Merge with /shiny/git/linux-2.6/.git

24 files changed, 355 insertions, 453 deletions

diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index ad26e98f1e62..c4923fac8dff 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -447,9 +447,26 @@ pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
 	region->end   = res->end - offset;
 }
 
+void __devinit
+pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+			struct pci_bus_region *region)
+{
+	struct pci_sys_data *root = dev->sysdata;
+	unsigned long offset = 0;
+
+	if (res->flags & IORESOURCE_IO)
+		offset = root->io_offset;
+	if (res->flags & IORESOURCE_MEM)
+		offset = root->mem_offset;
+
+	res->start = region->start + offset;
+	res->end   = region->end + offset;
+}
+
 #ifdef CONFIG_HOTPLUG
 EXPORT_SYMBOL(pcibios_fixup_bus);
 EXPORT_SYMBOL(pcibios_resource_to_bus);
+EXPORT_SYMBOL(pcibios_bus_to_resource);
 #endif
 
 /*
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 295e0a8379cf..b2085735a2ba 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -176,6 +176,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	cpu_set(cpu, mm->cpu_vm_mask);
 	cpu_switch_mm(mm->pgd, mm);
 	enter_lazy_tlb(mm, current);
+	local_flush_tlb_all();
 
 	cpu_init();
 
diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
index 6976e60e47cb..2036ff15bda9 100644
--- a/arch/arm/lib/bitops.h
+++ b/arch/arm/lib/bitops.h
@@ -7,7 +7,7 @@
 1:	ldrexb	r2, [r1]
 	\instr	r2, r2, r3
 	strexb	r0, r2, [r1]
-	cmpne	r0, #0
+	cmp	r0, #0
 	bne	1b
 	mov	pc, lr
 	.endm
@@ -19,9 +19,9 @@
 	mov	r3, r2, lsl r3		@ create mask
 1:	ldrexb	r2, [r1]
 	ands	r0, r2, r3		@ save old value of bit
-	\instr	ip, r2, r3			@ toggle bit
-	strexb	r2, ip, [r1]
-	cmp	r2, #0
+	\instr	r2, r2, r3			@ toggle bit
+	strexb	ip, r2, [r1]
+	cmp	ip, #0
 	bne	1b
 	cmp	r0, #0
 	movne	r0, #1
diff --git a/arch/arm/mach-integrator/platsmp.c b/arch/arm/mach-integrator/platsmp.c
index aecf47ba033a..ea10bd8c972c 100644
--- a/arch/arm/mach-integrator/platsmp.c
+++ b/arch/arm/mach-integrator/platsmp.c
@@ -15,6 +15,7 @@
 #include <linux/mm.h>
 
 #include <asm/atomic.h>
+#include <asm/cacheflush.h>
 #include <asm/delay.h>
 #include <asm/mmu_context.h>
 #include <asm/procinfo.h>
@@ -80,6 +81,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * "cpu" is Linux's internal ID.
 	 */
 	pen_release = cpu;
+	flush_cache_all();
 
 	/*
 	 * XXX
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index 4ff4393ef0ea..7f58afb27e71 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -61,7 +61,7 @@ static struct plat_serial8250_port coyote_uart_data[] = {
 		.mapbase	= IXP4XX_UART2_BASE_PHYS,
 		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
 		.uartclk	= IXP4XX_UART_XTAL,
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index 8ba1cd9406e7..65e356bd10d6 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -83,7 +83,7 @@ static struct plat_serial8250_port gtwx5715_uart_platform_data[] = {
 	.mapbase	= IXP4XX_UART2_BASE_PHYS,
 	.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 	.irq		= IRQ_IXP4XX_UART2,
-	.flags		= UPF_BOOT_AUTOCONF,
+	.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 	.iotype		= UPIO_MEM,
 	.regshift	= 2,
 	.uartclk	= IXP4XX_UART_XTAL,
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index c2ba759e9946..4633470a6a37 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -82,7 +82,7 @@ static struct plat_serial8250_port ixdp425_uart_data[] = {
 		.mapbase	= IXP4XX_UART1_BASE_PHYS,
 		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
 		.irq		= IRQ_IXP4XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
 		.uartclk	= IXP4XX_UART_XTAL,
@@ -91,7 +91,7 @@ static struct plat_serial8250_port ixdp425_uart_data[] = {
 		.mapbase	= IXP4XX_UART2_BASE_PHYS,
 		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 		.irq		= IRQ_IXP4XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
 		.uartclk	= IXP4XX_UART_XTAL,
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 1e7f343822d0..e9182242da95 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -30,6 +30,7 @@
  *     28-Jun-2005 BJD  Moved pm functionality out to common code
  *     17-Jul-2005 BJD  Changed to platform device for SuperIO 16550s
  *     25-Jul-2005 BJD  Removed ASIX static mappings
+ *     27-Jul-2005 BJD  Ensure maximum frequency of i2c bus
 */
 
 #include <linux/kernel.h>
@@ -60,6 +61,7 @@
 #include <asm/arch/regs-mem.h>
 #include <asm/arch/regs-lcd.h>
 #include <asm/arch/nand.h>
+#include <asm/arch/iic.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -304,7 +306,7 @@ static void bast_nand_select(struct s3c2410_nand_set *set, int slot)
 }
 
 static struct s3c2410_platform_nand bast_nand_info = {
-	.tacls		= 80,
+	.tacls		= 40,
 	.twrph0		= 80,
 	.twrph1		= 80,
 	.nr_sets	= ARRAY_SIZE(bast_nand_sets),
@@ -385,6 +387,17 @@ static struct platform_device bast_sio = {
 	},
 };
 
+/* we have devices on the bus which cannot work much over the
+ * standard 100KHz i2c bus frequency
+*/
+
+static struct s3c2410_platform_i2c bast_i2c_info = {
+	.flags		= 0,
+	.slave_addr	= 0x10,
+	.bus_freq	= 100*1000,
+	.max_freq	= 130*1000,
+};
+
 /* Standard BAST devices */
 
 static struct platform_device *bast_devices[] __initdata = {
@@ -431,6 +444,7 @@ void __init bast_map_io(void)
 	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
 
 	s3c_device_nand.dev.platform_data = &bast_nand_info;
+	s3c_device_i2c.dev.platform_data = &bast_i2c_info;
 
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
 	s3c24xx_init_clocks(0);
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index eee3cbc5ec4f..2f497112c96a 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -97,6 +97,7 @@ static void __init jornada720_map_io(void)
 }
 
 MACHINE_START(JORNADA720, "HP Jornada 720")
+	/* Maintainer: Michael Gernoth <michael@gernoth.net> */
 	.phys_ram	= 0xc0000000,
 	.phys_io	= 0x80000000,
 	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 65bfe84b6d67..0b6c4db44e08 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -238,9 +238,9 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	up_read(&mm->mmap_sem);
 
 	/*
-	 * Handle the "normal" case first
+	 * Handle the "normal" case first - VM_FAULT_MAJOR / VM_FAULT_MINOR
 	 */
-	if (fault > 0)
+	if (fault >= VM_FAULT_MINOR)
 		return 0;
 
 	/*
@@ -261,7 +261,7 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 		do_exit(SIGKILL);
 		return 0;
 
-	case 0:
+	case VM_FAULT_SIGBUS:
 		/*
 		 * We had some memory, but were unable to
 		 * successfully fix up this page fault.
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 2d977b4eeeab..b88de2700146 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -370,142 +370,6 @@ ENTRY(cpu_xscale_dcache_clean_area)
 	bhi	1b
 	mov	pc, lr
 
-/* ================================ CACHE LOCKING============================
- *
- * The XScale MicroArchitecture implements support for locking entries into
- * the data and instruction cache.  The following functions implement the core
- * low level instructions needed to accomplish the locking.  The developer's
- * manual states that the code that performs the locking must be in non-cached
- * memory.  To accomplish this, the code in xscale-cache-lock.c copies the
- * following functions from the cache into a non-cached memory region that
- * is allocated through consistent_alloc().
- *
- */
-	.align	5
-/*
- * xscale_icache_lock
- *
- * r0: starting address to lock
- * r1: end address to lock
- */
-ENTRY(xscale_icache_lock)
-
-iLockLoop:
-	bic	r0, r0, #CACHELINESIZE - 1
-	mcr	p15, 0, r0, c9, c1, 0	@ lock into cache
-	cmp	r0, r1			@ are we done?
-	add	r0, r0, #CACHELINESIZE	@ advance to next cache line
-	bls	iLockLoop
-	mov	pc, lr
-
-/*
- * xscale_icache_unlock
- */
-ENTRY(xscale_icache_unlock)
-	mcr	p15, 0, r0, c9, c1, 1	@ Unlock icache
-	mov	pc, lr
-
-/*
- * xscale_dcache_lock
- *
- * r0: starting address to lock
- * r1: end address to lock
- */
-ENTRY(xscale_dcache_lock)
-	mcr	p15, 0, ip, c7, c10, 4		@ Drain Write (& Fill) Buffer
-	mov	r2, #1
-	mcr	p15, 0, r2, c9, c2, 0	@ Put dcache in lock mode
-	cpwait	ip			@ Wait for completion
-
-	mrs	r2, cpsr
-	orr	r3, r2, #PSR_F_BIT | PSR_I_BIT
-dLockLoop:
-	msr	cpsr_c, r3
-	mcr	p15, 0, r0, c7, c10, 1	@ Write back line if it is dirty
-	mcr	p15, 0, r0, c7, c6, 1	@ Flush/invalidate line
-	msr	cpsr_c, r2
-	ldr	ip, [r0], #CACHELINESIZE @ Preload 32 bytes into cache from
-					@ location [r0]. Post-increment
-					@ r3 to next cache line
-	cmp	r0, r1			@ Are we done?
-	bls	dLockLoop
-
-	mcr	p15, 0, ip, c7, c10, 4		@ Drain Write (& Fill) Buffer
-	mov	r2, #0
-	mcr	p15, 0, r2, c9, c2, 0	@ Get out of lock mode
-	cpwait_ret lr, ip
-
-/*
- * xscale_dcache_unlock
- */
-ENTRY(xscale_dcache_unlock)
-	mcr	p15, 0, ip, c7, c10, 4		@ Drain Write (& Fill) Buffer
-	mcr	p15, 0, ip, c9, c2, 1	@ Unlock cache
-	mov	pc, lr
-
-/*
- * Needed to determine the length of the code that needs to be copied.
- */
-	.align	5
-ENTRY(xscale_cache_dummy)
-	mov	pc, lr
-
-/* ================================ TLB LOCKING==============================
- *
- * The XScale MicroArchitecture implements support for locking entries into
- * the Instruction and Data TLBs.  The following functions provide the
- * low level support for supporting these under Linux.  xscale-lock.c
- * implements some higher level management code.  Most of the following
- * is taken straight out of the Developer's Manual.
- */
-
-/*
- * Lock I-TLB entry
- *
- * r0: Virtual address to translate and lock
- */
-	.align	5
-ENTRY(xscale_itlb_lock)
-	mrs	r2, cpsr
-	orr	r3, r2, #PSR_F_BIT | PSR_I_BIT
-	msr	cpsr_c, r3			@ Disable interrupts
-	mcr	p15, 0, r0, c8, c5, 1		@ Invalidate I-TLB entry
-	mcr	p15, 0, r0, c10, c4, 0		@ Translate and lock
-	msr	cpsr_c, r2			@ Restore interrupts
-	cpwait_ret lr, ip
-
-/*
- * Lock D-TLB entry
- *
- * r0: Virtual address to translate and lock
- */
-	.align	5
-ENTRY(xscale_dtlb_lock)
-	mrs	r2, cpsr
-	orr	r3, r2, #PSR_F_BIT | PSR_I_BIT
-	msr	cpsr_c, r3			@ Disable interrupts
-	mcr	p15, 0, r0, c8, c6, 1		@ Invalidate D-TLB entry
-	mcr	p15, 0, r0, c10, c8, 0		@ Translate and lock
-	msr	cpsr_c, r2			@ Restore interrupts
-	cpwait_ret lr, ip
-
-/*
- * Unlock all I-TLB entries
- */
-	.align	5
-ENTRY(xscale_itlb_unlock)
-	mcr	p15, 0, ip, c10, c4, 1		@ Unlock I-TLB
-	mcr	p15, 0, ip, c8, c5, 0		@ Invalidate I-TLB
-	cpwait_ret lr, ip
-
-/*
- * Unlock all D-TLB entries
- */
-ENTRY(xscale_dtlb_unlock)
-	mcr	p15, 0, ip, c10, c8, 1		@ Unlock D-TBL
-	mcr	p15, 0, ip, c8, c6, 0		@ Invalidate D-TLB
-	cpwait_ret lr, ip
-
 /* =============================== PageTable ============================== */
 
 #define PTE_CACHE_WRITE_ALLOCATE 0
diff --git a/arch/arm/nwfpe/double_cpdo.c b/arch/arm/nwfpe/double_cpdo.c
index 7ffd8cb9bc96..c51d1386a97c 100644
--- a/arch/arm/nwfpe/double_cpdo.c
+++ b/arch/arm/nwfpe/double_cpdo.c
@@ -40,17 +40,17 @@ float64 float64_arccos(float64 rFm);
 float64 float64_pow(float64 rFn, float64 rFm);
 float64 float64_pol(float64 rFn, float64 rFm);
 
