summaryrefslogtreecommitdiffstats
path: root/arch/arm
diff options
context:
space:
mode:
authorOlof Johansson <olof@lixom.net>2014-05-21 22:19:27 -0700
committerOlof Johansson <olof@lixom.net>2014-05-21 22:19:27 -0700
commit767bf9f00ec753a3bba653844d7b858b8720707f (patch)
treed608fe4eccea8de5662389872599bc6c0930ebfb /arch/arm
parentd1d70e5dc2cfa9047bb935c41ba808ebb8135696 (diff)
parent4b353a706a86598ba47307c47301c3c428b79e09 (diff)
downloadlinux-767bf9f00ec753a3bba653844d7b858b8720707f.tar.gz
linux-767bf9f00ec753a3bba653844d7b858b8720707f.tar.bz2
linux-767bf9f00ec753a3bba653844d7b858b8720707f.zip
Merge tag 'omap-for-v3.15/fixes-v3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Pull "omap fixes for v3.15-rc cycle" from Tony Lindgren: Regression fixes for omaps for NAND, DMA, cpu_idle and audio. Also a minor one line fix for audio clock on 54xx. * tag 'omap-for-v3.15/fixes-v3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP4: Fix the boot regression with CPU_IDLE enabled ARM: OMAP2+: Fix DMA hang after off-idle ARM: OMAP2+: nand: Fix NAND on OMAP2 and OMAP3 boards ARM: omap5: hwmod_data: Correct IDLEMODE for McPDM ARM: OMAP3: clock: Back-propagate rate change from cam_mclk to dpll4_m5 on all OMAP3 platforms Signed-off-by: Olof Johansson <olof@lixom.net>
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/mach-omap2/board-flash.c2
-rw-r--r--arch/arm/mach-omap2/cclock3xxx_data.c3
-rw-r--r--arch/arm/mach-omap2/cpuidle44xx.c25
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_54xx_data.c2
-rw-r--r--arch/arm/plat-omap/dma.c10
5 files changed, 35 insertions, 7 deletions
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index ac82512b9c8c..b6885e42c0a0 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -142,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
board_nand_data.nr_parts = nr_parts;
board_nand_data.devsize = nand_type;
- board_nand_data.ecc_opt = OMAP_ECC_BCH8_CODE_HW;
+ board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_HW;
gpmc_nand_init(&board_nand_data, gpmc_t);
}
#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c
index 8f5121b89688..eb8c75ec3b1a 100644
--- a/arch/arm/mach-omap2/cclock3xxx_data.c
+++ b/arch/arm/mach-omap2/cclock3xxx_data.c
@@ -456,7 +456,8 @@ static struct clk_hw_omap dpll4_m5x2_ck_hw = {
.clkdm_name = "dpll4_clkdm",
};
-DEFINE_STRUCT_CLK(dpll4_m5x2_ck, dpll4_m5x2_ck_parent_names, dpll4_m5x2_ck_ops);
+DEFINE_STRUCT_CLK_FLAGS(dpll4_m5x2_ck, dpll4_m5x2_ck_parent_names,
+ dpll4_m5x2_ck_ops, CLK_SET_RATE_PARENT);
static struct clk dpll4_m5x2_ck_3630 = {
.name = "dpll4_m5x2_ck",
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index 01fc710c8181..2498ab025fa2 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -14,6 +14,7 @@
#include <linux/cpuidle.h>
#include <linux/cpu_pm.h>
#include <linux/export.h>
+#include <linux/clockchips.h>
#include <asm/cpuidle.h>
#include <asm/proc-fns.h>
@@ -83,6 +84,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
{
struct idle_statedata *cx = state_ptr + index;
u32 mpuss_can_lose_context = 0;
+ int cpu_id = smp_processor_id();
/*
* CPU0 has to wait and stay ON until CPU1 is OFF state.
@@ -110,6 +112,8 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
mpuss_can_lose_context = (cx->mpu_state == PWRDM_POWER_RET) &&
(cx->mpu_logic_state == PWRDM_POWER_OFF);
+ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu_id);
+
/*
* Call idle CPU PM enter notifier chain so that
* VFP and per CPU interrupt context is saved.
