ARM: mach-pnx4008: Remove architecture

This patch removes the ARM architecture mach-pnx4008. No direct support or user
feedback since 2006. Acknowledgements from NXP/Philips and Linux arm-soc
maintainers.

Signed-off-by: Roland Stigge <stigge@antcom.de>

27 files changed, 0 insertions, 4686 deletions

diff --git a/arch/arm/mach-pnx4008/Makefile b/arch/arm/mach-pnx4008/Makefile
deleted file mode 100644
index 777564c90a12..000000000000
--- a/arch/arm/mach-pnx4008/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-y			:= core.o irq.o time.o clock.o gpio.o serial.o dma.o i2c.o
-obj-m			:=
-obj-n			:=
-obj-			:=
-
-# Power Management
-obj-$(CONFIG_PM) += pm.o sleep.o
-
diff --git a/arch/arm/mach-pnx4008/Makefile.boot b/arch/arm/mach-pnx4008/Makefile.boot
deleted file mode 100644
index 9fa19baa7f2e..000000000000
--- a/arch/arm/mach-pnx4008/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-   zreladdr-y		+= 0x80008000
-params_phys-y		:= 0x80000100
-initrd_phys-y		:= 0x80800000
-
diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c
deleted file mode 100644
index a4a3819c96cb..000000000000
--- a/arch/arm/mach-pnx4008/clock.c
+++ /dev/null
@@ -1,1001 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/clock.c
- *
- * Clock control driver for PNX4008
- *
- * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
- * Generic clock management functions are partially based on:
- *  linux/arch/arm/mach-omap/clock.c
- *
- * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-
-#include <mach/hardware.h>
-#include <mach/clock.h>
-#include "clock.h"
-
-/*forward declaration*/
-static struct clk per_ck;
-static struct clk hclk_ck;
-static struct clk ck_1MHz;
-static struct clk ck_13MHz;
-static struct clk ck_pll1;
-static int local_set_rate(struct clk *clk, u32 rate);
-
-static inline void clock_lock(void)
-{
-	local_irq_disable();
-}
-
-static inline void clock_unlock(void)
-{
-	local_irq_enable();
-}
-
-static void propagate_rate(struct clk *clk)
-{
-	struct clk *tmp_clk;
-
-	tmp_clk = clk;
-	while (tmp_clk->propagate_next) {
-		tmp_clk = tmp_clk->propagate_next;
-		local_set_rate(tmp_clk, tmp_clk->user_rate);
-	}
-}
-
-static void clk_reg_disable(struct clk *clk)
-{
-	if (clk->enable_reg)
-		__raw_writel(__raw_readl(clk->enable_reg) &
-			     ~(1 << clk->enable_shift), clk->enable_reg);
-}
-
-static int clk_reg_enable(struct clk *clk)
-{
-	if (clk->enable_reg)
-		__raw_writel(__raw_readl(clk->enable_reg) |
-			     (1 << clk->enable_shift), clk->enable_reg);
-	return 0;
-}
-
-static inline void clk_reg_disable1(struct clk *clk)
-{
-	if (clk->enable_reg1)
-		__raw_writel(__raw_readl(clk->enable_reg1) &
-			     ~(1 << clk->enable_shift1), clk->enable_reg1);
-}
-
-static inline void clk_reg_enable1(struct clk *clk)
-{
-	if (clk->enable_reg1)
-		__raw_writel(__raw_readl(clk->enable_reg1) |
-			     (1 << clk->enable_shift1), clk->enable_reg1);
-}
-
-static int clk_wait_for_pll_lock(struct clk *clk)
-{
-	int i;
-	i = 0;
-	while (i++ < 0xFFF && !(__raw_readl(clk->scale_reg) & 1)) ;	/*wait for PLL to lock */
-
-	if (!(__raw_readl(clk->scale_reg) & 1)) {
-		printk(KERN_ERR
-		       "%s ERROR: failed to lock, scale reg data: %x\n",
-		       clk->name, __raw_readl(clk->scale_reg));
-		return -1;
-	}
-	return 0;
-}
-
-static int switch_to_dirty_13mhz(struct clk *clk)
-{
-	int i;
-	int ret;
-	u32 tmp_reg;
-
-	ret = 0;
-
-	if (!clk->rate)
-		clk_reg_enable1(clk);
-
-	tmp_reg = __raw_readl(clk->parent_switch_reg);
-	/*if 13Mhz clock selected, select 13'MHz (dirty) source from OSC */
-	if (!(tmp_reg & 1)) {
-		tmp_reg |= (1 << 1);	/* Trigger switch to 13'MHz (dirty) clock */
-		__raw_writel(tmp_reg, clk->parent_switch_reg);
-		i = 0;
-		while (i++ < 0xFFF && !(__raw_readl(clk->parent_switch_reg) & 1)) ;	/*wait for 13'MHz selection status */
-
-		if (!(__raw_readl(clk->parent_switch_reg) & 1)) {
-			printk(KERN_ERR
-			       "%s ERROR: failed to select 13'MHz, parent sw reg data: %x\n",
-			       clk->name, __raw_readl(clk->parent_switch_reg));
-			ret = -1;
-		}
-	}
-
-	if (!clk->rate)
-		clk_reg_disable1(clk);
-
-	return ret;
-}
-
-static int switch_to_clean_13mhz(struct clk *clk)
-{
-	int i;
-	int ret;
-	u32 tmp_reg;
-
-	ret = 0;
-
-	if (!clk->rate)
-		clk_reg_enable1(clk);
-
-	tmp_reg = __raw_readl(clk->parent_switch_reg);
-	/*if 13'Mhz clock selected, select 13MHz (clean) source from OSC */
-	if (tmp_reg & 1) {
-		tmp_reg &= ~(1 << 1);	/* Trigger switch to 13MHz (clean) clock */
-		__raw_writel(tmp_reg, clk->parent_switch_reg);
-		i = 0;
-		while (i++ < 0xFFF && (__raw_readl(clk->parent_switch_reg) & 1)) ;	/*wait for 13MHz selection status */
-
-		if (__raw_readl(clk->parent_switch_reg) & 1) {
-			printk(KERN_ERR
-			       "%s ERROR: failed to select 13MHz, parent sw reg data: %x\n",
-			       clk->name, __raw_readl(clk->parent_switch_reg));
-			ret = -1;
-		}
-	}
-
-	if (!clk->rate)
-		clk_reg_disable1(clk);
-
-	return ret;
-}
-
-static int set_13MHz_parent(struct clk *clk, struct clk *parent)
-{
-	int ret = -EINVAL;
-
-	if (parent == &ck_13MHz)
-		ret = switch_to_clean_13mhz(clk);
-	else if (parent == &ck_pll1)
-		ret = switch_to_dirty_13mhz(clk);
-
-	return ret;
-}
-
-#define PLL160_MIN_FCCO 156000
-#define PLL160_MAX_FCCO 320000
-
-/*
- * Calculate pll160 settings.
- * Possible input: up to 320MHz with step of clk->parent->rate.
- * In PNX4008 parent rate for pll160s may be either 1 or 13MHz.
- * Ignored paths: "feedback" (bit 13 set), "div-by-N".
- * Setting ARM PLL4 rate to 0 will put CPU into direct run mode.
- * Setting PLL5 and PLL3 rate to 0 will disable USB and DSP clock input.
- * Please refer to PNX4008 IC manual for details.
- */
-
-static int pll160_set_rate(struct clk *clk, u32 rate)
-{
-	u32 tmp_reg, tmp_m, tmp_2p, i;
-	u32 parent_rate;
-	int ret = -EINVAL;
-
-	parent_rate = clk->parent->rate;
-
-	if (!parent_rate)
-		goto out;
-
-	/* set direct run for ARM or disable output for others  */
-	clk_reg_disable(clk);
-
-	/* disable source input as well (ignored for ARM) */
-	clk_reg_disable1(clk);
-
-	tmp_reg = __raw_readl(clk->scale_reg);
-	tmp_reg &= ~0x1ffff;	/*clear all settings, power down */
-	__raw_writel(tmp_reg, clk->scale_reg);
-
-	rate -= rate % parent_rate;	/*round down the input */
-
-	if (rate > PLL160_MAX_FCCO)
-		rate = PLL160_MAX_FCCO;
-
-	if (!rate) {
-		clk->rate = 0;
-		ret = 0;
-		goto out;
-	}
-
-	clk_reg_enable1(clk);
-	tmp_reg = __raw_readl(clk->scale_reg);
-
-	if (rate == parent_rate) {
-		/*enter direct bypass mode */
-		tmp_reg |= ((1 << 14) | (1 << 15));
-		__raw_writel(tmp_reg, clk->scale_reg);
-		clk->rate = parent_rate;
-		clk_reg_enable(clk);
-		ret = 0;
-		goto out;
-	}
-
-	i = 0;
-	for (tmp_2p = 1; tmp_2p < 16; tmp_2p <<= 1) {
-		if (rate * tmp_2p >= PLL160_MIN_FCCO)
-			break;
-		i++;
-	}
-
-	if (tmp_2p > 1)
-		tmp_reg |= ((i - 1) << 11);
-	else
-		tmp_reg |= (1 << 14);	/*direct mode, no divide */
-
-	tmp_m = rate * tmp_2p;
-	tmp_m /= parent_rate;
-
-	tmp_reg |= (tmp_m - 1) << 1;	/*calculate M */
-	tmp_reg |= (1 << 16);	/*power up PLL */
-	__raw_writel(tmp_reg, clk->scale_reg);
-
-	if (clk_wait_for_pll_lock(clk) < 0) {
-		clk_reg_disable(clk);
-		clk_reg_disable1(clk);
-
-		tmp_reg = __raw_readl(clk->scale_reg);
-		tmp_reg &= ~0x1ffff;	/*clear all settings, power down */
-		__raw_writel(tmp_reg, clk->scale_reg);
-		clk->rate = 0;
-		ret = -EFAULT;
-		goto out;
-	}
-
-	clk->rate = (tmp_m * parent_rate) / tmp_2p;
-
-	if (clk->flags & RATE_PROPAGATES)
-		propagate_rate(clk);
-
-	clk_reg_enable(clk);
-	ret = 0;
-
-out:
-	return ret;
-}
-
-/*configure PER_CLK*/
-static int per_clk_set_rate(struct clk *clk, u32 rate)
-{
-	u32 tmp;
-
-	tmp = __raw_readl(clk->scale_reg);
-	tmp &= ~(0x1f << 2);
-	tmp |= ((clk->parent->rate / clk->rate) - 1) << 2;
-	__raw_writel(tmp, clk->scale_reg);
-	clk->rate = rate;
-	return 0;
-}
-
-/*configure HCLK*/
-static int hclk_set_rate(struct clk *clk, u32 rate)
-{
-	u32 tmp;
-	tmp = __raw_readl(clk->scale_reg);
-	tmp = tmp & ~0x3;
-	switch (rate) {
-	case 1:
-		break;
-	case 2:
-		tmp |= 1;
-		break;
-	case 4:
-		tmp |= 2;
-		break;
-	}
-
-	__raw_writel(tmp, clk->scale_reg);
-	clk->rate = rate;
-	return 0;
-}
-
-static u32 hclk_round_rate(struct clk *clk, u32 rate)
-{
-	switch (rate) {
-	case 1:
-	case 4:
-		return rate;
-	}
-	return 2;
-}
-
-static u32 per_clk_round_rate(struct clk *clk, u32 rate)
-{
-	return CLK_RATE_13MHZ;
-}
-
-static int on_off_set_rate(struct clk *clk, u32 rate)
-{
-	if (rate) {
-		clk_reg_enable(clk);
-		clk->rate = 1;
-	} else {
-		clk_reg_disable(clk);
-		clk->rate = 0;
-	}
-	return 0;
-}
-
-static int on_off_inv_set_rate(struct clk *clk, u32 rate)
-{
-	if (rate) {
-		clk_reg_disable(clk);	/*enable bit is inverted */
-		clk->rate = 1;
-	} else {
-		clk_reg_enable(clk);
-		clk->rate = 0;
-	}
-	return 0;
-}
-
-static u32 on_off_round_rate(struct clk *clk, u32 rate)
-{
-	return (rate ? 1 : 0);
-}
-
-static u32 pll4_round_rate(struct clk *clk, u32 rate)
-{
-	if (rate > CLK_RATE_208MHZ)
-		rate = CLK_RATE_208MHZ;
-	if (rate == CLK_RATE_208MHZ && hclk_ck.user_rate == 1)
-		rate = CLK_RATE_208MHZ - CLK_RATE_13MHZ;
-	return (rate - (rate % (hclk_ck.user_rate * CLK_RATE_13MHZ)));
-}
-
-static u32 pll3_round_rate(struct clk *clk, u32 rate)
-{
-	if (rate > CLK_RATE_208MHZ)
-		rate = CLK_RATE_208MHZ;
-	return (rate - rate % CLK_RATE_13MHZ);
-}
-
-static u32 pll5_round_rate(struct clk *clk, u32 rate)
-{
-	return (rate ? CLK_RATE_48MHZ : 0);
-}
-
-static u32 ck_13MHz_round_rate(struct clk *clk, u32 rate)
-{
-	return (rate ? CLK_RATE_13MHZ : 0);
-}
-
-static int ck_13MHz_set_rate(struct clk *clk, u32 rate)
-{
-	if (rate) {
-		clk_reg_disable(clk);	/*enable bit is inverted */
-		udelay(500);
-		clk->rate = CLK_RATE_13MHZ;
-		ck_1MHz.rate = CLK_RATE_1MHZ;
-	} else {
-		clk_reg_enable(clk);
-		clk->rate = 0;
-		ck_1MHz.rate = 0;
-	}
-	return 0;
-}
-
-static int pll1_set_rate(struct clk *clk, u32 rate)
-{
-#if 0 /* doesn't work on some boards, probably a HW BUG */
-	if (rate) {
-		clk_reg_disable(clk);	/*enable bit is inverted */
-		if (!clk_wait_for_pll_lock(clk)) {
-			clk->rate = CLK_RATE_13MHZ;
-		} else {
-			clk_reg_enable(clk);
-			clk->rate = 0;
-		}
-
-	} else {
-		clk_reg_enable(clk);
-		clk->rate = 0;
-	}
-#endif
-	return 0;
-}
-
-/* Clock sources */
-
-static struct clk osc_13MHz = {
-	.name = "osc_13MHz",
-	.flags = FIXED_RATE,
-	.rate = CLK_RATE_13MHZ,
-};
-
-static struct clk ck_13MHz = {
-	.name = "ck_13MHz",
-	.parent = &osc_13MHz,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &ck_13MHz_round_rate,
-	.set_rate = &ck_13MHz_set_rate,
-	.enable_reg = OSC13CTRL_REG,
-	.enable_shift = 0,
-	.rate = CLK_RATE_13MHZ,
-};
-
-static struct clk osc_32KHz = {
-	.name = "osc_32KHz",
-	.flags = FIXED_RATE,
-	.rate = CLK_RATE_32KHZ,
-};
-
-/*attached to PLL5*/
-static struct clk ck_1MHz = {
-	.name = "ck_1MHz",
-	.flags = FIXED_RATE | PARENT_SET_RATE,
-	.parent = &ck_13MHz,
-};
-
-/* PLL1 (397) - provides 13' MHz clock */
-static struct clk ck_pll1 = {
-	.name = "ck_pll1",
-	.parent = &osc_32KHz,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &ck_13MHz_round_rate,
-	.set_rate = &pll1_set_rate,
-	.enable_reg = PLLCTRL_REG,
-	.enable_shift = 1,
-	.scale_reg = PLLCTRL_REG,
-	.rate = CLK_RATE_13MHZ,
-};
-
-/* CPU/Bus PLL */
-static struct clk ck_pll4 = {
-	.name = "ck_pll4",
-	.parent = &ck_pll1,
-	.flags = RATE_PROPAGATES | NEEDS_INITIALIZATION,
-	.propagate_next = &per_ck,
-	.round_rate = &pll4_round_rate,
-	.set_rate = &pll160_set_rate,
-	.rate = CLK_RATE_208MHZ,
-	.scale_reg = HCLKPLLCTRL_REG,
-	.enable_reg = PWRCTRL_REG,
-	.enable_shift = 2,
-	.parent_switch_reg = SYSCLKCTRL_REG,
-	.set_parent = &set_13MHz_parent,
-};
-
-/* USB PLL */
-static struct clk ck_pll5 = {
-	.name = "ck_pll5",
-	.parent = &ck_1MHz,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &pll5_round_rate,
-	.set_rate = &pll160_set_rate,
-	.scale_reg = USBCTRL_REG,
-	.enable_reg = USBCTRL_REG,
-	.enable_shift = 18,
-	.enable_reg1 = USBCTRL_REG,
-	.enable_shift1 = 17,
-};
-
-/* XPERTTeak DSP PLL */
-static struct clk ck_pll3 = {
-	.name = "ck_pll3",
-	.parent = &ck_pll1,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &pll3_round_rate,
-	.set_rate = &pll160_set_rate,
-	.scale_reg = DSPPLLCTRL_REG,
-	.enable_reg = DSPCLKCTRL_REG,
-	.enable_shift = 3,
-	.enable_reg1 = DSPCLKCTRL_REG,
-	.enable_shift1 = 2,
-	.parent_switch_reg = DSPCLKCTRL_REG,
-	.set_parent = &set_13MHz_parent,
-};
-
-static struct clk hclk_ck = {
-	.name = "hclk_ck",
-	.parent = &ck_pll4,
-	.flags = PARENT_SET_RATE,
-	.set_rate = &hclk_set_rate,
-	.round_rate = &hclk_round_rate,
-	.scale_reg = HCLKDIVCTRL_REG,
-	.rate = 2,
-	.user_rate = 2,
-};
-
-static struct clk per_ck = {
-	.name = "per_ck",
-	.parent = &ck_pll4,
-	.flags = FIXED_RATE,
-	.propagate_next = &hclk_ck,
-	.set_rate = &per_clk_set_rate,
-	.round_rate = &per_clk_round_rate,
-	.scale_reg = HCLKDIVCTRL_REG,
-	.rate = CLK_RATE_13MHZ,
-	.user_rate = CLK_RATE_13MHZ,
-};
-
-static struct clk m2hclk_ck = {
-	.name = "m2hclk_ck",
-	.parent = &hclk_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_inv_set_rate,
-	.rate = 1,
-	.enable_shift = 6,
-	.enable_reg = PWRCTRL_REG,
-};
-
-static struct clk vfp9_ck = {
-	.name = "vfp9_ck",
-	.parent = &ck_pll4,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.rate = 1,
-	.enable_shift = 4,
-	.enable_reg = VFP9CLKCTRL_REG,
-};
-
-static struct clk keyscan_ck = {
-	.name = "keyscan_ck",
-	.parent = &osc_32KHz,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 0,
-	.enable_reg = KEYCLKCTRL_REG,
-};
-
-static struct clk touch_ck = {
-	.name = "touch_ck",
-	.parent = &osc_32KHz,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 0,
-	.enable_reg = TSCLKCTRL_REG,
-};
-
-static struct clk pwm1_ck = {
-	.name = "pwm1_ck",
-	.parent = &osc_32KHz,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 0,
-	.enable_reg = PWMCLKCTRL_REG,
-};
-
-static struct clk pwm2_ck = {
-	.name = "pwm2_ck",
-	.parent = &osc_32KHz,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 2,
-	.enable_reg = PWMCLKCTRL_REG,
-};
-
-static struct clk jpeg_ck = {
-	.name = "jpeg_ck",
-	.parent = &hclk_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 0,
-	.enable_reg = JPEGCLKCTRL_REG,
-};
-
-static struct clk ms_ck = {
-	.name = "ms_ck",
-	.parent = &ck_pll4,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 5,
-	.enable_reg = MSCTRL_REG,
-};
-
-static struct clk dum_ck = {
-	.name = "dum_ck",
-	.parent = &hclk_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 0,
-	.enable_reg = DUMCLKCTRL_REG,
-};
-
-static struct clk flash_ck = {
-	.name = "flash_ck",
-	.parent = &hclk_ck,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 1,	/* Only MLC clock supported */
-	.enable_reg = FLASHCLKCTRL_REG,
-};
-
-static struct clk i2c0_ck = {
-	.name = "i2c0_ck",
-	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION | FIXED_RATE,
