Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Kevin Hilman:
 "A relatively small setup of cleanups this time around, and similar to
  last time the bulk of it is removal of legacy board support:

   - OMAP: removal of legacy (non-DT) booting for several platforms

   - i.MX: remove some legacy board files"

* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (36 commits)
  ARM: fix EFM32 build breakage caused by cpu_resume_arm
  ARM: 8389/1: Add cpu_resume_arm() for firmwares that resume in ARM state
  ARM: v7 setup function should invalidate L1 cache
  mach-omap2: Remove use of deprecated marco, PTR_RET in devices.c
  ARM: OMAP2+: Remove calls to deprecacted marco,PTR_RET in the files,fb.c and pmu.c
  ARM: OMAP2+: Constify irq_domain_ops
  ARM: OMAP2+: use symbolic defines for console loglevels instead of numbers
  ARM: at91: remove useless Makefile.boot
  ARM: at91: remove at91rm9200_sdramc.h
  ARM: at91: remove mach/at91_ramc.h and mach/at91rm9200_mc.h
  ARM: at91/pm: use the atmel-mc syscon defines
  pcmcia: at91_cf: Use syscon to configure the MC/smc
  ARM: at91: declare the at91rm9200 memory controller as a syscon
  mfd: syscon: Add Atmel MC (Memory Controller) registers definition
  ARM: at91: drop sam9_smc.c
  ata: at91: use syscon to configure the smc
  ARM: ux500: delete static resource defines
  ARM: ux500: rename ux500_map_io
  ARM: ux500: look up PRCMU resource from DT
  ARM: ux500: kill off L2CC static map
  ...

10 files changed, 18 insertions, 409 deletions

diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 4fa8b4541e64..c5bbf8bb8c0f 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -1,13 +1,8 @@
 #
 # Makefile for the linux kernel.
 #
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
-asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
-
 obj-y		:= soc.o
 