-static float64 float64_rsf(float64 rFn, float64 rFm)
+static float64 float64_rsf(struct roundingData *roundData, float64 rFn, float64 rFm)
 {
-	return float64_sub(rFm, rFn);
+	return float64_sub(roundData, rFm, rFn);
 }
 
-static float64 float64_rdv(float64 rFn, float64 rFm)
+static float64 float64_rdv(struct roundingData *roundData, float64 rFn, float64 rFm)
 {
-	return float64_div(rFm, rFn);
+	return float64_div(roundData, rFm, rFn);
 }
 
-static float64 (*const dyadic_double[16])(float64 rFn, float64 rFm) = {
+static float64 (*const dyadic_double[16])(struct roundingData*, float64 rFn, float64 rFm) = {
 	[ADF_CODE >> 20] = float64_add,
 	[MUF_CODE >> 20] = float64_mul,
 	[SUF_CODE >> 20] = float64_sub,
@@ -65,12 +65,12 @@ static float64 (*const dyadic_double[16])(float64 rFn, float64 rFm) = {
 	[FRD_CODE >> 20] = float64_rdv,
 };
 
-static float64 float64_mvf(float64 rFm)
+static float64 float64_mvf(struct roundingData *roundData,float64 rFm)
 {
 	return rFm;
 }
 
-static float64 float64_mnf(float64 rFm)
+static float64 float64_mnf(struct roundingData *roundData,float64 rFm)
 {
 	union float64_components u;
 
@@ -84,7 +84,7 @@ static float64 float64_mnf(float64 rFm)
 	return u.f64;
 }
 
-static float64 float64_abs(float64 rFm)
+static float64 float64_abs(struct roundingData *roundData,float64 rFm)
 {
 	union float64_components u;
 
@@ -98,7 +98,7 @@ static float64 float64_abs(float64 rFm)
 	return u.f64;
 }
 
-static float64 (*const monadic_double[16])(float64 rFm) = {
+static float64 (*const monadic_double[16])(struct roundingData *, float64 rFm) = {
 	[MVF_CODE >> 20] = float64_mvf,
 	[MNF_CODE >> 20] = float64_mnf,
 	[ABS_CODE >> 20] = float64_abs,
@@ -108,7 +108,7 @@ static float64 (*const monadic_double[16])(float64 rFm) = {
 	[NRM_CODE >> 20] = float64_mvf,
 };
 
-unsigned int DoubleCPDO(const unsigned int opcode, FPREG * rFd)
+unsigned int DoubleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd)
 {
 	FPA11 *fpa11 = GET_FPA11();
 	float64 rFm;
@@ -151,13 +151,13 @@ unsigned int DoubleCPDO(const unsigned int opcode, FPREG * rFd)
 		}
 
 		if (dyadic_double[opc_mask_shift]) {
-			rFd->fDouble = dyadic_double[opc_mask_shift](rFn, rFm);
+			rFd->fDouble = dyadic_double[opc_mask_shift](roundData, rFn, rFm);
 		} else {
 			return 0;
 		}
 	} else {
 		if (monadic_double[opc_mask_shift]) {
-			rFd->fDouble = monadic_double[opc_mask_shift](rFm);
+			rFd->fDouble = monadic_double[opc_mask_shift](roundData, rFm);
 		} else {
 			return 0;
 		}
diff --git a/arch/arm/nwfpe/extended_cpdo.c b/arch/arm/nwfpe/extended_cpdo.c
index c39f68a3449e..65a279ba927f 100644
--- a/arch/arm/nwfpe/extended_cpdo.c
+++ b/arch/arm/nwfpe/extended_cpdo.c
@@ -35,17 +35,17 @@ floatx80 floatx80_arccos(floatx80 rFm);
 floatx80 floatx80_pow(floatx80 rFn, floatx80 rFm);
 floatx80 floatx80_pol(floatx80 rFn, floatx80 rFm);
 
-static floatx80 floatx80_rsf(floatx80 rFn, floatx80 rFm)
+static floatx80 floatx80_rsf(struct roundingData *roundData, floatx80 rFn, floatx80 rFm)
 {
-	return floatx80_sub(rFm, rFn);
+	return floatx80_sub(roundData, rFm, rFn);
 }
 
-static floatx80 floatx80_rdv(floatx80 rFn, floatx80 rFm)
+static floatx80 floatx80_rdv(struct roundingData *roundData, floatx80 rFn, floatx80 rFm)
 {
-	return floatx80_div(rFm, rFn);
+	return floatx80_div(roundData, rFm, rFn);
 }
 
-static floatx80 (*const dyadic_extended[16])(floatx80 rFn, floatx80 rFm) = {
+static floatx80 (*const dyadic_extended[16])(struct roundingData*, floatx80 rFn, floatx80 rFm) = {
 	[ADF_CODE >> 20] = floatx80_add,
 	[MUF_CODE >> 20] = floatx80_mul,
 	[SUF_CODE >> 20] = floatx80_sub,
@@ -60,24 +60,24 @@ static floatx80 (*const dyadic_extended[16])(floatx80 rFn, floatx80 rFm) = {
 	[FRD_CODE >> 20] = floatx80_rdv,
 };
 
-static floatx80 floatx80_mvf(floatx80 rFm)
+static floatx80 floatx80_mvf(struct roundingData *roundData, floatx80 rFm)
 {
 	return rFm;
 }
 
-static floatx80 floatx80_mnf(floatx80 rFm)
+static floatx80 floatx80_mnf(struct roundingData *roundData, floatx80 rFm)
 {
 	rFm.high ^= 0x8000;
 	return rFm;
 }
 
-static floatx80 floatx80_abs(floatx80 rFm)
+static floatx80 floatx80_abs(struct roundingData *roundData, floatx80 rFm)
 {
 	rFm.high &= 0x7fff;
 	return rFm;
 }
 
-static floatx80 (*const monadic_extended[16])(floatx80 rFm) = {
+static floatx80 (*const monadic_extended[16])(struct roundingData*, floatx80 rFm) = {
 	[MVF_CODE >> 20] = floatx80_mvf,
 	[MNF_CODE >> 20] = floatx80_mnf,
 	[ABS_CODE >> 20] = floatx80_abs,
@@ -87,7 +87,7 @@ static floatx80 (*const monadic_extended[16])(floatx80 rFm) = {
 	[NRM_CODE >> 20] = floatx80_mvf,
 };
 
-unsigned int ExtendedCPDO(const unsigned int opcode, FPREG * rFd)
+unsigned int ExtendedCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd)
 {
 	FPA11 *fpa11 = GET_FPA11();
 	floatx80 rFm;
@@ -138,13 +138,13 @@ unsigned int ExtendedCPDO(const unsigned int opcode, FPREG * rFd)
 		}
 
 		if (dyadic_extended[opc_mask_shift]) {
-			rFd->fExtended = dyadic_extended[opc_mask_shift](rFn, rFm);
+			rFd->fExtended = dyadic_extended[opc_mask_shift](roundData, rFn, rFm);
 		} else {
 			return 0;
 		}
 	} else {
 		if (monadic_extended[opc_mask_shift]) {
-			rFd->fExtended = monadic_extended[opc_mask_shift](rFm);
+			rFd->fExtended = monadic_extended[opc_mask_shift](roundData, rFm);
 		} else {
 			return 0;
 		}
diff --git a/arch/arm/nwfpe/fpa11.c b/arch/arm/nwfpe/fpa11.c
index bf61696865ec..7690f731ee87 100644
--- a/arch/arm/nwfpe/fpa11.c
+++ b/arch/arm/nwfpe/fpa11.c
@@ -51,48 +51,42 @@ static void resetFPA11(void)
 	fpa11->fpsr = FP_EMULATOR | BIT_AC;
 }
 
-void SetRoundingMode(const unsigned int opcode)
+int8 SetRoundingMode(const unsigned int opcode)
 {
 	switch (opcode & MASK_ROUNDING_MODE) {
 	default:
 	case ROUND_TO_NEAREST:
-		float_rounding_mode = float_round_nearest_even;
-		break;
+		return float_round_nearest_even;
 
 	case ROUND_TO_PLUS_INFINITY:
-		float_rounding_mode = float_round_up;
-		break;
+		return float_round_up;
 
 	case ROUND_TO_MINUS_INFINITY:
-		float_rounding_mode = float_round_down;
-		break;
+		return float_round_down;
 
 	case ROUND_TO_ZERO:
-		float_rounding_mode = float_round_to_zero;
-		break;
+		return float_round_to_zero;
 	}
 }
 
-void SetRoundingPrecision(const unsigned int opcode)
+int8 SetRoundingPrecision(const unsigned int opcode)
 {
 #ifdef CONFIG_FPE_NWFPE_XP
 	switch (opcode & MASK_ROUNDING_PRECISION) {
 	case ROUND_SINGLE:
-		floatx80_rounding_precision = 32;
-		break;
+		return 32;
 
 	case ROUND_DOUBLE:
-		floatx80_rounding_precision = 64;
-		break;
+		return 64;
 
 	case ROUND_EXTENDED:
-		floatx80_rounding_precision = 80;
-		break;
+		return 80;
 
 	default:
-		floatx80_rounding_precision = 80;
+		return 80;
 	}
 #endif
+	return 80;
 }
 
 void nwfpe_init_fpa(union fp_state *fp)
@@ -103,8 +97,6 @@ void nwfpe_init_fpa(union fp_state *fp)
 #endif
  	memset(fpa11, 0, sizeof(FPA11));
 	resetFPA11();
-	SetRoundingMode(ROUND_TO_NEAREST);
-	SetRoundingPrecision(ROUND_EXTENDED);
 	fpa11->initflag = 1;
 }
 
diff --git a/arch/arm/nwfpe/fpa11.h b/arch/arm/nwfpe/fpa11.h
index e4a61aea534b..93523ae4b7a1 100644
--- a/arch/arm/nwfpe/fpa11.h
+++ b/arch/arm/nwfpe/fpa11.h
@@ -37,6 +37,13 @@
 /* includes */
 #include "fpsr.h"		/* FP control and status register definitions */
 #include "milieu.h"
+
+struct roundingData {
+    int8 mode;
+    int8 precision;
+    signed char exception;
+};
+
 #include "softfloat.h"
 
 #define		typeNone		0x00
@@ -84,8 +91,8 @@ typedef struct tagFPA11 {
 				   initialised. */
 } FPA11;
 
-extern void SetRoundingMode(const unsigned int);
-extern void SetRoundingPrecision(const unsigned int);
+extern int8 SetRoundingMode(const unsigned int);
+extern int8 SetRoundingPrecision(const unsigned int);
 extern void nwfpe_init_fpa(union fp_state *fp);
 
 #endif
diff --git a/arch/arm/nwfpe/fpa11_cpdo.c b/arch/arm/nwfpe/fpa11_cpdo.c
index 1bea67437b6f..4a31dfd94068 100644
--- a/arch/arm/nwfpe/fpa11_cpdo.c
+++ b/arch/arm/nwfpe/fpa11_cpdo.c
@@ -24,15 +24,16 @@
 #include "fpa11.h"
 #include "fpopcode.h"
 
-unsigned int SingleCPDO(const unsigned int opcode, FPREG * rFd);
-unsigned int DoubleCPDO(const unsigned int opcode, FPREG * rFd);
-unsigned int ExtendedCPDO(const unsigned int opcode, FPREG * rFd);
+unsigned int SingleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd);
+unsigned int DoubleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd);
+unsigned int ExtendedCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd);
 
 unsigned int EmulateCPDO(const unsigned int opcode)
 {
 	FPA11 *fpa11 = GET_FPA11();
 	FPREG *rFd;
 	unsigned int nType, nDest, nRc;
+	struct roundingData roundData;
 
 	/* Get the destination size.  If not valid let Linux perform
 	   an invalid instruction trap. */
@@ -40,7 +41,9 @@ unsigned int EmulateCPDO(const unsigned int opcode)
 	if (typeNone == nDest)
 		return 0;
 
-	SetRoundingMode(opcode);
+	roundData.mode = SetRoundingMode(opcode);
+	roundData.precision = SetRoundingPrecision(opcode);
+	roundData.exception = 0;
 
 	/* Compare the size of the operands in Fn and Fm.
 	   Choose the largest size and perform operations in that size,
@@ -63,14 +66,14 @@ unsigned int EmulateCPDO(const unsigned int opcode)
 
 	switch (nType) {
 	case typeSingle:
-		nRc = SingleCPDO(opcode, rFd);
+		nRc = SingleCPDO(&roundData, opcode, rFd);
 		break;
 	case typeDouble:
-		nRc = DoubleCPDO(opcode, rFd);
+		nRc = DoubleCPDO(&roundData, opcode, rFd);
 		break;
 #ifdef CONFIG_FPE_NWFPE_XP
 	case typeExtended:
-		nRc = ExtendedCPDO(opcode, rFd);
+		nRc = ExtendedCPDO(&roundData, opcode, rFd);
 		break;
 #endif
 	default:
@@ -93,9 +96,9 @@ unsigned int EmulateCPDO(const unsigned int opcode)
 			case typeSingle:
 				{
 					if (typeDouble == nType)
-						rFd->fSingle = float64_to_float32(rFd->fDouble);
+						rFd->fSingle = float64_to_float32(&roundData, rFd->fDouble);
 					else
-						rFd->fSingle = floatx80_to_float32(rFd->fExtended);
+						rFd->fSingle = floatx80_to_float32(&roundData, rFd->fExtended);
 				}
 				break;
 
