Merge branch 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm

Pull ARM cpufreq driver changes for 5.4 from Viresh Kumar:

"This contains:

- Minor fixes for mediatek driver (Andrew-sh.Cheng and Fabien Parent).
- Minor updates for imx driver (Anson Huang).
- Minor fix for ti-cpufreq driver (Gustavo A. R. Silva).
- Minor fix for ap806 driver (Hariprasad Kelam).
- Significant updates to qcom cpufreq drivers, mostly to support CPR
  stuff (Jorge Ramirez-Ortiz, Niklas Cassel, Sibi Sankar, Douglas
  RAILLARD and Sricharan R).
- New sun50i cpufreq driver (Yangtao Li).

It also contains a few OPP changes which were required because of
dependencies for the qcom cpufreq changes."

* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (22 commits)
  cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist
  cpufreq: qcom: Add support for qcs404 on nvmem driver
  cpufreq: qcom: Refactor the driver to make it easier to extend
  cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
  dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR
  dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain
  cpufreq: mediatek: Add support for mt8183
  cpufreq: mediatek: change to regulator_get_optional
  cpufreq: imx-cpufreq-dt: Add i.MX8MN support
  cpufreq: Use imx-cpufreq-dt for i.MX8MN's speed grading
  cpufreq: qcom-hw: invoke frequency-invariance setter function
  cpufreq: qcom-hw: Update logic to detect turbo frequency
  cpufreq: mediatek-cpufreq: Add compatible for MT8516
  cpufreq: ti-cpufreq: Mark expected switch fall-through
  dt-bindings: opp: qcom-nvmem: Make speedbin related properties optional
  dt-bindings: opp: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
  opp: Add dev_pm_opp_find_level_exact()
  opp: Return genpd virtual devices from dev_pm_opp_attach_genpd()
  opp: Not all power-domains are scalable
  cpufreq: ap806: Add NULL check after kcalloc
  ...

3 files changed, 307 insertions, 6 deletions

diff --git a/Documentation/devicetree/bindings/opp/kryo-cpufreq.txt b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
index c2127b96805a..4751029b9b74 100644
--- a/Documentation/devicetree/bindings/opp/kryo-cpufreq.txt
+++ b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
@@ -1,25 +1,38 @@
-Qualcomm Technologies, Inc. KRYO CPUFreq and OPP bindings
+Qualcomm Technologies, Inc. NVMEM CPUFreq and OPP bindings
 ===================================
 
-In Certain Qualcomm Technologies, Inc. SoCs like apq8096 and msm8996
-that have KRYO processors, the CPU ferequencies subset and voltage value
-of each OPP varies based on the silicon variant in use.
+In Certain Qualcomm Technologies, Inc. SoCs like apq8096 and msm8996,
+the CPU frequencies subset and voltage value of each OPP varies based on
+the silicon variant in use.
 Qualcomm Technologies, Inc. Process Voltage Scaling Tables
 defines the voltage and frequency value based on the msm-id in SMEM
 and speedbin blown in the efuse combination.
-The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
+The qcom-cpufreq-nvmem driver reads the msm-id and efuse value from the SoC
 to provide the OPP framework with required information (existing HW bitmap).
 This is used to determine the voltage and frequency value for each OPP of
 operating-points-v2 table when it is parsed by the OPP framework.
 
 Required properties:
 --------------------
-In 'cpus' nodes:
+In 'cpu' nodes:
 - operating-points-v2: Phandle to the operating-points-v2 table to use.
 
