diff options
| author | Martin Blumenstingl <martin.blumenstingl@googlemail.com> | 2016-09-04 20:23:20 +0200 |
|---|---|---|
| committer | Kevin Hilman <khilman@baylibre.com> | 2016-09-14 10:47:52 -0700 |
| commit | 42bede64c834e29fda0bd126c61ef61bc9d71278 (patch) | |
| tree | 0d0f99a88152bb9f1d38a977af679f3785a2b611 /arch/arm64 | |
| parent | 8f14a89305b53fdf18e04cf94a89cd5460423d69 (diff) | |
| download | linux-42bede64c834e29fda0bd126c61ef61bc9d71278.tar.gz linux-42bede64c834e29fda0bd126c61ef61bc9d71278.tar.bz2 linux-42bede64c834e29fda0bd126c61ef61bc9d71278.zip | |
ARM64: dts: meson-gxbb: use the new GXBB DWMAC glue driver
The Amlogic reference driver uses the "mc_val" devicetree property to
configure the PRG_ETHERNET_ADDR0 register. Unfortunately it uses magic
values for this configuration.
According to the datasheet the PRG_ETHERNET_ADDR0 register is at address
0xc8834108. However, the reference driver uses 0xc8834540 instead.
According to my tests, the value from the reference driver is correct.
No changes are required to the board dts files because the only
required configuration option is the phy-mode, which had to be
configured correctly before as well.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Diffstat (limited to 'arch/arm64')
| -rw-r--r-- | arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 8 |
1 files changed, 5 insertions, 3 deletions
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 3b181939f437..f76a3cdd1b2c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -500,13 +500,15 @@ }; ethmac: ethernet@c9410000 { - compatible = "amlogic,meson6-dwmac", "snps,dwmac"; + compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac"; reg = <0x0 0xc9410000 0x0 0x10000 0x0 0xc8834540 0x0 0x4>; interrupts = <0 8 1>; interrupt-names = "macirq"; - clocks = <&clkc CLKID_ETH>; - clock-names = "stmmaceth"; + clocks = <&clkc CLKID_ETH>, + <&clkc CLKID_FCLK_DIV2>, + <&clkc CLKID_MPLL2>; + clock-names = "stmmaceth", "clkin0", "clkin1"; phy-mode = "rgmii"; status = "disabled"; }; |