@@ -104,7 +107,7 @@ unsigned int EmulateCPDO(const unsigned int opcode)
 					if (typeSingle == nType)
 						rFd->fDouble = float32_to_float64(rFd->fSingle);
 					else
-						rFd->fDouble = floatx80_to_float64(rFd->fExtended);
+						rFd->fDouble = floatx80_to_float64(&roundData, rFd->fExtended);
 				}
 				break;
 
@@ -121,12 +124,15 @@ unsigned int EmulateCPDO(const unsigned int opcode)
 #else
 		if (nDest != nType) {
 			if (nDest == typeSingle)
-				rFd->fSingle = float64_to_float32(rFd->fDouble);
+				rFd->fSingle = float64_to_float32(&roundData, rFd->fDouble);
 			else
 				rFd->fDouble = float32_to_float64(rFd->fSingle);
 		}
 #endif
 	}
 
+	if (roundData.exception)
+		float_raise(roundData.exception);
+
 	return nRc;
 }
diff --git a/arch/arm/nwfpe/fpa11_cpdt.c b/arch/arm/nwfpe/fpa11_cpdt.c
index 95fb63fa9d18..b0db5cbcc3b1 100644
--- a/arch/arm/nwfpe/fpa11_cpdt.c
+++ b/arch/arm/nwfpe/fpa11_cpdt.c
@@ -96,7 +96,7 @@ static inline void loadMultiple(const unsigned int Fn, const unsigned int __user
 	}
 }
 
-static inline void storeSingle(const unsigned int Fn, unsigned int __user *pMem)
+static inline void storeSingle(struct roundingData *roundData, const unsigned int Fn, unsigned int __user *pMem)
 {
 	FPA11 *fpa11 = GET_FPA11();
 	union {
@@ -106,12 +106,12 @@ static inline void storeSingle(const unsigned int Fn, unsigned int __user *pMem)
 
 	switch (fpa11->fType[Fn]) {
 	case typeDouble:
-		val.f = float64_to_float32(fpa11->fpreg[Fn].fDouble);
+		val.f = float64_to_float32(roundData, fpa11->fpreg[Fn].fDouble);
 		break;
 
 #ifdef CONFIG_FPE_NWFPE_XP
 	case typeExtended:
-		val.f = floatx80_to_float32(fpa11->fpreg[Fn].fExtended);
+		val.f = floatx80_to_float32(roundData, fpa11->fpreg[Fn].fExtended);
 		break;
 #endif
 
@@ -122,7 +122,7 @@ static inline void storeSingle(const unsigned int Fn, unsigned int __user *pMem)
 	put_user(val.i[0], pMem);
 }
 
-static inline void storeDouble(const unsigned int Fn, unsigned int __user *pMem)
+static inline void storeDouble(struct roundingData *roundData, const unsigned int Fn, unsigned int __user *pMem)
 {
 	FPA11 *fpa11 = GET_FPA11();
 	union {
@@ -137,7 +137,7 @@ static inline void storeDouble(const unsigned int Fn, unsigned int __user *pMem)
 
 #ifdef CONFIG_FPE_NWFPE_XP
 	case typeExtended:
-		val.f = floatx80_to_float64(fpa11->fpreg[Fn].fExtended);
+		val.f = floatx80_to_float64(roundData, fpa11->fpreg[Fn].fExtended);
 		break;
 #endif
 
@@ -259,8 +259,11 @@ unsigned int PerformSTF(const unsigned int opcode)
 {
 	unsigned int __user *pBase, *pAddress, *pFinal;
 	unsigned int nRc = 1, write_back = WRITE_BACK(opcode);
+	struct roundingData roundData;
 
-	SetRoundingMode(ROUND_TO_NEAREST);
+	roundData.mode = SetRoundingMode(opcode);
+	roundData.precision = SetRoundingPrecision(opcode);
+	roundData.exception = 0;
 
 	pBase = (unsigned int __user *) readRegister(getRn(opcode));
 	if (REG_PC == getRn(opcode)) {
@@ -281,10 +284,10 @@ unsigned int PerformSTF(const unsigned int opcode)
 
 	switch (opcode & MASK_TRANSFER_LENGTH) {
 	case TRANSFER_SINGLE:
-		storeSingle(getFd(opcode), pAddress);
+		storeSingle(&roundData, getFd(opcode), pAddress);
 		break;
 	case TRANSFER_DOUBLE:
-		storeDouble(getFd(opcode), pAddress);
+		storeDouble(&roundData, getFd(opcode), pAddress);
 		break;
 #ifdef CONFIG_FPE_NWFPE_XP
 	case TRANSFER_EXTENDED:
@@ -295,6 +298,9 @@ unsigned int PerformSTF(const unsigned int opcode)
 		nRc = 0;
 	}
 
+	if (roundData.exception)
+		float_raise(roundData.exception);
+
 	if (write_back)
 		writeRegister(getRn(opcode), (unsigned long) pFinal);
 	return nRc;
diff --git a/arch/arm/nwfpe/fpa11_cprt.c b/arch/arm/nwfpe/fpa11_cprt.c
index db01fbc97216..adf8d3000540 100644
--- a/arch/arm/nwfpe/fpa11_cprt.c
+++ b/arch/arm/nwfpe/fpa11_cprt.c
@@ -33,8 +33,6 @@ extern flag floatx80_is_nan(floatx80);
 extern flag float64_is_nan(float64);
 extern flag float32_is_nan(float32);
 
-void SetRoundingMode(const unsigned int opcode);
-
 unsigned int PerformFLT(const unsigned int opcode);
 unsigned int PerformFIX(const unsigned int opcode);
 
@@ -77,14 +75,17 @@ unsigned int EmulateCPRT(const unsigned int opcode)
 unsigned int PerformFLT(const unsigned int opcode)
 {
 	FPA11 *fpa11 = GET_FPA11();
-	SetRoundingMode(opcode);
-	SetRoundingPrecision(opcode);
+	struct roundingData roundData;
+
+	roundData.mode = SetRoundingMode(opcode);
+	roundData.precision = SetRoundingPrecision(opcode);
+	roundData.exception = 0;
 
 	switch (opcode & MASK_ROUNDING_PRECISION) {
 	case ROUND_SINGLE:
 		{
 			fpa11->fType[getFn(opcode)] = typeSingle;
-			fpa11->fpreg[getFn(opcode)].fSingle = int32_to_float32(readRegister(getRd(opcode)));
+			fpa11->fpreg[getFn(opcode)].fSingle = int32_to_float32(&roundData, readRegister(getRd(opcode)));
 		}
 		break;
 
@@ -108,6 +109,9 @@ unsigned int PerformFLT(const unsigned int opcode)
 		return 0;
 	}
 
+	if (roundData.exception)
+		float_raise(roundData.exception);
+
 	return 1;
 }
 
@@ -115,26 +119,29 @@ unsigned int PerformFIX(const unsigned int opcode)
 {
 	FPA11 *fpa11 = GET_FPA11();
 	unsigned int Fn = getFm(opcode);
+	struct roundingData roundData;
 
-	SetRoundingMode(opcode);
+	roundData.mode = SetRoundingMode(opcode);
+	roundData.precision = SetRoundingPrecision(opcode);
+	roundData.exception = 0;
 
 	switch (fpa11->fType[Fn]) {
 	case typeSingle:
 		{
-			writeRegister(getRd(opcode), float32_to_int32(fpa11->fpreg[Fn].fSingle));
+			writeRegister(getRd(opcode), float32_to_int32(&roundData, fpa11->fpreg[Fn].fSingle));
 		}
 		break;
 
 	case typeDouble:
 		{
-			writeRegister(getRd(opcode), float64_to_int32(fpa11->fpreg[Fn].fDouble));
+			writeRegister(getRd(opcode), float64_to_int32(&roundData, fpa11->fpreg[Fn].fDouble));
 		}
 		break;
 
 #ifdef CONFIG_FPE_NWFPE_XP
 	case typeExtended:
 		{
-			writeRegister(getRd(opcode), floatx80_to_int32(fpa11->fpreg[Fn].fExtended));
+			writeRegister(getRd(opcode), floatx80_to_int32(&roundData, fpa11->fpreg[Fn].fExtended));
 		}
 		break;
 #endif
@@ -143,6 +150,9 @@ unsigned int PerformFIX(const unsigned int opcode)
 		return 0;
 	}
 
+	if (roundData.exception)
+		float_raise(roundData.exception);
+
 	return 1;
 }
 
diff --git a/arch/arm/nwfpe/fpmodule.c b/arch/arm/nwfpe/fpmodule.c
index 12885f31d347..2dfe1ac42ee8 100644
--- a/arch/arm/nwfpe/fpmodule.c
+++ b/arch/arm/nwfpe/fpmodule.c
@@ -116,8 +116,6 @@ fpmodule.c to integrate with the NetBSD kernel (I hope!).
 code to access data in user space in some other source files at the 
 moment (grep for get_user / put_user calls).  --philb]
 
-float_exception_flags is a global variable in SoftFloat.
-
 This function is called by the SoftFloat routines to raise a floating
 point exception.  We check the trap enable byte in the FPSR, and raise
 a SIGFPE exception if necessary.  If not the relevant bits in the 
@@ -129,15 +127,14 @@ void float_raise(signed char flags)
 	register unsigned int fpsr, cumulativeTraps;
 
 #ifdef CONFIG_DEBUG_USER
-	printk(KERN_DEBUG
-	       "NWFPE: %s[%d] takes exception %08x at %p from %08lx\n",
-	       current->comm, current->pid, flags,
-	       __builtin_return_address(0), GET_USERREG()->ARM_pc);
+ 	/* Ignore inexact errors as there are far too many of them to log */
+ 	if (flags & ~BIT_IXC)
+ 		printk(KERN_DEBUG
+		       "NWFPE: %s[%d] takes exception %08x at %p from %08lx\n",
+		       current->comm, current->pid, flags,
+		       __builtin_return_address(0), GET_USERREG()->ARM_pc);
 #endif
 
-	/* Keep SoftFloat exception flags up to date.  */
-	float_exception_flags |= flags;
-
 	/* Read fpsr and initialize the cumulativeTraps.  */
 	fpsr = readFPSR();
 	cumulativeTraps = 0;
diff --git a/arch/arm/nwfpe/single_cpdo.c b/arch/arm/nwfpe/single_cpdo.c
index 705808e88d9d..c66981d682cf 100644
--- a/arch/arm/nwfpe/single_cpdo.c
+++ b/arch/arm/nwfpe/single_cpdo.c
@@ -36,17 +36,17 @@ float32 float32_arccos(float32 rFm);
 float32 float32_pow(float32 rFn, float32 rFm);
 float32 float32_pol(float32 rFn, float32 rFm);
 
-static float32 float32_rsf(float32 rFn, float32 rFm)
+static float32 float32_rsf(struct roundingData *roundData, float32 rFn, float32 rFm)
 {
-	return float32_sub(rFm, rFn);
+	return float32_sub(roundData, rFm, rFn);
 }
 
-static float32 float32_rdv(float32 rFn, float32 rFm)
+static float32 float32_rdv(struct roundingData *roundData, float32 rFn, float32 rFm)
 {
-	return float32_div(rFm, rFn);
+	return float32_div(roundData, rFm, rFn);
 }
 
-static float32 (*const dyadic_single[16])(float32 rFn, float32 rFm) = {
+static float32 (*const dyadic_single[16])(struct roundingData *, float32 rFn, float32 rFm) = {
 	[ADF_CODE >> 20] = float32_add,
 	[MUF_CODE >> 20] = float32_mul,
 	[SUF_CODE >> 20] = float32_sub,
@@ -60,22 +60,22 @@ static float32 (*const dyadic_single[16])(float32 rFn, float32 rFm) = {
 	[FRD_CODE >> 20] = float32_rdv,
 };
 
-static float32 float32_mvf(float32 rFm)
+static float32 float32_mvf(struct roundingData *roundData, float32 rFm)
 {
 	return rFm;
 }
 
-static float32 float32_mnf(float32 rFm)
+static float32 float32_mnf(struct roundingData *roundData, float32 rFm)
 {
 	return rFm ^ 0x80000000;
 }
 
-static float32 float32_abs(float32 rFm)
+static float32 float32_abs(struct roundingData *roundData, float32 rFm)
 {
 	return rFm & 0x7fffffff;
 }
 
-static float32 (*const monadic_single[16])(float32 rFm) = {
+static float32 (*const monadic_single[16])(struct roundingData*, float32 rFm) = {
 	[MVF_CODE >> 20] = float32_mvf,
 	[MNF_CODE >> 20] = float32_mnf,
 	[ABS_CODE >> 20] = float32_abs,
@@ -85,7 +85,7 @@ static float32 (*const monadic_single[16])(float32 rFm) = {
 	[NRM_CODE >> 20] = float32_mvf,
 };
 
-unsigned int SingleCPDO(const unsigned int opcode, FPREG * rFd)
+unsigned int SingleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd)
 {
 	FPA11 *fpa11 = GET_FPA11();
 	float32 rFm;
@@ -108,13 +108,13 @@ unsigned int SingleCPDO(const unsigned int opcode, FPREG * rFd)
 		if (fpa11->fType[Fn] == typeSingle &&
 		    dyadic_single[opc_mask_shift]) {
 			rFn = fpa11->fpreg[Fn].fSingle;
-			rFd->fSingle = dyadic_single[opc_mask_shift](rFn, rFm);
+			rFd->fSingle = dyadic_single[opc_mask_shift](roundData, rFn, rFm);
 		} else {
 			return 0;
 		}
 	} else {
 		if (monadic_single[opc_mask_shift]) {
-			rFd->fSingle = monadic_single[opc_mask_shift](rFm);
+			rFd->fSingle = monadic_single[opc_mask_shift](roundData, rFm);
 		} else {
 			return 0;
 		}
diff --git a/arch/arm/nwfpe/softfloat.c b/arch/arm/nwfpe/softfloat.c
index e038dd3be9b3..8b75a6e7cb3a 100644
--- a/arch/arm/nwfpe/softfloat.c
+++ b/arch/arm/nwfpe/softfloat.c
@@ -36,16 +36,6 @@ this code that are retained.
 
