[MIPS] Sibyte: Finish conversion to modern time APIs.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

6 files changed, 82 insertions, 167 deletions

diff --git a/arch/mips/sibyte/bcm1480/smp.c b/arch/mips/sibyte/bcm1480/smp.c
index 6eac36d1b8c8..02b266a31c46 100644
--- a/arch/mips/sibyte/bcm1480/smp.c
+++ b/arch/mips/sibyte/bcm1480/smp.c
@@ -69,8 +69,9 @@ void bcm1480_smp_init(void)
 
 void bcm1480_smp_finish(void)
 {
-	extern void bcm1480_time_init(void);
-	bcm1480_time_init();
+	extern void sb1480_clockevent_init(void);
+
+	sb1480_clockevent_init();
 	local_irq_enable();
 }
 
diff --git a/arch/mips/sibyte/bcm1480/time.c b/arch/mips/sibyte/bcm1480/time.c
index 5b4bfbbb5a24..c730744aa474 100644
--- a/arch/mips/sibyte/bcm1480/time.c
+++ b/arch/mips/sibyte/bcm1480/time.c
@@ -27,9 +27,8 @@
  */
 #include <linux/clockchips.h>
 #include <linux/interrupt.h>
-#include <linux/sched.h>
+#include <linux/percpu.h>
 #include <linux/spinlock.h>
-#include <linux/kernel_stat.h>
 
 #include <asm/irq.h>
 #include <asm/addrspace.h>
@@ -101,25 +100,36 @@ static void sibyte_set_mode(enum clock_event_mode mode,
 		break;
 
 	case CLOCK_EVT_MODE_UNUSED:	/* shuddup gcc */
+	case CLOCK_EVT_MODE_RESUME:
 		;
 	}
 }
 
-struct clock_event_device sibyte_hpt_clockevent = {
-	.name		= "bcm1480-counter",
-	.features	= CLOCK_EVT_FEAT_PERIODIC,
-	.set_mode	= sibyte_set_mode,
-	.shift		= 32,
-	.irq		= 0,
-};
+static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
+{
+	unsigned int cpu = smp_processor_id();
+	void __iomem *timer_init;
+	unsigned int cnt;
+	int res;
+
+	timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
+	cnt = __raw_readq(timer_init);
+	cnt += delta;
+	__raw_writeq(cnt, timer_init);
+	res = ((long)(__raw_readq(timer_init) - cnt ) > 0) ? -ETIME : 0;
+
+	return res;
+}
+
+static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
 
 static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
 {
-	struct clock_event_device *cd = &sibyte_hpt_clockevent;
 	unsigned int cpu = smp_processor_id();
+	struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
 
 	/* Reset the timer */
-	__raw_writeq(M_SCD_TIMER_ENABLE|M_SCD_TIMER_MODE_CONTINUOUS,
+	__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
 	             IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
 	cd->event_handler(cd);
 
@@ -140,24 +150,21 @@ static struct irqaction sibyte_counter_irqaction = {
  * called directly from irq_handler.S when IP[4] is set during an
  * interrupt
  */
-static void __init sb1480_clockevent_init(void)
+void __cpuinit sb1480_clockevent_init(void)
 {
 	unsigned int cpu = smp_processor_id();
 	unsigned int irq = K_BCM1480_INT_TIMER_0 + cpu;
+	struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
 
-	setup_irq(irq, &sibyte_counter_irqaction);
-}
+	cd->name		= "bcm1480-counter";
+	cd->features		= CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_MODE_ONESHOT;
+	cd->set_next_event	= sibyte_next_event;
+	cd->set_mode		= sibyte_set_mode;
+	cd->irq			= irq;
+	clockevent_set_clock(cd, BCM1480_HPT_VALUE);
 
-void bcm1480_timer_interrupt(void)
-{
-	int cpu = smp_processor_id();
-	int irq = K_BCM1480_INT_TIMER_0 + cpu;
-
-	/* Reset the timer */
-	__raw_writeq(M_SCD_TIMER_ENABLE|M_SCD_TIMER_MODE_CONTINUOUS,
-	      IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
-
-	ll_timer_interrupt(irq);
+	setup_irq(irq, &sibyte_counter_irqaction);
 }
 
 static cycle_t bcm1480_hpt_read(void)
@@ -168,9 +175,26 @@ static cycle_t bcm1480_hpt_read(void)
 	return (jiffies + 1) * (BCM1480_HPT_VALUE / HZ) - count;
 }
 