-	.enable_shift = 0,
-	.enable_reg = I2CCLKCTRL_REG,
-	.rate = 13000000,
-	.enable = clk_reg_enable,
-	.disable = clk_reg_disable,
-};
-
-static struct clk i2c1_ck = {
-	.name = "i2c1_ck",
-	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION | FIXED_RATE,
-	.enable_shift = 1,
-	.enable_reg = I2CCLKCTRL_REG,
-	.rate = 13000000,
-	.enable = clk_reg_enable,
-	.disable = clk_reg_disable,
-};
-
-static struct clk i2c2_ck = {
-	.name = "i2c2_ck",
-	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION | FIXED_RATE,
-	.enable_shift = 2,
-	.enable_reg = USB_OTG_CLKCTRL_REG,
-	.rate = 13000000,
-	.enable = clk_reg_enable,
-	.disable = clk_reg_disable,
-};
-
-static struct clk spi0_ck = {
-	.name = "spi0_ck",
-	.parent = &hclk_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 0,
-	.enable_reg = SPICTRL_REG,
-};
-
-static struct clk spi1_ck = {
-	.name = "spi1_ck",
-	.parent = &hclk_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 4,
-	.enable_reg = SPICTRL_REG,
-};
-
-static struct clk dma_ck = {
-	.name = "dma_ck",
-	.parent = &hclk_ck,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 0,
-	.enable_reg = DMACLKCTRL_REG,
-};
-
-static struct clk uart3_ck = {
-	.name = "uart3_ck",
-	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.rate = 1,
-	.enable_shift = 0,
-	.enable_reg = UARTCLKCTRL_REG,
-};
-
-static struct clk uart4_ck = {
-	.name = "uart4_ck",
-	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 1,
-	.enable_reg = UARTCLKCTRL_REG,
-};
-
-static struct clk uart5_ck = {
-	.name = "uart5_ck",
-	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.rate = 1,
-	.enable_shift = 2,
-	.enable_reg = UARTCLKCTRL_REG,
-};
-
-static struct clk uart6_ck = {
-	.name = "uart6_ck",
-	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
-	.enable_shift = 3,
-	.enable_reg = UARTCLKCTRL_REG,
-};
-
-static struct clk wdt_ck = {
-	.name = "wdt_ck",
-	.parent = &per_ck,
-	.flags = NEEDS_INITIALIZATION,
-	.enable_shift = 0,
-	.enable_reg = TIMCLKCTRL_REG,
-	.enable = clk_reg_enable,
-	.disable = clk_reg_disable,
-};
-
-/* These clocks are visible outside this module
- * and can be initialized
- */
-static struct clk *onchip_clks[] __initdata = {
-	&ck_13MHz,
-	&ck_pll1,
-	&ck_pll4,
-	&ck_pll5,
-	&ck_pll3,
-	&vfp9_ck,
-	&m2hclk_ck,
-	&hclk_ck,
-	&dma_ck,
-	&flash_ck,
-	&dum_ck,
-	&keyscan_ck,
-	&pwm1_ck,
-	&pwm2_ck,
-	&jpeg_ck,
-	&ms_ck,
-	&touch_ck,
-	&i2c0_ck,
-	&i2c1_ck,
-	&i2c2_ck,
-	&spi0_ck,
-	&spi1_ck,
-	&uart3_ck,
-	&uart4_ck,
-	&uart5_ck,
-	&uart6_ck,
-	&wdt_ck,
-};
-
-static struct clk_lookup onchip_clkreg[] = {
-	{ .clk = &ck_13MHz,	.con_id = "ck_13MHz"	},
-	{ .clk = &ck_pll1,	.con_id = "ck_pll1"	},
-	{ .clk = &ck_pll4,	.con_id = "ck_pll4"	},
-	{ .clk = &ck_pll5,	.con_id = "ck_pll5"	},
-	{ .clk = &ck_pll3,	.con_id = "ck_pll3"	},
-	{ .clk = &vfp9_ck,	.con_id = "vfp9_ck"	},
-	{ .clk = &m2hclk_ck,	.con_id = "m2hclk_ck"	},
-	{ .clk = &hclk_ck,	.con_id = "hclk_ck"	},
-	{ .clk = &dma_ck,	.con_id = "dma_ck"	},
-	{ .clk = &flash_ck,	.con_id = "flash_ck"	},
-	{ .clk = &dum_ck,	.con_id = "dum_ck"	},
-	{ .clk = &keyscan_ck,	.con_id = "keyscan_ck"	},
-	{ .clk = &pwm1_ck,	.con_id = "pwm1_ck"	},
-	{ .clk = &pwm2_ck,	.con_id = "pwm2_ck"	},
-	{ .clk = &jpeg_ck,	.con_id = "jpeg_ck"	},
-	{ .clk = &ms_ck,	.con_id = "ms_ck"	},
-	{ .clk = &touch_ck,	.con_id = "touch_ck"	},
-	{ .clk = &i2c0_ck,	.dev_id = "pnx-i2c.0"	},
-	{ .clk = &i2c1_ck,	.dev_id = "pnx-i2c.1"	},
-	{ .clk = &i2c2_ck,	.dev_id = "pnx-i2c.2"	},
-	{ .clk = &spi0_ck,	.con_id = "spi0_ck"	},
-	{ .clk = &spi1_ck,	.con_id = "spi1_ck"	},
-	{ .clk = &uart3_ck,	.con_id = "uart3_ck"	},
-	{ .clk = &uart4_ck,	.con_id = "uart4_ck"	},
-	{ .clk = &uart5_ck,	.con_id = "uart5_ck"	},
-	{ .clk = &uart6_ck,	.con_id = "uart6_ck"	},
-	{ .clk = &wdt_ck,	.dev_id = "pnx4008-watchdog" },
-};
-
-static void local_clk_disable(struct clk *clk)
-{
-	if (WARN_ON(clk->usecount == 0))
-		return;
-
-	if (!(--clk->usecount)) {
-		if (clk->disable)
-			clk->disable(clk);
-		else if (!(clk->flags & FIXED_RATE) && clk->rate && clk->set_rate)
-			clk->set_rate(clk, 0);
-		if (clk->parent)
-			local_clk_disable(clk->parent);
-	}
-}
-
-static int local_clk_enable(struct clk *clk)
-{
-	int ret = 0;
-
-	if (clk->usecount == 0) {
-		if (clk->parent) {
-			ret = local_clk_enable(clk->parent);
-			if (ret != 0)
-				goto out;
-		}
-
-		if (clk->enable)
-			ret = clk->enable(clk);
-		else if (!(clk->flags & FIXED_RATE) && !clk->rate && clk->set_rate
-			    && clk->user_rate)
-			ret = clk->set_rate(clk, clk->user_rate);
-
-		if (ret != 0 && clk->parent) {
-			local_clk_disable(clk->parent);
-			goto out;
-		}
-
-		clk->usecount++;
-	}
-out:
-	return ret;
-}
-
-static int local_set_rate(struct clk *clk, u32 rate)
-{
-	int ret = -EINVAL;
-	if (clk->set_rate) {
-
-		if (clk->user_rate == clk->rate && clk->parent->rate) {
-			/* if clock enabled or rate not set */
-			clk->user_rate = clk->round_rate(clk, rate);
-			ret = clk->set_rate(clk, clk->user_rate);
-		} else
-			clk->user_rate = clk->round_rate(clk, rate);
-		ret = 0;
-	}
-	return ret;
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret = -EINVAL;
-
-	if (clk->flags & FIXED_RATE)
-		goto out;
-
-	clock_lock();
-	if ((clk->flags & PARENT_SET_RATE) && clk->parent) {
-
-		clk->user_rate = clk->round_rate(clk, rate);
-		/* parent clock needs to be refreshed
-		   for the setting to take effect */
-	} else {
-		ret = local_set_rate(clk, rate);
-	}
-	ret = 0;
-	clock_unlock();
-
-out:
-	return ret;
-}
-
-EXPORT_SYMBOL(clk_set_rate);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	unsigned long ret;
-	clock_lock();
-	ret = clk->rate;
-	clock_unlock();
-	return ret;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-int clk_enable(struct clk *clk)
-{
-	int ret;
-
-	clock_lock();
-	ret = local_clk_enable(clk);
-	clock_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-	clock_lock();
-	local_clk_disable(clk);
-	clock_unlock();
-}
-
-EXPORT_SYMBOL(clk_disable);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	long ret;
-	clock_lock();
-	if (clk->round_rate)
-		ret = clk->round_rate(clk, rate);
-	else
-		ret = clk->rate;
-	clock_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	int ret = -ENODEV;
-	if (!clk->set_parent)
-		goto out;
-
-	clock_lock();
-	ret = clk->set_parent(clk, parent);
-	if (!ret)
-		clk->parent = parent;
-	clock_unlock();
-
-out:
-	return ret;
-}
-
-EXPORT_SYMBOL(clk_set_parent);
-
-static int __init clk_init(void)
-{
-	struct clk **clkp;
-
-	/* Disable autoclocking, as it doesn't seem to work */
-	__raw_writel(0xff, AUTOCLK_CTRL);
-
-	for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks);
-	     clkp++) {
-		struct clk *clk = *clkp;
-		if (clk->flags & NEEDS_INITIALIZATION) {
-			if (clk->set_rate) {
-				clk->user_rate = clk->rate;
-				local_set_rate(clk, clk->user_rate);
-				if (clk->set_parent)
-					clk->set_parent(clk, clk->parent);
-			}
-			if (clk->enable && clk->usecount)
-				clk->enable(clk);
-			if (clk->disable && !clk->usecount)
-				clk->disable(clk);
-		}
-		pr_debug("%s: clock %s, rate %ld\n",
-			__func__, clk->name, clk->rate);
-	}
-
-	local_clk_enable(&ck_pll4);
-
-	/* if ck_13MHz is not used, disable it. */
-	if (ck_13MHz.usecount == 0)
-		local_clk_disable(&ck_13MHz);
-
-	/* Disable autoclocking */
-	__raw_writeb(0xff, AUTOCLK_CTRL);
-
-	clkdev_add_table(onchip_clkreg, ARRAY_SIZE(onchip_clkreg));
-
-	return 0;
-}
-
-arch_initcall(clk_init);
diff --git a/arch/arm/mach-pnx4008/clock.h b/arch/arm/mach-pnx4008/clock.h
deleted file mode 100644
index 39720d6c0d01..000000000000
--- a/arch/arm/mach-pnx4008/clock.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/clock.h
- *
- * Clock control driver for PNX4008 - internal header file
- *
- * Author: Vitaly Wool <source@mvista.com>
- *
- * 2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ARCH_ARM_PNX4008_CLOCK_H__
-#define __ARCH_ARM_PNX4008_CLOCK_H__
-
-struct clk {
-	const char *name;
-	struct clk *parent;
-	struct clk *propagate_next;
-	u32 rate;
-	u32 user_rate;
-	s8 usecount;
-	u32 flags;
-	u32 scale_reg;
-	u8 enable_shift;
-	u32 enable_reg;
-	u8 enable_shift1;
-	u32 enable_reg1;
-	u32 parent_switch_reg;
-	u32(*round_rate) (struct clk *, u32);
-	int (*set_rate) (struct clk *, u32);
-	int (*set_parent) (struct clk * clk, struct clk * parent);
-	int (*enable)(struct clk *);
-	void (*disable)(struct clk *);
-};
-
-/* Flags */
-#define RATE_PROPAGATES      (1<<0)
-#define NEEDS_INITIALIZATION (1<<1)
-#define PARENT_SET_RATE      (1<<2)
-#define FIXED_RATE           (1<<3)
-
-#endif
diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c
deleted file mode 100644
index a00d2f1254ed..000000000000
--- a/arch/arm/mach-pnx4008/core.c
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/core.c
- *
- * PNX4008 core startup code
- *
- * Authors: Vitaly Wool, Dmitry Chigirev,
- * Grigory Tolstolytkin, Dmitry Pervushin <source@mvista.com>
- *
- * Based on reference code received from Philips:
- * Copyright (C) 2003 Philips Semiconductors
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/serial_8250.h>
-#include <linux/device.h>
-#include <linux/spi/spi.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/system_misc.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include <mach/irq.h>
-#include <mach/clock.h>
-#include <mach/dma.h>
-
-struct resource spipnx_0_resources[] = {
-	{
-		.start = PNX4008_SPI1_BASE,
-		.end = PNX4008_SPI1_BASE + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = PER_SPI1_REC_XMIT,
-		.flags = IORESOURCE_DMA,
-	}, {
-		.start = SPI1_INT,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.flags = 0,
-	},
-};
-
-struct resource spipnx_1_resources[] = {
-	{
-		.start = PNX4008_SPI2_BASE,
-		.end = PNX4008_SPI2_BASE + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = PER_SPI2_REC_XMIT,
-		.flags = IORESOURCE_DMA,
-	}, {
-		.start = SPI2_INT,
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.flags = 0,
-	}
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-	{
-		.modalias	= "m25p80",
-		.max_speed_hz	= 1000000,
-		.bus_num	= 1,
-		.chip_select	= 0,
-	},
-};
-
-static struct platform_device spipnx_1 = {
-	.name = "spipnx",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(spipnx_0_resources),
-	.resource = spipnx_0_resources,
-	.dev = {
-		.coherent_dma_mask = 0xFFFFFFFF,
-		},
-};
-
-static struct platform_device spipnx_2 = {
-	.name = "spipnx",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(spipnx_1_resources),
-	.resource = spipnx_1_resources,
-	.dev = {
-		.coherent_dma_mask = 0xFFFFFFFF,
-		},
-};
-
-static struct plat_serial8250_port platform_serial_ports[] = {
-	{
-		.membase = (void *)__iomem(IO_ADDRESS(PNX4008_UART5_BASE)),
-		.mapbase = (unsigned long)PNX4008_UART5_BASE,
-		.irq = IIR5_INT,
-		.uartclk = PNX4008_UART_CLK,
-		.regshift = 2,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | UPF_SKIP_TEST,
-	},
-	{
-		.membase = (void *)__iomem(IO_ADDRESS(PNX4008_UART3_BASE)),
-		.mapbase = (unsigned long)PNX4008_UART3_BASE,
-		.irq = IIR3_INT,
-		.uartclk = PNX4008_UART_CLK,
-		.regshift = 2,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART | UPF_SKIP_TEST,
-	 },
-	{}
-};
-
-static struct platform_device serial_device = {
-	.name = "serial8250",
-	.id = PLAT8250_DEV_PLATFORM,
-	.dev = {
-		.platform_data = &platform_serial_ports,
-	},
-};
-
-static struct platform_device nand_flash_device = {
-	.name = "pnx4008-flash",
-	.id = -1,
-	.dev = {
-		.coherent_dma_mask = 0xFFFFFFFF,
-	},
-};
-
-/* The dmamask must be set for OHCI to work */
-static u64 ohci_dmamask = ~(u32) 0;
-
-static struct resource ohci_resources[] = {
-	{
-		.start = IO_ADDRESS(PNX4008_USB_CONFIG_BASE),
-		.end = IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0x100),
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = USB_HOST_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ohci_device = {
-	.name = "pnx4008-usb-ohci",
-	.id = -1,
-	.dev = {
-		.dma_mask = &ohci_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-		},
-	.num_resources = ARRAY_SIZE(ohci_resources),
-	.resource = ohci_resources,
-};
-
-static struct platform_device sdum_device = {
-	.name = "pnx4008-sdum",
-	.id = 0,
-	.dev = {
-		.coherent_dma_mask = 0xffffffff,
-	},
-};
-
-static struct platform_device rgbfb_device = {
-	.name = "pnx4008-rgbfb",
-	.id = 0,
-	.dev = {
-		.coherent_dma_mask = 0xffffffff,
-	}
-};
-
-struct resource watchdog_resources[] = {
-	{
-		.start = PNX4008_WDOG_BASE,
-		.end = PNX4008_WDOG_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device watchdog_device = {
-	.name = "pnx4008-watchdog",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(watchdog_resources),
-	.resource = watchdog_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&spipnx_1,
-	&spipnx_2,
-	&serial_device,
-	&ohci_device,
-	&nand_flash_device,
-	&sdum_device,
-	&rgbfb_device,
-	&watchdog_device,
-};
-
-
-extern void pnx4008_uart_init(void);
-
-static void __init pnx4008_init(void)
-{
-	/*disable all START interrupt sources,
-	   and clear all START interrupt flags */
-	__raw_writel(0, START_INT_ER_REG(SE_PIN_BASE_INT));
-	__raw_writel(0, START_INT_ER_REG(SE_INT_BASE_INT));
-	__raw_writel(0xffffffff, START_INT_RSR_REG(SE_PIN_BASE_INT));
-	__raw_writel(0xffffffff, START_INT_RSR_REG(SE_INT_BASE_INT));
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-	/* Switch on the UART clocks */
-	pnx4008_uart_init();
-}
-
-static struct map_desc pnx4008_io_desc[] __initdata = {
-	{
-		.virtual 	= IO_ADDRESS(PNX4008_IRAM_BASE),
-		.pfn 		= __phys_to_pfn(PNX4008_IRAM_BASE),
-		.length		= SZ_64K,
-		.type 		= MT_DEVICE,
-	}, {
-		.virtual 	= IO_ADDRESS(PNX4008_NDF_FLASH_BASE),
-		.pfn 		= __phys_to_pfn(PNX4008_NDF_FLASH_BASE),
-		.length		= SZ_1M - SZ_128K,
-		.type 		= MT_DEVICE,
-	}, {
-		.virtual 	= IO_ADDRESS(PNX4008_JPEG_CONFIG_BASE),
-		.pfn 		= __phys_to_pfn(PNX4008_JPEG_CONFIG_BASE),
-		.length		= SZ_128K * 3,
-		.type 		= MT_DEVICE,
-	}, {
-		.virtual 	= IO_ADDRESS(PNX4008_DMA_CONFIG_BASE),
-		.pfn 		= __phys_to_pfn(PNX4008_DMA_CONFIG_BASE),
-		.length		= SZ_1M,
-		.type 		= MT_DEVICE,
-	}, {
-		.virtual 	= IO_ADDRESS(PNX4008_AHB2FAB_BASE),
-		.pfn 		= __phys_to_pfn(PNX4008_AHB2FAB_BASE),
-		.length		= SZ_1M,
-		.type 		= MT_DEVICE,
-	},
-};
-
-void __init pnx4008_map_io(void)
-{
-	iotable_init(pnx4008_io_desc, ARRAY_SIZE(pnx4008_io_desc));
-}
-
-static void pnx4008_restart(char mode, const char *cmd)
-{
-	soft_restart(0);
-}
-
-#ifdef CONFIG_PM
-extern int pnx4008_pm_init(void);
-#else
-static inline int pnx4008_pm_init(void) { return 0; }
-#endif
-
-void __init pnx4008_init_late(void)
-{
-	pnx4008_pm_init();
-}
-
-extern struct sys_timer pnx4008_timer;
-
-MACHINE_START(PNX4008, "Philips PNX4008")
-	/* Maintainer: MontaVista Software Inc. */
-	.atag_offset		= 0x100,
-	.map_io 		= pnx4008_map_io,
-	.init_irq 		= pnx4008_init_irq,