 /*
 -------------------------------------------------------------------------------
-Floating-point rounding mode, extended double-precision rounding precision,
-and exception flags.
--------------------------------------------------------------------------------
-*/
-int8 float_rounding_mode = float_round_nearest_even;
-int8 floatx80_rounding_precision = 80;
-int8 float_exception_flags;
-
-/*
--------------------------------------------------------------------------------
 Primitive arithmetic functions, including multi-word arithmetic, and
 division and square root approximations.  (Can be specialized to target if
 desired.)
@@ -77,14 +67,14 @@ input is too large, however, the invalid exception is raised and the largest
 positive or negative integer is returned.
 -------------------------------------------------------------------------------
 */
-static int32 roundAndPackInt32( flag zSign, bits64 absZ )
+static int32 roundAndPackInt32( struct roundingData *roundData, flag zSign, bits64 absZ )
 {
     int8 roundingMode;
     flag roundNearestEven;
     int8 roundIncrement, roundBits;
     int32 z;
 
-    roundingMode = float_rounding_mode;
+    roundingMode = roundData->mode;
     roundNearestEven = ( roundingMode == float_round_nearest_even );
     roundIncrement = 0x40;
     if ( ! roundNearestEven ) {
@@ -107,10 +97,10 @@ static int32 roundAndPackInt32( flag zSign, bits64 absZ )
     z = absZ;
     if ( zSign ) z = - z;
     if ( ( absZ>>32 ) || ( z && ( ( z < 0 ) ^ zSign ) ) ) {
-        float_exception_flags |= float_flag_invalid;
+        roundData->exception |= float_flag_invalid;
         return zSign ? 0x80000000 : 0x7FFFFFFF;
     }
-    if ( roundBits ) float_exception_flags |= float_flag_inexact;
+    if ( roundBits ) roundData->exception |= float_flag_inexact;
     return z;
 
 }
@@ -224,14 +214,14 @@ The handling of underflow and overflow follows the IEC/IEEE Standard for
 Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-static float32 roundAndPackFloat32( flag zSign, int16 zExp, bits32 zSig )
+static float32 roundAndPackFloat32( struct roundingData *roundData, flag zSign, int16 zExp, bits32 zSig )
 {
     int8 roundingMode;
     flag roundNearestEven;
     int8 roundIncrement, roundBits;
     flag isTiny;
 
-    roundingMode = float_rounding_mode;
+    roundingMode = roundData->mode;
     roundNearestEven = ( roundingMode == float_round_nearest_even );
     roundIncrement = 0x40;
     if ( ! roundNearestEven ) {
@@ -254,7 +244,7 @@ static float32 roundAndPackFloat32( flag zSign, int16 zExp, bits32 zSig )
              || (    ( zExp == 0xFD )
                   && ( (sbits32) ( zSig + roundIncrement ) < 0 ) )
            ) {
-            float_raise( float_flag_overflow | float_flag_inexact );
+            roundData->exception |= float_flag_overflow | float_flag_inexact;
             return packFloat32( zSign, 0xFF, 0 ) - ( roundIncrement == 0 );
         }
         if ( zExp < 0 ) {
@@ -265,10 +255,10 @@ static float32 roundAndPackFloat32( flag zSign, int16 zExp, bits32 zSig )
             shift32RightJamming( zSig, - zExp, &zSig );
             zExp = 0;
             roundBits = zSig & 0x7F;
-            if ( isTiny && roundBits ) float_raise( float_flag_underflow );
+            if ( isTiny && roundBits ) roundData->exception |= float_flag_underflow;
         }
     }
-    if ( roundBits ) float_exception_flags |= float_flag_inexact;
+    if ( roundBits ) roundData->exception |= float_flag_inexact;
     zSig = ( zSig + roundIncrement )>>7;
     zSig &= ~ ( ( ( roundBits ^ 0x40 ) == 0 ) & roundNearestEven );
     if ( zSig == 0 ) zExp = 0;
@@ -287,12 +277,12 @@ point exponent.
 -------------------------------------------------------------------------------
 */
 static float32
- normalizeRoundAndPackFloat32( flag zSign, int16 zExp, bits32 zSig )
+ normalizeRoundAndPackFloat32( struct roundingData *roundData, flag zSign, int16 zExp, bits32 zSig )
 {
     int8 shiftCount;
 
     shiftCount = countLeadingZeros32( zSig ) - 1;
-    return roundAndPackFloat32( zSign, zExp - shiftCount, zSig<<shiftCount );
+    return roundAndPackFloat32( roundData, zSign, zExp - shiftCount, zSig<<shiftCount );
 
 }
 
@@ -395,14 +385,14 @@ The handling of underflow and overflow follows the IEC/IEEE Standard for
 Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-static float64 roundAndPackFloat64( flag zSign, int16 zExp, bits64 zSig )
+static float64 roundAndPackFloat64( struct roundingData *roundData, flag zSign, int16 zExp, bits64 zSig )
 {
     int8 roundingMode;
     flag roundNearestEven;
     int16 roundIncrement, roundBits;
     flag isTiny;
 
-    roundingMode = float_rounding_mode;
+    roundingMode = roundData->mode;
     roundNearestEven = ( roundingMode == float_round_nearest_even );
     roundIncrement = 0x200;
     if ( ! roundNearestEven ) {
@@ -427,7 +417,7 @@ static float64 roundAndPackFloat64( flag zSign, int16 zExp, bits64 zSig )
            ) {
             //register int lr = __builtin_return_address(0);
             //printk("roundAndPackFloat64 called from 0x%08x\n",lr);
-            float_raise( float_flag_overflow | float_flag_inexact );
+            roundData->exception |= float_flag_overflow | float_flag_inexact;
             return packFloat64( zSign, 0x7FF, 0 ) - ( roundIncrement == 0 );
         }
         if ( zExp < 0 ) {
@@ -438,10 +428,10 @@ static float64 roundAndPackFloat64( flag zSign, int16 zExp, bits64 zSig )
             shift64RightJamming( zSig, - zExp, &zSig );
             zExp = 0;
             roundBits = zSig & 0x3FF;
-            if ( isTiny && roundBits ) float_raise( float_flag_underflow );
+            if ( isTiny && roundBits ) roundData->exception |= float_flag_underflow;
         }
     }
-    if ( roundBits ) float_exception_flags |= float_flag_inexact;
+    if ( roundBits ) roundData->exception |= float_flag_inexact;
     zSig = ( zSig + roundIncrement )>>10;
     zSig &= ~ ( ( ( roundBits ^ 0x200 ) == 0 ) & roundNearestEven );
     if ( zSig == 0 ) zExp = 0;
@@ -460,12 +450,12 @@ point exponent.
 -------------------------------------------------------------------------------
 */
 static float64
- normalizeRoundAndPackFloat64( flag zSign, int16 zExp, bits64 zSig )
+ normalizeRoundAndPackFloat64( struct roundingData *roundData, flag zSign, int16 zExp, bits64 zSig )
 {
     int8 shiftCount;
 
     shiftCount = countLeadingZeros64( zSig ) - 1;
-    return roundAndPackFloat64( zSign, zExp - shiftCount, zSig<<shiftCount );
+    return roundAndPackFloat64( roundData, zSign, zExp - shiftCount, zSig<<shiftCount );
 
 }
 
@@ -572,14 +562,15 @@ Floating-point Arithmetic.
 */
 static floatx80
  roundAndPackFloatx80(
-     int8 roundingPrecision, flag zSign, int32 zExp, bits64 zSig0, bits64 zSig1
+     struct roundingData *roundData, flag zSign, int32 zExp, bits64 zSig0, bits64 zSig1
  )
 {
-    int8 roundingMode;
+    int8 roundingMode, roundingPrecision;
     flag roundNearestEven, increment, isTiny;
     int64 roundIncrement, roundMask, roundBits;
 
-    roundingMode = float_rounding_mode;
+    roundingMode = roundData->mode;
+    roundingPrecision = roundData->precision;
     roundNearestEven = ( roundingMode == float_round_nearest_even );
     if ( roundingPrecision == 80 ) goto precision80;
     if ( roundingPrecision == 64 ) {
@@ -623,8 +614,8 @@ static floatx80
             shift64RightJamming( zSig0, 1 - zExp, &zSig0 );
             zExp = 0;
             roundBits = zSig0 & roundMask;
-            if ( isTiny && roundBits ) float_raise( float_flag_underflow );
-            if ( roundBits ) float_exception_flags |= float_flag_inexact;
+            if ( isTiny && roundBits ) roundData->exception |= float_flag_underflow;
+            if ( roundBits ) roundData->exception |= float_flag_inexact;
             zSig0 += roundIncrement;
             if ( (sbits64) zSig0 < 0 ) zExp = 1;
             roundIncrement = roundMask + 1;
@@ -635,7 +626,7 @@ static floatx80
             return packFloatx80( zSign, zExp, zSig0 );
         }
     }
-    if ( roundBits ) float_exception_flags |= float_flag_inexact;
+    if ( roundBits ) roundData->exception |= float_flag_inexact;
     zSig0 += roundIncrement;
     if ( zSig0 < roundIncrement ) {
         ++zExp;
@@ -672,7 +663,7 @@ static floatx80
            ) {
             roundMask = 0;
  overflow:
-            float_raise( float_flag_overflow | float_flag_inexact );
+            roundData->exception |= float_flag_overflow | float_flag_inexact;
             if (    ( roundingMode == float_round_to_zero )
                  || ( zSign && ( roundingMode == float_round_up ) )
                  || ( ! zSign && ( roundingMode == float_round_down ) )
@@ -689,8 +680,8 @@ static floatx80
                 || ( zSig0 < LIT64( 0xFFFFFFFFFFFFFFFF ) );
             shift64ExtraRightJamming( zSig0, zSig1, 1 - zExp, &zSig0, &zSig1 );
             zExp = 0;
-            if ( isTiny && zSig1 ) float_raise( float_flag_underflow );
-            if ( zSig1 ) float_exception_flags |= float_flag_inexact;
+            if ( isTiny && zSig1 ) roundData->exception |= float_flag_underflow;
+            if ( zSig1 ) roundData->exception |= float_flag_inexact;
             if ( roundNearestEven ) {
                 increment = ( (sbits64) zSig1 < 0 );
             }
@@ -710,7 +701,7 @@ static floatx80
             return packFloatx80( zSign, zExp, zSig0 );
         }
     }
-    if ( zSig1 ) float_exception_flags |= float_flag_inexact;
+    if ( zSig1 ) roundData->exception |= float_flag_inexact;
     if ( increment ) {
         ++zSig0;
         if ( zSig0 == 0 ) {
@@ -740,7 +731,7 @@ normalized.
 */
 static floatx80
  normalizeRoundAndPackFloatx80(
-     int8 roundingPrecision, flag zSign, int32 zExp, bits64 zSig0, bits64 zSig1
+     struct roundingData *roundData, flag zSign, int32 zExp, bits64 zSig0, bits64 zSig1
  )
 {
     int8 shiftCount;
@@ -754,7 +745,7 @@ static floatx80
     shortShift128Left( zSig0, zSig1, shiftCount, &zSig0, &zSig1 );
     zExp -= shiftCount;
     return
-        roundAndPackFloatx80( roundingPrecision, zSign, zExp, zSig0, zSig1 );
+        roundAndPackFloatx80( roundData, zSign, zExp, zSig0, zSig1 );
 
 }
 
@@ -767,14 +758,14 @@ the single-precision floating-point format.  The conversion is performed
 according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float32 int32_to_float32( int32 a )
+float32 int32_to_float32(struct roundingData *roundData, int32 a)
 {
     flag zSign;
 
     if ( a == 0 ) return 0;
     if ( a == 0x80000000 ) return packFloat32( 1, 0x9E, 0 );
     zSign = ( a < 0 );
-    return normalizeRoundAndPackFloat32( zSign, 0x9C, zSign ? - a : a );
+    return normalizeRoundAndPackFloat32( roundData, zSign, 0x9C, zSign ? - a : a );
 