-obj-$(CONFIG_SOC_AT91SAM9)	+= sam9_smc.o
-
 # CPU-specific support
 obj-$(CONFIG_SOC_AT91RM9200)	+= at91rm9200.o
 obj-$(CONFIG_SOC_AT91SAM9)	+= at91sam9.o
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
deleted file mode 100644
index 29ed0fa374ca..000000000000
--- a/arch/arm/mach-at91/Makefile.boot
+++ /dev/null
@@ -1,8 +0,0 @@
-# Note: the following conditions must always be true:
-#   ZRELADDR == virt_to_phys(TEXTADDR)
-#   PARAMS_PHYS must be within 4MB of ZRELADDR
-#   INITRD_PHYS must be in RAM
-
-   zreladdr-y	+= 0x20008000
-params_phys-y	:= 0x20000100
-initrd_phys-y	:= 0x20410000
diff --git a/arch/arm/mach-at91/include/mach/at91_ramc.h b/arch/arm/mach-at91/include/mach/at91_ramc.h
deleted file mode 100644
index 493bc486e858..000000000000
--- a/arch/arm/mach-at91/include/mach/at91_ramc.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Header file for the Atmel RAM Controller
- *
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Under GPLv2 only
- */
-
-#ifndef __AT91_RAMC_H__
-#define __AT91_RAMC_H__
-
-#ifndef __ASSEMBLY__
-extern void __iomem *at91_ramc_base[];
-
-#define at91_ramc_read(id, field) \
-	__raw_readl(at91_ramc_base[id] + field)
-
-#define at91_ramc_write(id, field, value) \
-	__raw_writel(value, at91_ramc_base[id] + field)
-#else
-.extern at91_ramc_base
-#endif
-
-#include <soc/at91/at91rm9200_sdramc.h>
-#include <soc/at91/at91sam9_ddrsdr.h>
-#include <soc/at91/at91sam9_sdramc.h>
-
-#endif /* __AT91_RAMC_H__ */
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200_mc.h b/arch/arm/mach-at91/include/mach/at91rm9200_mc.h
deleted file mode 100644
index aeaadfb452af..000000000000
--- a/arch/arm/mach-at91/include/mach/at91rm9200_mc.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91rm9200_mc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Memory Controllers (MC, EBI, SMC, SDRAMC, BFC) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_MC_H
-#define AT91RM9200_MC_H
-
-/* Memory Controller */
-#define AT91_MC_RCR		0x00			/* MC Remap Control Register */
-#define		AT91_MC_RCB		(1 <<  0)		/* Remap Command Bit */
-
-#define AT91_MC_ASR		0x04			/* MC Abort Status Register */
-#define		AT91_MC_UNADD		(1 <<  0)		/* Undefined Address Abort Status */
-#define		AT91_MC_MISADD		(1 <<  1)		/* Misaligned Address Abort Status */
-#define		AT91_MC_ABTSZ		(3 <<  8)		/* Abort Size Status */
-#define			AT91_MC_ABTSZ_BYTE		(0 << 8)
-#define			AT91_MC_ABTSZ_HALFWORD		(1 << 8)
-#define			AT91_MC_ABTSZ_WORD		(2 << 8)
-#define		AT91_MC_ABTTYP		(3 << 10)		/* Abort Type Status */
-#define			AT91_MC_ABTTYP_DATAREAD		(0 << 10)
-#define			AT91_MC_ABTTYP_DATAWRITE	(1 << 10)
-#define			AT91_MC_ABTTYP_FETCH		(2 << 10)
-#define		AT91_MC_MST0		(1 << 16)		/* ARM920T Abort Source */
-#define		AT91_MC_MST1		(1 << 17)		/* PDC Abort Source */
-#define		AT91_MC_MST2		(1 << 18)		/* UHP Abort Source */
-#define		AT91_MC_MST3		(1 << 19)		/* EMAC Abort Source */
-#define		AT91_MC_SVMST0		(1 << 24)		/* Saved ARM920T Abort Source */
-#define		AT91_MC_SVMST1		(1 << 25)		/* Saved PDC Abort Source */
-#define		AT91_MC_SVMST2		(1 << 26)		/* Saved UHP Abort Source */
-#define		AT91_MC_SVMST3		(1 << 27)		/* Saved EMAC Abort Source */
-
-#define AT91_MC_AASR		0x08			/* MC Abort Address Status Register */
-
-#define AT91_MC_MPR		0x0c			/* MC Master Priority Register */
-#define		AT91_MPR_MSTP0		(7 <<  0)		/* ARM920T Priority */
-#define		AT91_MPR_MSTP1		(7 <<  4)		/* PDC Priority */
-#define		AT91_MPR_MSTP2		(7 <<  8)		/* UHP Priority */
-#define		AT91_MPR_MSTP3		(7 << 12)		/* EMAC Priority */
-
-/* External Bus Interface (EBI) registers */
-#define AT91_EBI_CSA		0x60			/* Chip Select Assignment Register */
