summaryrefslogtreecommitdiffstats
path: root/arch/arm
diff options
context:
space:
mode:
authorStephen Boyd <sboyd@codeaurora.org>2015-03-13 11:09:34 -0700
committerKumar Gala <galak@codeaurora.org>2015-03-27 11:31:02 -0500
commitc0c89fafa289ea241ba3fb22d6f583f8089a719e (patch)
tree43e48055d1330a7fece805554b87f372d63e718d /arch/arm
parent9eccca0843205f87c00404b663188b88eb248051 (diff)
downloadlinux-c0c89fafa289ea241ba3fb22d6f583f8089a719e.tar.gz
linux-c0c89fafa289ea241ba3fb22d6f583f8089a719e.tar.bz2
linux-c0c89fafa289ea241ba3fb22d6f583f8089a719e.zip
ARM: Remove mach-msm and associated ARM architecture code
The maintainers for mach-msm no longer have any plans to support or test the platforms supported by this architecture[1]. Most likely there aren't any active users of this code anyway, so let's delete it. [1] http://lkml.kernel.org/r/20150307031212.GA8434@fifo99.com Cc: David Brown <davidb@codeaurora.org> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kumar Gala <galak@codeaurora.org>
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/Kconfig14
-rw-r--r--arch/arm/Kconfig.debug29
-rw-r--r--arch/arm/Makefile2
-rw-r--r--arch/arm/configs/msm_defconfig121
-rw-r--r--arch/arm/include/debug/msm.S14
-rw-r--r--arch/arm/mach-msm/Kconfig109
-rw-r--r--arch/arm/mach-msm/Makefile23
-rw-r--r--arch/arm/mach-msm/Makefile.boot3
-rw-r--r--arch/arm/mach-msm/board-halibut.c110
-rw-r--r--arch/arm/mach-msm/board-msm7x30.c191
-rw-r--r--arch/arm/mach-msm/board-qsd8x50.c254
-rw-r--r--arch/arm/mach-msm/board-sapphire.c114
-rw-r--r--arch/arm/mach-msm/board-trout-gpio.c233
-rw-r--r--arch/arm/mach-msm/board-trout-mmc.c185
-rw-r--r--arch/arm/mach-msm/board-trout-panel.c292
-rw-r--r--arch/arm/mach-msm/board-trout.c111
-rw-r--r--arch/arm/mach-msm/board-trout.h162
-rw-r--r--arch/arm/mach-msm/clock-pcom.c176
-rw-r--r--arch/arm/mach-msm/clock-pcom.h145
-rw-r--r--arch/arm/mach-msm/clock.c28
-rw-r--r--arch/arm/mach-msm/clock.h43
-rw-r--r--arch/arm/mach-msm/common.h41
-rw-r--r--arch/arm/mach-msm/devices-msm7x00.c480
-rw-r--r--arch/arm/mach-msm/devices-msm7x30.c246
-rw-r--r--arch/arm/mach-msm/devices-qsd8x50.c388
-rw-r--r--arch/arm/mach-msm/devices.h53
-rw-r--r--arch/arm/mach-msm/dma.c298
-rw-r--r--arch/arm/mach-msm/gpiomux-8x50.c51
-rw-r--r--arch/arm/mach-msm/gpiomux-v1.h67
-rw-r--r--arch/arm/mach-msm/gpiomux.c111
-rw-r--r--arch/arm/mach-msm/gpiomux.h84
-rw-r--r--arch/arm/mach-msm/include/mach/clk.h31
-rw-r--r--arch/arm/mach-msm/include/mach/dma.h151
-rw-r--r--arch/arm/mach-msm/include/mach/entry-macro.S36
-rw-r--r--arch/arm/mach-msm/include/mach/hardware.h18
-rw-r--r--arch/arm/mach-msm/include/mach/irqs-7x00.h75
-rw-r--r--arch/arm/mach-msm/include/mach/irqs-7x30.h153
-rw-r--r--arch/arm/mach-msm/include/mach/irqs-8x50.h88
-rw-r--r--arch/arm/mach-msm/include/mach/irqs.h37
-rw-r--r--arch/arm/mach-msm/include/mach/msm_gpiomux.h38
-rw-r--r--arch/arm/mach-msm/include/mach/msm_iomap-7x00.h108
-rw-r--r--arch/arm/mach-msm/include/mach/msm_iomap-7x30.h103
-rw-r--r--arch/arm/mach-msm/include/mach/msm_iomap-8x50.h125
-rw-r--r--arch/arm/mach-msm/include/mach/msm_iomap.h53
-rw-r--r--arch/arm/mach-msm/include/mach/msm_smd.h109
-rw-r--r--arch/arm/mach-msm/include/mach/sirc.h98
-rw-r--r--arch/arm/mach-msm/include/mach/vreg.h29
-rw-r--r--arch/arm/mach-msm/io.c161
-rw-r--r--arch/arm/mach-msm/irq-vic.c363
-rw-r--r--arch/arm/mach-msm/irq.c151
-rw-r--r--arch/arm/mach-msm/last_radio_log.c71
-rw-r--r--arch/arm/mach-msm/proc_comm.c129
-rw-r--r--arch/arm/mach-msm/proc_comm.h258
-rw-r--r--arch/arm/mach-msm/sirc.c172
-rw-r--r--arch/arm/mach-msm/smd.c1034
-rw-r--r--arch/arm/mach-msm/smd_debug.c311
-rw-r--r--arch/arm/mach-msm/smd_private.h403
-rw-r--r--arch/arm/mach-msm/vreg.c220
58 files changed, 4 insertions, 8699 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9f1f09a2bc9b..adc85072bd29 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -625,18 +625,6 @@ config ARCH_PXA
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
-config ARCH_MSM
- bool "Qualcomm MSM (non-multiplatform)"
- select ARCH_REQUIRE_GPIOLIB
- select COMMON_CLK
- select GENERIC_CLOCKEVENTS
- help
- Support for Qualcomm MSM/QSD based systems. This runs on the
- apps processor of the MSM/QSD and depends on a shared memory
- interface to the modem processor which runs the baseband
- stack and controls some vital subsystems
- (clock and power control, etc).
-
config ARCH_SHMOBILE_LEGACY
bool "Renesas ARM SoCs (non-multiplatform)"
select ARCH_SHMOBILE
@@ -890,8 +878,6 @@ source "arch/arm/mach-ks8695/Kconfig"
source "arch/arm/mach-meson/Kconfig"
-source "arch/arm/mach-msm/Kconfig"
-
source "arch/arm/mach-moxart/Kconfig"
source "arch/arm/mach-mv78xx0/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 970de7518341..b010202043c5 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -448,25 +448,6 @@ choice
Say Y here if you want kernel low-level debugging support
on MMP UART3.
- config DEBUG_MSM_UART
- bool "Kernel low-level debugging messages via MSM UART"
- depends on ARCH_MSM
- help
- Say Y here if you want the debug print routines to direct
- their output to the serial port on MSM devices.
-
- ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT #
- MSM7X00A, QSD8X50 0xa9a00000 0xe1000000 UART1
- MSM7X00A, QSD8X50 0xa9b00000 0xe1000000 UART2
- MSM7X00A, QSD8X50 0xa9c00000 0xe1000000 UART3
-
- MSM7X30 0xaca00000 0xe1000000 UART1
- MSM7X30 0xacb00000 0xe1000000 UART2
- MSM7X30 0xacc00000 0xe1000000 UART3
-
- Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
- options based on your needs.
-
config DEBUG_QCOM_UARTDM
bool "Kernel low-level debugging messages via QCOM UARTDM"
depends on ARCH_QCOM
@@ -1295,7 +1276,7 @@ config DEBUG_LL_INCLUDE
DEBUG_IMX6SL_UART || \
DEBUG_IMX6SX_UART
default "debug/ks8695.S" if DEBUG_KS8695_UART
- default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
+ default "debug/msm.S" if DEBUG_QCOM_UARTDM
default "debug/netx.S" if DEBUG_NETX_UART
default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2
@@ -1388,7 +1369,6 @@ config DEBUG_UART_PHYS
default 0x80230000 if DEBUG_PICOXCELL_UART
default 0x808c0000 if ARCH_EP93XX
default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
- default 0xa9a00000 if DEBUG_MSM_UART
default 0xb0060000 if DEBUG_SIRFPRIMA2_UART1
default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
default 0xc0013000 if DEBUG_U300_UART
@@ -1433,7 +1413,7 @@ config DEBUG_UART_PHYS
DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_LL_UART_EFM32 || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
- DEBUG_MSM_UART || DEBUG_NETX_UART || \
+ DEBUG_NETX_UART || \
DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \
DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \
@@ -1446,7 +1426,6 @@ config DEBUG_UART_VIRT
hex "Virtual base address of debug UART"
default 0xe0000a00 if DEBUG_NETX_UART
default 0xe0010fe0 if ARCH_RPC
- default 0xe1000000 if DEBUG_MSM_UART
default 0xf0000be0 if ARCH_EBSA110
default 0xf0010000 if DEBUG_ASM9260_UART
default 0xf01fb000 if DEBUG_NOMADIK_UART
@@ -1526,7 +1505,7 @@ config DEBUG_UART_VIRT
default DEBUG_UART_PHYS if !MMU
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
- DEBUG_MSM_UART || DEBUG_NETX_UART || \
+ DEBUG_NETX_UART || \
DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
@@ -1556,7 +1535,7 @@ config DEBUG_UART_8250_FLOW_CONTROL
config DEBUG_UNCOMPRESS
bool
- depends on ARCH_MULTIPLATFORM || ARCH_MSM || PLAT_SAMSUNG
+ depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG
default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
(!DEBUG_TEGRA_UART || !ZBOOT_ROM)
help
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 7f99cd652203..fa03c13ddfec 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -136,7 +136,6 @@ textofs-$(CONFIG_PM_H1940) := 0x00108000
ifeq ($(CONFIG_ARCH_SA1100),y)
textofs-$(CONFIG_SA1111) := 0x00208000
endif
-textofs-$(CONFIG_ARCH_MSM7X30) := 0x00208000
textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
@@ -170,7 +169,6 @@ machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx
machine-$(CONFIG_ARCH_MESON) += meson
machine-$(CONFIG_ARCH_MMP) += mmp
machine-$(CONFIG_ARCH_MOXART) += moxart
-machine-$(CONFIG_ARCH_MSM) += msm
machine-$(CONFIG_ARCH_MV78XX0) += mv78xx0
machine-$(CONFIG_ARCH_MVEBU) += mvebu
machine-$(CONFIG_ARCH_MXC) += imx
diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig
deleted file mode 100644
index dd18c9e527d6..000000000000
--- a/arch/arm/configs/msm_defconfig
+++ /dev/null
@@ -1,121 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_ARCH_MSM=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_CLEANCACHE=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_VFP=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_CFG80211=y
-CONFIG_RFKILL=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_CHR_DEV_SCH=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_SLIP=y
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_USB_USBNET=y
-# CONFIG_USB_NET_AX8817X is not set
-# CONFIG_USB_NET_ZAURUS is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_MOUSE_PS2 is not set
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_MSM=y
-CONFIG_SERIAL_MSM_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_DEBUG_GPIO=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_THERMAL=y
-CONFIG_REGULATOR=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_FB=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_DYNAMIC_MINORS=y
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_ACM=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_VBUS_DRAW=500
-CONFIG_RTC_CLASS=y
-CONFIG_STAGING=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT4_FS=y
-CONFIG_FUSE_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_CIFS=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DYNAMIC_DEBUG=y
-CONFIG_DEBUG_INFO=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOCKUP_DETECTOR=y
-# CONFIG_DETECT_HUNG_TASK is not set
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_TIMER_STATS=y
diff --git a/arch/arm/include/debug/msm.S b/arch/arm/include/debug/msm.S
index e55a9426b496..b03024fa671f 100644
--- a/arch/arm/include/debug/msm.S
+++ b/arch/arm/include/debug/msm.S
@@ -16,24 +16,17 @@
*/
.macro addruart, rp, rv, tmp
-#ifdef CONFIG_DEBUG_UART_PHYS
ldr \rp, =CONFIG_DEBUG_UART_PHYS
ldr \rv, =CONFIG_DEBUG_UART_VIRT
-#endif
.endm
.macro senduart, rd, rx
ARM_BE8(rev \rd, \rd )
-#ifdef CONFIG_DEBUG_QCOM_UARTDM
@ Write the 1 character to UARTDM_TF
str \rd, [\rx, #0x70]
-#else
- str \rd, [\rx, #0x0C]
-#endif
.endm
.macro waituart, rd, rx
-#ifdef CONFIG_DEBUG_QCOM_UARTDM
@ check for TX_EMT in UARTDM_SR
ldr \rd, [\rx, #0x08]
ARM_BE8(rev \rd, \rd )
@@ -55,13 +48,6 @@ ARM_BE8(rev \rd, \rd )
str \rd, [\rx, #0x40]
@ UARTDM reg. Read to induce delay
ldr \rd, [\rx, #0x08]
-#else
- @ wait for TX_READY
-1001: ldr \rd, [\rx, #0x08]
-ARM_BE8(rev \rd, \rd )
- tst \rd, #0x04
- beq 1001b
-#endif
.endm
.macro busyuart, rd, rx
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
deleted file mode 100644
index a6b50e62a495..000000000000
--- a/arch/arm/mach-msm/Kconfig
+++ /dev/null
@@ -1,109 +0,0 @@
-if ARCH_MSM
-
-choice
- prompt "Qualcomm MSM SoC Type"
- default ARCH_MSM7X00A
- depends on ARCH_MSM
-
-config ARCH_MSM7X00A
- bool "MSM7x00A / MSM7x01A"
- select ARCH_MSM_ARM11
- select CPU_V6
- select GPIO_MSM_V1
- select MACH_TROUT if !MACH_HALIBUT
- select MSM_PROC_COMM
- select MSM_SMD
- select CLKSRC_QCOM
- select MSM_SMD_PKG3
-
-config ARCH_MSM7X30
- bool "MSM7x30"
- select ARCH_MSM_SCORPION
- select CPU_V7
- select GPIO_MSM_V1
- select MACH_MSM7X30_SURF # if !
- select MSM_GPIOMUX
- select MSM_PROC_COMM
- select MSM_SMD
- select CLKSRC_QCOM
- select MSM_VIC
-
-config ARCH_QSD8X50
- bool "QSD8X50"
- select ARCH_MSM_SCORPION
- select CPU_V7
- select GPIO_MSM_V1
- select MACH_QSD8X50_SURF if !MACH_QSD8X50A_ST1_5
- select MSM_GPIOMUX
- select MSM_PROC_COMM
- select MSM_SMD
- select CLKSRC_QCOM
- select MSM_VIC
-
-endchoice
-
-config MSM_SOC_REV_A
- bool
-
-config ARCH_MSM_ARM11
- bool
-
-config ARCH_MSM_SCORPION
- bool
-
-config MSM_VIC
- bool
-
-menu "Qualcomm MSM Board Type"
- depends on ARCH_MSM
-
-config MACH_HALIBUT
- depends on ARCH_MSM
- depends on ARCH_MSM7X00A
- bool "Halibut Board (QCT SURF7201A)"
- help
- Support for the Qualcomm SURF7201A eval board.
-
-config MACH_TROUT
- depends on ARCH_MSM
- depends on ARCH_MSM7X00A
- bool "HTC Dream (aka trout)"
- help
- Support for the HTC Dream, T-Mobile G1, Android ADP1 devices.
-
-config MACH_MSM7X30_SURF
- depends on ARCH_MSM7X30
- bool "MSM7x30 SURF"
- help
- Support for the Qualcomm MSM7x30 SURF eval board.
-
-config MACH_QSD8X50_SURF
- depends on ARCH_QSD8X50
- bool "QSD8x50 SURF"
- help
- Support for the Qualcomm QSD8x50 SURF eval board.
-
-config MACH_QSD8X50A_ST1_5
- depends on ARCH_QSD8X50
- bool "QSD8x50A ST1.5"
- select MSM_SOC_REV_A
- help
- Support for the Qualcomm ST1.5.
-
-endmenu
-
-config MSM_SMD_PKG3
- bool
-
-config MSM_PROC_COMM
- bool
-
-config MSM_SMD
- bool
-
-config MSM_GPIOMUX
- bool
- help
- Support for MSM V1 TLMM GPIOMUX architecture.
-
-endif
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
deleted file mode 100644
index 27c078a568df..000000000000
--- a/arch/arm/mach-msm/Makefile
+++ /dev/null
@@ -1,23 +0,0 @@
-obj-$(CONFIG_MSM_PROC_COMM) += clock.o
-
-obj-$(CONFIG_MSM_VIC) += irq-vic.o
-
-obj-$(CONFIG_ARCH_MSM7X00A) += irq.o
-obj-$(CONFIG_ARCH_QSD8X50) += sirc.o
-
-obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o
-
-obj-$(CONFIG_ARCH_MSM7X00A) += dma.o io.o
-obj-$(CONFIG_ARCH_MSM7X30) += dma.o io.o
-obj-$(CONFIG_ARCH_QSD8X50) += dma.o io.o
-
-obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
-obj-$(CONFIG_MSM_SMD) += last_radio_log.o
-
-obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
-obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-panel.o devices-msm7x00.o
-obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
-obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
-obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
-obj-$(CONFIG_MSM_GPIOMUX) += gpiomux.o
-obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o
diff --git a/arch/arm/mach-msm/Makefile.boot b/arch/arm/mach-msm/Makefile.boot
deleted file mode 100644
index 9b803a578b4d..000000000000
--- a/arch/arm/mach-msm/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
- zreladdr-y += 0x10008000
-params_phys-y := 0x10000100
-initrd_phys-y := 0x10800000
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
deleted file mode 100644
index fc832040c6e9..000000000000
--- a/arch/arm/mach-msm/board-halibut.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/* linux/arch/arm/mach-msm/board-halibut.c
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/smc91x.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-#include <asm/setup.h>
-
-#include <mach/irqs.h>
-#include <mach/msm_iomap.h>
-
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-#include "devices.h"
-#include "common.h"
-
-static struct resource smc91x_resources[] = {
- [0] = {
- .start = 0x9C004300,
- .end = 0x9C004400,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = MSM_GPIO_TO_INT(49),
- .end = MSM_GPIO_TO_INT(49),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-static struct smc91x_platdata smc91x_platdata = {
- .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
- .dev.platform_data = &smc91x_platdata,
-};
-
-static struct platform_device *devices[] __initdata = {
- &msm_clock_7x01a,
- &msm_device_gpio_7201,
- &msm_device_uart3,
- &msm_device_smd,
- &msm_device_nand,
- &msm_device_hsusb,
- &msm_device_i2c,
- &smc91x_device,
-};
-
-static void __init halibut_init_early(void)
-{
- arch_ioremap_caller = __msm_ioremap_caller;
-}
-
-static void __init halibut_init_irq(void)
-{
- msm_init_irq();
-}
-
-static void __init halibut_init(void)
-{
- platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init halibut_map_io(void)
-{
- msm_map_common_io();
-}
-
-static void __init halibut_init_late(void)
-{
- smd_debugfs_init();
-}
-
-MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
- .atag_offset = 0x100,
- .map_io = halibut_map_io,
- .init_early = halibut_init_early,
- .init_irq = halibut_init_irq,
- .init_machine = halibut_init,
- .init_late = halibut_init_late,
- .init_time = msm7x01_timer_init,
-MACHINE_END
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
deleted file mode 100644
index 8f5ecdc4f3ce..000000000000
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/smsc911x.h>
-#include <linux/usb/msm_hsusb.h>
-#include <linux/clkdev.h>
-#include <linux/memblock.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/memory.h>
-#include <asm/setup.h>
-
-#include <mach/clk.h>
-#include <mach/msm_iomap.h>
-#include <mach/dma.h>
-
-#include <mach/vreg.h>
-#include "devices.h"
-#include "gpiomux.h"
-#include "proc_comm.h"
-#include "common.h"
-
-static void __init msm7x30_fixup(struct tag *tag, char **cmdline)
-{
- for (; tag->hdr.size; tag = tag_next(tag))
- if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) {
- tag->u.mem.start = 0;
- tag->u.mem.size += SZ_2M;
- }
-}
-
-static void __init msm7x30_reserve(void)
-{
- memblock_remove(0x0, SZ_2M);
-}
-
-static int hsusb_phy_init_seq[] = {
- 0x30, 0x32, /* Enable and set Pre-Emphasis Depth to 20% */
- 0x02, 0x36, /* Disable CDR Auto Reset feature */
- -1
-};
-
-static int hsusb_link_clk_reset(struct clk *link_clk, bool assert)
-{
- int ret;
-
- if (assert) {
- ret = clk_reset(link_clk, CLK_RESET_ASSERT);
- if (ret)
- pr_err("usb hs_clk assert failed\n");
- } else {
- ret = clk_reset(link_clk, CLK_RESET_DEASSERT);
- if (ret)
- pr_err("usb hs_clk deassert failed\n");
- }
- return ret;
-}
-
-static int hsusb_phy_clk_reset(struct clk *phy_clk)
-{
- int ret;
-
- ret = clk_reset(phy_clk, CLK_RESET_ASSERT);
- if (ret) {
- pr_err("usb phy clk assert failed\n");
- return ret;
- }
- usleep_range(10000, 12000);
- ret = clk_reset(phy_clk, CLK_RESET_DEASSERT);
- if (ret)
- pr_err("usb phy clk deassert failed\n");
- return ret;
-}
-
-static struct msm_otg_platform_data msm_otg_pdata = {
- .phy_init_seq = hsusb_phy_init_seq,
- .mode = USB_DR_MODE_PERIPHERAL,
- .otg_control = OTG_PHY_CONTROL,
- .link_clk_reset = hsusb_link_clk_reset,
- .phy_clk_reset = hsusb_phy_clk_reset,
-};
-
-struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
-#ifdef CONFIG_SERIAL_MSM_CONSOLE
- [49] = { /* UART2 RFR */
- .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
- GPIOMUX_FUNC_2 | GPIOMUX_VALID,
- },
- [50] = { /* UART2 CTS */
- .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
- GPIOMUX_FUNC_2 | GPIOMUX_VALID,
- },
- [51] = { /* UART2 RX */
- .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
- GPIOMUX_FUNC_2 | GPIOMUX_VALID,
- },
- [52] = { /* UART2 TX */
- .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
- GPIOMUX_FUNC_2 | GPIOMUX_VALID,
- },
-#endif
-};
-
-static struct platform_device *devices[] __initdata = {
- &msm_clock_7x30,
- &msm_device_gpio_7x30,
-#if defined(CONFIG_SERIAL_MSM)
- &msm_device_uart2,
-#endif
- &msm_device_smd,
- &msm_device_otg,
- &msm_device_hsusb,
- &msm_device_hsusb_host,
-};
-
-static void __init msm7x30_init_irq(void)
-{
- msm_init_irq();
-}
-
-static void __init msm7x30_init(void)
-{
- msm_device_otg.dev.platform_data = &msm_otg_pdata;
- msm_device_hsusb.dev.parent = &msm_device_otg.dev;
- msm_device_hsusb_host.dev.parent = &msm_device_otg.dev;
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init msm7x30_map_io(void)
-{
- msm_map_msm7x30_io();
-}
-
-static void __init msm7x30_init_late(void)
-{
- smd_debugfs_init();
-}
-
-MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
- .atag_offset = 0x100,
- .fixup = msm7x30_fixup,
- .reserve = msm7x30_reserve,
- .map_io = msm7x30_map_io,
- .init_irq = msm7x30_init_irq,
- .init_machine = msm7x30_init,
- .init_late = msm7x30_init_late,
- .init_time = msm7x30_timer_init,
-MACHINE_END
-
-MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
- .atag_offset = 0x100,
- .fixup = msm7x30_fixup,
- .reserve = msm7x30_reserve,
- .map_io = msm7x30_map_io,
- .init_irq = msm7x30_init_irq,
- .init_machine = msm7x30_init,
- .init_late = msm7x30_init_late,
- .init_time = msm7x30_timer_init,
-MACHINE_END
-
-MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
- .atag_offset = 0x100,
- .fixup = msm7x30_fixup,
- .reserve = msm7x30_reserve,
- .map_io = msm7x30_map_io,
- .init_irq = msm7x30_init_irq,
- .init_machine = msm7x30_init,
- .init_late = msm7x30_init_late,
- .init_time = msm7x30_timer_init,
-MACHINE_END
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
deleted file mode 100644
index 10016a3bc698..000000000000
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ /dev/null
@@ -1,254 +0,0 @@
-/* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/usb/msm_hsusb.h>
-#include <linux/err.h>
-#include <linux/clkdev.h>
-#include <linux/smc91x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/io.h>
-#include <asm/setup.h>
-
-#include <mach/irqs.h>
-#include <mach/sirc.h>
-#include <mach/vreg.h>
-#include <mach/clk.h>
-#include <linux/platform_data/mmc-msm_sdcc.h>
-
-#include "devices.h"
-#include "common.h"
-
-static const resource_size_t qsd8x50_surf_smc91x_base __initconst = 0x70000300;
-static const unsigned qsd8x50_surf_smc91x_gpio __initconst = 156;
-
-/* Leave smc91x resources empty here, as we'll fill them in
- * at run-time: they vary from board to board, and the true
- * configuration won't be known until boot.
- */
-static struct resource smc91x_resources[] = {
- [0] = {
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-static struct smc91x_platdata smc91x_platdata = {
- .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
- .dev.platform_data = &smc91x_platdata,
-};
-
-static int __init msm_init_smc91x(void)
-{
- if (machine_is_qsd8x50_surf()) {
- smc91x_resources[0].start = qsd8x50_surf_smc91x_base;
- smc91x_resources[0].end = qsd8x50_surf_smc91x_base + 0xff;
- smc91x_resources[1].start =
- gpio_to_irq(qsd8x50_surf_smc91x_gpio);
- smc91x_resources[1].end =
- gpio_to_irq(qsd8x50_surf_smc91x_gpio);
- platform_device_register(&smc91x_device);
- }
-
- return 0;
-}
-module_init(msm_init_smc91x);
-
-static int hsusb_phy_init_seq[] = {
- 0x08, 0x31, /* Increase HS Driver Amplitude */
- 0x20, 0x32, /* Enable and set Pre-Emphasis Depth to 10% */
- -1
-};
-
-static int hsusb_link_clk_reset(struct clk *link_clk, bool assert)
-{
- int ret;
-
- if (assert) {
- ret = clk_reset(link_clk, CLK_RESET_ASSERT);
- if (ret)
- pr_err("usb hs_clk assert failed\n");
- } else {
- ret = clk_reset(link_clk, CLK_RESET_DEASSERT);
- if (ret)
- pr_err("usb hs_clk deassert failed\n");
- }
- return ret;
-}
-
-static int hsusb_phy_clk_reset(struct clk *phy_clk)
-{
- int ret;
-
- ret = clk_reset(phy_clk, CLK_RESET_ASSERT);
- if (ret) {
- pr_err("usb phy clk assert failed\n");
- return ret;
- }
- usleep_range(10000, 12000);
- ret = clk_reset(phy_clk, CLK_RESET_DEASSERT);
- if (ret)
- pr_err("usb phy clk deassert failed\n");
- return ret;
-}
-
-static struct msm_otg_platform_data msm_otg_pdata = {
- .phy_init_seq = hsusb_phy_init_seq,
- .mode = USB_DR_MODE_PERIPHERAL,
- .otg_control = OTG_PHY_CONTROL,
- .link_clk_reset = hsusb_link_clk_reset,
- .phy_clk_reset = hsusb_phy_clk_reset,
-};
-
-static struct platform_device *devices[] __initdata = {
- &msm_clock_8x50,
- &msm_device_gpio_8x50,
- &msm_device_uart3,
- &msm_device_smd,
- &msm_device_otg,
- &msm_device_hsusb,
- &msm_device_hsusb_host,
-};
-
-static struct msm_mmc_gpio sdc1_gpio_cfg[] = {
- {51, "sdc1_dat_3"},
- {52, "sdc1_dat_2"},
- {53, "sdc1_dat_1"},
- {54, "sdc1_dat_0"},
- {55, "sdc1_cmd"},
- {56, "sdc1_clk"}
-};
-
-static struct vreg *vreg_mmc;
-static unsigned long vreg_sts;
-
-static uint32_t msm_sdcc_setup_power(struct device *dv, unsigned int vdd)
-{
- int rc = 0;
- struct platform_device *pdev;
-
- pdev = container_of(dv, struct platform_device, dev);
-
- if (vdd == 0) {
- if (!vreg_sts)
- return 0;
-
- clear_bit(pdev->id, &vreg_sts);
-
- if (!vreg_sts) {
- rc = vreg_disable(vreg_mmc);
- if (rc)
- pr_err("vreg_mmc disable failed for slot "
- "%d: %d\n", pdev->id, rc);
- }
- return 0;
- }
-
- if (!vreg_sts) {
- rc = vreg_set_level(vreg_mmc, 2900);
- if (rc)
- pr_err("vreg_mmc set level failed for slot %d: %d\n",
- pdev->id, rc);
- rc = vreg_enable(vreg_mmc);
- if (rc)
- pr_err("vreg_mmc enable failed for slot %d: %d\n",
- pdev->id, rc);
- }
- set_bit(pdev->id, &vreg_sts);
- return 0;
-}
-
-static struct msm_mmc_gpio_data sdc1_gpio = {
- .gpio = sdc1_gpio_cfg,
- .size = ARRAY_SIZE(sdc1_gpio_cfg),
-};
-
-static struct msm_mmc_platform_data qsd8x50_sdc1_data = {
- .ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
- .translate_vdd = msm_sdcc_setup_power,
- .gpio_data = &sdc1_gpio,
-};
-
-static void __init qsd8x50_init_mmc(void)
-{
- vreg_mmc = vreg_get(NULL, "gp5");
-
- if (IS_ERR(vreg_mmc)) {
- pr_err("vreg get for vreg_mmc failed (%ld)\n",
- PTR_ERR(vreg_mmc));
- return;
- }
-
- msm_add_sdcc(1, &qsd8x50_sdc1_data, 0, 0);
-}
-
-static void __init qsd8x50_map_io(void)
-{
- msm_map_qsd8x50_io();
-}
-
-static void __init qsd8x50_init_irq(void)
-{
- msm_init_irq();
- msm_init_sirc();
-}
-
-static void __init qsd8x50_init(void)
-{
- msm_device_otg.dev.platform_data = &msm_otg_pdata;
- msm_device_hsusb.dev.parent = &msm_device_otg.dev;
- msm_device_hsusb_host.dev.parent = &msm_device_otg.dev;
- platform_add_devices(devices, ARRAY_SIZE(devices));
- qsd8x50_init_mmc();
-}
-
-static void __init qsd8x50_init_late(void)
-{
- smd_debugfs_init();
-}
-
-MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
- .atag_offset = 0x100,
- .map_io = qsd8x50_map_io,
- .init_irq = qsd8x50_init_irq,
- .init_machine = qsd8x50_init,
- .init_late = qsd8x50_init_late,
- .init_time = qsd8x50_timer_init,
-MACHINE_END
-
-MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
- .atag_offset = 0x100,
- .map_io = qsd8x50_map_io,
- .init_irq = qsd8x50_init_irq,
- .init_machine = qsd8x50_init,
- .init_late = qsd8x50_init_late,
- .init_time = qsd8x50_timer_init,
-MACHINE_END
diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
deleted file mode 100644
index e50967926dcd..000000000000
--- a/arch/arm/mach-msm/board-sapphire.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/* linux/arch/arm/mach-msm/board-sapphire.c
- * Copyright (C) 2007-2009 HTC Corporation.
- * Author: Thomas Tsai <thomas_tsai@htc.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
-*/
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/device.h>
-
-#include <linux/delay.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-#include <mach/vreg.h>
-
-#include <asm/io.h>
-#include <asm/delay.h>
-#include <asm/setup.h>
-
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/memblock.h>
-
-#include "gpio_chip.h"
-#include "board-sapphire.h"
-#include "proc_comm.h"
-#include "devices.h"
-#include "common.h"
-
-void msm_init_irq(void);
-void msm_init_gpio(void);
-
-static struct platform_device *devices[] __initdata = {
- &msm_device_smd,
- &msm_device_dmov,
- &msm_device_nand,
- &msm_device_uart1,
- &msm_device_uart3,
-};
-
-void msm_timer_init(void);
-
-static void __init sapphire_init_irq(void)
-{
- msm_init_irq();
-}
-
-static void __init sapphire_init(void)
-{
- platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static struct map_desc sapphire_io_desc[] __initdata = {
- {
- .virtual = SAPPHIRE_CPLD_BASE,
- .pfn = __phys_to_pfn(SAPPHIRE_CPLD_START),
- .length = SAPPHIRE_CPLD_SIZE,
- .type = MT_DEVICE_NONSHARED
- }
-};
-
-static void __init sapphire_fixup(struct tag *tags, char **cmdline)
-{
- int smi_sz = parse_tag_smi((const struct tag *)tags);
-
- if (smi_sz == 32) {
- memblock_add(PHYS_OFFSET, 84*SZ_1M);
- } else if (smi_sz == 64) {
- memblock_add(PHYS_OFFSET, 101*SZ_1M);
- } else {
- memblock_add(PHYS_OFFSET, 101*SZ_1M);
- /* Give a default value when not get smi size */
- smi_sz = 64;
- }
-}
-
-static void __init sapphire_map_io(void)
-{
- msm_map_common_io();
- iotable_init(sapphire_io_desc, ARRAY_SIZE(sapphire_io_desc));
- msm_clock_init();
-}
-
-static void __init sapphire_init_late(void)
-{
- smd_debugfs_init();
-}
-
-MACHINE_START(SAPPHIRE, "sapphire")
-/* Maintainer: Brian Swetland <swetland@google.com> */
- .atag_offset = 0x100,
- .fixup = sapphire_fixup,
- .map_io = sapphire_map_io,
- .init_irq = sapphire_init_irq,
- .init_machine = sapphire_init,
- .init_late = sapphire_init_late,
- .init_time = msm_timer_init,
-MACHINE_END
diff --git a/arch/arm/mach-msm/board-trout-gpio.c b/arch/arm/mach-msm/board-trout-gpio.c
deleted file mode 100644
index 722ad63b7edc..000000000000
--- a/arch/arm/mach-msm/board-trout-gpio.c
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- * linux/arch/arm/mach-msm/gpio.c
- *
- * Copyright (C) 2005 HP Labs
- * Copyright (C) 2008 Google, Inc.
- * Copyright (C) 2009 Pavel Machek <pavel@ucw.cz>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-
-#include "board-trout.h"
-
-static uint8_t trout_int_mask[2] = {
- [0] = 0xff, /* mask all interrupts */
- [1] = 0xff,
-};
-static uint8_t trout_sleep_int_mask[] = {
- [0] = 0xff,
- [1] = 0xff,
-};
-
-struct msm_gpio_chip {
- struct gpio_chip chip;
- void __iomem *reg; /* Base of register bank */
- u8 shadow;
-};
-
-#define to_msm_gpio_chip(c) container_of(c, struct msm_gpio_chip, chip)
-
-static int msm_gpiolib_get(struct gpio_chip *chip, unsigned offset)
-{
- struct msm_gpio_chip *msm_gpio = to_msm_gpio_chip(chip);
- unsigned mask = 1 << offset;
-
- return !!(readb(msm_gpio->reg) & mask);
-}
-
-static void msm_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val)
-{
- struct msm_gpio_chip *msm_gpio = to_msm_gpio_chip(chip);
- unsigned mask = 1 << offset;
-
- if (val)
- msm_gpio->shadow |= mask;
- else
- msm_gpio->shadow &= ~mask;
-
- writeb(msm_gpio->shadow, msm_gpio->reg);
-}
-
-static int msm_gpiolib_direction_input(struct gpio_chip *chip,
- unsigned offset)
-{
- msm_gpiolib_set(chip, offset, 0);
- return 0;
-}
-
-static int msm_gpiolib_direction_output(struct gpio_chip *chip,
- unsigned offset, int val)
-{
- msm_gpiolib_set(chip, offset, val);
- return 0;
-}
-
-static int trout_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
- return TROUT_GPIO_TO_INT(offset + chip->base);
-}
-
-#define TROUT_GPIO_BANK(name, reg_num, base_gpio, shadow_val) \
- { \
- .chip = { \
- .label = name, \
- .direction_input = msm_gpiolib_direction_input,\
- .direction_output = msm_gpiolib_direction_output, \
- .get = msm_gpiolib_get, \
- .set = msm_gpiolib_set, \
- .to_irq = trout_gpio_to_irq, \
- .base = base_gpio, \
- .ngpio = 8, \
- }, \
- .reg = reg_num + TROUT_CPLD_BASE, \
- .shadow = shadow_val, \
- }
-
-static struct msm_gpio_chip msm_gpio_banks[] = {
-#if defined(CONFIG_DEBUG_MSM_UART) && (CONFIG_DEBUG_UART_PHYS == 0xa9a00000)
- /* H2W pins <-> UART1 */
- TROUT_GPIO_BANK("MISC2", 0x00, TROUT_GPIO_MISC2_BASE, 0x40),
-#else
- /* H2W pins <-> UART3, Bluetooth <-> UART1 */
- TROUT_GPIO_BANK("MISC2", 0x00, TROUT_GPIO_MISC2_BASE, 0x80),
-#endif
- /* I2C pull */
- TROUT_GPIO_BANK("MISC3", 0x02, TROUT_GPIO_MISC3_BASE, 0x04),
- TROUT_GPIO_BANK("MISC4", 0x04, TROUT_GPIO_MISC4_BASE, 0),
- /* mmdi 32k en */
- TROUT_GPIO_BANK("MISC5", 0x06, TROUT_GPIO_MISC5_BASE, 0x04),
- TROUT_GPIO_BANK("INT2", 0x08, TROUT_GPIO_INT2_BASE, 0),
- TROUT_GPIO_BANK("MISC1", 0x0a, TROUT_GPIO_MISC1_BASE, 0),
- TROUT_GPIO_BANK("VIRTUAL", 0x12, TROUT_GPIO_VIRTUAL_BASE, 0),
-};
-
-static void trout_gpio_irq_ack(struct irq_data *d)
-{
- int bank = TROUT_INT_TO_BANK(d->irq);
- uint8_t mask = TROUT_INT_TO_MASK(d->irq);
- int reg = TROUT_BANK_TO_STAT_REG(bank);
- /*printk(KERN_INFO "trout_gpio_irq_ack irq %d\n", d->irq);*/
- writeb(mask, TROUT_CPLD_BASE + reg);
-}
-
-static void trout_gpio_irq_mask(struct irq_data *d)
-{
- unsigned long flags;
- uint8_t reg_val;
- int bank = TROUT_INT_TO_BANK(d->irq);
- uint8_t mask = TROUT_INT_TO_MASK(d->irq);
- int reg = TROUT_BANK_TO_MASK_REG(bank);
-
- local_irq_save(flags);
- reg_val = trout_int_mask[bank] |= mask;
- /*printk(KERN_INFO "trout_gpio_irq_mask irq %d => %d:%02x\n",
- d->irq, bank, reg_val);*/
- writeb(reg_val, TROUT_CPLD_BASE + reg);
- local_irq_restore(flags);
-}
-
-static void trout_gpio_irq_unmask(struct irq_data *d)
-{
- unsigned long flags;
- uint8_t reg_val;
- int bank = TROUT_INT_TO_BANK(d->irq);
- uint8_t mask = TROUT_INT_TO_MASK(d->irq);
- int reg = TROUT_BANK_TO_MASK_REG(bank);
-
- local_irq_save(flags);
- reg_val = trout_int_mask[bank] &= ~mask;
- /*printk(KERN_INFO "trout_gpio_irq_unmask irq %d => %d:%02x\n",
- d->irq, bank, reg_val);*/
- writeb(reg_val, TROUT_CPLD_BASE + reg);
- local_irq_restore(flags);
-}
-
-int trout_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
-{
- unsigned long flags;
- int bank = TROUT_INT_TO_BANK(d->irq);
- uint8_t mask = TROUT_INT_TO_MASK(d->irq);
-
- local_irq_save(flags);
- if(on)
- trout_sleep_int_mask[bank] &= ~mask;
- else
- trout_sleep_int_mask[bank] |= mask;
- local_irq_restore(flags);
- return 0;
-}
-
-static void trout_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- int j, m;
- unsigned v;
- int bank;
- int stat_reg;
- int int_base = TROUT_INT_START;
- uint8_t int_mask;
-
- for (bank = 0; bank < 2; bank++) {
- stat_reg = TROUT_BANK_TO_STAT_REG(bank);
- v = readb(TROUT_CPLD_BASE + stat_reg);
- int_mask = trout_int_mask[bank];
- if (v & int_mask) {
- writeb(v & int_mask, TROUT_CPLD_BASE + stat_reg);
- printk(KERN_ERR "trout_gpio_irq_handler: got masked "
- "interrupt: %d:%02x\n", bank, v & int_mask);
- }
- v &= ~int_mask;
- while (v) {
- m = v & -v;
- j = fls(m) - 1;
- /*printk(KERN_INFO "msm_gpio_irq_handler %d:%02x %02x b"
- "it %d irq %d\n", bank, v, m, j, int_base + j);*/
- v &= ~m;
- generic_handle_irq(int_base + j);
- }
- int_base += TROUT_INT_BANK0_COUNT;
- }
- desc->irq_data.chip->irq_ack(&desc->irq_data);
-}
-
-static struct irq_chip trout_gpio_irq_chip = {
- .name = "troutgpio",
- .irq_ack = trout_gpio_irq_ack,
- .irq_mask = trout_gpio_irq_mask,
- .irq_unmask = trout_gpio_irq_unmask,
- .irq_set_wake = trout_gpio_irq_set_wake,
-};
-
-/*
- * Called from the processor-specific init to enable GPIO pin support.
