Merge tag 'phy-for-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next

Kishon writes:

phy: for 4.2 merge window

*) new Broadcom SATA3 PHY driver for Broadcom STB SoCs
*) new phy API to get PHY by index which is used in EHCI and
   OHCI controller drivers
*) support specifying supply at port level used for multi-port PHYs
*) sparse warning fixes in miphy PHYs
*) fix pm_runtime issues in twl4030 driver

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

4 files changed, 55 insertions, 1 deletions

diff --git a/Documentation/ABI/testing/sysfs-platform-twl4030-usb b/Documentation/ABI/testing/sysfs-platform-twl4030-usb
new file mode 100644
index 000000000000..512c51be64ae
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-twl4030-usb
@@ -0,0 +1,8 @@
+What: /sys/bus/platform/devices/*twl4030-usb/vbus
+Description:
+	Read-only status reporting if VBUS (approx 5V)
+	is being supplied by the USB bus.
+
+	Possible values: "on", "off".
+
+	Changes are notified via select/poll.
diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt b/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt
new file mode 100644
index 000000000000..7f81ef90146a
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt
@@ -0,0 +1,40 @@
+* Broadcom SATA3 PHY for STB
+
+Required properties:
+- compatible: should be one or more of
+     "brcm,bcm7445-sata-phy"
+     "brcm,phy-sata3"
+- address-cells: should be 1
+- size-cells: should be 0
+- reg: register range for the PHY PCB interface
+- reg-names: should be "phy"
+
+Sub-nodes:
+  Each port's PHY should be represented as a sub-node.
+
+Sub-nodes required properties:
+- reg: the PHY number
+- phy-cells: generic PHY binding; must be 0
+Optional:
+- brcm,enable-ssc: use spread spectrum clocking (SSC) on this port
+
+
+Example:
+
+	sata-phy@f0458100 {
+		compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3";
+		reg = <0xf0458100 0x1e00>, <0xf045804c 0x10>;
+		reg-names = "phy";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sata-phy@0 {
+			reg = <0>;
+			#phy-cells = <0>;
+		};
+
+		sata-phy@1 {
+			reg = <1>;
+			#phy-cells = <0>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
index 00fc52a034b7..d564ba4f1cf6 100644
--- a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
+++ b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
@@ -6,6 +6,7 @@ This file provides information on what the device node for the R-Car generation
 Required properties:
 - compatible: "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC.
 	      "renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC.
+	      "renesas,usb-phy-r8a7794" if the device is a part of R8A7794 SoC.
 - reg: offset and length of the register block.
 - #address-cells: number of address cells for the USB channel subnodes, must
 		  be <1>.
diff --git a/Documentation/phy.txt b/Documentation/phy.txt
index 371361c69a4b..b388c5af9e72 100644
--- a/Documentation/phy.txt
+++ b/Documentation/phy.txt
@@ -76,6 +76,8 @@ struct phy *phy_get(struct device *dev, const char *string);
 struct phy *phy_optional_get(struct device *dev, const char *string);
 struct phy *devm_phy_get(struct device *dev, const char *string);
 struct phy *devm_phy_optional_get(struct device *dev, const char *string);
+struct phy *devm_of_phy_get_by_index(struct device *dev, struct device_node *np,
+				     int index);
 
 phy_get, phy_optional_get, devm_phy_get and devm_phy_optional_get can
 be used to get the PHY. In the case of dt boot, the string arguments
@@ -86,7 +88,10 @@ successful PHY get. On driver detach, release function is invoked on
 the the devres data and devres data is freed. phy_optional_get and
 devm_phy_optional_get should be used when the phy is optional. These
 two functions will never return -ENODEV, but instead returns NULL when
-the phy cannot be found.
+the phy cannot be found.Some generic drivers, such as ehci, may use multiple
+phys and for such drivers referencing phy(s) by name(s) does not make sense. In
+this case, devm_of_phy_get_by_index can be used to get a phy reference based on
+the index.
 
 It should be noted that NULL is a valid phy reference. All phy
 consumer calls on the NULL phy become NOPs. That is the release calls,