 }
 
@@ -840,7 +831,7 @@ positive integer is returned.  Otherwise, if the conversion overflows, the
 largest integer with the same sign as `a' is returned.
 -------------------------------------------------------------------------------
 */
-int32 float32_to_int32( float32 a )
+int32 float32_to_int32( struct roundingData *roundData, float32 a )
 {
     flag aSign;
     int16 aExp, shiftCount;
@@ -856,7 +847,7 @@ int32 float32_to_int32( float32 a )
     zSig = aSig;
     zSig <<= 32;
     if ( 0 < shiftCount ) shift64RightJamming( zSig, shiftCount, &zSig );
-    return roundAndPackInt32( aSign, zSig );
+    return roundAndPackInt32( roundData, aSign, zSig );
 
 }
 
@@ -889,13 +880,13 @@ int32 float32_to_int32_round_to_zero( float32 a )
         return 0x80000000;
     }
     else if ( aExp <= 0x7E ) {
-        if ( aExp | aSig ) float_exception_flags |= float_flag_inexact;
+        if ( aExp | aSig ) float_raise( float_flag_inexact );
         return 0;
     }
     aSig = ( aSig | 0x00800000 )<<8;
     z = aSig>>( - shiftCount );
     if ( (bits32) ( aSig<<( shiftCount & 31 ) ) ) {
-        float_exception_flags |= float_flag_inexact;
+        float_raise( float_flag_inexact );
     }
     return aSign ? - z : z;
 
@@ -973,7 +964,7 @@ operation is performed according to the IEC/IEEE Standard for Binary
 Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float32 float32_round_to_int( float32 a )
+float32 float32_round_to_int( struct roundingData *roundData, float32 a )
 {
     flag aSign;
     int16 aExp;
@@ -988,11 +979,12 @@ float32 float32_round_to_int( float32 a )
         }
         return a;
     }
+    roundingMode = roundData->mode;
     if ( aExp <= 0x7E ) {
         if ( (bits32) ( a<<1 ) == 0 ) return a;
-        float_exception_flags |= float_flag_inexact;
+        roundData->exception |= float_flag_inexact;
         aSign = extractFloat32Sign( a );
-        switch ( float_rounding_mode ) {
+        switch ( roundingMode ) {
          case float_round_nearest_even:
             if ( ( aExp == 0x7E ) && extractFloat32Frac( a ) ) {
                 return packFloat32( aSign, 0x7F, 0 );
@@ -1009,7 +1001,6 @@ float32 float32_round_to_int( float32 a )
     lastBitMask <<= 0x96 - aExp;
     roundBitsMask = lastBitMask - 1;
     z = a;
-    roundingMode = float_rounding_mode;
     if ( roundingMode == float_round_nearest_even ) {
         z += lastBitMask>>1;
         if ( ( z & roundBitsMask ) == 0 ) z &= ~ lastBitMask;
@@ -1020,7 +1011,7 @@ float32 float32_round_to_int( float32 a )
         }
     }
     z &= ~ roundBitsMask;
-    if ( z != a ) float_exception_flags |= float_flag_inexact;
+    if ( z != a ) roundData->exception |= float_flag_inexact;
     return z;
 
 }
@@ -1034,7 +1025,7 @@ addition is performed according to the IEC/IEEE Standard for Binary
 Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-static float32 addFloat32Sigs( float32 a, float32 b, flag zSign )
+static float32 addFloat32Sigs( struct roundingData *roundData, float32 a, float32 b, flag zSign )
 {
     int16 aExp, bExp, zExp;
     bits32 aSig, bSig, zSig;
@@ -1093,7 +1084,7 @@ static float32 addFloat32Sigs( float32 a, float32 b, flag zSign )
         ++zExp;
     }
  roundAndPack:
-    return roundAndPackFloat32( zSign, zExp, zSig );
+    return roundAndPackFloat32( roundData, zSign, zExp, zSig );
 
 }
 
@@ -1106,7 +1097,7 @@ result is a NaN.  The subtraction is performed according to the IEC/IEEE
 Standard for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-static float32 subFloat32Sigs( float32 a, float32 b, flag zSign )
+static float32 subFloat32Sigs( struct roundingData *roundData, float32 a, float32 b, flag zSign )
 {
     int16 aExp, bExp, zExp;
     bits32 aSig, bSig, zSig;
@@ -1123,7 +1114,7 @@ static float32 subFloat32Sigs( float32 a, float32 b, flag zSign )
     if ( expDiff < 0 ) goto bExpBigger;
     if ( aExp == 0xFF ) {
         if ( aSig | bSig ) return propagateFloat32NaN( a, b );
-        float_raise( float_flag_invalid );
+        roundData->exception |= float_flag_invalid;
         return float32_default_nan;
     }
     if ( aExp == 0 ) {
@@ -1132,7 +1123,7 @@ static float32 subFloat32Sigs( float32 a, float32 b, flag zSign )
     }
     if ( bSig < aSig ) goto aBigger;
     if ( aSig < bSig ) goto bBigger;
-    return packFloat32( float_rounding_mode == float_round_down, 0, 0 );
+    return packFloat32( roundData->mode == float_round_down, 0, 0 );
  bExpBigger:
     if ( bExp == 0xFF ) {
         if ( bSig ) return propagateFloat32NaN( a, b );
@@ -1169,7 +1160,7 @@ static float32 subFloat32Sigs( float32 a, float32 b, flag zSign )
     zExp = aExp;
  normalizeRoundAndPack:
     --zExp;
-    return normalizeRoundAndPackFloat32( zSign, zExp, zSig );
+    return normalizeRoundAndPackFloat32( roundData, zSign, zExp, zSig );
 
 }
 
@@ -1180,17 +1171,17 @@ and `b'.  The operation is performed according to the IEC/IEEE Standard for
 Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float32 float32_add( float32 a, float32 b )
+float32 float32_add( struct roundingData *roundData, float32 a, float32 b )
 {
     flag aSign, bSign;
 
     aSign = extractFloat32Sign( a );
     bSign = extractFloat32Sign( b );
     if ( aSign == bSign ) {
-        return addFloat32Sigs( a, b, aSign );
+        return addFloat32Sigs( roundData, a, b, aSign );
     }
     else {
-        return subFloat32Sigs( a, b, aSign );
+        return subFloat32Sigs( roundData, a, b, aSign );
     }
 
 }
@@ -1202,17 +1193,17 @@ Returns the result of subtracting the single-precision floating-point values
 for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float32 float32_sub( float32 a, float32 b )
+float32 float32_sub( struct roundingData *roundData, float32 a, float32 b )
 {
     flag aSign, bSign;
 
     aSign = extractFloat32Sign( a );
     bSign = extractFloat32Sign( b );
     if ( aSign == bSign ) {
-        return subFloat32Sigs( a, b, aSign );
+        return subFloat32Sigs( roundData, a, b, aSign );
     }
     else {
-        return addFloat32Sigs( a, b, aSign );
+        return addFloat32Sigs( roundData, a, b, aSign );
     }
 
 }
@@ -1224,7 +1215,7 @@ Returns the result of multiplying the single-precision floating-point values
 for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float32 float32_mul( float32 a, float32 b )
+float32 float32_mul( struct roundingData *roundData, float32 a, float32 b )
 {
     flag aSign, bSign, zSign;
     int16 aExp, bExp, zExp;
@@ -1244,7 +1235,7 @@ float32 float32_mul( float32 a, float32 b )
             return propagateFloat32NaN( a, b );
         }
         if ( ( bExp | bSig ) == 0 ) {
-            float_raise( float_flag_invalid );
+            roundData->exception |= float_flag_invalid;
             return float32_default_nan;
         }
         return packFloat32( zSign, 0xFF, 0 );
@@ -1252,7 +1243,7 @@ float32 float32_mul( float32 a, float32 b )
     if ( bExp == 0xFF ) {
         if ( bSig ) return propagateFloat32NaN( a, b );
         if ( ( aExp | aSig ) == 0 ) {
-            float_raise( float_flag_invalid );
+            roundData->exception |= float_flag_invalid;
             return float32_default_nan;
         }
         return packFloat32( zSign, 0xFF, 0 );
@@ -1274,7 +1265,7 @@ float32 float32_mul( float32 a, float32 b )
         zSig <<= 1;
         --zExp;
     }
-    return roundAndPackFloat32( zSign, zExp, zSig );
+    return roundAndPackFloat32( roundData, zSign, zExp, zSig );
 
 }
 
@@ -1285,7 +1276,7 @@ by the corresponding value `b'.  The operation is performed according to the
 IEC/IEEE Standard for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float32 float32_div( float32 a, float32 b )
+float32 float32_div( struct roundingData *roundData, float32 a, float32 b )
 {
     flag aSign, bSign, zSign;
     int16 aExp, bExp, zExp;
@@ -1302,7 +1293,7 @@ float32 float32_div( float32 a, float32 b )
         if ( aSig ) return propagateFloat32NaN( a, b );
         if ( bExp == 0xFF ) {
             if ( bSig ) return propagateFloat32NaN( a, b );
-            float_raise( float_flag_invalid );
+            roundData->exception |= float_flag_invalid;
             return float32_default_nan;
         }
         return packFloat32( zSign, 0xFF, 0 );
@@ -1314,10 +1305,10 @@ float32 float32_div( float32 a, float32 b )
     if ( bExp == 0 ) {
         if ( bSig == 0 ) {
             if ( ( aExp | aSig ) == 0 ) {
-                float_raise( float_flag_invalid );
+                roundData->exception |= float_flag_invalid;
                 return float32_default_nan;
             }
-            float_raise( float_flag_divbyzero );
+            roundData->exception |= float_flag_divbyzero;
             return packFloat32( zSign, 0xFF, 0 );
         }
         normalizeFloat32Subnormal( bSig, &bExp, &bSig );
@@ -1341,7 +1332,7 @@ float32 float32_div( float32 a, float32 b )
     if ( ( zSig & 0x3F ) == 0 ) {
         zSig |= ( ( (bits64) bSig ) * zSig != ( (bits64) aSig )<<32 );
     }
-    return roundAndPackFloat32( zSign, zExp, zSig );
+    return roundAndPackFloat32( roundData, zSign, zExp, zSig );
 
 }
 
@@ -1352,7 +1343,7 @@ with respect to the corresponding value `b'.  The operation is performed
 according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float32 float32_rem( float32 a, float32 b )
+float32 float32_rem( struct roundingData *roundData, float32 a, float32 b )
 {
     flag aSign, bSign, zSign;
     int16 aExp, bExp, expDiff;
@@ -1372,7 +1363,7 @@ float32 float32_rem( float32 a, float32 b )
         if ( aSig || ( ( bExp == 0xFF ) && bSig ) ) {
             return propagateFloat32NaN( a, b );
         }
-        float_raise( float_flag_invalid );
+        roundData->exception |= float_flag_invalid;
         return float32_default_nan;
     }
     if ( bExp == 0xFF ) {
@@ -1381,7 +1372,7 @@ float32 float32_rem( float32 a, float32 b )
     }
     if ( bExp == 0 ) {
         if ( bSig == 0 ) {
-            float_raise( float_flag_invalid );
+            roundData->exception |= float_flag_invalid;
             return float32_default_nan;
         }
         normalizeFloat32Subnormal( bSig, &bExp, &bSig );
@@ -1444,7 +1435,7 @@ float32 float32_rem( float32 a, float32 b )
     }
     zSign = ( (sbits32) aSig < 0 );
     if ( zSign ) aSig = - aSig;
-    return normalizeRoundAndPackFloat32( aSign ^ zSign, bExp, aSig );
+    return normalizeRoundAndPackFloat32( roundData, aSign ^ zSign, bExp, aSig );
 
 }
 
@@ -1455,7 +1446,7 @@ The operation is performed according to the IEC/IEEE Standard for Binary
 Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float32 float32_sqrt( float32 a )
+float32 float32_sqrt( struct roundingData *roundData, float32 a )
 {
     flag aSign;
     int16 aExp, zExp;
@@ -1468,12 +1459,12 @@ float32 float32_sqrt( float32 a )
     if ( aExp == 0xFF ) {
         if ( aSig ) return propagateFloat32NaN( a, 0 );
         if ( ! aSign ) return a;
-        float_raise( float_flag_invalid );
+        roundData->exception |= float_flag_invalid;
         return float32_default_nan;
     }
     if ( aSign ) {
         if ( ( aExp | aSig ) == 0 ) return a;
-        float_raise( float_flag_invalid );
+        roundData->exception |= float_flag_invalid;
         return float32_default_nan;
     }
     if ( aExp == 0 ) {
@@ -1499,7 +1490,7 @@ float32 float32_sqrt( float32 a )
         }
     }
     shift32RightJamming( zSig, 1, &zSig );
-    return roundAndPackFloat32( 0, zExp, zSig );
+    return roundAndPackFloat32( roundData, 0, zExp, zSig );
 
 }
 
@@ -1661,7 +1652,7 @@ positive integer is returned.  Otherwise, if the conversion overflows, the
 largest integer with the same sign as `a' is returned.
 -------------------------------------------------------------------------------
 */
-int32 float64_to_int32( float64 a )
+int32 float64_to_int32( struct roundingData *roundData, float64 a )
 {
     flag aSign;
     int16 aExp, shiftCount;
@@ -1674,7 +1665,7 @@ int32 float64_to_int32( float64 a )
     if ( aExp ) aSig |= LIT64( 0x0010000000000000 );
     shiftCount = 0x42C - aExp;
     if ( 0 < shiftCount ) shift64RightJamming( aSig, shiftCount, &aSig );
-    return roundAndPackInt32( aSign, aSig );
+    return roundAndPackInt32( roundData, aSign, aSig );
 