- */
-int __init trout_init_gpio(void)
-{
- int i;
- for(i = TROUT_INT_START; i <= TROUT_INT_END; i++) {
- irq_set_chip_and_handler(i, &trout_gpio_irq_chip,
- handle_edge_irq);
- set_irq_flags(i, IRQF_VALID);
- }
-
- for (i = 0; i < ARRAY_SIZE(msm_gpio_banks); i++)
- gpiochip_add(&msm_gpio_banks[i].chip);
-
- irq_set_irq_type(MSM_GPIO_TO_INT(17), IRQF_TRIGGER_HIGH);
- irq_set_chained_handler(MSM_GPIO_TO_INT(17), trout_gpio_irq_handler);
- irq_set_irq_wake(MSM_GPIO_TO_INT(17), 1);
-
- return 0;
-}
-
-postcore_initcall(trout_init_gpio);
-
diff --git a/arch/arm/mach-msm/board-trout-mmc.c b/arch/arm/mach-msm/board-trout-mmc.c
deleted file mode 100644
index 3723e55819d6..000000000000
--- a/arch/arm/mach-msm/board-trout-mmc.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/* linux/arch/arm/mach-msm/board-trout-mmc.c
-** Author: Brian Swetland <swetland@google.com>
-*/
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sdio_ids.h>
-#include <linux/err.h>
-#include <linux/debugfs.h>
-
-#include <asm/io.h>
-
-#include <mach/vreg.h>
-
-#include <linux/platform_data/mmc-msm_sdcc.h>
-
-#include "devices.h"
-
-#include "board-trout.h"
-
-#include "proc_comm.h"
-
-#define DEBUG_SDSLOT_VDD 1
-
-/* ---- COMMON ---- */
-static void config_gpio_table(uint32_t *table, int len)
-{
- int n;
- unsigned id;
- for(n = 0; n < len; n++) {
- id = table[n];
- msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &id, 0);
- }
-}
-
-/* ---- SDCARD ---- */
-
-static uint32_t sdcard_on_gpio_table[] = {
- PCOM_GPIO_CFG(62, 2, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_8MA), /* CLK */
- PCOM_GPIO_CFG(63, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_8MA), /* CMD */
- PCOM_GPIO_CFG(64, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_8MA), /* DAT3 */
- PCOM_GPIO_CFG(65, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_8MA), /* DAT2 */
- PCOM_GPIO_CFG(66, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_4MA), /* DAT1 */
- PCOM_GPIO_CFG(67, 2, GPIO_OUTPUT, GPIO_PULL_UP, GPIO_4MA), /* DAT0 */
-};
-
-static uint32_t sdcard_off_gpio_table[] = {
- PCOM_GPIO_CFG(62, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* CLK */
- PCOM_GPIO_CFG(63, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* CMD */
- PCOM_GPIO_CFG(64, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT3 */
- PCOM_GPIO_CFG(65, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT2 */
- PCOM_GPIO_CFG(66, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT1 */
- PCOM_GPIO_CFG(67, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_4MA), /* DAT0 */
-};
-
-static uint opt_disable_sdcard;
-
-static int __init trout_disablesdcard_setup(char *str)
-{
- int cal = simple_strtol(str, NULL, 0);
-
- opt_disable_sdcard = cal;
- return 1;
-}
-
-__setup("board_trout.disable_sdcard=", trout_disablesdcard_setup);
-
-static struct vreg *vreg_sdslot; /* SD slot power */
-
-struct mmc_vdd_xlat {
- int mask;
- int level;
-};
-
-static struct mmc_vdd_xlat mmc_vdd_table[] = {
- { MMC_VDD_165_195, 1800 },
- { MMC_VDD_20_21, 2050 },
- { MMC_VDD_21_22, 2150 },
- { MMC_VDD_22_23, 2250 },
- { MMC_VDD_23_24, 2350 },
- { MMC_VDD_24_25, 2450 },
- { MMC_VDD_25_26, 2550 },
- { MMC_VDD_26_27, 2650 },
- { MMC_VDD_27_28, 2750 },
- { MMC_VDD_28_29, 2850 },
- { MMC_VDD_29_30, 2950 },
-};
-
-static unsigned int sdslot_vdd = 0xffffffff;
-static unsigned int sdslot_vreg_enabled;
-
-static uint32_t trout_sdslot_switchvdd(struct device *dev, unsigned int vdd)
-{
- int i, rc;
-
- BUG_ON(!vreg_sdslot);
-
- if (vdd == sdslot_vdd)
- return 0;
-
- sdslot_vdd = vdd;
-
- if (vdd == 0) {
-#if DEBUG_SDSLOT_VDD
- printk("%s: Disabling SD slot power\n", __func__);
-#endif
- config_gpio_table(sdcard_off_gpio_table,
- ARRAY_SIZE(sdcard_off_gpio_table));
- vreg_disable(vreg_sdslot);
- sdslot_vreg_enabled = 0;
- return 0;
- }
-
- if (!sdslot_vreg_enabled) {
- rc = vreg_enable(vreg_sdslot);
- if (rc) {
- printk(KERN_ERR "%s: Error enabling vreg (%d)\n",
- __func__, rc);
- }
- config_gpio_table(sdcard_on_gpio_table,
- ARRAY_SIZE(sdcard_on_gpio_table));
- sdslot_vreg_enabled = 1;
- }
-
- for (i = 0; i < ARRAY_SIZE(mmc_vdd_table); i++) {
- if (mmc_vdd_table[i].mask == (1 << vdd)) {
-#if DEBUG_SDSLOT_VDD
- printk("%s: Setting level to %u\n",
- __func__, mmc_vdd_table[i].level);
-#endif
- rc = vreg_set_level(vreg_sdslot,
- mmc_vdd_table[i].level);
- if (rc) {
- printk(KERN_ERR
- "%s: Error setting vreg level (%d)\n",
- __func__, rc);
- }
- return 0;
- }
- }
-
- printk(KERN_ERR "%s: Invalid VDD %d specified\n", __func__, vdd);
- return 0;
-}
-
-static unsigned int trout_sdslot_status(struct device *dev)
-{
- unsigned int status;
-
- status = (unsigned int) gpio_get_value(TROUT_GPIO_SDMC_CD_N);
- return (!status);
-}
-
-#define TROUT_MMC_VDD MMC_VDD_165_195 | MMC_VDD_20_21 | MMC_VDD_21_22 \
- | MMC_VDD_22_23 | MMC_VDD_23_24 | MMC_VDD_24_25 \
- | MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 \
- | MMC_VDD_28_29 | MMC_VDD_29_30
-
-static struct msm_mmc_platform_data trout_sdslot_data = {
- .ocr_mask = TROUT_MMC_VDD,
- .status = trout_sdslot_status,
- .translate_vdd = trout_sdslot_switchvdd,
-};
-
-int __init trout_init_mmc(unsigned int sys_rev)
-{
- sdslot_vreg_enabled = 0;
-
- vreg_sdslot = vreg_get(0, "gp6");
- if (IS_ERR(vreg_sdslot))
- return PTR_ERR(vreg_sdslot);
-
- irq_set_irq_wake(TROUT_GPIO_TO_INT(TROUT_GPIO_SDMC_CD_N), 1);
-
- if (!opt_disable_sdcard)
- msm_add_sdcc(2, &trout_sdslot_data,
- TROUT_GPIO_TO_INT(TROUT_GPIO_SDMC_CD_N), 0);
- else
- printk(KERN_INFO "trout: SD-Card interface disabled\n");
- return 0;
-}
-
diff --git a/arch/arm/mach-msm/board-trout-panel.c b/arch/arm/mach-msm/board-trout-panel.c
deleted file mode 100644
index 77b0a26f897f..000000000000
--- a/arch/arm/mach-msm/board-trout-panel.c
+++ /dev/null
@@ -1,292 +0,0 @@
-/* linux/arch/arm/mach-msm/board-trout-mddi.c
-** Author: Brian Swetland <swetland@google.com>
-*/
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/leds.h>
-#include <linux/err.h>
-
-#include <asm/io.h>
-#include <asm/mach-types.h>
-#include <asm/system_info.h>
-
-#include <linux/platform_data/video-msm_fb.h>
-#include <mach/vreg.h>
-
-#include "board-trout.h"
-#include "proc_comm.h"
-#include "clock-pcom.h"
-#include "devices.h"
-
-#define TROUT_DEFAULT_BACKLIGHT_BRIGHTNESS 255
-
-#define MDDI_CLIENT_CORE_BASE 0x108000
-#define LCD_CONTROL_BLOCK_BASE 0x110000
-#define SPI_BLOCK_BASE 0x120000
-#define I2C_BLOCK_BASE 0x130000
-#define PWM_BLOCK_BASE 0x140000
-#define GPIO_BLOCK_BASE 0x150000
-#define SYSTEM_BLOCK1_BASE 0x160000
-#define SYSTEM_BLOCK2_BASE 0x170000
-
-
-#define DPSUS (MDDI_CLIENT_CORE_BASE|0x24)
-#define SYSCLKENA (MDDI_CLIENT_CORE_BASE|0x2C)
-#define PWM0OFF (PWM_BLOCK_BASE|0x1C)
-
-#define V_VDDE2E_VDD2_GPIO 0
-#define MDDI_RST_N 82
-
-#define MDDICAP0 (MDDI_CLIENT_CORE_BASE|0x00)
-#define MDDICAP1 (MDDI_CLIENT_CORE_BASE|0x04)
-#define MDDICAP2 (MDDI_CLIENT_CORE_BASE|0x08)
-#define MDDICAP3 (MDDI_CLIENT_CORE_BASE|0x0C)
-#define MDCAPCHG (MDDI_CLIENT_CORE_BASE|0x10)
-#define MDCRCERC (MDDI_CLIENT_CORE_BASE|0x14)
-#define TTBUSSEL (MDDI_CLIENT_CORE_BASE|0x18)
-#define DPSET0 (MDDI_CLIENT_CORE_BASE|0x1C)
-#define DPSET1 (MDDI_CLIENT_CORE_BASE|0x20)
-#define DPSUS (MDDI_CLIENT_CORE_BASE|0x24)
-#define DPRUN (MDDI_CLIENT_CORE_BASE|0x28)
-#define SYSCKENA (MDDI_CLIENT_CORE_BASE|0x2C)
-#define TESTMODE (MDDI_CLIENT_CORE_BASE|0x30)
-#define FIFOMONI (MDDI_CLIENT_CORE_BASE|0x34)
-#define INTMONI (MDDI_CLIENT_CORE_BASE|0x38)
-#define MDIOBIST (MDDI_CLIENT_CORE_BASE|0x3C)
-#define MDIOPSET (MDDI_CLIENT_CORE_BASE|0x40)
-#define BITMAP0 (MDDI_CLIENT_CORE_BASE|0x44)
-#define BITMAP1 (MDDI_CLIENT_CORE_BASE|0x48)
-#define BITMAP2 (MDDI_CLIENT_CORE_BASE|0x4C)
-#define BITMAP3 (MDDI_CLIENT_CORE_BASE|0x50)
-#define BITMAP4 (MDDI_CLIENT_CORE_BASE|0x54)
-
-#define SRST (LCD_CONTROL_BLOCK_BASE|0x00)
-#define PORT_ENB (LCD_CONTROL_BLOCK_BASE|0x04)
-#define START (LCD_CONTROL_BLOCK_BASE|0x08)
-#define PORT (LCD_CONTROL_BLOCK_BASE|0x0C)
-#define CMN (LCD_CONTROL_BLOCK_BASE|0x10)
-#define GAMMA (LCD_CONTROL_BLOCK_BASE|0x14)
-#define INTFLG (LCD_CONTROL_BLOCK_BASE|0x18)
-#define INTMSK (LCD_CONTROL_BLOCK_BASE|0x1C)
-#define MPLFBUF (LCD_CONTROL_BLOCK_BASE|0x20)
-#define HDE_LEFT (LCD_CONTROL_BLOCK_BASE|0x24)
-#define VDE_TOP (LCD_CONTROL_BLOCK_BASE|0x28)
-#define PXL (LCD_CONTROL_BLOCK_BASE|0x30)
-#define HCYCLE (LCD_CONTROL_BLOCK_BASE|0x34)
-#define HSW (LCD_CONTROL_BLOCK_BASE|0x38)
-#define HDE_START (LCD_CONTROL_BLOCK_BASE|0x3C)
-#define HDE_SIZE (LCD_CONTROL_BLOCK_BASE|0x40)
-#define VCYCLE (LCD_CONTROL_BLOCK_BASE|0x44)
-#define VSW (LCD_CONTROL_BLOCK_BASE|0x48)
-#define VDE_START (LCD_CONTROL_BLOCK_BASE|0x4C)
-#define VDE_SIZE (LCD_CONTROL_BLOCK_BASE|0x50)
-#define WAKEUP (LCD_CONTROL_BLOCK_BASE|0x54)
-#define WSYN_DLY (LCD_CONTROL_BLOCK_BASE|0x58)
-#define REGENB (LCD_CONTROL_BLOCK_BASE|0x5C)
-#define VSYNIF (LCD_CONTROL_BLOCK_BASE|0x60)
-#define WRSTB (LCD_CONTROL_BLOCK_BASE|0x64)
-#define RDSTB (LCD_CONTROL_BLOCK_BASE|0x68)
-#define ASY_DATA (LCD_CONTROL_BLOCK_BASE|0x6C)
-#define ASY_DATB (LCD_CONTROL_BLOCK_BASE|0x70)
-#define ASY_DATC (LCD_CONTROL_BLOCK_BASE|0x74)
-#define ASY_DATD (LCD_CONTROL_BLOCK_BASE|0x78)
-#define ASY_DATE (LCD_CONTROL_BLOCK_BASE|0x7C)
-#define ASY_DATF (LCD_CONTROL_BLOCK_BASE|0x80)
-#define ASY_DATG (LCD_CONTROL_BLOCK_BASE|0x84)
-#define ASY_DATH (LCD_CONTROL_BLOCK_BASE|0x88)
-#define ASY_CMDSET (LCD_CONTROL_BLOCK_BASE|0x8C)
-
-#define SSICTL (SPI_BLOCK_BASE|0x00)
-#define SSITIME (SPI_BLOCK_BASE|0x04)
-#define SSITX (SPI_BLOCK_BASE|0x08)
-#define SSIRX (SPI_BLOCK_BASE|0x0C)
-#define SSIINTC (SPI_BLOCK_BASE|0x10)
-#define SSIINTS (SPI_BLOCK_BASE|0x14)
-#define SSIDBG1 (SPI_BLOCK_BASE|0x18)
-#define SSIDBG2 (SPI_BLOCK_BASE|0x1C)
-#define SSIID (SPI_BLOCK_BASE|0x20)
-
-#define WKREQ (SYSTEM_BLOCK1_BASE|0x00)
-#define CLKENB (SYSTEM_BLOCK1_BASE|0x04)
-#define DRAMPWR (SYSTEM_BLOCK1_BASE|0x08)
-#define INTMASK (SYSTEM_BLOCK1_BASE|0x0C)
-#define GPIOSEL (SYSTEM_BLOCK2_BASE|0x00)
-
-#define GPIODATA (GPIO_BLOCK_BASE|0x00)
-#define GPIODIR (GPIO_BLOCK_BASE|0x04)
-#define GPIOIS (GPIO_BLOCK_BASE|0x08)
-#define GPIOIBE (GPIO_BLOCK_BASE|0x0C)
-#define GPIOIEV (GPIO_BLOCK_BASE|0x10)
-#define GPIOIE (GPIO_BLOCK_BASE|0x14)
-#define GPIORIS (GPIO_BLOCK_BASE|0x18)
-#define GPIOMIS (GPIO_BLOCK_BASE|0x1C)
-#define GPIOIC (GPIO_BLOCK_BASE|0x20)
-#define GPIOOMS (GPIO_BLOCK_BASE|0x24)
-#define GPIOPC (GPIO_BLOCK_BASE|0x28)
-#define GPIOID (GPIO_BLOCK_BASE|0x30)
-
-#define SPI_WRITE(reg, val) \
- { SSITX, 0x00010000 | (((reg) & 0xff) << 8) | ((val) & 0xff) }, \
- { 0, 5 },
-
-#define SPI_WRITE1(reg) \
- { SSITX, (reg) & 0xff }, \
- { 0, 5 },
-
-struct mddi_table {
- uint32_t reg;
- uint32_t value;
-};
-static struct mddi_table mddi_toshiba_init_table[] = {
- { DPSET0, 0x09e90046 },
- { DPSET1, 0x00000118 },
- { DPSUS, 0x00000000 },
- { DPRUN, 0x00000001 },
- { 1, 14 }, /* msleep 14 */
- { SYSCKENA, 0x00000001 },
- { CLKENB, 0x0000A1EF }, /* # SYS.CLKENB # Enable clocks for each module (without DCLK , i2cCLK) */
-
- { GPIODATA, 0x02000200 }, /* # GPI .GPIODATA # GPIO2(RESET_LCD_N) set to 0 , GPIO3(eDRAM_Power) set to 0 */
- { GPIODIR, 0x000030D }, /* 24D # GPI .GPIODIR # Select direction of GPIO port (0,2,3,6,9 output) */
- { GPIOSEL, 0/*0x00000173*/}, /* # SYS.GPIOSEL # GPIO port multiplexing control */
- { GPIOPC, 0x03C300C0 }, /* # GPI .GPIOPC # GPIO2,3 PD cut */
- { WKREQ, 0x00000000 }, /* # SYS.WKREQ # Wake-up request event is VSYNC alignment */
-
- { GPIOIBE, 0x000003FF },
- { GPIOIS, 0x00000000 },
- { GPIOIC, 0x000003FF },
- { GPIOIE, 0x00000000 },
-
- { GPIODATA, 0x00040004 }, /* # GPI .GPIODATA # eDRAM VD supply */
- { 1, 1 }, /* msleep 1 */
- { GPIODATA, 0x02040004 }, /* # GPI .GPIODATA # eDRAM VD supply */
- { DRAMPWR, 0x00000001 }, /* eDRAM power */
-};
-
-#define GPIOSEL_VWAKEINT (1U << 0)
-#define INTMASK_VWAKEOUT (1U << 0)
-
-
-static int trout_new_backlight = 1;
-static struct vreg *vreg_mddi_1v5;
-static struct vreg *vreg_lcm_2v85;
-
-static void trout_process_mddi_table(struct msm_mddi_client_data *client_data,
- struct mddi_table *table, size_t count)
-{
- int i;
- for (i = 0; i < count; i++) {
- uint32_t reg = table[i].reg;
- uint32_t value = table[i].value;
-
- if (reg == 0)
- udelay(value);
- else if (reg == 1)
- msleep(value);
- else
- client_data->remote_write(client_data, value, reg);
- }
-}
-
-static int trout_mddi_toshiba_client_init(
- struct msm_mddi_bridge_platform_data *bridge_data,
- struct msm_mddi_client_data *client_data)
-{
- int panel_id;
-
- client_data->auto_hibernate(client_data, 0);
- trout_process_mddi_table(client_data, mddi_toshiba_init_table,
- ARRAY_SIZE(mddi_toshiba_init_table));
- client_data->auto_hibernate(client_data, 1);
- panel_id = (client_data->remote_read(client_data, GPIODATA) >> 4) & 3;
- if (panel_id > 1) {
- printk(KERN_WARNING "unknown panel id at mddi_enable\n");
- return -1;
- }
- return 0;
-}
-
-static int trout_mddi_toshiba_client_uninit(
- struct msm_mddi_bridge_platform_data *bridge_data,
- struct msm_mddi_client_data *client_data)
-{
- return 0;
-}
-
-static struct resource resources_msm_fb[] = {
- {
- .start = MSM_FB_BASE,
- .end = MSM_FB_BASE + MSM_FB_SIZE,
- .flags = IORESOURCE_MEM,
- },
-};
-
-struct msm_mddi_bridge_platform_data toshiba_client_data = {
- .init = trout_mddi_toshiba_client_init,
- .uninit = trout_mddi_toshiba_client_uninit,
- .fb_data = {
- .xres = 320,
- .yres = 480,
- .width = 45,
- .height = 67,
- .output_format = 0,
- },
-};
-
-static struct msm_mddi_platform_data mddi_pdata = {
- .clk_rate = 122880000,
- .fb_resource = resources_msm_fb,
- .num_clients = 1,
- .client_platform_data = {
- {
- .product_id = (0xd263 << 16 | 0),
- .name = "mddi_c_d263_0000",
- .id = 0,
- .client_data = &toshiba_client_data,
- .clk_rate = 0,
- },
- },
-};
-
-int __init trout_init_panel(void)
-{
- int rc;
-
- if (!machine_is_trout())
- return 0;
- vreg_mddi_1v5 = vreg_get(0, "gp2");
- if (IS_ERR(vreg_mddi_1v5))
- return PTR_ERR(vreg_mddi_1v5);
- vreg_lcm_2v85 = vreg_get(0, "gp4");
- if (IS_ERR(vreg_lcm_2v85))
- return PTR_ERR(vreg_lcm_2v85);
-
- trout_new_backlight = system_rev >= 5;
- if (trout_new_backlight) {
- uint32_t config = PCOM_GPIO_CFG(27, 0, GPIO_OUTPUT,
- GPIO_NO_PULL, GPIO_8MA);
- msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, 0);
- } else {
- uint32_t config = PCOM_GPIO_CFG(27, 1, GPIO_OUTPUT,
- GPIO_NO_PULL, GPIO_8MA);
- uint32_t id = P_GP_CLK;
- uint32_t rate = 19200000;
-
- msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, 0);
-
- msm_proc_comm(PCOM_CLKCTL_RPC_SET_RATE, &id, &rate);
- if (id < 0)
- pr_err("trout_init_panel: set clock rate failed\n");
- }
-
- rc = platform_device_register(&msm_device_mdp);
- if (rc)
- return rc;
- msm_device_mddi0.dev.platform_data = &mddi_pdata;
- return platform_device_register(&msm_device_mddi0);
-}
-
-device_initcall(trout_init_panel);
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
deleted file mode 100644
index ba3edd3a46cb..000000000000
--- a/arch/arm/mach-msm/board-trout.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/* linux/arch/arm/mach-msm/board-trout.c
- *
- * Copyright (C) 2009 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-#define pr_fmt(fmt) "%s: " fmt, __func__
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/clkdev.h>
-#include <linux/memblock.h>
-
-#include <asm/system_info.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-
-#include <mach/hardware.h>
-#include <mach/msm_iomap.h>
-
-#include "devices.h"
-#include "board-trout.h"
-#include "common.h"
-
-extern int trout_init_mmc(unsigned int);
-
-static struct platform_device *devices[] __initdata = {
- &msm_clock_7x01a,
- &msm_device_gpio_7201,
- &msm_device_uart3,
- &msm_device_smd,
- &msm_device_nand,
- &msm_device_hsusb,
- &msm_device_i2c,
-};
-
-static void __init trout_init_early(void)
-{
- arch_ioremap_caller = __msm_ioremap_caller;
-}
-
-static void __init trout_init_irq(void)
-{
- msm_init_irq();
-}
-
-static void __init trout_fixup(struct tag *tags, char **cmdline)
-{
- memblock_add(PHYS_OFFSET, 101*SZ_1M);
-}
-
-static void __init trout_init(void)
-{
- int rc;
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- if (IS_ENABLED(CONFIG_MMC)) {
- rc = trout_init_mmc(system_rev);
- if (rc)
- pr_crit("MMC init failure (%d)\n", rc);
- }
-}
-
-static struct map_desc trout_io_desc[] __initdata = {
- {
- .virtual = (unsigned long)TROUT_CPLD_BASE,
- .pfn = __phys_to_pfn(TROUT_CPLD_START),
- .length = TROUT_CPLD_SIZE,
- .type = MT_DEVICE_NONSHARED
- }
-};
-
-static void __init trout_map_io(void)
-{
- msm_map_common_io();
- iotable_init(trout_io_desc, ARRAY_SIZE(trout_io_desc));
-
-#if defined(CONFIG_DEBUG_MSM_UART) && (CONFIG_DEBUG_UART_PHYS == 0xa9c00000)
- /* route UART3 to the "H2W" extended usb connector */
- writeb(0x80, TROUT_CPLD_BASE + 0x00);
-#endif
-}
-
-static void __init trout_init_late(void)
-{
- smd_debugfs_init();
-}
-
-MACHINE_START(TROUT, "HTC Dream")
- .atag_offset = 0x100,
- .fixup = trout_fixup,
- .map_io = trout_map_io,
- .init_early = trout_init_early,
- .init_irq = trout_init_irq,
- .init_machine = trout_init,
- .init_late = trout_init_late,
- .init_time = msm7x01_timer_init,
-MACHINE_END
diff --git a/arch/arm/mach-msm/board-trout.h b/arch/arm/mach-msm/board-trout.h
deleted file mode 100644
index adb757abbb92..000000000000
--- a/arch/arm/mach-msm/board-trout.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/* linux/arch/arm/mach-msm/board-trout.h
-** Author: Brian Swetland <swetland@google.com>
-*/
-#ifndef __ARCH_ARM_MACH_MSM_BOARD_TROUT_H
-#define __ARCH_ARM_MACH_MSM_BOARD_TROUT_H
-
-#include "common.h"
-
-#define MSM_SMI_BASE 0x00000000
-#define MSM_SMI_SIZE 0x00800000
-
-#define MSM_EBI_BASE 0x10000000
-#define MSM_EBI_SIZE 0x06e00000
-
-#define MSM_PMEM_GPU0_BASE 0x00000000
-#define MSM_PMEM_GPU0_SIZE 0x00700000
-
-#define MSM_PMEM_MDP_BASE 0x02000000
-#define MSM_PMEM_MDP_SIZE 0x00800000
-
-#define MSM_PMEM_ADSP_BASE 0x02800000
-#define MSM_PMEM_ADSP_SIZE 0x00800000
-
-#define MSM_PMEM_CAMERA_BASE 0x03000000
-#define MSM_PMEM_CAMERA_SIZE 0x00800000
-
-#define MSM_FB_BASE 0x03800000
-#define MSM_FB_SIZE 0x00100000
-
-#define MSM_LINUX_BASE MSM_EBI_BASE
-#define MSM_LINUX_SIZE 0x06500000
-
-#define MSM_PMEM_GPU1_SIZE 0x800000
-#define MSM_PMEM_GPU1_BASE (MSM_RAM_CONSOLE_BASE - MSM_PMEM_GPU1_SIZE)
-
-#define MSM_RAM_CONSOLE_BASE (MSM_EBI_BASE + 0x6d00000)
-#define MSM_RAM_CONSOLE_SIZE (128 * SZ_1K)
-
-#if (MSM_FB_BASE + MSM_FB_SIZE) >= (MSM_PMEM_GPU1_BASE)
-#error invalid memory map
-#endif
-
-#define DECLARE_MSM_IOMAP
-#include <mach/msm_iomap.h>
-
-#define TROUT_4_BALL_UP_0 1
-#define TROUT_4_BALL_LEFT_0 18
-#define TROUT_4_BALL_DOWN_0 57
-#define TROUT_4_BALL_RIGHT_0 91
-
-#define TROUT_5_BALL_UP_0 94
-#define TROUT_5_BALL_LEFT_0 18
-#define TROUT_5_BALL_DOWN_0 90
-#define TROUT_5_BALL_RIGHT_0 19
-
-#define TROUT_POWER_KEY 20
-
-#define TROUT_4_TP_LS_EN 19
-#define TROUT_5_TP_LS_EN 1
-
-#define TROUT_CPLD_BASE IOMEM(0xE8100000)
-#define TROUT_CPLD_START 0x98000000
-#define TROUT_CPLD_SIZE SZ_4K
-
-#define TROUT_GPIO_CABLE_IN1 (83)
-#define TROUT_GPIO_CABLE_IN2 (49)
-
-#define TROUT_GPIO_START (128)
-
-#define TROUT_GPIO_INT_MASK0_REG (0x0c)
-#define TROUT_GPIO_INT_STAT0_REG (0x0e)
-#define TROUT_GPIO_INT_MASK1_REG (0x14)
-#define TROUT_GPIO_INT_STAT1_REG (0x10)
-
-#define TROUT_GPIO_HAPTIC_PWM (28)
-#define TROUT_GPIO_PS_HOLD (25)
-
-#define TROUT_GPIO_MISC2_BASE (TROUT_GPIO_START + 0x00)
-#define TROUT_GPIO_MISC3_BASE (TROUT_GPIO_START + 0x08)
-#define TROUT_GPIO_MISC4_BASE (TROUT_GPIO_START + 0x10)
-#define TROUT_GPIO_MISC5_BASE (TROUT_GPIO_START + 0x18)
-#define TROUT_GPIO_INT2_BASE (TROUT_GPIO_START + 0x20)
-#define TROUT_GPIO_MISC1_BASE (TROUT_GPIO_START + 0x28)
-#define TROUT_GPIO_VIRTUAL_BASE (TROUT_GPIO_START + 0x30)
-#define TROUT_GPIO_INT5_BASE (TROUT_GPIO_START + 0x48)
-
-#define TROUT_GPIO_CHARGER_EN (TROUT_GPIO_MISC2_BASE + 0)
-#define TROUT_GPIO_ISET (TROUT_GPIO_MISC2_BASE + 1)
-#define TROUT_GPIO_H2W_DAT_DIR (TROUT_GPIO_MISC2_BASE + 2)
-#define TROUT_GPIO_H2W_CLK_DIR (TROUT_GPIO_MISC2_BASE + 3)
-#define TROUT_GPIO_H2W_DAT_GPO (TROUT_GPIO_MISC2_BASE + 4)
-#define TROUT_GPIO_H2W_CLK_GPO (TROUT_GPIO_MISC2_BASE + 5)
-#define TROUT_GPIO_H2W_SEL0 (TROUT_GPIO_MISC2_BASE + 6)
-#define TROUT_GPIO_H2W_SEL1 (TROUT_GPIO_MISC2_BASE + 7)
-
-#define TROUT_GPIO_SPOTLIGHT_EN (TROUT_GPIO_MISC3_BASE + 0)
-#define TROUT_GPIO_FLASH_EN (TROUT_GPIO_MISC3_BASE + 1)
-#define TROUT_GPIO_I2C_PULL (TROUT_GPIO_MISC3_BASE + 2)
-#define TROUT_GPIO_TP_I2C_PULL (TROUT_GPIO_MISC3_BASE + 3)
-#define TROUT_GPIO_TP_EN (TROUT_GPIO_MISC3_BASE + 4)
-#define TROUT_GPIO_JOG_EN (TROUT_GPIO_MISC3_BASE + 5)
-#define TROUT_GPIO_UI_LED_EN (TROUT_GPIO_MISC3_BASE + 6)
-#define TROUT_GPIO_QTKEY_LED_EN (TROUT_GPIO_MISC3_BASE + 7)
-
-#define TROUT_GPIO_VCM_PWDN (TROUT_GPIO_MISC4_BASE + 0)
-#define TROUT_GPIO_USB_H2W_SW (TROUT_GPIO_MISC4_BASE + 1)
-#define TROUT_GPIO_COMPASS_RST_N (TROUT_GPIO_MISC4_BASE + 2)
-#define TROUT_GPIO_HAPTIC_EN_UP (TROUT_GPIO_MISC4_BASE + 3)
-#define TROUT_GPIO_HAPTIC_EN_MAIN (TROUT_GPIO_MISC4_BASE + 4)
-#define TROUT_GPIO_USB_PHY_RST_N (TROUT_GPIO_MISC4_BASE + 5)
-#define TROUT_GPIO_WIFI_PA_RESETX (TROUT_GPIO_MISC4_BASE + 6)
-#define TROUT_GPIO_WIFI_EN (TROUT_GPIO_MISC4_BASE + 7)
-
-#define TROUT_GPIO_BT_32K_EN (TROUT_GPIO_MISC5_BASE + 0)
-#define TROUT_GPIO_MAC_32K_EN (TROUT_GPIO_MISC5_BASE + 1)
-#define TROUT_GPIO_MDDI_32K_EN (TROUT_GPIO_MISC5_BASE + 2)
-#define TROUT_GPIO_COMPASS_32K_EN (TROUT_GPIO_MISC5_BASE + 3)
-
-#define TROUT_GPIO_NAVI_ACT_N (TROUT_GPIO_INT2_BASE + 0)
-#define TROUT_GPIO_COMPASS_IRQ (TROUT_GPIO_INT2_BASE + 1)
-#define TROUT_GPIO_SLIDING_DET (TROUT_GPIO_INT2_BASE + 2)
-#define TROUT_GPIO_AUD_HSMIC_DET_N (TROUT_GPIO_INT2_BASE + 3)
-#define TROUT_GPIO_SD_DOOR_N (TROUT_GPIO_INT2_BASE + 4)
-#define TROUT_GPIO_CAM_BTN_STEP1_N (TROUT_GPIO_INT2_BASE + 5)
-#define TROUT_GPIO_CAM_BTN_STEP2_N (TROUT_GPIO_INT2_BASE + 6)
-#define TROUT_GPIO_TP_ATT_N (TROUT_GPIO_INT2_BASE + 7)
-#define TROUT_GPIO_BANK0_FIRST_INT_SOURCE (TROUT_GPIO_NAVI_ACT_N)
-#define TROUT_GPIO_BANK0_LAST_INT_SOURCE (TROUT_GPIO_TP_ATT_N)
-
-#define TROUT_GPIO_H2W_DAT_GPI (TROUT_GPIO_MISC1_BASE + 0)
-#define TROUT_GPIO_H2W_CLK_GPI (TROUT_GPIO_MISC1_BASE + 1)
-#define TROUT_GPIO_CPLD128_VER_0 (TROUT_GPIO_MISC1_BASE + 4)
-#define TROUT_GPIO_CPLD128_VER_1 (TROUT_GPIO_MISC1_BASE + 5)
-#define TROUT_GPIO_CPLD128_VER_2 (TROUT_GPIO_MISC1_BASE + 6)
-#define TROUT_GPIO_CPLD128_VER_3 (TROUT_GPIO_MISC1_BASE + 7)
-
-#define TROUT_GPIO_SDMC_CD_N (TROUT_GPIO_VIRTUAL_BASE + 0)
-#define TROUT_GPIO_END (TROUT_GPIO_SDMC_CD_N)
-#define TROUT_GPIO_BANK1_FIRST_INT_SOURCE (TROUT_GPIO_SDMC_CD_N)
-#define TROUT_GPIO_BANK1_LAST_INT_SOURCE (TROUT_GPIO_SDMC_CD_N)
-
-#define TROUT_GPIO_VIRTUAL_TO_REAL_OFFSET \
- (TROUT_GPIO_INT5_BASE - TROUT_GPIO_VIRTUAL_BASE)
-
-#define TROUT_INT_START (NR_MSM_IRQS + NR_GPIO_IRQS)
-#define TROUT_INT_BANK0_COUNT (8)
-#define TROUT_INT_BANK1_START (TROUT_INT_START + TROUT_INT_BANK0_COUNT)
-#define TROUT_INT_BANK1_COUNT (1)
-#define TROUT_INT_END (TROUT_INT_START + TROUT_INT_BANK0_COUNT + \
- TROUT_INT_BANK1_COUNT - 1)
-#define TROUT_GPIO_TO_INT(n) (((n) <= TROUT_GPIO_BANK0_LAST_INT_SOURCE) ? \
- (TROUT_INT_START - TROUT_GPIO_BANK0_FIRST_INT_SOURCE + (n)) : \
- (TROUT_INT_BANK1_START - TROUT_GPIO_BANK1_FIRST_INT_SOURCE + (n)))
-
-#define TROUT_INT_TO_BANK(n) ((n - TROUT_INT_START) / TROUT_INT_BANK0_COUNT)
-#define TROUT_INT_TO_MASK(n) (1U << ((n - TROUT_INT_START) & 7))
-#define TROUT_BANK_TO_MASK_REG(bank) \
- (bank ? TROUT_GPIO_INT_MASK1_REG : TROUT_GPIO_INT_MASK0_REG)
-#define TROUT_BANK_TO_STAT_REG(bank) \
- (bank ? TROUT_GPIO_INT_STAT1_REG : TROUT_GPIO_INT_STAT0_REG)
-
-#endif /* GUARD */
diff --git a/arch/arm/mach-msm/clock-pcom.c b/arch/arm/mach-msm/clock-pcom.c
deleted file mode 100644
index f5b69d736ee5..000000000000
--- a/arch/arm/mach-msm/clock-pcom.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007-2012, The Linux Foundation. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/clk-provider.h>
-#include <linux/clkdev.h>
-
-#include <mach/clk.h>
-
-#include "proc_comm.h"
-#include "clock.h"
-#include "clock-pcom.h"
-
-struct clk_pcom {
- unsigned id;
- unsigned long flags;
- struct msm_clk msm_clk;
-};
-
-static inline struct clk_pcom *to_clk_pcom(struct clk_hw *hw)
-{
- return container_of(to_msm_clk(hw), struct clk_pcom, msm_clk);
-}
-
-static int pc_clk_enable(struct clk_hw *hw)
-{
- unsigned id = to_clk_pcom(hw)->id;
- int rc = msm_proc_comm(PCOM_CLKCTL_RPC_ENABLE, &id, NULL);
- if (rc < 0)
- return rc;
- else
- return (int)id < 0 ? -EINVAL : 0;
-}
-
-static void pc_clk_disable(struct clk_hw *hw)
-{
- unsigned id = to_clk_pcom(hw)->id;
- msm_proc_comm(PCOM_CLKCTL_RPC_DISABLE, &id, NULL);
-}
-
-static int pc_clk_reset(struct clk_hw *hw, enum clk_reset_action action)
-{
- int rc;
- unsigned id = to_clk_pcom(hw)->id;
-
- if (action == CLK_RESET_ASSERT)
- rc = msm_proc_comm(PCOM_CLKCTL_RPC_RESET_ASSERT, &id, NULL);
- else
- rc = msm_proc_comm(PCOM_CLKCTL_RPC_RESET_DEASSERT, &id, NULL);
-
- if (rc < 0)
- return rc;
- else
- return (int)id < 0 ? -EINVAL : 0;
-}
-
-static int pc_clk_set_rate(struct clk_hw *hw, unsigned long new_rate,
- unsigned long p_rate)
-{
- struct clk_pcom *p = to_clk_pcom(hw);
- unsigned id = p->id, rate = new_rate;
- int rc;
-
- /*
- * The rate _might_ be rounded off to the nearest KHz value by the
- * remote function. So a return value of 0 doesn't necessarily mean
- * that the exact rate was set successfully.