-	.init_machine 		= pnx4008_init,
-	.init_late		= pnx4008_init_late,
-	.timer 			= &pnx4008_timer,
-	.restart		= pnx4008_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c
deleted file mode 100644
index a4739e9fb2fb..000000000000
--- a/arch/arm/mach-pnx4008/dma.c
+++ /dev/null
@@ -1,1105 +0,0 @@
-/*
- *  linux/arch/arm/mach-pnx4008/dma.c
- *
- *  PNX4008 DMA registration and IRQ dispatching
- *
- *  Author:	Vitaly Wool
- *  Copyright:	MontaVista Software Inc. (c) 2005
- *
- *  Based on the code from Nicolas Pitre
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/dma-mapping.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/gfp.h>
-
-#include <mach/hardware.h>
-#include <mach/dma.h>
-#include <asm/dma-mapping.h>
-#include <mach/clock.h>
-
-static struct dma_channel {
-	char *name;
-	void (*irq_handler) (int, int, void *);
-	void *data;
-	struct pnx4008_dma_ll *ll;
-	u32 ll_dma;
-	void *target_addr;
-	int target_id;
-} dma_channels[MAX_DMA_CHANNELS];
-
-static struct ll_pool {
-	void *vaddr;
-	void *cur;
-	dma_addr_t dma_addr;
-	int count;
-} ll_pool;
-
-static DEFINE_SPINLOCK(ll_lock);
-
-struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t * ll_dma)
-{
-	struct pnx4008_dma_ll *ll = NULL;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ll_lock, flags);
-	if (ll_pool.count > 4) { /* can give one more */
-		ll = *(struct pnx4008_dma_ll **) ll_pool.cur;
-		*ll_dma = ll_pool.dma_addr + ((void *)ll - ll_pool.vaddr);
-		*(void **)ll_pool.cur = **(void ***)ll_pool.cur;
-		memset(ll, 0, sizeof(*ll));
-		ll_pool.count--;
-	}
-	spin_unlock_irqrestore(&ll_lock, flags);
-
-	return ll;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_alloc_ll_entry);
-
-void pnx4008_free_ll_entry(struct pnx4008_dma_ll * ll, dma_addr_t ll_dma)
-{
-	unsigned long flags;
-
-	if (ll) {
-		if ((unsigned long)((long)ll - (long)ll_pool.vaddr) > 0x4000) {
-			printk(KERN_ERR "Trying to free entry not allocated by DMA\n");
-			BUG();
-		}
-
-		if (ll->flags & DMA_BUFFER_ALLOCATED)
-			ll->free(ll->alloc_data);
-
-		spin_lock_irqsave(&ll_lock, flags);
-		*(long *)ll = *(long *)ll_pool.cur;
-		*(long *)ll_pool.cur = (long)ll;
-		ll_pool.count++;
-		spin_unlock_irqrestore(&ll_lock, flags);
-	}
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_free_ll_entry);
-
-void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll * ll)
-{
-	struct pnx4008_dma_ll *ptr;
-	u32 dma;
-
-	while (ll) {
-		dma = ll->next_dma;
-		ptr = ll->next;
-		pnx4008_free_ll_entry(ll, ll_dma);
-
-		ll_dma = dma;
-		ll = ptr;
-	}
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_free_ll);
-
-static int dma_channels_requested = 0;
-
-static inline void dma_increment_usage(void)
-{
-	if (!dma_channels_requested++) {
-		struct clk *clk = clk_get(0, "dma_ck");
-		if (!IS_ERR(clk)) {
-			clk_set_rate(clk, 1);
-			clk_put(clk);
-		}
-		pnx4008_config_dma(-1, -1, 1);
-	}
-}
-static inline void dma_decrement_usage(void)
-{
-	if (!--dma_channels_requested) {
-		struct clk *clk = clk_get(0, "dma_ck");
-		if (!IS_ERR(clk)) {
-			clk_set_rate(clk, 0);
-			clk_put(clk);
-		}
-		pnx4008_config_dma(-1, -1, 0);
-
-	}
-}
-
-static DEFINE_SPINLOCK(dma_lock);
-
-static inline void pnx4008_dma_lock(void)
-{
-	spin_lock_irq(&dma_lock);
-}
-
-static inline void pnx4008_dma_unlock(void)
-{
-	spin_unlock_irq(&dma_lock);
-}
-
-#define VALID_CHANNEL(c)	(((c) >= 0) && ((c) < MAX_DMA_CHANNELS))
-
-int pnx4008_request_channel(char *name, int ch,
-			    void (*irq_handler) (int, int, void *), void *data)
-{
-	int i, found = 0;
-
-	/* basic sanity checks */
-	if (!name || (ch != -1 && !VALID_CHANNEL(ch)))
-		return -EINVAL;
-
-	pnx4008_dma_lock();
-
-	/* try grabbing a DMA channel with the requested priority */
-	for (i = MAX_DMA_CHANNELS - 1; i >= 0; i--) {
-		if (!dma_channels[i].name && (ch == -1 || ch == i)) {
-			found = 1;
-			break;
-		}
-	}
-
-	if (found) {
-		dma_increment_usage();
-		dma_channels[i].name = name;
-		dma_channels[i].irq_handler = irq_handler;
-		dma_channels[i].data = data;
-		dma_channels[i].ll = NULL;
-		dma_channels[i].ll_dma = 0;
-	} else {
-		printk(KERN_WARNING "No more available DMA channels for %s\n",
-		       name);
-		i = -ENODEV;
-	}
-
-	pnx4008_dma_unlock();
-	return i;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_request_channel);
-
-void pnx4008_free_channel(int ch)
-{
-	if (!dma_channels[ch].name) {
-		printk(KERN_CRIT
-		       "%s: trying to free channel %d which is already freed\n",
-		       __func__, ch);
-		return;
-	}
-
-	pnx4008_dma_lock();
-	pnx4008_free_ll(dma_channels[ch].ll_dma, dma_channels[ch].ll);
-	dma_channels[ch].ll = NULL;
-	dma_decrement_usage();
-
-	dma_channels[ch].name = NULL;
-	pnx4008_dma_unlock();
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_free_channel);
-
-int pnx4008_config_dma(int ahb_m1_be, int ahb_m2_be, int enable)
-{
-	unsigned long dma_cfg = __raw_readl(DMAC_CONFIG);
-
-	switch (ahb_m1_be) {
-	case 0:
-		dma_cfg &= ~(1 << 1);
-		break;
-	case 1:
-		dma_cfg |= (1 << 1);
-		break;
-	default:
-		break;
-	}
-
-	switch (ahb_m2_be) {
-	case 0:
-		dma_cfg &= ~(1 << 2);
-		break;
-	case 1:
-		dma_cfg |= (1 << 2);
-		break;
-	default:
-		break;
-	}
-
-	switch (enable) {
-	case 0:
-		dma_cfg &= ~(1 << 0);
-		break;
-	case 1:
-		dma_cfg |= (1 << 0);
-		break;
-	default:
-		break;
-	}
-
-	pnx4008_dma_lock();
-	__raw_writel(dma_cfg, DMAC_CONFIG);
-	pnx4008_dma_unlock();
-
-	return 0;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_config_dma);
-
-int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl * ch_ctrl,
-			     unsigned long *ctrl)
-{
-	int i = 0, dbsize, sbsize, err = 0;
-
-	if (!ctrl || !ch_ctrl) {
-		err = -EINVAL;
-		goto out;
-	}
-
-	*ctrl = 0;
-
-	switch (ch_ctrl->tc_mask) {
-	case 0:
-		break;
-	case 1:
-		*ctrl |= (1 << 31);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-
-	switch (ch_ctrl->cacheable) {
-	case 0:
-		break;
-	case 1:
-		*ctrl |= (1 << 30);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_ctrl->bufferable) {
-	case 0:
-		break;
-	case 1:
-		*ctrl |= (1 << 29);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_ctrl->priv_mode) {
-	case 0:
-		break;
-	case 1:
-		*ctrl |= (1 << 28);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_ctrl->di) {
-	case 0:
-		break;
-	case 1:
-		*ctrl |= (1 << 27);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_ctrl->si) {
-	case 0:
-		break;
-	case 1:
-		*ctrl |= (1 << 26);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_ctrl->dest_ahb1) {
-	case 0:
-		break;
-	case 1:
-		*ctrl |= (1 << 25);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_ctrl->src_ahb1) {
-	case 0:
-		break;
-	case 1:
-		*ctrl |= (1 << 24);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_ctrl->dwidth) {
-	case WIDTH_BYTE:
-		*ctrl &= ~(7 << 21);
-		break;
-	case WIDTH_HWORD:
-		*ctrl &= ~(7 << 21);
-		*ctrl |= (1 << 21);
-		break;
-	case WIDTH_WORD:
-		*ctrl &= ~(7 << 21);
-		*ctrl |= (2 << 21);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_ctrl->swidth) {
-	case WIDTH_BYTE:
-		*ctrl &= ~(7 << 18);
-		break;
-	case WIDTH_HWORD:
-		*ctrl &= ~(7 << 18);
-		*ctrl |= (1 << 18);
-		break;
-	case WIDTH_WORD:
-		*ctrl &= ~(7 << 18);
-		*ctrl |= (2 << 18);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	dbsize = ch_ctrl->dbsize;
-	while (!(dbsize & 1)) {
-		i++;
-		dbsize >>= 1;
-	}
-	if (ch_ctrl->dbsize != 1 || i > 8 || i == 1) {
-		err = -EINVAL;
-		goto out;
-	} else if (i > 1)
-		i--;
-	*ctrl &= ~(7 << 15);
-	*ctrl |= (i << 15);
-
-	sbsize = ch_ctrl->sbsize;
-	while (!(sbsize & 1)) {
-		i++;
-		sbsize >>= 1;
-	}
-	if (ch_ctrl->sbsize != 1 || i > 8 || i == 1) {
-		err = -EINVAL;
-		goto out;
-	} else if (i > 1)
-		i--;
-	*ctrl &= ~(7 << 12);
-	*ctrl |= (i << 12);
-
-	if (ch_ctrl->tr_size > 0x7ff) {
-		err = -E2BIG;
-		goto out;
-	}
-	*ctrl &= ~0x7ff;
-	*ctrl |= ch_ctrl->tr_size & 0x7ff;
-
-out:
-	return err;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_pack_control);
-
-int pnx4008_dma_parse_control(unsigned long ctrl,
-			      struct pnx4008_dma_ch_ctrl * ch_ctrl)
-{
-	int err = 0;
-
-	if (!ch_ctrl) {
-		err = -EINVAL;
-		goto out;
-	}
-
-	ch_ctrl->tr_size = ctrl & 0x7ff;
-	ctrl >>= 12;
-
-	ch_ctrl->sbsize = 1 << (ctrl & 7);
-	if (ch_ctrl->sbsize > 1)
-		ch_ctrl->sbsize <<= 1;
-	ctrl >>= 3;
-
-	ch_ctrl->dbsize = 1 << (ctrl & 7);
-	if (ch_ctrl->dbsize > 1)
-		ch_ctrl->dbsize <<= 1;
-	ctrl >>= 3;
-
-	switch (ctrl & 7) {
-	case 0:
-		ch_ctrl->swidth = WIDTH_BYTE;
-		break;
-	case 1:
-		ch_ctrl->swidth = WIDTH_HWORD;
-		break;
-	case 2:
-		ch_ctrl->swidth = WIDTH_WORD;
-		break;
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	ctrl >>= 3;
-
-	switch (ctrl & 7) {
-	case 0:
-		ch_ctrl->dwidth = WIDTH_BYTE;
-		break;
-	case 1:
-		ch_ctrl->dwidth = WIDTH_HWORD;
-		break;
-	case 2:
-		ch_ctrl->dwidth = WIDTH_WORD;
-		break;
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	ctrl >>= 3;
-
-	ch_ctrl->src_ahb1 = ctrl & 1;
-	ctrl >>= 1;
-
-	ch_ctrl->dest_ahb1 = ctrl & 1;
-	ctrl >>= 1;
-
-	ch_ctrl->si = ctrl & 1;
-	ctrl >>= 1;
-
-	ch_ctrl->di = ctrl & 1;
-	ctrl >>= 1;
-
-	ch_ctrl->priv_mode = ctrl & 1;
-	ctrl >>= 1;
-
-	ch_ctrl->bufferable = ctrl & 1;
-	ctrl >>= 1;
-
-	ch_ctrl->cacheable = ctrl & 1;
-	ctrl >>= 1;
-
-	ch_ctrl->tc_mask = ctrl & 1;
-
-out:
-	return err;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_parse_control);
-
-int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config * ch_cfg,
-			    unsigned long *cfg)
-{
-	int err = 0;
-
-	if (!cfg || !ch_cfg) {
-		err = -EINVAL;
-		goto out;
-	}
-
-	*cfg = 0;
-
-	switch (ch_cfg->halt) {
-	case 0:
-		break;
-	case 1:
-		*cfg |= (1 << 18);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_cfg->active) {
-	case 0:
-		break;
-	case 1:
-		*cfg |= (1 << 17);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_cfg->lock) {
-	case 0:
-		break;
-	case 1:
-		*cfg |= (1 << 16);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_cfg->itc) {
-	case 0:
-		break;
-	case 1:
-		*cfg |= (1 << 15);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_cfg->ie) {
-	case 0:
-		break;
-	case 1:
-		*cfg |= (1 << 14);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	switch (ch_cfg->flow_cntrl) {
-	case FC_MEM2MEM_DMA:
-		*cfg &= ~(7 << 11);
-		break;
-	case FC_MEM2PER_DMA:
-		*cfg &= ~(7 << 11);
-		*cfg |= (1 << 11);
-		break;
-	case FC_PER2MEM_DMA:
-		*cfg &= ~(7 << 11);
-		*cfg |= (2 << 11);
-		break;
-	case FC_PER2PER_DMA:
-		*cfg &= ~(7 << 11);
-		*cfg |= (3 << 11);
-		break;
-	case FC_PER2PER_DPER:
-		*cfg &= ~(7 << 11);
-		*cfg |= (4 << 11);
-		break;
-	case FC_MEM2PER_PER:
-		*cfg &= ~(7 << 11);
-		*cfg |= (5 << 11);
-		break;
-	case FC_PER2MEM_PER:
-		*cfg &= ~(7 << 11);
-		*cfg |= (6 << 11);
-		break;
-	case FC_PER2PER_SPER:
-		*cfg |= (7 << 11);
-		break;
-
-	default:
-		err = -EINVAL;
-		goto out;
-	}
-	*cfg &= ~(0x1f << 6);
-	*cfg |= ((ch_cfg->dest_per & 0x1f) << 6);
-
-	*cfg &= ~(0x1f << 1);
-	*cfg |= ((ch_cfg->src_per & 0x1f) << 1);
-
-out:
-	return err;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_pack_config);
-
-int pnx4008_dma_parse_config(unsigned long cfg,
-			     struct pnx4008_dma_ch_config * ch_cfg)
-{
-	int err = 0;
-
-	if (!ch_cfg) {
-		err = -EINVAL;
-		goto out;
-	}
-
-	cfg >>= 1;
-
-	ch_cfg->src_per = cfg & 0x1f;
-	cfg >>= 5;
-
-	ch_cfg->dest_per = cfg & 0x1f;
-	cfg >>= 5;
-
-	switch (cfg & 7) {
-	case 0:
-		ch_cfg->flow_cntrl = FC_MEM2MEM_DMA;
-		break;
-	case 1:
-		ch_cfg->flow_cntrl = FC_MEM2PER_DMA;
-		break;
-	case 2:
-		ch_cfg->flow_cntrl = FC_PER2MEM_DMA;
-		break;
-	case 3:
-		ch_cfg->flow_cntrl = FC_PER2PER_DMA;
-		break;
-	case 4:
-		ch_cfg->flow_cntrl = FC_PER2PER_DPER;
-		break;
-	case 5:
-		ch_cfg->flow_cntrl = FC_MEM2PER_PER;
-		break;
-	case 6:
-		ch_cfg->flow_cntrl = FC_PER2MEM_PER;
-		break;
-	case 7:
-		ch_cfg->flow_cntrl = FC_PER2PER_SPER;
-	}
-	cfg >>= 3;
-
-	ch_cfg->ie = cfg & 1;
-	cfg >>= 1;
-
-	ch_cfg->itc = cfg & 1;
-	cfg >>= 1;
-
-	ch_cfg->lock = cfg & 1;
-	cfg >>= 1;
-
-	ch_cfg->active = cfg & 1;
-	cfg >>= 1;
-
-	ch_cfg->halt = cfg & 1;
-
-out:
-	return err;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_parse_config);
-
-void pnx4008_dma_split_head_entry(struct pnx4008_dma_config * config,
-				  struct pnx4008_dma_ch_ctrl * ctrl)
-{
-	int new_len = ctrl->tr_size, num_entries = 0;
-	int old_len = new_len;
-	int src_width, dest_width, count = 1;
-
-	switch (ctrl->swidth) {
-	case WIDTH_BYTE:
-		src_width = 1;
-		break;
-	case WIDTH_HWORD:
-		src_width = 2;
-		break;
-	case WIDTH_WORD:
-		src_width = 4;
-		break;
-	default:
-		return;
-	}
-
-	switch (ctrl->dwidth) {
-	case WIDTH_BYTE:
-		dest_width = 1;
-		break;
-	case WIDTH_HWORD:
-		dest_width = 2;
-		break;
-	case WIDTH_WORD:
-		dest_width = 4;
-		break;
-	default:
-		return;
-	}
-
-	while (new_len > 0x7FF) {
-		num_entries++;
-		new_len = (ctrl->tr_size + num_entries) / (num_entries + 1);
-	}
-	if (num_entries != 0) {
-		struct pnx4008_dma_ll *ll = NULL;
-		config->ch_ctrl &= ~0x7ff;
-		config->ch_ctrl |= new_len;
-		if (!config->is_ll) {
-			config->is_ll = 1;
-			while (num_entries) {
-				if (!ll) {
-					config->ll =
-					    pnx4008_alloc_ll_entry(&config->
-								   ll_dma);
-					ll = config->ll;
-				} else {
-					ll->next =
-					    pnx4008_alloc_ll_entry(&ll->
-								   next_dma);
-					ll = ll->next;
-				}
-
-				if (ctrl->si)
-					ll->src_addr =
-					    config->src_addr +
-					    src_width * new_len * count;
-				else
-					ll->src_addr = config->src_addr;
-				if (ctrl->di)
-					ll->dest_addr =
-					    config->dest_addr +
-					    dest_width * new_len * count;
-				else
-					ll->dest_addr = config->dest_addr;
-				ll->ch_ctrl = config->ch_ctrl & 0x7fffffff;
-				ll->next_dma = 0;
-				ll->next = NULL;
-				num_entries--;
-				count++;
-			}
-		} else {
-			struct pnx4008_dma_ll *ll_old = config->ll;
-			unsigned long ll_dma_old = config->ll_dma;
-			while (num_entries) {
-				if (!ll) {
-					config->ll =
-					    pnx4008_alloc_ll_entry(&config->
-								   ll_dma);
-					ll = config->ll;
-				} else {
-					ll->next =
-					    pnx4008_alloc_ll_entry(&ll->
-								   next_dma);
-					ll = ll->next;
-				}
-
-				if (ctrl->si)
-					ll->src_addr =
-					    config->src_addr +
-					    src_width * new_len * count;
-				else
-					ll->src_addr = config->src_addr;
-				if (ctrl->di)
-					ll->dest_addr =
-					    config->dest_addr +
-					    dest_width * new_len * count;
-				else
-					ll->dest_addr = config->dest_addr;
-				ll->ch_ctrl = config->ch_ctrl & 0x7fffffff;
-				ll->next_dma = 0;
-				ll->next = NULL;
-				num_entries--;
-				count++;
-			}
-			ll->next_dma = ll_dma_old;
-			ll->next = ll_old;
-		}
-		/* adjust last length/tc */
-		ll->ch_ctrl = config->ch_ctrl & (~0x7ff);
-		ll->ch_ctrl |= old_len - new_len * (count - 1);
-		config->ch_ctrl &= 0x7fffffff;
-	}
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_split_head_entry);