 }
 
@@ -1705,7 +1696,7 @@ int32 float64_to_int32_round_to_zero( float64 a )
         goto invalid;
     }
     else if ( 52 < shiftCount ) {
-        if ( aExp || aSig ) float_exception_flags |= float_flag_inexact;
+        if ( aExp || aSig ) float_raise( float_flag_inexact );
         return 0;
     }
     aSig |= LIT64( 0x0010000000000000 );
@@ -1715,11 +1706,11 @@ int32 float64_to_int32_round_to_zero( float64 a )
     if ( aSign ) z = - z;
     if ( ( z < 0 ) ^ aSign ) {
  invalid:
-        float_exception_flags |= float_flag_invalid;
+        float_raise( float_flag_invalid );
         return aSign ? 0x80000000 : 0x7FFFFFFF;
     }
     if ( ( aSig<<shiftCount ) != savedASig ) {
-        float_exception_flags |= float_flag_inexact;
+        float_raise( float_flag_inexact );
     }
     return z;
 
@@ -1736,7 +1727,7 @@ positive integer is returned.  Otherwise, if the conversion overflows, the
 largest positive integer is returned.
 -------------------------------------------------------------------------------
 */
-int32 float64_to_uint32( float64 a )
+int32 float64_to_uint32( struct roundingData *roundData, float64 a )
 {
     flag aSign;
     int16 aExp, shiftCount;
@@ -1749,7 +1740,7 @@ int32 float64_to_uint32( float64 a )
     if ( aExp ) aSig |= LIT64( 0x0010000000000000 );
     shiftCount = 0x42C - aExp;
     if ( 0 < shiftCount ) shift64RightJamming( aSig, shiftCount, &aSig );
-    return roundAndPackInt32( aSign, aSig );
+    return roundAndPackInt32( roundData, aSign, aSig );
 }
 
 /*
@@ -1778,7 +1769,7 @@ int32 float64_to_uint32_round_to_zero( float64 a )
         goto invalid;
     }
     else if ( 52 < shiftCount ) {
-        if ( aExp || aSig ) float_exception_flags |= float_flag_inexact;
+        if ( aExp || aSig ) float_raise( float_flag_inexact );
         return 0;
     }
     aSig |= LIT64( 0x0010000000000000 );
@@ -1788,11 +1779,11 @@ int32 float64_to_uint32_round_to_zero( float64 a )
     if ( aSign ) z = - z;
     if ( ( z < 0 ) ^ aSign ) {
  invalid:
-        float_exception_flags |= float_flag_invalid;
+        float_raise( float_flag_invalid );
         return aSign ? 0x80000000 : 0x7FFFFFFF;
     }
     if ( ( aSig<<shiftCount ) != savedASig ) {
-        float_exception_flags |= float_flag_inexact;
+        float_raise( float_flag_inexact );
     }
     return z;
 }
@@ -1805,7 +1796,7 @@ performed according to the IEC/IEEE Standard for Binary Floating-point
 Arithmetic.
 -------------------------------------------------------------------------------
 */
-float32 float64_to_float32( float64 a )
+float32 float64_to_float32( struct roundingData *roundData, float64 a )
 {
     flag aSign;
     int16 aExp;
@@ -1825,7 +1816,7 @@ float32 float64_to_float32( float64 a )
         zSig |= 0x40000000;
         aExp -= 0x381;
     }
-    return roundAndPackFloat32( aSign, aExp, zSig );
+    return roundAndPackFloat32( roundData, aSign, aExp, zSig );
 
 }
 
@@ -1872,7 +1863,7 @@ operation is performed according to the IEC/IEEE Standard for Binary
 Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float64 float64_round_to_int( float64 a )
+float64 float64_round_to_int( struct roundingData *roundData, float64 a )
 {
     flag aSign;
     int16 aExp;
@@ -1889,9 +1880,9 @@ float64 float64_round_to_int( float64 a )
     }
     if ( aExp <= 0x3FE ) {
         if ( (bits64) ( a<<1 ) == 0 ) return a;
-        float_exception_flags |= float_flag_inexact;
+        roundData->exception |= float_flag_inexact;
         aSign = extractFloat64Sign( a );
-        switch ( float_rounding_mode ) {
+        switch ( roundData->mode ) {
          case float_round_nearest_even:
             if ( ( aExp == 0x3FE ) && extractFloat64Frac( a ) ) {
                 return packFloat64( aSign, 0x3FF, 0 );
@@ -1909,7 +1900,7 @@ float64 float64_round_to_int( float64 a )
     lastBitMask <<= 0x433 - aExp;
     roundBitsMask = lastBitMask - 1;
     z = a;
-    roundingMode = float_rounding_mode;
+    roundingMode = roundData->mode;
     if ( roundingMode == float_round_nearest_even ) {
         z += lastBitMask>>1;
         if ( ( z & roundBitsMask ) == 0 ) z &= ~ lastBitMask;
@@ -1920,7 +1911,7 @@ float64 float64_round_to_int( float64 a )
         }
     }
     z &= ~ roundBitsMask;
-    if ( z != a ) float_exception_flags |= float_flag_inexact;
+    if ( z != a ) roundData->exception |= float_flag_inexact;
     return z;
 
 }
@@ -1934,7 +1925,7 @@ addition is performed according to the IEC/IEEE Standard for Binary
 Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-static float64 addFloat64Sigs( float64 a, float64 b, flag zSign )
+static float64 addFloat64Sigs( struct roundingData *roundData, float64 a, float64 b, flag zSign )
 {
     int16 aExp, bExp, zExp;
     bits64 aSig, bSig, zSig;
@@ -1993,7 +1984,7 @@ static float64 addFloat64Sigs( float64 a, float64 b, flag zSign )
         ++zExp;
     }
  roundAndPack:
-    return roundAndPackFloat64( zSign, zExp, zSig );
+    return roundAndPackFloat64( roundData, zSign, zExp, zSig );
 
 }
 
@@ -2006,7 +1997,7 @@ result is a NaN.  The subtraction is performed according to the IEC/IEEE
 Standard for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-static float64 subFloat64Sigs( float64 a, float64 b, flag zSign )
+static float64 subFloat64Sigs( struct roundingData *roundData, float64 a, float64 b, flag zSign )
 {
     int16 aExp, bExp, zExp;
     bits64 aSig, bSig, zSig;
@@ -2023,7 +2014,7 @@ static float64 subFloat64Sigs( float64 a, float64 b, flag zSign )
     if ( expDiff < 0 ) goto bExpBigger;
     if ( aExp == 0x7FF ) {
         if ( aSig | bSig ) return propagateFloat64NaN( a, b );
-        float_raise( float_flag_invalid );
+        roundData->exception |= float_flag_invalid;
         return float64_default_nan;
     }
     if ( aExp == 0 ) {
@@ -2032,7 +2023,7 @@ static float64 subFloat64Sigs( float64 a, float64 b, flag zSign )
     }
     if ( bSig < aSig ) goto aBigger;
     if ( aSig < bSig ) goto bBigger;
-    return packFloat64( float_rounding_mode == float_round_down, 0, 0 );
+    return packFloat64( roundData->mode == float_round_down, 0, 0 );
  bExpBigger:
     if ( bExp == 0x7FF ) {
         if ( bSig ) return propagateFloat64NaN( a, b );
@@ -2069,7 +2060,7 @@ static float64 subFloat64Sigs( float64 a, float64 b, flag zSign )
     zExp = aExp;
  normalizeRoundAndPack:
     --zExp;
-    return normalizeRoundAndPackFloat64( zSign, zExp, zSig );
+    return normalizeRoundAndPackFloat64( roundData, zSign, zExp, zSig );
 
 }
 
@@ -2080,17 +2071,17 @@ and `b'.  The operation is performed according to the IEC/IEEE Standard for
 Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float64 float64_add( float64 a, float64 b )
+float64 float64_add( struct roundingData *roundData, float64 a, float64 b )
 {
     flag aSign, bSign;
 
     aSign = extractFloat64Sign( a );
     bSign = extractFloat64Sign( b );
     if ( aSign == bSign ) {
-        return addFloat64Sigs( a, b, aSign );
+        return addFloat64Sigs( roundData, a, b, aSign );
     }
     else {
-        return subFloat64Sigs( a, b, aSign );
+        return subFloat64Sigs( roundData, a, b, aSign );
     }
 
 }
@@ -2102,17 +2093,17 @@ Returns the result of subtracting the double-precision floating-point values
 for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float64 float64_sub( float64 a, float64 b )
+float64 float64_sub( struct roundingData *roundData, float64 a, float64 b )
 {
     flag aSign, bSign;
 
     aSign = extractFloat64Sign( a );
     bSign = extractFloat64Sign( b );
     if ( aSign == bSign ) {
-        return subFloat64Sigs( a, b, aSign );
+        return subFloat64Sigs( roundData, a, b, aSign );
     }
     else {
-        return addFloat64Sigs( a, b, aSign );
+        return addFloat64Sigs( roundData, a, b, aSign );
     }
 
 }
@@ -2124,7 +2115,7 @@ Returns the result of multiplying the double-precision floating-point values
 for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float64 float64_mul( float64 a, float64 b )
+float64 float64_mul( struct roundingData *roundData, float64 a, float64 b )
 {
     flag aSign, bSign, zSign;
     int16 aExp, bExp, zExp;
@@ -2142,7 +2133,7 @@ float64 float64_mul( float64 a, float64 b )
             return propagateFloat64NaN( a, b );
         }
         if ( ( bExp | bSig ) == 0 ) {
-            float_raise( float_flag_invalid );
+            roundData->exception |= float_flag_invalid;
             return float64_default_nan;
         }
         return packFloat64( zSign, 0x7FF, 0 );
@@ -2150,7 +2141,7 @@ float64 float64_mul( float64 a, float64 b )
     if ( bExp == 0x7FF ) {
         if ( bSig ) return propagateFloat64NaN( a, b );
         if ( ( aExp | aSig ) == 0 ) {
-            float_raise( float_flag_invalid );
+            roundData->exception |= float_flag_invalid;
             return float64_default_nan;
         }
         return packFloat64( zSign, 0x7FF, 0 );
@@ -2172,7 +2163,7 @@ float64 float64_mul( float64 a, float64 b )
         zSig0 <<= 1;
         --zExp;
     }
-    return roundAndPackFloat64( zSign, zExp, zSig0 );
+    return roundAndPackFloat64( roundData, zSign, zExp, zSig0 );
 
 }
 
@@ -2183,7 +2174,7 @@ by the corresponding value `b'.  The operation is performed according to
 the IEC/IEEE Standard for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float64 float64_div( float64 a, float64 b )
+float64 float64_div( struct roundingData *roundData, float64 a, float64 b )
 {
     flag aSign, bSign, zSign;
     int16 aExp, bExp, zExp;
@@ -2202,7 +2193,7 @@ float64 float64_div( float64 a, float64 b )
         if ( aSig ) return propagateFloat64NaN( a, b );
         if ( bExp == 0x7FF ) {
             if ( bSig ) return propagateFloat64NaN( a, b );
-            float_raise( float_flag_invalid );
+            roundData->exception |= float_flag_invalid;
             return float64_default_nan;
         }
         return packFloat64( zSign, 0x7FF, 0 );
@@ -2214,10 +2205,10 @@ float64 float64_div( float64 a, float64 b )
     if ( bExp == 0 ) {
         if ( bSig == 0 ) {
             if ( ( aExp | aSig ) == 0 ) {
-                float_raise( float_flag_invalid );
+                roundData->exception |= float_flag_invalid;
                 return float64_default_nan;
             }
-            float_raise( float_flag_divbyzero );
+            roundData->exception |= float_flag_divbyzero;
             return packFloat64( zSign, 0x7FF, 0 );
         }
         normalizeFloat64Subnormal( bSig, &bExp, &bSig );
@@ -2243,7 +2234,7 @@ float64 float64_div( float64 a, float64 b )
         }
         zSig |= ( rem1 != 0 );
     }
-    return roundAndPackFloat64( zSign, zExp, zSig );
+    return roundAndPackFloat64( roundData, zSign, zExp, zSig );
 
 }
 
@@ -2254,7 +2245,7 @@ with respect to the corresponding value `b'.  The operation is performed
 according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float64 float64_rem( float64 a, float64 b )
+float64 float64_rem( struct roundingData *roundData, float64 a, float64 b )
 {
     flag aSign, bSign, zSign;
     int16 aExp, bExp, expDiff;
@@ -2272,7 +2263,7 @@ float64 float64_rem( float64 a, float64 b )
         if ( aSig || ( ( bExp == 0x7FF ) && bSig ) ) {
             return propagateFloat64NaN( a, b );
         }
-        float_raise( float_flag_invalid );
+        roundData->exception |= float_flag_invalid;
         return float64_default_nan;
     }
     if ( bExp == 0x7FF ) {
@@ -2281,7 +2272,7 @@ float64 float64_rem( float64 a, float64 b )
     }
     if ( bExp == 0 ) {
         if ( bSig == 0 ) {
-            float_raise( float_flag_invalid );
+            roundData->exception |= float_flag_invalid;
             return float64_default_nan;
         }
         normalizeFloat64Subnormal( bSig, &bExp, &bSig );
@@ -2329,7 +2320,7 @@ float64 float64_rem( float64 a, float64 b )
     }
     zSign = ( (sbits64) aSig < 0 );
     if ( zSign ) aSig = - aSig;
-    return normalizeRoundAndPackFloat64( aSign ^ zSign, bExp, aSig );
+    return normalizeRoundAndPackFloat64( roundData, aSign ^ zSign, bExp, aSig );
 