- */
- if (p->flags & CLKFLAG_MIN)
- rc = msm_proc_comm(PCOM_CLKCTL_RPC_MIN_RATE, &id, &rate);
- else
- rc = msm_proc_comm(PCOM_CLKCTL_RPC_SET_RATE, &id, &rate);
- if (rc < 0)
- return rc;
- else
- return (int)id < 0 ? -EINVAL : 0;
-}
-
-static unsigned long pc_clk_recalc_rate(struct clk_hw *hw, unsigned long p_rate)
-{
- unsigned id = to_clk_pcom(hw)->id;
- if (msm_proc_comm(PCOM_CLKCTL_RPC_RATE, &id, NULL))
- return 0;
- else
- return id;
-}
-
-static int pc_clk_is_enabled(struct clk_hw *hw)
-{
- unsigned id = to_clk_pcom(hw)->id;
- if (msm_proc_comm(PCOM_CLKCTL_RPC_ENABLED, &id, NULL))
- return 0;
- else
- return id;
-}
-
-static long pc_clk_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *p_rate)
-{
- /* Not really supported; pc_clk_set_rate() does rounding on it's own. */
- return rate;
-}
-
-static struct clk_ops clk_ops_pcom = {
- .enable = pc_clk_enable,
- .disable = pc_clk_disable,
- .set_rate = pc_clk_set_rate,
- .recalc_rate = pc_clk_recalc_rate,
- .is_enabled = pc_clk_is_enabled,
- .round_rate = pc_clk_round_rate,
-};
-
-static int msm_clock_pcom_probe(struct platform_device *pdev)
-{
- const struct pcom_clk_pdata *pdata = pdev->dev.platform_data;
- int i, ret;
-
- for (i = 0; i < pdata->num_lookups; i++) {
- const struct clk_pcom_desc *desc = &pdata->lookup[i];
- struct clk *c;
- struct clk_pcom *p;
- struct clk_hw *hw;
- struct clk_init_data init;
-
- p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
- if (!p)
- return -ENOMEM;
-
- p->id = desc->id;
- p->flags = desc->flags;
- p->msm_clk.reset = pc_clk_reset;
-
- hw = &p->msm_clk.hw;
- hw->init = &init;
-
- init.name = desc->name;
- init.ops = &clk_ops_pcom;
- init.num_parents = 0;
- init.flags = CLK_IS_ROOT;
-
- if (!(p->flags & CLKFLAG_AUTO_OFF))
- init.flags |= CLK_IGNORE_UNUSED;
-
- c = devm_clk_register(&pdev->dev, hw);
- ret = clk_register_clkdev(c, desc->con, desc->dev);
- if (ret)
- return ret;
- }
-
- return 0;
-}
-
-static struct platform_driver msm_clock_pcom_driver = {
- .probe = msm_clock_pcom_probe,
- .driver = {
- .name = "msm-clock-pcom",
- },
-};
-module_platform_driver(msm_clock_pcom_driver);
-
-MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-msm/clock-pcom.h b/arch/arm/mach-msm/clock-pcom.h
deleted file mode 100644
index 5bb164fd46a8..000000000000
--- a/arch/arm/mach-msm/clock-pcom.h
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * Copyright (c) 2009-2012, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ARCH_ARM_MACH_MSM_CLOCK_PCOM_H
-#define __ARCH_ARM_MACH_MSM_CLOCK_PCOM_H
-
-/* clock IDs used by the modem processor */
-
-#define P_ACPU_CLK 0 /* Applications processor clock */
-#define P_ADM_CLK 1 /* Applications data mover clock */
-#define P_ADSP_CLK 2 /* ADSP clock */
-#define P_EBI1_CLK 3 /* External bus interface 1 clock */
-#define P_EBI2_CLK 4 /* External bus interface 2 clock */
-#define P_ECODEC_CLK 5 /* External CODEC clock */
-#define P_EMDH_CLK 6 /* External MDDI host clock */
-#define P_GP_CLK 7 /* General purpose clock */
-#define P_GRP_3D_CLK 8 /* Graphics clock */
-#define P_I2C_CLK 9 /* I2C clock */
-#define P_ICODEC_RX_CLK 10 /* Internal CODEX RX clock */
-#define P_ICODEC_TX_CLK 11 /* Internal CODEX TX clock */
-#define P_IMEM_CLK 12 /* Internal graphics memory clock */
-#define P_MDC_CLK 13 /* MDDI client clock */
-#define P_MDP_CLK 14 /* Mobile display processor clock */
-#define P_PBUS_CLK 15 /* Peripheral bus clock */
-#define P_PCM_CLK 16 /* PCM clock */
-#define P_PMDH_CLK 17 /* Primary MDDI host clock */
-#define P_SDAC_CLK 18 /* Stereo DAC clock */
-#define P_SDC1_CLK 19 /* Secure Digital Card clocks */
-#define P_SDC1_P_CLK 20
-#define P_SDC2_CLK 21
-#define P_SDC2_P_CLK 22
-#define P_SDC3_CLK 23
-#define P_SDC3_P_CLK 24
-#define P_SDC4_CLK 25
-#define P_SDC4_P_CLK 26
-#define P_TSIF_CLK 27 /* Transport Stream Interface clocks */
-#define P_TSIF_REF_CLK 28
-#define P_TV_DAC_CLK 29 /* TV clocks */
-#define P_TV_ENC_CLK 30
-#define P_UART1_CLK 31 /* UART clocks */
-#define P_UART2_CLK 32
-#define P_UART3_CLK 33
-#define P_UART1DM_CLK 34
-#define P_UART2DM_CLK 35
-#define P_USB_HS_CLK 36 /* High speed USB core clock */
-#define P_USB_HS_P_CLK 37 /* High speed USB pbus clock */
-#define P_USB_OTG_CLK 38 /* Full speed USB clock */
-#define P_VDC_CLK 39 /* Video controller clock */
-#define P_VFE_MDC_CLK 40 /* Camera / Video Front End clock */
-#define P_VFE_CLK 41 /* VFE MDDI client clock */
-#define P_MDP_LCDC_PCLK_CLK 42
-#define P_MDP_LCDC_PAD_PCLK_CLK 43
-#define P_MDP_VSYNC_CLK 44
-#define P_SPI_CLK 45
-#define P_VFE_AXI_CLK 46
-#define P_USB_HS2_CLK 47 /* High speed USB 2 core clock */
-#define P_USB_HS2_P_CLK 48 /* High speed USB 2 pbus clock */
-#define P_USB_HS3_CLK 49 /* High speed USB 3 core clock */
-#define P_USB_HS3_P_CLK 50 /* High speed USB 3 pbus clock */
-#define P_GRP_3D_P_CLK 51 /* Graphics pbus clock */
-#define P_USB_PHY_CLK 52 /* USB PHY clock */
-#define P_USB_HS_CORE_CLK 53 /* High speed USB 1 core clock */
-#define P_USB_HS2_CORE_CLK 54 /* High speed USB 2 core clock */
-#define P_USB_HS3_CORE_CLK 55 /* High speed USB 3 core clock */
-#define P_CAM_M_CLK 56
-#define P_CAMIF_PAD_P_CLK 57
-#define P_GRP_2D_CLK 58
-#define P_GRP_2D_P_CLK 59
-#define P_I2S_CLK 60
-#define P_JPEG_CLK 61
-#define P_JPEG_P_CLK 62
-#define P_LPA_CODEC_CLK 63
-#define P_LPA_CORE_CLK 64
-#define P_LPA_P_CLK 65
-#define P_MDC_IO_CLK 66
-#define P_MDC_P_CLK 67
-#define P_MFC_CLK 68
-#define P_MFC_DIV2_CLK 69
-#define P_MFC_P_CLK 70
-#define P_QUP_I2C_CLK 71
-#define P_ROTATOR_IMEM_CLK 72
-#define P_ROTATOR_P_CLK 73
-#define P_VFE_CAMIF_CLK 74
-#define P_VFE_P_CLK 75
-#define P_VPE_CLK 76
-#define P_I2C_2_CLK 77
-#define P_MI2S_CODEC_RX_S_CLK 78
-#define P_MI2S_CODEC_RX_M_CLK 79
-#define P_MI2S_CODEC_TX_S_CLK 80
-#define P_MI2S_CODEC_TX_M_CLK 81
-#define P_PMDH_P_CLK 82
-#define P_EMDH_P_CLK 83
-#define P_SPI_P_CLK 84
-#define P_TSIF_P_CLK 85
-#define P_MDP_P_CLK 86
-#define P_SDAC_M_CLK 87
-#define P_MI2S_S_CLK 88
-#define P_MI2S_M_CLK 89
-#define P_AXI_ROTATOR_CLK 90
-#define P_HDMI_CLK 91
-#define P_CSI0_CLK 92
-#define P_CSI0_VFE_CLK 93
-#define P_CSI0_P_CLK 94
-#define P_CSI1_CLK 95
-#define P_CSI1_VFE_CLK 96
-#define P_CSI1_P_CLK 97
-#define P_GSBI_CLK 98
-#define P_GSBI_P_CLK 99
-#define P_CE_CLK 100 /* Crypto engine */
-#define P_CODEC_SSBI_CLK 101
-
-#define P_NR_CLKS 102
-
-struct clk_pcom_desc {
- unsigned id;
- const char *name;
- const char *con;
- const char *dev;
- unsigned long flags;
-};
-
-struct pcom_clk_pdata {
- struct clk_pcom_desc *lookup;
- u32 num_lookups;
-};
-
-#define CLK_PCOM(clk_name, clk_id, clk_dev, clk_flags) { \
- .id = P_##clk_id, \
- .name = #clk_id, \
- .con = clk_name, \
- .dev = clk_dev, \
- .flags = clk_flags, \
- }
-
-#endif
diff --git a/arch/arm/mach-msm/clock.c b/arch/arm/mach-msm/clock.c
deleted file mode 100644
index 35ea02b52483..000000000000
--- a/arch/arm/mach-msm/clock.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/* arch/arm/mach-msm/clock.c
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007-2012, The Linux Foundation. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/clk-provider.h>
-#include <linux/module.h>
-
-#include "clock.h"
-
-int clk_reset(struct clk *clk, enum clk_reset_action action)
-{
- struct clk_hw *hw = __clk_get_hw(clk);
- struct msm_clk *m = to_msm_clk(hw);
- return m->reset(hw, action);
-}
-EXPORT_SYMBOL(clk_reset);
diff --git a/arch/arm/mach-msm/clock.h b/arch/arm/mach-msm/clock.h
deleted file mode 100644
index 42d29dd7aafc..000000000000
--- a/arch/arm/mach-msm/clock.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* arch/arm/mach-msm/clock.h
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007-2012, The Linux Foundation. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ARCH_ARM_MACH_MSM_CLOCK_H
-#define __ARCH_ARM_MACH_MSM_CLOCK_H
-
-#include <linux/clk-provider.h>
-#include <mach/clk.h>
-
-#define CLK_FIRST_AVAILABLE_FLAG 0x00000100
-#define CLKFLAG_AUTO_OFF 0x00000200
-#define CLKFLAG_MIN 0x00000400
-#define CLKFLAG_MAX 0x00000800
-
-#define OFF CLKFLAG_AUTO_OFF
-#define CLK_MIN CLKFLAG_MIN
-#define CLK_MAX CLKFLAG_MAX
-#define CLK_MINMAX (CLK_MIN | CLK_MAX)
-
-struct msm_clk {
- int (*reset)(struct clk_hw *hw, enum clk_reset_action action);
- struct clk_hw hw;
-};
-
-static inline struct msm_clk *to_msm_clk(struct clk_hw *hw)
-{
- return container_of(hw, struct msm_clk, hw);
-}
-
-#endif
diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h
deleted file mode 100644
index 572479a3c7be..000000000000
--- a/arch/arm/mach-msm/common.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* Copyright (c) 2012, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef __MACH_COMMON_H
-#define __MACH_COMMON_H
-
-extern void msm7x01_timer_init(void);
-extern void msm7x30_timer_init(void);
-extern void qsd8x50_timer_init(void);
-
-extern void msm_map_common_io(void);
-extern void msm_map_msm7x30_io(void);
-extern void msm_map_qsd8x50_io(void);
-
-extern void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size,
- unsigned int mtype, void *caller);
-
-struct msm_mmc_platform_data;
-
-extern void msm_add_devices(void);
-extern void msm_init_irq(void);
-extern void msm_init_gpio(void);
-extern int msm_add_sdcc(unsigned int controller,
- struct msm_mmc_platform_data *plat,
- unsigned int stat_irq, unsigned long stat_irq_flags);
-
-#if defined(CONFIG_MSM_SMD) && defined(CONFIG_DEBUG_FS)
-extern int smd_debugfs_init(void);
-#else
-static inline int smd_debugfs_init(void) { return 0; }
-#endif
-
-#endif
diff --git a/arch/arm/mach-msm/devices-msm7x00.c b/arch/arm/mach-msm/devices-msm7x00.c
deleted file mode 100644
index d83404d4b328..000000000000
--- a/arch/arm/mach-msm/devices-msm7x00.c
+++ /dev/null
@@ -1,480 +0,0 @@
-/* linux/arch/arm/mach-msm/devices.c
- *
- * Copyright (C) 2008 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/clkdev.h>
-
-#include <mach/irqs.h>
-#include <mach/msm_iomap.h>
-#include "devices.h"
-
-#include <asm/mach/flash.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-#include "clock.h"
-#include "clock-pcom.h"
-#include <linux/platform_data/mmc-msm_sdcc.h>
-
-static struct resource msm_gpio_resources[] = {
- {
- .start = 32 + 0,
- .end = 32 + 0,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = 32 + 1,
- .end = 32 + 1,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = 0xa9200800,
- .end = 0xa9200800 + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- .name = "gpio1"
- },
- {
- .start = 0xa9300C00,
- .end = 0xa9300C00 + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- .name = "gpio2"
- },
-};
-
-struct platform_device msm_device_gpio_7201 = {
- .name = "gpio-msm-7201",
- .num_resources = ARRAY_SIZE(msm_gpio_resources),
- .resource = msm_gpio_resources,
-};
-
-static struct resource resources_uart1[] = {
- {
- .start = INT_UART1,
- .end = INT_UART1,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = MSM_UART1_PHYS,
- .end = MSM_UART1_PHYS + MSM_UART1_SIZE - 1,
- .flags = IORESOURCE_MEM,
- .name = "uart_resource"
- },
-};
-
-static struct resource resources_uart2[] = {
- {
- .start = INT_UART2,
- .end = INT_UART2,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = MSM_UART2_PHYS,
- .end = MSM_UART2_PHYS + MSM_UART2_SIZE - 1,
- .flags = IORESOURCE_MEM,
- .name = "uart_resource"
- },
-};
-
-static struct resource resources_uart3[] = {
- {
- .start = INT_UART3,
- .end = INT_UART3,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = MSM_UART3_PHYS,
- .end = MSM_UART3_PHYS + MSM_UART3_SIZE - 1,
- .flags = IORESOURCE_MEM,
- .name = "uart_resource"
- },
-};
-
-struct platform_device msm_device_uart1 = {
- .name = "msm_serial",
- .id = 0,
- .num_resources = ARRAY_SIZE(resources_uart1),
- .resource = resources_uart1,
-};
-
-struct platform_device msm_device_uart2 = {
- .name = "msm_serial",
- .id = 1,
- .num_resources = ARRAY_SIZE(resources_uart2),
- .resource = resources_uart2,
-};
-
-struct platform_device msm_device_uart3 = {
- .name = "msm_serial",
- .id = 2,
- .num_resources = ARRAY_SIZE(resources_uart3),
- .resource = resources_uart3,
-};
-
-static struct resource resources_i2c[] = {
- {
- .start = MSM_I2C_PHYS,
- .end = MSM_I2C_PHYS + MSM_I2C_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = INT_PWB_I2C,
- .end = INT_PWB_I2C,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device msm_device_i2c = {
- .name = "msm_i2c",
- .id = 0,
- .num_resources = ARRAY_SIZE(resources_i2c),
- .resource = resources_i2c,
-};
-
-static struct resource resources_hsusb[] = {
- {
- .start = MSM_HSUSB_PHYS,
- .end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = INT_USB_HS,
- .end = INT_USB_HS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device msm_device_hsusb = {
- .name = "msm_hsusb",
- .id = -1,
- .num_resources = ARRAY_SIZE(resources_hsusb),
- .resource = resources_hsusb,
- .dev = {
- .coherent_dma_mask = 0xffffffff,
- },
-};
-
-struct flash_platform_data msm_nand_data = {
- .parts = NULL,
- .nr_parts = 0,
-};
-
-static struct resource resources_nand[] = {
- [0] = {
- .start = 7,
- .end = 7,
- .flags = IORESOURCE_DMA,
- },
-};
-
-struct platform_device msm_device_nand = {
- .name = "msm_nand",
- .id = -1,
- .num_resources = ARRAY_SIZE(resources_nand),
- .resource = resources_nand,
- .dev = {
- .platform_data = &msm_nand_data,
- },
-};
-
-struct platform_device msm_device_smd = {
- .name = "msm_smd",
- .id = -1,
-};
-
-static struct resource resources_sdc1[] = {
- {
- .start = MSM_SDC1_PHYS,
- .end = MSM_SDC1_PHYS + MSM_SDC1_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = INT_SDC1_0,
- .end = INT_SDC1_0,
- .flags = IORESOURCE_IRQ,
- .name = "cmd_irq",
- },
- {
- .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED,
- .name = "status_irq"
- },
- {
- .start = 8,
- .end = 8,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static struct resource resources_sdc2[] = {
- {
- .start = MSM_SDC2_PHYS,
- .end = MSM_SDC2_PHYS + MSM_SDC2_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = INT_SDC2_0,
- .end = INT_SDC2_0,
- .flags = IORESOURCE_IRQ,
- .name = "cmd_irq",
- },
- {
- .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED,
- .name = "status_irq"
- },
- {
- .start = 8,
- .end = 8,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static struct resource resources_sdc3[] = {
- {
- .start = MSM_SDC3_PHYS,
- .end = MSM_SDC3_PHYS + MSM_SDC3_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = INT_SDC3_0,
- .end = INT_SDC3_0,
- .flags = IORESOURCE_IRQ,
- .name = "cmd_irq",
- },
- {
- .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED,
- .name = "status_irq"
- },
- {
- .start = 8,
- .end = 8,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static struct resource resources_sdc4[] = {
- {
- .start = MSM_SDC4_PHYS,
- .end = MSM_SDC4_PHYS + MSM_SDC4_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = INT_SDC4_0,
- .end = INT_SDC4_0,
- .flags = IORESOURCE_IRQ,
- .name = "cmd_irq",
- },
- {
- .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED,
- .name = "status_irq"
- },
- {
- .start = 8,
- .end = 8,
- .flags = IORESOURCE_DMA,
- },
-};
-
-struct platform_device msm_device_sdc1 = {
- .name = "msm_sdcc",
- .id = 1,
- .num_resources = ARRAY_SIZE(resources_sdc1),
- .resource = resources_sdc1,
- .dev = {
- .coherent_dma_mask = 0xffffffff,
- },
-};
-
-struct platform_device msm_device_sdc2 = {
- .name = "msm_sdcc",
- .id = 2,
- .num_resources = ARRAY_SIZE(resources_sdc2),
- .resource = resources_sdc2,
- .dev = {
- .coherent_dma_mask = 0xffffffff,
- },
-};
-
-struct platform_device msm_device_sdc3 = {
- .name = "msm_sdcc",
- .id = 3,
- .num_resources = ARRAY_SIZE(resources_sdc3),
- .resource = resources_sdc3,
- .dev = {
- .coherent_dma_mask = 0xffffffff,
- },
-};
-
-struct platform_device msm_device_sdc4 = {
- .name = "msm_sdcc",
- .id = 4,
- .num_resources = ARRAY_SIZE(resources_sdc4),
- .resource = resources_sdc4,
- .dev = {
- .coherent_dma_mask = 0xffffffff,
- },
-};
-
-static struct platform_device *msm_sdcc_devices[] __initdata = {
- &msm_device_sdc1,
- &msm_device_sdc2,
- &msm_device_sdc3,
- &msm_device_sdc4,
-};
-
-int __init msm_add_sdcc(unsigned int controller,
- struct msm_mmc_platform_data *plat,
- unsigned int stat_irq, unsigned long stat_irq_flags)
-{
- struct platform_device *pdev;
- struct resource *res;
-
- if (controller < 1 || controller > 4)
- return -EINVAL;
-
- pdev = msm_sdcc_devices[controller-1];
- pdev->dev.platform_data = plat;
-
- res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "status_irq");
- if (!res)
- return -EINVAL;
- else if (stat_irq) {
- res->start = res->end = stat_irq;
- res->flags &= ~IORESOURCE_DISABLED;
- res->flags |= stat_irq_flags;
- }
-
- return platform_device_register(pdev);
-}
-
-static struct resource resources_mddi0[] = {
- {
- .start = MSM_PMDH_PHYS,
- .end = MSM_PMDH_PHYS + MSM_PMDH_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = INT_MDDI_PRI,
- .end = INT_MDDI_PRI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource resources_mddi1[] = {
- {
- .start = MSM_EMDH_PHYS,
- .end = MSM_EMDH_PHYS + MSM_EMDH_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = INT_MDDI_EXT,
- .end = INT_MDDI_EXT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device msm_device_mddi0 = {
- .name = "msm_mddi",
- .id = 0,
- .num_resources = ARRAY_SIZE(resources_mddi0),
- .resource = resources_mddi0,
- .dev = {
- .coherent_dma_mask = 0xffffffff,
- },
-};
-
-struct platform_device msm_device_mddi1 = {
- .name = "msm_mddi",
- .id = 1,
- .num_resources = ARRAY_SIZE(resources_mddi1),
- .resource = resources_mddi1,
- .dev = {
- .coherent_dma_mask = 0xffffffff,
- },
-};
-
-static struct resource resources_mdp[] = {
- {
- .start = MSM_MDP_PHYS,
- .end = MSM_MDP_PHYS + MSM_MDP_SIZE - 1,
- .name = "mdp",
- .flags = IORESOURCE_MEM
- },
- {
- .start = INT_MDP,
- .end = INT_MDP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device msm_device_mdp = {
- .name = "msm_mdp",
- .id = 0,
- .num_resources = ARRAY_SIZE(resources_mdp),
- .resource = resources_mdp,
-};
-
-static struct clk_pcom_desc msm_clocks_7x01a[] = {
- CLK_PCOM("adm_clk", ADM_CLK, NULL, 0),
- CLK_PCOM("adsp_clk", ADSP_CLK, NULL, 0),
- CLK_PCOM("ebi1_clk", EBI1_CLK, NULL, 0),
- CLK_PCOM("ebi2_clk", EBI2_CLK, NULL, 0),
- CLK_PCOM("ecodec_clk", ECODEC_CLK, NULL, 0),
- CLK_PCOM("emdh_clk", EMDH_CLK, NULL, OFF),
- CLK_PCOM("gp_clk", GP_CLK, NULL, 0),
- CLK_PCOM("grp_clk", GRP_3D_CLK, NULL, OFF),
- CLK_PCOM("i2c_clk", I2C_CLK, "msm_i2c.0", 0),
- CLK_PCOM("icodec_rx_clk", ICODEC_RX_CLK, NULL, 0),
- CLK_PCOM("icodec_tx_clk", ICODEC_TX_CLK, NULL, 0),
- CLK_PCOM("imem_clk", IMEM_CLK, NULL, OFF),
- CLK_PCOM("mdc_clk", MDC_CLK, NULL, 0),
- CLK_PCOM("mdp_clk", MDP_CLK, NULL, OFF),
- CLK_PCOM("pbus_clk", PBUS_CLK, NULL, 0),
- CLK_PCOM("pcm_clk", PCM_CLK, NULL, 0),
- CLK_PCOM("mddi_clk", PMDH_CLK, NULL, OFF | CLK_MINMAX),
- CLK_PCOM("sdac_clk", SDAC_CLK, NULL, OFF),
- CLK_PCOM("sdc_clk", SDC1_CLK, "msm_sdcc.1", OFF),
- CLK_PCOM("sdc_pclk", SDC1_P_CLK, "msm_sdcc.1", OFF),
- CLK_PCOM("sdc_clk", SDC2_CLK, "msm_sdcc.2", OFF),
- CLK_PCOM("sdc_pclk", SDC2_P_CLK, "msm_sdcc.2", OFF),
- CLK_PCOM("sdc_clk", SDC3_CLK, "msm_sdcc.3", OFF),
- CLK_PCOM("sdc_pclk", SDC3_P_CLK, "msm_sdcc.3", OFF),
- CLK_PCOM("sdc_clk", SDC4_CLK, "msm_sdcc.4", OFF),
- CLK_PCOM("sdc_pclk", SDC4_P_CLK, "msm_sdcc.4", OFF),
- CLK_PCOM("tsif_clk", TSIF_CLK, NULL, 0),
- CLK_PCOM("tsif_ref_clk", TSIF_REF_CLK, NULL, 0),
- CLK_PCOM("tv_dac_clk", TV_DAC_CLK, NULL, 0),
- CLK_PCOM("tv_enc_clk", TV_ENC_CLK, NULL, 0),
- CLK_PCOM("core", UART1_CLK, "msm_serial.0", OFF),
- CLK_PCOM("core", UART2_CLK, "msm_serial.1", 0),
- CLK_PCOM("core", UART3_CLK, "msm_serial.2", OFF),
- CLK_PCOM("uart1dm_clk", UART1DM_CLK, NULL, OFF),
- CLK_PCOM("uart2dm_clk", UART2DM_CLK, NULL, 0),
- CLK_PCOM("usb_hs_clk", USB_HS_CLK, "msm_hsusb", OFF),
- CLK_PCOM("usb_hs_pclk", USB_HS_P_CLK, "msm_hsusb", OFF),
- CLK_PCOM("usb_otg_clk", USB_OTG_CLK, NULL, 0),
- CLK_PCOM("vdc_clk", VDC_CLK, NULL, OFF ),
- CLK_PCOM("vfe_clk", VFE_CLK, NULL, OFF),
- CLK_PCOM("vfe_mdc_clk", VFE_MDC_CLK, NULL, OFF),
-};
-
-static struct pcom_clk_pdata msm_clock_7x01a_pdata = {
- .lookup = msm_clocks_7x01a,
- .num_lookups = ARRAY_SIZE(msm_clocks_7x01a),
-};
-
-struct platform_device msm_clock_7x01a = {
- .name = "msm-clock-pcom",
- .dev.platform_data = &msm_clock_7x01a_pdata,
-};
diff --git a/arch/arm/mach-msm/devices-msm7x30.c b/arch/arm/mach-msm/devices-msm7x30.c
deleted file mode 100644
index c15ea8ab20a7..000000000000
--- a/arch/arm/mach-msm/devices-msm7x30.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * Copyright (C) 2008 Google, Inc.
- * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <linux/dma-mapping.h>
-#include <linux/clkdev.h>
-#include <mach/irqs.h>
-#include <mach/msm_iomap.h>
-#include <mach/dma.h>
-
-#include "devices.h"
-#include "smd_private.h"
-#include "common.h"
-
-#include <asm/mach/flash.h>
-
-#include "clock.h"
-#include "clock-pcom.h"
-
-#include <linux/platform_data/mmc-msm_sdcc.h>
-
-static struct resource msm_gpio_resources[] = {
- {
- .start = 32 + 18,
- .end = 32 + 18,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = 32 + 19,
- .end = 32 + 19,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = 0xac001000,
- .end = 0xac001000 + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- .name = "gpio1"
- },
- {
- .start = 0xac101400,
- .end = 0xac101400 + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- .name = "gpio2"
- },
-};
-
-struct platform_device msm_device_gpio_7x30 = {
- .name = "gpio-msm-7x30",
- .num_resources = ARRAY_SIZE(msm_gpio_resources),
- .resource = msm_gpio_resources,
-};
-
-static struct resource resources_uart2[] = {
- {
- .start = INT_UART2,
- .end = INT_UART2,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = MSM_UART2_PHYS,
- .end = MSM_UART2_PHYS + MSM_UART2_SIZE - 1,
- .flags = IORESOURCE_MEM,
- .name = "uart_resource"
- },
-};
-
-struct platform_device msm_device_uart2 = {
- .name = "msm_serial",
- .id = 1,
- .num_resources = ARRAY_SIZE(resources_uart2),
- .resource = resources_uart2,
-};
-
-struct platform_device msm_device_smd = {
- .name = "msm_smd",
- .id = -1,
-};
-
-static struct resource resources_otg[] = {
- {
- .start = MSM_HSUSB_PHYS,
- .end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = INT_USB_HS,
- .end = INT_USB_HS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device msm_device_otg = {
- .name = "msm_otg",
- .id = -1,
- .num_resources = ARRAY_SIZE(resources_otg),
- .resource = resources_otg,
- .dev = {
- .coherent_dma_mask = 0xffffffff,
- },
-};
-
-static struct resource resources_hsusb[] = {
- {
- .start = MSM_HSUSB_PHYS,
- .end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = INT_USB_HS,
- .end = INT_USB_HS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device msm_device_hsusb = {
- .name = "msm_hsusb",
- .id = -1,
- .num_resources = ARRAY_SIZE(resources_hsusb),
- .resource = resources_hsusb,
- .dev = {
- .coherent_dma_mask = 0xffffffff,
- },
-};
-
-static u64 dma_mask = 0xffffffffULL;
-static struct resource resources_hsusb_host[] = {
- {
- .start = MSM_HSUSB_PHYS,
- .end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = INT_USB_HS,
- .end = INT_USB_HS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device msm_device_hsusb_host = {
- .name = "msm_hsusb_host",
- .id = -1,
- .num_resources = ARRAY_SIZE(resources_hsusb_host),
- .resource = resources_hsusb_host,
- .dev = {
- .dma_mask = &dma_mask,
- .coherent_dma_mask = 0xffffffffULL,
- },
-};
-
-static struct clk_pcom_desc msm_clocks_7x30[] = {
- CLK_PCOM("adm_clk", ADM_CLK, NULL, 0),
- CLK_PCOM("adsp_clk", ADSP_CLK, NULL, 0),
- CLK_PCOM("cam_m_clk", CAM_M_CLK, NULL, 0),
- CLK_PCOM("camif_pad_pclk", CAMIF_PAD_P_CLK, NULL, OFF),
- CLK_PCOM("ce_clk", CE_CLK, NULL, 0),
- CLK_PCOM("codec_ssbi_clk", CODEC_SSBI_CLK, NULL, 0),
- CLK_PCOM("ebi1_clk", EBI1_CLK, NULL, CLK_MIN),
- CLK_PCOM("ecodec_clk", ECODEC_CLK, NULL, 0),
- CLK_PCOM("emdh_clk", EMDH_CLK, NULL, OFF | CLK_MINMAX),
- CLK_PCOM("emdh_pclk", EMDH_P_CLK, NULL, OFF),
- CLK_PCOM("gp_clk", GP_CLK, NULL, 0),
- CLK_PCOM("grp_2d_clk", GRP_2D_CLK, NULL, 0),
- CLK_PCOM("grp_2d_pclk", GRP_2D_P_CLK, NULL, 0),
- CLK_PCOM("grp_clk", GRP_3D_CLK, NULL, 0),
- CLK_PCOM("grp_pclk", GRP_3D_P_CLK, NULL, 0),
- CLK_PCOM("hdmi_clk", HDMI_CLK, NULL, 0),
- CLK_PCOM("imem_clk", IMEM_CLK, NULL, OFF),
- CLK_PCOM("jpeg_clk", JPEG_CLK, NULL, OFF),
- CLK_PCOM("jpeg_pclk", JPEG_P_CLK, NULL, OFF),
- CLK_PCOM("lpa_codec_clk", LPA_CODEC_CLK, NULL, 0),
- CLK_PCOM("lpa_core_clk", LPA_CORE_CLK, NULL, 0),
- CLK_PCOM("lpa_pclk", LPA_P_CLK, NULL, 0),
- CLK_PCOM("mdc_clk", MDC_CLK, NULL, 0),
- CLK_PCOM("mddi_clk", PMDH_CLK, NULL, OFF | CLK_MINMAX),
- CLK_PCOM("mddi_pclk", PMDH_P_CLK, NULL, 0),
- CLK_PCOM("mdp_clk", MDP_CLK, NULL, OFF),
- CLK_PCOM("mdp_pclk", MDP_P_CLK, NULL, 0),
- CLK_PCOM("mdp_lcdc_pclk_clk", MDP_LCDC_PCLK_CLK, NULL, 0),
- CLK_PCOM("mdp_lcdc_pad_pclk_clk", MDP_LCDC_PAD_PCLK_CLK, NULL, 0),
- CLK_PCOM("mdp_vsync_clk", MDP_VSYNC_CLK, NULL, 0),
- CLK_PCOM("mfc_clk", MFC_CLK, NULL, 0),
- CLK_PCOM("mfc_div2_clk", MFC_DIV2_CLK, NULL, 0),
- CLK_PCOM("mfc_pclk", MFC_P_CLK, NULL, 0),
- CLK_PCOM("mi2s_m_clk", MI2S_M_CLK, NULL, 0),
- CLK_PCOM("mi2s_s_clk", MI2S_S_CLK, NULL, 0),
- CLK_PCOM("mi2s_codec_rx_m_clk", MI2S_CODEC_RX_M_CLK, NULL, 0),
- CLK_PCOM("mi2s_codec_rx_s_clk", MI2S_CODEC_RX_S_CLK, NULL, 0),
- CLK_PCOM("mi2s_codec_tx_m_clk", MI2S_CODEC_TX_M_CLK, NULL, 0),
- CLK_PCOM("mi2s_codec_tx_s_clk", MI2S_CODEC_TX_S_CLK, NULL, 0),
- CLK_PCOM("pbus_clk", PBUS_CLK, NULL, CLK_MIN),
- CLK_PCOM("pcm_clk", PCM_CLK, NULL, 0),
- CLK_PCOM("rotator_clk", AXI_ROTATOR_CLK, NULL, 0),
- CLK_PCOM("rotator_imem_clk", ROTATOR_IMEM_CLK, NULL, OFF),
- CLK_PCOM("rotator_pclk", ROTATOR_P_CLK, NULL, OFF),
- CLK_PCOM("sdac_clk", SDAC_CLK, NULL, OFF),
- CLK_PCOM("spi_clk", SPI_CLK, NULL, 0),
- CLK_PCOM("spi_pclk", SPI_P_CLK, NULL, 0),
- CLK_PCOM("tv_dac_clk", TV_DAC_CLK, NULL, 0),
- CLK_PCOM("tv_enc_clk", TV_ENC_CLK, NULL, 0),
- CLK_PCOM("core", UART2_CLK, "msm_serial.1", 0),
- CLK_PCOM("usb_phy_clk", USB_PHY_CLK, NULL, 0),
- CLK_PCOM("usb_hs_clk", USB_HS_CLK, NULL, OFF),
- CLK_PCOM("usb_hs_pclk", USB_HS_P_CLK, NULL, OFF),
- CLK_PCOM("usb_hs_core_clk", USB_HS_CORE_CLK, NULL, OFF),
- CLK_PCOM("usb_hs2_clk", USB_HS2_CLK, NULL, OFF),
- CLK_PCOM("usb_hs2_pclk", USB_HS2_P_CLK, NULL, OFF),
- CLK_PCOM("usb_hs2_core_clk", USB_HS2_CORE_CLK, NULL, OFF),
- CLK_PCOM("usb_hs3_clk", USB_HS3_CLK, NULL, OFF),
- CLK_PCOM("usb_hs3_pclk", USB_HS3_P_CLK, NULL, OFF),
- CLK_PCOM("usb_hs3_core_clk", USB_HS3_CORE_CLK, NULL, OFF),
- CLK_PCOM("vdc_clk", VDC_CLK, NULL, OFF | CLK_MIN),
- CLK_PCOM("vfe_camif_clk", VFE_CAMIF_CLK, NULL, 0),
- CLK_PCOM("vfe_clk", VFE_CLK, NULL, 0),
- CLK_PCOM("vfe_mdc_clk", VFE_MDC_CLK, NULL, 0),
- CLK_PCOM("vfe_pclk", VFE_P_CLK, NULL, OFF),
- CLK_PCOM("vpe_clk", VPE_CLK, NULL, 0),
-
- /* 7x30 v2 hardware only. */
- CLK_PCOM("csi_clk", CSI0_CLK, NULL, 0),
- CLK_PCOM("csi_pclk", CSI0_P_CLK, NULL, 0),
- CLK_PCOM("csi_vfe_clk", CSI0_VFE_CLK, NULL, 0),
-};
-
-static struct pcom_clk_pdata msm_clock_7x30_pdata = {
- .lookup = msm_clocks_7x30,
- .num_lookups = ARRAY_SIZE(msm_clocks_7x30),
-};
-
-struct platform_device msm_clock_7x30 = {
- .name = "msm-clock-pcom",
- .dev.platform_data = &msm_clock_7x30_pdata,
-};
diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c
deleted file mode 100644
index 9e1e9ce07b1a..000000000000
--- a/arch/arm/mach-msm/devices-qsd8x50.c
+++ /dev/null
@@ -1,388 +0,0 @@
-/*
- * Copyright (C) 2008 Google, Inc.
- * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/clkdev.h>
-#include <linux/dma-mapping.h>
-
-#include <mach/irqs.h>
-#include <mach/msm_iomap.h>
-#include <mach/dma.h>
-
-#include "devices.h"
-#include "common.h"
-
-#include <asm/mach/flash.h>
-
-#include <linux/platform_data/mmc-msm_sdcc.h>
-#include "clock.h"
-#include "clock-pcom.h"
-
-static struct resource msm_gpio_resources[] = {
- {
- .start = 64 + 165 + 9,
- .end = 64 + 165 + 9,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = 64 + 165 + 10,
- .end = 64 + 165 + 10,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = 0xa9000800,
- .end = 0xa9000800 + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- .name = "gpio1"
- },
- {
- .start = 0xa9100C00,
- .end = 0xa9100C00 + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- .name = "gpio2"
- },
-};
-
-struct platform_device msm_device_gpio_8x50 = {
- .name = "gpio-msm-8x50",
- .num_resources = ARRAY_SIZE(msm_gpio_resources),
- .resource = msm_gpio_resources,
-};
-
-static struct resource resources_uart3[] = {
- {
- .start = INT_UART3,
- .end = INT_UART3,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = MSM_UART3_PHYS,
- .end = MSM_UART3_PHYS + MSM_UART3_SIZE - 1,
- .flags = IORESOURCE_MEM,
- .name = "uart_resource"
- },
-};
-
-struct platform_device msm_device_uart3 = {
- .name = "msm_serial",
- .id = 2,
- .num_resources = ARRAY_SIZE(resources_uart3),
- .resource = resources_uart3,
-};
-
-struct platform_device msm_device_smd = {
- .name = "msm_smd",
- .id = -1,
-};
-
-static struct resource resources_otg[] = {
- {
- .start = MSM_HSUSB_PHYS,
- .end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = INT_USB_HS,
- .end = INT_USB_HS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device msm_device_otg = {
- .name = "msm_otg",
- .id = -1,
- .num_resources = ARRAY_SIZE(resources_otg),
- .resource = resources_otg,
- .dev = {
- .coherent_dma_mask = 0xffffffff,
- },
-};
-
-static struct resource resources_hsusb[] = {
- {
- .start = MSM_HSUSB_PHYS,
- .end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = INT_USB_HS,
- .end = INT_USB_HS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device msm_device_hsusb = {
- .name = "msm_hsusb",
- .id = -1,
- .num_resources = ARRAY_SIZE(resources_hsusb),
- .resource = resources_hsusb,
- .dev = {
- .coherent_dma_mask = 0xffffffff,
- },
-};
-
-static u64 dma_mask = 0xffffffffULL;
-static struct resource resources_hsusb_host[] = {
- {
- .start = MSM_HSUSB_PHYS,
- .end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = INT_USB_HS,
- .end = INT_USB_HS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device msm_device_hsusb_host = {
- .name = "msm_hsusb_host",
- .id = -1,
- .num_resources = ARRAY_SIZE(resources_hsusb_host),
- .resource = resources_hsusb_host,
- .dev = {
- .dma_mask = &dma_mask,
- .coherent_dma_mask = 0xffffffffULL,
- },
-};
-
-static struct resource resources_sdc1[] = {
- {
- .start = MSM_SDC1_PHYS,
- .end = MSM_SDC1_PHYS + MSM_SDC1_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = INT_SDC1_0,
- .end = INT_SDC1_0,
- .flags = IORESOURCE_IRQ,
- .name = "cmd_irq",
- },
- {
- .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED,
- .name = "status_irq"
- },
- {
- .start = 8,
- .end = 8,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static struct resource resources_sdc2[] = {
- {
- .start = MSM_SDC2_PHYS,
- .end = MSM_SDC2_PHYS + MSM_SDC2_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = INT_SDC2_0,
- .end = INT_SDC2_0,
- .flags = IORESOURCE_IRQ,
- .name = "cmd_irq",
- },
- {
- .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED,
- .name = "status_irq"
- },
- {
- .start = 8,
- .end = 8,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static struct resource resources_sdc3[] = {
- {
- .start = MSM_SDC3_PHYS,
- .end = MSM_SDC3_PHYS + MSM_SDC3_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = INT_SDC3_0,
- .end = INT_SDC3_0,
- .flags = IORESOURCE_IRQ,
- .name = "cmd_irq",
- },
- {
- .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED,
- .name = "status_irq"
- },
- {
- .start = 8,
- .end = 8,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static struct resource resources_sdc4[] = {
- {
- .start = MSM_SDC4_PHYS,
- .end = MSM_SDC4_PHYS + MSM_SDC4_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = INT_SDC4_0,
- .end = INT_SDC4_0,
- .flags = IORESOURCE_IRQ,
- .name = "cmd_irq",
- },
- {
- .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED,
- .name = "status_irq"
- },
- {
- .start = 8,
- .end = 8,
- .flags = IORESOURCE_DMA,
- },
-};
-
-struct platform_device msm_device_sdc1 = {
- .name = "msm_sdcc",
- .id = 1,
- .num_resources = ARRAY_SIZE(resources_sdc1),
- .resource = resources_sdc1,
- .dev = {
- .coherent_dma_mask = 0xffffffff,
- },
-};
-
-struct platform_device msm_device_sdc2 = {
- .name = "msm_sdcc",
- .id = 2,
- .num_resources = ARRAY_SIZE(resources_sdc2),
- .resource = resources_sdc2,
- .dev = {
- .coherent_dma_mask = 0xffffffff,
- },
-};
-
-struct platform_device msm_device_sdc3 = {
- .name = "msm_sdcc",
- .id = 3,
- .num_resources = ARRAY_SIZE(resources_sdc3),
- .resource = resources_sdc3,
- .dev = {
- .coherent_dma_mask = 0xffffffff,
- },
-};
-
-struct platform_device msm_device_sdc4 = {
- .name = "msm_sdcc",
- .id = 4,
- .num_resources = ARRAY_SIZE(resources_sdc4),
- .resource = resources_sdc4,
- .dev = {
- .coherent_dma_mask = 0xffffffff,
- },
-};
-
-static struct platform_device *msm_sdcc_devices[] __initdata = {
- &msm_device_sdc1,
- &msm_device_sdc2,
- &msm_device_sdc3,
- &msm_device_sdc4,
-};
-
-int __init msm_add_sdcc(unsigned int controller,
- struct msm_mmc_platform_data *plat,
- unsigned int stat_irq, unsigned long stat_irq_flags)
-{
- struct platform_device *pdev;
- struct resource *res;
-
- if (controller < 1 || controller > 4)
- return -EINVAL;
-
- pdev = msm_sdcc_devices[controller-1];
- pdev->dev.platform_data = plat;
-
- res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "status_irq");
- if (!res)
- return -EINVAL;
- else if (stat_irq) {
- res->start = res->end = stat_irq;
- res->flags &= ~IORESOURCE_DISABLED;
- res->flags |= stat_irq_flags;
- }
-
- return platform_device_register(pdev);
-}
-
-static struct clk_pcom_desc msm_clocks_8x50[] = {
- CLK_PCOM("adm_clk", ADM_CLK, NULL, 0),
- CLK_PCOM("ce_clk", CE_CLK, NULL, 0),
- CLK_PCOM("ebi1_clk", EBI1_CLK, NULL, CLK_MIN),
- CLK_PCOM("ebi2_clk", EBI2_CLK, NULL, 0),
- CLK_PCOM("ecodec_clk", ECODEC_CLK, NULL, 0),
- CLK_PCOM("emdh_clk", EMDH_CLK, NULL, OFF | CLK_MINMAX),
- CLK_PCOM("gp_clk", GP_CLK, NULL, 0),
- CLK_PCOM("grp_clk", GRP_3D_CLK, NULL, 0),
- CLK_PCOM("i2c_clk", I2C_CLK, NULL, 0),
- CLK_PCOM("icodec_rx_clk", ICODEC_RX_CLK, NULL, 0),
- CLK_PCOM("icodec_tx_clk", ICODEC_TX_CLK, NULL, 0),
- CLK_PCOM("imem_clk", IMEM_CLK, NULL, OFF),
- CLK_PCOM("mdc_clk", MDC_CLK, NULL, 0),
- CLK_PCOM("mddi_clk", PMDH_CLK, NULL, OFF | CLK_MINMAX),
- CLK_PCOM("mdp_clk", MDP_CLK, NULL, OFF),
- CLK_PCOM("mdp_lcdc_pclk_clk", MDP_LCDC_PCLK_CLK, NULL, 0),
- CLK_PCOM("mdp_lcdc_pad_pclk_clk", MDP_LCDC_PAD_PCLK_CLK, NULL, 0),
- CLK_PCOM("mdp_vsync_clk", MDP_VSYNC_CLK, NULL, 0),
- CLK_PCOM("pbus_clk", PBUS_CLK, NULL, CLK_MIN),
- CLK_PCOM("pcm_clk", PCM_CLK, NULL, 0),
- CLK_PCOM("sdac_clk", SDAC_CLK, NULL, OFF),
- CLK_PCOM("sdc_clk", SDC1_CLK, "msm_sdcc.1", OFF),
- CLK_PCOM("sdc_pclk", SDC1_P_CLK, "msm_sdcc.1", OFF),
- CLK_PCOM("sdc_clk", SDC2_CLK, "msm_sdcc.2", OFF),
- CLK_PCOM("sdc_pclk", SDC2_P_CLK, "msm_sdcc.2", OFF),
- CLK_PCOM("sdc_clk", SDC3_CLK, "msm_sdcc.3", OFF),
- CLK_PCOM("sdc_pclk", SDC3_P_CLK, "msm_sdcc.3", OFF),
- CLK_PCOM("sdc_clk", SDC4_CLK, "msm_sdcc.4", OFF),
- CLK_PCOM("sdc_pclk", SDC4_P_CLK, "msm_sdcc.4", OFF),
- CLK_PCOM("spi_clk", SPI_CLK, NULL, 0),
- CLK_PCOM("tsif_clk", TSIF_CLK, NULL, 0),
- CLK_PCOM("tsif_ref_clk", TSIF_REF_CLK, NULL, 0),
- CLK_PCOM("tv_dac_clk", TV_DAC_CLK, NULL, 0),
- CLK_PCOM("tv_enc_clk", TV_ENC_CLK, NULL, 0),
- CLK_PCOM("core", UART1_CLK, NULL, OFF),
- CLK_PCOM("core", UART2_CLK, NULL, 0),
- CLK_PCOM("core", UART3_CLK, "msm_serial.2", OFF),
- CLK_PCOM("uartdm_clk", UART1DM_CLK, NULL, OFF),
- CLK_PCOM("uartdm_clk", UART2DM_CLK, NULL, 0),
- CLK_PCOM("usb_hs_clk", USB_HS_CLK, NULL, OFF),
- CLK_PCOM("usb_hs_pclk", USB_HS_P_CLK, NULL, OFF),
- CLK_PCOM("usb_otg_clk", USB_OTG_CLK, NULL, 0),
- CLK_PCOM("vdc_clk", VDC_CLK, NULL, OFF | CLK_MIN),
- CLK_PCOM("vfe_clk", VFE_CLK, NULL, OFF),
- CLK_PCOM("vfe_mdc_clk", VFE_MDC_CLK, NULL, OFF),
- CLK_PCOM("vfe_axi_clk", VFE_AXI_CLK, NULL, OFF),
- CLK_PCOM("usb_hs2_clk", USB_HS2_CLK, NULL, OFF),
- CLK_PCOM("usb_hs2_pclk", USB_HS2_P_CLK, NULL, OFF),
- CLK_PCOM("usb_hs3_clk", USB_HS3_CLK, NULL, OFF),
- CLK_PCOM("usb_hs3_pclk", USB_HS3_P_CLK, NULL, OFF),
- CLK_PCOM("usb_phy_clk", USB_PHY_CLK, NULL, 0),
-};
-
-static struct pcom_clk_pdata msm_clock_8x50_pdata = {
- .lookup = msm_clocks_8x50,
- .num_lookups = ARRAY_SIZE(msm_clocks_8x50),
-};
-
-struct platform_device msm_clock_8x50 = {
- .name = "msm-clock-pcom",
- .dev.platform_data = &msm_clock_8x50_pdata,
-};
diff --git a/arch/arm/mach-msm/devices.h b/arch/arm/mach-msm/devices.h
deleted file mode 100644
index dccefad9f9b9..000000000000
--- a/arch/arm/mach-msm/devices.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* linux/arch/arm/mach-msm/devices.h
- *
- * Copyright (C) 2008 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ARCH_ARM_MACH_MSM_DEVICES_H
-#define __ARCH_ARM_MACH_MSM_DEVICES_H
-
-extern struct platform_device msm_device_gpio_7201;
-extern struct platform_device msm_device_gpio_7x30;
-extern struct platform_device msm_device_gpio_8x50;
-
-extern struct platform_device msm_device_uart1;
-extern struct platform_device msm_device_uart2;
-extern struct platform_device msm_device_uart3;
-
-extern struct platform_device msm8960_device_uart_gsbi2;
-extern struct platform_device msm8960_device_uart_gsbi5;
-
-extern struct platform_device msm_device_sdc1;
-extern struct platform_device msm_device_sdc2;
-extern struct platform_device msm_device_sdc3;
-extern struct platform_device msm_device_sdc4;
-
-extern struct platform_device msm_device_hsusb;
-extern struct platform_device msm_device_otg;
-extern struct platform_device msm_device_hsusb_host;
-
-extern struct platform_device msm_device_i2c;
-
-extern struct platform_device msm_device_smd;
-
-extern struct platform_device msm_device_nand;
-
-extern struct platform_device msm_device_mddi0;
-extern struct platform_device msm_device_mddi1;
-extern struct platform_device msm_device_mdp;
-
-extern struct platform_device msm_clock_7x01a;
-extern struct platform_device msm_clock_7x30;
-extern struct platform_device msm_clock_8x50;
-
-#endif
diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c
deleted file mode 100644
index fb9762464718..000000000000
--- a/arch/arm/mach-msm/dma.c
+++ /dev/null
@@ -1,298 +0,0 @@
-/* linux/arch/arm/mach-msm/dma.c
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/completion.h>
-#include <linux/module.h>
-#include <mach/dma.h>
-#include <mach/msm_iomap.h>
-
-#define MSM_DMOV_CHANNEL_COUNT 16
-
-#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2))
-#define DMOV_SD1(off, ch) (MSM_DMOV_BASE + 0x0400 + (off) + ((ch) << 2))
-#define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2))
-#define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2))
-
-#if defined(CONFIG_ARCH_MSM7X30)
-#define DMOV_SD_AARM DMOV_SD2
-#else
-#define DMOV_SD_AARM DMOV_SD3
-#endif
-
-#define DMOV_CMD_PTR(ch) DMOV_SD_AARM(0x000, ch)
-#define DMOV_RSLT(ch) DMOV_SD_AARM(0x040, ch)
-#define DMOV_FLUSH0(ch) DMOV_SD_AARM(0x080, ch)
-#define DMOV_FLUSH1(ch) DMOV_SD_AARM(0x0C0, ch)
-#define DMOV_FLUSH2(ch) DMOV_SD_AARM(0x100, ch)
-#define DMOV_FLUSH3(ch) DMOV_SD_AARM(0x140, ch)
-#define DMOV_FLUSH4(ch) DMOV_SD_AARM(0x180, ch)
-#define DMOV_FLUSH5(ch) DMOV_SD_AARM(0x1C0, ch)
-
-#define DMOV_STATUS(ch) DMOV_SD_AARM(0x200, ch)
-#define DMOV_ISR DMOV_SD_AARM(0x380, 0)
-
-#define DMOV_CONFIG(ch) DMOV_SD_AARM(0x300, ch)
-
-enum {
- MSM_DMOV_PRINT_ERRORS = 1,
- MSM_DMOV_PRINT_IO = 2,
- MSM_DMOV_PRINT_FLOW = 4
-};
-
-static DEFINE_SPINLOCK(msm_dmov_lock);
-static struct clk *msm_dmov_clk;
-static unsigned int channel_active;
-static struct list_head ready_commands[MSM_DMOV_CHANNEL_COUNT];
-static struct list_head active_commands[MSM_DMOV_CHANNEL_COUNT];
-unsigned int msm_dmov_print_mask = MSM_DMOV_PRINT_ERRORS;
-
-#define MSM_DMOV_DPRINTF(mask, format, args...) \
- do { \
- if ((mask) & msm_dmov_print_mask) \
- printk(KERN_ERR format, args); \
- } while (0)
-#define PRINT_ERROR(format, args...) \
- MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_ERRORS, format, args);
-#define PRINT_IO(format, args...) \
- MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_IO, format, args);
-#define PRINT_FLOW(format, args...) \
- MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_FLOW, format, args);
-
-void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful)
-{
- writel((graceful << 31), DMOV_FLUSH0(id));
-}
-EXPORT_SYMBOL_GPL(msm_dmov_stop_cmd);
-
-void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd)
-{
- unsigned long irq_flags;
- unsigned int status;
-
- spin_lock_irqsave(&msm_dmov_lock, irq_flags);
- if (!channel_active)
- clk_enable(msm_dmov_clk);
- dsb();
- status = readl(DMOV_STATUS(id));
- if (list_empty(&ready_commands[id]) &&
- (status & DMOV_STATUS_CMD_PTR_RDY)) {
-#if 0
- if (list_empty(&active_commands[id])) {
- PRINT_FLOW("msm_dmov_enqueue_cmd(%d), enable interrupt\n", id);
- writel(DMOV_CONFIG_IRQ_EN, DMOV_CONFIG(id));
- }
-#endif
- if (cmd->execute_func)
- cmd->execute_func(cmd);
- PRINT_IO("msm_dmov_enqueue_cmd(%d), start command, status %x\n", id, status);
- list_add_tail(&cmd->list, &active_commands[id]);
- if (!channel_active)
- enable_irq(INT_ADM_AARM);
- channel_active |= 1U << id;
- writel(cmd->cmdptr, DMOV_CMD_PTR(id));
- } else {
- if (!channel_active)
- clk_disable(msm_dmov_clk);
- if (list_empty(&active_commands[id]))
- PRINT_ERROR("msm_dmov_enqueue_cmd(%d), error datamover stalled, status %x\n", id, status);
-
- PRINT_IO("msm_dmov_enqueue_cmd(%d), enqueue command, status %x\n", id, status);
- list_add_tail(&cmd->list, &ready_commands[id]);
- }
- spin_unlock_irqrestore(&msm_dmov_lock, irq_flags);
-}
-EXPORT_SYMBOL_GPL(msm_dmov_enqueue_cmd);
-
-struct msm_dmov_exec_cmdptr_cmd {
- struct msm_dmov_cmd dmov_cmd;
- struct completion complete;
- unsigned id;
- unsigned int result;
- struct msm_dmov_errdata err;
-};
-
-static void
-dmov_exec_cmdptr_complete_func(struct msm_dmov_cmd *_cmd,
- unsigned int result,
- struct msm_dmov_errdata *err)
-{
- struct msm_dmov_exec_cmdptr_cmd *cmd = container_of(_cmd, struct msm_dmov_exec_cmdptr_cmd, dmov_cmd);
- cmd->result = result;
- if (result != 0x80000002 && err)
- memcpy(&cmd->err, err, sizeof(struct msm_dmov_errdata));
-
- complete(&cmd->complete);
-}
-
-int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr)
-{
- struct msm_dmov_exec_cmdptr_cmd cmd;
-
- PRINT_FLOW("dmov_exec_cmdptr(%d, %x)\n", id, cmdptr);
-
- cmd.dmov_cmd.cmdptr = cmdptr;
- cmd.dmov_cmd.complete_func = dmov_exec_cmdptr_complete_func;
- cmd.dmov_cmd.execute_func = NULL;
- cmd.id = id;
- init_completion(&cmd.complete);
-
- msm_dmov_enqueue_cmd(id, &cmd.dmov_cmd);
- wait_for_completion(&cmd.complete);
-
- if (cmd.result != 0x80000002) {
- PRINT_ERROR("dmov_exec_cmdptr(%d): ERROR, result: %x\n", id, cmd.result);
- PRINT_ERROR("dmov_exec_cmdptr(%d): flush: %x %x %x %x\n",
- id, cmd.err.flush[0], cmd.err.flush[1], cmd.err.flush[2], cmd.err.flush[3]);
- return -EIO;
- }
- PRINT_FLOW("dmov_exec_cmdptr(%d, %x) done\n", id, cmdptr);
- return 0;
-}
-
-
-static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id)
-{
- unsigned int int_status, mask, id;
- unsigned long irq_flags;
- unsigned int ch_status;
- unsigned int ch_result;
- struct msm_dmov_cmd *cmd;
-
- spin_lock_irqsave(&msm_dmov_lock, irq_flags);
-
- int_status = readl(DMOV_ISR); /* read and clear interrupt */
- PRINT_FLOW("msm_datamover_irq_handler: DMOV_ISR %x\n", int_status);
-
- while (int_status) {
- mask = int_status & -int_status;
- id = fls(mask) - 1;
- PRINT_FLOW("msm_datamover_irq_handler %08x %08x id %d\n", int_status, mask, id);
- int_status &= ~mask;
- ch_status = readl(DMOV_STATUS(id));
- if (!(ch_status & DMOV_STATUS_RSLT_VALID)) {
- PRINT_FLOW("msm_datamover_irq_handler id %d, result not valid %x\n", id, ch_status);
- continue;
- }
- do {
- ch_result = readl(DMOV_RSLT(id));
- if (list_empty(&active_commands[id])) {
- PRINT_ERROR("msm_datamover_irq_handler id %d, got result "
- "with no active command, status %x, result %x\n",
- id, ch_status, ch_result);
- cmd = NULL;
- } else
- cmd = list_entry(active_commands[id].next, typeof(*cmd), list);
- PRINT_FLOW("msm_datamover_irq_handler id %d, status %x, result %x\n", id, ch_status, ch_result);
- if (ch_result & DMOV_RSLT_DONE) {
- PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n",
- id, ch_status);
- PRINT_IO("msm_datamover_irq_handler id %d, got result "
- "for %p, result %x\n", id, cmd, ch_result);
- if (cmd) {
- list_del(&cmd->list);
- dsb();
- cmd->complete_func(cmd, ch_result, NULL);
- }
- }
- if (ch_result & DMOV_RSLT_FLUSH) {
- struct msm_dmov_errdata errdata;
-
- errdata.flush[0] = readl(DMOV_FLUSH0(id));
- errdata.flush[1] = readl(DMOV_FLUSH1(id));
- errdata.flush[2] = readl(DMOV_FLUSH2(id));
- errdata.flush[3] = readl(DMOV_FLUSH3(id));
- errdata.flush[4] = readl(DMOV_FLUSH4(id));
- errdata.flush[5] = readl(DMOV_FLUSH5(id));
- PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
- PRINT_FLOW("msm_datamover_irq_handler id %d, flush, result %x, flush0 %x\n", id, ch_result, errdata.flush[0]);
- if (cmd) {
- list_del(&cmd->list);
- dsb();
- cmd->complete_func(cmd, ch_result, &errdata);
- }
- }
- if (ch_result & DMOV_RSLT_ERROR) {
- struct msm_dmov_errdata errdata;
-
- errdata.flush[0] = readl(DMOV_FLUSH0(id));
- errdata.flush[1] = readl(DMOV_FLUSH1(id));
- errdata.flush[2] = readl(DMOV_FLUSH2(id));
- errdata.flush[3] = readl(DMOV_FLUSH3(id));
- errdata.flush[4] = readl(DMOV_FLUSH4(id));
- errdata.flush[5] = readl(DMOV_FLUSH5(id));
-
- PRINT_ERROR("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
- PRINT_ERROR("msm_datamover_irq_handler id %d, error, result %x, flush0 %x\n", id, ch_result, errdata.flush[0]);
- if (cmd) {
- list_del(&cmd->list);
- dsb();
- cmd->complete_func(cmd, ch_result, &errdata);
- }
- /* this does not seem to work, once we get an error */
- /* the datamover will no longer accept commands */
- writel(0, DMOV_FLUSH0(id));
- }
- ch_status = readl(DMOV_STATUS(id));
- PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
- if ((ch_status & DMOV_STATUS_CMD_PTR_RDY) && !list_empty(&ready_commands[id])) {
- cmd = list_entry(ready_commands[id].next, typeof(*cmd), list);
- list_move_tail(&cmd->list, &active_commands[id]);
- if (cmd->execute_func)
- cmd->execute_func(cmd);
- PRINT_FLOW("msm_datamover_irq_handler id %d, start command\n", id);
- writel(cmd->cmdptr, DMOV_CMD_PTR(id));
- }
- } while (ch_status & DMOV_STATUS_RSLT_VALID);
- if (list_empty(&active_commands[id]) && list_empty(&ready_commands[id]))
- channel_active &= ~(1U << id);
- PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
- }
-
- if (!channel_active) {
- disable_irq_nosync(INT_ADM_AARM);
- clk_disable(msm_dmov_clk);
- }
-
- spin_unlock_irqrestore(&msm_dmov_lock, irq_flags);
- return IRQ_HANDLED;
-}
-
-static int __init msm_init_datamover(void)
-{
- int i;
- int ret;
- struct clk *clk;
-
- for (i = 0; i < MSM_DMOV_CHANNEL_COUNT; i++) {
- INIT_LIST_HEAD(&ready_commands[i]);
- INIT_LIST_HEAD(&active_commands[i]);
- writel(DMOV_CONFIG_IRQ_EN | DMOV_CONFIG_FORCE_TOP_PTR_RSLT | DMOV_CONFIG_FORCE_FLUSH_RSLT, DMOV_CONFIG(i));
- }
- clk = clk_get(NULL, "adm_clk");
- if (IS_ERR(clk))
- return PTR_ERR(clk);
- clk_prepare(clk);
- msm_dmov_clk = clk;
- ret = request_irq(INT_ADM_AARM, msm_datamover_irq_handler, 0, "msmdatamover", NULL);
- if (ret)
- return ret;
- disable_irq(INT_ADM_AARM);
- return 0;
-}
-module_init(msm_init_datamover);
diff --git a/arch/arm/mach-msm/gpiomux-8x50.c b/arch/arm/mach-msm/gpiomux-8x50.c
deleted file mode 100644
index f7a4ea593c95..000000000000
--- a/arch/arm/mach-msm/gpiomux-8x50.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#include "gpiomux.h"
-
-#if defined(CONFIG_MMC_MSM) || defined(CONFIG_MMC_MSM_MODULE)
- #define SDCC_DAT_0_3_CMD_ACTV_CFG (GPIOMUX_VALID | GPIOMUX_PULL_UP\
- | GPIOMUX_FUNC_1 | GPIOMUX_DRV_8MA)
- #define SDCC_CLK_ACTV_CFG (GPIOMUX_VALID | GPIOMUX_PULL_NONE\
- | GPIOMUX_FUNC_1 | GPIOMUX_DRV_8MA)
-#else
- #define SDCC_DAT_0_3_CMD_ACTV_CFG 0
- #define SDCC_CLK_ACTV_CFG 0
-#endif
-
-#define SDC1_SUSPEND_CONFIG (GPIOMUX_VALID | GPIOMUX_PULL_DOWN\
- | GPIOMUX_FUNC_GPIO | GPIOMUX_DRV_2MA)
-
-struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
- [86] = { /* UART3 RX */
- .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
- GPIOMUX_FUNC_1 | GPIOMUX_VALID,
- },
- [87] = { /* UART3 TX */
- .suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
- GPIOMUX_FUNC_1 | GPIOMUX_VALID,
- },
- /* SDC1 data[3:0] & CMD */
- [51 ... 55] = {
- .active = SDCC_DAT_0_3_CMD_ACTV_CFG,
- .suspended = SDC1_SUSPEND_CONFIG
- },
- /* SDC1 CLK */
- [56] = {
- .active = SDCC_CLK_ACTV_CFG,
- .suspended = SDC1_SUSPEND_CONFIG
- },
-};
diff --git a/arch/arm/mach-msm/gpiomux-v1.h b/arch/arm/mach-msm/gpiomux-v1.h
deleted file mode 100644
index 71d86feba450..000000000000
--- a/arch/arm/mach-msm/gpiomux-v1.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#ifndef __ARCH_ARM_MACH_MSM_GPIOMUX_V1_H
-#define __ARCH_ARM_MACH_MSM_GPIOMUX_V1_H
-
-#if defined(CONFIG_ARCH_MSM7X30)
-#define GPIOMUX_NGPIOS 182
-#elif defined(CONFIG_ARCH_QSD8X50)
-#define GPIOMUX_NGPIOS 165
-#else
-#define GPIOMUX_NGPIOS 133
-#endif
-
-typedef u32 gpiomux_config_t;
-
-enum {
- GPIOMUX_DRV_2MA = 0UL << 17,
- GPIOMUX_DRV_4MA = 1UL << 17,
- GPIOMUX_DRV_6MA = 2UL << 17,
- GPIOMUX_DRV_8MA = 3UL << 17,
- GPIOMUX_DRV_10MA = 4UL << 17,
- GPIOMUX_DRV_12MA = 5UL << 17,
- GPIOMUX_DRV_14MA = 6UL << 17,
- GPIOMUX_DRV_16MA = 7UL << 17,
-};
-
-enum {
- GPIOMUX_FUNC_GPIO = 0UL,
- GPIOMUX_FUNC_1 = 1UL,
- GPIOMUX_FUNC_2 = 2UL,
- GPIOMUX_FUNC_3 = 3UL,
- GPIOMUX_FUNC_4 = 4UL,
- GPIOMUX_FUNC_5 = 5UL,
- GPIOMUX_FUNC_6 = 6UL,
- GPIOMUX_FUNC_7 = 7UL,
- GPIOMUX_FUNC_8 = 8UL,
- GPIOMUX_FUNC_9 = 9UL,
- GPIOMUX_FUNC_A = 10UL,
- GPIOMUX_FUNC_B = 11UL,
- GPIOMUX_FUNC_C = 12UL,
- GPIOMUX_FUNC_D = 13UL,
- GPIOMUX_FUNC_E = 14UL,
- GPIOMUX_FUNC_F = 15UL,
-};
-
-enum {
- GPIOMUX_PULL_NONE = 0UL << 15,
- GPIOMUX_PULL_DOWN = 1UL << 15,
- GPIOMUX_PULL_KEEPER = 2UL << 15,
- GPIOMUX_PULL_UP = 3UL << 15,
-};
-
-#endif
diff --git a/arch/arm/mach-msm/gpiomux.c b/arch/arm/mach-msm/gpiomux.c
deleted file mode 100644
index 2b8e2d217082..000000000000
--- a/arch/arm/mach-msm/gpiomux.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include "gpiomux.h"
-#include "proc_comm.h"
-
-static DEFINE_SPINLOCK(gpiomux_lock);
-
-static void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val)
-{
- unsigned tlmm_config = (val & ~GPIOMUX_CTL_MASK) |
- ((gpio & 0x3ff) << 4);
- unsigned tlmm_disable = 0;
- int rc;
-
- rc = msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX,
- &tlmm_config, &tlmm_disable);
- if (rc)
- pr_err("%s: unexpected proc_comm failure %d: %08x %08x\n",
- __func__, rc, tlmm_config, tlmm_disable);
-}
-
-int msm_gpiomux_write(unsigned gpio,
- gpiomux_config_t active,
- gpiomux_config_t suspended)
-{
- struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio;
- unsigned long irq_flags;
- gpiomux_config_t setting;
-
- if (gpio >= GPIOMUX_NGPIOS)
- return -EINVAL;
-
- spin_lock_irqsave(&gpiomux_lock, irq_flags);
-
- if (active & GPIOMUX_VALID)
- cfg->active = active;
-
- if (suspended & GPIOMUX_VALID)
- cfg->suspended = suspended;
-
- setting = cfg->ref ? active : suspended;
- if (setting & GPIOMUX_VALID)
- __msm_gpiomux_write(gpio, setting);
-
- spin_unlock_irqrestore(&gpiomux_lock, irq_flags);
- return 0;
-}
-EXPORT_SYMBOL(msm_gpiomux_write);
-
-int msm_gpiomux_get(unsigned gpio)
-{
- struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio;
- unsigned long irq_flags;
-
- if (gpio >= GPIOMUX_NGPIOS)
- return -EINVAL;
-
- spin_lock_irqsave(&gpiomux_lock, irq_flags);
- if (cfg->ref++ == 0 && cfg->active & GPIOMUX_VALID)
- __msm_gpiomux_write(gpio, cfg->active);
- spin_unlock_irqrestore(&gpiomux_lock, irq_flags);
- return 0;
-}
-EXPORT_SYMBOL(msm_gpiomux_get);
-
-int msm_gpiomux_put(unsigned gpio)
-{
- struct msm_gpiomux_config *cfg = msm_gpiomux_configs + gpio;
- unsigned long irq_flags;
-
- if (gpio >= GPIOMUX_NGPIOS)
- return -EINVAL;
-
- spin_lock_irqsave(&gpiomux_lock, irq_flags);
- BUG_ON(cfg->ref == 0);
- if (--cfg->ref == 0 && cfg->suspended & GPIOMUX_VALID)
- __msm_gpiomux_write(gpio, cfg->suspended);
- spin_unlock_irqrestore(&gpiomux_lock, irq_flags);
- return 0;
-}
-EXPORT_SYMBOL(msm_gpiomux_put);
-
-static int __init gpiomux_init(void)
-{
- unsigned n;
-
- for (n = 0; n < GPIOMUX_NGPIOS; ++n) {
- msm_gpiomux_configs[n].ref = 0;
- if (!(msm_gpiomux_configs[n].suspended & GPIOMUX_VALID))
- continue;
- __msm_gpiomux_write(n, msm_gpiomux_configs[n].suspended);
- }
- return 0;
-}
-postcore_initcall(gpiomux_init);
diff --git a/arch/arm/mach-msm/gpiomux.h b/arch/arm/mach-msm/gpiomux.h
deleted file mode 100644
index 4410d7766f93..000000000000
--- a/arch/arm/mach-msm/gpiomux.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#ifndef __ARCH_ARM_MACH_MSM_GPIOMUX_H
-#define __ARCH_ARM_MACH_MSM_GPIOMUX_H
-
-#include <linux/bitops.h>
-#include <linux/errno.h>
-#include <mach/msm_gpiomux.h>
-#include "gpiomux-v1.h"
-
-/**
- * struct msm_gpiomux_config: gpiomux settings for one gpio line.
- *
- * A complete gpiomux config is the bitwise-or of a drive-strength,
- * function, and pull. For functions other than GPIO, the OE
- * is hard-wired according to the function. For GPIO mode,
- * OE is controlled by gpiolib.
- *
- * Available settings differ by target; see the gpiomux header
- * specific to your target arch for available configurations.
- *
- * @active: The configuration to be installed when the line is
- * active, or its reference count is > 0.
- * @suspended: The configuration to be installed when the line
- * is suspended, or its reference count is 0.
- * @ref: The reference count of the line. For internal use of
- * the gpiomux framework only.
- */
-struct msm_gpiomux_config {
- gpiomux_config_t active;
- gpiomux_config_t suspended;
- unsigned ref;
-};
-
-/**
- * @GPIOMUX_VALID: If set, the config field contains 'good data'.
- * The absence of this bit will prevent the gpiomux
- * system from applying the configuration under all
- * circumstances.
- */
-enum {
- GPIOMUX_VALID = BIT(sizeof(gpiomux_config_t) * BITS_PER_BYTE - 1),
- GPIOMUX_CTL_MASK = GPIOMUX_VALID,
-};
-
-#ifdef CONFIG_MSM_GPIOMUX
-
-/* Each architecture must provide its own instance of this table.
- * To avoid having gpiomux manage any given gpio, one or both of
- * the entries can avoid setting GPIOMUX_VALID - the absence
- * of that flag will prevent the configuration from being applied
- * during state transitions.
- */
-extern struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS];
-
-/* Install a new configuration to the gpio line. To avoid overwriting
- * a configuration, leave the VALID bit out.
- */
-int msm_gpiomux_write(unsigned gpio,
- gpiomux_config_t active,
- gpiomux_config_t suspended);
-#else
-static inline int msm_gpiomux_write(unsigned gpio,
- gpiomux_config_t active,
- gpiomux_config_t suspended)
-{
- return -ENOSYS;
-}
-#endif
-#endif
diff --git a/arch/arm/mach-msm/include/mach/clk.h b/arch/arm/mach-msm/include/mach/clk.h
deleted file mode 100644
index fd4f4a7a83b3..000000000000
--- a/arch/arm/mach-msm/include/mach/clk.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef __MACH_CLK_H
-#define __MACH_CLK_H
-
-/* Magic rate value for use with PM QOS to request the board's maximum
- * supported AXI rate. PM QOS will only pass positive s32 rate values
- * through to the clock driver, so INT_MAX is used.
- */
-#define MSM_AXI_MAX_FREQ LONG_MAX
-
-enum clk_reset_action {
- CLK_RESET_DEASSERT = 0,
- CLK_RESET_ASSERT = 1
-};
-
-struct clk;
-
-/* Assert/Deassert reset to a hardware block associated with a clock */
-int clk_reset(struct clk *clk, enum clk_reset_action action);
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/dma.h b/arch/arm/mach-msm/include/mach/dma.h
deleted file mode 100644
index a72d48d42342..000000000000
--- a/arch/arm/mach-msm/include/mach/dma.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/* linux/include/asm-arm/arch-msm/dma.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_DMA_H
-
-#include <linux/list.h>
-
-struct msm_dmov_errdata {
- uint32_t flush[6];
-};
-
-struct msm_dmov_cmd {
- struct list_head list;
- unsigned int cmdptr;
- void (*complete_func)(struct msm_dmov_cmd *cmd,
- unsigned int result,
- struct msm_dmov_errdata *err);
- void (*execute_func)(struct msm_dmov_cmd *cmd);
- void *data;
-};
-
-#ifndef CONFIG_ARCH_MSM8X60
-void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd);
-void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful);
-int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr);
-#else
-static inline
-void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd) { }
-static inline
-void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful) { }
-static inline
-int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr) { return -EIO; }
-#endif
-
-#define DMOV_CMD_LIST (0 << 29) /* does not work */
-#define DMOV_CMD_PTR_LIST (1 << 29) /* works */
-#define DMOV_CMD_INPUT_CFG (2 << 29) /* untested */
-#define DMOV_CMD_OUTPUT_CFG (3 << 29) /* untested */
-#define DMOV_CMD_ADDR(addr) ((addr) >> 3)
-
-#define DMOV_RSLT_VALID (1 << 31) /* 0 == host has empties result fifo */
-#define DMOV_RSLT_ERROR (1 << 3)
-#define DMOV_RSLT_FLUSH (1 << 2)
-#define DMOV_RSLT_DONE (1 << 1) /* top pointer done */
-#define DMOV_RSLT_USER (1 << 0) /* command with FR force result */
-
-#define DMOV_STATUS_RSLT_COUNT(n) (((n) >> 29))
-#define DMOV_STATUS_CMD_COUNT(n) (((n) >> 27) & 3)
-#define DMOV_STATUS_RSLT_VALID (1 << 1)
-#define DMOV_STATUS_CMD_PTR_RDY (1 << 0)
-
-#define DMOV_CONFIG_FORCE_TOP_PTR_RSLT (1 << 2)
-#define DMOV_CONFIG_FORCE_FLUSH_RSLT (1 << 1)
-#define DMOV_CONFIG_IRQ_EN (1 << 0)
-
-/* channel assignments */
-
-#define DMOV_NAND_CHAN 7
-#define DMOV_NAND_CRCI_CMD 5
-#define DMOV_NAND_CRCI_DATA 4
-
-#define DMOV_SDC1_CHAN 8
-#define DMOV_SDC1_CRCI 6
-
-#define DMOV_SDC2_CHAN 8
-#define DMOV_SDC2_CRCI 7
-
-#define DMOV_TSIF_CHAN 10
-#define DMOV_TSIF_CRCI 10
-
-#define DMOV_USB_CHAN 11
-
-/* no client rate control ifc (eg, ram) */
-#define DMOV_NONE_CRCI 0
-
-
-/* If the CMD_PTR register has CMD_PTR_LIST selected, the data mover
- * is going to walk a list of 32bit pointers as described below. Each
- * pointer points to a *array* of dmov_s, etc structs. The last pointer
- * in the list is marked with CMD_PTR_LP. The last struct in each array
- * is marked with CMD_LC (see below).