-#define		AT91_EBI_CS0A		(1 << 0)		/* Chip Select 0 Assignment */
-#define			AT91_EBI_CS0A_SMC		(0 << 0)
-#define			AT91_EBI_CS0A_BFC		(1 << 0)
-#define		AT91_EBI_CS1A		(1 << 1)		/* Chip Select 1 Assignment */
-#define			AT91_EBI_CS1A_SMC		(0 << 1)
-#define			AT91_EBI_CS1A_SDRAMC		(1 << 1)
-#define		AT91_EBI_CS3A		(1 << 3)		/* Chip Select 2 Assignment */
-#define			AT91_EBI_CS3A_SMC		(0 << 3)
-#define			AT91_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_EBI_CS4A		(1 << 4)		/* Chip Select 3 Assignment */
-#define			AT91_EBI_CS4A_SMC		(0 << 4)
-#define			AT91_EBI_CS4A_SMC_COMPACTFLASH	(1 << 4)
-#define AT91_EBI_CFGR		(AT91_MC + 0x64)	/* Configuration Register */
-#define		AT91_EBI_DBPUC		(1 << 0)		/* Data Bus Pull-Up Configuration */
-
-/* Static Memory Controller (SMC) registers */
-#define	AT91_SMC_CSR(n)		(0x70 + ((n) * 4))	/* SMC Chip Select Register */
-#define		AT91_SMC_NWS		(0x7f <<  0)		/* Number of Wait States */
-#define			AT91_SMC_NWS_(x)	((x) << 0)
-#define		AT91_SMC_WSEN		(1    <<  7)		/* Wait State Enable */
-#define		AT91_SMC_TDF		(0xf  <<  8)		/* Data Float Time */
-#define			AT91_SMC_TDF_(x)	((x) << 8)
-#define		AT91_SMC_BAT		(1    << 12)		/* Byte Access Type */
-#define		AT91_SMC_DBW		(3    << 13)		/* Data Bus Width */
-#define			AT91_SMC_DBW_16		(1 << 13)
-#define			AT91_SMC_DBW_8		(2 << 13)
-#define		AT91_SMC_DPR		(1 << 15)		/* Data Read Protocol */
-#define		AT91_SMC_ACSS		(3 << 16)		/* Address to Chip Select Setup */
-#define			AT91_SMC_ACSS_STD	(0 << 16)
-#define			AT91_SMC_ACSS_1		(1 << 16)
-#define			AT91_SMC_ACSS_2		(2 << 16)
-#define			AT91_SMC_ACSS_3		(3 << 16)
-#define		AT91_SMC_RWSETUP	(7 << 24)		/* Read & Write Signal Time Setup */
-#define			AT91_SMC_RWSETUP_(x)	((x) << 24)
-#define		AT91_SMC_RWHOLD		(7 << 28)		/* Read & Write Signal Hold Time */
-#define			AT91_SMC_RWHOLD_(x)	((x) << 28)
-
-/* Burst Flash Controller register */
-#define AT91_BFC_MR		0xc0			/* Mode Register */
-#define		AT91_BFC_BFCOM		(3   <<  0)		/* Burst Flash Controller Operating Mode */
-#define			AT91_BFC_BFCOM_DISABLED	(0 << 0)
-#define			AT91_BFC_BFCOM_ASYNC	(1 << 0)
-#define			AT91_BFC_BFCOM_BURST	(2 << 0)
-#define		AT91_BFC_BFCC		(3   <<  2)		/* Burst Flash Controller Clock */
-#define			AT91_BFC_BFCC_MCK	(1 << 2)
-#define			AT91_BFC_BFCC_DIV2	(2 << 2)
-#define			AT91_BFC_BFCC_DIV4	(3 << 2)
-#define		AT91_BFC_AVL		(0xf <<  4)		/* Address Valid Latency */
-#define		AT91_BFC_PAGES		(7   <<  8)		/* Page Size */
-#define			AT91_BFC_PAGES_NO_PAGE	(0 << 8)
-#define			AT91_BFC_PAGES_16	(1 << 8)
-#define			AT91_BFC_PAGES_32	(2 << 8)
-#define			AT91_BFC_PAGES_64	(3 << 8)
-#define			AT91_BFC_PAGES_128	(4 << 8)
-#define			AT91_BFC_PAGES_256	(5 << 8)
-#define			AT91_BFC_PAGES_512	(6 << 8)
-#define			AT91_BFC_PAGES_1024	(7 << 8)
-#define		AT91_BFC_OEL		(3   << 12)		/* Output Enable Latency */
-#define		AT91_BFC_BAAEN		(1   << 16)		/* Burst Address Advance Enable */
-#define		AT91_BFC_BFOEH		(1   << 17)		/* Burst Flash Output Enable Handling */
-#define		AT91_BFC_MUXEN		(1   << 18)		/* Multiplexed Bus Enable */
-#define		AT91_BFC_RDYEN		(1   << 19)		/* Ready Enable Mode */
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_smc.h b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
deleted file mode 100644
index ff54a0ce90e3..000000000000
--- a/arch/arm/mach-at91/include/mach/at91sam9_smc.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91sam9_smc.h
- *
- * Copyright (C) 2007 Andrew Victor
- * Copyright (C) 2007 Atmel Corporation.
- *
- * Static Memory Controllers (SMC) - System peripherals registers.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9_SMC_H
