Merge tag 'at91-5.6-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt

AT91 DT for 5.6 #2

 - Add sam9x60 dtsi
 - New board sam9x60 Evaluation Kit

* tag 'at91-5.6-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: at91: sam9x60: add device tree for soc and board
  dt-bindings: arm: add sam9x60-ek board
  dt-bindings: atmel-gpbr: add microchip,sam9x60-gpbr
  dt-bindings: atmel-smc: add microchip,sam9x60-smc
  dt-bindings: atmel-sysreg: add microchip,sam9x60-ddramc
  dt-bindings: atmel-nand: add microchip,sam9x60-pmecc
  dt-bindings: atmel-matrix: add microchip,sam9x60-matrix
  dt-bindings: at91-sama5d2_adc: add microchip,sam9x60-adc
  dt-bindings: atmel-isi: add microchip,sam9x60-isi
  dt-bindings: atmel-can: add microchip,sam9x60-can
  dt-bindings: at_xdmac: add microchip,sam9x60-dma
  dt-bindings: at_xdmac: remove wildcard

Link: https://lore.kernel.org/r/20200119234707.GA90094@piout.net
Signed-off-by: Olof Johansson <olof@lixom.net>

10 files changed, 18 insertions, 7 deletions

diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.yaml b/Documentation/devicetree/bindings/arm/atmel-at91.yaml
index 3584f0ec263f..0357314076bc 100644
--- a/Documentation/devicetree/bindings/arm/atmel-at91.yaml
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.yaml
@@ -82,6 +82,12 @@ properties:
           - const: atmel,sama5d2
           - const: atmel,sama5
 
+      - description: SAM9X60-EK board
+        items:
+          - const: microchip,sam9x60ek
+          - const: microchip,sam9x60
+          - const: atmel,at91sam9
+
       - description: Nattis v2 board with Natte v2 power board
         items:
           - const: axentia,nattis-2
diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
index 9fbde401a090..b4900d3b4a7c 100644
--- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@@ -39,6 +39,7 @@ RAMC SDRAM/DDR Controller required properties:
 			"atmel,at91sam9260-sdramc",
 			"atmel,at91sam9g45-ddramc",
 			"atmel,sama5d3-ddramc",
+			"microchip,sam9x60-ddramc"
 - reg: Should contain registers location and length
 
 Examples:
diff --git a/Documentation/devicetree/bindings/dma/atmel-xdma.txt b/Documentation/devicetree/bindings/dma/atmel-xdma.txt
index 0eb2b3207e08..4dc398e1a371 100644
--- a/Documentation/devicetree/bindings/dma/atmel-xdma.txt
+++ b/Documentation/devicetree/bindings/dma/atmel-xdma.txt
@@ -2,9 +2,7 @@
 
 * XDMA Controller
 Required properties:
-- compatible: Should be "atmel,<chip>-dma".
-  <chip> compatible description:
-  - sama5d4: first SoC adding the XDMAC
+- compatible: Should be "atmel,sama5d4-dma" or "microchip,sam9x60-dma".
 - reg: Should contain DMA registers location and length.
 - interrupts: Should contain DMA interrupt.
 - #dma-cells: Must be <1>, used to represent the number of integer cells in
diff --git a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
index 4a3c1d496e1a..07c59f301b31 100644
--- a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
@@ -1,7 +1,7 @@
 * AT91 SAMA5D2 Analog to Digital Converter (ADC)
 
 Required properties:
-  - compatible: Should be "atmel,sama5d2-adc".
+  - compatible: Should be "atmel,sama5d2-adc" or "microchip,sam9x60-adc".
   - reg: Should contain ADC registers location and length.
   - interrupts: Should contain the IRQ line for the ADC.
   - clocks: phandle to device clock.
diff --git a/Documentation/devicetree/bindings/media/atmel-isi.txt b/Documentation/devicetree/bindings/media/atmel-isi.txt
index 332513a151cc..8924c7545b63 100644
--- a/Documentation/devicetree/bindings/media/atmel-isi.txt
+++ b/Documentation/devicetree/bindings/media/atmel-isi.txt
@@ -2,7 +2,7 @@ Atmel Image Sensor Interface (ISI)
 ----------------------------------
 
 Required properties for ISI:
-- compatible: must be "atmel,at91sam9g45-isi".
+- compatible: must be "atmel,at91sam9g45-isi" or "microchip,sam9x60-isi".
 - reg: physical base address and length of the registers set for the device.
 - interrupts: should contain IRQ line for the ISI.
 - clocks: list of clock specifiers, corresponding to entries in the clock-names
diff --git a/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt b/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt
index a28569540683..e8c525569f10 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt
@@ -3,7 +3,9 @@
 The GPBR are a set of battery-backed registers.
 
 Required properties:
-- compatible:		"atmel,at91sam9260-gpbr", "syscon"
+- compatible:		Should be one of the following:
+			"atmel,at91sam9260-gpbr", "syscon"
+			"microchip,sam9x60-gpbr", "syscon"
 - reg:			contains offset/length value of the GPBR memory
 			region.
 
diff --git a/Documentation/devicetree/bindings/mfd/atmel-matrix.txt b/Documentation/devicetree/bindings/mfd/atmel-matrix.txt
index e3ef50ca02a5..89d05c64fb01 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-matrix.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-matrix.txt
@@ -13,6 +13,7 @@ Required properties:
 			"atmel,at91sam9n12-matrix", "syscon"
 			"atmel,at91sam9x5-matrix", "syscon"
 			"atmel,sama5d3-matrix", "syscon"
+			"microchip,sam9x60-matrix", "syscon"
 - reg:			Contains offset/length value of the Bus Matrix
 			memory region.
 
diff --git a/Documentation/devicetree/bindings/mfd/atmel-smc.txt b/Documentation/devicetree/bindings/mfd/atmel-smc.txt
index 1103ce2030fb..5696d9fcb5dc 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-smc.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-smc.txt
@@ -9,6 +9,7 @@ Required properties:
 			"atmel,at91sam9260-smc", "syscon"
 			"atmel,sama5d3-smc", "syscon"
 			"atmel,sama5d2-smc", "syscon"
+			"microchip,sam9x60-smc", "syscon"
 - reg:			Contains offset/length value of the SMC memory
 			region.
 
diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
index 68b51dc58816..3aa297c97ab6 100644
--- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
@@ -57,6 +57,7 @@ Required properties:
 	"atmel,at91sam9g45-pmecc"
 	"atmel,sama5d4-pmecc"
 	"atmel,sama5d2-pmecc"
+	"microchip,sam9x60-pmecc"
 - reg: should contain 2 register ranges. The first one is pointing to the PMECC
        block, and the second one to the PMECC_ERRLOC block.
 
diff --git a/Documentation/devicetree/bindings/net/can/atmel-can.txt b/Documentation/devicetree/bindings/net/can/atmel-can.txt
index 14e52a0d86ec..218a3b3eb27e 100644
--- a/Documentation/devicetree/bindings/net/can/atmel-can.txt
+++ b/Documentation/devicetree/bindings/net/can/atmel-can.txt
@@ -1,7 +1,8 @@
 * AT91 CAN *
 
 Required properties:
-  - compatible: Should be "atmel,at91sam9263-can" or "atmel,at91sam9x5-can"
+  - compatible: Should be "atmel,at91sam9263-can", "atmel,at91sam9x5-can" or
+    "microchip,sam9x60-can"
   - reg: Should contain CAN controller registers location and length
   - interrupts: Should contain IRQ line for the CAN controller