- */
-#define CMD_PTR_ADDR(addr) ((addr) >> 3)
-#define CMD_PTR_LP (1 << 31) /* last pointer */
-#define CMD_PTR_PT (3 << 29) /* ? */
-
-/* Single Item Mode */
-typedef struct {
- unsigned cmd;
- unsigned src;
- unsigned dst;
- unsigned len;
-} dmov_s;
-
-/* Scatter/Gather Mode */
-typedef struct {
- unsigned cmd;
- unsigned src_dscr;
- unsigned dst_dscr;
- unsigned _reserved;
-} dmov_sg;
-
-/* Box mode */
-typedef struct {
- uint32_t cmd;
- uint32_t src_row_addr;
- uint32_t dst_row_addr;
- uint32_t src_dst_len;
- uint32_t num_rows;
- uint32_t row_offset;
-} dmov_box;
-
-/* bits for the cmd field of the above structures */
-
-#define CMD_LC (1 << 31) /* last command */
-#define CMD_FR (1 << 22) /* force result -- does not work? */
-#define CMD_OCU (1 << 21) /* other channel unblock */
-#define CMD_OCB (1 << 20) /* other channel block */
-#define CMD_TCB (1 << 19) /* ? */
-#define CMD_DAH (1 << 18) /* destination address hold -- does not work?*/
-#define CMD_SAH (1 << 17) /* source address hold -- does not work? */
-
-#define CMD_MODE_SINGLE (0 << 0) /* dmov_s structure used */
-#define CMD_MODE_SG (1 << 0) /* untested */
-#define CMD_MODE_IND_SG (2 << 0) /* untested */
-#define CMD_MODE_BOX (3 << 0) /* untested */
-
-#define CMD_DST_SWAP_BYTES (1 << 14) /* exchange each byte n with byte n+1 */
-#define CMD_DST_SWAP_SHORTS (1 << 15) /* exchange each short n with short n+1 */
-#define CMD_DST_SWAP_WORDS (1 << 16) /* exchange each word n with word n+1 */
-
-#define CMD_SRC_SWAP_BYTES (1 << 11) /* exchange each byte n with byte n+1 */
-#define CMD_SRC_SWAP_SHORTS (1 << 12) /* exchange each short n with short n+1 */
-#define CMD_SRC_SWAP_WORDS (1 << 13) /* exchange each word n with word n+1 */
-
-#define CMD_DST_CRCI(n) (((n) & 15) << 7)
-#define CMD_SRC_CRCI(n) (((n) & 15) << 3)
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/entry-macro.S b/arch/arm/mach-msm/include/mach/entry-macro.S
deleted file mode 100644
index f2ae9087f654..000000000000
--- a/arch/arm/mach-msm/include/mach/entry-macro.S
+++ /dev/null
@@ -1,36 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- */
-
-#if !defined(CONFIG_ARM_GIC)
-#include <mach/msm_iomap.h>
-
- .macro get_irqnr_preamble, base, tmp
- @ enable imprecise aborts
- cpsie a
- mov \base, #MSM_VIC_BASE
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- @ 0xD0 has irq# or old irq# if the irq has been handled
- @ 0xD4 has irq# or -1 if none pending *but* if you just
- @ read 0xD4 you never get the first irq for some reason
- ldr \irqnr, [\base, #0xD0]
- ldr \irqnr, [\base, #0xD4]
- cmp \irqnr, #0xffffffff
- .endm
-#endif
diff --git a/arch/arm/mach-msm/include/mach/hardware.h b/arch/arm/mach-msm/include/mach/hardware.h
deleted file mode 100644
index 2d126091ae41..000000000000
--- a/arch/arm/mach-msm/include/mach/hardware.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/mach-msm/include/mach/hardware.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_HARDWARE_H
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/irqs-7x00.h b/arch/arm/mach-msm/include/mach/irqs-7x00.h
deleted file mode 100644
index f1fe70612fe9..000000000000
--- a/arch/arm/mach-msm/include/mach/irqs-7x00.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2009, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- */
-
-#ifndef __ASM_ARCH_MSM_IRQS_7X00_H
-#define __ASM_ARCH_MSM_IRQS_7X00_H
-
-/* MSM ARM11 Interrupt Numbers */
-/* See 80-VE113-1 A, pp219-221 */
-
-#define INT_A9_M2A_0 0
-#define INT_A9_M2A_1 1
-#define INT_A9_M2A_2 2
-#define INT_A9_M2A_3 3
-#define INT_A9_M2A_4 4
-#define INT_A9_M2A_5 5
-#define INT_A9_M2A_6 6
-#define INT_GP_TIMER_EXP 7
-#define INT_DEBUG_TIMER_EXP 8
-#define INT_UART1 9
-#define INT_UART2 10
-#define INT_UART3 11
-#define INT_UART1_RX 12
-#define INT_UART2_RX 13
-#define INT_UART3_RX 14
-#define INT_USB_OTG 15
-#define INT_MDDI_PRI 16
-#define INT_MDDI_EXT 17
-#define INT_MDDI_CLIENT 18
-#define INT_MDP 19
-#define INT_GRAPHICS 20
-#define INT_ADM_AARM 21
-#define INT_ADSP_A11 22
-#define INT_ADSP_A9_A11 23
-#define INT_SDC1_0 24
-#define INT_SDC1_1 25
-#define INT_SDC2_0 26
-#define INT_SDC2_1 27
-#define INT_KEYSENSE 28
-#define INT_TCHSCRN_SSBI 29
-#define INT_TCHSCRN1 30
-#define INT_TCHSCRN2 31
-
-#define INT_GPIO_GROUP1 (32 + 0)
-#define INT_GPIO_GROUP2 (32 + 1)
-#define INT_PWB_I2C (32 + 2)
-#define INT_SOFTRESET (32 + 3)
-#define INT_NAND_WR_ER_DONE (32 + 4)
-#define INT_NAND_OP_DONE (32 + 5)
-#define INT_PBUS_ARM11 (32 + 6)
-#define INT_AXI_MPU_SMI (32 + 7)
-#define INT_AXI_MPU_EBI1 (32 + 8)
-#define INT_AD_HSSD (32 + 9)
-#define INT_ARM11_PMU (32 + 10)
-#define INT_ARM11_DMA (32 + 11)
-#define INT_TSIF_IRQ (32 + 12)
-#define INT_UART1DM_IRQ (32 + 13)
-#define INT_UART1DM_RX (32 + 14)
-#define INT_USB_HS (32 + 15)
-#define INT_SDC3_0 (32 + 16)
-#define INT_SDC3_1 (32 + 17)
-#define INT_SDC4_0 (32 + 18)
-#define INT_SDC4_1 (32 + 19)
-#define INT_UART2DM_RX (32 + 20)
-#define INT_UART2DM_IRQ (32 + 21)
-
-/* 22-31 are reserved */
-
-#define NR_MSM_IRQS 64
-#define NR_GPIO_IRQS 122
-#define NR_BOARD_IRQS 64
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/irqs-7x30.h b/arch/arm/mach-msm/include/mach/irqs-7x30.h
deleted file mode 100644
index 1f15902655fd..000000000000
--- a/arch/arm/mach-msm/include/mach/irqs-7x30.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MSM_IRQS_7X30_H
-#define __ASM_ARCH_MSM_IRQS_7X30_H
-
-/* MSM ACPU Interrupt Numbers */
-
-#define INT_DEBUG_TIMER_EXP 0
-#define INT_GPT0_TIMER_EXP 1
-#define INT_GPT1_TIMER_EXP 2
-#define INT_WDT0_ACCSCSSBARK 3
-#define INT_WDT1_ACCSCSSBARK 4
-#define INT_AVS_SVIC 5
-#define INT_AVS_SVIC_SW_DONE 6
-#define INT_SC_DBG_RX_FULL 7
-#define INT_SC_DBG_TX_EMPTY 8
-#define INT_ARM11_PM 9
-#define INT_AVS_REQ_DOWN 10
-#define INT_AVS_REQ_UP 11
-#define INT_SC_ACG 12
-/* SCSS_VICFIQSTS0[13:15] are RESERVED */
-#define INT_L2_SVICCPUIRPTREQ 16
-#define INT_L2_SVICDMANSIRPTREQ 17
-#define INT_L2_SVICDMASIRPTREQ 18
-#define INT_L2_SVICSLVIRPTREQ 19
-#define INT_AD5A_MPROC_APPS_0 20
-#define INT_AD5A_MPROC_APPS_1 21
-#define INT_A9_M2A_0 22
-#define INT_A9_M2A_1 23
-#define INT_A9_M2A_2 24
-#define INT_A9_M2A_3 25
-#define INT_A9_M2A_4 26
-#define INT_A9_M2A_5 27
-#define INT_A9_M2A_6 28
-#define INT_A9_M2A_7 29
-#define INT_A9_M2A_8 30
-#define INT_A9_M2A_9 31
-
-#define INT_AXI_EBI1_SC (32 + 0)
-#define INT_IMEM_ERR (32 + 1)
-#define INT_AXI_EBI0_SC (32 + 2)
-#define INT_PBUS_SC_IRQC (32 + 3)
-#define INT_PERPH_BUS_BPM (32 + 4)
-#define INT_CC_TEMP_SENSE (32 + 5)
-#define INT_UXMC_EBI0 (32 + 6)
-#define INT_UXMC_EBI1 (32 + 7)
-#define INT_EBI2_OP_DONE (32 + 8)
-#define INT_EBI2_WR_ER_DONE (32 + 9)
-#define INT_TCSR_SPSS_CE (32 + 10)
-#define INT_EMDH (32 + 11)
-#define INT_PMDH (32 + 12)
-#define INT_MDC (32 + 13)
-#define INT_MIDI_TO_SUPSS (32 + 14)
-#define INT_LPA_2 (32 + 15)
-#define INT_GPIO_GROUP1_SECURE (32 + 16)
-#define INT_GPIO_GROUP2_SECURE (32 + 17)
-#define INT_GPIO_GROUP1 (32 + 18)
-#define INT_GPIO_GROUP2 (32 + 19)
-#define INT_MPRPH_SOFTRESET (32 + 20)
-#define INT_PWB_I2C (32 + 21)
-#define INT_PWB_I2C_2 (32 + 22)
-#define INT_TSSC_SAMPLE (32 + 23)
-#define INT_TSSC_PENUP (32 + 24)
-#define INT_TCHSCRN_SSBI (32 + 25)
-#define INT_FM_RDS (32 + 26)
-#define INT_KEYSENSE (32 + 27)
-#define INT_USB_OTG_HS (32 + 28)
-#define INT_USB_OTG_HS2 (32 + 29)
-#define INT_USB_OTG_HS3 (32 + 30)
-#define INT_CSI (32 + 31)
-
-#define INT_SPI_OUTPUT (64 + 0)
-#define INT_SPI_INPUT (64 + 1)
-#define INT_SPI_ERROR (64 + 2)
-#define INT_UART1 (64 + 3)
-#define INT_UART1_RX (64 + 4)
-#define INT_UART2 (64 + 5)
-#define INT_UART2_RX (64 + 6)
-#define INT_UART3 (64 + 7)
-#define INT_UART3_RX (64 + 8)
-#define INT_UART1DM_IRQ (64 + 9)
-#define INT_UART1DM_RX (64 + 10)
-#define INT_UART2DM_IRQ (64 + 11)
-#define INT_UART2DM_RX (64 + 12)
-#define INT_TSIF (64 + 13)
-#define INT_ADM_SC1 (64 + 14)
-#define INT_ADM_SC2 (64 + 15)
-#define INT_MDP (64 + 16)
-#define INT_VPE (64 + 17)
-#define INT_GRP_2D (64 + 18)
-#define INT_GRP_3D (64 + 19)
-#define INT_ROTATOR (64 + 20)
-#define INT_MFC720 (64 + 21)
-#define INT_JPEG (64 + 22)
-#define INT_VFE (64 + 23)
-#define INT_TV_ENC (64 + 24)
-#define INT_PMIC_SSBI (64 + 25)
-#define INT_MPM_1 (64 + 26)
-#define INT_TCSR_SPSS_SAMPLE (64 + 27)
-#define INT_TCSR_SPSS_PENUP (64 + 28)
-#define INT_MPM_2 (64 + 29)
-#define INT_SDC1_0 (64 + 30)
-#define INT_SDC1_1 (64 + 31)
-
-#define INT_SDC3_0 (96 + 0)
-#define INT_SDC3_1 (96 + 1)
-#define INT_SDC2_0 (96 + 2)
-#define INT_SDC2_1 (96 + 3)
-#define INT_SDC4_0 (96 + 4)
-#define INT_SDC4_1 (96 + 5)
-#define INT_PWB_QUP_IN (96 + 6)
-#define INT_PWB_QUP_OUT (96 + 7)
-#define INT_PWB_QUP_ERR (96 + 8)
-#define INT_SCSS_WDT0_BITE (96 + 9)
-/* SCSS_VICFIQSTS3[10:31] are RESERVED */
-
-/* Retrofit universal macro names */
-#define INT_ADM_AARM INT_ADM_SC2
-#define INT_USB_HS INT_USB_OTG_HS
-#define INT_USB_OTG INT_USB_OTG_HS
-#define INT_TCHSCRN1 INT_TSSC_SAMPLE
-#define INT_TCHSCRN2 INT_TSSC_PENUP
-#define INT_GP_TIMER_EXP INT_GPT0_TIMER_EXP
-#define INT_ADSP_A11 INT_AD5A_MPROC_APPS_0
-#define INT_ADSP_A9_A11 INT_AD5A_MPROC_APPS_1
-#define INT_MDDI_EXT INT_EMDH
-#define INT_MDDI_PRI INT_PMDH
-#define INT_MDDI_CLIENT INT_MDC
-#define INT_NAND_WR_ER_DONE INT_EBI2_WR_ER_DONE
-#define INT_NAND_OP_DONE INT_EBI2_OP_DONE
-
-#define NR_MSM_IRQS 128
-#define NR_GPIO_IRQS 182
-#define PMIC8058_IRQ_BASE (NR_MSM_IRQS + NR_GPIO_IRQS)
-#define NR_PMIC8058_GPIO_IRQS 40
-#define NR_PMIC8058_MPP_IRQS 12
-#define NR_PMIC8058_MISC_IRQS 8
-#define NR_PMIC8058_IRQS (NR_PMIC8058_GPIO_IRQS +\
- NR_PMIC8058_MPP_IRQS +\
- NR_PMIC8058_MISC_IRQS)
-#define NR_BOARD_IRQS NR_PMIC8058_IRQS
-
-#endif /* __ASM_ARCH_MSM_IRQS_7X30_H */
diff --git a/arch/arm/mach-msm/include/mach/irqs-8x50.h b/arch/arm/mach-msm/include/mach/irqs-8x50.h
deleted file mode 100644
index 26adbe0e9406..000000000000
--- a/arch/arm/mach-msm/include/mach/irqs-8x50.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MSM_IRQS_8XXX_H
-#define __ASM_ARCH_MSM_IRQS_8XXX_H
-
-/* MSM ACPU Interrupt Numbers */
-
-#define INT_A9_M2A_0 0
-#define INT_A9_M2A_1 1
-#define INT_A9_M2A_2 2
-#define INT_A9_M2A_3 3
-#define INT_A9_M2A_4 4
-#define INT_A9_M2A_5 5
-#define INT_A9_M2A_6 6
-#define INT_GP_TIMER_EXP 7
-#define INT_DEBUG_TIMER_EXP 8
-#define INT_SIRC_0 9
-#define INT_SDC3_0 10
-#define INT_SDC3_1 11
-#define INT_SDC4_0 12
-#define INT_SDC4_1 13
-#define INT_AD6_EXT_VFR 14
-#define INT_USB_OTG 15
-#define INT_MDDI_PRI 16
-#define INT_MDDI_EXT 17
-#define INT_MDDI_CLIENT 18
-#define INT_MDP 19
-#define INT_GRAPHICS 20
-#define INT_ADM_AARM 21
-#define INT_ADSP_A11 22
-#define INT_ADSP_A9_A11 23
-#define INT_SDC1_0 24
-#define INT_SDC1_1 25
-#define INT_SDC2_0 26
-#define INT_SDC2_1 27
-#define INT_KEYSENSE 28
-#define INT_TCHSCRN_SSBI 29
-#define INT_TCHSCRN1 30
-#define INT_TCHSCRN2 31
-
-#define INT_TCSR_MPRPH_SC1 (32 + 0)
-#define INT_USB_FS2 (32 + 1)
-#define INT_PWB_I2C (32 + 2)
-#define INT_SOFTRESET (32 + 3)
-#define INT_NAND_WR_ER_DONE (32 + 4)
-#define INT_NAND_OP_DONE (32 + 5)
-#define INT_TCSR_MPRPH_SC2 (32 + 6)
-#define INT_OP_PEN (32 + 7)
-#define INT_AD_HSSD (32 + 8)
-#define INT_ARM11_PM (32 + 9)
-#define INT_SDMA_NON_SECURE (32 + 10)
-#define INT_TSIF_IRQ (32 + 11)
-#define INT_UART1DM_IRQ (32 + 12)
-#define INT_UART1DM_RX (32 + 13)
-#define INT_SDMA_SECURE (32 + 14)
-#define INT_SI2S_SLAVE (32 + 15)
-#define INT_SC_I2CPU (32 + 16)
-#define INT_SC_DBG_RDTRFULL (32 + 17)
-#define INT_SC_DBG_WDTRFULL (32 + 18)
-#define INT_SCPLL_CTL_DONE (32 + 19)
-#define INT_UART2DM_IRQ (32 + 20)
-#define INT_UART2DM_RX (32 + 21)
-#define INT_VDC_MEC (32 + 22)
-#define INT_VDC_DB (32 + 23)
-#define INT_VDC_AXI (32 + 24)
-#define INT_VFE (32 + 25)
-#define INT_USB_HS (32 + 26)
-#define INT_AUDIO_OUT0 (32 + 27)
-#define INT_AUDIO_OUT1 (32 + 28)
-#define INT_CRYPTO (32 + 29)
-#define INT_AD6M_IDLE (32 + 30)
-#define INT_SIRC_1 (32 + 31)
-
-#define NR_GPIO_IRQS 165
-#define NR_MSM_IRQS 64
-#define NR_BOARD_IRQS 64
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/irqs.h b/arch/arm/mach-msm/include/mach/irqs.h
deleted file mode 100644
index 164d355c96ea..000000000000
--- a/arch/arm/mach-msm/include/mach/irqs.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IRQS_H
-#define __ASM_ARCH_MSM_IRQS_H
-
-#define MSM_IRQ_BIT(irq) (1 << ((irq) & 31))
-
-#if defined(CONFIG_ARCH_MSM7X30)
-#include "irqs-7x30.h"
-#elif defined(CONFIG_ARCH_QSD8X50)
-#include "irqs-8x50.h"
-#include "sirc.h"
-#elif defined(CONFIG_ARCH_MSM_ARM11)
-#include "irqs-7x00.h"
-#else
-#error "Unknown architecture specification"
-#endif
-
-#define NR_IRQS (NR_MSM_IRQS + NR_GPIO_IRQS + NR_BOARD_IRQS)
-#define MSM_GPIO_TO_INT(n) (NR_MSM_IRQS + (n))
-#define MSM_INT_TO_REG(base, irq) (base + irq / 32)
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_gpiomux.h b/arch/arm/mach-msm/include/mach/msm_gpiomux.h
deleted file mode 100644
index 0c7d3936e02f..000000000000
--- a/arch/arm/mach-msm/include/mach/msm_gpiomux.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _LINUX_MSM_GPIOMUX_H
-#define _LINUX_MSM_GPIOMUX_H
-
-#ifdef CONFIG_MSM_GPIOMUX
-
-/* Increment a gpio's reference count, possibly activating the line. */
-int __must_check msm_gpiomux_get(unsigned gpio);
-
-/* Decrement a gpio's reference count, possibly suspending the line. */
-int msm_gpiomux_put(unsigned gpio);
-
-#else
-
-static inline int __must_check msm_gpiomux_get(unsigned gpio)
-{
- return -ENOSYS;
-}
-
-static inline int msm_gpiomux_put(unsigned gpio)
-{
- return -ENOSYS;
-}
-
-#endif
-
-#endif /* _LINUX_MSM_GPIOMUX_H */
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h
deleted file mode 100644
index 67dc0e98b958..000000000000
--- a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/* arch/arm/mach-msm/include/mach/msm_iomap.h
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- *
- * The MSM peripherals are spread all over across 768MB of physical
- * space, which makes just having a simple IO_ADDRESS macro to slide
- * them into the right virtual location rough. Instead, we will
- * provide a master phys->virt mapping for peripherals here.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IOMAP_7X00_H
-#define __ASM_ARCH_MSM_IOMAP_7X00_H
-
-#include <asm/sizes.h>
-
-/* Physical base address and size of peripherals.
- * Ordered by the virtual base addresses they will be mapped at.
- *
- * MSM_VIC_BASE must be an value that can be loaded via a "mov"
- * instruction, otherwise entry-macro.S will not compile.
- *
- * If you add or remove entries here, you'll want to edit the
- * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
- * changes.
- *
- */
-
-#define MSM_VIC_BASE IOMEM(0xE0000000)
-#define MSM_VIC_PHYS 0xC0000000
-#define MSM_VIC_SIZE SZ_4K
-
-#define MSM7X00_CSR_PHYS 0xC0100000
-#define MSM7X00_CSR_SIZE SZ_4K
-
-#define MSM_DMOV_BASE IOMEM(0xE0002000)
-#define MSM_DMOV_PHYS 0xA9700000
-#define MSM_DMOV_SIZE SZ_4K
-
-#define MSM7X00_GPIO1_PHYS 0xA9200000
-#define MSM7X00_GPIO1_SIZE SZ_4K
-
-#define MSM7X00_GPIO2_PHYS 0xA9300000
-#define MSM7X00_GPIO2_SIZE SZ_4K
-
-#define MSM_CLK_CTL_BASE IOMEM(0xE0005000)
-#define MSM_CLK_CTL_PHYS 0xA8600000
-#define MSM_CLK_CTL_SIZE SZ_4K
-
-#define MSM_SHARED_RAM_BASE IOMEM(0xE0100000)
-#define MSM_SHARED_RAM_PHYS 0x01F00000
-#define MSM_SHARED_RAM_SIZE SZ_1M
-
-#define MSM_UART1_PHYS 0xA9A00000
-#define MSM_UART1_SIZE SZ_4K
-
-#define MSM_UART2_PHYS 0xA9B00000
-#define MSM_UART2_SIZE SZ_4K
-
-#define MSM_UART3_PHYS 0xA9C00000
-#define MSM_UART3_SIZE SZ_4K
-
-#define MSM_SDC1_PHYS 0xA0400000
-#define MSM_SDC1_SIZE SZ_4K
-
-#define MSM_SDC2_PHYS 0xA0500000
-#define MSM_SDC2_SIZE SZ_4K
-
-#define MSM_SDC3_PHYS 0xA0600000
-#define MSM_SDC3_SIZE SZ_4K
-
-#define MSM_SDC4_PHYS 0xA0700000
-#define MSM_SDC4_SIZE SZ_4K
-
-#define MSM_I2C_PHYS 0xA9900000
-#define MSM_I2C_SIZE SZ_4K
-
-#define MSM_HSUSB_PHYS 0xA0800000
-#define MSM_HSUSB_SIZE SZ_4K
-
-#define MSM_PMDH_PHYS 0xAA600000
-#define MSM_PMDH_SIZE SZ_4K
-
-#define MSM_EMDH_PHYS 0xAA700000
-#define MSM_EMDH_SIZE SZ_4K
-
-#define MSM_MDP_PHYS 0xAA200000
-#define MSM_MDP_SIZE 0x000F0000
-
-#define MSM_MDC_PHYS 0xAA500000
-#define MSM_MDC_SIZE SZ_1M
-
-#define MSM_AD5_PHYS 0xAC000000
-#define MSM_AD5_SIZE (SZ_1M*13)
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
deleted file mode 100644
index 198202c267c8..000000000000
--- a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2008-2011 Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- *
- * The MSM peripherals are spread all over across 768MB of physical
- * space, which makes just having a simple IO_ADDRESS macro to slide
- * them into the right virtual location rough. Instead, we will
- * provide a master phys->virt mapping for peripherals here.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IOMAP_7X30_H
-#define __ASM_ARCH_MSM_IOMAP_7X30_H
-
-/* Physical base address and size of peripherals.
- * Ordered by the virtual base addresses they will be mapped at.
- *
- * MSM_VIC_BASE must be an value that can be loaded via a "mov"
- * instruction, otherwise entry-macro.S will not compile.
- *
- * If you add or remove entries here, you'll want to edit the
- * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
- * changes.
- *
- */
-
-#define MSM_VIC_BASE IOMEM(0xE0000000)
-#define MSM_VIC_PHYS 0xC0080000
-#define MSM_VIC_SIZE SZ_4K
-
-#define MSM7X30_CSR_PHYS 0xC0100000
-#define MSM7X30_CSR_SIZE SZ_4K
-
-#define MSM_DMOV_BASE IOMEM(0xE0002000)
-#define MSM_DMOV_PHYS 0xAC400000
-#define MSM_DMOV_SIZE SZ_4K
-
-#define MSM7X30_GPIO1_PHYS 0xAC001000
-#define MSM7X30_GPIO1_SIZE SZ_4K
-
-#define MSM7X30_GPIO2_PHYS 0xAC101000
-#define MSM7X30_GPIO2_SIZE SZ_4K
-
-#define MSM_CLK_CTL_BASE IOMEM(0xE0005000)
-#define MSM_CLK_CTL_PHYS 0xAB800000
-#define MSM_CLK_CTL_SIZE SZ_4K
-
-#define MSM_CLK_CTL_SH2_BASE IOMEM(0xE0006000)
-#define MSM_CLK_CTL_SH2_PHYS 0xABA01000
-#define MSM_CLK_CTL_SH2_SIZE SZ_4K
-
-#define MSM_ACC_BASE IOMEM(0xE0007000)
-#define MSM_ACC_PHYS 0xC0101000
-#define MSM_ACC_SIZE SZ_4K
-
-#define MSM_SAW_BASE IOMEM(0xE0008000)
-#define MSM_SAW_PHYS 0xC0102000
-#define MSM_SAW_SIZE SZ_4K
-
-#define MSM_GCC_BASE IOMEM(0xE0009000)
-#define MSM_GCC_PHYS 0xC0182000
-#define MSM_GCC_SIZE SZ_4K
-
-#define MSM_TCSR_BASE IOMEM(0xE000A000)
-#define MSM_TCSR_PHYS 0xAB600000
-#define MSM_TCSR_SIZE SZ_4K
-
-#define MSM_SHARED_RAM_BASE IOMEM(0xE0100000)
-#define MSM_SHARED_RAM_PHYS 0x00100000
-#define MSM_SHARED_RAM_SIZE SZ_1M
-
-#define MSM_UART1_PHYS 0xACA00000
-#define MSM_UART1_SIZE SZ_4K
-
-#define MSM_UART2_PHYS 0xACB00000
-#define MSM_UART2_SIZE SZ_4K
-
-#define MSM_UART3_PHYS 0xACC00000
-#define MSM_UART3_SIZE SZ_4K
-
-#define MSM_MDC_BASE IOMEM(0xE0200000)
-#define MSM_MDC_PHYS 0xAA500000
-#define MSM_MDC_SIZE SZ_1M
-
-#define MSM_AD5_BASE IOMEM(0xE0300000)
-#define MSM_AD5_PHYS 0xA7000000
-#define MSM_AD5_SIZE (SZ_1M*13)
-
-#define MSM_HSUSB_PHYS 0xA3600000
-#define MSM_HSUSB_SIZE SZ_1K
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
deleted file mode 100644
index 0faa894729b7..000000000000
--- a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2008-2011 Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- *
- * The MSM peripherals are spread all over across 768MB of physical
- * space, which makes just having a simple IO_ADDRESS macro to slide
- * them into the right virtual location rough. Instead, we will
- * provide a master phys->virt mapping for peripherals here.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IOMAP_8X50_H
-#define __ASM_ARCH_MSM_IOMAP_8X50_H
-
-/* Physical base address and size of peripherals.
- * Ordered by the virtual base addresses they will be mapped at.
- *
- * MSM_VIC_BASE must be an value that can be loaded via a "mov"
- * instruction, otherwise entry-macro.S will not compile.
- *
- * If you add or remove entries here, you'll want to edit the
- * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
- * changes.
- *
- */
-
-#define MSM_VIC_BASE IOMEM(0xE0000000)
-#define MSM_VIC_PHYS 0xAC000000
-#define MSM_VIC_SIZE SZ_4K
-
-#define QSD8X50_CSR_PHYS 0xAC100000
-#define QSD8X50_CSR_SIZE SZ_4K
-
-#define MSM_DMOV_BASE IOMEM(0xE0002000)
-#define MSM_DMOV_PHYS 0xA9700000
-#define MSM_DMOV_SIZE SZ_4K
-
-#define QSD8X50_GPIO1_PHYS 0xA9000000
-#define QSD8X50_GPIO1_SIZE SZ_4K
-
-#define QSD8X50_GPIO2_PHYS 0xA9100000
-#define QSD8X50_GPIO2_SIZE SZ_4K
-
-#define MSM_CLK_CTL_BASE IOMEM(0xE0005000)
-#define MSM_CLK_CTL_PHYS 0xA8600000
-#define MSM_CLK_CTL_SIZE SZ_4K
-
-#define MSM_SIRC_BASE IOMEM(0xE1006000)
-#define MSM_SIRC_PHYS 0xAC200000
-#define MSM_SIRC_SIZE SZ_4K
-
-#define MSM_SCPLL_BASE IOMEM(0xE1007000)
-#define MSM_SCPLL_PHYS 0xA8800000
-#define MSM_SCPLL_SIZE SZ_4K
-
-#ifdef CONFIG_MSM_SOC_REV_A
-#define MSM_SMI_BASE 0xE0000000
-#else
-#define MSM_SMI_BASE 0x00000000
-#endif
-
-#define MSM_SHARED_RAM_BASE IOMEM(0xE0100000)
-#define MSM_SHARED_RAM_PHYS (MSM_SMI_BASE + 0x00100000)
-#define MSM_SHARED_RAM_SIZE SZ_1M
-
-#define MSM_UART1_PHYS 0xA9A00000
-#define MSM_UART1_SIZE SZ_4K
-
-#define MSM_UART2_PHYS 0xA9B00000
-#define MSM_UART2_SIZE SZ_4K
-
-#define MSM_UART3_PHYS 0xA9C00000
-#define MSM_UART3_SIZE SZ_4K
-
-#define MSM_MDC_BASE IOMEM(0xE0200000)
-#define MSM_MDC_PHYS 0xAA500000
-#define MSM_MDC_SIZE SZ_1M
-
-#define MSM_AD5_BASE IOMEM(0xE0300000)
-#define MSM_AD5_PHYS 0xAC000000
-#define MSM_AD5_SIZE (SZ_1M*13)
-
-
-#define MSM_I2C_SIZE SZ_4K
-#define MSM_I2C_PHYS 0xA9900000
-
-#define MSM_HSUSB_PHYS 0xA0800000
-#define MSM_HSUSB_SIZE SZ_1K
-
-#define MSM_NAND_PHYS 0xA0A00000
-
-
-#define MSM_TSIF_PHYS (0xa0100000)
-#define MSM_TSIF_SIZE (0x200)
-
-#define MSM_TSSC_PHYS 0xAA300000
-
-#define MSM_UART1DM_PHYS 0xA0200000
-#define MSM_UART2DM_PHYS 0xA0900000
-
-
-#define MSM_SDC1_PHYS 0xA0300000
-#define MSM_SDC1_SIZE SZ_4K
-
-#define MSM_SDC2_PHYS 0xA0400000
-#define MSM_SDC2_SIZE SZ_4K
-
-#define MSM_SDC3_PHYS 0xA0500000
-#define MSM_SDC3_SIZE SZ_4K
-
-#define MSM_SDC4_PHYS 0xA0600000
-#define MSM_SDC4_SIZE SZ_4K
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h
deleted file mode 100644
index 0e4f49157684..000000000000
--- a/arch/arm/mach-msm/include/mach/msm_iomap.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- *
- * The MSM peripherals are spread all over across 768MB of physical
- * space, which makes just having a simple IO_ADDRESS macro to slide
- * them into the right virtual location rough. Instead, we will
- * provide a master phys->virt mapping for peripherals here.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_IOMAP_H
-#define __ASM_ARCH_MSM_IOMAP_H
-
-#include <asm/sizes.h>
-
-/* Physical base address and size of peripherals.
- * Ordered by the virtual base addresses they will be mapped at.
- *
- * MSM_VIC_BASE must be an value that can be loaded via a "mov"
- * instruction, otherwise entry-macro.S will not compile.
- *
- * If you add or remove entries here, you'll want to edit the
- * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
- * changes.
- *
- */
-
-#if defined(CONFIG_ARCH_MSM7X30)
-#include "msm_iomap-7x30.h"
-#elif defined(CONFIG_ARCH_QSD8X50)
-#include "msm_iomap-8x50.h"
-#else
-#include "msm_iomap-7x00.h"
-#endif
-
-/* Virtual addresses shared across all MSM targets. */
-#define MSM_CSR_BASE IOMEM(0xE0001000)
-#define MSM_GPIO1_BASE IOMEM(0xE0003000)
-#define MSM_GPIO2_BASE IOMEM(0xE0004000)
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_smd.h b/arch/arm/mach-msm/include/mach/msm_smd.h
deleted file mode 100644
index 029463ec8756..000000000000
--- a/arch/arm/mach-msm/include/mach/msm_smd.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/* linux/include/asm-arm/arch-msm/msm_smd.h
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_SMD_H
-#define __ASM_ARCH_MSM_SMD_H
-
-typedef struct smd_channel smd_channel_t;
-
-extern int (*msm_check_for_modem_crash)(void);
-
-/* warning: notify() may be called before open returns */
-int smd_open(const char *name, smd_channel_t **ch, void *priv,
- void (*notify)(void *priv, unsigned event));
-
-#define SMD_EVENT_DATA 1
-#define SMD_EVENT_OPEN 2
-#define SMD_EVENT_CLOSE 3
-
-int smd_close(smd_channel_t *ch);
-
-/* passing a null pointer for data reads and discards */
-int smd_read(smd_channel_t *ch, void *data, int len);
-
-/* Write to stream channels may do a partial write and return
-** the length actually written.
-** Write to packet channels will never do a partial write --
-** it will return the requested length written or an error.
-*/
-int smd_write(smd_channel_t *ch, const void *data, int len);
-int smd_write_atomic(smd_channel_t *ch, const void *data, int len);
-
-int smd_write_avail(smd_channel_t *ch);
-int smd_read_avail(smd_channel_t *ch);
-
-/* Returns the total size of the current packet being read.
-** Returns 0 if no packets available or a stream channel.
-*/
-int smd_cur_packet_size(smd_channel_t *ch);
-
-/* used for tty unthrottling and the like -- causes the notify()
-** callback to be called from the same lock context as is used
-** when it is called from channel updates
-*/
-void smd_kick(smd_channel_t *ch);
-
-
-#if 0
-/* these are interruptable waits which will block you until the specified
-** number of bytes are readable or writable.