 }
 
@@ -2340,7 +2331,7 @@ The operation is performed according to the IEC/IEEE Standard for Binary
 Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float64 float64_sqrt( float64 a )
+float64 float64_sqrt( struct roundingData *roundData, float64 a )
 {
     flag aSign;
     int16 aExp, zExp;
@@ -2354,12 +2345,12 @@ float64 float64_sqrt( float64 a )
     if ( aExp == 0x7FF ) {
         if ( aSig ) return propagateFloat64NaN( a, a );
         if ( ! aSign ) return a;
-        float_raise( float_flag_invalid );
+        roundData->exception |= float_flag_invalid;
         return float64_default_nan;
     }
     if ( aSign ) {
         if ( ( aExp | aSig ) == 0 ) return a;
-        float_raise( float_flag_invalid );
+        roundData->exception |= float_flag_invalid;
         return float64_default_nan;
     }
     if ( aExp == 0 ) {
@@ -2390,7 +2381,7 @@ float64 float64_sqrt( float64 a )
         }
     }
     shift64RightJamming( zSig, 1, &zSig );
-    return roundAndPackFloat64( 0, zExp, zSig );
+    return roundAndPackFloat64( roundData, 0, zExp, zSig );
 
 }
 
@@ -2554,7 +2545,7 @@ largest positive integer is returned.  Otherwise, if the conversion
 overflows, the largest integer with the same sign as `a' is returned.
 -------------------------------------------------------------------------------
 */
-int32 floatx80_to_int32( floatx80 a )
+int32 floatx80_to_int32( struct roundingData *roundData, floatx80 a )
 {
     flag aSign;
     int32 aExp, shiftCount;
@@ -2567,7 +2558,7 @@ int32 floatx80_to_int32( floatx80 a )
     shiftCount = 0x4037 - aExp;
     if ( shiftCount <= 0 ) shiftCount = 1;
     shift64RightJamming( aSig, shiftCount, &aSig );
-    return roundAndPackInt32( aSign, aSig );
+    return roundAndPackInt32( roundData, aSign, aSig );
 
 }
 
@@ -2598,7 +2589,7 @@ int32 floatx80_to_int32_round_to_zero( floatx80 a )
         goto invalid;
     }
     else if ( 63 < shiftCount ) {
-        if ( aExp || aSig ) float_exception_flags |= float_flag_inexact;
+        if ( aExp || aSig ) float_raise( float_flag_inexact );
         return 0;
     }
     savedASig = aSig;
@@ -2607,11 +2598,11 @@ int32 floatx80_to_int32_round_to_zero( floatx80 a )
     if ( aSign ) z = - z;
     if ( ( z < 0 ) ^ aSign ) {
  invalid:
-        float_exception_flags |= float_flag_invalid;
+        float_raise( float_flag_invalid );
         return aSign ? 0x80000000 : 0x7FFFFFFF;
     }
     if ( ( aSig<<shiftCount ) != savedASig ) {
-        float_exception_flags |= float_flag_inexact;
+        float_raise( float_flag_inexact );
     }
     return z;
 
@@ -2625,7 +2616,7 @@ conversion is performed according to the IEC/IEEE Standard for Binary
 Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float32 floatx80_to_float32( floatx80 a )
+float32 floatx80_to_float32( struct roundingData *roundData, floatx80 a )
 {
     flag aSign;
     int32 aExp;
@@ -2642,7 +2633,7 @@ float32 floatx80_to_float32( floatx80 a )
     }
     shift64RightJamming( aSig, 33, &aSig );
     if ( aExp || aSig ) aExp -= 0x3F81;
-    return roundAndPackFloat32( aSign, aExp, aSig );
+    return roundAndPackFloat32( roundData, aSign, aExp, aSig );
 
 }
 
@@ -2654,7 +2645,7 @@ conversion is performed according to the IEC/IEEE Standard for Binary
 Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-float64 floatx80_to_float64( floatx80 a )
+float64 floatx80_to_float64( struct roundingData *roundData, floatx80 a )
 {
     flag aSign;
     int32 aExp;
@@ -2671,7 +2662,7 @@ float64 floatx80_to_float64( floatx80 a )
     }
     shift64RightJamming( aSig, 1, &zSig );
     if ( aExp || aSig ) aExp -= 0x3C01;
-    return roundAndPackFloat64( aSign, aExp, zSig );
+    return roundAndPackFloat64( roundData, aSign, aExp, zSig );
 
 }
 
@@ -2683,7 +2674,7 @@ value.  The operation is performed according to the IEC/IEEE Standard for
 Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-floatx80 floatx80_round_to_int( floatx80 a )
+floatx80 floatx80_round_to_int( struct roundingData *roundData, floatx80 a )
 {
     flag aSign;
     int32 aExp;
@@ -2703,9 +2694,9 @@ floatx80 floatx80_round_to_int( floatx80 a )
              && ( (bits64) ( extractFloatx80Frac( a )<<1 ) == 0 ) ) {
             return a;
         }
-        float_exception_flags |= float_flag_inexact;
+        roundData->exception |= float_flag_inexact;
         aSign = extractFloatx80Sign( a );
-        switch ( float_rounding_mode ) {
+        switch ( roundData->mode ) {
          case float_round_nearest_even:
             if ( ( aExp == 0x3FFE ) && (bits64) ( extractFloatx80Frac( a )<<1 )
                ) {
@@ -2729,7 +2720,7 @@ floatx80 floatx80_round_to_int( floatx80 a )
     lastBitMask <<= 0x403E - aExp;
     roundBitsMask = lastBitMask - 1;
     z = a;
-    roundingMode = float_rounding_mode;
+    roundingMode = roundData->mode;
     if ( roundingMode == float_round_nearest_even ) {
         z.low += lastBitMask>>1;
         if ( ( z.low & roundBitsMask ) == 0 ) z.low &= ~ lastBitMask;
@@ -2744,7 +2735,7 @@ floatx80 floatx80_round_to_int( floatx80 a )
         ++z.high;
         z.low = LIT64( 0x8000000000000000 );
     }
-    if ( z.low != a.low ) float_exception_flags |= float_flag_inexact;
+    if ( z.low != a.low ) roundData->exception |= float_flag_inexact;
     return z;
 
 }
@@ -2758,7 +2749,7 @@ The addition is performed according to the IEC/IEEE Standard for Binary
 Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-static floatx80 addFloatx80Sigs( floatx80 a, floatx80 b, flag zSign )
+static floatx80 addFloatx80Sigs( struct roundingData *roundData, floatx80 a, floatx80 b, flag zSign )
 {
     int32 aExp, bExp, zExp;
     bits64 aSig, bSig, zSig0, zSig1;
@@ -2814,7 +2805,7 @@ static floatx80 addFloatx80Sigs( floatx80 a, floatx80 b, flag zSign )
  roundAndPack:
     return
         roundAndPackFloatx80(
-            floatx80_rounding_precision, zSign, zExp, zSig0, zSig1 );
+            roundData, zSign, zExp, zSig0, zSig1 );
 
 }
 
@@ -2827,7 +2818,7 @@ result is a NaN.  The subtraction is performed according to the IEC/IEEE
 Standard for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-static floatx80 subFloatx80Sigs( floatx80 a, floatx80 b, flag zSign )
+static floatx80 subFloatx80Sigs( struct roundingData *roundData, floatx80 a, floatx80 b, flag zSign )
 {
     int32 aExp, bExp, zExp;
     bits64 aSig, bSig, zSig0, zSig1;
@@ -2845,7 +2836,7 @@ static floatx80 subFloatx80Sigs( floatx80 a, floatx80 b, flag zSign )
         if ( (bits64) ( ( aSig | bSig )<<1 ) ) {
             return propagateFloatx80NaN( a, b );
         }
-        float_raise( float_flag_invalid );
+        roundData->exception |= float_flag_invalid;
         z.low = floatx80_default_nan_low;
         z.high = floatx80_default_nan_high;
         return z;
@@ -2857,7 +2848,7 @@ static floatx80 subFloatx80Sigs( floatx80 a, floatx80 b, flag zSign )
     zSig1 = 0;
     if ( bSig < aSig ) goto aBigger;
     if ( aSig < bSig ) goto bBigger;
-    return packFloatx80( float_rounding_mode == float_round_down, 0, 0 );
+    return packFloatx80( roundData->mode == float_round_down, 0, 0 );
  bExpBigger:
     if ( bExp == 0x7FFF ) {
         if ( (bits64) ( bSig<<1 ) ) return propagateFloatx80NaN( a, b );
@@ -2883,7 +2874,7 @@ static floatx80 subFloatx80Sigs( floatx80 a, floatx80 b, flag zSign )
  normalizeRoundAndPack:
     return
         normalizeRoundAndPackFloatx80(
-            floatx80_rounding_precision, zSign, zExp, zSig0, zSig1 );
+            roundData, zSign, zExp, zSig0, zSig1 );
 
 }
 
@@ -2894,17 +2885,17 @@ values `a' and `b'.  The operation is performed according to the IEC/IEEE
 Standard for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-floatx80 floatx80_add( floatx80 a, floatx80 b )
+floatx80 floatx80_add( struct roundingData *roundData, floatx80 a, floatx80 b )
 {
     flag aSign, bSign;
     
     aSign = extractFloatx80Sign( a );
     bSign = extractFloatx80Sign( b );
     if ( aSign == bSign ) {
-        return addFloatx80Sigs( a, b, aSign );
+        return addFloatx80Sigs( roundData, a, b, aSign );
     }
     else {
-        return subFloatx80Sigs( a, b, aSign );
+        return subFloatx80Sigs( roundData, a, b, aSign );
     }
     
 }
@@ -2916,17 +2907,17 @@ point values `a' and `b'.  The operation is performed according to the
 IEC/IEEE Standard for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-floatx80 floatx80_sub( floatx80 a, floatx80 b )
+floatx80 floatx80_sub( struct roundingData *roundData, floatx80 a, floatx80 b )
 {
     flag aSign, bSign;
 
     aSign = extractFloatx80Sign( a );
     bSign = extractFloatx80Sign( b );
     if ( aSign == bSign ) {
-        return subFloatx80Sigs( a, b, aSign );
+        return subFloatx80Sigs( roundData, a, b, aSign );
     }
     else {
-        return addFloatx80Sigs( a, b, aSign );
+        return addFloatx80Sigs( roundData, a, b, aSign );
     }
 
 }
@@ -2938,7 +2929,7 @@ point values `a' and `b'.  The operation is performed according to the
 IEC/IEEE Standard for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-floatx80 floatx80_mul( floatx80 a, floatx80 b )
+floatx80 floatx80_mul( struct roundingData *roundData, floatx80 a, floatx80 b )
 {
     flag aSign, bSign, zSign;
     int32 aExp, bExp, zExp;
@@ -2964,7 +2955,7 @@ floatx80 floatx80_mul( floatx80 a, floatx80 b )
         if ( (bits64) ( bSig<<1 ) ) return propagateFloatx80NaN( a, b );
         if ( ( aExp | aSig ) == 0 ) {
  invalid:
-            float_raise( float_flag_invalid );
+            roundData->exception |= float_flag_invalid;
             z.low = floatx80_default_nan_low;
             z.high = floatx80_default_nan_high;
             return z;
@@ -2987,7 +2978,7 @@ floatx80 floatx80_mul( floatx80 a, floatx80 b )
     }
     return
         roundAndPackFloatx80(
-            floatx80_rounding_precision, zSign, zExp, zSig0, zSig1 );
+            roundData, zSign, zExp, zSig0, zSig1 );
 
 }
 
@@ -2998,7 +2989,7 @@ value `a' by the corresponding value `b'.  The operation is performed
 according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-floatx80 floatx80_div( floatx80 a, floatx80 b )
+floatx80 floatx80_div( struct roundingData *roundData, floatx80 a, floatx80 b )
 {
     flag aSign, bSign, zSign;
     int32 aExp, bExp, zExp;
@@ -3029,12 +3020,12 @@ floatx80 floatx80_div( floatx80 a, floatx80 b )
         if ( bSig == 0 ) {
             if ( ( aExp | aSig ) == 0 ) {
  invalid:
-                float_raise( float_flag_invalid );
+                roundData->exception |= float_flag_invalid;
                 z.low = floatx80_default_nan_low;
                 z.high = floatx80_default_nan_high;
                 return z;
             }
-            float_raise( float_flag_divbyzero );
+            roundData->exception |= float_flag_divbyzero;
             return packFloatx80( zSign, 0x7FFF, LIT64( 0x8000000000000000 ) );
         }
         normalizeFloatx80Subnormal( bSig, &bExp, &bSig );
@@ -3068,7 +3059,7 @@ floatx80 floatx80_div( floatx80 a, floatx80 b )
     }
     return
         roundAndPackFloatx80(
-            floatx80_rounding_precision, zSign, zExp, zSig0, zSig1 );
+            roundData, zSign, zExp, zSig0, zSig1 );
 
