ARM: at91: uncompress: autodetect the uart to use

This will now autodetect the first uart enabled by the bootloader
and will use it for uncompress. This will still assume that the bootloader
configured it (pins and clock).

This also allows to include all soc headers together.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

10 files changed, 148 insertions, 129 deletions

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 8acc1649c820..885fdb93618b 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -9,15 +9,6 @@ config HAVE_AT91_DBGU0
 config HAVE_AT91_DBGU1
 	bool
 
-config HAVE_AT91_USART3
-	bool
-
-config HAVE_AT91_USART4
-	bool
-
-config HAVE_AT91_USART5
-	bool
-
 config AT91_SAM9_ALT_RESET
 	bool
 	default !ARCH_AT91X40
@@ -36,16 +27,12 @@ config ARCH_AT91RM9200
 	select CPU_ARM920T
 	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_DBGU0
-	select HAVE_AT91_USART3
 
 config ARCH_AT91SAM9260
 	bool "AT91SAM9260 or AT91SAM9XE"
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_DBGU0
-	select HAVE_AT91_USART3
-	select HAVE_AT91_USART4
-	select HAVE_AT91_USART5
 	select HAVE_NET_MACB
 
 config ARCH_AT91SAM9261
@@ -74,7 +61,6 @@ config ARCH_AT91SAM9RL
 	bool "AT91SAM9RL"
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
-	select HAVE_AT91_USART3
 	select HAVE_FB_ATMEL
 	select HAVE_AT91_DBGU0
 
@@ -83,16 +69,12 @@ config ARCH_AT91SAM9G20
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_DBGU0
-	select HAVE_AT91_USART3
-	select HAVE_AT91_USART4
-	select HAVE_AT91_USART5
 	select HAVE_NET_MACB
 
 config ARCH_AT91SAM9G45
 	bool "AT91SAM9G45 or AT91SAM9M10 families"
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
-	select HAVE_AT91_USART3
 	select HAVE_FB_ATMEL
 	select HAVE_NET_MACB
 	select HAVE_AT91_DBGU1
@@ -526,41 +508,6 @@ config AT91_TIMER_HZ
 	  system clock (of at least several MHz), rounding is less of a
 	  problem so it can be safer to use a decimal values like 100.
 
-choice
-	prompt "Select a UART for early kernel messages"
-
-config AT91_EARLY_DBGU0
-	bool "DBGU on rm9200, 9260/9g20, 9261/9g10, 9rl and 9x5"
-	depends on HAVE_AT91_DBGU0
-
-config AT91_EARLY_DBGU1
-	bool "DBGU on 9263 and 9g45"
-	depends on HAVE_AT91_DBGU1
-
-config AT91_EARLY_USART0
-	bool "USART0"
-
-config AT91_EARLY_USART1
-	bool "USART1"
-
-config AT91_EARLY_USART2
-	bool "USART2"
-	depends on ! ARCH_AT91X40
-
-config AT91_EARLY_USART3
-	bool "USART3"
-	depends on HAVE_AT91_USART3
-
-config AT91_EARLY_USART4
-	bool "USART4"
-	depends on HAVE_AT91_USART4
-
-config AT91_EARLY_USART5
-	bool "USART5"
-	depends on HAVE_AT91_USART5
-
-endchoice
-
 endmenu
 
 endif
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h
index 603e6aac2a4f..e67317c67761 100644
--- a/arch/arm/mach-at91/include/mach/at91rm9200.h
+++ b/arch/arm/mach-at91/include/mach/at91rm9200.h
@@ -88,11 +88,6 @@
 #define AT91RM9200_BASE_RTC	0xfffffe00	/* Real-Time Clock */
 #define AT91RM9200_BASE_MC	0xffffff00	/* Memory Controllers */
 
-#define AT91_USART0	AT91RM9200_BASE_US0
-#define AT91_USART1	AT91RM9200_BASE_US1
-#define AT91_USART2	AT91RM9200_BASE_US2
-#define AT91_USART3	AT91RM9200_BASE_US3
-
 /*
  * Internal Memory.
  */
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
index 08ae9afd00fe..416c7b6c56d3 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9260.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
@@ -95,13 +95,6 @@
 #define AT91SAM9260_BASE_WDT	0xfffffd40
 #define AT91SAM9260_BASE_GPBR	0xfffffd50
 