-*/
-int smd_wait_until_readable(smd_channel_t *ch, int bytes);
-int smd_wait_until_writable(smd_channel_t *ch, int bytes);
-#endif
-
-typedef enum {
- SMD_PORT_DS = 0,
- SMD_PORT_DIAG,
- SMD_PORT_RPC_CALL,
- SMD_PORT_RPC_REPLY,
- SMD_PORT_BT,
- SMD_PORT_CONTROL,
- SMD_PORT_MEMCPY_SPARE1,
- SMD_PORT_DATA1,
- SMD_PORT_DATA2,
- SMD_PORT_DATA3,
- SMD_PORT_DATA4,
- SMD_PORT_DATA5,
- SMD_PORT_DATA6,
- SMD_PORT_DATA7,
- SMD_PORT_DATA8,
- SMD_PORT_DATA9,
- SMD_PORT_DATA10,
- SMD_PORT_DATA11,
- SMD_PORT_DATA12,
- SMD_PORT_DATA13,
- SMD_PORT_DATA14,
- SMD_PORT_DATA15,
- SMD_PORT_DATA16,
- SMD_PORT_DATA17,
- SMD_PORT_DATA18,
- SMD_PORT_DATA19,
- SMD_PORT_DATA20,
- SMD_PORT_GPS_NMEA,
- SMD_PORT_BRIDGE_1,
- SMD_PORT_BRIDGE_2,
- SMD_PORT_BRIDGE_3,
- SMD_PORT_BRIDGE_4,
- SMD_PORT_BRIDGE_5,
- SMD_PORT_LOOPBACK,
- SMD_PORT_CS_APPS_MODEM,
- SMD_PORT_CS_APPS_DSP,
- SMD_PORT_CS_MODEM_DSP,
- SMD_NUM_PORTS,
-} smd_port_id_type;
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/sirc.h b/arch/arm/mach-msm/include/mach/sirc.h
deleted file mode 100644
index ef55868a5b8a..000000000000
--- a/arch/arm/mach-msm/include/mach/sirc.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MSM_SIRC_H
-#define __ASM_ARCH_MSM_SIRC_H
-
-struct sirc_regs_t {
- void *int_enable;
- void *int_enable_clear;
- void *int_enable_set;
- void *int_type;
- void *int_polarity;
- void *int_clear;
-};
-
-struct sirc_cascade_regs {
- void *int_status;
- unsigned int cascade_irq;
-};
-
-void msm_init_sirc(void);
-void msm_sirc_enter_sleep(void);
-void msm_sirc_exit_sleep(void);
-
-#if defined(CONFIG_ARCH_MSM_SCORPION)
-
-#include <mach/msm_iomap.h>
-
-/*
- * Secondary interrupt controller interrupts
- */
-
-#define FIRST_SIRC_IRQ (NR_MSM_IRQS + NR_GPIO_IRQS)
-
-#define INT_UART1 (FIRST_SIRC_IRQ + 0)
-#define INT_UART2 (FIRST_SIRC_IRQ + 1)
-#define INT_UART3 (FIRST_SIRC_IRQ + 2)
-#define INT_UART1_RX (FIRST_SIRC_IRQ + 3)
-#define INT_UART2_RX (FIRST_SIRC_IRQ + 4)
-#define INT_UART3_RX (FIRST_SIRC_IRQ + 5)
-#define INT_SPI_INPUT (FIRST_SIRC_IRQ + 6)
-#define INT_SPI_OUTPUT (FIRST_SIRC_IRQ + 7)
-#define INT_SPI_ERROR (FIRST_SIRC_IRQ + 8)
-#define INT_GPIO_GROUP1 (FIRST_SIRC_IRQ + 9)
-#define INT_GPIO_GROUP2 (FIRST_SIRC_IRQ + 10)
-#define INT_GPIO_GROUP1_SECURE (FIRST_SIRC_IRQ + 11)
-#define INT_GPIO_GROUP2_SECURE (FIRST_SIRC_IRQ + 12)
-#define INT_AVS_SVIC (FIRST_SIRC_IRQ + 13)
-#define INT_AVS_REQ_UP (FIRST_SIRC_IRQ + 14)
-#define INT_AVS_REQ_DOWN (FIRST_SIRC_IRQ + 15)
-#define INT_PBUS_ERR (FIRST_SIRC_IRQ + 16)
-#define INT_AXI_ERR (FIRST_SIRC_IRQ + 17)
-#define INT_SMI_ERR (FIRST_SIRC_IRQ + 18)
-#define INT_EBI1_ERR (FIRST_SIRC_IRQ + 19)
-#define INT_IMEM_ERR (FIRST_SIRC_IRQ + 20)
-#define INT_TEMP_SENSOR (FIRST_SIRC_IRQ + 21)
-#define INT_TV_ENC (FIRST_SIRC_IRQ + 22)
-#define INT_GRP2D (FIRST_SIRC_IRQ + 23)
-#define INT_GSBI_QUP (FIRST_SIRC_IRQ + 24)
-#define INT_SC_ACG (FIRST_SIRC_IRQ + 25)
-#define INT_WDT0 (FIRST_SIRC_IRQ + 26)
-#define INT_WDT1 (FIRST_SIRC_IRQ + 27)
-
-#if defined(CONFIG_MSM_SOC_REV_A)
-#define NR_SIRC_IRQS 28
-#define SIRC_MASK 0x0FFFFFFF
-#else
-#define NR_SIRC_IRQS 23
-#define SIRC_MASK 0x007FFFFF
-#endif
-
-#define LAST_SIRC_IRQ (FIRST_SIRC_IRQ + NR_SIRC_IRQS - 1)
-
-#define SPSS_SIRC_INT_SELECT (MSM_SIRC_BASE + 0x00)
-#define SPSS_SIRC_INT_ENABLE (MSM_SIRC_BASE + 0x04)
-#define SPSS_SIRC_INT_ENABLE_CLEAR (MSM_SIRC_BASE + 0x08)
-#define SPSS_SIRC_INT_ENABLE_SET (MSM_SIRC_BASE + 0x0C)
-#define SPSS_SIRC_INT_TYPE (MSM_SIRC_BASE + 0x10)
-#define SPSS_SIRC_INT_POLARITY (MSM_SIRC_BASE + 0x14)
-#define SPSS_SIRC_SECURITY (MSM_SIRC_BASE + 0x18)
-#define SPSS_SIRC_IRQ_STATUS (MSM_SIRC_BASE + 0x1C)
-#define SPSS_SIRC_IRQ1_STATUS (MSM_SIRC_BASE + 0x20)
-#define SPSS_SIRC_RAW_STATUS (MSM_SIRC_BASE + 0x24)
-#define SPSS_SIRC_INT_CLEAR (MSM_SIRC_BASE + 0x28)
-#define SPSS_SIRC_SOFT_INT (MSM_SIRC_BASE + 0x2C)
-
-#endif
-
-#endif
diff --git a/arch/arm/mach-msm/include/mach/vreg.h b/arch/arm/mach-msm/include/mach/vreg.h
deleted file mode 100644
index 6626e7864e28..000000000000
--- a/arch/arm/mach-msm/include/mach/vreg.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/include/asm-arm/arch-msm/vreg.h
- *
- * Copyright (C) 2008 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ARCH_ARM_MACH_MSM_VREG_H
-#define __ARCH_ARM_MACH_MSM_VREG_H
-
-struct vreg;
-
-struct vreg *vreg_get(struct device *dev, const char *id);
-void vreg_put(struct vreg *vreg);
-
-int vreg_enable(struct vreg *vreg);
-int vreg_disable(struct vreg *vreg);
-int vreg_set_level(struct vreg *vreg, unsigned mv);
-
-#endif
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
deleted file mode 100644
index b042dca1f633..000000000000
--- a/arch/arm/mach-msm/io.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/* arch/arm/mach-msm/io.c
- *
- * MSM7K, QSD io support
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/bug.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/export.h>
-
-#include <mach/hardware.h>
-#include <asm/page.h>
-#include <mach/msm_iomap.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-
-#define MSM_CHIP_DEVICE_TYPE(name, chip, mem_type) { \
- .virtual = (unsigned long) MSM_##name##_BASE, \
- .pfn = __phys_to_pfn(chip##_##name##_PHYS), \
- .length = chip##_##name##_SIZE, \
- .type = mem_type, \
- }
-
-#define MSM_DEVICE_TYPE(name, mem_type) \
- MSM_CHIP_DEVICE_TYPE(name, MSM, mem_type)
-#define MSM_CHIP_DEVICE(name, chip) \
- MSM_CHIP_DEVICE_TYPE(name, chip, MT_DEVICE)
-#define MSM_DEVICE(name) MSM_CHIP_DEVICE(name, MSM)
-
-#if defined(CONFIG_ARCH_MSM7X00A)
-static struct map_desc msm_io_desc[] __initdata = {
- MSM_DEVICE_TYPE(VIC, MT_DEVICE_NONSHARED),
- MSM_CHIP_DEVICE_TYPE(CSR, MSM7X00, MT_DEVICE_NONSHARED),
- MSM_DEVICE_TYPE(DMOV, MT_DEVICE_NONSHARED),
- MSM_CHIP_DEVICE_TYPE(GPIO1, MSM7X00, MT_DEVICE_NONSHARED),
- MSM_CHIP_DEVICE_TYPE(GPIO2, MSM7X00, MT_DEVICE_NONSHARED),
- MSM_DEVICE_TYPE(CLK_CTL, MT_DEVICE_NONSHARED),
- {
- .virtual = (unsigned long) MSM_SHARED_RAM_BASE,
- .pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS),
- .length = MSM_SHARED_RAM_SIZE,
- .type = MT_DEVICE,
- },
-#if defined(CONFIG_DEBUG_MSM_UART)
- {
- /* Must be last: virtual and pfn filled in by debug_ll_addr() */
- .length = SZ_4K,
- .type = MT_DEVICE_NONSHARED,
- }
-#endif
-};
-
-void __init msm_map_common_io(void)
-{
- size_t size = ARRAY_SIZE(msm_io_desc);
-
- /* Make sure the peripheral register window is closed, since
- * we will use PTE flags (TEX[1]=1,B=0,C=1) to determine which
- * pages are peripheral interface or not.
- */
- asm("mcr p15, 0, %0, c15, c2, 4" : : "r" (0));
-#if defined(CONFIG_DEBUG_MSM_UART)
-#ifdef CONFIG_MMU
- debug_ll_addr(&msm_io_desc[size - 1].pfn,
- &msm_io_desc[size - 1].virtual);
-#endif
- msm_io_desc[size - 1].pfn = __phys_to_pfn(msm_io_desc[size - 1].pfn);
-#endif
- iotable_init(msm_io_desc, size);
-}
-#endif
-
-#ifdef CONFIG_ARCH_QSD8X50
-static struct map_desc qsd8x50_io_desc[] __initdata = {
- MSM_DEVICE(VIC),
- MSM_CHIP_DEVICE(CSR, QSD8X50),
- MSM_DEVICE(DMOV),
- MSM_CHIP_DEVICE(GPIO1, QSD8X50),
- MSM_CHIP_DEVICE(GPIO2, QSD8X50),
- MSM_DEVICE(CLK_CTL),
- MSM_DEVICE(SIRC),
- MSM_DEVICE(SCPLL),
- MSM_DEVICE(AD5),
- MSM_DEVICE(MDC),
- {
- .virtual = (unsigned long) MSM_SHARED_RAM_BASE,
- .pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS),
- .length = MSM_SHARED_RAM_SIZE,
- .type = MT_DEVICE,
- },
-};
-
-void __init msm_map_qsd8x50_io(void)
-{
- debug_ll_io_init();
- iotable_init(qsd8x50_io_desc, ARRAY_SIZE(qsd8x50_io_desc));
-}
-#endif /* CONFIG_ARCH_QSD8X50 */
-
-#ifdef CONFIG_ARCH_MSM7X30
-static struct map_desc msm7x30_io_desc[] __initdata = {
- MSM_DEVICE(VIC),
- MSM_CHIP_DEVICE(CSR, MSM7X30),
- MSM_DEVICE(DMOV),
- MSM_CHIP_DEVICE(GPIO1, MSM7X30),
- MSM_CHIP_DEVICE(GPIO2, MSM7X30),
- MSM_DEVICE(CLK_CTL),
- MSM_DEVICE(CLK_CTL_SH2),
- MSM_DEVICE(AD5),
- MSM_DEVICE(MDC),
- MSM_DEVICE(ACC),
- MSM_DEVICE(SAW),
- MSM_DEVICE(GCC),
- MSM_DEVICE(TCSR),
- {
- .virtual = (unsigned long) MSM_SHARED_RAM_BASE,
- .pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS),
- .length = MSM_SHARED_RAM_SIZE,
- .type = MT_DEVICE,
- },
-};
-
-void __init msm_map_msm7x30_io(void)
-{
- debug_ll_io_init();
- iotable_init(msm7x30_io_desc, ARRAY_SIZE(msm7x30_io_desc));
-}
-#endif /* CONFIG_ARCH_MSM7X30 */
-
-#ifdef CONFIG_ARCH_MSM7X00A
-void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size,
- unsigned int mtype, void *caller)
-{
- if (mtype == MT_DEVICE) {
- /* The peripherals in the 88000000 - D0000000 range
- * are only accessible by type MT_DEVICE_NONSHARED.
- * Adjust mtype as necessary to make this "just work."
- */
- if ((phys_addr >= 0x88000000) && (phys_addr < 0xD0000000))
- mtype = MT_DEVICE_NONSHARED;
- }
-
- return __arm_ioremap_caller(phys_addr, size, mtype, caller);
-}
-#endif
diff --git a/arch/arm/mach-msm/irq-vic.c b/arch/arm/mach-msm/irq-vic.c
deleted file mode 100644
index 1b54f807c2d0..000000000000
--- a/arch/arm/mach-msm/irq-vic.c
+++ /dev/null
@@ -1,363 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2009, Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ptrace.h>
-#include <linux/timer.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/cacheflush.h>
-
-#include <mach/hardware.h>
-
-#include <mach/msm_iomap.h>
-
-#include "smd_private.h"
-
-enum {
- IRQ_DEBUG_SLEEP_INT_TRIGGER = 1U << 0,
- IRQ_DEBUG_SLEEP_INT = 1U << 1,
- IRQ_DEBUG_SLEEP_ABORT = 1U << 2,
- IRQ_DEBUG_SLEEP = 1U << 3,
- IRQ_DEBUG_SLEEP_REQUEST = 1U << 4,
-};
-static int msm_irq_debug_mask;
-module_param_named(debug_mask, msm_irq_debug_mask, int,
- S_IRUGO | S_IWUSR | S_IWGRP);
-
-#define VIC_REG(off) (MSM_VIC_BASE + (off))
-#define VIC_INT_TO_REG_ADDR(base, irq) (base + (irq / 32) * 4)
-#define VIC_INT_TO_REG_INDEX(irq) ((irq >> 5) & 3)
-
-#define VIC_INT_SELECT0 VIC_REG(0x0000) /* 1: FIQ, 0: IRQ */
-#define VIC_INT_SELECT1 VIC_REG(0x0004) /* 1: FIQ, 0: IRQ */
-#define VIC_INT_SELECT2 VIC_REG(0x0008) /* 1: FIQ, 0: IRQ */
-#define VIC_INT_SELECT3 VIC_REG(0x000C) /* 1: FIQ, 0: IRQ */
-#define VIC_INT_EN0 VIC_REG(0x0010)
-#define VIC_INT_EN1 VIC_REG(0x0014)
-#define VIC_INT_EN2 VIC_REG(0x0018)
-#define VIC_INT_EN3 VIC_REG(0x001C)
-#define VIC_INT_ENCLEAR0 VIC_REG(0x0020)
-#define VIC_INT_ENCLEAR1 VIC_REG(0x0024)
-#define VIC_INT_ENCLEAR2 VIC_REG(0x0028)
-#define VIC_INT_ENCLEAR3 VIC_REG(0x002C)
-#define VIC_INT_ENSET0 VIC_REG(0x0030)
-#define VIC_INT_ENSET1 VIC_REG(0x0034)
-#define VIC_INT_ENSET2 VIC_REG(0x0038)
-#define VIC_INT_ENSET3 VIC_REG(0x003C)
-#define VIC_INT_TYPE0 VIC_REG(0x0040) /* 1: EDGE, 0: LEVEL */
-#define VIC_INT_TYPE1 VIC_REG(0x0044) /* 1: EDGE, 0: LEVEL */
-#define VIC_INT_TYPE2 VIC_REG(0x0048) /* 1: EDGE, 0: LEVEL */
-#define VIC_INT_TYPE3 VIC_REG(0x004C) /* 1: EDGE, 0: LEVEL */
-#define VIC_INT_POLARITY0 VIC_REG(0x0050) /* 1: NEG, 0: POS */
-#define VIC_INT_POLARITY1 VIC_REG(0x0054) /* 1: NEG, 0: POS */
-#define VIC_INT_POLARITY2 VIC_REG(0x0058) /* 1: NEG, 0: POS */
-#define VIC_INT_POLARITY3 VIC_REG(0x005C) /* 1: NEG, 0: POS */
-#define VIC_NO_PEND_VAL VIC_REG(0x0060)
-
-#if defined(CONFIG_ARCH_MSM_SCORPION)
-#define VIC_NO_PEND_VAL_FIQ VIC_REG(0x0064)
-#define VIC_INT_MASTEREN VIC_REG(0x0068) /* 1: IRQ, 2: FIQ */
-#define VIC_CONFIG VIC_REG(0x006C) /* 1: USE SC VIC */
-#else
-#define VIC_INT_MASTEREN VIC_REG(0x0064) /* 1: IRQ, 2: FIQ */
-#define VIC_PROTECTION VIC_REG(0x006C) /* 1: ENABLE */
-#define VIC_CONFIG VIC_REG(0x0068) /* 1: USE ARM1136 VIC */
-#endif
-
-#define VIC_IRQ_STATUS0 VIC_REG(0x0080)
-#define VIC_IRQ_STATUS1 VIC_REG(0x0084)
-#define VIC_IRQ_STATUS2 VIC_REG(0x0088)
-#define VIC_IRQ_STATUS3 VIC_REG(0x008C)
-#define VIC_FIQ_STATUS0 VIC_REG(0x0090)
-#define VIC_FIQ_STATUS1 VIC_REG(0x0094)
-#define VIC_FIQ_STATUS2 VIC_REG(0x0098)
-#define VIC_FIQ_STATUS3 VIC_REG(0x009C)
-#define VIC_RAW_STATUS0 VIC_REG(0x00A0)
-#define VIC_RAW_STATUS1 VIC_REG(0x00A4)
-#define VIC_RAW_STATUS2 VIC_REG(0x00A8)
-#define VIC_RAW_STATUS3 VIC_REG(0x00AC)
-#define VIC_INT_CLEAR0 VIC_REG(0x00B0)
-#define VIC_INT_CLEAR1 VIC_REG(0x00B4)
-#define VIC_INT_CLEAR2 VIC_REG(0x00B8)
-#define VIC_INT_CLEAR3 VIC_REG(0x00BC)
-#define VIC_SOFTINT0 VIC_REG(0x00C0)
-#define VIC_SOFTINT1 VIC_REG(0x00C4)
-#define VIC_SOFTINT2 VIC_REG(0x00C8)
-#define VIC_SOFTINT3 VIC_REG(0x00CC)
-#define VIC_IRQ_VEC_RD VIC_REG(0x00D0) /* pending int # */
-#define VIC_IRQ_VEC_PEND_RD VIC_REG(0x00D4) /* pending vector addr */
-#define VIC_IRQ_VEC_WR VIC_REG(0x00D8)
-
-#if defined(CONFIG_ARCH_MSM_SCORPION)
-#define VIC_FIQ_VEC_RD VIC_REG(0x00DC)
-#define VIC_FIQ_VEC_PEND_RD VIC_REG(0x00E0)
-#define VIC_FIQ_VEC_WR VIC_REG(0x00E4)
-#define VIC_IRQ_IN_SERVICE VIC_REG(0x00E8)
-#define VIC_IRQ_IN_STACK VIC_REG(0x00EC)
-#define VIC_FIQ_IN_SERVICE VIC_REG(0x00F0)
-#define VIC_FIQ_IN_STACK VIC_REG(0x00F4)
-#define VIC_TEST_BUS_SEL VIC_REG(0x00F8)
-#define VIC_IRQ_CTRL_CONFIG VIC_REG(0x00FC)
-#else
-#define VIC_IRQ_IN_SERVICE VIC_REG(0x00E0)
-#define VIC_IRQ_IN_STACK VIC_REG(0x00E4)
-#define VIC_TEST_BUS_SEL VIC_REG(0x00E8)
-#endif
-
-#define VIC_VECTPRIORITY(n) VIC_REG(0x0200+((n) * 4))
-#define VIC_VECTADDR(n) VIC_REG(0x0400+((n) * 4))
-
-#if defined(CONFIG_ARCH_MSM7X30)
-#define VIC_NUM_REGS 4
-#else
-#define VIC_NUM_REGS 2
-#endif
-
-#if VIC_NUM_REGS == 2
-#define DPRINT_REGS(base_reg, format, ...) \
- printk(KERN_INFO format " %x %x\n", ##__VA_ARGS__, \
- readl(base_reg ## 0), readl(base_reg ## 1))
-#define DPRINT_ARRAY(array, format, ...) \
- printk(KERN_INFO format " %x %x\n", ##__VA_ARGS__, \
- array[0], array[1])
-#elif VIC_NUM_REGS == 4
-#define DPRINT_REGS(base_reg, format, ...) \
- printk(KERN_INFO format " %x %x %x %x\n", ##__VA_ARGS__, \
- readl(base_reg ## 0), readl(base_reg ## 1), \
- readl(base_reg ## 2), readl(base_reg ## 3))
-#define DPRINT_ARRAY(array, format, ...) \
- printk(KERN_INFO format " %x %x %x %x\n", ##__VA_ARGS__, \
- array[0], array[1], \
- array[2], array[3])
-#else
-#error "VIC_NUM_REGS set to illegal value"
-#endif
-
-static uint32_t msm_irq_smsm_wake_enable[2];
-static struct {
- uint32_t int_en[2];
- uint32_t int_type;
- uint32_t int_polarity;
- uint32_t int_select;
-} msm_irq_shadow_reg[VIC_NUM_REGS];
-static uint32_t msm_irq_idle_disable[VIC_NUM_REGS];
-
-#define SMSM_FAKE_IRQ (0xff)
-static uint8_t msm_irq_to_smsm[NR_IRQS] = {
- [INT_MDDI_EXT] = 1,
- [INT_MDDI_PRI] = 2,
- [INT_MDDI_CLIENT] = 3,
- [INT_USB_OTG] = 4,
-
- [INT_PWB_I2C] = 5,
- [INT_SDC1_0] = 6,
- [INT_SDC1_1] = 7,
- [INT_SDC2_0] = 8,
-
- [INT_SDC2_1] = 9,
- [INT_ADSP_A9_A11] = 10,
- [INT_UART1] = 11,
- [INT_UART2] = 12,
-
- [INT_UART3] = 13,
- [INT_UART1_RX] = 14,
- [INT_UART2_RX] = 15,
- [INT_UART3_RX] = 16,
-
- [INT_UART1DM_IRQ] = 17,
- [INT_UART1DM_RX] = 18,
- [INT_KEYSENSE] = 19,
-#if !defined(CONFIG_ARCH_MSM7X30)
- [INT_AD_HSSD] = 20,
-#endif
-
- [INT_NAND_WR_ER_DONE] = 21,
- [INT_NAND_OP_DONE] = 22,
- [INT_TCHSCRN1] = 23,
- [INT_TCHSCRN2] = 24,
-
- [INT_TCHSCRN_SSBI] = 25,
- [INT_USB_HS] = 26,
- [INT_UART2DM_RX] = 27,
- [INT_UART2DM_IRQ] = 28,
-
- [INT_SDC4_1] = 29,
- [INT_SDC4_0] = 30,
- [INT_SDC3_1] = 31,
- [INT_SDC3_0] = 32,
-
- /* fake wakeup interrupts */
- [INT_GPIO_GROUP1] = SMSM_FAKE_IRQ,
- [INT_GPIO_GROUP2] = SMSM_FAKE_IRQ,
- [INT_A9_M2A_0] = SMSM_FAKE_IRQ,
- [INT_A9_M2A_1] = SMSM_FAKE_IRQ,
- [INT_A9_M2A_5] = SMSM_FAKE_IRQ,
- [INT_GP_TIMER_EXP] = SMSM_FAKE_IRQ,
- [INT_DEBUG_TIMER_EXP] = SMSM_FAKE_IRQ,
- [INT_ADSP_A11] = SMSM_FAKE_IRQ,
-#ifdef CONFIG_ARCH_QSD8X50
- [INT_SIRC_0] = SMSM_FAKE_IRQ,
- [INT_SIRC_1] = SMSM_FAKE_IRQ,
-#endif
-};
-
-static inline void msm_irq_write_all_regs(void __iomem *base, unsigned int val)
-{
- int i;
-
- for (i = 0; i < VIC_NUM_REGS; i++)
- writel(val, base + (i * 4));
-}
-
-static void msm_irq_ack(struct irq_data *d)
-{
- void __iomem *reg = VIC_INT_TO_REG_ADDR(VIC_INT_CLEAR0, d->irq);
- writel(1 << (d->irq & 31), reg);
-}
-
-static void msm_irq_mask(struct irq_data *d)
-{
- void __iomem *reg = VIC_INT_TO_REG_ADDR(VIC_INT_ENCLEAR0, d->irq);
- unsigned index = VIC_INT_TO_REG_INDEX(d->irq);
- uint32_t mask = 1UL << (d->irq & 31);
- int smsm_irq = msm_irq_to_smsm[d->irq];
-
- msm_irq_shadow_reg[index].int_en[0] &= ~mask;
- writel(mask, reg);
- if (smsm_irq == 0)
- msm_irq_idle_disable[index] &= ~mask;
- else {
- mask = 1UL << (smsm_irq - 1);
- msm_irq_smsm_wake_enable[0] &= ~mask;
- }
-}
-
-static void msm_irq_unmask(struct irq_data *d)
-{
- void __iomem *reg = VIC_INT_TO_REG_ADDR(VIC_INT_ENSET0, d->irq);
- unsigned index = VIC_INT_TO_REG_INDEX(d->irq);
- uint32_t mask = 1UL << (d->irq & 31);
- int smsm_irq = msm_irq_to_smsm[d->irq];
-
- msm_irq_shadow_reg[index].int_en[0] |= mask;
- writel(mask, reg);
-
- if (smsm_irq == 0)
- msm_irq_idle_disable[index] |= mask;
- else {
- mask = 1UL << (smsm_irq - 1);
- msm_irq_smsm_wake_enable[0] |= mask;
- }
-}
-
-static int msm_irq_set_wake(struct irq_data *d, unsigned int on)
-{
- unsigned index = VIC_INT_TO_REG_INDEX(d->irq);
- uint32_t mask = 1UL << (d->irq & 31);
- int smsm_irq = msm_irq_to_smsm[d->irq];
-
- if (smsm_irq == 0) {
- printk(KERN_ERR "msm_irq_set_wake: bad wakeup irq %d\n", d->irq);
- return -EINVAL;
- }
- if (on)
- msm_irq_shadow_reg[index].int_en[1] |= mask;
- else
- msm_irq_shadow_reg[index].int_en[1] &= ~mask;
-
- if (smsm_irq == SMSM_FAKE_IRQ)
- return 0;
-
- mask = 1UL << (smsm_irq - 1);
- if (on)
- msm_irq_smsm_wake_enable[1] |= mask;
- else
- msm_irq_smsm_wake_enable[1] &= ~mask;
- return 0;
-}
-
-static int msm_irq_set_type(struct irq_data *d, unsigned int flow_type)
-{
- void __iomem *treg = VIC_INT_TO_REG_ADDR(VIC_INT_TYPE0, d->irq);
- void __iomem *preg = VIC_INT_TO_REG_ADDR(VIC_INT_POLARITY0, d->irq);
- unsigned index = VIC_INT_TO_REG_INDEX(d->irq);
- int b = 1 << (d->irq & 31);
- uint32_t polarity;
- uint32_t type;
-
- polarity = msm_irq_shadow_reg[index].int_polarity;
- if (flow_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW))
- polarity |= b;
- if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_HIGH))
- polarity &= ~b;
- writel(polarity, preg);
- msm_irq_shadow_reg[index].int_polarity = polarity;
-
- type = msm_irq_shadow_reg[index].int_type;
- if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
- type |= b;
- __irq_set_handler_locked(d->irq, handle_edge_irq);
- }
- if (flow_type & (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW)) {
- type &= ~b;
- __irq_set_handler_locked(d->irq, handle_level_irq);
- }
- writel(type, treg);
- msm_irq_shadow_reg[index].int_type = type;
- return 0;
-}
-
-static struct irq_chip msm_irq_chip = {
- .name = "msm",
- .irq_disable = msm_irq_mask,
- .irq_ack = msm_irq_ack,
- .irq_mask = msm_irq_mask,
- .irq_unmask = msm_irq_unmask,
- .irq_set_wake = msm_irq_set_wake,
- .irq_set_type = msm_irq_set_type,
-};
-
-void __init msm_init_irq(void)
-{
- unsigned n;
-
- /* select level interrupts */
- msm_irq_write_all_regs(VIC_INT_TYPE0, 0);
-
- /* select highlevel interrupts */
- msm_irq_write_all_regs(VIC_INT_POLARITY0, 0);
-
- /* select IRQ for all INTs */
- msm_irq_write_all_regs(VIC_INT_SELECT0, 0);
-
- /* disable all INTs */
- msm_irq_write_all_regs(VIC_INT_EN0, 0);
-
- /* don't use vic */
- writel(0, VIC_CONFIG);
-
- /* enable interrupt controller */
- writel(3, VIC_INT_MASTEREN);
-
- for (n = 0; n < NR_MSM_IRQS; n++) {
- irq_set_chip_and_handler(n, &msm_irq_chip, handle_level_irq);
- set_irq_flags(n, IRQF_VALID);
- }
-}
diff --git a/arch/arm/mach-msm/irq.c b/arch/arm/mach-msm/irq.c
deleted file mode 100644
index ea514be390c6..000000000000
--- a/arch/arm/mach-msm/irq.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/* linux/arch/arm/mach-msm/irq.c
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ptrace.h>
-#include <linux/timer.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-#include <mach/msm_iomap.h>
-
-#define VIC_REG(off) (MSM_VIC_BASE + (off))
-
-#define VIC_INT_SELECT0 VIC_REG(0x0000) /* 1: FIQ, 0: IRQ */
-#define VIC_INT_SELECT1 VIC_REG(0x0004) /* 1: FIQ, 0: IRQ */
-#define VIC_INT_EN0 VIC_REG(0x0010)
-#define VIC_INT_EN1 VIC_REG(0x0014)
-#define VIC_INT_ENCLEAR0 VIC_REG(0x0020)
-#define VIC_INT_ENCLEAR1 VIC_REG(0x0024)
-#define VIC_INT_ENSET0 VIC_REG(0x0030)
-#define VIC_INT_ENSET1 VIC_REG(0x0034)
-#define VIC_INT_TYPE0 VIC_REG(0x0040) /* 1: EDGE, 0: LEVEL */
-#define VIC_INT_TYPE1 VIC_REG(0x0044) /* 1: EDGE, 0: LEVEL */
-#define VIC_INT_POLARITY0 VIC_REG(0x0050) /* 1: NEG, 0: POS */
-#define VIC_INT_POLARITY1 VIC_REG(0x0054) /* 1: NEG, 0: POS */
-#define VIC_NO_PEND_VAL VIC_REG(0x0060)
-#define VIC_INT_MASTEREN VIC_REG(0x0064) /* 1: IRQ, 2: FIQ */
-#define VIC_PROTECTION VIC_REG(0x006C) /* 1: ENABLE */
-#define VIC_CONFIG VIC_REG(0x0068) /* 1: USE ARM1136 VIC */
-#define VIC_IRQ_STATUS0 VIC_REG(0x0080)
-#define VIC_IRQ_STATUS1 VIC_REG(0x0084)
-#define VIC_FIQ_STATUS0 VIC_REG(0x0090)
-#define VIC_FIQ_STATUS1 VIC_REG(0x0094)
-#define VIC_RAW_STATUS0 VIC_REG(0x00A0)
-#define VIC_RAW_STATUS1 VIC_REG(0x00A4)
-#define VIC_INT_CLEAR0 VIC_REG(0x00B0)
-#define VIC_INT_CLEAR1 VIC_REG(0x00B4)
-#define VIC_SOFTINT0 VIC_REG(0x00C0)
-#define VIC_SOFTINT1 VIC_REG(0x00C4)
-#define VIC_IRQ_VEC_RD VIC_REG(0x00D0) /* pending int # */
-#define VIC_IRQ_VEC_PEND_RD VIC_REG(0x00D4) /* pending vector addr */
-#define VIC_IRQ_VEC_WR VIC_REG(0x00D8)
-#define VIC_IRQ_IN_SERVICE VIC_REG(0x00E0)
-#define VIC_IRQ_IN_STACK VIC_REG(0x00E4)
-#define VIC_TEST_BUS_SEL VIC_REG(0x00E8)
-
-#define VIC_VECTPRIORITY(n) VIC_REG(0x0200+((n) * 4))
-#define VIC_VECTADDR(n) VIC_REG(0x0400+((n) * 4))
-
-static void msm_irq_ack(struct irq_data *d)
-{
- void __iomem *reg = VIC_INT_CLEAR0 + ((d->irq & 32) ? 4 : 0);
- writel(1 << (d->irq & 31), reg);
-}
-
-static void msm_irq_mask(struct irq_data *d)
-{
- void __iomem *reg = VIC_INT_ENCLEAR0 + ((d->irq & 32) ? 4 : 0);
- writel(1 << (d->irq & 31), reg);
-}
-
-static void msm_irq_unmask(struct irq_data *d)
-{
- void __iomem *reg = VIC_INT_ENSET0 + ((d->irq & 32) ? 4 : 0);
- writel(1 << (d->irq & 31), reg);
-}
-
-static int msm_irq_set_wake(struct irq_data *d, unsigned int on)
-{
- return -EINVAL;
-}
-
-static int msm_irq_set_type(struct irq_data *d, unsigned int flow_type)
-{
- void __iomem *treg = VIC_INT_TYPE0 + ((d->irq & 32) ? 4 : 0);
- void __iomem *preg = VIC_INT_POLARITY0 + ((d->irq & 32) ? 4 : 0);
- int b = 1 << (d->irq & 31);
-
- if (flow_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW))
- writel(readl(preg) | b, preg);
- if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_HIGH))
- writel(readl(preg) & (~b), preg);
-
- if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
- writel(readl(treg) | b, treg);
- __irq_set_handler_locked(d->irq, handle_edge_irq);
- }
- if (flow_type & (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW)) {
- writel(readl(treg) & (~b), treg);
- __irq_set_handler_locked(d->irq, handle_level_irq);
- }
- return 0;
-}
-
-static struct irq_chip msm_irq_chip = {
- .name = "msm",
- .irq_ack = msm_irq_ack,
- .irq_mask = msm_irq_mask,
- .irq_unmask = msm_irq_unmask,
- .irq_set_wake = msm_irq_set_wake,
- .irq_set_type = msm_irq_set_type,
-};
-
-void __init msm_init_irq(void)
-{
- unsigned n;
-
- /* select level interrupts */
- writel(0, VIC_INT_TYPE0);
- writel(0, VIC_INT_TYPE1);
-
- /* select highlevel interrupts */
- writel(0, VIC_INT_POLARITY0);
- writel(0, VIC_INT_POLARITY1);
-
- /* select IRQ for all INTs */
- writel(0, VIC_INT_SELECT0);
- writel(0, VIC_INT_SELECT1);
-
- /* disable all INTs */
- writel(0, VIC_INT_EN0);
- writel(0, VIC_INT_EN1);
-
- /* don't use 1136 vic */
- writel(0, VIC_CONFIG);
-
- /* enable interrupt controller */
- writel(1, VIC_INT_MASTEREN);
-
- for (n = 0; n < NR_MSM_IRQS; n++) {
- irq_set_chip_and_handler(n, &msm_irq_chip, handle_level_irq);
- set_irq_flags(n, IRQF_VALID);
- }
-}
diff --git a/arch/arm/mach-msm/last_radio_log.c b/arch/arm/mach-msm/last_radio_log.c
deleted file mode 100644
index 9c392a29fc7e..000000000000
--- a/arch/arm/mach-msm/last_radio_log.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/* arch/arm/mach-msm/last_radio_log.c
- *
- * Extract the log from a modem crash though SMEM
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/proc_fs.h>
-#include <linux/uaccess.h>
-
-#include "smd_private.h"
-
-static void *radio_log_base;
-static size_t radio_log_size;
-
-extern void *smem_item(unsigned id, unsigned *size);
-
-static ssize_t last_radio_log_read(struct file *file, char __user *buf,
- size_t len, loff_t *offset)
-{
- return simple_read_from_buffer(buf, len, offset,
- radio_log_base, radio_log_size);
-}
-
-static struct file_operations last_radio_log_fops = {
- .read = last_radio_log_read,
- .llseek = default_llseek,
-};
-
-void msm_init_last_radio_log(struct module *owner)
-{
- struct proc_dir_entry *entry;
-
- if (last_radio_log_fops.owner) {
- pr_err("%s: already claimed\n", __func__);
- return;
- }
-
- radio_log_base = smem_item(SMEM_CLKREGIM_BSP, &radio_log_size);
- if (!radio_log_base) {
- pr_err("%s: could not retrieve SMEM_CLKREGIM_BSP\n", __func__);
- return;
- }
-
- entry = proc_create("last_radio_log", S_IRUGO, NULL,
- &last_radio_log_fops);
- if (!entry) {
- pr_err("%s: could not create proc entry for radio log\n",
- __func__);
- return;
- }
-
- pr_err("%s: last radio log is %d bytes long\n", __func__,
- radio_log_size);
- last_radio_log_fops.owner = owner;
- proc_set_size(entry, radio_log_size);
-}
-EXPORT_SYMBOL(msm_init_last_radio_log);
diff --git a/arch/arm/mach-msm/proc_comm.c b/arch/arm/mach-msm/proc_comm.c
deleted file mode 100644
index 507f5ca80697..000000000000
--- a/arch/arm/mach-msm/proc_comm.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/* arch/arm/mach-msm/proc_comm.c
- *
- * Copyright (C) 2007-2008 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <mach/msm_iomap.h>
-
-#include "proc_comm.h"
-
-static inline void msm_a2m_int(uint32_t irq)
-{
-#if defined(CONFIG_ARCH_MSM7X30)
- writel(1 << irq, MSM_GCC_BASE + 0x8);
-#else
- writel(1, MSM_CSR_BASE + 0x400 + (irq * 4));
-#endif
-}
-
-static inline void notify_other_proc_comm(void)
-{
- msm_a2m_int(6);
-}
-
-#define APP_COMMAND 0x00
-#define APP_STATUS 0x04
-#define APP_DATA1 0x08
-#define APP_DATA2 0x0C
-
-#define MDM_COMMAND 0x10
-#define MDM_STATUS 0x14
-#define MDM_DATA1 0x18
-#define MDM_DATA2 0x1C
-
-static DEFINE_SPINLOCK(proc_comm_lock);
-
-/* The higher level SMD support will install this to
- * provide a way to check for and handle modem restart.
- */
-int (*msm_check_for_modem_crash)(void);
-
-/* Poll for a state change, checking for possible
- * modem crashes along the way (so we don't wait
- * forever while the ARM9 is blowing up).
- *
- * Return an error in the event of a modem crash and
- * restart so the msm_proc_comm() routine can restart
- * the operation from the beginning.
- */
-static int proc_comm_wait_for(void __iomem *addr, unsigned value)
-{
- for (;;) {
- if (readl(addr) == value)
- return 0;
-
- if (msm_check_for_modem_crash)
- if (msm_check_for_modem_crash())
- return -EAGAIN;
- }
-}
-
-int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2)
-{
- void __iomem *base = MSM_SHARED_RAM_BASE;
- unsigned long flags;
- int ret;
-
- spin_lock_irqsave(&proc_comm_lock, flags);
-
- for (;;) {
- if (proc_comm_wait_for(base + MDM_STATUS, PCOM_READY))
- continue;
-
- writel(cmd, base + APP_COMMAND);
- writel(data1 ? *data1 : 0, base + APP_DATA1);
- writel(data2 ? *data2 : 0, base + APP_DATA2);
-
- notify_other_proc_comm();
-
- if (proc_comm_wait_for(base + APP_COMMAND, PCOM_CMD_DONE))
- continue;
-
- if (readl(base + APP_STATUS) != PCOM_CMD_FAIL) {
- if (data1)
- *data1 = readl(base + APP_DATA1);
- if (data2)
- *data2 = readl(base + APP_DATA2);
- ret = 0;
- } else {
- ret = -EIO;
- }
- break;
- }
-
- writel(PCOM_CMD_IDLE, base + APP_COMMAND);
-
- spin_unlock_irqrestore(&proc_comm_lock, flags);
-
- return ret;
-}
-
-/*
- * We need to wait for the ARM9 to at least partially boot
- * up before we can continue. Since the ARM9 does resource
- * allocation, if we dont' wait we could end up crashing or in
- * and unknown state. This function should be called early to
- * wait on the ARM9.