-#define AT91SAM9_SMC_H
-
-#ifndef __ASSEMBLY__
-struct sam9_smc_config {
-	/* Setup register */
-	u8 ncs_read_setup;
-	u8 nrd_setup;
-	u8 ncs_write_setup;
-	u8 nwe_setup;
-
-	/* Pulse register */
-	u8 ncs_read_pulse;
-	u8 nrd_pulse;
-	u8 ncs_write_pulse;
-	u8 nwe_pulse;
-
-	/* Cycle register */
-	u16 read_cycle;
-	u16 write_cycle;
-
-	/* Mode register */
-	u32 mode;
-	u8 tdf_cycles:4;
-};
-
-extern void sam9_smc_configure(int id, int cs, struct sam9_smc_config *config);
-extern void sam9_smc_read(int id, int cs, struct sam9_smc_config *config);
-extern void sam9_smc_read_mode(int id, int cs, struct sam9_smc_config *config);
-extern void sam9_smc_write_mode(int id, int cs, struct sam9_smc_config *config);
-#endif
-
-#define AT91_SMC_SETUP		0x00				/* Setup Register for CS n */
-#define		AT91_SMC_NWESETUP	(0x3f << 0)			/* NWE Setup Length */
-#define			AT91_SMC_NWESETUP_(x)	((x) << 0)
-#define		AT91_SMC_NCS_WRSETUP	(0x3f << 8)			/* NCS Setup Length in Write Access */
-#define			AT91_SMC_NCS_WRSETUP_(x)	((x) << 8)
-#define		AT91_SMC_NRDSETUP	(0x3f << 16)			/* NRD Setup Length */
-#define			AT91_SMC_NRDSETUP_(x)	((x) << 16)
-#define		AT91_SMC_NCS_RDSETUP	(0x3f << 24)			/* NCS Setup Length in Read Access */
-#define			AT91_SMC_NCS_RDSETUP_(x)	((x) << 24)
-
-#define AT91_SMC_PULSE		0x04				/* Pulse Register for CS n */
-#define		AT91_SMC_NWEPULSE	(0x7f <<  0)			/* NWE Pulse Length */
-#define			AT91_SMC_NWEPULSE_(x)	((x) << 0)
-#define		AT91_SMC_NCS_WRPULSE	(0x7f <<  8)			/* NCS Pulse Length in Write Access */
-#define			AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
-#define		AT91_SMC_NRDPULSE	(0x7f << 16)			/* NRD Pulse Length */
-#define			AT91_SMC_NRDPULSE_(x)	((x) << 16)
-#define		AT91_SMC_NCS_RDPULSE	(0x7f << 24)			/* NCS Pulse Length in Read Access */
-#define			AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
-
-#define AT91_SMC_CYCLE		0x08				/* Cycle Register for CS n */
-#define		AT91_SMC_NWECYCLE	(0x1ff << 0 )			/* Total Write Cycle Length */
-#define			AT91_SMC_NWECYCLE_(x)	((x) << 0)
-#define		AT91_SMC_NRDCYCLE	(0x1ff << 16)			/* Total Read Cycle Length */
-#define			AT91_SMC_NRDCYCLE_(x)	((x) << 16)
-
-#define AT91_SMC_MODE		0x0c				/* Mode Register for CS n */
-#define		AT91_SMC_READMODE	(1 <<  0)			/* Read Mode */
-#define		AT91_SMC_WRITEMODE	(1 <<  1)			/* Write Mode */
-#define		AT91_SMC_EXNWMODE	(3 <<  4)			/* NWAIT Mode */
-#define			AT91_SMC_EXNWMODE_DISABLE	(0 << 4)
-#define			AT91_SMC_EXNWMODE_FROZEN	(2 << 4)
-#define			AT91_SMC_EXNWMODE_READY		(3 << 4)
-#define		AT91_SMC_BAT		(1 <<  8)			/* Byte Access Type */
-#define			AT91_SMC_BAT_SELECT		(0 << 8)
-#define			AT91_SMC_BAT_WRITE		(1 << 8)
-#define		AT91_SMC_DBW		(3 << 12)			/* Data Bus Width */
-#define			AT91_SMC_DBW_8			(0 << 12)
-#define			AT91_SMC_DBW_16			(1 << 12)
-#define			AT91_SMC_DBW_32			(2 << 12)
-#define		AT91_SMC_TDF		(0xf << 16)			/* Data Float Time. */
-#define			AT91_SMC_TDF_(x)		((x) << 16)
-#define		AT91_SMC_TDFMODE	(1 << 20)			/* TDF Optimization - Enabled */
-#define		AT91_SMC_PMEN		(1 << 24)			/* Page Mode Enabled */
-#define		AT91_SMC_PS		(3 << 28)			/* Page Size */
-#define			AT91_SMC_PS_4			(0 << 28)
-#define			AT91_SMC_PS_8			(1 << 28)
-#define			AT91_SMC_PS_16			(2 << 28)
-#define			AT91_SMC_PS_32			(3 << 28)
-
-#endif
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 5062699cbb12..1e184767c3be 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -233,7 +233,7 @@ static void at91_pm_set_standby(void (*at91_standby)(void))
  */
 static void at91rm9200_standby(void)
 {
-	u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR);
+	u32 lpr = at91_ramc_read(0, AT91_MC_SDRAMC_LPR);
 