 In 'operating-points-v2' table:
 - compatible: Should be
 	- 'operating-points-v2-kryo-cpu' for apq8096 and msm8996.
+
+Optional properties:
+--------------------
+In 'cpu' nodes:
+- power-domains: A phandle pointing to the PM domain specifier which provides
+		the performance states available for active state management.
+		Please refer to the power-domains bindings
+		Documentation/devicetree/bindings/power/power_domain.txt
+		and also examples below.
+- power-domain-names: Should be
+	- 'cpr' for qcs404.
+
+In 'operating-points-v2' table:
 - nvmem-cells: A phandle pointing to a nvmem-cells node representing the
 		efuse registers that has information about the
 		speedbin that is used to select the right frequency/voltage
@@ -678,3 +691,105 @@ soc {
 		};
 	};
 };
+
+Example 2:
+---------
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			....
+			clocks = <&apcs_glb>;
+			operating-points-v2 = <&cpu_opp_table>;
+			power-domains = <&cpr>;
+			power-domain-names = "cpr";
+		};
+
+		CPU1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			....
+			clocks = <&apcs_glb>;
+			operating-points-v2 = <&cpu_opp_table>;
+			power-domains = <&cpr>;
+			power-domain-names = "cpr";
+		};
+
+		CPU2: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			....
+			clocks = <&apcs_glb>;
+			operating-points-v2 = <&cpu_opp_table>;
+			power-domains = <&cpr>;
+			power-domain-names = "cpr";
+		};
+
+		CPU3: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			....
+			clocks = <&apcs_glb>;
+			operating-points-v2 = <&cpu_opp_table>;
+			power-domains = <&cpr>;
+			power-domain-names = "cpr";
+		};
+	};
+
+	cpu_opp_table: cpu-opp-table {
+		compatible = "operating-points-v2-kryo-cpu";
+		opp-shared;
+
+		opp-1094400000 {
+			opp-hz = /bits/ 64 <1094400000>;
+			required-opps = <&cpr_opp1>;
+		};
+		opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			required-opps = <&cpr_opp2>;
+		};
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			required-opps = <&cpr_opp3>;
+		};
+	};
+
+	cpr_opp_table: cpr-opp-table {
+		compatible = "operating-points-v2-qcom-level";
+
+		cpr_opp1: opp1 {
+			opp-level = <1>;
+			qcom,opp-fuse-level = <1>;
+		};
+		cpr_opp2: opp2 {
+			opp-level = <2>;
+			qcom,opp-fuse-level = <2>;
+		};
+		cpr_opp3: opp3 {
+			opp-level = <3>;
+			qcom,opp-fuse-level = <3>;
+		};
+	};
+
+....
+
+soc {
+....
+	cpr: power-controller@b018000 {
+		compatible = "qcom,qcs404-cpr", "qcom,cpr";
+		reg = <0x0b018000 0x1000>;
+		....
+		vdd-apc-supply = <&pms405_s3>;
+		#power-domain-cells = <0>;
+		operating-points-v2 = <&cpr_opp_table>;
+		....
+	};
+};
diff --git a/Documentation/devicetree/bindings/opp/qcom-opp.txt b/Documentation/devicetree/bindings/opp/qcom-opp.txt
new file mode 100644
index 000000000000..32eb0793c7e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/qcom-opp.txt
@@ -0,0 +1,19 @@
+Qualcomm OPP bindings to describe OPP nodes
+
+The bindings are based on top of the operating-points-v2 bindings
+described in Documentation/devicetree/bindings/opp/opp.txt
+Additional properties are described below.
+
+* OPP Table Node
+
+Required properties:
+- compatible: Allow OPPs to express their compatibility. It should be:
+  "operating-points-v2-qcom-level"
+
+* OPP Node
+
+Required properties:
+- qcom,opp-fuse-level: A positive value representing the fuse corner/level
+  associated with this OPP node. Sometimes several corners/levels shares
+  a certain fuse corner/level. A fuse corner/level contains e.g. ref uV,
+  min uV, and max uV.
diff --git a/Documentation/devicetree/bindings/opp/sun50i-nvmem-cpufreq.txt b/Documentation/devicetree/bindings/opp/sun50i-nvmem-cpufreq.txt
new file mode 100644
index 000000000000..7deae57a587b
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/sun50i-nvmem-cpufreq.txt
@@ -0,0 +1,167 @@
+Allwinner Technologies, Inc. NVMEM CPUFreq and OPP bindings
+===================================
+
+For some SoCs, the CPU frequency subset and voltage value of each OPP
+varies based on the silicon variant in use. Allwinner Process Voltage
+Scaling Tables defines the voltage and frequency value based on the
+speedbin blown in the efuse combination. The sun50i-cpufreq-nvmem driver
