da..bc1c3c8bf8fa 100644
--- a/Documentation/devicetree/bindings/net/phy.txt
+++ b/Documentation/devicetree/bindings/net/phy.txt
@@ -17,8 +17,7 @@ Optional Properties:
"ethernet-phy-ieee802.3-c22" or "ethernet-phy-ieee802.3-c45" for
PHYs that implement IEEE802.3 clause 22 or IEEE802.3 clause 45
specifications. If neither of these are specified, the default is to
- assume clause 22. The compatible list may also contain other
- elements.
+ assume clause 22.
If the phy's identifier is known then the list may contain an entry
of the form: "ethernet-phy-idAAAA.BBBB" where
@@ -28,6 +27,9 @@ Optional Properties:
4 hex digits. This is the chip vendor OUI bits 19:24,
followed by 10 bits of a vendor specific ID.
+ The compatible list should not contain other values than those
+ listed here.
+
- max-speed: Maximum PHY supported speed (10, 100, 1000...)
- broken-turn-around: If set, indicates the PHY device does not correctly
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index ceb44a095a27..73b36d7c7b0d 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -594,7 +594,7 @@ tcp_fastopen - INTEGER
tcp_syn_retries - INTEGER
Number of times initial SYNs for an active TCP connection attempt
- will be retransmitted. Should not be higher than 255. Default value
+ will be retransmitted. Should not be higher than 127. Default value
is 6, which corresponds to 63seconds till the last retransmission
with the current initial RTO of 1second. With this the final timeout
for an active TCP connection attempt will happen after 127seconds.