Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 378 insertions, 0 deletions

diff --git a/arch/arm/mach-ebsa110/io.c b/arch/arm/mach-ebsa110/io.c
new file mode 100644
index 000000000000..ef7eb5dc91bd
--- /dev/null
+++ b/arch/arm/mach-ebsa110/io.c
@@ -0,0 +1,378 @@
+/*
+ *  linux/arch/arm/mach-ebsa110/isamem.c
+ *
+ *  Copyright (C) 2001 Russell King
+ *
+ * Perform "ISA" memory and IO accesses.  The EBSA110 has some "peculiarities"
+ * in the way it handles accesses to odd IO ports on 16-bit devices.  These
+ * devices have their D0-D15 lines connected to the processors D0-D15 lines.
+ * Since they expect all byte IO operations to be performed on D0-D7, and the
+ * StrongARM expects to transfer the byte to these odd addresses on D8-D15,
+ * we must use a trick to get the required behaviour.
+ *
+ * The trick employed here is to use long word stores to odd address -1.  The
+ * glue logic picks this up as a "trick" access, and asserts the LSB of the
+ * peripherals address bus, thereby accessing the odd IO port.  Meanwhile, the
+ * StrongARM transfers its data on D0-D7 as expected.
+ *
+ * Things get more interesting on the pass-1 EBSA110 - the PCMCIA controller
+ * wiring was screwed in such a way that it had limited memory space access.
+ * Luckily, the work-around for this is not too horrible.  See
+ * __isamem_convert_addr for the details.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#include <asm/io.h>
+#include <asm/page.h>
+
+static void __iomem *__isamem_convert_addr(void __iomem *addr)
+{
+	u32 ret, a = (u32 __force) addr;
+
+	/*
+	 * The PCMCIA controller is wired up as follows:
+	 *        +---------+---------+---------+---------+---------+---------+
+	 * PCMCIA | 2 2 2 2 | 1 1 1 1 | 1 1 1 1 | 1 1     |         |         |
+	 *        | 3 2 1 0 | 9 8 7 6 | 5 4 3 2 | 1 0 9 8 | 7 6 5 4 | 3 2 1 0 |
+	 *        +---------+---------+---------+---------+---------+---------+
+	 *  CPU   | 2 2 2 2 | 2 1 1 1 | 1 1 1 1 | 1 1 1   |         |         |
+	 *        | 4 3 2 1 | 0 9 9 8 | 7 6 5 4 | 3 2 0 9 | 8 7 6 5 | 4 3 2 x |
+	 *        +---------+---------+---------+---------+---------+---------+
+	 *
+	 * This means that we can access PCMCIA regions as follows:
+	 *	0x*10000 -> 0x*1ffff
+	 *	0x*70000 -> 0x*7ffff
+	 *	0x*90000 -> 0x*9ffff
+	 *	0x*f0000 -> 0x*fffff
+	 */
+	ret  = (a & 0xf803fe) << 1;
+	ret |= (a & 0x03fc00) << 2;
+
+	ret += 0xe8000000;
+
+	if ((a & 0x20000) == (a & 0x40000) >> 1)
+		return (void __iomem *)ret;
+
+	BUG();
+	return NULL;
+}
+
+/*
+ * read[bwl] and write[bwl]
+ */
+u8 __readb(void __iomem *addr)
+{
+	void __iomem *a = __isamem_convert_addr(addr);
+	u32 ret;
+
+	if ((unsigned long)addr & 1)
+		ret = __raw_readl(a);
+	else
+		ret = __raw_readb(a);
+	return ret;
+}
+
+u16 __readw(void __iomem *addr)
+{
+	void __iomem *a = __isamem_convert_addr(addr);
+
+	if ((unsigned long)addr & 1)
