Merge tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for the v4.5 merge window:

  Enumeration:
   - Simplify config space size computation (Bjorn Helgaas)
   - Avoid iterating through ROM outside the resource window (Edward O'Callaghan)
   - Support PCIe devices with short cfg_size (Jason S. McMullan)
   - Add Netronome vendor and device IDs (Jason S. McMullan)
   - Limit config space size for Netronome NFP6000 family (Jason S. McMullan)
   - Add Netronome NFP4000 PF device ID (Simon Horman)
   - Limit config space size for Netronome NFP4000 (Simon Horman)
   - Print warnings for all invalid expansion ROM headers (Vladis Dronov)

  Resource management:
   - Fix minimum allocation address overwrite (Christoph Biedl)

  PCI device hotplug:
   - acpiphp_ibm: Fix null dereferences on null ibm_slot (Colin Ian King)
   - pciehp: Always protect pciehp_disable_slot() with hotplug mutex (Guenter Roeck)
   - shpchp: Constify hpc_ops structure (Julia Lawall)
   - ibmphp: Remove unneeded NULL test (Julia Lawall)

  Power management:
   - Make ASPM sysfs link_state_store() consistent with link_state_show() (Andy Lutomirski)

  Virtualization
   - Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183 (Tim Sander)

  MSI:
   - Remove empty pci_msi_init_pci_dev() (Bjorn Helgaas)
   - Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD (Grygorii Strashko)
   - Initialize MSI capability for all architectures (Guilherme G. Piccoli)
   - Relax msi_domain_alloc() to support parentless MSI irqdomains (Liu Jiang)

  ARM Versatile host bridge driver:
   - Remove unused pci_sys_data structures (Lorenzo Pieralisi)

  Broadcom iProc host bridge driver:
   - Hide CONFIG_PCIE_IPROC (Arnd Bergmann)
   - Do not use 0x in front of %pap (Dmitry V. Krivenok)
   - Update iProc PCIe device tree binding (Ray Jui)
   - Add PAXC interface support (Ray Jui)
   - Add iProc PCIe MSI device tree binding (Ray Jui)
   - Add iProc PCIe MSI support (Ray Jui)

  Freescale i.MX6 host bridge driver:
   - Use gpio_set_value_cansleep() (Fabio Estevam)
   - Add support for active-low reset GPIO (Petr Štetiar)

  HiSilicon host bridge driver:
   - Add support for HiSilicon Hip06 PCIe host controllers (Gabriele Paoloni)

  Intel VMD host bridge driver:
   - Export irq_domain_set_info() for module use (Keith Busch)
   - x86/PCI: Allow DMA ops specific to a PCI domain (Keith Busch)
   - Use 32 bit PCI domain numbers (Keith Busch)
   - Add driver for Intel Volume Management Device (VMD) (Keith Busch)

  Qualcomm host bridge driver:
   - Document PCIe devicetree bindings (Stanimir Varbanov)
   - Add Qualcomm PCIe controller driver (Stanimir Varbanov)
   - dts: apq8064: add PCIe devicetree node (Stanimir Varbanov)
   - dts: ifc6410: enable PCIe DT node for this board (Stanimir Varbanov)

  Renesas R-Car host bridge driver:
   - Add support for R-Car H3 to pcie-rcar (Harunobu Kurokawa)
   - Allow DT to override default window settings (Phil Edworthy)
   - Convert to DT resource parsing API (Phil Edworthy)
   - Revert "PCI: rcar: Build pcie-rcar.c only on ARM" (Phil Edworthy)
   - Remove unused pci_sys_data struct from pcie-rcar (Phil Edworthy)
   - Add runtime PM support to pcie-rcar (Phil Edworthy)
   - Add Gen2 PHY setup to pcie-rcar (Phil Edworthy)
   - Add gen2 fallback compatibility string for pci-rcar-gen2 (Simon Horman)
   - Add gen2 fallback compatibility string for pcie-rcar (Simon Horman)