-#define AT91_USART0	AT91SAM9260_BASE_US0
-#define AT91_USART1	AT91SAM9260_BASE_US1
-#define AT91_USART2	AT91SAM9260_BASE_US2
-#define AT91_USART3	AT91SAM9260_BASE_US3
-#define AT91_USART4	AT91SAM9260_BASE_US4
-#define AT91_USART5	AT91SAM9260_BASE_US5
-
 
 /*
  * Internal Memory.
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index 44fbdc12ee62..a041406d06ee 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -79,10 +79,6 @@
 #define AT91SAM9261_BASE_WDT	0xfffffd40
 #define AT91SAM9261_BASE_GPBR	0xfffffd50
 
-#define AT91_USART0	AT91SAM9261_BASE_US0
-#define AT91_USART1	AT91SAM9261_BASE_US1
-#define AT91_USART2	AT91SAM9261_BASE_US2
-
 
 /*
  * Internal Memory.
diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h
index d96cbb2e03c4..d201029d60b3 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9263.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9263.h
@@ -95,10 +95,6 @@
 #define AT91SAM9263_BASE_RTT1	0xfffffd50
 #define AT91SAM9263_BASE_GPBR	0xfffffd60
 
-#define AT91_USART0	AT91SAM9263_BASE_US0
-#define AT91_USART1	AT91SAM9263_BASE_US1
-#define AT91_USART2	AT91SAM9263_BASE_US2
-
 #define AT91_SMC	AT91_SMC0
 
 /*
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
index d052abcff852..3a4da24d5911 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -106,11 +106,6 @@
 #define AT91SAM9G45_BASE_RTC	0xfffffdb0
 #define AT91SAM9G45_BASE_GPBR	0xfffffd60
 
-#define AT91_USART0	AT91SAM9G45_BASE_US0
-#define AT91_USART1	AT91SAM9G45_BASE_US1
-#define AT91_USART2	AT91SAM9G45_BASE_US2
-#define AT91_USART3	AT91SAM9G45_BASE_US3
-
 /*
  * Internal Memory.
  */
diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h
index e0073eb10144..a15db56d33fa 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9rl.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h
@@ -89,11 +89,6 @@
 #define AT91SAM9RL_BASE_GPBR	0xfffffd60
 #define AT91SAM9RL_BASE_RTC	0xfffffe00
 
-#define AT91_USART0	AT91SAM9RL_BASE_US0
-#define AT91_USART1	AT91SAM9RL_BASE_US1
-#define AT91_USART2	AT91SAM9RL_BASE_US2
-#define AT91_USART3	AT91SAM9RL_BASE_US3
-
 
 /*
  * Internal Memory.
diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5.h b/arch/arm/mach-at91/include/mach/at91sam9x5.h
index 88e43d534cdf..c75ee19b58d3 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9x5.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9x5.h
@@ -55,14 +55,6 @@
 #define AT91SAM9X5_BASE_USART2	0xf8024000
 
 /*
- * Base addresses for early serial code (uncompress.h)
- */
-#define AT91_DBGU	AT91_BASE_DBGU0
-#define AT91_USART0	AT91SAM9X5_BASE_USART0
-#define AT91_USART1	AT91SAM9X5_BASE_USART1
-#define AT91_USART2	AT91SAM9X5_BASE_USART2
-
-/*
  * Internal Memory.
  */
 #define AT91SAM9X5_SRAM_BASE	0x00300000	/* Internal SRAM base address */
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index e9e29a6c3868..3a01f8ff7e74 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -22,27 +22,17 @@
 /* 9263, 9g45 */
 #define AT91_BASE_DBGU1	0xffffee00
 
