ARM: at91: remove at91rm9200 legacy boards files

Remove old board files that use at91rm9200 Atmel SoC. The
device tree is mature on this SoCs. It must be used now.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>

1 files changed, 0 insertions, 260 deletions

diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
deleted file mode 100644
index 0e35a45cf8d4..000000000000
--- a/arch/arm/mach-at91/board-csb337.c
+++ /dev/null
@@ -1,260 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-csb337.c
- *
- *  Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-static void __init csb337_init_early(void)
-{
-	/* Initialize processor: 3.6864 MHz crystal */
-	at91_initialize(3686400);
-}
-
-static struct macb_platform_data __initdata csb337_eth_data = {
-	.phy_irq_pin	= AT91_PIN_PC2,
-	.is_rmii	= 0,
-	/* The CSB337 bootloader stores the MAC the wrong-way around */
-	.rev_eth_addr	= 1,
-};
-
-static struct at91_usbh_data __initdata csb337_usbh_data = {
-	.ports		= 2,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata csb337_udc_data = {
-	.pullup_pin	= AT91_PIN_PA24,
-	.vbus_pin	= -EINVAL,
-};
-
-static struct i2c_board_info __initdata csb337_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("ds1307", 0x68),
-	},
-};
-
-static struct at91_cf_data __initdata csb337_cf_data = {
-	/*
-	 * connector P4 on the CSB 337 mates to
-	 * connector P8 on the CSB 300CF
-	 */
-
-	/* CSB337 specific */
-	.det_pin	= AT91_PIN_PC3,
-
-	/* CSB300CF specific */
-	.irq_pin	= AT91_PIN_PA19,
-	.vcc_pin	= AT91_PIN_PD0,
-	.rst_pin	= AT91_PIN_PD2,
-};
-
-static struct mci_platform_data __initdata csb337_mci0_data = {
-	.slot[0] = {
-		.bus_width	= 4,
-		.detect_pin	= AT91_PIN_PD5,
-		.wp_pin		= AT91_PIN_PD6,
-	},
-};
-
-static struct spi_board_info csb337_spi_devices[] = {
-	{	/* CAN controller */
-		.modalias	= "sak82c900",
-		.chip_select	= 0,
-		.max_speed_hz	= 6 * 1000 * 1000,
-	},
-};
-
-#define CSB_FLASH_BASE	AT91_CHIPSELECT_0
-#define CSB_FLASH_SIZE	SZ_8M
-
-static struct mtd_partition csb_flash_partitions[] = {
-	{
-		.name		= "uMON flash",
-		.offset		= 0,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= MTD_WRITEABLE,	/* read only */
-	}
-};
-
-static struct physmap_flash_data csb_flash_data = {
-	.width		= 2,
-	.parts		= csb_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(csb_flash_partitions),
-};
-
-static struct resource csb_flash_resources[] = {
-	{
-		.start	= CSB_FLASH_BASE,
-		.end	= CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device csb_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-				.platform_data = &csb_flash_data,
-			},
-	.resource	= csb_flash_resources,
-	.num_resources	= ARRAY_SIZE(csb_flash_resources),
-};
-
-/*
- * GPIO Buttons (on CSB300)
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button csb300_buttons[] = {
-	{
-		.gpio		= AT91_PIN_PB29,
-		.code		= BTN_0,
-		.desc		= "sw0",
-		.active_low	= 1,
-		.wakeup		= 1,
-	},
-	{
-		.gpio		= AT91_PIN_PB28,
-		.code		= BTN_1,
-		.desc		= "sw1",
-		.active_low	= 1,
-		.wakeup		= 1,
-	},
-	{
-		.gpio		= AT91_PIN_PA21,
-		.code		= BTN_2,
-		.desc		= "sw2",
-		.active_low	= 1,
-		.wakeup		= 1,
-	}
-};
-
-static struct gpio_keys_platform_data csb300_button_data = {
-	.buttons	= csb300_buttons,
-	.nbuttons	= ARRAY_SIZE(csb300_buttons),
-};
-
-static struct platform_device csb300_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &csb300_button_data,
-	}
-};
-
-static void __init csb300_add_device_buttons(void)
-{
-	at91_set_gpio_input(AT91_PIN_PB29, 1);	/* sw0 */
-	at91_set_deglitch(AT91_PIN_PB29, 1);
-	at91_set_gpio_input(AT91_PIN_PB28, 1);	/* sw1 */
-	at91_set_deglitch(AT91_PIN_PB28, 1);
-	at91_set_gpio_input(AT91_PIN_PA21, 1);	/* sw2 */
-	at91_set_deglitch(AT91_PIN_PA21, 1);
-
-	platform_device_register(&csb300_button_device);
-}
-#else
-static void __init csb300_add_device_buttons(void) {}
-#endif
-
-static struct gpio_led csb_leds[] = {
-	{	/* "led0", yellow */
-		.name			= "led0",
-		.gpio			= AT91_PIN_PB2,
-		.active_low		= 1,
-		.default_trigger	= "heartbeat",
-	},
-	{	/* "led1", green */
-		.name			= "led1",
-		.gpio			= AT91_PIN_PB1,
-		.active_low		= 1,
-		.default_trigger	= "mmc0",
-	},
-	{	/* "led2", yellow */
-		.name			= "led2",
-		.gpio			= AT91_PIN_PB0,
-		.active_low		= 1,
-		.default_trigger	= "ide-disk",
-	}
-};
-
-
-static void __init csb337_board_init(void)
-{
-	/* Serial */
-	/* DBGU on ttyS0 */
-	at91_register_uart(0, 0, 0);
-	at91_add_device_serial();
-	/* Ethernet */
-	at91_add_device_eth(&csb337_eth_data);
-	/* USB Host */
-	at91_add_device_usbh(&csb337_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&csb337_udc_data);
-	/* I2C */
-	at91_add_device_i2c(csb337_i2c_devices, ARRAY_SIZE(csb337_i2c_devices));
-	/* Compact Flash */
-	at91_set_gpio_input(AT91_PIN_PB22, 1);		/* IOIS16 */
-	at91_add_device_cf(&csb337_cf_data);
-	/* SPI */
-	at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
-	/* MMC */
-	at91_add_device_mci(0, &csb337_mci0_data);
-	/* NOR flash */
-	platform_device_register(&csb_flash);
-	/* LEDs */
-	at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds));
-	/* Switches on CSB300 */
-	csb300_add_device_buttons();
-}
-
-MACHINE_START(CSB337, "Cogent CSB337")
-	/* Maintainer: Bill Gatliff */
-	.init_time	= at91rm9200_timer_init,
-	.map_io		= at91_map_io,
-	.handle_irq	= at91_aic_handle_irq,
-	.init_early	= csb337_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= csb337_board_init,
-MACHINE_END