  Synopsys DesignWare host bridge driver:
   - Simplify control flow (Bjorn Helgaas)
   - Make config accessor override checking symmetric (Bjorn Helgaas)
   - Ensure ATU is enabled before IO/conf space accesses (Stanimir Varbanov)

  Miscellaneous:
   - Add of_pci_get_host_bridge_resources() stub (Arnd Bergmann)
   - Check for PCI_HEADER_TYPE_BRIDGE equality, not bitmask (Bjorn Helgaas)
   - Fix all whitespace issues (Bogicevic Sasa)
   - x86/PCI: Simplify pci_bios_{read,write} (Geliang Tang)
   - Use to_pci_dev() instead of open-coding it (Geliang Tang)
   - Use kobj_to_dev() instead of open-coding it (Geliang Tang)
   - Use list_for_each_entry() to simplify code (Geliang Tang)
   - Fix typos in <linux/msi.h> (Thomas Petazzoni)
   - x86/PCI: Clarify AMD Fam10h config access restrictions comment (Tomasz Nowicki)"

* tag 'pci-v4.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (58 commits)
  PCI: Add function 1 DMA alias quirk for Lite-On/Plextor M6e/Marvell 88SS9183
  PCI: Limit config space size for Netronome NFP4000
  PCI: Add Netronome NFP4000 PF device ID
  x86/PCI: Add driver for Intel Volume Management Device (VMD)
  PCI/AER: Use 32 bit PCI domain numbers
  x86/PCI: Allow DMA ops specific to a PCI domain
  irqdomain: Export irq_domain_set_info() for module use
  PCI: host: Add of_pci_get_host_bridge_resources() stub
  genirq/MSI: Relax msi_domain_alloc() to support parentless MSI irqdomains
  PCI: rcar: Add Gen2 PHY setup to pcie-rcar
  PCI: rcar: Add runtime PM support to pcie-rcar
  PCI: designware: Make config accessor override checking symmetric
  PCI: ibmphp: Remove unneeded NULL test
  ARM: dts: ifc6410: enable PCIe DT node for this board
  ARM: dts: apq8064: add PCIe devicetree node
  PCI: hotplug: Use list_for_each_entry() to simplify code
  PCI: rcar: Remove unused pci_sys_data struct from pcie-rcar
  PCI: hisi: Add support for HiSilicon Hip06 PCIe host controllers
  PCI: Avoid iterating through memory outside the resource window
  PCI: acpiphp_ibm: Fix null dereferences on null ibm_slot
  ...

5 files changed, 302 insertions, 10 deletions

diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
index 45c2a8094a9f..01b88f4e0d5b 100644
--- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
@@ -1,7 +1,10 @@
 * Broadcom iProc PCIe controller with the platform bus interface
 
 Required properties:
-- compatible: Must be "brcm,iproc-pcie"
+- compatible: Must be "brcm,iproc-pcie" for PAXB, or "brcm,iproc-pcie-paxc"
+  for PAXC.  PAXB-based root complex is used for external endpoint devices.
+  PAXC-based root complex is connected to emulated endpoint devices
+  internal to the ASIC
 - reg: base address and length of the PCIe controller I/O register space
 - #interrupt-cells: set to <1>
 - interrupt-map-mask and interrupt-map, standard PCI properties to define the
@@ -32,6 +35,28 @@ Optional:
 - brcm,pcie-ob-oarr-size: Some iProc SoCs need the OARR size bit to be set to
 increase the outbound window size
 