-#if defined(CONFIG_ARCH_AT91RM9200)
+#if defined(CONFIG_ARCH_AT91X40)
+#include <mach/at91x40.h>
+#else
 #include <mach/at91rm9200.h>
-#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
 #include <mach/at91sam9260.h>
-#elif defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10)
 #include <mach/at91sam9261.h>
-#elif defined(CONFIG_ARCH_AT91SAM9263)
 #include <mach/at91sam9263.h>
-#elif defined(CONFIG_ARCH_AT91SAM9RL)
 #include <mach/at91sam9rl.h>
-#elif defined(CONFIG_ARCH_AT91SAM9G45)
 #include <mach/at91sam9g45.h>
-#elif defined(CONFIG_ARCH_AT91SAM9X5)
 #include <mach/at91sam9x5.h>
-#elif defined(CONFIG_ARCH_AT91X40)
-#include <mach/at91x40.h>
-#else
-#error "Unsupported AT91 processor"
-#endif
 
-#if !defined(CONFIG_ARCH_AT91X40)
 /*
  * On all at91 except rm9200 and x40 have the System Controller starts
  * at address 0xffffc000 and has a size of 16KiB.
diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h
index d985af7c94bd..6f6118d1576a 100644
--- a/arch/arm/mach-at91/include/mach/uncompress.h
+++ b/arch/arm/mach-at91/include/mach/uncompress.h
@@ -1,7 +1,8 @@
 /*
  * arch/arm/mach-at91/include/mach/uncompress.h
  *
- *  Copyright (C) 2003 SAN People
+ * Copyright (C) 2003 SAN People
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -25,32 +26,149 @@
 #include <linux/atmel_serial.h>
 #include <mach/hardware.h>
 
-#if defined(CONFIG_AT91_EARLY_DBGU0)
-#define UART_OFFSET AT91_BASE_DBGU0
-#elif defined(CONFIG_AT91_EARLY_DBGU1)
-#define UART_OFFSET AT91_BASE_DBGU1
-#elif defined(CONFIG_AT91_EARLY_USART0)
-#define UART_OFFSET AT91_USART0
-#elif defined(CONFIG_AT91_EARLY_USART1)
-#define UART_OFFSET AT91_USART1
-#elif defined(CONFIG_AT91_EARLY_USART2)
-#define UART_OFFSET AT91_USART2
-#elif defined(CONFIG_AT91_EARLY_USART3)
-#define UART_OFFSET AT91_USART3
-#elif defined(CONFIG_AT91_EARLY_USART4)
-#define UART_OFFSET AT91_USART4
-#elif defined(CONFIG_AT91_EARLY_USART5)
-#define UART_OFFSET AT91_USART5
-#endif
+#include <mach/at91_dbgu.h>
+#include <mach/cpu.h>
 
 void __iomem *at91_uart;
 