@@ -165,6 +169,8 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
if (dev->cpu == 0 && mpuss_can_lose_context)
cpu_cluster_pm_exit();
+ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu_id);
+
fail:
cpuidle_coupled_parallel_barrier(dev, &abort_barrier);
cpu_done[dev->cpu] = false;
@@ -172,6 +178,16 @@ fail:
return index;
}
+/*
+ * For each cpu, setup the broadcast timer because local timers
+ * stops for the states above C1.
+ */
+static void omap_setup_broadcast_timer(void *arg)
+{
+ int cpu = smp_processor_id();
+ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu);
+}
+
static struct cpuidle_driver omap4_idle_driver = {
.name = "omap4_idle",
.owner = THIS_MODULE,
@@ -189,8 +205,7 @@ static struct cpuidle_driver omap4_idle_driver = {
/* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */
.exit_latency = 328 + 440,
.target_residency = 960,
- .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED |
- CPUIDLE_FLAG_TIMER_STOP,
+ .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED,
.enter = omap_enter_idle_coupled,
.name = "C2",
.desc = "CPUx OFF, MPUSS CSWR",
@@ -199,8 +214,7 @@ static struct cpuidle_driver omap4_idle_driver = {
/* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */
.exit_latency = 460 + 518,
.target_residency = 1100,
- .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED |
- CPUIDLE_FLAG_TIMER_STOP,
+ .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED,
.enter = omap_enter_idle_coupled,
.name = "C3",
.desc = "CPUx OFF, MPUSS OSWR",
@@ -231,5 +245,8 @@ int __init omap4_idle_init(void)
if (!cpu_clkdm[0] || !cpu_clkdm[1])
return -ENODEV;
+ /* Configure the broadcast timer on each cpu */
+ on_each_cpu(omap_setup_broadcast_timer, NULL, 1);
+
return cpuidle_register(&omap4_idle_driver, cpu_online_mask);
}
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index 892317294fdc..e829664e6a6c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -895,7 +895,7 @@ static struct omap_hwmod omap54xx_mcpdm_hwmod = {
* current exception.
*/
- .flags = HWMOD_EXT_OPT_MAIN_CLK,
+ .flags = HWMOD_EXT_OPT_MAIN_CLK | HWMOD_SWSUP_SIDLE,
.main_clk = "pad_clks_ck",
.prcm = {
.omap4 = {
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 5f5b975887fc..b5608b1f9fbd 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -70,6 +70,7 @@ static u32 errata;
static struct omap_dma_global_context_registers {
u32 dma_irqenable_l0;
+ u32 dma_irqenable_l1;
u32 dma_ocp_sysconfig;
u32 dma_gcr;
} omap_dma_global_context;
@@ -1973,10 +1974,17 @@ static struct irqaction omap24xx_dma_irq;
/*----------------------------------------------------------------------------*/
+/*
+ * Note that we are currently using only IRQENABLE_L0 and L1.
+ * As the DSP may be using IRQENABLE_L2 and L3, let's not
+ * touch those for now.
+ */
void omap_dma_global_context_save(void)
{
omap_dma_global_context.dma_irqenable_l0 =
p->dma_read(IRQENABLE_L0, 0);
+ omap_dma_global_context.dma_irqenable_l1 =
+ p->dma_read(IRQENABLE_L1, 0);
omap_dma_global_context.dma_ocp_sysconfig =
p->dma_read(OCP_SYSCONFIG, 0);
omap_dma_global_context.dma_gcr = p->dma_read(GCR, 0);
@@ -1991,6 +1999,8 @@ void omap_dma_global_context_restore(void)
OCP_SYSCONFIG, 0);
p->dma_write(omap_dma_global_context.dma_irqenable_l0,
IRQENABLE_L0, 0);
+ p->dma_write(omap_dma_global_context.dma_irqenable_l1,
+ IRQENABLE_L1, 0);
if (IS_DMA_ERRATA(DMA_ROMCODE_BUG))
p->dma_write(0x3 , IRQSTATUS_L0, 0);