+		BUG();
+
+	return __raw_readw(a);
+}
+
+u32 __readl(void __iomem *addr)
+{
+	void __iomem *a = __isamem_convert_addr(addr);
+	u32 ret;
+
+	if ((unsigned long)addr & 3)
+		BUG();
+
+	ret = __raw_readw(a);
+	ret |= __raw_readw(a + 4) << 16;
+	return ret;
+}
+
+EXPORT_SYMBOL(__readb);
+EXPORT_SYMBOL(__readw);
+EXPORT_SYMBOL(__readl);
+
+void __writeb(u8 val, void __iomem *addr)
+{
+	void __iomem *a = __isamem_convert_addr(addr);
+
+	if ((unsigned long)addr & 1)
+		__raw_writel(val, a);
+	else
+		__raw_writeb(val, a);
+}
+
+void __writew(u16 val, void __iomem *addr)
+{
+	void __iomem *a = __isamem_convert_addr(addr);
+
+	if ((unsigned long)addr & 1)
+		BUG();
+
+	__raw_writew(val, a);
+}
+
+void __writel(u32 val, void __iomem *addr)
+{
+	void __iomem *a = __isamem_convert_addr(addr);
+
+	if ((unsigned long)addr & 3)
+		BUG();
+
+	__raw_writew(val, a);
+	__raw_writew(val >> 16, a + 4);
+}
+
+EXPORT_SYMBOL(__writeb);
+EXPORT_SYMBOL(__writew);
+EXPORT_SYMBOL(__writel);
+
+#define SUPERIO_PORT(p) \
+	(((p) >> 3) == (0x3f8 >> 3) || \
+	 ((p) >> 3) == (0x2f8 >> 3) || \
+	 ((p) >> 3) == (0x378 >> 3))
+
+/*
+ * We're addressing an 8 or 16-bit peripheral which tranfers
+ * odd addresses on the low ISA byte lane.
+ */
+u8 __inb8(unsigned int port)
+{
+	u32 ret;
+
+	/*
+	 * The SuperIO registers use sane addressing techniques...
+	 */
+	if (SUPERIO_PORT(port))
+		ret = __raw_readb((void __iomem *)ISAIO_BASE + (port << 2));
+	else {
+		void __iomem *a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1);
+
+		/*
+		 * Shame nothing else does
+		 */
+		if (port & 1)
+			ret = __raw_readl(a);
+		else
+			ret = __raw_readb(a);
+	}
+	return ret;
+}
+
+/*
+ * We're addressing a 16-bit peripheral which transfers odd
+ * addresses on the high ISA byte lane.
+ */
+u8 __inb16(unsigned int port)
+{
+	unsigned int offset;
+
+	/*
+	 * The SuperIO registers use sane addressing techniques...
+	 */
+	if (SUPERIO_PORT(port))
+		offset = port << 2;
+	else
+		offset = (port & ~1) << 1 | (port & 1);
+
+	return __raw_readb((void __iomem *)ISAIO_BASE + offset);
+}
+
+u16 __inw(unsigned int port)
+{
+	unsigned int offset;
+
+	/*
+	 * The SuperIO registers use sane addressing techniques...
+	 */
+	if (SUPERIO_PORT(port))
+		offset = port << 2;
+	else {
+		offset = port << 1;
+		BUG_ON(port & 1);
+	}
+	return __raw_readw((void __iomem *)ISAIO_BASE + offset);
+}
+
+/*
+ * Fake a 32-bit read with two 16-bit reads.  Needed for 3c589.
+ */
+u32 __inl(unsigned int port)
+{
+	void __iomem *a;
+
+	if (SUPERIO_PORT(port) || port & 3)
+		BUG();
+
+	a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1);
+
+	return __raw_readw(a) | __raw_readw(a + 4) << 16;
+}
+
+EXPORT_SYMBOL(__inb8);
+EXPORT_SYMBOL(__inb16);
+EXPORT_SYMBOL(__inw);
+EXPORT_SYMBOL(__inl);
+
+void __outb8(u8 val, unsigned int port)
+{
+	/*
+	 * The SuperIO registers use sane addressing techniques...