 	asm volatile(
 		"b    1f\n\t"
@@ -244,8 +244,8 @@ static void at91rm9200_standby(void)
 		"    mcr    p15, 0, %0, c7, c0, 4\n\t"
 		"    str    %5, [%1, %2]"
 		:
-		: "r" (0), "r" (at91_ramc_base[0]), "r" (AT91RM9200_SDRAMC_LPR),
-		  "r" (1), "r" (AT91RM9200_SDRAMC_SRR),
+		: "r" (0), "r" (at91_ramc_base[0]), "r" (AT91_MC_SDRAMC_LPR),
+		  "r" (1), "r" (AT91_MC_SDRAMC_SRR),
 		  "r" (lpr));
 }
 
@@ -414,7 +414,7 @@ void __init at91rm9200_pm_init(void)
 	/*
 	 * AT91RM9200 SDRAM low-power mode cannot be used with self-refresh.
 	 */
-	at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0);
+	at91_ramc_write(0, AT91_MC_SDRAMC_LPR, 0);
 
 	at91_pm_data.uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP;
 	at91_pm_data.memctrl = AT91_MEMCTRL_MC;
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index ecd875a91d52..3fcf8810f14e 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -13,7 +13,19 @@
 
 #include <asm/proc-fns.h>
 
-#include <mach/at91_ramc.h>
+#include <linux/mfd/syscon/atmel-mc.h>
+#include <soc/at91/at91sam9_ddrsdr.h>
+#include <soc/at91/at91sam9_sdramc.h>
+
+#ifndef __ASSEMBLY__
+extern void __iomem *at91_ramc_base[];
+
+#define at91_ramc_read(id, field) \
+	__raw_readl(at91_ramc_base[id] + field)
+
+#define at91_ramc_write(id, field, value) \
+	__raw_writel(value, at91_ramc_base[id] + field)
+#endif
 
 #define AT91_MEMCTRL_MC		0
 #define AT91_MEMCTRL_SDRAMC	1
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index bd22b2c8a051..0d95f488b47a 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -13,7 +13,6 @@
  */
 #include <linux/linkage.h>
 #include <linux/clk/at91_pmc.h>
-#include <mach/at91_ramc.h>
 #include "pm.h"
 
 #define	SRAMC_SELF_FRESH_ACTIVE		0x01
@@ -216,7 +215,7 @@ ENTRY(at91_sramc_self_refresh)
 
 	/* Active SDRAM self-refresh mode */
 	mov	r3, #1
-	str	r3, [r2, #AT91RM9200_SDRAMC_SRR]
+	str	r3, [r2, #AT91_MC_SDRAMC_SRR]
 	b	exit_sramc_sf
 
