Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	sound/core/memalloc.c

1 files changed, 160 insertions, 0 deletions

diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
new file mode 100644
index 000000000000..1ac6b06f42a3
--- /dev/null
+++ b/arch/mips/alchemy/common/setup.c
@@ -0,0 +1,160 @@
+/*
+ * Copyright 2000, 2007-2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com
+ *
+ * Updates to 2.6, Pete Popov, Embedded Alley Solutions, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+
+#include <asm/mipsregs.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+
+#include <au1000.h>
+#include <prom.h>
+
+extern void __init board_setup(void);
+extern void au1000_restart(char *);
+extern void au1000_halt(void);
+extern void au1000_power_off(void);
+extern void set_cpuspec(void);
+
+void __init plat_mem_setup(void)
+{
+	struct	cpu_spec *sp;
+	char *argptr;
+	unsigned long prid, cpufreq, bclk;
+
+	set_cpuspec();
+	sp = cur_cpu_spec[0];
+
+	board_setup();  /* board specific setup */
+
+	prid = read_c0_prid();
+	if (sp->cpu_pll_wo)
+#ifdef CONFIG_SOC_AU1000_FREQUENCY
+		cpufreq = CONFIG_SOC_AU1000_FREQUENCY / 1000000;
+#else
+		cpufreq = 396;
+#endif
+	else
+		cpufreq = (au_readl(SYS_CPUPLL) & 0x3F) * 12;
+	printk(KERN_INFO "(PRID %08lx) @ %ld MHz\n", prid, cpufreq);
+
+	if (sp->cpu_bclk) {
+		/* Enable BCLK switching */
+		bclk = au_readl(SYS_POWERCTRL);
+		au_writel(bclk | 0x60, SYS_POWERCTRL);
+		printk(KERN_INFO "BCLK switching enabled!\n");
+	}
+
+	if (sp->cpu_od)
+		/* Various early Au1xx0 errata corrected by this */
+		set_c0_config(1 << 19); /* Set Config[OD] */
+	else
+		/* Clear to obtain best system bus performance */
+		clear_c0_config(1 << 19); /* Clear Config[OD] */
+
+	argptr = prom_getcmdline();
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+	argptr = strstr(argptr, "console=");
+	if (argptr == NULL) {
+		argptr = prom_getcmdline();
+		strcat(argptr, " console=ttyS0,115200");
+	}
+#endif
+
+#ifdef CONFIG_FB_AU1100
+	argptr = strstr(argptr, "video=");
+	if (argptr == NULL) {
+		argptr = prom_getcmdline();
+		/* default panel */
+		/*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
+	}
+#endif
+
+#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
+	/* au1000 does not support vra, au1500 and au1100 do */
+	strcat(argptr, " au1000_audio=vra");
+	argptr = prom_getcmdline();
+#endif
+	_machine_restart = au1000_restart;
+	_machine_halt = au1000_halt;
+	pm_power_off = au1000_power_off;
+
+	/* IO/MEM resources. */
+	set_io_port_base(0);
+	ioport_resource.start = IOPORT_RESOURCE_START;
+	ioport_resource.end = IOPORT_RESOURCE_END;
+	iomem_resource.start = IOMEM_RESOURCE_START;
+	iomem_resource.end = IOMEM_RESOURCE_END;
+
+	while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_E0S);
+	au_writel(SYS_CNTRL_E0 | SYS_CNTRL_EN0, SYS_COUNTER_CNTRL);
+	au_sync();
+	while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T0S);
+	au_writel(0, SYS_TOYTRIM);
+}
+
+#if defined(CONFIG_64BIT_PHYS_ADDR)
+/* This routine should be valid for all Au1x based boards */
+phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+{
+	/* Don't fixup 36-bit addresses */
+	if ((phys_addr >> 32) != 0)
+		return phys_addr;
+
+#ifdef CONFIG_PCI
+	{
+		u32 start = (u32)Au1500_PCI_MEM_START;
+		u32 end   = (u32)Au1500_PCI_MEM_END;
+
+		/* Check for PCI memory window */
+		if (phys_addr >= start && (phys_addr + size - 1) <= end)
+			return (phys_t)
+			       ((phys_addr - start) + Au1500_PCI_MEM_START);
+	}
+#endif
+
+	/*
+	 * All Au1xx0 SOCs have a PCMCIA controller.
+	 * We setup our 32-bit pseudo addresses to be equal to the
+	 * 36-bit addr >> 4, to make it easier to check the address
+	 * and fix it.
+	 * The PCMCIA socket 0 physical attribute address is 0xF 4000 0000.
+	 * The pseudo address we use is 0xF400 0000. Any address over
+	 * 0xF400 0000 is a PCMCIA pseudo address.
+	 */
+	if ((phys_addr >= 0xF4000000) && (phys_addr < 0xFFFFFFFF))
+		return (phys_t)(phys_addr << 4);
+
+	/* default nop */
+	return phys_addr;
+}
+EXPORT_SYMBOL(__fixup_bigphys_addr);
+#endif