MIPS: Move headfiles to new location below arch/mips/include

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 259 insertions, 0 deletions

diff --git a/arch/mips/include/asm/mach-pb1x00/pb1200.h b/arch/mips/include/asm/mach-pb1x00/pb1200.h
new file mode 100644
index 000000000000..c8618df88cb5
--- /dev/null
+++ b/arch/mips/include/asm/mach-pb1x00/pb1200.h
@@ -0,0 +1,259 @@
+/*
+ * AMD Alchemy Pb1200 Referrence Board
+ * Board Registers defines.
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_PB1200_H
+#define __ASM_PB1200_H
+
+#include <linux/types.h>
+#include <asm/mach-au1x00/au1xxx_psc.h>
+
+#define DBDMA_AC97_TX_CHAN	DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN	DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN	DSCR_CMD0_PSC1_TX
+#define DBDMA_I2S_RX_CHAN	DSCR_CMD0_PSC1_RX
+
+/*
+ * SPI and SMB are muxed on the Pb1200 board.
+ * Refer to board documentation.
+ */
+#define SPI_PSC_BASE		PSC0_BASE_ADDR
+#define SMBUS_PSC_BASE		PSC0_BASE_ADDR
+/*
+ * AC97 and I2S are muxed on the Pb1200 board.
+ * Refer to board documentation.
+ */
+#define AC97_PSC_BASE       PSC1_BASE_ADDR
+#define I2S_PSC_BASE		PSC1_BASE_ADDR
+
+#define BCSR_KSEG1_ADDR 0xAD800000
+
+typedef volatile struct
+{
+	/*00*/	u16 whoami;
+		u16 reserved0;
+	/*04*/	u16 status;
+		u16 reserved1;
+	/*08*/	u16 switches;
+		u16 reserved2;
+	/*0C*/	u16 resets;
+		u16 reserved3;
+
+	/*10*/	u16 pcmcia;
+		u16 reserved4;
+	/*14*/	u16 board;
+		u16 reserved5;
+	/*18*/	u16 disk_leds;
+		u16 reserved6;
+	/*1C*/	u16 system;
+		u16 reserved7;
+
+	/*20*/	u16 intclr;
+		u16 reserved8;
+	/*24*/	u16 intset;
+		u16 reserved9;
+	/*28*/	u16 intclr_mask;
+		u16 reserved10;
+	/*2C*/	u16 intset_mask;
+		u16 reserved11;
+
+	/*30*/	u16 sig_status;
+		u16 reserved12;
+	/*34*/	u16 int_status;
+		u16 reserved13;
+	/*38*/	u16 reserved14;
+		u16 reserved15;
+	/*3C*/	u16 reserved16;
+		u16 reserved17;
+
+} BCSR;
+
+static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+/*
+ * Register bit definitions for the BCSRs
+ */
+#define BCSR_WHOAMI_DCID	0x000F
+#define BCSR_WHOAMI_CPLD	0x00F0
+#define BCSR_WHOAMI_BOARD	0x0F00
+
+#define BCSR_STATUS_PCMCIA0VS	0x0003
+#define BCSR_STATUS_PCMCIA1VS	0x000C
+#define BCSR_STATUS_SWAPBOOT	0x0040
+#define BCSR_STATUS_FLASHBUSY	0x0100
+#define BCSR_STATUS_IDECBLID	0x0200
+#define BCSR_STATUS_SD0WP	0x0400
+#define BCSR_STATUS_SD1WP	0x0800
+#define BCSR_STATUS_U0RXD	0x1000
+#define BCSR_STATUS_U1RXD	0x2000
+
+#define BCSR_SWITCHES_OCTAL	0x00FF
+#define BCSR_SWITCHES_DIP_1	0x0080
+#define BCSR_SWITCHES_DIP_2	0x0040
+#define BCSR_SWITCHES_DIP_3	0x0020
+#define BCSR_SWITCHES_DIP_4	0x0010
+#define BCSR_SWITCHES_DIP_5	0x0008
+#define BCSR_SWITCHES_DIP_6	0x0004
+#define BCSR_SWITCHES_DIP_7	0x0002
+#define BCSR_SWITCHES_DIP_8	0x0001
+#define BCSR_SWITCHES_ROTARY	0x0F00
+
+#define BCSR_RESETS_ETH		0x0001
+#define BCSR_RESETS_CAMERA	0x0002
+#define BCSR_RESETS_DC		0x0004
+#define BCSR_RESETS_IDE		0x0008
+/* not resets but in the same register */
+#define BCSR_RESETS_WSCFSM	0x0800
+#define BCSR_RESETS_PCS0MUX	0x1000
+#define BCSR_RESETS_PCS1MUX	0x2000
+#define BCSR_RESETS_SPISEL	0x4000
+#define BCSR_RESETS_SD1MUX	0x8000
+
+#define BCSR_PCMCIA_PC0VPP	0x0003
+#define BCSR_PCMCIA_PC0VCC	0x000C
+#define BCSR_PCMCIA_PC0DRVEN	0x0010
+#define BCSR_PCMCIA_PC0RST	0x0080
+#define BCSR_PCMCIA_PC1VPP	0x0300
+#define BCSR_PCMCIA_PC1VCC	0x0C00
+#define BCSR_PCMCIA_PC1DRVEN	0x1000