+MSI support (optional):
+
+For older platforms without MSI integrated in the GIC, iProc PCIe core provides
+an event queue based MSI support.  The iProc MSI uses host memories to store
+MSI posted writes in the event queues
+
+- msi-parent: Link to the device node of the MSI controller.  On newer iProc
+platforms, the MSI controller may be gicv2m or gicv3-its.  On older iProc
+platforms without MSI support in its interrupt controller, one may use the
+event queue based MSI support integrated within the iProc PCIe core.
+
+When the iProc event queue based MSI is used, one needs to define the
+following properties in the MSI device node:
+- compatible: Must be "brcm,iproc-msi"
+- msi-controller: claims itself as an MSI controller
+- interrupt-parent: Link to its parent interrupt device
+- interrupts: List of interrupt IDs from its parent interrupt device
+
+Optional properties:
+- brcm,pcie-msi-inten: Needs to be present for some older iProc platforms that
+require the interrupt enable registers to be set explicitly to enable MSI
+
 Example:
 	pcie0: pcie@18012000 {
 		compatible = "brcm,iproc-pcie";
@@ -58,6 +83,19 @@ Example:
 		brcm,pcie-ob-oarr-size;
 		brcm,pcie-ob-axi-offset = <0x00000000>;
 		brcm,pcie-ob-window-size = <256>;
+
+		msi-parent = <&msi0>;
+
+		/* iProc event queue based MSI */
+		msi0: msi@18012000 {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
+				     <GIC_SPI 97 IRQ_TYPE_NONE>,
+				     <GIC_SPI 98 IRQ_TYPE_NONE>,
+				     <GIC_SPI 99 IRQ_TYPE_NONE>,
+		};
 	};
 
 	pcie1: pcie@18013000 {
diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
index 17c6ed9c6059..b721beacfe4d 100644
--- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
@@ -1,4 +1,4 @@
-HiSilicon PCIe host bridge DT description
+HiSilicon Hip05 and Hip06 PCIe host bridge DT description
 
 HiSilicon PCIe host controller is based on Designware PCI core.
 It shares common functions with PCIe Designware core driver and inherits
@@ -7,8 +7,8 @@ Documentation/devicetree/bindings/pci/designware-pci.txt.
 
 Additional properties are described here:
 
-Required properties:
-- compatible: Should contain "hisilicon,hip05-pcie".
+Required properties
+- compatible: Should contain "hisilicon,hip05-pcie" or "hisilicon,hip06-pcie".
 - reg: Should contain rc_dbi, config registers location and length.
 - reg-names: Must include the following entries:
   "rc_dbi": controller configuration registers;
@@ -20,7 +20,7 @@ Optional properties:
 - status: Either "ok" or "disabled".
 - dma-coherent: Present if DMA operations are coherent.
 
-Example:
+Hip05 Example (note that Hip06 is the same except compatible):
 	pcie@0xb0080000 {
 		compatible = "hisilicon,hip05-pcie", "snps,dw-pcie";
 		reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>;
diff --git a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
index 7fab84b33531..4e8b90e43dd8 100644
--- a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
+++ b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
@@ -8,7 +8,14 @@ OHCI and EHCI controllers.
 Required properties:
 - compatible: "renesas,pci-r8a7790" for the R8A7790 SoC;
 	      "renesas,pci-r8a7791" for the R8A7791 SoC;
-	      "renesas,pci-r8a7794" for the R8A7794 SoC.
+	      "renesas,pci-r8a7794" for the R8A7794 SoC;
+	      "renesas,pci-rcar-gen2" for a generic R-Car Gen2 compatible device
+
+
+	      When compatible with the generic version, nodes must list the
+	      SoC-specific version corresponding to the platform first
+	      followed by the generic version.
+
 - reg:	A list of physical regions to access the device: the first is
 	the operational registers for the OHCI/EHCI controllers and the
 	second is for the bridge configuration and control registers.
@@ -24,10 +31,15 @@ Required properties:
 - interrupt-map-mask: standard property that helps to define the interrupt
   mapping.
 
+Optional properties:
+- dma-ranges: a single range for the inbound memory region. If not supplied,
+  defaults to 1GiB at 0x40000000. Note there are hardware restrictions on the
+  allowed combinations of address and size.
+
 Example SoC configuration:
 