 ddrc_sf:
diff --git a/arch/arm/mach-at91/sam9_smc.c b/arch/arm/mach-at91/sam9_smc.c
deleted file mode 100644
index 826315af6d11..000000000000
--- a/arch/arm/mach-at91/sam9_smc.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/sam9_smc.c
- *
- * Copyright (C) 2008 Andrew Victor
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include <mach/at91sam9_smc.h>
-
-#include "sam9_smc.h"
-
-
-#define AT91_SMC_CS(id, n)	(smc_base_addr[id] + ((n) * 0x10))
-
-static void __iomem *smc_base_addr[2];
-
-static void sam9_smc_cs_write_mode(void __iomem *base,
-					struct sam9_smc_config *config)
-{
-	__raw_writel(config->mode
-		   | AT91_SMC_TDF_(config->tdf_cycles),
-		   base + AT91_SMC_MODE);
-}
-
-void sam9_smc_write_mode(int id, int cs,
-					struct sam9_smc_config *config)
-{
-	sam9_smc_cs_write_mode(AT91_SMC_CS(id, cs), config);
-}
-EXPORT_SYMBOL_GPL(sam9_smc_write_mode);
-
-static void sam9_smc_cs_configure(void __iomem *base,
-					struct sam9_smc_config *config)
-{
-
-	/* Setup register */
-	__raw_writel(AT91_SMC_NWESETUP_(config->nwe_setup)
-		   | AT91_SMC_NCS_WRSETUP_(config->ncs_write_setup)
-		   | AT91_SMC_NRDSETUP_(config->nrd_setup)
-		   | AT91_SMC_NCS_RDSETUP_(config->ncs_read_setup),
-		   base + AT91_SMC_SETUP);
-
-	/* Pulse register */
-	__raw_writel(AT91_SMC_NWEPULSE_(config->nwe_pulse)
-		   | AT91_SMC_NCS_WRPULSE_(config->ncs_write_pulse)
-		   | AT91_SMC_NRDPULSE_(config->nrd_pulse)
-		   | AT91_SMC_NCS_RDPULSE_(config->ncs_read_pulse),
-		   base + AT91_SMC_PULSE);
-
-	/* Cycle register */
-	__raw_writel(AT91_SMC_NWECYCLE_(config->write_cycle)
-		   | AT91_SMC_NRDCYCLE_(config->read_cycle),
-		   base + AT91_SMC_CYCLE);
-
-	/* Mode register */
-	sam9_smc_cs_write_mode(base, config);
-}
-
-void sam9_smc_configure(int id, int cs,
-					struct sam9_smc_config *config)
-{
-	sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config);
-}
-EXPORT_SYMBOL_GPL(sam9_smc_configure);
-
-static void sam9_smc_cs_read_mode(void __iomem *base,
-					struct sam9_smc_config *config)
-{
-	u32 val = __raw_readl(base + AT91_SMC_MODE);
-
-	config->mode = (val & ~AT91_SMC_NWECYCLE);
-	config->tdf_cycles = (val & AT91_SMC_NWECYCLE) >> 16 ;
-}
-
-void sam9_smc_read_mode(int id, int cs,
-					struct sam9_smc_config *config)
-{
-	sam9_smc_cs_read_mode(AT91_SMC_CS(id, cs), config);
-}
-EXPORT_SYMBOL_GPL(sam9_smc_read_mode);
-
-static void sam9_smc_cs_read(void __iomem *base,
-					struct sam9_smc_config *config)
-{
-	u32 val;
-
-	/* Setup register */
-	val = __raw_readl(base + AT91_SMC_SETUP);
-
-	config->nwe_setup = val & AT91_SMC_NWESETUP;
-	config->ncs_write_setup = (val & AT91_SMC_NCS_WRSETUP) >> 8;
-	config->nrd_setup = (val & AT91_SMC_NRDSETUP) >> 16;
-	config->ncs_read_setup = (val & AT91_SMC_NCS_RDSETUP) >> 24;
-
-	/* Pulse register */
-	val = __raw_readl(base + AT91_SMC_PULSE);
-
-	config->nwe_pulse = val & AT91_SMC_NWEPULSE;
-	config->ncs_write_pulse = (val & AT91_SMC_NCS_WRPULSE) >> 8;
-	config->nrd_pulse = (val & AT91_SMC_NRDPULSE) >> 16;
-	config->ncs_read_pulse = (val & AT91_SMC_NCS_RDPULSE) >> 24;
-
-	/* Cycle register */
-	val = __raw_readl(base + AT91_SMC_CYCLE);
-
-	config->write_cycle = val & AT91_SMC_NWECYCLE;
-	config->read_cycle = (val & AT91_SMC_NRDCYCLE) >> 16;
-
-	/* Mode register */
-	sam9_smc_cs_read_mode(base, config);
-}
-
-void sam9_smc_read(int id, int cs, struct sam9_smc_config *config)
-{
-	sam9_smc_cs_read(AT91_SMC_CS(id, cs), config);
-}
-
-void __init at91sam9_ioremap_smc(int id, u32 addr)
-{
-	if (id > 1) {
-		pr_warn("%s: id > 2\n", __func__);
-		return;
-	}
-	smc_base_addr[id] = ioremap(addr, 512);
-	if (!smc_base_addr[id])
-		pr_warn("Impossible to ioremap smc.%d 0x%x\n", id, addr);
-}
diff --git a/arch/arm/mach-at91/sam9_smc.h b/arch/arm/mach-at91/sam9_smc.h
deleted file mode 100644
index 3e52dcd4a59f..000000000000
--- a/arch/arm/mach-at91/sam9_smc.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/sam9_smc.
- *
- * Copyright (C) 2008 Andrew Victor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-extern void __init at91sam9_ioremap_smc(int id, u32 addr);