+	 */
+	if (SUPERIO_PORT(port))
+		__raw_writeb(val, (void __iomem *)ISAIO_BASE + (port << 2));
+	else {
+		void __iomem *a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1);
+
+		/*
+		 * Shame nothing else does
+		 */
+		if (port & 1)
+			__raw_writel(val, a);
+		else
+			__raw_writeb(val, a);
+	}
+}
+
+void __outb16(u8 val, unsigned int port)
+{
+	unsigned int offset;
+
+	/*
+	 * The SuperIO registers use sane addressing techniques...
+	 */
+	if (SUPERIO_PORT(port))
+		offset = port << 2;
+	else
+		offset = (port & ~1) << 1 | (port & 1);
+
+	__raw_writeb(val, (void __iomem *)ISAIO_BASE + offset);
+}
+
+void __outw(u16 val, unsigned int port)
+{
+	unsigned int offset;
+
+	/*
+	 * The SuperIO registers use sane addressing techniques...
+	 */
+	if (SUPERIO_PORT(port))
+		offset = port << 2;
+	else {
+		offset = port << 1;
+		BUG_ON(port & 1);
+	}
+	__raw_writew(val, (void __iomem *)ISAIO_BASE + offset);
+}
+
+void __outl(u32 val, unsigned int port)
+{
+	BUG();
+}
+
+EXPORT_SYMBOL(__outb8);
+EXPORT_SYMBOL(__outb16);
+EXPORT_SYMBOL(__outw);
+EXPORT_SYMBOL(__outl);
+
+void outsb(unsigned int port, const void *from, int len)
+{
+	u32 off;
+
+	if (SUPERIO_PORT(port))
+		off = port << 2;
+	else {
+		off = (port & ~1) << 1;
+		if (port & 1)
+			BUG();
+	}
+
+	__raw_writesb((void __iomem *)ISAIO_BASE + off, from, len);
+}
+
+void insb(unsigned int port, void *from, int len)
+{
+	u32 off;
+
+	if (SUPERIO_PORT(port))
+		off = port << 2;
+	else {
+		off = (port & ~1) << 1;
+		if (port & 1)
+			BUG();
+	}
+
+	__raw_readsb((void __iomem *)ISAIO_BASE + off, from, len);
+}
+
+EXPORT_SYMBOL(outsb);
+EXPORT_SYMBOL(insb);
+
+void outsw(unsigned int port, const void *from, int len)
+{
+	u32 off;
+
+	if (SUPERIO_PORT(port))
+		off = port << 2;
+	else {
+		off = (port & ~1) << 1;
+		if (port & 1)
+			BUG();
+	}
+
+	__raw_writesw((void __iomem *)ISAIO_BASE + off, from, len);
+}
+
+void insw(unsigned int port, void *from, int len)
+{
+	u32 off;
+
+	if (SUPERIO_PORT(port))
+		off = port << 2;
+	else {
+		off = (port & ~1) << 1;
+		if (port & 1)
+			BUG();
+	}
+
+	__raw_readsw((void __iomem *)ISAIO_BASE + off, from, len);
+}
+
+EXPORT_SYMBOL(outsw);
+EXPORT_SYMBOL(insw);
+
+/*
+ * We implement these as 16-bit insw/outsw, mainly for
+ * 3c589 cards.
+ */
+void outsl(unsigned int port, const void *from, int len)
+{
+	u32 off = port << 1;
+
+	if (SUPERIO_PORT(port) || port & 3)
+		BUG();
+
+	__raw_writesw((void __iomem *)ISAIO_BASE + off, from, len << 1);
+}
+
+void insl(unsigned int port, void *from, int len)
+{
+	u32 off = port << 1;
+
+	if (SUPERIO_PORT(port) || port & 3)
+		BUG();
+
+	__raw_readsw((void __iomem *)ISAIO_BASE + off, from, len << 1);
+}
+
+EXPORT_SYMBOL(outsl);
+EXPORT_SYMBOL(insl);