Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (53 commits)
  [MIPS] sparsemem: fix crash in show_mem
  [MIPS] vr41xx: Update workpad setup function
  [MIPS] vr41xx: Update e55 setup function
  [MIPS] vr41xx: Removed old v2.4 VRC4173 driver
  [MIPS] vr41xx: Move IRQ numbers to asm-mips/vr41xx/irq.h
  [MIPS] MIPSsim: Build fix, rename sim_timer_setup -> plat_timer_setup.
  [MIPS] Remove unused code.
  [MIPS] IP22 Fix brown paper bag in RTC code.
  [MIPS] Atlas, Malta, SEAD: Don't disable interrupts in mips_time_init().
  [MIPS] Replace board_timer_setup function pointer by plat_timer_setup.
  [MIPS] Nuke redeclarations of board_time_init.
  [MIPS] Remove redeclarations of setup_irq().
  [MIPS] Nuke redeclarations of board_timer_setup.
  [MIPS] Print out TLB handler assembly for debugging.
  [MIPS] SMTC: Reformat to Linux style.
  [MIPS] MIPSsim: Delete redeclaration of ll_local_timer_interrupt.
  [MIPS] IP27: Reformatting.
  [MIPS] IP27: Invoke setup_irq for timer interrupt so proc stats will be shown.
  [MIPS] IP27: irq_chip startup method returns unsigned int.
  [MIPS] IP27: struct irq_desc member handler was renamed to chip.
  ...

1 files changed, 0 insertions, 238 deletions

diff --git a/arch/mips/au1000/csb250/board_setup.c b/arch/mips/au1000/csb250/board_setup.c
deleted file mode 100644
index 348c3024d3d1..000000000000
--- a/arch/mips/au1000/csb250/board_setup.c
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	Cogent CSB250 board setup.
- *
- * Copyright 2002 Cogent Computer Systems, Inc.
- *	dan@embeddededge.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/mc146818rtc.h>
-#include <linux/delay.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/keyboard.h>
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/pgtable.h>
-#include <asm/au1000.h>
-#include <asm/csb250.h>
-
-extern int (*board_pci_idsel)(unsigned int devsel, int assert);
-int	csb250_pci_idsel(unsigned int devsel, int assert);
-
-void __init board_setup(void)
-{
-	u32 pin_func, pin_val;
-	u32 sys_freqctrl, sys_clksrc;
-
-
-	// set AUX clock to 12MHz * 8 = 96 MHz
-	au_writel(8, SYS_AUXPLL);
-	au_writel(0, SYS_PINSTATERD);
-	udelay(100);
-
-#if defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE)
-
-	/* GPIO201 is input for PCMCIA card detect */
-	/* GPIO203 is input for PCMCIA interrupt request */
-	au_writel(au_readl(GPIO2_DIR) & (u32)(~((1<<1)|(1<<3))), GPIO2_DIR);
-
-	/* zero and disable FREQ2 */
-	sys_freqctrl = au_readl(SYS_FREQCTRL0);
-	sys_freqctrl &= ~0xFFF00000;
-	au_writel(sys_freqctrl, SYS_FREQCTRL0);
-
-	/* zero and disable USBH/USBD clocks */
-	sys_clksrc = au_readl(SYS_CLKSRC);
-	sys_clksrc &= ~0x00007FE0;
-	au_writel(sys_clksrc, SYS_CLKSRC);
-
-	sys_freqctrl = au_readl(SYS_FREQCTRL0);
-	sys_freqctrl &= ~0xFFF00000;
-
-	sys_clksrc = au_readl(SYS_CLKSRC);
-	sys_clksrc &= ~0x00007FE0;
-
-	// FREQ2 = aux/2 = 48 MHz
-	sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20));
-	au_writel(sys_freqctrl, SYS_FREQCTRL0);
-
-	/*
-	 * Route 48MHz FREQ2 into USB Host and/or Device
-	 */
-#ifdef CONFIG_USB_OHCI
-	sys_clksrc |= ((4<<12) | (0<<11) | (0<<10));
-#endif
-#ifdef CONFIG_AU1X00_USB_DEVICE
-	sys_clksrc |= ((4<<7) | (0<<6) | (0<<5));
-#endif
-	au_writel(sys_clksrc, SYS_CLKSRC);
-
-
-	pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
-#ifndef CONFIG_AU1X00_USB_DEVICE
-	// 2nd USB port is USB host
-	pin_func |= 0x8000;
-#endif
-	au_writel(pin_func, SYS_PINFUNC);
-#endif // defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE)
-
-	/* Configure GPIO2....it's used by PCI among other things.
-	*/
-
-	/* Make everything but GP200 (PCI RST) an input until we get
-	 * the pins set correctly.
-	 */
-	au_writel(0x00000001, GPIO2_DIR);
-
-	/* Set the pins used for output.
