diff options
| author | Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> | 2017-06-21 21:21:29 +0200 |
|---|---|---|
| committer | Jonathan Cameron <jic23@kernel.org> | 2017-07-01 10:17:00 +0100 |
| commit | e69076639d876d79d62ed2ad5fb642171398b020 (patch) | |
| tree | a1bcc082e0fadbc423626a4a57fcbbb7f8433a8c /Documentation | |
| parent | ff5fff4af47970cdeb92cb8194c8933db4ae248b (diff) | |
| download | linux-e69076639d876d79d62ed2ad5fb642171398b020.tar.gz linux-e69076639d876d79d62ed2ad5fb642171398b020.tar.bz2 linux-e69076639d876d79d62ed2ad5fb642171398b020.zip | |
dt-bindings: iio: imu: st_lsm6dsx: support open drain mode
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 8 |
1 files changed, 8 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt index 6f28ff55f3ec..1ff1af799c76 100644 --- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt +++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt @@ -11,6 +11,14 @@ Required properties: Optional properties: - st,drdy-int-pin: the pin on the package that will be used to signal "data ready" (valid values: 1 or 2). +- drive-open-drain: the interrupt/data ready line will be configured + as open drain, which is useful if several sensors share the same + interrupt line. This is a boolean property. + (This binding is taken from pinctrl/pinctrl-bindings.txt) + If the requested interrupt is configured as IRQ_TYPE_LEVEL_HIGH or + IRQ_TYPE_EDGE_RISING a pull-down resistor is needed to drive the line + when it is not active, whereas a pull-up one is needed when interrupt + line is configured as IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_EDGE_FALLING. - interrupt-parent: should be the phandle for the interrupt controller - interrupts: interrupt mapping for IRQ. It should be configured with flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or |