-
-void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll * cur_ll,
-				struct pnx4008_dma_ch_ctrl * ctrl)
-{
-	int new_len = ctrl->tr_size, num_entries = 0;
-	int old_len = new_len;
-	int src_width, dest_width, count = 1;
-
-	switch (ctrl->swidth) {
-	case WIDTH_BYTE:
-		src_width = 1;
-		break;
-	case WIDTH_HWORD:
-		src_width = 2;
-		break;
-	case WIDTH_WORD:
-		src_width = 4;
-		break;
-	default:
-		return;
-	}
-
-	switch (ctrl->dwidth) {
-	case WIDTH_BYTE:
-		dest_width = 1;
-		break;
-	case WIDTH_HWORD:
-		dest_width = 2;
-		break;
-	case WIDTH_WORD:
-		dest_width = 4;
-		break;
-	default:
-		return;
-	}
-
-	while (new_len > 0x7FF) {
-		num_entries++;
-		new_len = (ctrl->tr_size + num_entries) / (num_entries + 1);
-	}
-	if (num_entries != 0) {
-		struct pnx4008_dma_ll *ll = NULL;
-		cur_ll->ch_ctrl &= ~0x7ff;
-		cur_ll->ch_ctrl |= new_len;
-		if (!cur_ll->next) {
-			while (num_entries) {
-				if (!ll) {
-					cur_ll->next =
-					    pnx4008_alloc_ll_entry(&cur_ll->
-								   next_dma);
-					ll = cur_ll->next;
-				} else {
-					ll->next =
-					    pnx4008_alloc_ll_entry(&ll->
-								   next_dma);
-					ll = ll->next;
-				}
-
-				if (ctrl->si)
-					ll->src_addr =
-					    cur_ll->src_addr +
-					    src_width * new_len * count;
-				else
-					ll->src_addr = cur_ll->src_addr;
-				if (ctrl->di)
-					ll->dest_addr =
-					    cur_ll->dest_addr +
-					    dest_width * new_len * count;
-				else
-					ll->dest_addr = cur_ll->dest_addr;
-				ll->ch_ctrl = cur_ll->ch_ctrl & 0x7fffffff;
-				ll->next_dma = 0;
-				ll->next = NULL;
-				num_entries--;
-				count++;
-			}
-		} else {
-			struct pnx4008_dma_ll *ll_old = cur_ll->next;
-			unsigned long ll_dma_old = cur_ll->next_dma;
-			while (num_entries) {
-				if (!ll) {
-					cur_ll->next =
-					    pnx4008_alloc_ll_entry(&cur_ll->
-								   next_dma);
-					ll = cur_ll->next;
-				} else {
-					ll->next =
-					    pnx4008_alloc_ll_entry(&ll->
-								   next_dma);
-					ll = ll->next;
-				}
-
-				if (ctrl->si)
-					ll->src_addr =
-					    cur_ll->src_addr +
-					    src_width * new_len * count;
-				else
-					ll->src_addr = cur_ll->src_addr;
-				if (ctrl->di)
-					ll->dest_addr =
-					    cur_ll->dest_addr +
-					    dest_width * new_len * count;
-				else
-					ll->dest_addr = cur_ll->dest_addr;
-				ll->ch_ctrl = cur_ll->ch_ctrl & 0x7fffffff;
-				ll->next_dma = 0;
-				ll->next = NULL;
-				num_entries--;
-				count++;
-			}
-
-			ll->next_dma = ll_dma_old;
-			ll->next = ll_old;
-		}
-		/* adjust last length/tc */
-		ll->ch_ctrl = cur_ll->ch_ctrl & (~0x7ff);
-		ll->ch_ctrl |= old_len - new_len * (count - 1);
-		cur_ll->ch_ctrl &= 0x7fffffff;
-	}
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_split_ll_entry);
-
-int pnx4008_config_channel(int ch, struct pnx4008_dma_config * config)
-{
-	if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
-		return -EINVAL;
-
-	pnx4008_dma_lock();
-	__raw_writel(config->src_addr, DMAC_Cx_SRC_ADDR(ch));
-	__raw_writel(config->dest_addr, DMAC_Cx_DEST_ADDR(ch));
-
-	if (config->is_ll)
-		__raw_writel(config->ll_dma, DMAC_Cx_LLI(ch));
-	else
-		__raw_writel(0, DMAC_Cx_LLI(ch));
-
-	__raw_writel(config->ch_ctrl, DMAC_Cx_CONTROL(ch));
-	__raw_writel(config->ch_cfg, DMAC_Cx_CONFIG(ch));
-	pnx4008_dma_unlock();
-
-	return 0;
-
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_config_channel);
-
-int pnx4008_channel_get_config(int ch, struct pnx4008_dma_config * config)
-{
-	if (!VALID_CHANNEL(ch) || !dma_channels[ch].name || !config)
-		return -EINVAL;
-
-	pnx4008_dma_lock();
-	config->ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
-	config->ch_ctrl = __raw_readl(DMAC_Cx_CONTROL(ch));
-
-	config->ll_dma = __raw_readl(DMAC_Cx_LLI(ch));
-	config->is_ll = config->ll_dma ? 1 : 0;
-
-	config->src_addr = __raw_readl(DMAC_Cx_SRC_ADDR(ch));
-	config->dest_addr = __raw_readl(DMAC_Cx_DEST_ADDR(ch));
-	pnx4008_dma_unlock();
-
-	return 0;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_channel_get_config);
-
-int pnx4008_dma_ch_enable(int ch)
-{
-	unsigned long ch_cfg;
-
-	if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
-		return -EINVAL;
-
-	pnx4008_dma_lock();
-	ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
-	ch_cfg |= 1;
-	__raw_writel(ch_cfg, DMAC_Cx_CONFIG(ch));
-	pnx4008_dma_unlock();
-
-	return 0;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_ch_enable);
-
-int pnx4008_dma_ch_disable(int ch)
-{
-	unsigned long ch_cfg;
-
-	if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
-		return -EINVAL;
-
-	pnx4008_dma_lock();
-	ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
-	ch_cfg &= ~1;
-	__raw_writel(ch_cfg, DMAC_Cx_CONFIG(ch));
-	pnx4008_dma_unlock();
-
-	return 0;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_ch_disable);
-
-int pnx4008_dma_ch_enabled(int ch)
-{
-	unsigned long ch_cfg;
-
-	if (!VALID_CHANNEL(ch) || !dma_channels[ch].name)
-		return -EINVAL;
-
-	pnx4008_dma_lock();
-	ch_cfg = __raw_readl(DMAC_Cx_CONFIG(ch));
-	pnx4008_dma_unlock();
-
-	return ch_cfg & 1;
-}
-
-EXPORT_SYMBOL_GPL(pnx4008_dma_ch_enabled);
-
-static irqreturn_t dma_irq_handler(int irq, void *dev_id)
-{
-	int i;
-	unsigned long dint = __raw_readl(DMAC_INT_STAT);
-	unsigned long tcint = __raw_readl(DMAC_INT_TC_STAT);
-	unsigned long eint = __raw_readl(DMAC_INT_ERR_STAT);
-	unsigned long i_bit;
-
-	for (i = MAX_DMA_CHANNELS - 1; i >= 0; i--) {
-		i_bit = 1 << i;
-		if (dint & i_bit) {
-			struct dma_channel *channel = &dma_channels[i];
-
-			if (channel->name && channel->irq_handler) {
-				int cause = 0;
-
-				if (eint & i_bit)
-					cause |= DMA_ERR_INT;
-				if (tcint & i_bit)
-					cause |= DMA_TC_INT;
-				channel->irq_handler(i, cause, channel->data);
-			} else {
-				/*
-				 * IRQ for an unregistered DMA channel
-				 */
-				printk(KERN_WARNING
-				       "spurious IRQ for DMA channel %d\n", i);
-			}
-			if (tcint & i_bit)
-				__raw_writel(i_bit, DMAC_INT_TC_CLEAR);
-			if (eint & i_bit)
-				__raw_writel(i_bit, DMAC_INT_ERR_CLEAR);
-		}
-	}
-	return IRQ_HANDLED;
-}
-
-static int __init pnx4008_dma_init(void)
-{
-	int ret, i;
-
-	ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL);
-	if (ret) {
-		printk(KERN_CRIT "Wow!  Can't register IRQ for DMA\n");
-		goto out;
-	}
-
-	ll_pool.count = 0x4000 / sizeof(struct pnx4008_dma_ll);
-	ll_pool.cur = ll_pool.vaddr =
-	    dma_alloc_coherent(NULL, ll_pool.count * sizeof(struct pnx4008_dma_ll),
-			       &ll_pool.dma_addr, GFP_KERNEL);
-
-	if (!ll_pool.vaddr) {
-		ret = -ENOMEM;
-		free_irq(DMA_INT, NULL);
-		goto out;
-	}
-
-	for (i = 0; i < ll_pool.count - 1; i++) {
-		void **addr = ll_pool.vaddr + i * sizeof(struct pnx4008_dma_ll);
-		*addr = (void *)addr + sizeof(struct pnx4008_dma_ll);
-	}
-	*(long *)(ll_pool.vaddr +
-		  (ll_pool.count - 1) * sizeof(struct pnx4008_dma_ll)) =
-	    (long)ll_pool.vaddr;
-
-	__raw_writel(1, DMAC_CONFIG);
-
-out:
-	return ret;
-}
-arch_initcall(pnx4008_dma_init);
diff --git a/arch/arm/mach-pnx4008/gpio.c b/arch/arm/mach-pnx4008/gpio.c
deleted file mode 100644
index d3e71d3847b4..000000000000
--- a/arch/arm/mach-pnx4008/gpio.c
+++ /dev/null
@@ -1,328 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/gpio.c
- *
- * PNX4008 GPIO driver
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips:
- * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include <mach/gpio-pnx4008.h>
-
-/* register definitions */
-#define PIO_VA_BASE	IO_ADDRESS(PNX4008_PIO_BASE)
-
-#define PIO_INP_STATE	(0x00U)
-#define PIO_OUTP_SET	(0x04U)
-#define PIO_OUTP_CLR	(0x08U)
-#define PIO_OUTP_STATE	(0x0CU)
-#define PIO_DRV_SET	(0x10U)
-#define PIO_DRV_CLR	(0x14U)
-#define PIO_DRV_STATE	(0x18U)
-#define PIO_SDINP_STATE	(0x1CU)
-#define PIO_SDOUTP_SET	(0x20U)
-#define PIO_SDOUTP_CLR	(0x24U)
-#define PIO_MUX_SET	(0x28U)
-#define PIO_MUX_CLR	(0x2CU)
-#define PIO_MUX_STATE	(0x30U)
-
-static inline void gpio_lock(void)
-{
-	local_irq_disable();
-}
-
-static inline void gpio_unlock(void)
-{
-	local_irq_enable();
-}
-
-/* Inline functions */
-static inline int gpio_read_bit(u32 reg, int gpio)
-{
-	u32 bit, val;
-	int ret = -EFAULT;
-
-	if (gpio < 0)
-		goto out;
-
-	bit = GPIO_BIT(gpio);
-	if (bit) {
-		val = __raw_readl(PIO_VA_BASE + reg);
-		ret = (val & bit) ? 1 : 0;
-	}
-out:
-	return ret;
-}
-
-static inline int gpio_set_bit(u32 reg, int gpio)
-{
-	u32 bit, val;
-	int ret = -EFAULT;
-
-	if (gpio < 0)
-		goto out;
-
-	bit = GPIO_BIT(gpio);
-	if (bit) {
-		val = __raw_readl(PIO_VA_BASE + reg);
-		val |= bit;
-		__raw_writel(val, PIO_VA_BASE + reg);
-		ret = 0;
-	}
-out:
-	return ret;
-}
-
-/* Very simple access control, bitmap for allocated/free */
-static unsigned long access_map[4];
-#define INP_INDEX	0
-#define OUTP_INDEX	1
-#define GPIO_INDEX	2
-#define MUX_INDEX	3
-
-/*GPIO to Input Mapping */
-static short gpio_to_inp_map[32] = {
-	-1, -1, -1, -1, -1, -1, -1, -1,
-	-1, -1, -1, -1, -1, -1, -1, -1,
-	-1, -1, -1, -1, -1, -1, -1, -1,
-	-1, 10, 11, 12, 13, 14, 24, -1
-};
-
-/*GPIO to Mux Mapping */
-static short gpio_to_mux_map[32] = {
-	-1, -1, -1, -1, -1, -1, -1, -1,
-	-1, -1, -1, -1, -1, -1, -1, -1,
-	-1, -1, -1, -1, -1, -1, -1, -1,
-	-1, -1, -1, 0, 1, 4, 5, -1
-};
-
-/*Output to Mux Mapping */
-static short outp_to_mux_map[32] = {
-	-1, -1, -1, 6, -1, -1, -1, -1,
-	-1, -1, -1, -1, -1, -1, -1, -1,
-	-1, -1, -1, -1, -1, 2, -1, -1,
-	-1, -1, -1, -1, -1, -1, -1, -1
-};
-
-int pnx4008_gpio_register_pin(unsigned short pin)
-{
-	unsigned long bit = GPIO_BIT(pin);
-	int ret = -EBUSY;	/* Already in use */
-
-	gpio_lock();
-
-	if (GPIO_ISBID(pin)) {
-		if (access_map[GPIO_INDEX] & bit)
-			goto out;
-		access_map[GPIO_INDEX] |= bit;
-
-	} else if (GPIO_ISRAM(pin)) {
-		if (access_map[GPIO_INDEX] & bit)
-			goto out;
-		access_map[GPIO_INDEX] |= bit;
-
-	} else if (GPIO_ISMUX(pin)) {
-		if (access_map[MUX_INDEX] & bit)
-			goto out;
-		access_map[MUX_INDEX] |= bit;
-
-	} else if (GPIO_ISOUT(pin)) {
-		if (access_map[OUTP_INDEX] & bit)
-			goto out;
-		access_map[OUTP_INDEX] |= bit;
-
-	} else if (GPIO_ISIN(pin)) {
-		if (access_map[INP_INDEX] & bit)
-			goto out;
-		access_map[INP_INDEX] |= bit;
-	} else
-		goto out;
-	ret = 0;
-
-out:
-	gpio_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_register_pin);
-
-int pnx4008_gpio_unregister_pin(unsigned short pin)
-{
-	unsigned long bit = GPIO_BIT(pin);
-	int ret = -EFAULT;	/* Not registered */
-
-	gpio_lock();
-
-	if (GPIO_ISBID(pin)) {
-		if (~access_map[GPIO_INDEX] & bit)
-			goto out;
-		access_map[GPIO_INDEX] &= ~bit;
-	} else if (GPIO_ISRAM(pin)) {
-		if (~access_map[GPIO_INDEX] & bit)
-			goto out;
-		access_map[GPIO_INDEX] &= ~bit;
-	} else if (GPIO_ISMUX(pin)) {
-		if (~access_map[MUX_INDEX] & bit)
-			goto out;
-		access_map[MUX_INDEX] &= ~bit;
-	} else if (GPIO_ISOUT(pin)) {
-		if (~access_map[OUTP_INDEX] & bit)
-			goto out;
-		access_map[OUTP_INDEX] &= ~bit;
-	} else if (GPIO_ISIN(pin)) {
-		if (~access_map[INP_INDEX] & bit)
-			goto out;
-		access_map[INP_INDEX] &= ~bit;
-	} else
-		goto out;
-	ret = 0;
-
-out:
-	gpio_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_unregister_pin);
-
-unsigned long pnx4008_gpio_read_pin(unsigned short pin)
-{
-	unsigned long ret = -EFAULT;
-	int gpio = GPIO_BIT_MASK(pin);
-	gpio_lock();
-	if (GPIO_ISOUT(pin)) {
-		ret = gpio_read_bit(PIO_OUTP_STATE, gpio);
-	} else if (GPIO_ISRAM(pin)) {
-		if (gpio_read_bit(PIO_DRV_STATE, gpio) == 0) {
-			ret = gpio_read_bit(PIO_SDINP_STATE, gpio);
-		}
-	} else if (GPIO_ISBID(pin)) {
-		ret = gpio_read_bit(PIO_DRV_STATE, gpio);
-		if (ret > 0)
-			ret = gpio_read_bit(PIO_OUTP_STATE, gpio);
-		else if (ret == 0)
-			ret =
-			    gpio_read_bit(PIO_INP_STATE, gpio_to_inp_map[gpio]);
-	} else if (GPIO_ISIN(pin)) {
-		ret = gpio_read_bit(PIO_INP_STATE, gpio);
-	}
-	gpio_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_read_pin);
-
-/* Write Value to output */
-int pnx4008_gpio_write_pin(unsigned short pin, int output)
-{
-	int gpio = GPIO_BIT_MASK(pin);
-	int ret = -EFAULT;
-
-	gpio_lock();
-	if (GPIO_ISOUT(pin)) {
-		printk( "writing '%x' to '%x'\n",
-				gpio, output ? PIO_OUTP_SET : PIO_OUTP_CLR );
-		ret = gpio_set_bit(output ? PIO_OUTP_SET : PIO_OUTP_CLR, gpio);
-	} else if (GPIO_ISRAM(pin)) {
-		if (gpio_read_bit(PIO_DRV_STATE, gpio) > 0)
-			ret = gpio_set_bit(output ? PIO_SDOUTP_SET :
-					   PIO_SDOUTP_CLR, gpio);
-	} else if (GPIO_ISBID(pin)) {
-		if (gpio_read_bit(PIO_DRV_STATE, gpio) > 0)
-			ret = gpio_set_bit(output ? PIO_OUTP_SET :
-					   PIO_OUTP_CLR, gpio);
-	}
-	gpio_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_write_pin);
-
-/* Value = 1 : Set GPIO pin as output */
-/* Value = 0 : Set GPIO pin as input */
-int pnx4008_gpio_set_pin_direction(unsigned short pin, int output)
-{
-	int gpio = GPIO_BIT_MASK(pin);
-	int ret = -EFAULT;
-
-	gpio_lock();
-	if (GPIO_ISBID(pin) || GPIO_ISRAM(pin)) {
-		ret = gpio_set_bit(output ? PIO_DRV_SET : PIO_DRV_CLR, gpio);
-	}
-	gpio_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_set_pin_direction);
-
-/* Read GPIO pin direction: 0= pin used as input, 1= pin used as output*/
-int pnx4008_gpio_read_pin_direction(unsigned short pin)
-{
-	int gpio = GPIO_BIT_MASK(pin);
-	int ret = -EFAULT;
-
-	gpio_lock();
-	if (GPIO_ISBID(pin) || GPIO_ISRAM(pin)) {
-		ret = gpio_read_bit(PIO_DRV_STATE, gpio);
-	}
-	gpio_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_read_pin_direction);
-
-/* Value = 1 : Set pin to muxed function  */
-/* Value = 0 : Set pin as GPIO */
-int pnx4008_gpio_set_pin_mux(unsigned short pin, int output)
-{
-	int gpio = GPIO_BIT_MASK(pin);
-	int ret = -EFAULT;
-
-	gpio_lock();
-	if (GPIO_ISBID(pin)) {
-		ret =
-		    gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR,
-				 gpio_to_mux_map[gpio]);
-	} else if (GPIO_ISOUT(pin)) {
-		ret =
-		    gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR,
-				 outp_to_mux_map[gpio]);
-	} else if (GPIO_ISMUX(pin)) {
-		ret = gpio_set_bit(output ? PIO_MUX_SET : PIO_MUX_CLR, gpio);
-	}
-	gpio_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_set_pin_mux);
-
-/* Read pin mux function: 0= pin used as GPIO, 1= pin used for muxed function*/
-int pnx4008_gpio_read_pin_mux(unsigned short pin)
-{
-	int gpio = GPIO_BIT_MASK(pin);
-	int ret = -EFAULT;
-
-	gpio_lock();
-	if (GPIO_ISBID(pin)) {
-		ret = gpio_read_bit(PIO_MUX_STATE, gpio_to_mux_map[gpio]);
-	} else if (GPIO_ISOUT(pin)) {
-		ret = gpio_read_bit(PIO_MUX_STATE, outp_to_mux_map[gpio]);
-	} else if (GPIO_ISMUX(pin)) {
-		ret = gpio_read_bit(PIO_MUX_STATE, gpio);
-	}
-	gpio_unlock();
-	return ret;
-}
-
-EXPORT_SYMBOL(pnx4008_gpio_read_pin_mux);
diff --git a/arch/arm/mach-pnx4008/i2c.c b/arch/arm/mach-pnx4008/i2c.c
deleted file mode 100644
index 550cfc2a1f2e..000000000000
--- a/arch/arm/mach-pnx4008/i2c.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * I2C initialization for PNX4008.