-	 * A zero bit will leave PCI reset, LEDs off, power up USB,
-	 * IDSEL disabled.
-	 */
-	pin_val = ((3 << 30) | (7 << 19) | (1 << 17) | (1 << 16));
-	au_writel(pin_val, GPIO2_OUTPUT);
-
-	/* Set the output direction.
-	*/
-	pin_val = ((3 << 14) | (7 << 3) | (1 << 1) | (1 << 0));
-	au_writel(pin_val, GPIO2_DIR);
-
-#ifdef CONFIG_PCI
-	/* Use FREQ1 for the PCI output clock.  We use the
-	 * CPU clock of 384 MHz divided by 12 to get 32 MHz PCI.
-	 * If Michael changes the CPU speed, we need to adjust
-	 * that here as well :-).
-	 */
-
-	/* zero and disable FREQ1
-	*/
-	sys_freqctrl = au_readl(SYS_FREQCTRL0);
-	sys_freqctrl &= ~0x000ffc00;
-	au_writel(sys_freqctrl, SYS_FREQCTRL0);
-
-	/* zero and disable PCI clock
-	*/
-	sys_clksrc = au_readl(SYS_CLKSRC);
-	sys_clksrc &= ~0x000f8000;
-	au_writel(sys_clksrc, SYS_CLKSRC);
-
-	/* Get current values (which really should match above).
-	*/
-	sys_freqctrl = au_readl(SYS_FREQCTRL0);
-	sys_freqctrl &= ~0x000ffc00;
-
-	sys_clksrc = au_readl(SYS_CLKSRC);
-	sys_clksrc &= ~0x000f8000;
-
-	/* FREQ1 = cpu/12 = 32 MHz
-	*/
-	sys_freqctrl |= ((5<<12) | (1<<11) | (0<<10));
-	au_writel(sys_freqctrl, SYS_FREQCTRL0);
-
-	/* Just connect the clock without further dividing.
-	*/
-	sys_clksrc |= ((3<<17) | (0<<16) | (0<<15));
-	au_writel(sys_clksrc, SYS_CLKSRC);
-
-	udelay(1);
-
-	/* Now that clocks should be running, take PCI out of reset.
-	*/
-	pin_val = au_readl(GPIO2_OUTPUT);
-	pin_val |= ((1 << 16) | 1);
-	au_writel(pin_val, GPIO2_OUTPUT);
-
-	// Setup PCI bus controller
-	au_writel(0, Au1500_PCI_CMEM);
-	au_writel(0x00003fff, Au1500_CFG_BASE);
-
-	/* We run big endian without any of the software byte swapping,
-	 * so configure the PCI bridge to help us out.
-	 */
-	au_writel(0xf | (2<<6) | (1<<5) | (1<<4), Au1500_PCI_CFG);
-
-	au_writel(0xf0000000, Au1500_PCI_MWMASK_DEV);
-	au_writel(0, Au1500_PCI_MWBASE_REV_CCL);
-	au_writel(0x02a00356, Au1500_PCI_STATCMD);
-	au_writel(0x00003c04, Au1500_PCI_HDRTYPE);
-	au_writel(0x00000008, Au1500_PCI_MBAR);
-	au_sync();
-
-	board_pci_idsel = csb250_pci_idsel;
-#endif
-
-	/* Enable sys bus clock divider when IDLE state or no bus activity. */
-	au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
-
-#ifdef CONFIG_RTC
-	// Enable the RTC if not already enabled
-	if (!(au_readl(0xac000028) & 0x20)) {
-		printk("enabling clock ...\n");
-		au_writel((au_readl(0xac000028) | 0x20), 0xac000028);
-	}
-	// Put the clock in BCD mode
-	if (readl(0xac00002C) & 0x4) { /* reg B */
-		au_writel(au_readl(0xac00002c) & ~0x4, 0xac00002c);
-		au_sync();
-	}
-#endif
-}
-
-/* The IDSEL is selected in the GPIO2 register.  We will make device
- * 12 appear in slot 0 and device 13 appear in slot 1.
- */
-int
-csb250_pci_idsel(unsigned int devsel, int assert)
-{
-	int		retval;
-	unsigned int	gpio2_pins;
-
-	retval = 1;
-
-	/* First, disable both selects, then assert the one requested.
-	*/
-	au_writel(0xc000c000, GPIO2_OUTPUT);
-	au_sync();
-
-	if (assert) {
-		if (devsel == 12)
-			gpio2_pins = 0x40000000;
-		else if (devsel == 13)
-			gpio2_pins = 0x80000000;
-		else {
-			gpio2_pins = 0xc000c000;
-			retval = 0;
-		}
-		au_writel(gpio2_pins, GPIO2_OUTPUT);
-	}
-	au_sync();
-
-	return retval;
-}