+#define BCSR_PCMCIA_PC1RST	0x8000
+
+#define BCSR_BOARD_LCDVEE	0x0001
+#define BCSR_BOARD_LCDVDD	0x0002
+#define BCSR_BOARD_LCDBL	0x0004
+#define BCSR_BOARD_CAMSNAP	0x0010
+#define BCSR_BOARD_CAMPWR	0x0020
+#define BCSR_BOARD_SD0PWR	0x0040
+#define BCSR_BOARD_SD1PWR	0x0080
+
+#define BCSR_LEDS_DECIMALS	0x00FF
+#define BCSR_LEDS_LED0		0x0100
+#define BCSR_LEDS_LED1		0x0200
+#define BCSR_LEDS_LED2		0x0400
+#define BCSR_LEDS_LED3		0x0800
+
+#define BCSR_SYSTEM_VDDI	0x001F
+#define BCSR_SYSTEM_POWEROFF	0x4000
+#define BCSR_SYSTEM_RESET	0x8000
+
+/* Bit positions for the different interrupt sources */
+#define BCSR_INT_IDE		0x0001
+#define BCSR_INT_ETH		0x0002
+#define BCSR_INT_PC0		0x0004
+#define BCSR_INT_PC0STSCHG	0x0008
+#define BCSR_INT_PC1		0x0010
+#define BCSR_INT_PC1STSCHG	0x0020
+#define BCSR_INT_DC		0x0040
+#define BCSR_INT_FLASHBUSY	0x0080
+#define BCSR_INT_PC0INSERT	0x0100
+#define BCSR_INT_PC0EJECT	0x0200
+#define BCSR_INT_PC1INSERT	0x0400
+#define BCSR_INT_PC1EJECT	0x0800
+#define BCSR_INT_SD0INSERT	0x1000
+#define BCSR_INT_SD0EJECT	0x2000
+#define BCSR_INT_SD1INSERT	0x4000
+#define BCSR_INT_SD1EJECT	0x8000
+
+#define SMC91C111_PHYS_ADDR	0x0D000300
+#define SMC91C111_INT		PB1200_ETH_INT
+
+#define IDE_PHYS_ADDR		0x0C800000
+#define IDE_REG_SHIFT		5
+#define IDE_PHYS_LEN		(16 << IDE_REG_SHIFT)
+#define IDE_INT 		PB1200_IDE_INT
+#define IDE_DDMA_REQ		DSCR_CMD0_DMA_REQ1
+#define IDE_RQSIZE		128
+
+#define NAND_PHYS_ADDR 	0x1C000000
+
+/*
+ * Timing values as described in databook, * ns value stripped of
+ * lower 2 bits.
+ * These defines are here rather than an Au1200 generic file because
+ * the parts chosen on another board may be different and may require
+ * different timings.
+ */
+#define NAND_T_H		(18 >> 2)
+#define NAND_T_PUL		(30 >> 2)
+#define NAND_T_SU		(30 >> 2)
+#define NAND_T_WH		(30 >> 2)
+
+/* Bitfield shift amounts */
+#define NAND_T_H_SHIFT		0
+#define NAND_T_PUL_SHIFT	4
+#define NAND_T_SU_SHIFT		8
+#define NAND_T_WH_SHIFT		12
+
+#define NAND_TIMING	(((NAND_T_H   & 0xF) << NAND_T_H_SHIFT)   | \
+			 ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
+			 ((NAND_T_SU  & 0xF) << NAND_T_SU_SHIFT)  | \
+			 ((NAND_T_WH  & 0xF) << NAND_T_WH_SHIFT))
+
+/*
+ * External Interrupts for Pb1200 as of 8/6/2004.
+ * Bit positions in the CPLD registers can be calculated by taking
+ * the interrupt define and subtracting the PB1200_INT_BEGIN value.
+ *
+ *   Example: IDE bis pos is  = 64 - 64
+ *            ETH bit pos is  = 65 - 64
+ */
+enum external_pb1200_ints {
+	PB1200_INT_BEGIN	= AU1000_MAX_INTR + 1,
+
+	PB1200_IDE_INT		= PB1200_INT_BEGIN,
+	PB1200_ETH_INT,
+	PB1200_PC0_INT,
+	PB1200_PC0_STSCHG_INT,
+	PB1200_PC1_INT,
+	PB1200_PC1_STSCHG_INT,
+	PB1200_DC_INT,
+	PB1200_FLASHBUSY_INT,
+	PB1200_PC0_INSERT_INT,
+	PB1200_PC0_EJECT_INT,
+	PB1200_PC1_INSERT_INT,
+	PB1200_PC1_EJECT_INT,
+	PB1200_SD0_INSERT_INT,
+	PB1200_SD0_EJECT_INT,
+	PB1200_SD1_INSERT_INT,
+	PB1200_SD1_EJECT_INT,
+
+	PB1200_INT_END		= PB1200_INT_BEGIN + 15
+};
+
+/*
+ * Pb1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c
+ */
+#define PCMCIA_MAX_SOCK  1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT) \
+	((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
+
+#define BOARD_PC0_INT	PB1200_PC0_INT
+#define BOARD_PC1_INT	PB1200_PC1_INT
+#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET)))
+
+/* NAND chip select */
+#define NAND_CS 1
+
+#endif /* __ASM_PB1200_H */