- *
- * Author: Vitaly Wool <vitalywool@gmail.com>
- *
- * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/i2c-pnx.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <mach/platform.h>
-#include <mach/irqs.h>
-
-static struct resource i2c0_resources[] = {
-	{
-		.start = PNX4008_I2C1_BASE,
-		.end = PNX4008_I2C1_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = I2C_1_INT,
-		.end = I2C_1_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource i2c1_resources[] = {
-	{
-		.start = PNX4008_I2C2_BASE,
-		.end = PNX4008_I2C2_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = I2C_2_INT,
-		.end = I2C_2_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource i2c2_resources[] = {
-	{
-		.start = PNX4008_USB_CONFIG_BASE + 0x300,
-		.end = PNX4008_USB_CONFIG_BASE + 0x300 + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = USB_I2C_INT,
-		.end = USB_I2C_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device i2c0_device = {
-	.name = "pnx-i2c.0",
-	.id = 0,
-	.resource = i2c0_resources,
-	.num_resources = ARRAY_SIZE(i2c0_resources),
-};
-
-static struct platform_device i2c1_device = {
-	.name = "pnx-i2c.1",
-	.id = 1,
-	.resource = i2c1_resources,
-	.num_resources = ARRAY_SIZE(i2c1_resources),
-};
-
-static struct platform_device i2c2_device = {
-	.name = "pnx-i2c.2",
-	.id = 2,
-	.resource = i2c2_resources,
-	.num_resources = ARRAY_SIZE(i2c2_resources),
-};
-
-static struct platform_device *devices[] __initdata = {
-	&i2c0_device,
-	&i2c1_device,
-	&i2c2_device,
-};
-
-void __init pnx4008_register_i2c_devices(void)
-{
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
diff --git a/arch/arm/mach-pnx4008/include/mach/clock.h b/arch/arm/mach-pnx4008/include/mach/clock.h
deleted file mode 100644
index 8d2a5ef52c90..000000000000
--- a/arch/arm/mach-pnx4008/include/mach/clock.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/clock.h
- *
- * Clock control driver for PNX4008 - header file
- *
- * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __PNX4008_CLOCK_H__
-#define __PNX4008_CLOCK_H__
-
-struct module;
-struct clk;
-
-#define PWRMAN_VA_BASE		IO_ADDRESS(PNX4008_PWRMAN_BASE)
-#define HCLKDIVCTRL_REG		(PWRMAN_VA_BASE + 0x40)
-#define PWRCTRL_REG		(PWRMAN_VA_BASE + 0x44)
-#define PLLCTRL_REG		(PWRMAN_VA_BASE + 0x48)
-#define OSC13CTRL_REG		(PWRMAN_VA_BASE + 0x4c)
-#define SYSCLKCTRL_REG		(PWRMAN_VA_BASE + 0x50)
-#define HCLKPLLCTRL_REG		(PWRMAN_VA_BASE + 0x58)
-#define USBCTRL_REG		(PWRMAN_VA_BASE + 0x64)
-#define SDRAMCLKCTRL_REG	(PWRMAN_VA_BASE + 0x68)
-#define MSCTRL_REG		(PWRMAN_VA_BASE + 0x80)
-#define BTCLKCTRL		(PWRMAN_VA_BASE + 0x84)
-#define DUMCLKCTRL_REG		(PWRMAN_VA_BASE + 0x90)
-#define I2CCLKCTRL_REG		(PWRMAN_VA_BASE + 0xac)
-#define KEYCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb0)
-#define TSCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb4)
-#define PWMCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb8)
-#define TIMCLKCTRL_REG		(PWRMAN_VA_BASE + 0xbc)
-#define SPICTRL_REG		(PWRMAN_VA_BASE + 0xc4)
-#define FLASHCLKCTRL_REG	(PWRMAN_VA_BASE + 0xc8)
-#define UART3CLK_REG		(PWRMAN_VA_BASE + 0xd0)
-#define UARTCLKCTRL_REG		(PWRMAN_VA_BASE + 0xe4)
-#define DMACLKCTRL_REG		(PWRMAN_VA_BASE + 0xe8)
-#define AUTOCLK_CTRL		(PWRMAN_VA_BASE + 0xec)
-#define JPEGCLKCTRL_REG		(PWRMAN_VA_BASE + 0xfc)
-
-#define AUDIOCONFIG_VA_BASE	IO_ADDRESS(PNX4008_AUDIOCONFIG_BASE)
-#define DSPPLLCTRL_REG		(AUDIOCONFIG_VA_BASE + 0x60)
-#define DSPCLKCTRL_REG		(AUDIOCONFIG_VA_BASE + 0x64)
-#define AUDIOCLKCTRL_REG	(AUDIOCONFIG_VA_BASE + 0x68)
-#define AUDIOPLLCTRL_REG	(AUDIOCONFIG_VA_BASE + 0x6C)
-
-#define USB_OTG_CLKCTRL_REG	IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xff4)
-
-#define VFP9CLKCTRL_REG		IO_ADDRESS(PNX4008_DEBUG_BASE)
-
-#define CLK_RATE_13MHZ 13000
-#define CLK_RATE_1MHZ 1000
-#define CLK_RATE_208MHZ 208000
-#define CLK_RATE_48MHZ 48000
-#define CLK_RATE_32KHZ 32
-
-#define PNX4008_UART_CLK CLK_RATE_13MHZ * 1000 /* in MHz */
-
-#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
deleted file mode 100644
index 469d60d97f5c..000000000000
--- a/arch/arm/mach-pnx4008/include/mach/debug-macro.S
+++ /dev/null
@@ -1,21 +0,0 @@
-/* arch/arm/mach-pnx4008/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart, rp, rv, tmp
-		mov	\rp, #0x00090000
-		add	\rv, \rp, #0xf4000000	@ virtual
-		add	\rp, \rp, #0x40000000	@ physical
-		.endm
-
-#define UART_SHIFT	2
-#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-pnx4008/include/mach/dma.h b/arch/arm/mach-pnx4008/include/mach/dma.h
deleted file mode 100644
index f094bf8bfb18..000000000000
--- a/arch/arm/mach-pnx4008/include/mach/dma.h
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- *  arch/arm/mach-pnx4008/include/mach/dma.h
- *
- *  PNX4008 DMA header file
- *
- *  Author:	Vitaly Wool
- *  Copyright:	MontaVista Software Inc. (c) 2005
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include "platform.h"
-
-#define MAX_DMA_CHANNELS	8
-
-#define DMAC_BASE		IO_ADDRESS(PNX4008_DMA_CONFIG_BASE)
-#define DMAC_INT_STAT		(DMAC_BASE + 0x0000)
-#define DMAC_INT_TC_STAT	(DMAC_BASE + 0x0004)
-#define DMAC_INT_TC_CLEAR	(DMAC_BASE + 0x0008)
-#define DMAC_INT_ERR_STAT	(DMAC_BASE + 0x000c)
-#define DMAC_INT_ERR_CLEAR	(DMAC_BASE + 0x0010)
-#define DMAC_SOFT_SREQ		(DMAC_BASE + 0x0024)
-#define DMAC_CONFIG		(DMAC_BASE + 0x0030)
-#define DMAC_Cx_SRC_ADDR(c)	(DMAC_BASE + 0x0100 + (c) * 0x20)
-#define DMAC_Cx_DEST_ADDR(c)	(DMAC_BASE + 0x0104 + (c) * 0x20)
-#define DMAC_Cx_LLI(c)		(DMAC_BASE + 0x0108 + (c) * 0x20)
-#define DMAC_Cx_CONTROL(c)	(DMAC_BASE + 0x010c + (c) * 0x20)
-#define DMAC_Cx_CONFIG(c)	(DMAC_BASE + 0x0110 + (c) * 0x20)
-
-enum {
-	WIDTH_BYTE = 0,
-	WIDTH_HWORD,
-	WIDTH_WORD
-};
-
-enum {
-	FC_MEM2MEM_DMA,
-	FC_MEM2PER_DMA,
-	FC_PER2MEM_DMA,
-	FC_PER2PER_DMA,
-	FC_PER2PER_DPER,
-	FC_MEM2PER_PER,
-	FC_PER2MEM_PER,
-	FC_PER2PER_SPER
-};
-
-enum {
-	DMA_INT_UNKNOWN = 0,
-	DMA_ERR_INT = 1,
-	DMA_TC_INT = 2,
-};
-
-enum {
-	DMA_BUFFER_ALLOCATED = 1,
-	DMA_HAS_LL = 2,
-};
-
-enum {
-	PER_CAM_DMA_1 = 0,
-	PER_NDF_FLASH = 1,
-	PER_MBX_SLAVE_FIFO = 2,
-	PER_SPI2_REC_XMIT = 3,
-	PER_MS_SD_RX_XMIT = 4,
-	PER_HS_UART_1_XMIT = 5,
-	PER_HS_UART_1_RX = 6,
-	PER_HS_UART_2_XMIT = 7,
-	PER_HS_UART_2_RX = 8,
-	PER_HS_UART_7_XMIT = 9,
-	PER_HS_UART_7_RX = 10,
-	PER_SPI1_REC_XMIT = 11,
-	PER_MLC_NDF_SREC = 12,
-	PER_CAM_DMA_2 = 13,
-	PER_PRNG_INFIFO = 14,
-	PER_PRNG_OUTFIFO = 15,
-};
-
-struct pnx4008_dma_ch_ctrl {
-	int tc_mask;
-	int cacheable;
-	int bufferable;
-	int priv_mode;
-	int di;
-	int si;
-	int dest_ahb1;
-	int src_ahb1;
-	int dwidth;
-	int swidth;
-	int dbsize;
-	int sbsize;
-	int tr_size;
-};
-
-struct pnx4008_dma_ch_config {
-	int halt;
-	int active;
-	int lock;
-	int itc;
-	int ie;
-	int flow_cntrl;
-	int dest_per;
-	int src_per;
-};
-
-struct pnx4008_dma_ll {
-	unsigned long src_addr;
-	unsigned long dest_addr;
-	u32 next_dma;
-	unsigned long ch_ctrl;
-	struct pnx4008_dma_ll *next;
-	int flags;
-	void *alloc_data;
-	int (*free) (void *);
-};
-
-struct pnx4008_dma_config {
-	int is_ll;
-	unsigned long src_addr;
-	unsigned long dest_addr;
-	unsigned long ch_ctrl;
-	unsigned long ch_cfg;
-	struct pnx4008_dma_ll *ll;
-	u32 ll_dma;
-	int flags;
-	void *alloc_data;
-	int (*free) (void *);
-};
-
-extern struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t *);
-extern void pnx4008_free_ll_entry(struct pnx4008_dma_ll *, dma_addr_t);
-extern void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll *);
-
-extern int pnx4008_request_channel(char *, int,
-				   void (*)(int, int, void *),
-				   void *);
-extern void pnx4008_free_channel(int);
-extern int pnx4008_config_dma(int, int, int);
-extern int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl *,
-				    unsigned long *);
-extern int pnx4008_dma_parse_control(unsigned long,
-				     struct pnx4008_dma_ch_ctrl *);
-extern int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config *,
-				   unsigned long *);
-extern int pnx4008_dma_parse_config(unsigned long,
-				    struct pnx4008_dma_ch_config *);
-extern int pnx4008_config_channel(int, struct pnx4008_dma_config *);
-extern int pnx4008_channel_get_config(int, struct pnx4008_dma_config *);
-extern int pnx4008_dma_ch_enable(int);
-extern int pnx4008_dma_ch_disable(int);
-extern int pnx4008_dma_ch_enabled(int);
-extern void pnx4008_dma_split_head_entry(struct pnx4008_dma_config *,
-					 struct pnx4008_dma_ch_ctrl *);
-extern void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll *,
-				       struct pnx4008_dma_ch_ctrl *);
-
-#endif				/* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-pnx4008/include/mach/entry-macro.S b/arch/arm/mach-pnx4008/include/mach/entry-macro.S
deleted file mode 100644
index 77a555846719..000000000000
--- a/arch/arm/mach-pnx4008/include/mach/entry-macro.S
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for PNX4008-based platforms
- *
- * 2005-2006 (c) MontaVista Software, Inc.
