OMAP3 clock: move OMAP3-specific DPLL functions to dpll3xxx.c

Mark the OMAP3-specific DPLL functions as being OMAP3-specific by moving
them from mach-omap2/dpll.c to mach-omap2/dpll3xxx.c.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>

1 files changed, 0 insertions, 538 deletions

diff --git a/arch/arm/mach-omap2/dpll.c b/arch/arm/mach-omap2/dpll.c
deleted file mode 100644
index f6055b493294..000000000000
--- a/arch/arm/mach-omap2/dpll.c
+++ /dev/null
@@ -1,538 +0,0 @@
-/*
- * OMAP3/4 - specific DPLL control functions
- *
- * Copyright (C) 2009 Texas Instruments, Inc.
- * Copyright (C) 2009 Nokia Corporation
- *
- * Written by Paul Walmsley
- * Testing and integration fixes by Jouni Högander
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/limits.h>
-#include <linux/bitops.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/sram.h>
-#include <asm/div64.h>
-#include <asm/clkdev.h>
-
-#include "clock.h"
-#include "prm.h"
-#include "prm-regbits-34xx.h"
-#include "cm.h"
-#include "cm-regbits-34xx.h"
-
-/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
-#define DPLL_AUTOIDLE_DISABLE			0x0
-#define DPLL_AUTOIDLE_LOW_POWER_STOP		0x1
-
-#define MAX_DPLL_WAIT_TRIES		1000000
-
-
-/**
- * omap3_dpll_recalc - recalculate DPLL rate
- * @clk: DPLL struct clk
- *
- * Recalculate and propagate the DPLL rate.
- */
-unsigned long omap3_dpll_recalc(struct clk *clk)
-{
-	return omap2_get_dpll_rate(clk);
-}
-
-/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
-static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits)
-{
-	const struct dpll_data *dd;
-	u32 v;
-
-	dd = clk->dpll_data;
-
-	v = __raw_readl(dd->control_reg);
-	v &= ~dd->enable_mask;
-	v |= clken_bits << __ffs(dd->enable_mask);
-	__raw_writel(v, dd->control_reg);
-}
-
-/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
-static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
-{
-	const struct dpll_data *dd;
-	int i = 0;
-	int ret = -EINVAL;
-
-	dd = clk->dpll_data;
-
-	state <<= __ffs(dd->idlest_mask);
-
-	while (((__raw_readl(dd->idlest_reg) & dd->idlest_mask) != state) &&
-	       i < MAX_DPLL_WAIT_TRIES) {
-		i++;
-		udelay(1);
-	}
-
-	if (i == MAX_DPLL_WAIT_TRIES) {
-		printk(KERN_ERR "clock: %s failed transition to '%s'\n",
-		       clk->name, (state) ? "locked" : "bypassed");
-	} else {
-		pr_debug("clock: %s transition to '%s' in %d loops\n",
-			 clk->name, (state) ? "locked" : "bypassed", i);
-
-		ret = 0;
-	}
-
-	return ret;
-}
-
-/* From 3430 TRM ES2 4.7.6.2 */
-static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
-{
-	unsigned long fint;
-	u16 f = 0;
-
-	fint = clk->dpll_data->clk_ref->rate / n;
-
-	pr_debug("clock: fint is %lu\n", fint);
-
-	if (fint >= 750000 && fint <= 1000000)
-		f = 0x3;
-	else if (fint > 1000000 && fint <= 1250000)
-		f = 0x4;
-	else if (fint > 1250000 && fint <= 1500000)
-		f = 0x5;
-	else if (fint > 1500000 && fint <= 1750000)
-		f = 0x6;
-	else if (fint > 1750000 && fint <= 2100000)
-		f = 0x7;
-	else if (fint > 7500000 && fint <= 10000000)
-		f = 0xB;
-	else if (fint > 10000000 && fint <= 12500000)
-		f = 0xC;
-	else if (fint > 12500000 && fint <= 15000000)
-		f = 0xD;
-	else if (fint > 15000000 && fint <= 17500000)
-		f = 0xE;
-	else if (fint > 17500000 && fint <= 21000000)
-		f = 0xF;
-	else
-		pr_debug("clock: unknown freqsel setting for %d\n", n);
-
-	return f;
-}
-
-/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
-
-/*
- * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to lock.  Waits for the DPLL to report
- * readiness before returning.  Will save and restore the DPLL's
- * autoidle state across the enable, per the CDP code.  If the DPLL
- * locked successfully, return 0; if the DPLL did not lock in the time
- * allotted, or DPLL3 was passed in, return -EINVAL.