- */
-void proc_comm_boot_wait(void)
-{
- void __iomem *base = MSM_SHARED_RAM_BASE;
-
- proc_comm_wait_for(base + MDM_STATUS, PCOM_READY);
-
-}
diff --git a/arch/arm/mach-msm/proc_comm.h b/arch/arm/mach-msm/proc_comm.h
deleted file mode 100644
index e8d043a0e990..000000000000
--- a/arch/arm/mach-msm/proc_comm.h
+++ /dev/null
@@ -1,258 +0,0 @@
-/* arch/arm/mach-msm/proc_comm.h
- *
- * Copyright (c) 2007 QUALCOMM Incorporated
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _ARCH_ARM_MACH_MSM_PROC_COMM_H_
-#define _ARCH_ARM_MACH_MSM_PROC_COMM_H_
-
-#include <linux/init.h>
-
-enum {
- PCOM_CMD_IDLE = 0x0,
- PCOM_CMD_DONE,
- PCOM_RESET_APPS,
- PCOM_RESET_CHIP,
- PCOM_CONFIG_NAND_MPU,
- PCOM_CONFIG_USB_CLKS,
- PCOM_GET_POWER_ON_STATUS,
- PCOM_GET_WAKE_UP_STATUS,
- PCOM_GET_BATT_LEVEL,
- PCOM_CHG_IS_CHARGING,
- PCOM_POWER_DOWN,
- PCOM_USB_PIN_CONFIG,
- PCOM_USB_PIN_SEL,
- PCOM_SET_RTC_ALARM,
- PCOM_NV_READ,
- PCOM_NV_WRITE,
- PCOM_GET_UUID_HIGH,
- PCOM_GET_UUID_LOW,
- PCOM_GET_HW_ENTROPY,
- PCOM_RPC_GPIO_TLMM_CONFIG_REMOTE,
- PCOM_CLKCTL_RPC_ENABLE,
- PCOM_CLKCTL_RPC_DISABLE,
- PCOM_CLKCTL_RPC_RESET,
- PCOM_CLKCTL_RPC_SET_FLAGS,
- PCOM_CLKCTL_RPC_SET_RATE,
- PCOM_CLKCTL_RPC_MIN_RATE,
- PCOM_CLKCTL_RPC_MAX_RATE,
- PCOM_CLKCTL_RPC_RATE,
- PCOM_CLKCTL_RPC_PLL_REQUEST,
- PCOM_CLKCTL_RPC_ENABLED,
- PCOM_VREG_SWITCH,
- PCOM_VREG_SET_LEVEL,
- PCOM_GPIO_TLMM_CONFIG_GROUP,
- PCOM_GPIO_TLMM_UNCONFIG_GROUP,
- PCOM_NV_WRITE_BYTES_4_7,
- PCOM_CONFIG_DISP,
- PCOM_GET_FTM_BOOT_COUNT,
- PCOM_RPC_GPIO_TLMM_CONFIG_EX,
- PCOM_PM_MPP_CONFIG,
- PCOM_GPIO_IN,
- PCOM_GPIO_OUT,
- PCOM_RESET_MODEM,
- PCOM_RESET_CHIP_IMM,
- PCOM_PM_VID_EN,
- PCOM_VREG_PULLDOWN,
- PCOM_GET_MODEM_VERSION,
- PCOM_CLK_REGIME_SEC_RESET,
- PCOM_CLK_REGIME_SEC_RESET_ASSERT,
- PCOM_CLK_REGIME_SEC_RESET_DEASSERT,
- PCOM_CLK_REGIME_SEC_PLL_REQUEST_WRP,
- PCOM_CLK_REGIME_SEC_ENABLE,
- PCOM_CLK_REGIME_SEC_DISABLE,
- PCOM_CLK_REGIME_SEC_IS_ON,
- PCOM_CLK_REGIME_SEC_SEL_CLK_INV,
- PCOM_CLK_REGIME_SEC_SEL_CLK_SRC,
- PCOM_CLK_REGIME_SEC_SEL_CLK_DIV,
- PCOM_CLK_REGIME_SEC_ICODEC_CLK_ENABLE,
- PCOM_CLK_REGIME_SEC_ICODEC_CLK_DISABLE,
- PCOM_CLK_REGIME_SEC_SEL_SPEED,
- PCOM_CLK_REGIME_SEC_CONFIG_GP_CLK_WRP,
- PCOM_CLK_REGIME_SEC_CONFIG_MDH_CLK_WRP,
- PCOM_CLK_REGIME_SEC_USB_XTAL_ON,
- PCOM_CLK_REGIME_SEC_USB_XTAL_OFF,
- PCOM_CLK_REGIME_SEC_SET_QDSP_DME_MODE,
- PCOM_CLK_REGIME_SEC_SWITCH_ADSP_CLK,
- PCOM_CLK_REGIME_SEC_GET_MAX_ADSP_CLK_KHZ,
- PCOM_CLK_REGIME_SEC_GET_I2C_CLK_KHZ,
- PCOM_CLK_REGIME_SEC_MSM_GET_CLK_FREQ_KHZ,
- PCOM_CLK_REGIME_SEC_SEL_VFE_SRC,
- PCOM_CLK_REGIME_SEC_MSM_SEL_CAMCLK,
- PCOM_CLK_REGIME_SEC_MSM_SEL_LCDCLK,
- PCOM_CLK_REGIME_SEC_VFE_RAIL_OFF,
- PCOM_CLK_REGIME_SEC_VFE_RAIL_ON,
- PCOM_CLK_REGIME_SEC_GRP_RAIL_OFF,
- PCOM_CLK_REGIME_SEC_GRP_RAIL_ON,
- PCOM_CLK_REGIME_SEC_VDC_RAIL_OFF,
- PCOM_CLK_REGIME_SEC_VDC_RAIL_ON,
- PCOM_CLK_REGIME_SEC_LCD_CTRL,
- PCOM_CLK_REGIME_SEC_REGISTER_FOR_CPU_RESOURCE,
- PCOM_CLK_REGIME_SEC_DEREGISTER_FOR_CPU_RESOURCE,
- PCOM_CLK_REGIME_SEC_RESOURCE_REQUEST_WRP,
- PCOM_CLK_REGIME_MSM_SEC_SEL_CLK_OWNER,
- PCOM_CLK_REGIME_SEC_DEVMAN_REQUEST_WRP,
- PCOM_GPIO_CONFIG,
- PCOM_GPIO_CONFIGURE_GROUP,
- PCOM_GPIO_TLMM_SET_PORT,
- PCOM_GPIO_TLMM_CONFIG_EX,
- PCOM_SET_FTM_BOOT_COUNT,
- PCOM_RESERVED0,
- PCOM_RESERVED1,
- PCOM_CUSTOMER_CMD1,
- PCOM_CUSTOMER_CMD2,
- PCOM_CUSTOMER_CMD3,
- PCOM_CLK_REGIME_ENTER_APPSBL_CHG_MODE,
- PCOM_CLK_REGIME_EXIT_APPSBL_CHG_MODE,
- PCOM_CLK_REGIME_SEC_RAIL_DISABLE,
- PCOM_CLK_REGIME_SEC_RAIL_ENABLE,
- PCOM_CLK_REGIME_SEC_RAIL_CONTROL,
- PCOM_SET_SW_WATCHDOG_STATE,
- PCOM_PM_MPP_CONFIG_DIGITAL_INPUT,
- PCOM_PM_MPP_CONFIG_I_SINK,
- PCOM_RESERVED_101,
- PCOM_MSM_HSUSB_PHY_RESET,
- PCOM_GET_BATT_MV_LEVEL,
- PCOM_CHG_USB_IS_PC_CONNECTED,
- PCOM_CHG_USB_IS_CHARGER_CONNECTED,
- PCOM_CHG_USB_IS_DISCONNECTED,
- PCOM_CHG_USB_IS_AVAILABLE,
- PCOM_CLK_REGIME_SEC_MSM_SEL_FREQ,
- PCOM_CLK_REGIME_SEC_SET_PCLK_AXI_POLICY,
- PCOM_CLKCTL_RPC_RESET_ASSERT,
- PCOM_CLKCTL_RPC_RESET_DEASSERT,
- PCOM_CLKCTL_RPC_RAIL_ON,
- PCOM_CLKCTL_RPC_RAIL_OFF,
- PCOM_CLKCTL_RPC_RAIL_ENABLE,
- PCOM_CLKCTL_RPC_RAIL_DISABLE,
- PCOM_CLKCTL_RPC_RAIL_CONTROL,
- PCOM_CLKCTL_RPC_MIN_MSMC1,
- PCOM_NUM_CMDS,
-};
-
-enum {
- PCOM_INVALID_STATUS = 0x0,
- PCOM_READY,
- PCOM_CMD_RUNNING,
- PCOM_CMD_SUCCESS,
- PCOM_CMD_FAIL,
- PCOM_CMD_FAIL_FALSE_RETURNED,
- PCOM_CMD_FAIL_CMD_OUT_OF_BOUNDS_SERVER,
- PCOM_CMD_FAIL_CMD_OUT_OF_BOUNDS_CLIENT,
- PCOM_CMD_FAIL_CMD_UNREGISTERED,
- PCOM_CMD_FAIL_CMD_LOCKED,
- PCOM_CMD_FAIL_SERVER_NOT_YET_READY,
- PCOM_CMD_FAIL_BAD_DESTINATION,
- PCOM_CMD_FAIL_SERVER_RESET,
- PCOM_CMD_FAIL_SMSM_NOT_INIT,
- PCOM_CMD_FAIL_PROC_COMM_BUSY,
- PCOM_CMD_FAIL_PROC_COMM_NOT_INIT,
-
-};
-
-/* List of VREGs that support the Pull Down Resistor setting. */
-enum vreg_pdown_id {
- PM_VREG_PDOWN_MSMA_ID,
- PM_VREG_PDOWN_MSMP_ID,
- PM_VREG_PDOWN_MSME1_ID, /* Not supported in Panoramix */
- PM_VREG_PDOWN_MSMC1_ID, /* Not supported in PM6620 */
- PM_VREG_PDOWN_MSMC2_ID, /* Supported in PM7500 only */
- PM_VREG_PDOWN_GP3_ID, /* Supported in PM7500 only */
- PM_VREG_PDOWN_MSME2_ID, /* Supported in PM7500 and Panoramix only */
- PM_VREG_PDOWN_GP4_ID, /* Supported in PM7500 only */
- PM_VREG_PDOWN_GP1_ID, /* Supported in PM7500 only */
- PM_VREG_PDOWN_TCXO_ID,
- PM_VREG_PDOWN_PA_ID,
- PM_VREG_PDOWN_RFTX_ID,
- PM_VREG_PDOWN_RFRX1_ID,
- PM_VREG_PDOWN_RFRX2_ID,
- PM_VREG_PDOWN_SYNT_ID,
- PM_VREG_PDOWN_WLAN_ID,
- PM_VREG_PDOWN_USB_ID,
- PM_VREG_PDOWN_MMC_ID,
- PM_VREG_PDOWN_RUIM_ID,
- PM_VREG_PDOWN_MSMC0_ID, /* Supported in PM6610 only */
- PM_VREG_PDOWN_GP2_ID, /* Supported in PM7500 only */
- PM_VREG_PDOWN_GP5_ID, /* Supported in PM7500 only */
- PM_VREG_PDOWN_GP6_ID, /* Supported in PM7500 only */
- PM_VREG_PDOWN_RF_ID,
- PM_VREG_PDOWN_RF_VCO_ID,
- PM_VREG_PDOWN_MPLL_ID,
- PM_VREG_PDOWN_S2_ID,
- PM_VREG_PDOWN_S3_ID,
- PM_VREG_PDOWN_RFUBM_ID,
-
- /* new for HAN */
- PM_VREG_PDOWN_RF1_ID,
- PM_VREG_PDOWN_RF2_ID,
- PM_VREG_PDOWN_RFA_ID,
- PM_VREG_PDOWN_CDC2_ID,
- PM_VREG_PDOWN_RFTX2_ID,
- PM_VREG_PDOWN_USIM_ID,
- PM_VREG_PDOWN_USB2P6_ID,
- PM_VREG_PDOWN_USB3P3_ID,
- PM_VREG_PDOWN_INVALID_ID,
-
- /* backward compatible enums only */
- PM_VREG_PDOWN_CAM_ID = PM_VREG_PDOWN_GP1_ID,
- PM_VREG_PDOWN_MDDI_ID = PM_VREG_PDOWN_GP2_ID,
- PM_VREG_PDOWN_RUIM2_ID = PM_VREG_PDOWN_GP3_ID,
- PM_VREG_PDOWN_AUX_ID = PM_VREG_PDOWN_GP4_ID,
- PM_VREG_PDOWN_AUX2_ID = PM_VREG_PDOWN_GP5_ID,
- PM_VREG_PDOWN_BT_ID = PM_VREG_PDOWN_GP6_ID,
-
- PM_VREG_PDOWN_MSME_ID = PM_VREG_PDOWN_MSME1_ID,
- PM_VREG_PDOWN_MSMC_ID = PM_VREG_PDOWN_MSMC1_ID,
- PM_VREG_PDOWN_RFA1_ID = PM_VREG_PDOWN_RFRX2_ID,
- PM_VREG_PDOWN_RFA2_ID = PM_VREG_PDOWN_RFTX2_ID,
- PM_VREG_PDOWN_XO_ID = PM_VREG_PDOWN_TCXO_ID
-};
-
-enum {
- PCOM_CLKRGM_APPS_RESET_USB_PHY = 34,
- PCOM_CLKRGM_APPS_RESET_USBH = 37,
-};
-
-/* gpio info for PCOM_RPC_GPIO_TLMM_CONFIG_EX */
-
-#define GPIO_ENABLE 0
-#define GPIO_DISABLE 1
-
-#define GPIO_INPUT 0
-#define GPIO_OUTPUT 1
-
-#define GPIO_NO_PULL 0
-#define GPIO_PULL_DOWN 1
-#define GPIO_KEEPER 2
-#define GPIO_PULL_UP 3
-
-#define GPIO_2MA 0
-#define GPIO_4MA 1
-#define GPIO_6MA 2
-#define GPIO_8MA 3
-#define GPIO_10MA 4
-#define GPIO_12MA 5
-#define GPIO_14MA 6
-#define GPIO_16MA 7
-
-#define PCOM_GPIO_CFG(gpio, func, dir, pull, drvstr) \
- ((((gpio) & 0x3FF) << 4) | \
- ((func) & 0xf) | \
- (((dir) & 0x1) << 14) | \
- (((pull) & 0x3) << 15) | \
- (((drvstr) & 0xF) << 17))
-
-int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2);
-void proc_comm_boot_wait(void);
-
-#endif
diff --git a/arch/arm/mach-msm/sirc.c b/arch/arm/mach-msm/sirc.c
deleted file mode 100644
index 689e78c95f38..000000000000
--- a/arch/arm/mach-msm/sirc.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- */
-
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <asm/irq.h>
-
-static unsigned int int_enable;
-static unsigned int wake_enable;
-
-static struct sirc_regs_t sirc_regs = {
- .int_enable = SPSS_SIRC_INT_ENABLE,
- .int_enable_clear = SPSS_SIRC_INT_ENABLE_CLEAR,
- .int_enable_set = SPSS_SIRC_INT_ENABLE_SET,
- .int_type = SPSS_SIRC_INT_TYPE,
- .int_polarity = SPSS_SIRC_INT_POLARITY,
- .int_clear = SPSS_SIRC_INT_CLEAR,
-};
-
-static struct sirc_cascade_regs sirc_reg_table[] = {
- {
- .int_status = SPSS_SIRC_IRQ_STATUS,
- .cascade_irq = INT_SIRC_0,
- }
-};
-
-/* Mask off the given interrupt. Keep the int_enable mask in sync with
- the enable reg, so it can be restored after power collapse. */
-static void sirc_irq_mask(struct irq_data *d)
-{
- unsigned int mask;
-
- mask = 1 << (d->irq - FIRST_SIRC_IRQ);
- writel(mask, sirc_regs.int_enable_clear);
- int_enable &= ~mask;
- return;
-}
-
-/* Unmask the given interrupt. Keep the int_enable mask in sync with
- the enable reg, so it can be restored after power collapse. */
-static void sirc_irq_unmask(struct irq_data *d)
-{
- unsigned int mask;
-
- mask = 1 << (d->irq - FIRST_SIRC_IRQ);
- writel(mask, sirc_regs.int_enable_set);
- int_enable |= mask;
- return;
-}
-
-static void sirc_irq_ack(struct irq_data *d)
-{
- unsigned int mask;
-
- mask = 1 << (d->irq - FIRST_SIRC_IRQ);
- writel(mask, sirc_regs.int_clear);
- return;
-}
-
-static int sirc_irq_set_wake(struct irq_data *d, unsigned int on)
-{
- unsigned int mask;
-
- /* Used to set the interrupt enable mask during power collapse. */
- mask = 1 << (d->irq - FIRST_SIRC_IRQ);
- if (on)
- wake_enable |= mask;
- else
- wake_enable &= ~mask;
-
- return 0;
-}
-
-static int sirc_irq_set_type(struct irq_data *d, unsigned int flow_type)
-{
- unsigned int mask;
- unsigned int val;
-
- mask = 1 << (d->irq - FIRST_SIRC_IRQ);
- val = readl(sirc_regs.int_polarity);
-
- if (flow_type & (IRQF_TRIGGER_LOW | IRQF_TRIGGER_FALLING))
- val |= mask;
- else
- val &= ~mask;
-
- writel(val, sirc_regs.int_polarity);
-
- val = readl(sirc_regs.int_type);
- if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
- val |= mask;
- __irq_set_handler_locked(d->irq, handle_edge_irq);
- } else {
- val &= ~mask;
- __irq_set_handler_locked(d->irq, handle_level_irq);
- }
-
- writel(val, sirc_regs.int_type);
-
- return 0;
-}
-
-/* Finds the pending interrupt on the passed cascade irq and redrives it */
-static void sirc_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- unsigned int reg = 0;
- unsigned int sirq;
- unsigned int status;
-
- while ((reg < ARRAY_SIZE(sirc_reg_table)) &&
- (sirc_reg_table[reg].cascade_irq != irq))
- reg++;
-
- status = readl(sirc_reg_table[reg].int_status);
- status &= SIRC_MASK;
- if (status == 0)
- return;
-
- for (sirq = 0;
- (sirq < NR_SIRC_IRQS) && ((status & (1U << sirq)) == 0);
- sirq++)
- ;
- generic_handle_irq(sirq+FIRST_SIRC_IRQ);
-
- desc->irq_data.chip->irq_ack(&desc->irq_data);
-}
-
-static struct irq_chip sirc_irq_chip = {
- .name = "sirc",
- .irq_ack = sirc_irq_ack,
- .irq_mask = sirc_irq_mask,
- .irq_unmask = sirc_irq_unmask,
- .irq_set_wake = sirc_irq_set_wake,
- .irq_set_type = sirc_irq_set_type,
-};
-
-void __init msm_init_sirc(void)
-{
- int i;
-
- int_enable = 0;
- wake_enable = 0;
-
- for (i = FIRST_SIRC_IRQ; i < LAST_SIRC_IRQ; i++) {
- irq_set_chip_and_handler(i, &sirc_irq_chip, handle_edge_irq);
- set_irq_flags(i, IRQF_VALID);
- }
-
- for (i = 0; i < ARRAY_SIZE(sirc_reg_table); i++) {
- irq_set_chained_handler(sirc_reg_table[i].cascade_irq,
- sirc_irq_handler);
- irq_set_irq_wake(sirc_reg_table[i].cascade_irq, 1);
- }
- return;
-}
-
diff --git a/arch/arm/mach-msm/smd.c b/arch/arm/mach-msm/smd.c
deleted file mode 100644
index 7550f5a08956..000000000000
--- a/arch/arm/mach-msm/smd.c
+++ /dev/null
@@ -1,1034 +0,0 @@
-/* arch/arm/mach-msm/smd.c
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/cdev.h>
-#include <linux/device.h>
-#include <linux/wait.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/list.h>
-#include <linux/slab.h>
-#include <linux/debugfs.h>
-#include <linux/delay.h>
-
-#include <mach/msm_smd.h>
-
-#include "smd_private.h"
-#include "proc_comm.h"
-
-#if defined(CONFIG_ARCH_QSD8X50)
-#define CONFIG_QDSP6 1
-#endif
-
-#define MODULE_NAME "msm_smd"
-
-enum {
- MSM_SMD_DEBUG = 1U << 0,
- MSM_SMSM_DEBUG = 1U << 0,
-};
-
-static int msm_smd_debug_mask;
-
-struct shared_info {
- int ready;
- void __iomem *state;
-};
-
-static unsigned dummy_state[SMSM_STATE_COUNT];
-
-static struct shared_info smd_info = {
- /* FIXME: not a real __iomem pointer */
- .state = &dummy_state,
-};
-
-module_param_named(debug_mask, msm_smd_debug_mask,
- int, S_IRUGO | S_IWUSR | S_IWGRP);
-
-static unsigned last_heap_free = 0xffffffff;
-
-static inline void notify_other_smsm(void)
-{
- msm_a2m_int(5);
-#ifdef CONFIG_QDSP6
- msm_a2m_int(8);
-#endif
-}
-
-static inline void notify_modem_smd(void)
-{
- msm_a2m_int(0);
-}
-
-static inline void notify_dsp_smd(void)
-{
- msm_a2m_int(8);
-}
-
-static void smd_diag(void)
-{
- char *x;
-
- x = smem_find(ID_DIAG_ERR_MSG, SZ_DIAG_ERR_MSG);
- if (x != 0) {
- x[SZ_DIAG_ERR_MSG - 1] = 0;
- pr_debug("DIAG '%s'\n", x);
- }
-}
-
-/* call when SMSM_RESET flag is set in the A9's smsm_state */
-static void handle_modem_crash(void)
-{
- pr_err("ARM9 has CRASHED\n");
- smd_diag();
-
- /* in this case the modem or watchdog should reboot us */
- for (;;)
- ;
-}
-
-uint32_t raw_smsm_get_state(enum smsm_state_item item)
-{
- return readl(smd_info.state + item * 4);
-}
-
-static int check_for_modem_crash(void)
-{
- if (raw_smsm_get_state(SMSM_STATE_MODEM) & SMSM_RESET) {
- handle_modem_crash();
- return -1;
- }
- return 0;
-}
-
-/* the spinlock is used to synchronize between the
- * irq handler and code that mutates the channel
- * list or fiddles with channel state
- */
-DEFINE_SPINLOCK(smd_lock);
-DEFINE_SPINLOCK(smem_lock);
-
-/* the mutex is used during open() and close()
- * operations to avoid races while creating or
- * destroying smd_channel structures
- */
-static DEFINE_MUTEX(smd_creation_mutex);
-
-static int smd_initialized;
-
-LIST_HEAD(smd_ch_closed_list);
-LIST_HEAD(smd_ch_list_modem);
-LIST_HEAD(smd_ch_list_dsp);
-
-static unsigned char smd_ch_allocated[64];
-static struct work_struct probe_work;
-
-/* how many bytes are available for reading */
-static int smd_stream_read_avail(struct smd_channel *ch)
-{
- return (ch->recv->head - ch->recv->tail) & ch->fifo_mask;
-}
-
-/* how many bytes we are free to write */
-static int smd_stream_write_avail(struct smd_channel *ch)
-{
- return ch->fifo_mask -
- ((ch->send->head - ch->send->tail) & ch->fifo_mask);
-}
-
-static int smd_packet_read_avail(struct smd_channel *ch)
-{
- if (ch->current_packet) {
- int n = smd_stream_read_avail(ch);
- if (n > ch->current_packet)
- n = ch->current_packet;
- return n;
- } else {
- return 0;
- }
-}
-
-static int smd_packet_write_avail(struct smd_channel *ch)
-{
- int n = smd_stream_write_avail(ch);
- return n > SMD_HEADER_SIZE ? n - SMD_HEADER_SIZE : 0;
-}
-
-static int ch_is_open(struct smd_channel *ch)
-{
- return (ch->recv->state == SMD_SS_OPENED) &&
- (ch->send->state == SMD_SS_OPENED);
-}
-
-/* provide a pointer and length to readable data in the fifo */
-static unsigned ch_read_buffer(struct smd_channel *ch, void **ptr)
-{
- unsigned head = ch->recv->head;
- unsigned tail = ch->recv->tail;
- *ptr = (void *) (ch->recv_data + tail);
-
- if (tail <= head)
- return head - tail;
- else
- return ch->fifo_size - tail;
-}
-
-/* advance the fifo read pointer after data from ch_read_buffer is consumed */
-static void ch_read_done(struct smd_channel *ch, unsigned count)
-{
- BUG_ON(count > smd_stream_read_avail(ch));
- ch->recv->tail = (ch->recv->tail + count) & ch->fifo_mask;
- ch->send->fTAIL = 1;
-}
-
-/* basic read interface to ch_read_{buffer,done} used
- * by smd_*_read() and update_packet_state()
- * will read-and-discard if the _data pointer is null
- */
-static int ch_read(struct smd_channel *ch, void *_data, int len)
-{
- void *ptr;
- unsigned n;
- unsigned char *data = _data;
- int orig_len = len;
-
- while (len > 0) {
- n = ch_read_buffer(ch, &ptr);
- if (n == 0)
- break;
-
- if (n > len)
- n = len;
- if (_data)
- memcpy(data, ptr, n);
-
- data += n;
- len -= n;
- ch_read_done(ch, n);
- }
-
- return orig_len - len;
-}
-
-static void update_stream_state(struct smd_channel *ch)
-{
- /* streams have no special state requiring updating */
-}
-
-static void update_packet_state(struct smd_channel *ch)
-{
- unsigned hdr[5];
- int r;
-
- /* can't do anything if we're in the middle of a packet */
- if (ch->current_packet != 0)
- return;
-
- /* don't bother unless we can get the full header */
- if (smd_stream_read_avail(ch) < SMD_HEADER_SIZE)
- return;
-
- r = ch_read(ch, hdr, SMD_HEADER_SIZE);
- BUG_ON(r != SMD_HEADER_SIZE);
-
- ch->current_packet = hdr[0];
-}
-
-/* provide a pointer and length to next free space in the fifo */
-static unsigned ch_write_buffer(struct smd_channel *ch, void **ptr)
-{
- unsigned head = ch->send->head;
- unsigned tail = ch->send->tail;
- *ptr = (void *) (ch->send_data + head);
-
- if (head < tail) {
- return tail - head - 1;
- } else {
- if (tail == 0)
- return ch->fifo_size - head - 1;
- else
- return ch->fifo_size - head;
- }
-}
-
-/* advace the fifo write pointer after freespace
- * from ch_write_buffer is filled
- */
-static void ch_write_done(struct smd_channel *ch, unsigned count)
-{
- BUG_ON(count > smd_stream_write_avail(ch));
- ch->send->head = (ch->send->head + count) & ch->fifo_mask;
- ch->send->fHEAD = 1;
-}
-
-static void ch_set_state(struct smd_channel *ch, unsigned n)
-{
- if (n == SMD_SS_OPENED) {
- ch->send->fDSR = 1;
- ch->send->fCTS = 1;
- ch->send->fCD = 1;
- } else {
- ch->send->fDSR = 0;
- ch->send->fCTS = 0;
- ch->send->fCD = 0;
- }
- ch->send->state = n;
- ch->send->fSTATE = 1;
- ch->notify_other_cpu();
-}
-
-static void do_smd_probe(void)
-{
- struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE;
- if (shared->heap_info.free_offset != last_heap_free) {
- last_heap_free = shared->heap_info.free_offset;
- schedule_work(&probe_work);
- }
-}
-
-static void smd_state_change(struct smd_channel *ch,
- unsigned last, unsigned next)
-{
- ch->last_state = next;
-
- pr_debug("ch %d %d -> %d\n", ch->n, last, next);
-
- switch (next) {
- case SMD_SS_OPENING:
- ch->recv->tail = 0;
- case SMD_SS_OPENED:
- if (ch->send->state != SMD_SS_OPENED)
- ch_set_state(ch, SMD_SS_OPENED);
- ch->notify(ch->priv, SMD_EVENT_OPEN);
- break;
- case SMD_SS_FLUSHING:
- case SMD_SS_RESET:
- /* we should force them to close? */
- default:
- ch->notify(ch->priv, SMD_EVENT_CLOSE);
- }
-}
-
-static void handle_smd_irq(struct list_head *list, void (*notify)(void))
-{
- unsigned long flags;
- struct smd_channel *ch;
- int do_notify = 0;
- unsigned ch_flags;
- unsigned tmp;
-
- spin_lock_irqsave(&smd_lock, flags);
- list_for_each_entry(ch, list, ch_list) {
- ch_flags = 0;
- if (ch_is_open(ch)) {
- if (ch->recv->fHEAD) {
- ch->recv->fHEAD = 0;
- ch_flags |= 1;
- do_notify |= 1;
- }
- if (ch->recv->fTAIL) {
- ch->recv->fTAIL = 0;
- ch_flags |= 2;
- do_notify |= 1;
- }
- if (ch->recv->fSTATE) {
- ch->recv->fSTATE = 0;
- ch_flags |= 4;
- do_notify |= 1;
- }
- }
- tmp = ch->recv->state;
- if (tmp != ch->last_state)
- smd_state_change(ch, ch->last_state, tmp);
- if (ch_flags) {
- ch->update_state(ch);
- ch->notify(ch->priv, SMD_EVENT_DATA);
- }
- }
- if (do_notify)
- notify();
- spin_unlock_irqrestore(&smd_lock, flags);
- do_smd_probe();
-}
-
-static irqreturn_t smd_modem_irq_handler(int irq, void *data)
-{
- handle_smd_irq(&smd_ch_list_modem, notify_modem_smd);
- return IRQ_HANDLED;
-}
-
-#if defined(CONFIG_QDSP6)
-static irqreturn_t smd_dsp_irq_handler(int irq, void *data)
-{
- handle_smd_irq(&smd_ch_list_dsp, notify_dsp_smd);
- return IRQ_HANDLED;
-}
-#endif
-
-static void smd_fake_irq_handler(unsigned long arg)
-{
- handle_smd_irq(&smd_ch_list_modem, notify_modem_smd);
- handle_smd_irq(&smd_ch_list_dsp, notify_dsp_smd);
-}
-
-static DECLARE_TASKLET(smd_fake_irq_tasklet, smd_fake_irq_handler, 0);
-
-static inline int smd_need_int(struct smd_channel *ch)
-{
- if (ch_is_open(ch)) {
- if (ch->recv->fHEAD || ch->recv->fTAIL || ch->recv->fSTATE)
- return 1;
- if (ch->recv->state != ch->last_state)
- return 1;
- }
- return 0;
-}
-
-void smd_sleep_exit(void)
-{
- unsigned long flags;
- struct smd_channel *ch;
- int need_int = 0;
-
- spin_lock_irqsave(&smd_lock, flags);
- list_for_each_entry(ch, &smd_ch_list_modem, ch_list) {
- if (smd_need_int(ch)) {
- need_int = 1;
- break;
- }
- }
- list_for_each_entry(ch, &smd_ch_list_dsp, ch_list) {
- if (smd_need_int(ch)) {
- need_int = 1;
- break;
- }
- }
- spin_unlock_irqrestore(&smd_lock, flags);
- do_smd_probe();
-
- if (need_int) {
- if (msm_smd_debug_mask & MSM_SMD_DEBUG)
- pr_info("smd_sleep_exit need interrupt\n");
- tasklet_schedule(&smd_fake_irq_tasklet);
- }
-}
-
-
-void smd_kick(smd_channel_t *ch)
-{
- unsigned long flags;
- unsigned tmp;
-
- spin_lock_irqsave(&smd_lock, flags);
- ch->update_state(ch);
- tmp = ch->recv->state;
- if (tmp != ch->last_state) {
- ch->last_state = tmp;
- if (tmp == SMD_SS_OPENED)
- ch->notify(ch->priv, SMD_EVENT_OPEN);
- else
- ch->notify(ch->priv, SMD_EVENT_CLOSE);
- }
- ch->notify(ch->priv, SMD_EVENT_DATA);
- ch->notify_other_cpu();
- spin_unlock_irqrestore(&smd_lock, flags);
-}
-
-static int smd_is_packet(int chn, unsigned type)
-{
- type &= SMD_KIND_MASK;
- if (type == SMD_KIND_PACKET)
- return 1;
- if (type == SMD_KIND_STREAM)
- return 0;
-
- /* older AMSS reports SMD_KIND_UNKNOWN always */
- if ((chn > 4) || (chn == 1))
- return 1;
- else
- return 0;
-}
-
-static int smd_stream_write(smd_channel_t *ch, const void *_data, int len)
-{
- void *ptr;
- const unsigned char *buf = _data;
- unsigned xfer;
- int orig_len = len;
-
- if (len < 0)
- return -EINVAL;
-
- while ((xfer = ch_write_buffer(ch, &ptr)) != 0) {
- if (!ch_is_open(ch))
- break;
- if (xfer > len)
- xfer = len;
- memcpy(ptr, buf, xfer);
- ch_write_done(ch, xfer);
- len -= xfer;
- buf += xfer;
- if (len == 0)
- break;
- }
-
- ch->notify_other_cpu();
-
- return orig_len - len;
-}
-
-static int smd_packet_write(smd_channel_t *ch, const void *_data, int len)
-{
- unsigned hdr[5];
-
- if (len < 0)
- return -EINVAL;
-
- if (smd_stream_write_avail(ch) < (len + SMD_HEADER_SIZE))
- return -ENOMEM;
-
- hdr[0] = len;
- hdr[1] = hdr[2] = hdr[3] = hdr[4] = 0;
-
- smd_stream_write(ch, hdr, sizeof(hdr));
- smd_stream_write(ch, _data, len);
-
- return len;
-}
-
-static int smd_stream_read(smd_channel_t *ch, void *data, int len)
-{
- int r;
-
- if (len < 0)
- return -EINVAL;
-
- r = ch_read(ch, data, len);
- if (r > 0)
- ch->notify_other_cpu();
-
- return r;
-}
-
-static int smd_packet_read(smd_channel_t *ch, void *data, int len)
-{
- unsigned long flags;
- int r;
-
- if (len < 0)
- return -EINVAL;
-
- if (len > ch->current_packet)
- len = ch->current_packet;
-
- r = ch_read(ch, data, len);
- if (r > 0)
- ch->notify_other_cpu();
-
- spin_lock_irqsave(&smd_lock, flags);
- ch->current_packet -= r;
- update_packet_state(ch);
- spin_unlock_irqrestore(&smd_lock, flags);
-
- return r;
-}
-
-static int smd_alloc_channel(const char *name, uint32_t cid, uint32_t type)
-{
- struct smd_channel *ch;
-
- ch = kzalloc(sizeof(struct smd_channel), GFP_KERNEL);
- if (ch == 0) {
- pr_err("smd_alloc_channel() out of memory\n");
- return -1;
- }
- ch->n = cid;
-
- if (_smd_alloc_channel(ch)) {
- kfree(ch);
- return -1;
- }
-
- ch->fifo_mask = ch->fifo_size - 1;
- ch->type = type;
-
- if ((type & SMD_TYPE_MASK) == SMD_TYPE_APPS_MODEM)
- ch->notify_other_cpu = notify_modem_smd;
- else
- ch->notify_other_cpu = notify_dsp_smd;
-
- if (smd_is_packet(cid, type)) {
- ch->read = smd_packet_read;
- ch->write = smd_packet_write;
- ch->read_avail = smd_packet_read_avail;
- ch->write_avail = smd_packet_write_avail;
- ch->update_state = update_packet_state;
- } else {
- ch->read = smd_stream_read;
- ch->write = smd_stream_write;
- ch->read_avail = smd_stream_read_avail;
- ch->write_avail = smd_stream_write_avail;
- ch->update_state = update_stream_state;
- }
-
- if ((type & 0xff) == 0)
- memcpy(ch->name, "SMD_", 4);
- else
- memcpy(ch->name, "DSP_", 4);
- memcpy(ch->name + 4, name, 20);
- ch->name[23] = 0;
- ch->pdev.name = ch->name;
- ch->pdev.id = -1;
-
- pr_debug("smd_alloc_channel() cid=%02d size=%05d '%s'\n",
- ch->n, ch->fifo_size, ch->name);
-
- mutex_lock(&smd_creation_mutex);
- list_add(&ch->ch_list, &smd_ch_closed_list);
- mutex_unlock(&smd_creation_mutex);
-
- platform_device_register(&ch->pdev);
- return 0;
-}
-
-static void smd_channel_probe_worker(struct work_struct *work)
-{
- struct smd_alloc_elm *shared;
- unsigned ctype;
- unsigned type;
- unsigned n;
-
- shared = smem_find(ID_CH_ALLOC_TBL, sizeof(*shared) * 64);
- if (!shared) {
- pr_err("cannot find allocation table\n");
- return;
- }
- for (n = 0; n < 64; n++) {
- if (smd_ch_allocated[n])
- continue;
- if (!shared[n].ref_count)
- continue;
- if (!shared[n].name[0])
- continue;
- ctype = shared[n].ctype;
- type = ctype & SMD_TYPE_MASK;
-
- /* DAL channels are stream but neither the modem,
- * nor the DSP correctly indicate this. Fixup manually.
- */
- if (!memcmp(shared[n].name, "DAL", 3))
- ctype = (ctype & (~SMD_KIND_MASK)) | SMD_KIND_STREAM;
-
- type = shared[n].ctype & SMD_TYPE_MASK;
- if ((type == SMD_TYPE_APPS_MODEM) ||
- (type == SMD_TYPE_APPS_DSP))
- if (!smd_alloc_channel(shared[n].name, shared[n].cid, ctype))
- smd_ch_allocated[n] = 1;
- }
-}
-
-static void do_nothing_notify(void *priv, unsigned flags)
-{
-}
-
-struct smd_channel *smd_get_channel(const char *name)
-{
- struct smd_channel *ch;
-
- mutex_lock(&smd_creation_mutex);
- list_for_each_entry(ch, &smd_ch_closed_list, ch_list) {
- if (!strcmp(name, ch->name)) {
- list_del(&ch->ch_list);
- mutex_unlock(&smd_creation_mutex);
- return ch;
- }
- }
- mutex_unlock(&smd_creation_mutex);
-
- return NULL;
-}
-
-int smd_open(const char *name, smd_channel_t **_ch,
- void *priv, void (*notify)(void *, unsigned))
-{
- struct smd_channel *ch;
- unsigned long flags;
-
- if (smd_initialized == 0) {
- pr_info("smd_open() before smd_init()\n");
- return -ENODEV;
- }
-
- ch = smd_get_channel(name);
- if (!ch)
- return -ENODEV;
-
- if (notify == 0)
- notify = do_nothing_notify;
-
- ch->notify = notify;
- ch->current_packet = 0;
- ch->last_state = SMD_SS_CLOSED;
- ch->priv = priv;
-
- *_ch = ch;
-
- spin_lock_irqsave(&smd_lock, flags);
-
- if ((ch->type & SMD_TYPE_MASK) == SMD_TYPE_APPS_MODEM)
- list_add(&ch->ch_list, &smd_ch_list_modem);
- else
- list_add(&ch->ch_list, &smd_ch_list_dsp);
-
- /* If the remote side is CLOSING, we need to get it to
- * move to OPENING (which we'll do by moving from CLOSED to
- * OPENING) and then get it to move from OPENING to
- * OPENED (by doing the same state change ourselves).
- *
- * Otherwise, it should be OPENING and we can move directly
- * to OPENED so that it will follow.