+#if !defined(CONFIG_ARCH_AT91X40)
+static const u32 uarts_rm9200[] = {
+	AT91_BASE_DBGU0,
+	AT91RM9200_BASE_US0,
+	AT91RM9200_BASE_US1,
+	AT91RM9200_BASE_US2,
+	AT91RM9200_BASE_US3,
+	0,
+};
+
+static const u32 uarts_sam9260[] = {
+	AT91_BASE_DBGU0,
+	AT91SAM9260_BASE_US0,
+	AT91SAM9260_BASE_US1,
+	AT91SAM9260_BASE_US2,
+	AT91SAM9260_BASE_US3,
+	AT91SAM9260_BASE_US4,
+	AT91SAM9260_BASE_US5,
+	0,
+};
+
+static const u32 uarts_sam9261[] = {
+	AT91_BASE_DBGU0,
+	AT91SAM9261_BASE_US0,
+	AT91SAM9261_BASE_US1,
+	AT91SAM9261_BASE_US2,
+	0,
+};
+
+static const u32 uarts_sam9263[] = {
+	AT91_BASE_DBGU1,
+	AT91SAM9263_BASE_US0,
+	AT91SAM9263_BASE_US1,
+	AT91SAM9263_BASE_US2,
+	0,
+};
+
+static const u32 uarts_sam9g45[] = {
+	AT91_BASE_DBGU1,
+	AT91SAM9G45_BASE_US0,
+	AT91SAM9G45_BASE_US1,
+	AT91SAM9G45_BASE_US2,
+	AT91SAM9G45_BASE_US3,
+	0,
+};
+
+static const u32 uarts_sam9rl[] = {
+	AT91_BASE_DBGU0,
+	AT91SAM9RL_BASE_US0,
+	AT91SAM9RL_BASE_US1,
+	AT91SAM9RL_BASE_US2,
+	AT91SAM9RL_BASE_US3,
+	0,
+};
+
+static const u32 uarts_sam9x5[] = {
+	AT91_BASE_DBGU0,
+	AT91SAM9X5_BASE_USART0,
+	AT91SAM9X5_BASE_USART1,
+	AT91SAM9X5_BASE_USART2,
+	0,
+};
+
+static inline const u32* decomp_soc_detect(u32 dbgu_base)
+{
+	u32 cidr, socid;
+
+	cidr = __raw_readl(dbgu_base + AT91_DBGU_CIDR);
+	socid = cidr & ~AT91_CIDR_VERSION;
+
+	switch (socid) {
+	case ARCH_ID_AT91RM9200:
+		return uarts_rm9200;
+
+	case ARCH_ID_AT91SAM9G20:
+	case ARCH_ID_AT91SAM9260:
+		return uarts_sam9260;
+
+	case ARCH_ID_AT91SAM9261:
+		return uarts_sam9261;
+
+	case ARCH_ID_AT91SAM9263:
+		return uarts_sam9263;
+
+	case ARCH_ID_AT91SAM9G45:
+		return uarts_sam9g45;
+
+	case ARCH_ID_AT91SAM9RL64:
+		return uarts_sam9rl;
+
+	case ARCH_ID_AT91SAM9X5:
+		return uarts_sam9x5;
+	}
+
+	/* at91sam9g10 */
+	if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
+		return uarts_sam9261;
+	}
+	/* at91sam9xe */
+	else if ((cidr & AT91_CIDR_ARCH) == ARCH_FAMILY_AT91SAM9XE) {
+		return uarts_sam9260;
+	}
+
+	return NULL;
+}
+
 static inline void arch_decomp_setup(void)
 {
-#ifdef UART_OFFSET
-	at91_uart = (void __iomem *) UART_OFFSET;	/* physical address */
-#endif
+	int i = 0;
+	const u32* usarts;
+
+	usarts = decomp_soc_detect(AT91_BASE_DBGU0);
+
+	if (!usarts)
+		usarts = decomp_soc_detect(AT91_BASE_DBGU1);
+	if (!usarts) {
+		at91_uart = NULL;
+		return;
+	}
+
+	do {
+		/* physical address */
+		at91_uart = (void __iomem *)usarts[i];
+
+		if (__raw_readl(at91_uart + ATMEL_US_BRGR))
+			return;
+		i++;
+	} while (usarts[i]);
+
+	at91_uart = NULL;
 }
+#else
+static inline void arch_decomp_setup(void)
+{
+	at91_uart = NULL;
+}
+#endif
+
 /*
  * The following code assumes the serial port has already been
  * initialized by the bootloader.  If you didn't setup a port in
@@ -60,20 +178,22 @@ static inline void arch_decomp_setup(void)
  */
 static void putc(int c)
 {
-#ifdef UART_OFFSET
+	if (!at91_uart)
+		return;
+
 	while (!(__raw_readl(at91_uart + ATMEL_US_CSR) & ATMEL_US_TXRDY))
 		barrier();
 	__raw_writel(c, at91_uart + ATMEL_US_THR);
-#endif
 }
 
 static inline void flush(void)
 {
-#ifdef UART_OFFSET
+	if (!at91_uart)
+		return;
+
 	/* wait for transmission to complete */
 	while (!(__raw_readl(at91_uart + ATMEL_US_CSR) & ATMEL_US_TXEMPTY))
 		barrier();
-#endif
 }
 
 #define arch_decomp_wdog()