- */
-static int _omap3_noncore_dpll_lock(struct clk *clk)
-{
-	u8 ai;
-	int r;
-
-	pr_debug("clock: locking DPLL %s\n", clk->name);
-
-	ai = omap3_dpll_autoidle_read(clk);
-
-	omap3_dpll_deny_idle(clk);
-
-	_omap3_dpll_write_clken(clk, DPLL_LOCKED);
-
-	r = _omap3_wait_dpll_status(clk, 1);
-
-	if (ai)
-		omap3_dpll_allow_idle(clk);
-
-	return r;
-}
-
-/*
- * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enter low-power bypass mode.  In
- * bypass mode, the DPLL's rate is set equal to its parent clock's
- * rate.  Waits for the DPLL to report readiness before returning.
- * Will save and restore the DPLL's autoidle state across the enable,
- * per the CDP code.  If the DPLL entered bypass mode successfully,
- * return 0; if the DPLL did not enter bypass in the time allotted, or
- * DPLL3 was passed in, or the DPLL does not support low-power bypass,
- * return -EINVAL.
- */
-static int _omap3_noncore_dpll_bypass(struct clk *clk)
-{
-	int r;
-	u8 ai;
-
-	if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS)))
-		return -EINVAL;
-
-	pr_debug("clock: configuring DPLL %s for low-power bypass\n",
-		 clk->name);
-
-	ai = omap3_dpll_autoidle_read(clk);
-
-	_omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS);
-
-	r = _omap3_wait_dpll_status(clk, 0);
-
-	if (ai)
-		omap3_dpll_allow_idle(clk);
-	else
-		omap3_dpll_deny_idle(clk);
-
-	return r;
-}
-
-/*
- * _omap3_noncore_dpll_stop - instruct a DPLL to stop
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enter low-power stop. Will save and
- * restore the DPLL's autoidle state across the stop, per the CDP
- * code.  If DPLL3 was passed in, or the DPLL does not support
- * low-power stop, return -EINVAL; otherwise, return 0.
- */
-static int _omap3_noncore_dpll_stop(struct clk *clk)
-{
-	u8 ai;
-
-	if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
-		return -EINVAL;
-
-	pr_debug("clock: stopping DPLL %s\n", clk->name);
-
-	ai = omap3_dpll_autoidle_read(clk);
-
-	_omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP);
-
-	if (ai)
-		omap3_dpll_allow_idle(clk);
-	else
-		omap3_dpll_deny_idle(clk);
-
-	return 0;
-}
-
-/**
- * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
- * The choice of modes depends on the DPLL's programmed rate: if it is
- * the same as the DPLL's parent clock, it will enter bypass;
- * otherwise, it will enter lock.  This code will wait for the DPLL to
- * indicate readiness before returning, unless the DPLL takes too long
- * to enter the target state.  Intended to be used as the struct clk's
- * enable function.  If DPLL3 was passed in, or the DPLL does not
- * support low-power stop, or if the DPLL took too long to enter
- * bypass or lock, return -EINVAL; otherwise, return 0.
- */
-int omap3_noncore_dpll_enable(struct clk *clk)
-{
-	int r;
-	struct dpll_data *dd;
-
-	dd = clk->dpll_data;
-	if (!dd)
-		return -EINVAL;
-
-	if (clk->rate == dd->clk_bypass->rate) {
-		WARN_ON(clk->parent != dd->clk_bypass);
-		r = _omap3_noncore_dpll_bypass(clk);
-	} else {
-		WARN_ON(clk->parent != dd->clk_ref);
-		r = _omap3_noncore_dpll_lock(clk);
-	}
-	/*
-	 *FIXME: this is dubious - if clk->rate has changed, what about
-	 * propagating?