+reads the efuse value from the SoC to provide the OPP framework with
+required information.
+
+Required properties:
+--------------------
+In 'cpus' nodes:
+- operating-points-v2: Phandle to the operating-points-v2 table to use.
+
+In 'operating-points-v2' table:
+- compatible: Should be
+	- 'allwinner,sun50i-h6-operating-points'.
+- nvmem-cells: A phandle pointing to a nvmem-cells node representing the
+		efuse registers that has information about the speedbin
+		that is used to select the right frequency/voltage value
+		pair. Please refer the for nvmem-cells bindings
+		Documentation/devicetree/bindings/nvmem/nvmem.txt and
+		also examples below.
+
+In every OPP node:
+- opp-microvolt-<name>: Voltage in micro Volts.
+			At runtime, the platform can pick a <name> and
+			matching opp-microvolt-<name> property.
+			[See: opp.txt]
+			HW:		<name>:
+			sun50i-h6	speed0 speed1 speed2
+
+Example 1:
+---------
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <1>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <2>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <3>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+		};
+        };
+
+        cpu_opp_table: opp_table {
+                compatible = "allwinner,sun50i-h6-operating-points";
+                nvmem-cells = <&speedbin_efuse>;
+                opp-shared;
+
+                opp@480000000 {
+                        clock-latency-ns = <244144>; /* 8 32k periods */
+                        opp-hz = /bits/ 64 <480000000>;
+
+                        opp-microvolt-speed0 = <880000>;
+                        opp-microvolt-speed1 = <820000>;
+                        opp-microvolt-speed2 = <800000>;
+                };
+
+                opp@720000000 {
+                        clock-latency-ns = <244144>; /* 8 32k periods */
+                        opp-hz = /bits/ 64 <720000000>;
+
+                        opp-microvolt-speed0 = <880000>;
+                        opp-microvolt-speed1 = <820000>;
+                        opp-microvolt-speed2 = <800000>;
+                };
+
+                opp@816000000 {
+                        clock-latency-ns = <244144>; /* 8 32k periods */
+                        opp-hz = /bits/ 64 <816000000>;
+
+                        opp-microvolt-speed0 = <880000>;
+                        opp-microvolt-speed1 = <820000>;
+                        opp-microvolt-speed2 = <800000>;
+                };
+
+                opp@888000000 {
+                        clock-latency-ns = <244144>; /* 8 32k periods */
+                        opp-hz = /bits/ 64 <888000000>;
+
+                        opp-microvolt-speed0 = <940000>;
+                        opp-microvolt-speed1 = <820000>;
+                        opp-microvolt-speed2 = <800000>;
+                };
+
+                opp@1080000000 {
+                        clock-latency-ns = <244144>; /* 8 32k periods */
+                        opp-hz = /bits/ 64 <1080000000>;
+
+                        opp-microvolt-speed0 = <1060000>;
+                        opp-microvolt-speed1 = <880000>;
+                        opp-microvolt-speed2 = <840000>;
+                };
+
+                opp@1320000000 {
+                        clock-latency-ns = <244144>; /* 8 32k periods */
+                        opp-hz = /bits/ 64 <1320000000>;
+
+                        opp-microvolt-speed0 = <1160000>;
+                        opp-microvolt-speed1 = <940000>;
+                        opp-microvolt-speed2 = <900000>;
+                };
+
+                opp@1488000000 {
+                        clock-latency-ns = <244144>; /* 8 32k periods */
+                        opp-hz = /bits/ 64 <1488000000>;
+
+                        opp-microvolt-speed0 = <1160000>;
+                        opp-microvolt-speed1 = <1000000>;
+                        opp-microvolt-speed2 = <960000>;
+                };
+        };
+....
+soc {
+....
+	sid: sid@3006000 {
+		compatible = "allwinner,sun50i-h6-sid";
+		reg = <0x03006000 0x400>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		....
+		speedbin_efuse: speed@1c {
+			reg = <0x1c 4>;
+		};
+        };
+};