can: flexcan: Use a regulator to control the CAN transceiver

Instead of using a GPIO to turn on/off the CAN transceiver, it is better to
use a regulator as some systems may use a PMIC to power the CAN transceiver.

Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

2 files changed, 13 insertions, 49 deletions

diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 3637bf3b1d59..1f0d38d7b16f 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -155,12 +155,14 @@
 			can0: can@80032000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&can0_pins_a>;
+				xceiver-supply = <&reg_can_3v3>;
 				status = "okay";
 			};
 
 			can1: can@80034000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&can1_pins_a>;
+				xceiver-supply = <&reg_can_3v3>;
 				status = "okay";
 			};
 		};
@@ -319,6 +321,16 @@
 			gpio = <&gpio3 30 0>;
 			enable-active-high;
 		};
+
+		reg_can_3v3: can-3v3 {
+			compatible = "regulator-fixed";
+			regulator-name = "can-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio2 13 0>;
+			enable-active-high;
+		};
+
 	};
 
 	sound {
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 5b62b6489d4b..97b8a44101cd 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -14,7 +14,6 @@
 #include <linux/clk/mxs.h>
 #include <linux/clkdev.h>
 #include <linux/clocksource.h>
-#include <linux/can/platform/flexcan.h>
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
@@ -60,41 +59,6 @@ static inline void __mxs_togl(u32 mask, void __iomem *reg)
 	__raw_writel(mask, reg + MXS_TOG_ADDR);
 }
 
-/*
- * MX28EVK_FLEXCAN_SWITCH is shared between both flexcan controllers
- */
-#define MX28EVK_FLEXCAN_SWITCH	MXS_GPIO_NR(2, 13)
-
-static int flexcan0_en, flexcan1_en;
-
-static void mx28evk_flexcan_switch(void)
-{
-	if (flexcan0_en || flexcan1_en)
-		gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 1);
-	else
-		gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 0);
-}
-
-static void mx28evk_flexcan0_switch(int enable)
-{
-	flexcan0_en = enable;
-	mx28evk_flexcan_switch();
-}
-
-static void mx28evk_flexcan1_switch(int enable)
-{
-	flexcan1_en = enable;
-	mx28evk_flexcan_switch();
-}
-
-static struct flexcan_platform_data flexcan_pdata[2];
-
-static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80032000, NULL, &flexcan_pdata[0]),
-	OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80034000, NULL, &flexcan_pdata[1]),
-	{ /* sentinel */ }
-};
-
 #define OCOTP_WORD_OFFSET		0x20
 #define OCOTP_WORD_COUNT		0x20
 
@@ -254,15 +218,6 @@ static void __init imx28_evk_init(void)
 	mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
 }
 
-static void __init imx28_evk_post_init(void)
-{
-	if (!gpio_request_one(MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT,
-			      "flexcan-switch")) {
-		flexcan_pdata[0].transceiver_switch = mx28evk_flexcan0_switch;
-		flexcan_pdata[1].transceiver_switch = mx28evk_flexcan1_switch;
-	}
-}
-
 static int apx4devkit_phy_fixup(struct phy_device *phy)
 {
 	phy->dev_flags |= MICREL_PHY_50MHZ_CLK;
@@ -374,13 +329,10 @@ static void __init mxs_machine_init(void)
 		cfa10049_init();
 
 	of_platform_populate(NULL, of_default_bus_match_table,
-			     mxs_auxdata_lookup, NULL);
+			     NULL, NULL);
 
 	if (of_machine_is_compatible("karo,tx28"))
 		tx28_post_init();
-
-	if (of_machine_is_compatible("fsl,imx28-evk"))
-		imx28_evk_post_init();
 }
 
 #define MX23_CLKCTRL_RESET_OFFSET	0x120