- * Author: Vitaly Wool <vwool@ru.mvista.com>
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include "platform.h"
-
-#define IO_BASE         0xF0000000
-#define IO_ADDRESS(x)  (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE)
-
-#define INTRC_MASK			0x00
-#define INTRC_RAW_STAT			0x04
-#define INTRC_STAT			0x08
-#define INTRC_POLAR			0x0C
-#define INTRC_ACT_TYPE			0x10
-#define INTRC_TYPE			0x14
-
-#define SIC1_BASE_INT   32
-#define SIC2_BASE_INT   64
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-/* decode the MIC interrupt numbers */
-		ldr	\base, =IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
-		ldr	\irqstat, [\base, #INTRC_STAT]
-
-		cmp	\irqstat,#1<<16
-		movhs	\irqnr,#16
-		movlo	\irqnr,#0
-		movhs	\irqstat,\irqstat,lsr#16
-		cmp	\irqstat,#1<<8
-		addhs	\irqnr,\irqnr,#8
-		movhs	\irqstat,\irqstat,lsr#8
-		cmp	\irqstat,#1<<4
-		addhs	\irqnr,\irqnr,#4
-		movhs	\irqstat,\irqstat,lsr#4
-		cmp	\irqstat,#1<<2
-		addhs	\irqnr,\irqnr,#2
-		movhs	\irqstat,\irqstat,lsr#2
-		cmp	\irqstat,#1<<1
-		addhs	\irqnr,\irqnr,#1
-
-/* was there an interrupt ? if not then drop out with EQ status */
-		teq	\irqstat,#0
-		beq	1003f
-
-/* and now check for extended IRQ reasons */
-		cmp	\irqnr,#1
-		bls	1003f
-		cmp	\irqnr,#30
-		blo	1002f
-
-/* IRQ 31,30  : High priority cascade IRQ handle */
-/* read the correct SIC */
-/* decoding status after compare : eq is 30 (SIC1) , ne is 31 (SIC2) */
-/* set the base IRQ number */
-		ldreq	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
-		moveq  \irqnr,#SIC1_BASE_INT
-		ldrne	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
-		movne   \irqnr,#SIC2_BASE_INT
-		ldr	\irqstat, [\base, #INTRC_STAT]
-		ldr	\tmp,	  [\base, #INTRC_TYPE]
-/* and with inverted mask : low priority interrupts  */
-		and	\irqstat,\irqstat,\tmp
-		b	1004f
-
-1003:
-/* IRQ 1,0  : Low priority cascade IRQ handle */
-/* read the correct SIC */
-/* decoding status after compare : eq is 1 (SIC2) , ne is 0 (SIC1)*/
-/* read the correct SIC */
-/* set the base IRQ number  */
-		ldrne	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
-		movne   \irqnr,#SIC1_BASE_INT
-		ldreq	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
-		moveq   \irqnr,#SIC2_BASE_INT
-		ldr	\irqstat, [\base, #INTRC_STAT]
-		ldr	\tmp,	  [\base, #INTRC_TYPE]
-/* and with inverted mask : low priority interrupts  */
-		bic	\irqstat,\irqstat,\tmp
-
-1004:
-
-		cmp	\irqstat,#1<<16
-		addhs	\irqnr,\irqnr,#16
-		movhs	\irqstat,\irqstat,lsr#16
-		cmp	\irqstat,#1<<8
-		addhs	\irqnr,\irqnr,#8
-		movhs	\irqstat,\irqstat,lsr#8
-		cmp	\irqstat,#1<<4
-		addhs	\irqnr,\irqnr,#4
-		movhs	\irqstat,\irqstat,lsr#4
-		cmp	\irqstat,#1<<2
-		addhs	\irqnr,\irqnr,#2
-		movhs	\irqstat,\irqstat,lsr#2
-		cmp	\irqstat,#1<<1
-		addhs	\irqnr,\irqnr,#1
-
-
-/* is irqstat not zero */
-
-1002:
-/* we assert that irqstat is not equal to zero and return ne status if true*/
-		teq	\irqstat,#0
-1003:
-		.endm
-
diff --git a/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h b/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h
deleted file mode 100644
index 41027dd7cf74..000000000000
--- a/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h
- *
- * PNX4008 GPIO driver - header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips:
- * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef _PNX4008_GPIO_H_
-#define _PNX4008_GPIO_H_
-
-
-/* Block numbers */
-#define GPIO_IN		(0)
-#define GPIO_OUT		(0x100)
-#define GPIO_BID		(0x200)
-#define GPIO_RAM		(0x300)
-#define GPIO_MUX		(0x400)
-
-#define GPIO_TYPE_MASK(K) ((K) & 0x700)
-
-/* INPUT GPIOs */
-/* GPI */
-#define GPI_00		(GPIO_IN | 0)
-#define GPI_01		(GPIO_IN | 1)
-#define GPI_02   	(GPIO_IN | 2)
-#define GPI_03 	 	(GPIO_IN | 3)
-#define GPI_04   	(GPIO_IN | 4)
-#define GPI_05   	(GPIO_IN | 5)
-#define GPI_06   	(GPIO_IN | 6)
-#define GPI_07   	(GPIO_IN | 7)
-#define GPI_08   	(GPIO_IN | 8)
-#define GPI_09   	(GPIO_IN | 9)
-#define U1_RX 		(GPIO_IN | 15)
-#define U2_HTCS 	(GPIO_IN | 16)
-#define U2_RX	 	(GPIO_IN | 17)
-#define U3_RX		(GPIO_IN | 18)
-#define U4_RX		(GPIO_IN | 19)
-#define U5_RX		(GPIO_IN | 20)
-#define U6_IRRX 	(GPIO_IN | 21)
-#define U7_HCTS 	(GPIO_IN | 22)
-#define U7_RX		(GPIO_IN | 23)
-/* MISC IN */
-#define SPI1_DATIN	(GPIO_IN | 25)
-#define DISP_SYNC	(GPIO_IN | 26)
-#define SPI2_DATIN	(GPIO_IN | 27)
-#define GPI_11  	(GPIO_IN | 28)
-
-#define GPIO_IN_MASK   0x1eff83ff
-
-/* OUTPUT GPIOs */
-/* GPO */
-#define GPO_00		(GPIO_OUT | 0)
-#define GPO_01   	(GPIO_OUT | 1)
-#define GPO_02   	(GPIO_OUT | 2)
-#define GPO_03 	 	(GPIO_OUT | 3)
-#define GPO_04   	(GPIO_OUT | 4)
-#define GPO_05   	(GPIO_OUT | 5)
-#define GPO_06   	(GPIO_OUT | 6)
-#define GPO_07   	(GPIO_OUT | 7)
-#define GPO_08		(GPIO_OUT | 8)
-#define GPO_09   	(GPIO_OUT | 9)
-#define GPO_10   	(GPIO_OUT | 10)
-#define GPO_11 	 	(GPIO_OUT | 11)
-#define GPO_12   	(GPIO_OUT | 12)
-#define GPO_13   	(GPIO_OUT | 13)
-#define GPO_14   	(GPIO_OUT | 14)
-#define GPO_15   	(GPIO_OUT | 15)
-#define GPO_16  	(GPIO_OUT | 16)
-#define GPO_17 	 	(GPIO_OUT | 17)
-#define GPO_18   	(GPIO_OUT | 18)
-#define GPO_19   	(GPIO_OUT | 19)
-#define GPO_20   	(GPIO_OUT | 20)
-#define GPO_21   	(GPIO_OUT | 21)
-#define GPO_22   	(GPIO_OUT | 22)
-#define GPO_23   	(GPIO_OUT | 23)
-
-#define GPIO_OUT_MASK   0xffffff
-
-/* BIDIRECTIONAL GPIOs */
-/* RAM pins */
-#define RAM_D19		(GPIO_RAM | 0)
-#define RAM_D20  	(GPIO_RAM | 1)
-#define RAM_D21  	(GPIO_RAM | 2)
-#define RAM_D22 	(GPIO_RAM | 3)
-#define RAM_D23  	(GPIO_RAM | 4)
-#define RAM_D24  	(GPIO_RAM | 5)
-#define RAM_D25  	(GPIO_RAM | 6)
-#define RAM_D26  	(GPIO_RAM | 7)
-#define RAM_D27		(GPIO_RAM | 8)
-#define RAM_D28  	(GPIO_RAM | 9)
-#define RAM_D29  	(GPIO_RAM | 10)
-#define RAM_D30 	(GPIO_RAM | 11)
-#define RAM_D31  	(GPIO_RAM | 12)
-
-#define GPIO_RAM_MASK   0x1fff
-
-/* I/O pins */
-#define GPIO_00  	(GPIO_BID | 25)
-#define GPIO_01 	(GPIO_BID | 26)
-#define GPIO_02  	(GPIO_BID | 27)
-#define GPIO_03  	(GPIO_BID | 28)
-#define GPIO_04 	(GPIO_BID | 29)
-#define GPIO_05  	(GPIO_BID | 30)
-
-#define GPIO_BID_MASK   0x7e000000
-
-/* Non-GPIO multiplexed PIOs. For multiplexing with GPIO, please use GPIO macros */
-#define GPIO_SDRAM_SEL 	(GPIO_MUX | 3)
-
-#define GPIO_MUX_MASK   0x8
-
-/* Extraction/assembly macros */
-#define GPIO_BIT_MASK(K) ((K) & 0x1F)
-#define GPIO_BIT(K) (1 << GPIO_BIT_MASK(K))
-#define GPIO_ISMUX(K) ((GPIO_TYPE_MASK(K) == GPIO_MUX) && (GPIO_BIT(K) & GPIO_MUX_MASK))
-#define GPIO_ISRAM(K) ((GPIO_TYPE_MASK(K) == GPIO_RAM) && (GPIO_BIT(K) & GPIO_RAM_MASK))
-#define GPIO_ISBID(K) ((GPIO_TYPE_MASK(K) == GPIO_BID) && (GPIO_BIT(K) & GPIO_BID_MASK))
-#define GPIO_ISOUT(K) ((GPIO_TYPE_MASK(K) == GPIO_OUT) && (GPIO_BIT(K) & GPIO_OUT_MASK))
-#define GPIO_ISIN(K)  ((GPIO_TYPE_MASK(K) == GPIO_IN) && (GPIO_BIT(K) & GPIO_IN_MASK))
-
-/* Start Enable Pin Interrupts - table 58 page 66 */
-
-#define SE_PIN_BASE_INT   32
-
-#define SE_U7_RX_INT            63
-#define SE_U7_HCTS_INT          62
-#define SE_BT_CLKREQ_INT        61
-#define SE_U6_IRRX_INT          60
-/*59 unused*/
-#define SE_U5_RX_INT            58
-#define SE_GPI_11_INT           57
-#define SE_U3_RX_INT            56
-#define SE_U2_HCTS_INT          55
-#define SE_U2_RX_INT            54
-#define SE_U1_RX_INT            53
-#define SE_DISP_SYNC_INT        52
-/*51 unused*/
-#define SE_SDIO_INT_N           50
-#define SE_MSDIO_START_INT      49
-#define SE_GPI_06_INT           48
-#define SE_GPI_05_INT           47
-#define SE_GPI_04_INT           46
-#define SE_GPI_03_INT           45
-#define SE_GPI_02_INT           44
-#define SE_GPI_01_INT           43
-#define SE_GPI_00_INT           42
-#define SE_SYSCLKEN_PIN_INT     41
-#define SE_SPI1_DATAIN_INT      40
-#define SE_GPI_07_INT           39
-#define SE_SPI2_DATAIN_INT      38
-#define SE_GPI_10_INT           37
-#define SE_GPI_09_INT           36
-#define SE_GPI_08_INT           35
-/*34-32 unused*/
-
-/* Start Enable Internal Interrupts - table 57 page 65 */
-
-#define SE_INT_BASE_INT   0
-
-#define SE_TS_IRQ               31
-#define SE_TS_P_INT             30
-#define SE_TS_AUX_INT           29
-/*27-28 unused*/
-#define SE_USB_AHB_NEED_CLK_INT 26
-#define SE_MSTIMER_INT          25
-#define SE_RTC_INT              24
-#define SE_USB_NEED_CLK_INT     23
-#define SE_USB_INT              22
-#define SE_USB_I2C_INT          21
-#define SE_USB_OTG_TIMER_INT    20
-#define SE_USB_OTG_ATX_INT_N    19
-/*18 unused*/
-#define SE_DSP_GPIO4_INT        17
-#define SE_KEY_IRQ              16
-#define SE_DSP_SLAVEPORT_INT    15
-#define SE_DSP_GPIO1_INT        14
-#define SE_DSP_GPIO0_INT        13
-#define SE_DSP_AHB_INT          12
-/*11-6 unused*/
-#define SE_GPIO_05_INT          5
-#define SE_GPIO_04_INT          4
-#define SE_GPIO_03_INT          3
-#define SE_GPIO_02_INT          2
-#define SE_GPIO_01_INT          1
-#define SE_GPIO_00_INT          0
-
-#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
-
-#define START_INT_ER_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_RSR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_SR_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_APR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
-
-extern int pnx4008_gpio_register_pin(unsigned short pin);
-extern int pnx4008_gpio_unregister_pin(unsigned short pin);
-extern unsigned long pnx4008_gpio_read_pin(unsigned short pin);
-extern int pnx4008_gpio_write_pin(unsigned short pin, int output);
-extern int pnx4008_gpio_set_pin_direction(unsigned short pin, int output);
-extern int pnx4008_gpio_read_pin_direction(unsigned short pin);
-extern int pnx4008_gpio_set_pin_mux(unsigned short pin, int output);
-extern int pnx4008_gpio_read_pin_mux(unsigned short pin);
-
-static inline void start_int_umask(u8 irq)
-{
-	__raw_writel(__raw_readl(START_INT_ER_REG(irq)) |
-		     START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
-}
-
-static inline void start_int_mask(u8 irq)
-{
-	__raw_writel(__raw_readl(START_INT_ER_REG(irq)) &
-		     ~START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
-}
-
-static inline void start_int_ack(u8 irq)
-{
-	__raw_writel(START_INT_REG_BIT(irq), START_INT_RSR_REG(irq));
-}
-
-static inline void start_int_set_falling_edge(u8 irq)
-{
-	__raw_writel(__raw_readl(START_INT_APR_REG(irq)) &
-		     ~START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
-}
-
-static inline void start_int_set_rising_edge(u8 irq)
-{
-	__raw_writel(__raw_readl(START_INT_APR_REG(irq)) |
-		     START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
-}
-
-#endif				/* _PNX4008_GPIO_H_ */
diff --git a/arch/arm/mach-pnx4008/include/mach/hardware.h b/arch/arm/mach-pnx4008/include/mach/hardware.h
deleted file mode 100644
index 7b98b828d368..000000000000
--- a/arch/arm/mach-pnx4008/include/mach/hardware.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/hardware.h
- *
- * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include <mach/platform.h>
-
-/* Start of virtual addresses for IO devices */
-#define IO_BASE         0xF0000000
-
-/* This macro relies on fact that for all HW i/o addresses bits 20-23 are 0 */
-#define IO_ADDRESS(x)  (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE)
-
-#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/irq.h b/arch/arm/mach-pnx4008/include/mach/irq.h
deleted file mode 100644
index 2a690ca33870..000000000000
--- a/arch/arm/mach-pnx4008/include/mach/irq.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/irq.h
- *
- * PNX4008 IRQ controller driver - header file
- * this one is used in entry-arnv.S as well so it cannot contain C code
- *
- * Copyright (c) 2005 Philips Semiconductors
- * Copyright (c) 2005 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#ifndef __PNX4008_IRQ_H__
-#define __PNX4008_IRQ_H__
-
-#define MIC_VA_BASE             IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
-#define SIC1_VA_BASE            IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
-#define SIC2_VA_BASE            IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
-
-/* Manual: Chapter 20, page 195 */
-
-#define INTC_BIT(irq) (1<< ((irq) & 0x1F))
-
-#define INTC_ER(irq)    IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x0 + (((irq)&(0x3<<5))<<9)))
-#define INTC_RSR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x4 + (((irq)&(0x3<<5))<<9)))
-#define INTC_SR(irq)    IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x8 + (((irq)&(0x3<<5))<<9)))
-#define INTC_APR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0xC + (((irq)&(0x3<<5))<<9)))
-#define INTC_ATR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x10 + (((irq)&(0x3<<5))<<9)))
-#define INTC_ITR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x14 + (((irq)&(0x3<<5))<<9)))
-
-#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
-
-#define START_INT_ER_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_RSR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_SR_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
-#define START_INT_APR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
-
-extern void __init pnx4008_init_irq(void);
-
-#endif /* __PNX4008_IRQ_H__ */
diff --git a/arch/arm/mach-pnx4008/include/mach/irqs.h b/arch/arm/mach-pnx4008/include/mach/irqs.h
deleted file mode 100644
index f6b33cf23ae2..000000000000
--- a/arch/arm/mach-pnx4008/include/mach/irqs.h
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/irqs.h
- *
- * PNX4008 IRQ controller driver - header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __PNX4008_IRQS_h__
-#define __PNX4008_IRQS_h__
-
-#define NR_IRQS         96
-
-/*Manual: table 259, page 199*/
-
-/*SUB2 Interrupt Routing (SIC2)*/
-
-#define SIC2_BASE_INT   64
-
-#define CLK_SWITCH_ARM_INT 95	/*manual: Clkswitch ARM  */
-#define CLK_SWITCH_DSP_INT 94	/*manual: ClkSwitch DSP  */
-#define CLK_SWITCH_AUD_INT 93	/*manual: Clkswitch AUD  */
-#define GPI_06_INT         92
-#define GPI_05_INT         91
-#define GPI_04_INT         90
-#define GPI_03_INT         89
-#define GPI_02_INT         88
-#define GPI_01_INT         87
-#define GPI_00_INT         86
-#define BT_CLKREQ_INT      85
-#define SPI1_DATIN_INT     84
-#define U5_RX_INT          83
-#define SDIO_INT_N         82
-#define CAM_HS_INT         81
-#define CAM_VS_INT         80
-#define GPI_07_INT         79
-#define DISP_SYNC_INT      78
-#define DSP_INT8           77
-#define U7_HCTS_INT        76
-#define GPI_10_INT         75
-#define GPI_09_INT         74
-#define GPI_08_INT         73
-#define DSP_INT7           72
-#define U2_HCTS_INT        71
-#define SPI2_DATIN_INT     70
-#define GPIO_05_INT        69
-#define GPIO_04_INT        68
-#define GPIO_03_INT        67
-#define GPIO_02_INT        66
-#define GPIO_01_INT        65
-#define GPIO_00_INT        64
-
-/*Manual: table 258, page 198*/
-
-/*SUB1 Interrupt Routing (SIC1)*/
-
-#define SIC1_BASE_INT   32
-
-#define USB_I2C_INT        63
-#define USB_DEV_HP_INT     62
-#define USB_DEV_LP_INT     61
-#define USB_DEV_DMA_INT    60
-#define USB_HOST_INT       59
-#define USB_OTG_ATX_INT_N  58
-#define USB_OTG_TIMER_INT  57
-#define SW_INT             56
-#define SPI1_INT           55
-#define KEY_IRQ            54
-#define DSP_M_INT          53
-#define RTC_INT            52
-#define I2C_1_INT          51
-#define I2C_2_INT          50
-#define PLL1_LOCK_INT      49
-#define PLL2_LOCK_INT      48
-#define PLL3_LOCK_INT      47
-#define PLL4_LOCK_INT      46
-#define PLL5_LOCK_INT      45
-#define SPI2_INT           44
-#define DSP_INT1           43
-#define DSP_INT2           42
-#define DSP_TDM_INT2       41
-#define TS_AUX_INT         40