 	pci0: pci@ee090000  {
-		compatible = "renesas,pci-r8a7790";
+		compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2";
 		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
 		reg = <0x0 0xee090000 0x0 0xc00>,
 		      <0x0 0xee080000 0x0 0x1100>;
@@ -38,6 +50,7 @@ Example SoC configuration:
 		#address-cells = <3>;
 		#size-cells = <2>;
 		#interrupt-cells = <1>;
+		dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
 		interrupt-map-mask = <0xff00 0 0 0x7>;
 		interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
 				 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
new file mode 100644
index 000000000000..4059a6f89bc1
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
@@ -0,0 +1,233 @@
+* Qualcomm PCI express root complex
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: Value should contain
+			- "qcom,pcie-ipq8064" for ipq8064
+			- "qcom,pcie-apq8064" for apq8064
+			- "qcom,pcie-apq8084" for apq8084
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: Register ranges as listed in the reg-names property
+
+- reg-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: Must include the following entries
+			- "parf"   Qualcomm specific registers
+			- "dbi"	   Designware PCIe registers
+			- "elbi"   External local bus interface registers
+			- "config" PCIe configuration space
+
+- device_type:
+	Usage: required
+	Value type: <string>
+	Definition: Should be "pci". As specified in designware-pcie.txt
+
+- #address-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: Should be 3. As specified in designware-pcie.txt
+
+- #size-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: Should be 2. As specified in designware-pcie.txt
+
+- ranges:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: As specified in designware-pcie.txt
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: MSI interrupt
+
+- interrupt-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: Should contain "msi"
+
+- #interrupt-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: Should be 1. As specified in designware-pcie.txt
+
+- interrupt-map-mask:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: As specified in designware-pcie.txt
+
+- interrupt-map:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: As specified in designware-pcie.txt
+
+- clocks:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: List of phandle and clock specifier pairs as listed
+		    in clock-names property
+
+- clock-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: Should contain the following entries
+			- "iface"	Configuration AHB clock
+
+- clock-names:
+	Usage: required for ipq/apq8064
+	Value type: <stringlist>
+	Definition: Should contain the following entries
+			- "core"	Clocks the pcie hw block
+			- "phy"		Clocks the pcie PHY block
+- clock-names:
+	Usage: required for apq8084
+	Value type: <stringlist>
+	Definition: Should contain the following entries
+			- "aux"		Auxiliary (AUX) clock
+			- "bus_master"	Master AXI clock
+			- "bus_slave"	Slave AXI clock
+- resets:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: List of phandle and reset specifier pairs as listed
+		    in reset-names property
+
+- reset-names:
+	Usage: required for ipq/apq8064
+	Value type: <stringlist>
+	Definition: Should contain the following entries
+			- "axi"  AXI reset
+			- "ahb"  AHB reset
+			- "por"  POR reset
+			- "pci"  PCI reset
+			- "phy"  PHY reset
+
+- reset-names:
+	Usage: required for apq8084
+	Value type: <stringlist>
+	Definition: Should contain the following entries
+			- "core" Core reset
+
+- power-domains:
+	Usage: required for apq8084
+	Value type: <prop-encoded-array>
+	Definition: A phandle and power domain specifier pair to the
+		    power domain which is responsible for collapsing
+		    and restoring power to the peripheral
+
+- vdda-supply:
+	Usage: required
+	Value type: <phandle>
+	Definition: A phandle to the core analog power supply
+
+- vdda_phy-supply:
+	Usage: required for ipq/apq8064
+	Value type: <phandle>
+	Definition: A phandle to the analog power supply for PHY
+
+- vdda_refclk-supply:
+	Usage: required for ipq/apq8064
+	Value type: <phandle>
+	Definition: A phandle to the analog power supply for IC which generates
+		    reference clock
+
+- phys:
+	Usage: required for apq8084
+	Value type: <phandle>
+	Definition: List of phandle(s) as listed in phy-names property
