Merge branch 'randconfig-fixes' into next/fixes-non-critical

This is the first batch of a much longer series of bug fixes
found during randconfig testing. This part are all the simple
patches that are applicable for the arm-soc tree, while most
other fixes will likely go through other maintainers.

* randconfig-fixes: (50 commits)
  ARM: tegra: make debug_ll code build for ARMv6
  ARM: sunxi: fix build for THUMB2_KERNEL
  ARM: exynos: add missing include of linux/module.h
  ARM: exynos: fix l2x0 saved regs handling
  ARM: samsung: select CRC32 for SAMSUNG_PM_CHECK
  ARM: samsung: select ATAGS where necessary
  ARM: samsung: fix SAMSUNG_PM_DEBUG Kconfig logic
  ARM: samsung: allow serial driver to be disabled
  ARM: s5pv210: enable IDE support in MACH_TORBRECK
  ARM: s5p64x0: fix building with only one soc type
  ARM: s3c64xx: select power domains only when used
  ARM: s3c64xx: MACH_SMDK6400 needs HSMMC1
  ARM: s3c24xx: osiris dvs needs tps65010
  ARM: s3c24xx: fix gta02 build error
  ARM: s3c24xx: MINI2440 needs I2C for EEPROM_AT24
  ARM: integrator: only select pl01x if TTY is enabled
  ARM: realview: fix sparsemem build
  ARM: footbridge: make screen_info setup conditional
  ARM: footbridge: fix build with PCI disabled
  ARM: footbridge: don't build floppy code for addin mode
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

2 files changed, 9 insertions, 10 deletions

diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index 22a3b9b5d4a1..4157aec4e307 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -74,6 +74,7 @@ struct secondary_data {
 };
 extern struct secondary_data secondary_data;
 extern volatile int pen_release;
+extern void secondary_startup(void);
 
 extern int __cpu_disable(void);
 
diff --git a/arch/arm/include/debug/tegra.S b/arch/arm/include/debug/tegra.S
index f98763f0bc17..3bc80599c022 100644
--- a/arch/arm/include/debug/tegra.S
+++ b/arch/arm/include/debug/tegra.S
@@ -53,8 +53,7 @@
 
 #define checkuart(rp, rv, lhu, bit, uart) \
 		/* Load address of CLK_RST register */ \
-		movw	rp, #TEGRA_CLK_RST_DEVICES_##lhu & 0xffff ; \
-		movt	rp, #TEGRA_CLK_RST_DEVICES_##lhu >> 16 ; \
+		ldr	rp, =TEGRA_CLK_RST_DEVICES_##lhu ; \
 		/* Load value from CLK_RST register */ \
 		ldr	rp, [rp, #0] ; \
 		/* Test UART's reset bit */ \
@@ -62,8 +61,7 @@
 		/* If set, can't use UART; jump to save no UART */ \
 		bne	90f ; \
 		/* Load address of CLK_OUT_ENB register */ \
-		movw	rp, #TEGRA_CLK_OUT_ENB_##lhu & 0xffff ; \
-		movt	rp, #TEGRA_CLK_OUT_ENB_##lhu >> 16 ; \
+		ldr	rp, =TEGRA_CLK_OUT_ENB_##lhu ; \
 		/* Load value from CLK_OUT_ENB register */ \
 		ldr	rp, [rp, #0] ; \
 		/* Test UART's clock enable bit */ \
@@ -71,8 +69,7 @@
 		/* If clear, can't use UART; jump to save no UART */ \
 		beq	90f ; \
 		/* Passed all tests, load address of UART registers */ \
-		movw	rp, #TEGRA_UART##uart##_BASE & 0xffff ; \
-		movt	rp, #TEGRA_UART##uart##_BASE >> 16 ; \
+		ldr	rp, =TEGRA_UART##uart##_BASE ; \
 		/* Jump to save UART address */ \
 		b 91f
 
@@ -90,15 +87,16 @@
 
 #ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA
 		/* Check ODMDATA */
-10:		movw	\rp, #TEGRA_PMC_SCRATCH20 & 0xffff
-		movt	\rp, #TEGRA_PMC_SCRATCH20 >> 16
+10:		ldr	\rp, =TEGRA_PMC_SCRATCH20
 		ldr	\rp, [\rp, #0]		@ Load PMC_SCRATCH20
-		ubfx	\rv, \rp, #18, #2	@ 19:18 are console type
+		lsr	\rv, \rp, #18		@ 19:18 are console type
+		and	\rv, \rv, #3
 		cmp	\rv, #2			@ 2 and 3 mean DCC, UART
 		beq	11f			@ some boards swap the meaning
 		cmp	\rv, #3			@ so accept either
 		bne	90f
-11:		ubfx	\rv, \rp, #15, #3	@ 17:15 are UART ID
+11:		lsr	\rv, \rp, #15		@ 17:15 are UART ID
+		and	\rv, #7	
 		cmp	\rv, #0			@ UART 0?
 		beq	20f
 		cmp	\rv, #1			@ UART 1?