diff options
| author | Martin Michlmayr <tbm@cyrius.com> | 2010-12-06 21:53:16 +0000 |
|---|---|---|
| committer | Nicolas Pitre <nico@fluxnic.net> | 2010-12-07 13:50:14 -0500 |
| commit | ce56d169976488e888878eed5f1bc304cf116c43 (patch) | |
| tree | e1952b4201074ce6eb66c911a430bfd11c256642 /arch/arm/mach-kirkwood/ts219-setup.c | |
| parent | 4bba1c34e0a70d0db2506e1b68f69d7edc8afd78 (diff) | |
| download | linux-ce56d169976488e888878eed5f1bc304cf116c43.tar.gz linux-ce56d169976488e888878eed5f1bc304cf116c43.tar.bz2 linux-ce56d169976488e888878eed5f1bc304cf116c43.zip | |
Kirkwood: Add support for 6282 based QNAP devices
Add support for the QNAP NAS devices based on Marvell's 6282 Kirkwood
chip (TS-119P+, TS-219P+ and TS-419P+). The differences to the 6281
based devices are:
- Ethernet PHY address
- GPIOs used for buttons (TS-119P+/TS-219P+)
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Acked-by: Saeed Bishara <saeed.bishara@gmail.com>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Diffstat (limited to 'arch/arm/mach-kirkwood/ts219-setup.c')
| -rw-r--r-- | arch/arm/mach-kirkwood/ts219-setup.c | 16 |
1 files changed, 14 insertions, 2 deletions
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index 6710bd7773b8..dc999c4c5806 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -80,15 +80,19 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = { MPP11_UART0_RXD, MPP13_UART1_TXD, /* PIC controller */ MPP14_UART1_RXD, /* PIC controller */ - MPP15_GPIO, /* USB Copy button */ - MPP16_GPIO, /* Reset button */ + MPP15_GPIO, /* USB Copy button (on devices with 88F6281) */ + MPP16_GPIO, /* Reset button (on devices with 88F6281) */ MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */ + MPP37_GPIO, /* Reset button (on devices with 88F6282) */ + MPP43_GPIO, /* USB Copy button (on devices with 88F6282) */ MPP44_GPIO, /* Board ID: 0: TS-11x, 1: TS-21x */ 0 }; static void __init qnap_ts219_init(void) { + u32 dev, rev; + /* * Basic setup. Needs to be called early. */ @@ -100,6 +104,14 @@ static void __init qnap_ts219_init(void) qnap_tsx1x_register_flash(); kirkwood_i2c_init(); i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1); + + kirkwood_pcie_id(&dev, &rev); + if (dev == MV88F6282_DEV_ID) { + qnap_ts219_buttons[0].gpio = 43; /* USB Copy button */ + qnap_ts219_buttons[1].gpio = 37; /* Reset button */ + qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); + } + kirkwood_ge00_init(&qnap_ts219_ge00_data); kirkwood_sata_init(&qnap_ts219_sata_data); kirkwood_ehci_init(); |