+
+- phy-names:
+	Usage: required for apq8084
+	Value type: <stringlist>
+	Definition: Should contain "pciephy"
+
+- <name>-gpios:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: List of phandle and gpio specifier pairs. Should contain
+			- "perst-gpios"	PCIe endpoint reset signal line
+			- "wake-gpios"	PCIe endpoint wake signal line
+
+* Example for ipq/apq8064
+	pcie@1b500000 {
+		compatible = "qcom,pcie-apq8064", "qcom,pcie-ipq8064", "snps,dw-pcie";
+		reg = <0x1b500000 0x1000
+		       0x1b502000 0x80
+		       0x1b600000 0x100
+		       0x0ff00000 0x100000>;
+		reg-names = "dbi", "elbi", "parf", "config";
+		device_type = "pci";
+		linux,pci-domain = <0>;
+		bus-range = <0x00 0xff>;
+		num-lanes = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000   /* I/O */
+			  0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */
+		interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
+		interrupt-names = "msi";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0x7>;
+		interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+				<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+				<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+				<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+		clocks = <&gcc PCIE_A_CLK>,
+			 <&gcc PCIE_H_CLK>,
+			 <&gcc PCIE_PHY_CLK>;
+		clock-names = "core", "iface", "phy";
+		resets = <&gcc PCIE_ACLK_RESET>,
+			 <&gcc PCIE_HCLK_RESET>,
+			 <&gcc PCIE_POR_RESET>,
+			 <&gcc PCIE_PCI_RESET>,
+			 <&gcc PCIE_PHY_RESET>;
+		reset-names = "axi", "ahb", "por", "pci", "phy";
+		pinctrl-0 = <&pcie_pins_default>;
+		pinctrl-names = "default";
+	};
+
+* Example for apq8084
+	pcie0@fc520000 {
+		compatible = "qcom,pcie-apq8084", "snps,dw-pcie";
+		reg = <0xfc520000 0x2000>,
+		      <0xff000000 0x1000>,
+		      <0xff001000 0x1000>,
+		      <0xff002000 0x2000>;
+		reg-names = "parf", "dbi", "elbi", "config";
+		device_type = "pci";
+		linux,pci-domain = <0>;
+		bus-range = <0x00 0xff>;
+		num-lanes = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges = <0x81000000 0 0          0xff200000 0 0x00100000   /* I/O */
+			  0x82000000 0 0x00300000 0xff300000 0 0x00d00000>; /* memory */
+		interrupts = <GIC_SPI 243 IRQ_TYPE_NONE>;
+		interrupt-names = "msi";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0x7>;
+		interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+				<0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+				<0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+				<0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+		clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+			 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+			 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+			 <&gcc GCC_PCIE_0_AUX_CLK>;
+		clock-names = "iface", "master_bus", "slave_bus", "aux";
+		resets = <&gcc GCC_PCIE_0_BCR>;
+		reset-names = "core";
+		power-domains = <&gcc PCIE0_GDSC>;
+		vdda-supply = <&pma8084_l3>;
+		phys = <&pciephy0>;
+		phy-names = "pciephy";
+		perst-gpio = <&tlmm 70 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&pcie0_pins_default>;
+		pinctrl-names = "default";
+	};
diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt
index 29d3b989d3b0..558fe528ae19 100644
--- a/Documentation/devicetree/bindings/pci/rcar-pci.txt
+++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt
@@ -1,8 +1,16 @@
 * Renesas RCar PCIe interface
 
 Required properties:
-- compatible: should contain one of the following
-	"renesas,pcie-r8a7779", "renesas,pcie-r8a7790", "renesas,pcie-r8a7791"
+compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC;
+	    "renesas,pcie-r8a7790" for the R8A7790 SoC;
+	    "renesas,pcie-r8a7791" for the R8A7791 SoC;
+	    "renesas,pcie-r8a7795" for the R8A7795 SoC;
+	    "renesas,pcie-rcar-gen2" for a generic R-Car Gen2 compatible device.
+
+	    When compatible with the generic version, nodes must list the
+	    SoC-specific version corresponding to the platform first
+	    followed by the generic version.
+
 - reg: base address and length of the pcie controller registers.
 - #address-cells: set to <3>
 - #size-cells: set to <2>
@@ -25,7 +33,7 @@ Example:
 SoC specific DT Entry:
 
 	pcie: pcie@fe000000 {
-		compatible = "renesas,pcie-r8a7791";
+		compatible = "renesas,pcie-r8a7791", "renesas,pcie-rcar-gen2";
 		reg = <0 0xfe000000 0 0x80000>;
 		#address-cells = <3>;
 		#size-cells = <2>;