diff options
| author | David Brownell <dbrownell@users.sourceforge.net> | 2008-09-06 20:19:02 -0700 |
|---|---|---|
| committer | Haavard Skinnemoen <haavard.skinnemoen@atmel.com> | 2008-09-22 09:51:01 +0200 |
| commit | 96706600de83966812b01a3cb310a13da2a1a4e9 (patch) | |
| tree | 808954056fbfa9e5f98aa103068abbb9a1109416 /arch/avr32 | |
| parent | 7066412488281fd1c201dceb22a0dfe467012f76 (diff) | |
| download | linux-96706600de83966812b01a3cb310a13da2a1a4e9.tar.gz linux-96706600de83966812b01a3cb310a13da2a1a4e9.tar.bz2 linux-96706600de83966812b01a3cb310a13da2a1a4e9.zip | |
ngw100: export J15 through sysfs
The NGW100 board has jumper J15 (near the reset button) which
is unused. This patch exports it through the GPIO sysfs support
(as /sys/class/gpio/gpio62/value) so that it's easily queried
by boot scripts or whatever might want to know if the jumper
has been installed (value = 0) or not (value = 1, "default").
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
[haavard.skinnemoen@atmel.com: add missing include]
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Diffstat (limited to 'arch/avr32')
| -rw-r--r-- | arch/avr32/boards/atngw100/setup.c | 10 |
1 files changed, 10 insertions, 0 deletions
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c index b8286f1ce854..abcb0d9559b1 100644 --- a/arch/avr32/boards/atngw100/setup.c +++ b/arch/avr32/boards/atngw100/setup.c @@ -9,6 +9,7 @@ */ #include <linux/clk.h> #include <linux/etherdevice.h> +#include <linux/gpio.h> #include <linux/irq.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> @@ -204,6 +205,15 @@ postcore_initcall(atngw100_init); static int __init atngw100_arch_init(void) { + /* PB30 is the otherwise unused jumper on the mainboard, with an + * external pullup; the jumper grounds it. Use it however you + * like, including letting U-Boot or Linux tweak boot sequences. + */ + at32_select_gpio(GPIO_PIN_PB(30), 0); + gpio_request(GPIO_PIN_PB(30), "j15"); + gpio_direction_input(GPIO_PIN_PB(30)); + gpio_export(GPIO_PIN_PB(30), false); + /* set_irq_type() after the arch_initcall for EIC has run, and * before the I2C subsystem could try using this IRQ. */ |