-	 */
-	if (!r)
-		clk->rate = omap2_get_dpll_rate(clk);
-
-	return r;
-}
-
-/**
- * omap3_noncore_dpll_disable - instruct a DPLL to enter low-power stop
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enter low-power stop.  This function is
- * intended for use in struct clkops.  No return value.
- */
-void omap3_noncore_dpll_disable(struct clk *clk)
-{
-	_omap3_noncore_dpll_stop(clk);
-}
-
-
-/* Non-CORE DPLL rate set code */
-
-/*
- * omap3_noncore_dpll_program - set non-core DPLL M,N values directly
- * @clk: struct clk * of DPLL to set
- * @m: DPLL multiplier to set
- * @n: DPLL divider to set
- * @freqsel: FREQSEL value to set
- *
- * Program the DPLL with the supplied M, N values, and wait for the DPLL to
- * lock..  Returns -EINVAL upon error, or 0 upon success.
- */
-int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
-{
-	struct dpll_data *dd = clk->dpll_data;
-	u32 v;
-
-	/* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
-	_omap3_noncore_dpll_bypass(clk);
-
-	/* Set jitter correction */
-	if (!cpu_is_omap44xx()) {
-		v = __raw_readl(dd->control_reg);
-		v &= ~dd->freqsel_mask;
-		v |= freqsel << __ffs(dd->freqsel_mask);
-		__raw_writel(v, dd->control_reg);
-	}
-
-	/* Set DPLL multiplier, divider */
-	v = __raw_readl(dd->mult_div1_reg);
-	v &= ~(dd->mult_mask | dd->div1_mask);
-	v |= m << __ffs(dd->mult_mask);
-	v |= (n - 1) << __ffs(dd->div1_mask);
-	__raw_writel(v, dd->mult_div1_reg);
-
-	/* We let the clock framework set the other output dividers later */
-
-	/* REVISIT: Set ramp-up delay? */
-
-	_omap3_noncore_dpll_lock(clk);
-
-	return 0;
-}
-
-/**
- * omap3_noncore_dpll_set_rate - set non-core DPLL rate
- * @clk: struct clk * of DPLL to set
- * @rate: rounded target rate
- *
- * Set the DPLL CLKOUT to the target rate.  If the DPLL can enter
- * low-power bypass, and the target rate is the bypass source clock
- * rate, then configure the DPLL for bypass.  Otherwise, round the
- * target rate if it hasn't been done already, then program and lock
- * the DPLL.  Returns -EINVAL upon error, or 0 upon success.
- */
-int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
-{
-	struct clk *new_parent = NULL;
-	u16 freqsel = 0;
-	struct dpll_data *dd;
-	int ret;
-
-	if (!clk || !rate)
-		return -EINVAL;
-
-	dd = clk->dpll_data;
-	if (!dd)
-		return -EINVAL;
-
-	if (rate == omap2_get_dpll_rate(clk))
-		return 0;
-
-	/*
-	 * Ensure both the bypass and ref clocks are enabled prior to
-	 * doing anything; we need the bypass clock running to reprogram
-	 * the DPLL.
-	 */
-	omap2_clk_enable(dd->clk_bypass);
-	omap2_clk_enable(dd->clk_ref);
-
-	if (dd->clk_bypass->rate == rate &&
-	    (clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
-		pr_debug("clock: %s: set rate: entering bypass.\n", clk->name);
-
-		ret = _omap3_noncore_dpll_bypass(clk);
-		if (!ret)
-			new_parent = dd->clk_bypass;
-	} else {
-		if (dd->last_rounded_rate != rate)
-			omap2_dpll_round_rate(clk, rate);
-
-		if (dd->last_rounded_rate == 0)
-			return -EINVAL;
-
-		/* No freqsel on OMAP4 */
-		if (!cpu_is_omap44xx()) {
-			freqsel = _omap3_dpll_compute_freqsel(clk,
-						dd->last_rounded_n);
-			if (!freqsel)
-				WARN_ON(1);
-		}
-
-		pr_debug("clock: %s: set rate: locking rate to %lu.\n",
-			 clk->name, rate);
-
-		ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m,
-						 dd->last_rounded_n, freqsel);
-		if (!ret)
-			new_parent = dd->clk_ref;
-	}
-	if (!ret) {
-		/*
-		 * Switch the parent clock in the heirarchy, and make sure
-		 * that the new parent's usecount is correct.  Note: we
-		 * enable the new parent before disabling the old to avoid
-		 * any unnecessary hardware disable->enable transitions.