 }
 
@@ -3079,7 +3070,7 @@ Returns the remainder of the extended double-precision floating-point value
 according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-floatx80 floatx80_rem( floatx80 a, floatx80 b )
+floatx80 floatx80_rem( struct roundingData *roundData, floatx80 a, floatx80 b )
 {
     flag aSign, bSign, zSign;
     int32 aExp, bExp, expDiff;
@@ -3107,7 +3098,7 @@ floatx80 floatx80_rem( floatx80 a, floatx80 b )
     if ( bExp == 0 ) {
         if ( bSig == 0 ) {
  invalid:
-            float_raise( float_flag_invalid );
+            roundData->exception |= float_flag_invalid;
             z.low = floatx80_default_nan_low;
             z.high = floatx80_default_nan_high;
             return z;
@@ -3164,9 +3155,10 @@ floatx80 floatx80_rem( floatx80 a, floatx80 b )
         aSig1 = alternateASig1;
         zSign = ! zSign;
     }
+
     return
         normalizeRoundAndPackFloatx80(
-            80, zSign, bExp + expDiff, aSig0, aSig1 );
+            roundData, zSign, bExp + expDiff, aSig0, aSig1 );
 
 }
 
@@ -3177,7 +3169,7 @@ value `a'.  The operation is performed according to the IEC/IEEE Standard
 for Binary Floating-point Arithmetic.
 -------------------------------------------------------------------------------
 */
-floatx80 floatx80_sqrt( floatx80 a )
+floatx80 floatx80_sqrt( struct roundingData *roundData, floatx80 a )
 {
     flag aSign;
     int32 aExp, zExp;
@@ -3197,7 +3189,7 @@ floatx80 floatx80_sqrt( floatx80 a )
     if ( aSign ) {
         if ( ( aExp | aSig0 ) == 0 ) return a;
  invalid:
-        float_raise( float_flag_invalid );
+        roundData->exception |= float_flag_invalid;
         z.low = floatx80_default_nan_low;
         z.high = floatx80_default_nan_high;
         return z;
@@ -3242,7 +3234,7 @@ floatx80 floatx80_sqrt( floatx80 a )
     }
     return
         roundAndPackFloatx80(
-            floatx80_rounding_precision, 0, zExp, zSig0, zSig1 );
+            roundData, 0, zExp, zSig0, zSig1 );
 
 }
 
@@ -3264,7 +3256,7 @@ flag floatx80_eq( floatx80 a, floatx80 b )
        ) {
         if (    floatx80_is_signaling_nan( a )
              || floatx80_is_signaling_nan( b ) ) {
-            float_raise( float_flag_invalid );
+            roundData->exception |= float_flag_invalid;
         }
         return 0;
     }
@@ -3294,7 +3286,7 @@ flag floatx80_le( floatx80 a, floatx80 b )
          || (    ( extractFloatx80Exp( b ) == 0x7FFF )
               && (bits64) ( extractFloatx80Frac( b )<<1 ) )
        ) {
-        float_raise( float_flag_invalid );
+        roundData->exception |= float_flag_invalid;
         return 0;
     }
     aSign = extractFloatx80Sign( a );
@@ -3328,7 +3320,7 @@ flag floatx80_lt( floatx80 a, floatx80 b )
          || (    ( extractFloatx80Exp( b ) == 0x7FFF )
               && (bits64) ( extractFloatx80Frac( b )<<1 ) )
        ) {
-        float_raise( float_flag_invalid );
+        roundData->exception |= float_flag_invalid;
         return 0;
     }
     aSign = extractFloatx80Sign( a );
@@ -3361,7 +3353,7 @@ flag floatx80_eq_signaling( floatx80 a, floatx80 b )
          || (    ( extractFloatx80Exp( b ) == 0x7FFF )
               && (bits64) ( extractFloatx80Frac( b )<<1 ) )
        ) {
-        float_raise( float_flag_invalid );
+        roundData->exception |= float_flag_invalid;
         return 0;
     }
     return
@@ -3392,7 +3384,7 @@ flag floatx80_le_quiet( floatx80 a, floatx80 b )
        ) {
         if (    floatx80_is_signaling_nan( a )
              || floatx80_is_signaling_nan( b ) ) {
-            float_raise( float_flag_invalid );
+            roundData->exception |= float_flag_invalid;
         }
         return 0;
     }
@@ -3429,7 +3421,7 @@ flag floatx80_lt_quiet( floatx80 a, floatx80 b )
        ) {
         if (    floatx80_is_signaling_nan( a )
              || floatx80_is_signaling_nan( b ) ) {
-            float_raise( float_flag_invalid );
+            roundData->exception |= float_flag_invalid;
         }
         return 0;
     }
diff --git a/arch/arm/nwfpe/softfloat.h b/arch/arm/nwfpe/softfloat.h
index 1e1743173899..1c8799b9ee4d 100644
--- a/arch/arm/nwfpe/softfloat.h
+++ b/arch/arm/nwfpe/softfloat.h
@@ -74,7 +74,7 @@ enum {
 Software IEC/IEEE floating-point rounding mode.
 -------------------------------------------------------------------------------
 */
-extern signed char float_rounding_mode;
+//extern int8 float_rounding_mode;
 enum {
     float_round_nearest_even = 0,
     float_round_to_zero      = 1,
@@ -86,7 +86,6 @@ enum {
 -------------------------------------------------------------------------------
 Software IEC/IEEE floating-point exception flags.
 -------------------------------------------------------------------------------
-extern signed char float_exception_flags;
 enum {
     float_flag_inexact   =  1,
     float_flag_underflow =  2,
@@ -99,7 +98,6 @@ ScottB: November 4, 1998
 Changed the enumeration to match the bit order in the FPA11.
 */
 
-extern signed char float_exception_flags;
 enum {
     float_flag_invalid   =  1,
     float_flag_divbyzero =  2,
@@ -121,7 +119,7 @@ void float_raise( signed char );
 Software IEC/IEEE integer-to-floating-point conversion routines.
 -------------------------------------------------------------------------------
 */
-float32 int32_to_float32( signed int );
+float32 int32_to_float32( struct roundingData *, signed int );
 float64 int32_to_float64( signed int );
 #ifdef FLOATX80
 floatx80 int32_to_floatx80( signed int );
@@ -132,7 +130,7 @@ floatx80 int32_to_floatx80( signed int );
 Software IEC/IEEE single-precision conversion routines.
 -------------------------------------------------------------------------------
 */
-signed int float32_to_int32( float32 );
+signed int float32_to_int32( struct roundingData *, float32 );
 signed int float32_to_int32_round_to_zero( float32 );
 float64 float32_to_float64( float32 );
 #ifdef FLOATX80
@@ -144,13 +142,13 @@ floatx80 float32_to_floatx80( float32 );
 Software IEC/IEEE single-precision operations.
 -------------------------------------------------------------------------------
 */
-float32 float32_round_to_int( float32 );
-float32 float32_add( float32, float32 );
-float32 float32_sub( float32, float32 );
-float32 float32_mul( float32, float32 );
-float32 float32_div( float32, float32 );
-float32 float32_rem( float32, float32 );
-float32 float32_sqrt( float32 );
+float32 float32_round_to_int( struct roundingData*, float32 );
+float32 float32_add( struct roundingData *, float32, float32 );
+float32 float32_sub( struct roundingData *, float32, float32 );
+float32 float32_mul( struct roundingData *, float32, float32 );
+float32 float32_div( struct roundingData *, float32, float32 );
+float32 float32_rem( struct roundingData *, float32, float32 );
+float32 float32_sqrt( struct roundingData*, float32 );
 char float32_eq( float32, float32 );
 char float32_le( float32, float32 );
 char float32_lt( float32, float32 );
@@ -164,9 +162,9 @@ char float32_is_signaling_nan( float32 );
 Software IEC/IEEE double-precision conversion routines.
 -------------------------------------------------------------------------------
 */
-signed int float64_to_int32( float64 );
+signed int float64_to_int32( struct roundingData *, float64 );
 signed int float64_to_int32_round_to_zero( float64 );
-float32 float64_to_float32( float64 );
+float32 float64_to_float32( struct roundingData *, float64 );
 #ifdef FLOATX80
 floatx80 float64_to_floatx80( float64 );
 #endif
@@ -176,13 +174,13 @@ floatx80 float64_to_floatx80( float64 );
 Software IEC/IEEE double-precision operations.
 -------------------------------------------------------------------------------
 */
-float64 float64_round_to_int( float64 );
-float64 float64_add( float64, float64 );
-float64 float64_sub( float64, float64 );
-float64 float64_mul( float64, float64 );
-float64 float64_div( float64, float64 );
-float64 float64_rem( float64, float64 );
-float64 float64_sqrt( float64 );
+float64 float64_round_to_int( struct roundingData *, float64 );
+float64 float64_add( struct roundingData *, float64, float64 );
+float64 float64_sub( struct roundingData *, float64, float64 );
+float64 float64_mul( struct roundingData *, float64, float64 );
+float64 float64_div( struct roundingData *, float64, float64 );
+float64 float64_rem( struct roundingData *, float64, float64 );
+float64 float64_sqrt( struct roundingData *, float64 );
 char float64_eq( float64, float64 );
 char float64_le( float64, float64 );
 char float64_lt( float64, float64 );
@@ -198,31 +196,23 @@ char float64_is_signaling_nan( float64 );
 Software IEC/IEEE extended double-precision conversion routines.
 -------------------------------------------------------------------------------
 */
-signed int floatx80_to_int32( floatx80 );
+signed int floatx80_to_int32( struct roundingData *, floatx80 );
 signed int floatx80_to_int32_round_to_zero( floatx80 );
-float32 floatx80_to_float32( floatx80 );
-float64 floatx80_to_float64( floatx80 );
-
-/*
--------------------------------------------------------------------------------
-Software IEC/IEEE extended double-precision rounding precision.  Valid
-values are 32, 64, and 80.
--------------------------------------------------------------------------------
-*/
-extern signed char floatx80_rounding_precision;
+float32 floatx80_to_float32( struct roundingData *, floatx80 );
+float64 floatx80_to_float64( struct roundingData *, floatx80 );
 
 /*
 -------------------------------------------------------------------------------
 Software IEC/IEEE extended double-precision operations.
 -------------------------------------------------------------------------------
 */
-floatx80 floatx80_round_to_int( floatx80 );
-floatx80 floatx80_add( floatx80, floatx80 );
-floatx80 floatx80_sub( floatx80, floatx80 );
-floatx80 floatx80_mul( floatx80, floatx80 );
-floatx80 floatx80_div( floatx80, floatx80 );
-floatx80 floatx80_rem( floatx80, floatx80 );
-floatx80 floatx80_sqrt( floatx80 );
+floatx80 floatx80_round_to_int( struct roundingData *, floatx80 );
+floatx80 floatx80_add( struct roundingData *, floatx80, floatx80 );
+floatx80 floatx80_sub( struct roundingData *, floatx80, floatx80 );
+floatx80 floatx80_mul( struct roundingData *, floatx80, floatx80 );
+floatx80 floatx80_div( struct roundingData *, floatx80, floatx80 );
+floatx80 floatx80_rem( struct roundingData *, floatx80, floatx80 );
+floatx80 floatx80_sqrt( struct roundingData *, floatx80 );
 char floatx80_eq( floatx80, floatx80 );
 char floatx80_le( floatx80, floatx80 );
 char floatx80_lt( floatx80, floatx80 );
diff --git a/arch/arm/oprofile/backtrace.c b/arch/arm/oprofile/backtrace.c
index ec58d3e2eb8b..df35c452a8bf 100644
--- a/arch/arm/oprofile/backtrace.c
+++ b/arch/arm/oprofile/backtrace.c
@@ -115,7 +115,7 @@ static int valid_kernel_stack(struct frame_tail *tail, struct pt_regs *regs)
 	return (tailaddr > stack) && (tailaddr < stack_base);
 }
 
-void arm_backtrace(struct pt_regs const *regs, unsigned int depth)
+void arm_backtrace(struct pt_regs * const regs, unsigned int depth)
 {
 	struct frame_tail *tail;
 	unsigned long last_address = 0;
diff --git a/arch/arm/vfp/vfpdouble.c b/arch/arm/vfp/vfpdouble.c
index b801cd66b6ea..9b367a65cb4d 100644
--- a/arch/arm/vfp/vfpdouble.c
+++ b/arch/arm/vfp/vfpdouble.c
@@ -770,6 +770,9 @@ vfp_double_add(struct vfp_double *vdd, struct vfp_double *vdn,
 		if ((s64)m_sig < 0) {
 			vdd->sign = vfp_sign_negate(vdd->sign);
 			m_sig = -m_sig;
+		} else if (m_sig == 0) {
+			vdd->sign = (fpscr & FPSCR_RMODE_MASK) ==
+				      FPSCR_ROUND_MINUSINF ? 0x8000 : 0;
 		}
 	} else {
 		m_sig += vdn->significand;