-#define TS_IRQ             39
-#define TS_P_INT           38
-#define UOUT1_TO_PAD_INT   37
-#define GPI_11_INT         36
-#define DSP_INT4           35
-#define JTAG_COMM_RX_INT   34
-#define JTAG_COMM_TX_INT   33
-#define DSP_INT3           32
-
-/*Manual: table 257, page 197*/
-
-/*MAIN Interrupt Routing*/
-
-#define MAIN_BASE_INT   0
-
-#define SUB2_FIQ_N         31	/*active low */
-#define SUB1_FIQ_N         30	/*active low */
-#define JPEG_INT           29
-#define DMA_INT            28
-#define MSTIMER_INT        27
-#define IIR1_INT           26
-#define IIR2_INT           25
-#define IIR7_INT           24
-#define DSP_TDM_INT0       23
-#define DSP_TDM_INT1       22
-#define DSP_P_INT          21
-#define DSP_INT0           20
-#define DUM_INT            19
-#define UOUT0_TO_PAD_INT   18
-#define MP4_ENC_INT        17
-#define MP4_DEC_INT        16
-#define SD0_INT            15
-#define MBX_INT            14
-#define SD1_INT            13
-#define MS_INT_N           12
-#define FLASH_INT          11 /*NAND*/
-#define IIR6_INT           10
-#define IIR5_INT           9
-#define IIR4_INT           8
-#define IIR3_INT           7
-#define WATCH_INT          6
-#define HSTIMER_INT        5
-#define ARCH_TIMER_IRQ     HSTIMER_INT
-#define CAM_INT            4
-#define PRNG_INT           3
-#define CRYPTO_INT         2
-#define SUB2_IRQ_N         1	/*active low */
-#define SUB1_IRQ_N         0	/*active low */
-
-#define PNX4008_IRQ_TYPES \
-{                                           /*IRQ #'s: */         \
-IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, /*  0, 1, 2, 3 */     \
-IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /*  4, 5, 6, 7 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /*  8, 9,10,11 */     \
-IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 12,13,14,15 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 16,17,18,19 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 20,21,22,23 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 24,25,26,27 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  /* 28,29,30,31 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 32,33,34,35 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH, /* 36,37,38,39 */  \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 40,41,42,43 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 44,45,46,47 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  /* 48,49,50,51 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 52,53,54,55 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, /* 56,57,58,59 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 60,61,62,63 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 64,65,66,67 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 68,69,70,71 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 72,73,74,75 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 76,77,78,79 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 80,81,82,83 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 84,85,86,87 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 88,89,90,91 */     \
-IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 92,93,94,95 */     \
-}
-
-/* Start Enable Pin Interrupts - table 58 page 66 */
-
-#define SE_PIN_BASE_INT   32
-
-#define SE_U7_RX_INT            63
-#define SE_U7_HCTS_INT          62
-#define SE_BT_CLKREQ_INT        61
-#define SE_U6_IRRX_INT          60
-/*59 unused*/
-#define SE_U5_RX_INT            58
-#define SE_GPI_11_INT           57
-#define SE_U3_RX_INT            56
-#define SE_U2_HCTS_INT          55
-#define SE_U2_RX_INT            54
-#define SE_U1_RX_INT            53
-#define SE_DISP_SYNC_INT        52
-/*51 unused*/
-#define SE_SDIO_INT_N           50
-#define SE_MSDIO_START_INT      49
-#define SE_GPI_06_INT           48
-#define SE_GPI_05_INT           47
-#define SE_GPI_04_INT           46
-#define SE_GPI_03_INT           45
-#define SE_GPI_02_INT           44
-#define SE_GPI_01_INT           43
-#define SE_GPI_00_INT           42
-#define SE_SYSCLKEN_PIN_INT     41
-#define SE_SPI1_DATAIN_INT      40
-#define SE_GPI_07_INT           39
-#define SE_SPI2_DATAIN_INT      38
-#define SE_GPI_10_INT           37
-#define SE_GPI_09_INT           36
-#define SE_GPI_08_INT           35
-/*34-32 unused*/
-
-/* Start Enable Internal Interrupts - table 57 page 65 */
-
-#define SE_INT_BASE_INT   0
-
-#define SE_TS_IRQ               31
-#define SE_TS_P_INT             30
-#define SE_TS_AUX_INT           29
-/*27-28 unused*/
-#define SE_USB_AHB_NEED_CLK_INT 26
-#define SE_MSTIMER_INT          25
-#define SE_RTC_INT              24
-#define SE_USB_NEED_CLK_INT     23
-#define SE_USB_INT              22
-#define SE_USB_I2C_INT          21
-#define SE_USB_OTG_TIMER_INT    20
-
-#endif /* __PNX4008_IRQS_h__ */
diff --git a/arch/arm/mach-pnx4008/include/mach/param.h b/arch/arm/mach-pnx4008/include/mach/param.h
deleted file mode 100644
index 6ea02f2176b7..000000000000
--- a/arch/arm/mach-pnx4008/include/mach/param.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  arch/arm/mach-pnx4008/include/mach/param.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define HZ 100
diff --git a/arch/arm/mach-pnx4008/include/mach/platform.h b/arch/arm/mach-pnx4008/include/mach/platform.h
deleted file mode 100644
index 368c2c10a308..000000000000
--- a/arch/arm/mach-pnx4008/include/mach/platform.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/platform.h
- *
- * PNX4008 Base addresses - header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * Based on reference code received from Philips:
- * Copyright (C) 2003 Philips Semiconductors
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-
-#ifndef __ASM_ARCH_PLATFORM_H__
-#define __ASM_ARCH_PLATFORM_H__
-
-#define PNX4008_IRAM_BASE		0x08000000
-#define PNX4008_IRAM_SIZE		0x00010000
-#define PNX4008_YUV_SLAVE_BASE		0x10000000
-#define PNX4008_DUM_SLAVE_BASE		0x18000000
-#define PNX4008_NDF_FLASH_BASE		0x20020000
-#define PNX4008_SPI1_BASE		0x20088000
-#define PNX4008_SPI2_BASE		0x20090000
-#define PNX4008_SD_CONFIG_BASE		0x20098000
-#define PNX4008_FLASH_DATA		0x200B0000
-#define PNX4008_MLC_FLASH_BASE		0x200B8000
-#define PNX4008_JPEG_CONFIG_BASE	0x300A0000
-#define PNX4008_DMA_CONFIG_BASE		0x31000000
-#define PNX4008_USB_CONFIG_BASE		0x31020000
-#define PNX4008_SDRAM_CFG_BASE		0x31080000
-#define PNX4008_AHB2FAB_BASE		0x40000000
-#define PNX4008_PWRMAN_BASE		0x40004000
-#define PNX4008_INTCTRLMIC_BASE		0x40008000
-#define PNX4008_INTCTRLSIC1_BASE	0x4000C000
-#define PNX4008_INTCTRLSIC2_BASE	0x40010000
-#define PNX4008_HSUART1_BASE		0x40014000
-#define PNX4008_HSUART2_BASE		0x40018000
-#define PNX4008_HSUART7_BASE		0x4001C000
-#define PNX4008_RTC_BASE		0x40024000
-#define PNX4008_PIO_BASE		0x40028000
-#define PNX4008_MSTIMER_BASE		0x40034000
-#define PNX4008_HSTIMER_BASE		0x40038000
-#define PNX4008_WDOG_BASE		0x4003C000
-#define PNX4008_DEBUG_BASE		0x40040000
-#define PNX4008_TOUCH1_BASE		0x40048000
-#define PNX4008_KEYSCAN_BASE		0x40050000
-#define PNX4008_UARTCTRL_BASE		0x40054000
-#define PNX4008_PWM_BASE		0x4005C000
-#define PNX4008_UART3_BASE		0x40080000
-#define PNX4008_UART4_BASE		0x40088000
-#define PNX4008_UART5_BASE		0x40090000
-#define PNX4008_UART6_BASE		0x40098000
-#define PNX4008_I2C1_BASE		0x400A0000
-#define PNX4008_I2C2_BASE		0x400A8000
-#define PNX4008_MAGICGATE_BASE		0x400B0000
-#define PNX4008_DUMCONF_BASE		0x400B8000
-#define PNX4008_DUM_MAINCFG_BASE       	0x400BC000
-#define PNX4008_DSP_BASE		0x400C0000
-#define PNX4008_PROFCOUNTER_BASE	0x400C8000
-#define PNX4008_CRYPTO_BASE		0x400D0000
-#define PNX4008_CAMIFCONF_BASE		0x400D8000
-#define PNX4008_YUV2RGB_BASE		0x400E0000
-#define PNX4008_AUDIOCONFIG_BASE	0x400E8000
-
-#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/pm.h b/arch/arm/mach-pnx4008/include/mach/pm.h
deleted file mode 100644
index 2fa685bff858..000000000000
--- a/arch/arm/mach-pnx4008/include/mach/pm.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/pm.h
- *
- * PNX4008 Power Management Routiness - header file
- *
- * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASM_ARCH_PNX4008_PM_H
-#define __ASM_ARCH_PNX4008_PM_H
-
-#ifndef __ASSEMBLER__
-#include "irq.h"
-#include "irqs.h"
-#include "clock.h"
-
-extern void pnx4008_pm_idle(void);
-extern void pnx4008_pm_suspend(void);
-extern unsigned int pnx4008_cpu_suspend_sz;
-extern void pnx4008_cpu_suspend(void);
-extern unsigned int pnx4008_cpu_standby_sz;
-extern void pnx4008_cpu_standby(void);
-
-extern int pnx4008_startup_pll(struct clk *);
-extern int pnx4008_shutdown_pll(struct clk *);
-
-#endif				/* ASSEMBLER */
-#endif				/* __ASM_ARCH_PNX4008_PM_H */
diff --git a/arch/arm/mach-pnx4008/include/mach/timex.h b/arch/arm/mach-pnx4008/include/mach/timex.h
deleted file mode 100644
index b383c7de7ab4..000000000000
--- a/arch/arm/mach-pnx4008/include/mach/timex.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/timex.h
- *
- * PNX4008 timers header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __PNX4008_TIMEX_H
-#define __PNX4008_TIMEX_H
-
-#define CLOCK_TICK_RATE		1000000
-
-#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/uncompress.h b/arch/arm/mach-pnx4008/include/mach/uncompress.h
deleted file mode 100644
index bb4751ee2539..000000000000
--- a/arch/arm/mach-pnx4008/include/mach/uncompress.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  arch/arm/mach-pnx4008/include/mach/uncompress.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2006 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define UART5_BASE 0x40090000
-
-#define UART5_DR    (*(volatile unsigned char *) (UART5_BASE))
-#define UART5_FR    (*(volatile unsigned char *) (UART5_BASE + 18))
-
-static __inline__ void putc(char c)
-{
-	while (UART5_FR & (1 << 5))
-		barrier();
-
-	UART5_DR = c;
-}
-
-/*
- * This does not append a newline
- */
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-pnx4008/irq.c b/arch/arm/mach-pnx4008/irq.c
deleted file mode 100644
index 41e4201972d5..000000000000
--- a/arch/arm/mach-pnx4008/irq.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/irq.c
- *
- * PNX4008 IRQ controller driver
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * Based on reference code received from Philips:
- * Copyright (C) 2003 Philips Semiconductors
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-#include <mach/irq.h>
-
-static u8 pnx4008_irq_type[NR_IRQS] = PNX4008_IRQ_TYPES;
-
-static void pnx4008_mask_irq(struct irq_data *d)
-{
-	__raw_writel(__raw_readl(INTC_ER(d->irq)) & ~INTC_BIT(d->irq), INTC_ER(d->irq));	/* mask interrupt */
-}
-
-static void pnx4008_unmask_irq(struct irq_data *d)
-{
-	__raw_writel(__raw_readl(INTC_ER(d->irq)) | INTC_BIT(d->irq), INTC_ER(d->irq));	/* unmask interrupt */
-}
-
-static void pnx4008_mask_ack_irq(struct irq_data *d)
-{
-	__raw_writel(__raw_readl(INTC_ER(d->irq)) & ~INTC_BIT(d->irq), INTC_ER(d->irq));	/* mask interrupt */
-	__raw_writel(INTC_BIT(d->irq), INTC_SR(d->irq));	/* clear interrupt status */
-}
-
-static int pnx4008_set_irq_type(struct irq_data *d, unsigned int type)
-{
-	switch (type) {
-	case IRQ_TYPE_EDGE_RISING:
-		__raw_writel(__raw_readl(INTC_ATR(d->irq)) | INTC_BIT(d->irq), INTC_ATR(d->irq));	/*edge sensitive */
-		__raw_writel(__raw_readl(INTC_APR(d->irq)) | INTC_BIT(d->irq), INTC_APR(d->irq));	/*rising edge */
-		irq_set_handler(d->irq, handle_edge_irq);
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		__raw_writel(__raw_readl(INTC_ATR(d->irq)) | INTC_BIT(d->irq), INTC_ATR(d->irq));	/*edge sensitive */
-		__raw_writel(__raw_readl(INTC_APR(d->irq)) & ~INTC_BIT(d->irq), INTC_APR(d->irq));	/*falling edge */
-		irq_set_handler(d->irq, handle_edge_irq);
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-		__raw_writel(__raw_readl(INTC_ATR(d->irq)) & ~INTC_BIT(d->irq), INTC_ATR(d->irq));	/*level sensitive */
-		__raw_writel(__raw_readl(INTC_APR(d->irq)) & ~INTC_BIT(d->irq), INTC_APR(d->irq));	/*low level */
-		irq_set_handler(d->irq, handle_level_irq);
-		break;
-	case IRQ_TYPE_LEVEL_HIGH:
-		__raw_writel(__raw_readl(INTC_ATR(d->irq)) & ~INTC_BIT(d->irq), INTC_ATR(d->irq));	/*level sensitive */
-		__raw_writel(__raw_readl(INTC_APR(d->irq)) | INTC_BIT(d->irq), INTC_APR(d->irq));	/* high level */
-		irq_set_handler(d->irq, handle_level_irq);
-		break;
-
-	/* IRQ_TYPE_EDGE_BOTH is not supported */
-	default:
-		printk(KERN_ERR "PNX4008 IRQ: Unsupported irq type %d\n", type);
-		return -1;
-	}
-	return 0;
-}
-
-static struct irq_chip pnx4008_irq_chip = {
-	.irq_ack = pnx4008_mask_ack_irq,
-	.irq_mask = pnx4008_mask_irq,
-	.irq_unmask = pnx4008_unmask_irq,
-	.irq_set_type = pnx4008_set_irq_type,
-};
-
-void __init pnx4008_init_irq(void)
-{
-	unsigned int i;
-
-	/* configure IRQ's */
-	for (i = 0; i < NR_IRQS; i++) {
-		set_irq_flags(i, IRQF_VALID);
-		irq_set_chip(i, &pnx4008_irq_chip);
-		pnx4008_set_irq_type(irq_get_irq_data(i), pnx4008_irq_type[i]);
-	}
-
-	/* configure and enable IRQ 0,1,30,31 (cascade interrupts) */
-	pnx4008_set_irq_type(irq_get_irq_data(SUB1_IRQ_N),
-			     pnx4008_irq_type[SUB1_IRQ_N]);
-	pnx4008_set_irq_type(irq_get_irq_data(SUB2_IRQ_N),
-			     pnx4008_irq_type[SUB2_IRQ_N]);
-	pnx4008_set_irq_type(irq_get_irq_data(SUB1_FIQ_N),
-			     pnx4008_irq_type[SUB1_FIQ_N]);
-	pnx4008_set_irq_type(irq_get_irq_data(SUB2_FIQ_N),
-			     pnx4008_irq_type[SUB2_FIQ_N]);
-
-	/* mask all others */
-	__raw_writel((1 << SUB2_FIQ_N) | (1 << SUB1_FIQ_N) |
-			(1 << SUB2_IRQ_N) | (1 << SUB1_IRQ_N),
-		INTC_ER(MAIN_BASE_INT));
-	__raw_writel(0, INTC_ER(SIC1_BASE_INT));
-	__raw_writel(0, INTC_ER(SIC2_BASE_INT));
-}
-
diff --git a/arch/arm/mach-pnx4008/pm.c b/arch/arm/mach-pnx4008/pm.c
deleted file mode 100644
index 26f8d06b142a..000000000000
--- a/arch/arm/mach-pnx4008/pm.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/pm.c
- *
- * Power Management driver for PNX4008
- *
- * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/pm.h>
-#include <linux/rtc.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/suspend.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-#include <asm/cacheflush.h>
-
-#include <mach/hardware.h>
-#include <mach/pm.h>
-#include <mach/clock.h>
-
-#define SRAM_VA IO_ADDRESS(PNX4008_IRAM_BASE)
-
-static void *saved_sram;
-
-static struct clk *pll4_clk;
-
-static inline void pnx4008_standby(void)
-{
-	void (*pnx4008_cpu_standby_ptr) (void);
-
-	local_irq_disable();
-	local_fiq_disable();
-
-	clk_disable(pll4_clk);
-
-	/*saving portion of SRAM to be used by suspend function. */
-	memcpy(saved_sram, (void *)SRAM_VA, pnx4008_cpu_standby_sz);
-
-	/*make sure SRAM copy gets physically written into SDRAM.
-	   SDRAM will be placed into self-refresh during power down */
-	flush_cache_all();
-
-	/*copy suspend function into SRAM */
-	memcpy((void *)SRAM_VA, pnx4008_cpu_standby, pnx4008_cpu_standby_sz);
-
-	/*do suspend */
-	pnx4008_cpu_standby_ptr = (void *)SRAM_VA;
-	pnx4008_cpu_standby_ptr();
-
-	/*restoring portion of SRAM that was used by suspend function */
-	memcpy((void *)SRAM_VA, saved_sram, pnx4008_cpu_standby_sz);
-
-	clk_enable(pll4_clk);
-
-	local_fiq_enable();
-	local_irq_enable();
-}
-
-static inline void pnx4008_suspend(void)
-{
-	void (*pnx4008_cpu_suspend_ptr) (void);
-
-	local_irq_disable();
-	local_fiq_disable();
-
-	clk_disable(pll4_clk);
-
-	__raw_writel(0xffffffff, START_INT_RSR_REG(SE_PIN_BASE_INT));
-	__raw_writel(0xffffffff, START_INT_RSR_REG(SE_INT_BASE_INT));
-
-	/*saving portion of SRAM to be used by suspend function. */
-	memcpy(saved_sram, (void *)SRAM_VA, pnx4008_cpu_suspend_sz);
-
-	/*make sure SRAM copy gets physically written into SDRAM.