- */
- if (ch->recv->state == SMD_SS_CLOSING) {
- ch->send->head = 0;
- ch_set_state(ch, SMD_SS_OPENING);
- } else {
- ch_set_state(ch, SMD_SS_OPENED);
- }
- spin_unlock_irqrestore(&smd_lock, flags);
- smd_kick(ch);
-
- return 0;
-}
-
-int smd_close(smd_channel_t *ch)
-{
- unsigned long flags;
-
- if (ch == 0)
- return -1;
-
- spin_lock_irqsave(&smd_lock, flags);
- ch->notify = do_nothing_notify;
- list_del(&ch->ch_list);
- ch_set_state(ch, SMD_SS_CLOSED);
- spin_unlock_irqrestore(&smd_lock, flags);
-
- mutex_lock(&smd_creation_mutex);
- list_add(&ch->ch_list, &smd_ch_closed_list);
- mutex_unlock(&smd_creation_mutex);
-
- return 0;
-}
-
-int smd_read(smd_channel_t *ch, void *data, int len)
-{
- return ch->read(ch, data, len);
-}
-
-int smd_write(smd_channel_t *ch, const void *data, int len)
-{
- return ch->write(ch, data, len);
-}
-
-int smd_write_atomic(smd_channel_t *ch, const void *data, int len)
-{
- unsigned long flags;
- int res;
- spin_lock_irqsave(&smd_lock, flags);
- res = ch->write(ch, data, len);
- spin_unlock_irqrestore(&smd_lock, flags);
- return res;
-}
-
-int smd_read_avail(smd_channel_t *ch)
-{
- return ch->read_avail(ch);
-}
-
-int smd_write_avail(smd_channel_t *ch)
-{
- return ch->write_avail(ch);
-}
-
-int smd_wait_until_readable(smd_channel_t *ch, int bytes)
-{
- return -1;
-}
-
-int smd_wait_until_writable(smd_channel_t *ch, int bytes)
-{
- return -1;
-}
-
-int smd_cur_packet_size(smd_channel_t *ch)
-{
- return ch->current_packet;
-}
-
-
-/* ------------------------------------------------------------------------- */
-
-void *smem_alloc(unsigned id, unsigned size)
-{
- return smem_find(id, size);
-}
-
-void __iomem *smem_item(unsigned id, unsigned *size)
-{
- struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE;
- struct smem_heap_entry *toc = shared->heap_toc;
-
- if (id >= SMEM_NUM_ITEMS)
- return NULL;
-
- if (toc[id].allocated) {
- *size = toc[id].size;
- return (MSM_SHARED_RAM_BASE + toc[id].offset);
- } else {
- *size = 0;
- }
-
- return NULL;
-}
-
-void *smem_find(unsigned id, unsigned size_in)
-{
- unsigned size;
- void *ptr;
-
- ptr = smem_item(id, &size);
- if (!ptr)
- return 0;
-
- size_in = ALIGN(size_in, 8);
- if (size_in != size) {
- pr_err("smem_find(%d, %d): wrong size %d\n",
- id, size_in, size);
- return 0;
- }
-
- return ptr;
-}
-
-static irqreturn_t smsm_irq_handler(int irq, void *data)
-{
- unsigned long flags;
- unsigned apps, modm;
-
- spin_lock_irqsave(&smem_lock, flags);
-
- apps = raw_smsm_get_state(SMSM_STATE_APPS);
- modm = raw_smsm_get_state(SMSM_STATE_MODEM);
-
- if (msm_smd_debug_mask & MSM_SMSM_DEBUG)
- pr_info("<SM %08x %08x>\n", apps, modm);
- if (modm & SMSM_RESET)
- handle_modem_crash();
-
- do_smd_probe();
-
- spin_unlock_irqrestore(&smem_lock, flags);
- return IRQ_HANDLED;
-}
-
-int smsm_change_state(enum smsm_state_item item,
- uint32_t clear_mask, uint32_t set_mask)
-{
- void __iomem *addr = smd_info.state + item * 4;
- unsigned long flags;
- unsigned state;
-
- if (!smd_info.ready)
- return -EIO;
-
- spin_lock_irqsave(&smem_lock, flags);
-
- if (raw_smsm_get_state(SMSM_STATE_MODEM) & SMSM_RESET)
- handle_modem_crash();
-
- state = (readl(addr) & ~clear_mask) | set_mask;
- writel(state, addr);
-
- if (msm_smd_debug_mask & MSM_SMSM_DEBUG)
- pr_info("smsm_change_state %d %x\n", item, state);
- notify_other_smsm();
-
- spin_unlock_irqrestore(&smem_lock, flags);
-
- return 0;
-}
-
-uint32_t smsm_get_state(enum smsm_state_item item)
-{
- unsigned long flags;
- uint32_t rv;
-
- spin_lock_irqsave(&smem_lock, flags);
-
- rv = readl(smd_info.state + item * 4);
-
- if (item == SMSM_STATE_MODEM && (rv & SMSM_RESET))
- handle_modem_crash();
-
- spin_unlock_irqrestore(&smem_lock, flags);
-
- return rv;
-}
-
-#ifdef CONFIG_ARCH_MSM_SCORPION
-
-int smsm_set_sleep_duration(uint32_t delay)
-{
- struct msm_dem_slave_data *ptr;
-
- ptr = smem_find(SMEM_APPS_DEM_SLAVE_DATA, sizeof(*ptr));
- if (ptr == NULL) {
- pr_err("smsm_set_sleep_duration <SM NO APPS_DEM_SLAVE_DATA>\n");
- return -EIO;
- }
- if (msm_smd_debug_mask & MSM_SMSM_DEBUG)
- pr_info("smsm_set_sleep_duration %d -> %d\n",
- ptr->sleep_time, delay);
- ptr->sleep_time = delay;
- return 0;
-}
-
-#else
-
-int smsm_set_sleep_duration(uint32_t delay)
-{
- uint32_t *ptr;
-
- ptr = smem_find(SMEM_SMSM_SLEEP_DELAY, sizeof(*ptr));
- if (ptr == NULL) {
- pr_err("smsm_set_sleep_duration <SM NO SLEEP_DELAY>\n");
- return -EIO;
- }
- if (msm_smd_debug_mask & MSM_SMSM_DEBUG)
- pr_info("smsm_set_sleep_duration %d -> %d\n",
- *ptr, delay);
- *ptr = delay;
- return 0;
-}
-
-#endif
-
-int smd_core_init(void)
-{
- int r;
-
- /* wait for essential items to be initialized */
- for (;;) {
- unsigned size;
- void __iomem *state;
- state = smem_item(SMEM_SMSM_SHARED_STATE, &size);
- if (size == SMSM_V1_SIZE || size == SMSM_V2_SIZE) {
- smd_info.state = state;
- break;
- }
- }
-
- smd_info.ready = 1;
-
- r = request_irq(INT_A9_M2A_0, smd_modem_irq_handler,
- IRQF_TRIGGER_RISING, "smd_dev", 0);
- if (r < 0)
- return r;
- r = enable_irq_wake(INT_A9_M2A_0);
- if (r < 0)
- pr_err("smd_core_init: enable_irq_wake failed for A9_M2A_0\n");
-
- r = request_irq(INT_A9_M2A_5, smsm_irq_handler,
- IRQF_TRIGGER_RISING, "smsm_dev", 0);
- if (r < 0) {
- free_irq(INT_A9_M2A_0, 0);
- return r;
- }
- r = enable_irq_wake(INT_A9_M2A_5);
- if (r < 0)
- pr_err("smd_core_init: enable_irq_wake failed for A9_M2A_5\n");
-
-#if defined(CONFIG_QDSP6)
- r = request_irq(INT_ADSP_A11, smd_dsp_irq_handler,
- IRQF_TRIGGER_RISING, "smd_dsp", 0);
- if (r < 0) {
- free_irq(INT_A9_M2A_0, 0);
- free_irq(INT_A9_M2A_5, 0);
- return r;
- }
-#endif
-
- /* check for any SMD channels that may already exist */
- do_smd_probe();
-
- /* indicate that we're up and running */
- smsm_change_state(SMSM_STATE_APPS,
- ~0, SMSM_INIT | SMSM_SMDINIT | SMSM_RPCINIT | SMSM_RUN);
-#ifdef CONFIG_ARCH_MSM_SCORPION
- smsm_change_state(SMSM_STATE_APPS_DEM, ~0, 0);
-#endif
-
- return 0;
-}
-
-static int msm_smd_probe(struct platform_device *pdev)
-{
- /*
- * If we haven't waited for the ARM9 to boot up till now,
- * then we need to wait here. Otherwise this should just
- * return immediately.
- */
- proc_comm_boot_wait();
-
- INIT_WORK(&probe_work, smd_channel_probe_worker);
-
- if (smd_core_init()) {
- pr_err("smd_core_init() failed\n");
- return -1;
- }
-
- do_smd_probe();
-
- msm_check_for_modem_crash = check_for_modem_crash;
-
- msm_init_last_radio_log(THIS_MODULE);
-
- smd_initialized = 1;
-
- return 0;
-}
-
-static struct platform_driver msm_smd_driver = {
- .probe = msm_smd_probe,
- .driver = {
- .name = MODULE_NAME,
- },
-};
-
-static int __init msm_smd_init(void)
-{
- return platform_driver_register(&msm_smd_driver);
-}
-
-module_init(msm_smd_init);
-
-MODULE_DESCRIPTION("MSM Shared Memory Core");
-MODULE_AUTHOR("Brian Swetland <swetland@google.com>");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-msm/smd_debug.c b/arch/arm/mach-msm/smd_debug.c
deleted file mode 100644
index 8056b3e5590f..000000000000
--- a/arch/arm/mach-msm/smd_debug.c
+++ /dev/null
@@ -1,311 +0,0 @@
-/* arch/arm/mach-msm/smd_debug.c
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/debugfs.h>
-#include <linux/list.h>
-
-#include <mach/msm_iomap.h>
-
-#include "smd_private.h"
-
-#if defined(CONFIG_DEBUG_FS)
-
-static char *chstate(unsigned n)
-{
- switch (n) {
- case SMD_SS_CLOSED:
- return "CLOSED";
- case SMD_SS_OPENING:
- return "OPENING";
- case SMD_SS_OPENED:
- return "OPENED";
- case SMD_SS_FLUSHING:
- return "FLUSHING";
- case SMD_SS_CLOSING:
- return "CLOSING";
- case SMD_SS_RESET:
- return "RESET";
- case SMD_SS_RESET_OPENING:
- return "ROPENING";
- default:
- return "UNKNOWN";
- }
-}
-
-
-static int dump_ch(char *buf, int max, struct smd_channel *ch)
-{
- volatile struct smd_half_channel *s = ch->send;
- volatile struct smd_half_channel *r = ch->recv;
-
- return scnprintf(
- buf, max,
- "ch%02d:"
- " %8s(%05d/%05d) %c%c%c%c%c%c%c <->"
- " %8s(%05d/%05d) %c%c%c%c%c%c%c '%s'\n", ch->n,
- chstate(s->state), s->tail, s->head,
- s->fDSR ? 'D' : 'd',
- s->fCTS ? 'C' : 'c',
- s->fCD ? 'C' : 'c',
- s->fRI ? 'I' : 'i',
- s->fHEAD ? 'W' : 'w',
- s->fTAIL ? 'R' : 'r',
- s->fSTATE ? 'S' : 's',
- chstate(r->state), r->tail, r->head,
- r->fDSR ? 'D' : 'd',
- r->fCTS ? 'R' : 'r',
- r->fCD ? 'C' : 'c',
- r->fRI ? 'I' : 'i',
- r->fHEAD ? 'W' : 'w',
- r->fTAIL ? 'R' : 'r',
- r->fSTATE ? 'S' : 's',
- ch->name
- );
-}
-
-static int debug_read_stat(char *buf, int max)
-{
- char *msg;
- int i = 0;
-
- msg = smem_find(ID_DIAG_ERR_MSG, SZ_DIAG_ERR_MSG);
-
- if (raw_smsm_get_state(SMSM_STATE_MODEM) & SMSM_RESET)
- i += scnprintf(buf + i, max - i,
- "smsm: ARM9 HAS CRASHED\n");
-
- i += scnprintf(buf + i, max - i, "smsm: a9: %08x a11: %08x\n",
- raw_smsm_get_state(SMSM_STATE_MODEM),
- raw_smsm_get_state(SMSM_STATE_APPS));
-#ifdef CONFIG_ARCH_MSM_SCORPION
- i += scnprintf(buf + i, max - i, "smsm dem: apps: %08x modem: %08x "
- "qdsp6: %08x power: %08x time: %08x\n",
- raw_smsm_get_state(SMSM_STATE_APPS_DEM),
- raw_smsm_get_state(SMSM_STATE_MODEM_DEM),
- raw_smsm_get_state(SMSM_STATE_QDSP6_DEM),
- raw_smsm_get_state(SMSM_STATE_POWER_MASTER_DEM),
- raw_smsm_get_state(SMSM_STATE_TIME_MASTER_DEM));
-#endif
- if (msg) {
- msg[SZ_DIAG_ERR_MSG - 1] = 0;
- i += scnprintf(buf + i, max - i, "diag: '%s'\n", msg);
- }
- return i;
-}
-
-static int debug_read_mem(char *buf, int max)
-{
- unsigned n;
- struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE;
- struct smem_heap_entry *toc = shared->heap_toc;
- int i = 0;
-
- i += scnprintf(buf + i, max - i,
- "heap: init=%d free=%d remain=%d\n",
- shared->heap_info.initialized,
- shared->heap_info.free_offset,
- shared->heap_info.heap_remaining);
-
- for (n = 0; n < SMEM_NUM_ITEMS; n++) {
- if (toc[n].allocated == 0)
- continue;
- i += scnprintf(buf + i, max - i,
- "%04d: offset %08x size %08x\n",
- n, toc[n].offset, toc[n].size);
- }
- return i;
-}
-
-static int debug_read_ch(char *buf, int max)
-{
- struct smd_channel *ch;
- unsigned long flags;
- int i = 0;
-
- spin_lock_irqsave(&smd_lock, flags);
- list_for_each_entry(ch, &smd_ch_list_dsp, ch_list)
- i += dump_ch(buf + i, max - i, ch);
- list_for_each_entry(ch, &smd_ch_list_modem, ch_list)
- i += dump_ch(buf + i, max - i, ch);
- list_for_each_entry(ch, &smd_ch_closed_list, ch_list)
- i += dump_ch(buf + i, max - i, ch);
- spin_unlock_irqrestore(&smd_lock, flags);
-
- return i;
-}
-
-static int debug_read_version(char *buf, int max)
-{
- struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE;
- unsigned version = shared->version[VERSION_MODEM];
- return sprintf(buf, "%d.%d\n", version >> 16, version & 0xffff);
-}
-
-static int debug_read_build_id(char *buf, int max)
-{
- unsigned size;
- void *data;
-
- data = smem_item(SMEM_HW_SW_BUILD_ID, &size);
- if (!data)
- return 0;
-
- if (size >= max)
- size = max;
- memcpy(buf, data, size);
-
- return size;
-}
-
-static int debug_read_alloc_tbl(char *buf, int max)
-{
- struct smd_alloc_elm *shared;
- int n, i = 0;
-
- shared = smem_find(ID_CH_ALLOC_TBL, sizeof(*shared) * 64);
-
- for (n = 0; n < 64; n++) {
- if (shared[n].ref_count == 0)
- continue;
- i += scnprintf(buf + i, max - i,
- "%03d: %-20s cid=%02d type=%03d "
- "kind=%02d ref_count=%d\n",
- n, shared[n].name, shared[n].cid,
- shared[n].ctype & 0xff,
- (shared[n].ctype >> 8) & 0xf,
- shared[n].ref_count);
- }
-
- return i;
-}
-
-#define DEBUG_BUFMAX 4096
-static char debug_buffer[DEBUG_BUFMAX];
-
-static ssize_t debug_read(struct file *file, char __user *buf,
- size_t count, loff_t *ppos)
-{
- int (*fill)(char *buf, int max) = file->private_data;
- int bsize = fill(debug_buffer, DEBUG_BUFMAX);
- return simple_read_from_buffer(buf, count, ppos, debug_buffer, bsize);
-}
-
-static const struct file_operations debug_ops = {
- .read = debug_read,
- .open = simple_open,
- .llseek = default_llseek,
-};
-
-static void debug_create(const char *name, umode_t mode,
- struct dentry *dent,
- int (*fill)(char *buf, int max))
-{
- debugfs_create_file(name, mode, dent, fill, &debug_ops);
-}
-
-int __init smd_debugfs_init(void)
-{
- struct dentry *dent;
-
- dent = debugfs_create_dir("smd", 0);
- if (IS_ERR(dent))
- return 1;
-
- debug_create("ch", 0444, dent, debug_read_ch);
- debug_create("stat", 0444, dent, debug_read_stat);
- debug_create("mem", 0444, dent, debug_read_mem);
- debug_create("version", 0444, dent, debug_read_version);
- debug_create("tbl", 0444, dent, debug_read_alloc_tbl);
- debug_create("build", 0444, dent, debug_read_build_id);
-
- return 0;
-}
-
-#endif
-
-
-#define MAX_NUM_SLEEP_CLIENTS 64
-#define MAX_SLEEP_NAME_LEN 8
-
-#define NUM_GPIO_INT_REGISTERS 6
-#define GPIO_SMEM_NUM_GROUPS 2
-#define GPIO_SMEM_MAX_PC_INTERRUPTS 8
-
-struct tramp_gpio_save {
- unsigned int enable;
- unsigned int detect;
- unsigned int polarity;
-};
-
-struct tramp_gpio_smem {
- uint16_t num_fired[GPIO_SMEM_NUM_GROUPS];
- uint16_t fired[GPIO_SMEM_NUM_GROUPS][GPIO_SMEM_MAX_PC_INTERRUPTS];
- uint32_t enabled[NUM_GPIO_INT_REGISTERS];
- uint32_t detection[NUM_GPIO_INT_REGISTERS];
- uint32_t polarity[NUM_GPIO_INT_REGISTERS];
-};
-
-
-void smsm_print_sleep_info(void)
-{
- unsigned long flags;
- uint32_t *ptr;
-#ifndef CONFIG_ARCH_MSM_SCORPION
- struct tramp_gpio_smem *gpio;
- struct smsm_interrupt_info *int_info;
-#endif
-
-
- spin_lock_irqsave(&smem_lock, flags);
-
- ptr = smem_alloc(SMEM_SMSM_SLEEP_DELAY, sizeof(*ptr));
- if (ptr)
- pr_info("SMEM_SMSM_SLEEP_DELAY: %x\n", *ptr);
-
- ptr = smem_alloc(SMEM_SMSM_LIMIT_SLEEP, sizeof(*ptr));
- if (ptr)
- pr_info("SMEM_SMSM_LIMIT_SLEEP: %x\n", *ptr);
-
- ptr = smem_alloc(SMEM_SLEEP_POWER_COLLAPSE_DISABLED, sizeof(*ptr));
- if (ptr)
- pr_info("SMEM_SLEEP_POWER_COLLAPSE_DISABLED: %x\n", *ptr);
-
-#ifndef CONFIG_ARCH_MSM_SCORPION
- int_info = smem_alloc(SMEM_SMSM_INT_INFO, sizeof(*int_info));
- if (int_info)
- pr_info("SMEM_SMSM_INT_INFO %x %x %x\n",
- int_info->interrupt_mask,
- int_info->pending_interrupts,
- int_info->wakeup_reason);
-
- gpio = smem_alloc(SMEM_GPIO_INT, sizeof(*gpio));
- if (gpio) {
- int i;
- for (i = 0; i < NUM_GPIO_INT_REGISTERS; i++)
- pr_info("SMEM_GPIO_INT: %d: e %x d %x p %x\n",
- i, gpio->enabled[i], gpio->detection[i],
- gpio->polarity[i]);
-
- for (i = 0; i < GPIO_SMEM_NUM_GROUPS; i++)
- pr_info("SMEM_GPIO_INT: %d: f %d: %d %d...\n",
- i, gpio->num_fired[i], gpio->fired[i][0],
- gpio->fired[i][1]);
- }
-#else
-#endif
- spin_unlock_irqrestore(&smem_lock, flags);
-}
-
diff --git a/arch/arm/mach-msm/smd_private.h b/arch/arm/mach-msm/smd_private.h
deleted file mode 100644
index 727bfe68aa9b..000000000000
--- a/arch/arm/mach-msm/smd_private.h
+++ /dev/null
@@ -1,403 +0,0 @@
-/* arch/arm/mach-msm/smd_private.h
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007 QUALCOMM Incorporated
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-#ifndef _ARCH_ARM_MACH_MSM_MSM_SMD_PRIVATE_H_
-#define _ARCH_ARM_MACH_MSM_MSM_SMD_PRIVATE_H_
-
-#include <linux/platform_device.h>
-#include <linux/spinlock.h>
-#include <linux/list.h>
-#include <linux/io.h>
-
-#include <mach/msm_iomap.h>
-
-struct smem_heap_info {
- unsigned initialized;
- unsigned free_offset;
- unsigned heap_remaining;
- unsigned reserved;
-};
-
-struct smem_heap_entry {
- unsigned allocated;
- unsigned offset;
- unsigned size;
- unsigned reserved;
-};
-
-struct smem_proc_comm {
- unsigned command;
- unsigned status;
- unsigned data1;
- unsigned data2;
-};
-
-#define PC_APPS 0
-#define PC_MODEM 1
-
-#define VERSION_SMD 0
-#define VERSION_QDSP6 4
-#define VERSION_APPS_SBL 6
-#define VERSION_MODEM_SBL 7
-#define VERSION_APPS 8
-#define VERSION_MODEM 9
-
-struct smem_shared {
- struct smem_proc_comm proc_comm[4];
- unsigned version[32];
- struct smem_heap_info heap_info;
- struct smem_heap_entry heap_toc[512];
-};
-
-#define SMSM_V1_SIZE (sizeof(unsigned) * 8)
-#define SMSM_V2_SIZE (sizeof(unsigned) * 4)
-
-#ifdef CONFIG_MSM_SMD_PKG3
-struct smsm_interrupt_info {
- uint32_t interrupt_mask;
- uint32_t pending_interrupts;
- uint32_t wakeup_reason;
-};
-#else
-#define DEM_MAX_PORT_NAME_LEN (20)
-struct msm_dem_slave_data {
- uint32_t sleep_time;
- uint32_t interrupt_mask;
- uint32_t resources_used;
- uint32_t reserved1;
-
- uint32_t wakeup_reason;
- uint32_t pending_interrupts;
- uint32_t rpc_prog;
- uint32_t rpc_proc;
- char smd_port_name[DEM_MAX_PORT_NAME_LEN];
- uint32_t reserved2;
-};
-#endif
-
-#define SZ_DIAG_ERR_MSG 0xC8
-#define ID_DIAG_ERR_MSG SMEM_DIAG_ERR_MESSAGE
-#define ID_SMD_CHANNELS SMEM_SMD_BASE_ID
-#define ID_SHARED_STATE SMEM_SMSM_SHARED_STATE
-#define ID_CH_ALLOC_TBL SMEM_CHANNEL_ALLOC_TBL
-
-#define SMSM_INIT 0x00000001
-#define SMSM_SMDINIT 0x00000008
-#define SMSM_RPCINIT 0x00000020
-#define SMSM_RESET 0x00000040
-#define SMSM_RSA 0x00000080
-#define SMSM_RUN 0x00000100
-#define SMSM_PWRC 0x00000200
-#define SMSM_TIMEWAIT 0x00000400
-#define SMSM_TIMEINIT 0x00000800
-#define SMSM_PWRC_EARLY_EXIT 0x00001000
-#define SMSM_WFPI 0x00002000
-#define SMSM_SLEEP 0x00004000
-#define SMSM_SLEEPEXIT 0x00008000
-#define SMSM_APPS_REBOOT 0x00020000
-#define SMSM_SYSTEM_POWER_DOWN 0x00040000
-#define SMSM_SYSTEM_REBOOT 0x00080000
-#define SMSM_SYSTEM_DOWNLOAD 0x00100000
-#define SMSM_PWRC_SUSPEND 0x00200000
-#define SMSM_APPS_SHUTDOWN 0x00400000
-#define SMSM_SMD_LOOPBACK 0x00800000
-#define SMSM_RUN_QUIET 0x01000000
-#define SMSM_MODEM_WAIT 0x02000000
-#define SMSM_MODEM_BREAK 0x04000000
-#define SMSM_MODEM_CONTINUE 0x08000000
-#define SMSM_UNKNOWN 0x80000000
-
-#define SMSM_WKUP_REASON_RPC 0x00000001
-#define SMSM_WKUP_REASON_INT 0x00000002
-#define SMSM_WKUP_REASON_GPIO 0x00000004
-#define SMSM_WKUP_REASON_TIMER 0x00000008
-#define SMSM_WKUP_REASON_ALARM 0x00000010
-#define SMSM_WKUP_REASON_RESET 0x00000020
-
-#ifdef CONFIG_ARCH_MSM7X00A
-enum smsm_state_item {
- SMSM_STATE_APPS = 1,
- SMSM_STATE_MODEM = 3,
- SMSM_STATE_COUNT,
-};
-#else
-enum smsm_state_item {
- SMSM_STATE_APPS,
- SMSM_STATE_MODEM,
- SMSM_STATE_HEXAGON,
- SMSM_STATE_APPS_DEM,
- SMSM_STATE_MODEM_DEM,
- SMSM_STATE_QDSP6_DEM,
- SMSM_STATE_POWER_MASTER_DEM,
- SMSM_STATE_TIME_MASTER_DEM,
- SMSM_STATE_COUNT,
-};
-#endif
-
-void *smem_alloc(unsigned id, unsigned size);
-int smsm_change_state(enum smsm_state_item item, uint32_t clear_mask, uint32_t set_mask);
-uint32_t smsm_get_state(enum smsm_state_item item);
-int smsm_set_sleep_duration(uint32_t delay);
-void smsm_print_sleep_info(void);
-
-#define SMEM_NUM_SMD_CHANNELS 64
-
-typedef enum {
- /* fixed items */
- SMEM_PROC_COMM = 0,
- SMEM_HEAP_INFO,
- SMEM_ALLOCATION_TABLE,
- SMEM_VERSION_INFO,
- SMEM_HW_RESET_DETECT,
- SMEM_AARM_WARM_BOOT,
- SMEM_DIAG_ERR_MESSAGE,
- SMEM_SPINLOCK_ARRAY,
- SMEM_MEMORY_BARRIER_LOCATION,
-
- /* dynamic items */
- SMEM_AARM_PARTITION_TABLE,
- SMEM_AARM_BAD_BLOCK_TABLE,
- SMEM_RESERVE_BAD_BLOCKS,
- SMEM_WM_UUID,
- SMEM_CHANNEL_ALLOC_TBL,
- SMEM_SMD_BASE_ID,
- SMEM_SMEM_LOG_IDX = SMEM_SMD_BASE_ID + SMEM_NUM_SMD_CHANNELS,
- SMEM_SMEM_LOG_EVENTS,
- SMEM_SMEM_STATIC_LOG_IDX,
- SMEM_SMEM_STATIC_LOG_EVENTS,
- SMEM_SMEM_SLOW_CLOCK_SYNC,
- SMEM_SMEM_SLOW_CLOCK_VALUE,
- SMEM_BIO_LED_BUF,
- SMEM_SMSM_SHARED_STATE,
- SMEM_SMSM_INT_INFO,
- SMEM_SMSM_SLEEP_DELAY,
- SMEM_SMSM_LIMIT_SLEEP,
- SMEM_SLEEP_POWER_COLLAPSE_DISABLED,
- SMEM_KEYPAD_KEYS_PRESSED,
- SMEM_KEYPAD_STATE_UPDATED,
- SMEM_KEYPAD_STATE_IDX,
- SMEM_GPIO_INT,
- SMEM_MDDI_LCD_IDX,
- SMEM_MDDI_HOST_DRIVER_STATE,
- SMEM_MDDI_LCD_DISP_STATE,
- SMEM_LCD_CUR_PANEL,
- SMEM_MARM_BOOT_SEGMENT_INFO,
- SMEM_AARM_BOOT_SEGMENT_INFO,
- SMEM_SLEEP_STATIC,
- SMEM_SCORPION_FREQUENCY,
- SMEM_SMD_PROFILES,
- SMEM_TSSC_BUSY,
- SMEM_HS_SUSPEND_FILTER_INFO,
- SMEM_BATT_INFO,
- SMEM_APPS_BOOT_MODE,
- SMEM_VERSION_FIRST,
- SMEM_VERSION_LAST = SMEM_VERSION_FIRST + 24,
- SMEM_OSS_RRCASN1_BUF1,
- SMEM_OSS_RRCASN1_BUF2,
- SMEM_ID_VENDOR0,
- SMEM_ID_VENDOR1,
- SMEM_ID_VENDOR2,
- SMEM_HW_SW_BUILD_ID,
- SMEM_SMD_BLOCK_PORT_BASE_ID,
- SMEM_SMD_BLOCK_PORT_PROC0_HEAP = SMEM_SMD_BLOCK_PORT_BASE_ID + SMEM_NUM_SMD_CHANNELS,
- SMEM_SMD_BLOCK_PORT_PROC1_HEAP = SMEM_SMD_BLOCK_PORT_PROC0_HEAP + SMEM_NUM_SMD_CHANNELS,
- SMEM_I2C_MUTEX = SMEM_SMD_BLOCK_PORT_PROC1_HEAP + SMEM_NUM_SMD_CHANNELS,
- SMEM_SCLK_CONVERSION,
- SMEM_SMD_SMSM_INTR_MUX,
- SMEM_SMSM_CPU_INTR_MASK,
- SMEM_APPS_DEM_SLAVE_DATA,
- SMEM_QDSP6_DEM_SLAVE_DATA,
- SMEM_CLKREGIM_BSP,
- SMEM_CLKREGIM_SOURCES,
- SMEM_SMD_FIFO_BASE_ID,
- SMEM_USABLE_RAM_PARTITION_TABLE = SMEM_SMD_FIFO_BASE_ID + SMEM_NUM_SMD_CHANNELS,
- SMEM_POWER_ON_STATUS_INFO,
- SMEM_DAL_AREA,
- SMEM_SMEM_LOG_POWER_IDX,
- SMEM_SMEM_LOG_POWER_WRAP,
- SMEM_SMEM_LOG_POWER_EVENTS,
- SMEM_ERR_CRASH_LOG,
- SMEM_ERR_F3_TRACE_LOG,
- SMEM_NUM_ITEMS,
-} smem_mem_type;
-
-
-#define SMD_SS_CLOSED 0x00000000
-#define SMD_SS_OPENING 0x00000001
-#define SMD_SS_OPENED 0x00000002
-#define SMD_SS_FLUSHING 0x00000003
-#define SMD_SS_CLOSING 0x00000004
-#define SMD_SS_RESET 0x00000005
-#define SMD_SS_RESET_OPENING 0x00000006
-
-#define SMD_BUF_SIZE 8192
-#define SMD_CHANNELS 64
-
-#define SMD_HEADER_SIZE 20
-
-struct smd_alloc_elm {
- char name[20];
- uint32_t cid;
- uint32_t ctype;
- uint32_t ref_count;
-};
-
-struct smd_half_channel {
- unsigned state;
- unsigned char fDSR;
- unsigned char fCTS;
- unsigned char fCD;
- unsigned char fRI;
- unsigned char fHEAD;
- unsigned char fTAIL;
- unsigned char fSTATE;
- unsigned char fUNUSED;
- unsigned tail;
- unsigned head;
-} __attribute__(( aligned(4), packed ));
-
-/* Only used on SMD package v3 on msm7201a */
-struct smd_shared_v1 {
- struct smd_half_channel ch0;
- unsigned char data0[SMD_BUF_SIZE];
- struct smd_half_channel ch1;
- unsigned char data1[SMD_BUF_SIZE];
-};
-
-/* Used on SMD package v4 */
-struct smd_shared_v2 {
- struct smd_half_channel ch0;
- struct smd_half_channel ch1;
-};
-
-struct smd_channel {
- volatile struct smd_half_channel *send;
- volatile struct smd_half_channel *recv;
- unsigned char *send_data;
- unsigned char *recv_data;
-
- unsigned fifo_mask;
- unsigned fifo_size;
- unsigned current_packet;
- unsigned n;
-
- struct list_head ch_list;
-
- void *priv;
- void (*notify)(void *priv, unsigned flags);
-
- int (*read)(struct smd_channel *ch, void *data, int len);
- int (*write)(struct smd_channel *ch, const void *data, int len);
- int (*read_avail)(struct smd_channel *ch);
- int (*write_avail)(struct smd_channel *ch);
-
- void (*update_state)(struct smd_channel *ch);
- unsigned last_state;
- void (*notify_other_cpu)(void);
- unsigned type;
-
- char name[32];
- struct platform_device pdev;
-};
-
-#define SMD_TYPE_MASK 0x0FF
-#define SMD_TYPE_APPS_MODEM 0x000
-#define SMD_TYPE_APPS_DSP 0x001
-#define SMD_TYPE_MODEM_DSP 0x002
-
-#define SMD_KIND_MASK 0xF00
-#define SMD_KIND_UNKNOWN 0x000
-#define SMD_KIND_STREAM 0x100
-#define SMD_KIND_PACKET 0x200
-
-extern struct list_head smd_ch_closed_list;
-extern struct list_head smd_ch_list_modem;
-extern struct list_head smd_ch_list_dsp;
-
-extern spinlock_t smd_lock;
-extern spinlock_t smem_lock;
-
-void *smem_find(unsigned id, unsigned size);
-void *smem_item(unsigned id, unsigned *size);
-uint32_t raw_smsm_get_state(enum smsm_state_item item);
-
-extern void msm_init_last_radio_log(struct module *);
-
-#ifdef CONFIG_MSM_SMD_PKG3
-/*
- * This allocator assumes an SMD Package v3 which only exists on
- * MSM7x00 SoC's.
- */
-static inline int _smd_alloc_channel(struct smd_channel *ch)
-{
- struct smd_shared_v1 *shared1;
-
- shared1 = smem_alloc(ID_SMD_CHANNELS + ch->n, sizeof(*shared1));
- if (!shared1) {
- pr_err("smd_alloc_channel() cid %d does not exist\n", ch->n);
- return -1;
- }
- ch->send = &shared1->ch0;
- ch->recv = &shared1->ch1;
- ch->send_data = shared1->data0;
- ch->recv_data = shared1->data1;
- ch->fifo_size = SMD_BUF_SIZE;
- return 0;
-}
-#else
-/*
- * This allocator assumes an SMD Package v4, the most common
- * and the default.
- */
-static inline int _smd_alloc_channel(struct smd_channel *ch)
-{
- struct smd_shared_v2 *shared2;
- void *buffer;
- unsigned buffer_sz;
-
- shared2 = smem_alloc(SMEM_SMD_BASE_ID + ch->n, sizeof(*shared2));
- buffer = smem_item(SMEM_SMD_FIFO_BASE_ID + ch->n, &buffer_sz);
-
- if (!buffer)
- return -1;
-
- /* buffer must be a power-of-two size */
- if (buffer_sz & (buffer_sz - 1))
- return -1;
-
- buffer_sz /= 2;
- ch->send = &shared2->ch0;
- ch->recv = &shared2->ch1;
- ch->send_data = buffer;
- ch->recv_data = buffer + buffer_sz;
- ch->fifo_size = buffer_sz;
- return 0;
-}
-#endif /* CONFIG_MSM_SMD_PKG3 */
-
-#if defined(CONFIG_ARCH_MSM7X30)
-static inline void msm_a2m_int(uint32_t irq)
-{
- writel(1 << irq, MSM_GCC_BASE + 0x8);
-}
-#else
-static inline void msm_a2m_int(uint32_t irq)
-{
- writel(1, MSM_CSR_BASE + 0x400 + (irq * 4));
-}
-#endif /* CONFIG_ARCH_MSM7X30 */
-
-
-#endif
diff --git a/arch/arm/mach-msm/vreg.c b/arch/arm/mach-msm/vreg.c
deleted file mode 100644
index bd66ed04d6dc..000000000000
--- a/arch/arm/mach-msm/vreg.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/* arch/arm/mach-msm/vreg.c
- *
- * Copyright (C) 2008 Google, Inc.
- * Copyright (c) 2009, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/debugfs.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <mach/vreg.h>
-
-#include "proc_comm.h"
-
-struct vreg {
- const char *name;
- unsigned id;
- int status;
- unsigned refcnt;
-};
-
-#define VREG(_name, _id, _status, _refcnt) \
- { .name = _name, .id = _id, .status = _status, .refcnt = _refcnt }
-
-static struct vreg vregs[] = {
- VREG("msma", 0, 0, 0),
- VREG("msmp", 1, 0, 0),
- VREG("msme1", 2, 0, 0),
- VREG("msmc1", 3, 0, 0),
- VREG("msmc2", 4, 0, 0),
- VREG("gp3", 5, 0, 0),
- VREG("msme2", 6, 0, 0),
- VREG("gp4", 7, 0, 0),
- VREG("gp1", 8, 0, 0),
- VREG("tcxo", 9, 0, 0),
- VREG("pa", 10, 0, 0),
- VREG("rftx", 11, 0, 0),
- VREG("rfrx1", 12, 0, 0),
- VREG("rfrx2", 13, 0, 0),
- VREG("synt", 14, 0, 0),
- VREG("wlan", 15, 0, 0),
- VREG("usb", 16, 0, 0),
- VREG("boost", 17, 0, 0),
- VREG("mmc", 18, 0, 0),
- VREG("ruim", 19, 0, 0),
- VREG("msmc0", 20, 0, 0),
- VREG("gp2", 21, 0, 0),
- VREG("gp5", 22, 0, 0),
- VREG("gp6", 23, 0, 0),
- VREG("rf", 24, 0, 0),
- VREG("rf_vco", 26, 0, 0),
- VREG("mpll", 27, 0, 0),
- VREG("s2", 28, 0, 0),
- VREG("s3", 29, 0, 0),
- VREG("rfubm", 30, 0, 0),
- VREG("ncp", 31, 0, 0),
- VREG("gp7", 32, 0, 0),
- VREG("gp8", 33, 0, 0),
- VREG("gp9", 34, 0, 0),
- VREG("gp10", 35, 0, 0),
- VREG("gp11", 36, 0, 0),
- VREG("gp12", 37, 0, 0),
- VREG("gp13", 38, 0, 0),
- VREG("gp14", 39, 0, 0),
- VREG("gp15", 40, 0, 0),
- VREG("gp16", 41, 0, 0),
- VREG("gp17", 42, 0, 0),
- VREG("s4", 43, 0, 0),
- VREG("usb2", 44, 0, 0),
- VREG("wlan2", 45, 0, 0),
- VREG("xo_out", 46, 0, 0),
- VREG("lvsw0", 47, 0, 0),
- VREG("lvsw1", 48, 0, 0),
-};
-
-struct vreg *vreg_get(struct device *dev, const char *id)
-{
- int n;
- for (n = 0; n < ARRAY_SIZE(vregs); n++) {
- if (!strcmp(vregs[n].name, id))
- return vregs + n;
- }
- return ERR_PTR(-ENOENT);
-}
-
-void vreg_put(struct vreg *vreg)
-{
-}
-
-int vreg_enable(struct vreg *vreg)
-{
- unsigned id = vreg->id;
- unsigned enable = 1;
-
- if (vreg->refcnt == 0)
- vreg->status = msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable);
-
- if ((vreg->refcnt < UINT_MAX) && (!vreg->status))
- vreg->refcnt++;
-
- return vreg->status;
-}
-
-int vreg_disable(struct vreg *vreg)
-{
- unsigned id = vreg->id;
- unsigned enable = 0;
-
- if (!vreg->refcnt)
- return 0;
-
- if (vreg->refcnt == 1)
- vreg->status = msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable);
-
- if (!vreg->status)
- vreg->refcnt--;
-
- return vreg->status;
-}
-
-int vreg_set_level(struct vreg *vreg, unsigned mv)
-{
- unsigned id = vreg->id;
-
- vreg->status = msm_proc_comm(PCOM_VREG_SET_LEVEL, &id, &mv);
- return vreg->status;
-}
-
-#if defined(CONFIG_DEBUG_FS)
-
-static int vreg_debug_set(void *data, u64 val)
-{
- struct vreg *vreg = data;
- switch (val) {
- case 0:
- vreg_disable(vreg);
- break;
- case 1:
- vreg_enable(vreg);
- break;
- default:
- vreg_set_level(vreg, val);
- break;
- }
- return 0;
-}
-
-static int vreg_debug_get(void *data, u64 *val)
-{
- struct vreg *vreg = data;
-
- if (!vreg->status)
- *val = 0;
- else
- *val = 1;
-
- return 0;
-}
-
-static int vreg_debug_count_set(void *data, u64 val)
-{
- struct vreg *vreg = data;
- if (val > UINT_MAX)
- val = UINT_MAX;
- vreg->refcnt = val;
- return 0;
-}
-
-static int vreg_debug_count_get(void *data, u64 *val)
-{
- struct vreg *vreg = data;
-
- *val = vreg->refcnt;
-
- return 0;
-}
-
-DEFINE_SIMPLE_ATTRIBUTE(vreg_fops, vreg_debug_get, vreg_debug_set, "%llu\n");
-DEFINE_SIMPLE_ATTRIBUTE(vreg_count_fops, vreg_debug_count_get,
- vreg_debug_count_set, "%llu\n");
-
-static int __init vreg_debug_init(void)
-{
- struct dentry *dent;
- int n;
- char name[32];
- const char *refcnt_name = "_refcnt";
-
- dent = debugfs_create_dir("vreg", 0);
- if (IS_ERR(dent))
- return 0;
-
- for (n = 0; n < ARRAY_SIZE(vregs); n++) {
- (void) debugfs_create_file(vregs[n].name, 0644,
- dent, vregs + n, &vreg_fops);
-
- strlcpy(name, vregs[n].name, sizeof(name));
- strlcat(name, refcnt_name, sizeof(name));
- (void) debugfs_create_file(name, 0644,
- dent, vregs + n, &vreg_count_fops);
- }
-
- return 0;
-}
-
-device_initcall(vreg_debug_init);
-#endif