-		 */
-		if (clk->usecount) {
-			omap2_clk_enable(new_parent);
-			omap2_clk_disable(clk->parent);
-		}
-		clk_reparent(clk, new_parent);
-		clk->rate = rate;
-	}
-	omap2_clk_disable(dd->clk_ref);
-	omap2_clk_disable(dd->clk_bypass);
-
-	return 0;
-}
-
-/* DPLL autoidle read/set code */
-
-/**
- * omap3_dpll_autoidle_read - read a DPLL's autoidle bits
- * @clk: struct clk * of the DPLL to read
- *
- * Return the DPLL's autoidle bits, shifted down to bit 0.  Returns
- * -EINVAL if passed a null pointer or if the struct clk does not
- * appear to refer to a DPLL.
- */
-u32 omap3_dpll_autoidle_read(struct clk *clk)
-{
-	const struct dpll_data *dd;
-	u32 v;
-
-	if (!clk || !clk->dpll_data)
-		return -EINVAL;
-
-	dd = clk->dpll_data;
-
-	v = __raw_readl(dd->autoidle_reg);
-	v &= dd->autoidle_mask;
-	v >>= __ffs(dd->autoidle_mask);
-
-	return v;
-}
-
-/**
- * omap3_dpll_allow_idle - enable DPLL autoidle bits
- * @clk: struct clk * of the DPLL to operate on
- *
- * Enable DPLL automatic idle control.  This automatic idle mode
- * switching takes effect only when the DPLL is locked, at least on
- * OMAP3430.  The DPLL will enter low-power stop when its downstream
- * clocks are gated.  No return value.
- */
-void omap3_dpll_allow_idle(struct clk *clk)
-{
-	const struct dpll_data *dd;
-	u32 v;
-
-	if (!clk || !clk->dpll_data)
-		return;
-
-	dd = clk->dpll_data;
-
-	/*
-	 * REVISIT: CORE DPLL can optionally enter low-power bypass
-	 * by writing 0x5 instead of 0x1.  Add some mechanism to
-	 * optionally enter this mode.
-	 */
-	v = __raw_readl(dd->autoidle_reg);
-	v &= ~dd->autoidle_mask;
-	v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
-	__raw_writel(v, dd->autoidle_reg);
-}
-
-/**
- * omap3_dpll_deny_idle - prevent DPLL from automatically idling
- * @clk: struct clk * of the DPLL to operate on
- *
- * Disable DPLL automatic idle control.  No return value.
- */
-void omap3_dpll_deny_idle(struct clk *clk)
-{
-	const struct dpll_data *dd;
-	u32 v;
-
-	if (!clk || !clk->dpll_data)
-		return;
-
-	dd = clk->dpll_data;
-
-	v = __raw_readl(dd->autoidle_reg);
-	v &= ~dd->autoidle_mask;
-	v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
-	__raw_writel(v, dd->autoidle_reg);
-
-}
-
-/* Clock control for DPLL outputs */
-
-/**
- * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
- * @clk: DPLL output struct clk
- *
- * Using parent clock DPLL data, look up DPLL state.  If locked, set our
- * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
- */
-unsigned long omap3_clkoutx2_recalc(struct clk *clk)
-{
-	const struct dpll_data *dd;
-	unsigned long rate;
-	u32 v;
-	struct clk *pclk;
-
-	/* Walk up the parents of clk, looking for a DPLL */
-	pclk = clk->parent;
-	while (pclk && !pclk->dpll_data)
-		pclk = pclk->parent;
-
-	/* clk does not have a DPLL as a parent? */
-	WARN_ON(!pclk);
-
-	dd = pclk->dpll_data;
-
-	WARN_ON(!dd->enable_mask);
-
-	v = __raw_readl(dd->control_reg) & dd->enable_mask;
-	v >>= __ffs(dd->enable_mask);
-	if (v != OMAP3XXX_EN_DPLL_LOCKED)
-		rate = clk->parent->rate;
-	else
-		rate = clk->parent->rate * 2;
-	return rate;
-}