summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-at91/at91cap9_devices.c
diff options
context:
space:
mode:
authorAndrew Victor <linux@maxim.org.za>2008-10-06 20:01:00 +0100
committerRussell King <rmk+kernel@arm.linux.org.uk>2008-12-01 17:18:10 +0000
commit461d3b4dcf2b3b92f819b668d16b36a87046fd98 (patch)
treeb4a2f88b992997a5c7d7771f6e9c4376e6489d44 /arch/arm/mach-at91/at91cap9_devices.c
parent6781002bec5237ee8ac1e1daeb0ba976e780a884 (diff)
downloadlinux-461d3b4dcf2b3b92f819b668d16b36a87046fd98.tar.gz
linux-461d3b4dcf2b3b92f819b668d16b36a87046fd98.tar.bz2
linux-461d3b4dcf2b3b92f819b668d16b36a87046fd98.zip
[ARM] 5288/1: [AT91] Remove SMC configuration from devices.c files
In at91_add_device_nand(), do not configure the Static Memory controller with specific timing values. The *_devices.c files are board independent, and the SMC timing values are specific to the NAND devices that are installed on the board. The board-specific files are now responsible for configuring the Static Memory controller (if the don't want to leave it up to a bootloader). Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch/arm/mach-at91/at91cap9_devices.c')
-rw-r--r--arch/arm/mach-at91/at91cap9_devices.c19
1 files changed, 2 insertions, 17 deletions
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index 5ebd4273d353..3a36182c50cc 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -406,28 +406,13 @@ static struct platform_device at91cap9_nand_device = {
void __init at91_add_device_nand(struct atmel_nand_data *data)
{
- unsigned long csa, mode;
+ unsigned long csa;
if (!data)
return;
csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
-
- /* set the bus interface characteristics */
- at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(1)
- | AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(1));
-
- at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(6)
- | AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(6));
-
- at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8));
-
- if (data->bus_width_16)
- mode = AT91_SMC_DBW_16;
- else
- mode = AT91_SMC_DBW_8;
- at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
/* enable pin */
if (data->enable_pin)