summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/cpuidle34xx.c
diff options
context:
space:
mode:
authorPaul Walmsley <paul@pwsan.com>2013-01-26 00:58:13 -0700
committerPaul Walmsley <paul@pwsan.com>2013-01-29 14:59:56 -0700
commit1cd96478cf1505a32861ffed8d8f1189d1b1b8ab (patch)
treed65ebdd4a5be3d688147b6acf3a2777fc31c9f13 /arch/arm/mach-omap2/cpuidle34xx.c
parentfd6b42a5614077b04ce8f34fbbcf16864723f5df (diff)
downloadlinux-1cd96478cf1505a32861ffed8d8f1189d1b1b8ab.tar.gz
linux-1cd96478cf1505a32861ffed8d8f1189d1b1b8ab.tar.bz2
linux-1cd96478cf1505a32861ffed8d8f1189d1b1b8ab.zip
ARM: OMAP3xxx: CPUIdle: optimize __omap3_enter_idle()
Avoid programming the MPU and CORE powerdomain next-power-state registers if those powerdomains will never enter low-power states (e.g., the state that people refer to as "C1"). To avoid making assumptions about CPUIdle states based on their order in the list, use a flag to mark CPUIdle states that don't enter powerdomain low-power states. Avoid a previous-power-state register read on the MPU powerdomain unless we know that the MPU was supposed to go OFF during the last state transition. Previous-power-state register reads can be very expensive, so it's worth avoiding these when possible. Since the CORE_L3 clockdomain can't go inactive unless the MPU is active, there's little point blocking autoidle on the CORE_L3 clockdomain in "C1" state, since we've programmed the MPU clockdomain to stay active. Remove the unnecessary code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
Diffstat (limited to 'arch/arm/mach-omap2/cpuidle34xx.c')
-rw-r--r--arch/arm/mach-omap2/cpuidle34xx.c35
1 files changed, 22 insertions, 13 deletions
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index cba69455647a..80392fca86c6 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -39,11 +39,23 @@ struct omap3_idle_statedata {
u8 mpu_state;
u8 core_state;
u8 per_min_state;
+ u8 flags;
};
static struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd;
/*
+ * Possible flag bits for struct omap3_idle_statedata.flags:
+ *
+ * OMAP_CPUIDLE_CX_NO_CLKDM_IDLE: don't allow the MPU clockdomain to go
+ * inactive. This in turn prevents the MPU DPLL from entering autoidle
+ * mode, so wakeup latency is greatly reduced, at the cost of additional
+ * energy consumption. This also prevents the CORE clockdomain from
+ * entering idle.
+ */
+#define OMAP_CPUIDLE_CX_NO_CLKDM_IDLE BIT(0)
+
+/*
* Prevent PER OFF if CORE is not in RETention or OFF as this would
* disable PER wakeups completely.
*/
@@ -53,6 +65,7 @@ static struct omap3_idle_statedata omap3_idle_data[] = {
.core_state = PWRDM_POWER_ON,
/* In C1 do not allow PER state lower than CORE state */
.per_min_state = PWRDM_POWER_ON,
+ .flags = OMAP_CPUIDLE_CX_NO_CLKDM_IDLE,
},
{
.mpu_state = PWRDM_POWER_ON,
@@ -93,27 +106,25 @@ static int __omap3_enter_idle(struct cpuidle_device *dev,
int index)
{
struct omap3_idle_statedata *cx = &omap3_idle_data[index];
- u32 mpu_state = cx->mpu_state, core_state = cx->core_state;
local_fiq_disable();
- pwrdm_set_next_pwrst(mpu_pd, mpu_state);
- pwrdm_set_next_pwrst(core_pd, core_state);
-
if (omap_irq_pending() || need_resched())
goto return_sleep_time;
/* Deny idle for C1 */
- if (index == 0) {
+ if (cx->flags & OMAP_CPUIDLE_CX_NO_CLKDM_IDLE) {
clkdm_deny_idle(mpu_pd->pwrdm_clkdms[0]);
- clkdm_deny_idle(core_pd->pwrdm_clkdms[0]);
+ } else {
+ pwrdm_set_next_pwrst(mpu_pd, cx->mpu_state);
+ pwrdm_set_next_pwrst(core_pd, cx->core_state);
}
/*
* Call idle CPU PM enter notifier chain so that
* VFP context is saved.
*/
- if (mpu_state == PWRDM_POWER_OFF)
+ if (cx->mpu_state == PWRDM_POWER_OFF)
cpu_pm_enter();
/* Execute ARM wfi */
@@ -123,17 +134,15 @@ static int __omap3_enter_idle(struct cpuidle_device *dev,
* Call idle CPU PM enter notifier chain to restore
* VFP context.
*/
- if (pwrdm_read_prev_pwrst(mpu_pd) == PWRDM_POWER_OFF)
+ if (cx->mpu_state == PWRDM_POWER_OFF &&
+ pwrdm_read_prev_pwrst(mpu_pd) == PWRDM_POWER_OFF)
cpu_pm_exit();
/* Re-allow idle for C1 */
- if (index == 0) {
+ if (cx->flags & OMAP_CPUIDLE_CX_NO_CLKDM_IDLE)
clkdm_allow_idle(mpu_pd->pwrdm_clkdms[0]);
- clkdm_allow_idle(core_pd->pwrdm_clkdms[0]);
- }
return_sleep_time:
-
local_fiq_enable();
return index;
@@ -198,7 +207,7 @@ static int next_valid_state(struct cpuidle_device *dev,
* Start search from the next (lower) state.
*/
for (idx = index - 1; idx >= 0; idx--) {
- cx = &omap3_idle_data[idx];
+ cx = &omap3_idle_data[idx];
if ((cx->mpu_state >= mpu_deepest_state) &&
(cx->core_state >= core_deepest_state)) {
next_index = idx;