-	   SDRAM will be placed into self-refresh during power down */
-	flush_cache_all();
-
-	/*copy suspend function into SRAM */
-	memcpy((void *)SRAM_VA, pnx4008_cpu_suspend, pnx4008_cpu_suspend_sz);
-
-	/*do suspend */
-	pnx4008_cpu_suspend_ptr = (void *)SRAM_VA;
-	pnx4008_cpu_suspend_ptr();
-
-	/*restoring portion of SRAM that was used by suspend function */
-	memcpy((void *)SRAM_VA, saved_sram, pnx4008_cpu_suspend_sz);
-
-	clk_enable(pll4_clk);
-
-	local_fiq_enable();
-	local_irq_enable();
-}
-
-static int pnx4008_pm_enter(suspend_state_t state)
-{
-	switch (state) {
-	case PM_SUSPEND_STANDBY:
-		pnx4008_standby();
-		break;
-	case PM_SUSPEND_MEM:
-		pnx4008_suspend();
-		break;
-	}
-	return 0;
-}
-
-static int pnx4008_pm_valid(suspend_state_t state)
-{
-	return (state == PM_SUSPEND_STANDBY) ||
-	       (state == PM_SUSPEND_MEM);
-}
-
-static const struct platform_suspend_ops pnx4008_pm_ops = {
-	.enter = pnx4008_pm_enter,
-	.valid = pnx4008_pm_valid,
-};
-
-int __init pnx4008_pm_init(void)
-{
-	u32 sram_size_to_allocate;
-
-	pll4_clk = clk_get(0, "ck_pll4");
-	if (IS_ERR(pll4_clk)) {
-		printk(KERN_ERR
-		       "PM Suspend cannot acquire ARM(PLL4) clock control\n");
-		return PTR_ERR(pll4_clk);
-	}
-
-	if (pnx4008_cpu_standby_sz > pnx4008_cpu_suspend_sz)
-		sram_size_to_allocate = pnx4008_cpu_standby_sz;
-	else
-		sram_size_to_allocate = pnx4008_cpu_suspend_sz;
-
-	saved_sram = kmalloc(sram_size_to_allocate, GFP_ATOMIC);
-	if (!saved_sram) {
-		printk(KERN_ERR
-		       "PM Suspend: cannot allocate memory to save portion of SRAM\n");
-		clk_put(pll4_clk);
-		return -ENOMEM;
-	}
-
-	suspend_set_ops(&pnx4008_pm_ops);
-	return 0;
-}
diff --git a/arch/arm/mach-pnx4008/serial.c b/arch/arm/mach-pnx4008/serial.c
deleted file mode 100644
index 374c138ac1ac..000000000000
--- a/arch/arm/mach-pnx4008/serial.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- *  linux/arch/arm/mach-pnx4008/serial.c
- *
- *  PNX4008 UART initialization
- *
- *  Copyright:	MontaVista Software Inc. (c) 2005
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/io.h>
-
-#include <mach/platform.h>
-#include <mach/hardware.h>
-
-#include <linux/serial_core.h>
-#include <linux/serial_reg.h>
-
-#include <mach/gpio-pnx4008.h>
-#include <mach/clock.h>
-
-#define UART_3		0
-#define UART_4		1
-#define UART_5		2
-#define UART_6		3
-#define UART_UNKNOWN	(-1)
-
-#define UART3_BASE_VA	IO_ADDRESS(PNX4008_UART3_BASE)
-#define UART4_BASE_VA	IO_ADDRESS(PNX4008_UART4_BASE)
-#define UART5_BASE_VA	IO_ADDRESS(PNX4008_UART5_BASE)
-#define UART6_BASE_VA	IO_ADDRESS(PNX4008_UART6_BASE)
-
-#define UART_FCR_OFFSET		8
-#define UART_FIFO_SIZE		64
-
-void pnx4008_uart_init(void)
-{
-	u32 tmp;
-	int i = UART_FIFO_SIZE;
-
-	__raw_writel(0xC1, UART5_BASE_VA + UART_FCR_OFFSET);
-	__raw_writel(0xC1, UART3_BASE_VA + UART_FCR_OFFSET);
-
-	/* Send a NULL to fix the UART HW bug */
-	__raw_writel(0x00, UART5_BASE_VA);
-	__raw_writel(0x00, UART3_BASE_VA);
-
-	while (i--) {
-		tmp = __raw_readl(UART5_BASE_VA);
-		tmp = __raw_readl(UART3_BASE_VA);
-	}
-	__raw_writel(0, UART5_BASE_VA + UART_FCR_OFFSET);
-	__raw_writel(0, UART3_BASE_VA + UART_FCR_OFFSET);
-
-	/* setup wakeup interrupt */
-	start_int_set_rising_edge(SE_U3_RX_INT);
-	start_int_ack(SE_U3_RX_INT);
-	start_int_umask(SE_U3_RX_INT);
-
-	start_int_set_rising_edge(SE_U5_RX_INT);
-	start_int_ack(SE_U5_RX_INT);
-	start_int_umask(SE_U5_RX_INT);
-}
-
diff --git a/arch/arm/mach-pnx4008/sleep.S b/arch/arm/mach-pnx4008/sleep.S
deleted file mode 100644
index f4eed495d295..000000000000
--- a/arch/arm/mach-pnx4008/sleep.S
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * linux/arch/arm/mach-pnx4008/sleep.S
- *
- * PNX4008 support for STOP mode and SDRAM self-refresh
- *
- * Authors: Dmitry Chigirev, Vitaly Wool <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <mach/hardware.h>
-
-#define PWRMAN_VA_BASE IO_ADDRESS(PNX4008_PWRMAN_BASE)
-#define PWR_CTRL_REG_OFFS 0x44
-
-#define SDRAM_CFG_VA_BASE IO_ADDRESS(PNX4008_SDRAM_CFG_BASE)
-#define MPMC_STATUS_REG_OFFS 0x4
-
-		.text
-
-ENTRY(pnx4008_cpu_suspend)
-	@this function should be entered in Direct run mode.
-
-	@ save registers on stack
-	stmfd	sp!, {r0 - r6, lr}
-
-	@ setup Power Manager base address in r4
-	@ and put it's value in r5
-	mov	r4, #(PWRMAN_VA_BASE & 0xff000000)
-	orr	r4, r4, #(PWRMAN_VA_BASE & 0x00ff0000)
-	orr	r4, r4, #(PWRMAN_VA_BASE & 0x0000ff00)
-	orr	r4, r4, #(PWRMAN_VA_BASE & 0x000000ff)
-	ldr	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ setup SDRAM controller base address in r2
-	@ and put it's value in r3
-	mov	r2, #(SDRAM_CFG_VA_BASE & 0xff000000)
-	orr	r2, r2, #(SDRAM_CFG_VA_BASE & 0x00ff0000)
-	orr	r2, r2, #(SDRAM_CFG_VA_BASE & 0x0000ff00)
-	orr	r2, r2, #(SDRAM_CFG_VA_BASE & 0x000000ff)
-	ldr	r3, [r2, #MPMC_STATUS_REG_OFFS] @extra read - HW bug workaround
-
-	@ clear SDRAM self-refresh bit latch
-	and	r5, r5, #(~(1 << 8))
-	@ clear SDRAM self-refresh bit
-	and	r5, r5, #(~(1 << 9))
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ do save current bit settings in r1
-	mov	r1, r5
-
-	@ set SDRAM self-refresh bit
-	orr	r5, r5, #(1 << 9)
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ set SDRAM self-refresh bit latch
-	orr	r5, r5, #(1 << 8)
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ clear SDRAM self-refresh bit latch
-	and	r5, r5, #(~(1 << 8))
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ clear SDRAM self-refresh bit
-	and	r5, r5, #(~(1 << 9))
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ wait for SDRAM to get into self-refresh mode
-2:	ldr	r3, [r2, #MPMC_STATUS_REG_OFFS]
-	tst	r3, #(1 << 2)
-	beq	2b
-
-	@ to prepare SDRAM to get out of self-refresh mode after wakeup
-	orr	r5, r5, #(1 << 7)
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ do enter stop mode
-	orr	r5, r5, #(1 << 0)
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-
-	@ sleeping now...
-
-	@ coming out of STOP mode into Direct Run mode
-	@ clear STOP mode and SDRAM self-refresh bits
-	str	r1, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ wait for SDRAM to get out self-refresh mode
-3:	ldr	r3, [r2, #MPMC_STATUS_REG_OFFS]
-	tst	r3, #5
-	bne	3b
-
-	@ restore regs and return
-	ldmfd   sp!, {r0 - r6, pc}
-
-ENTRY(pnx4008_cpu_suspend_sz)
-	.word	. - pnx4008_cpu_suspend
-
-ENTRY(pnx4008_cpu_standby)
-	@ save registers on stack
-	stmfd	sp!, {r0 - r6, lr}
-
-	@ setup Power Manager base address in r4
-	@ and put it's value in r5
-	mov	r4, #(PWRMAN_VA_BASE & 0xff000000)
-	orr	r4, r4, #(PWRMAN_VA_BASE & 0x00ff0000)
-	orr	r4, r4, #(PWRMAN_VA_BASE & 0x0000ff00)
-	orr	r4, r4, #(PWRMAN_VA_BASE & 0x000000ff)
-	ldr	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ setup SDRAM controller base address in r2
-	@ and put it's value in r3
-	mov	r2, #(SDRAM_CFG_VA_BASE & 0xff000000)
-	orr	r2, r2, #(SDRAM_CFG_VA_BASE & 0x00ff0000)
-	orr	r2, r2, #(SDRAM_CFG_VA_BASE & 0x0000ff00)
-	orr	r2, r2, #(SDRAM_CFG_VA_BASE & 0x000000ff)
-	ldr	r3, [r2, #MPMC_STATUS_REG_OFFS] @extra read - HW bug workaround
-
-	@ clear SDRAM self-refresh bit latch
-	and	r5, r5, #(~(1 << 8))
-	@ clear SDRAM self-refresh bit
-	and	r5, r5, #(~(1 << 9))
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ do save current bit settings in r1
-	mov	r1, r5
-
-	@ set SDRAM self-refresh bit
-	orr	r5, r5, #(1 << 9)
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ set SDRAM self-refresh bit latch
-	orr	r5, r5, #(1 << 8)
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ clear SDRAM self-refresh bit latch
-	and	r5, r5, #(~(1 << 8))
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ clear SDRAM self-refresh bit
-	and	r5, r5, #(~(1 << 9))
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ wait for SDRAM to get into self-refresh mode
-2:	ldr	r3, [r2, #MPMC_STATUS_REG_OFFS]
-	tst	r3, #(1 << 2)
-	beq	2b
-
-	@ set 'get out of self-refresh mode after wakeup' bit
-	orr	r5, r5, #(1 << 7)
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	mcr     p15, 0, r0, c7, c0, 4	@ kinda sleeping now...
-
-	@ set SDRAM self-refresh bit latch
-	orr	r5, r5, #(1 << 8)
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ clear SDRAM self-refresh bit latch
-	and	r5, r5, #(~(1 << 8))
-	str	r5, [r4, #PWR_CTRL_REG_OFFS]
-
-	@ wait for SDRAM to get out self-refresh mode
-3:	ldr	r3, [r2, #MPMC_STATUS_REG_OFFS]
-	tst	r3, #5
-	bne	3b
-
-	@ restore regs and return
-	ldmfd   sp!, {r0 - r6, pc}
-
-ENTRY(pnx4008_cpu_standby_sz)
-	.word	. - pnx4008_cpu_standby
-
-ENTRY(pnx4008_cache_clean_invalidate)
-	stmfd	sp!, {r0 - r6, lr}
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	mcr	p15, 0, ip, c7, c6, 0		@ invalidate D cache
-#else
-1:	mrc	p15, 0, r15, c7, c14, 3		@ test,clean,invalidate
-	bne     1b
-#endif
-	ldmfd   sp!, {r0 - r6, pc}
diff --git a/arch/arm/mach-pnx4008/time.c b/arch/arm/mach-pnx4008/time.c
deleted file mode 100644
index 0cfe8af3d3be..000000000000
--- a/arch/arm/mach-pnx4008/time.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/time.c
- *
- * PNX4008 Timers
- *
- * Authors: Vitaly Wool, Dmitry Chigirev, Grigory Tolstolytkin <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-#include <linux/kallsyms.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach/time.h>
-#include <asm/errno.h>
-
-#include "time.h"
-
-/*! Note: all timers are UPCOUNTING */
-
-/*!
- * Returns number of us since last clock interrupt.  Note that interrupts
- * will have been disabled by do_gettimeoffset()
- */
-static unsigned long pnx4008_gettimeoffset(void)
-{
-	u32 ticks_to_match =
-	    __raw_readl(HSTIM_MATCH0) - __raw_readl(HSTIM_COUNTER);
-	u32 elapsed = LATCH - ticks_to_match;
-	return (elapsed * (tick_nsec / 1000)) / LATCH;
-}
-
-/*!
- * IRQ handler for the timer
- */
-static irqreturn_t pnx4008_timer_interrupt(int irq, void *dev_id)
-{
-	if (__raw_readl(HSTIM_INT) & MATCH0_INT) {
-
-		do {
-			timer_tick();
-
-			/*
-			 * this algorithm takes care of possible delay
-			 * for this interrupt handling longer than a normal
-			 * timer period
-			 */
-			__raw_writel(__raw_readl(HSTIM_MATCH0) + LATCH,
-				     HSTIM_MATCH0);
-			__raw_writel(MATCH0_INT, HSTIM_INT);	/* clear interrupt */
-
-			/*
-			 * The goal is to keep incrementing HSTIM_MATCH0
-			 * register until HSTIM_MATCH0 indicates time after
-			 * what HSTIM_COUNTER indicates.
-			 */
-		} while ((signed)
-			 (__raw_readl(HSTIM_MATCH0) -
-			  __raw_readl(HSTIM_COUNTER)) < 0);
-	}
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction pnx4008_timer_irq = {
-	.name = "PNX4008 Tick Timer",
-	.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler = pnx4008_timer_interrupt
-};
-
-/*!
- * Set up timer and timer interrupt.
- */
-static __init void pnx4008_setup_timer(void)
-{
-	__raw_writel(RESET_COUNT, MSTIM_CTRL);
-	while (__raw_readl(MSTIM_COUNTER)) ;	/* wait for reset to complete. 100% guarantee event */
-	__raw_writel(0, MSTIM_CTRL);	/* stop the timer */
-	__raw_writel(0, MSTIM_MCTRL);
-
-	__raw_writel(RESET_COUNT, HSTIM_CTRL);
-	while (__raw_readl(HSTIM_COUNTER)) ;	/* wait for reset to complete. 100% guarantee event */
-	__raw_writel(0, HSTIM_CTRL);
-	__raw_writel(0, HSTIM_MCTRL);
-	__raw_writel(0, HSTIM_CCR);
-	__raw_writel(12, HSTIM_PMATCH);	/* scale down to 1 MHZ */
-	__raw_writel(LATCH, HSTIM_MATCH0);
-	__raw_writel(MR0_INT, HSTIM_MCTRL);
-
-	setup_irq(HSTIMER_INT, &pnx4008_timer_irq);
-
-	__raw_writel(COUNT_ENAB | DEBUG_EN, HSTIM_CTRL);	/*start timer, stop when JTAG active */
-}
-
-/* Timer Clock Control in PM register */
-#define TIMCLK_CTRL_REG  IO_ADDRESS((PNX4008_PWRMAN_BASE + 0xBC))
-#define WATCHDOG_CLK_EN                   1
-#define TIMER_CLK_EN                      2	/* HS and MS timers? */
-
-static u32 timclk_ctrl_reg_save;
-
-void pnx4008_timer_suspend(void)
-{
-	timclk_ctrl_reg_save = __raw_readl(TIMCLK_CTRL_REG);
-	__raw_writel(0, TIMCLK_CTRL_REG);	/* disable timers */
-}
-
-void pnx4008_timer_resume(void)
-{
-	__raw_writel(timclk_ctrl_reg_save, TIMCLK_CTRL_REG);	/* enable timers */
-}
-
-struct sys_timer pnx4008_timer = {
-	.init = pnx4008_setup_timer,
-	.offset = pnx4008_gettimeoffset,
-	.suspend = pnx4008_timer_suspend,
-	.resume = pnx4008_timer_resume,
-};
-
diff --git a/arch/arm/mach-pnx4008/time.h b/arch/arm/mach-pnx4008/time.h
deleted file mode 100644
index 75e88c570aa7..000000000000
--- a/arch/arm/mach-pnx4008/time.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/timex.h
- *
- * PNX4008 timers header file
- *
- * Author: Dmitry Chigirev <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef PNX_TIME_H
-#define PNX_TIME_H
-
-#include <linux/io.h>
-#include <mach/hardware.h>
-
-#define TICKS2USECS(x)	(x)
-
-/* MilliSecond Timer - Chapter 21 Page 202 */
-
-#define MSTIM_INT     IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x0))
-#define MSTIM_CTRL    IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x4))
-#define MSTIM_COUNTER IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x8))
-#define MSTIM_MCTRL   IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x14))
-#define MSTIM_MATCH0  IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x18))
-#define MSTIM_MATCH1  IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x1c))
-
-/* High Speed Timer - Chpater 22, Page 205 */
-
-#define HSTIM_INT     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x0))
-#define HSTIM_CTRL    IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x4))
-#define HSTIM_COUNTER IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x8))
-#define HSTIM_PMATCH  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0xC))
-#define HSTIM_PCOUNT  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x10))
-#define HSTIM_MCTRL   IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x14))
-#define HSTIM_MATCH0  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x18))
-#define HSTIM_MATCH1  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x1c))
-#define HSTIM_MATCH2  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x20))
-#define HSTIM_CCR     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x28))
-#define HSTIM_CR0     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x2C))
-#define HSTIM_CR1     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x30))
-
-/* IMPORTANT: both timers are UPCOUNTING */
-
-/* xSTIM_MCTRL bit definitions */
-#define MR0_INT        1
-#define RESET_COUNT0   (1<<1)
-#define STOP_COUNT0    (1<<2)
-#define MR1_INT        (1<<3)
-#define RESET_COUNT1   (1<<4)
-#define STOP_COUNT1    (1<<5)
-#define MR2_INT        (1<<6)
-#define RESET_COUNT2   (1<<7)
-#define STOP_COUNT2    (1<<8)
-
-/* xSTIM_CTRL bit definitions */
-#define COUNT_ENAB     1
-#define RESET_COUNT    (1<<1)
-#define DEBUG_EN       (1<<2)
-
-/* xSTIM_INT bit definitions */
-#define MATCH0_INT     1
-#define MATCH1_INT     (1<<1)
-#define MATCH2_INT     (1<<2)
-#define RTC_TICK0      (1<<4)
-#define RTC_TICK1      (1<<5)
-
-#endif