+struct clocksource bcm1480_clocksource = {
+	.name	= "MIPS",
+	.rating	= 200,
+	.read	= bcm1480_hpt_read,
+	.mask	= CLOCKSOURCE_MASK(32),
+	.shift	= 32,
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+void __init sb1480_clocksource_init(void)
+{
+	struct clocksource *cs = &bcm1480_clocksource;
+
+	clocksource_set_clock(cs, BCM1480_HPT_VALUE);
+	clocksource_register(cs);
+}
+
 void __init bcm1480_hpt_setup(void)
 {
-	clocksource_mips.read = bcm1480_hpt_read;
 	mips_hpt_frequency = BCM1480_HPT_VALUE;
+	sb1480_clocksource_init();
 	sb1480_clockevent_init();
 }
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index 7659174819c6..500d17e84c09 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -400,43 +400,11 @@ static void sb1250_kgdb_interrupt(void)
 
 #endif 	/* CONFIG_KGDB */
 
-static inline void sb1250_timer_interrupt(void)
-{
-	int cpu = smp_processor_id();
-	int irq = K_INT_TIMER_0 + cpu;
-
-	irq_enter();
-	kstat_this_cpu.irqs[irq]++;
-
-	write_seqlock(&xtime_lock);
-
-	/* ACK interrupt */
-	____raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
-		       IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
-
-	/*
-	 * call the generic timer interrupt handling
-	 */
-	do_timer(1);
-
-	write_sequnlock(&xtime_lock);
-
-	/*
-	 * In UP mode, we call local_timer_interrupt() to do profiling
-	 * and process accouting.
-	 *
-	 * In SMP mode, local_timer_interrupt() is invoked by appropriate
-	 * low-level local timer interrupt handler.
-	 */
-	local_timer_interrupt(irq);
-
-	irq_exit();
-}
-
 extern void sb1250_mailbox_interrupt(void);
 
 asmlinkage void plat_irq_dispatch(void)
 {
+	unsigned int cpu = smp_processor_id();
 	unsigned int pending;
 
 	/*
@@ -454,7 +422,7 @@ asmlinkage void plat_irq_dispatch(void)
 	if (pending & CAUSEF_IP7) /* CPU performance counter interrupt */
 		do_IRQ(MIPS_CPU_IRQ_BASE + 7);
 	else if (pending & CAUSEF_IP4)
-		sb1250_timer_interrupt();
+		do_IRQ(K_INT_TIMER_0 + cpu); 	/* sb1250_timer_interrupt() */
 
 #ifdef CONFIG_SMP
 	else if (pending & CAUSEF_IP3)
diff --git a/arch/mips/sibyte/sb1250/smp.c b/arch/mips/sibyte/sb1250/smp.c
index c38e1f34460d..aaa4f30dda79 100644
--- a/arch/mips/sibyte/sb1250/smp.c
+++ b/arch/mips/sibyte/sb1250/smp.c
@@ -57,8 +57,9 @@ void sb1250_smp_init(void)
 
 void sb1250_smp_finish(void)
 {
-	extern void sb1250_time_init(void);
-	sb1250_time_init();
+	extern void sb1250_clockevent_init(void);
+
+	sb1250_clockevent_init();
 	local_irq_enable();
 }
 
diff --git a/arch/mips/sibyte/sb1250/time.c b/arch/mips/sibyte/sb1250/time.c
index fe11fed8e0d7..9ef54628bc9c 100644
--- a/arch/mips/sibyte/sb1250/time.c
+++ b/arch/mips/sibyte/sb1250/time.c
@@ -100,6 +100,7 @@ static void sibyte_set_mode(enum clock_event_mode mode,
 		break;
 
 	case CLOCK_EVT_MODE_UNUSED:	/* shuddup gcc */
+	case CLOCK_EVT_MODE_RESUME:
 		;
 	}
 }
@@ -144,79 +145,7 @@ static struct irqaction sibyte_irqaction = {
 	.name		= "timer",
 };
 
-/*
- * The general purpose timer ticks at 1 Mhz independent if
- * the rest of the system
- */
-static void sibyte_set_mode(enum clock_event_mode mode,
-                           struct clock_event_device *evt)
-{
-	unsigned int cpu = smp_processor_id();
-	void __iomem *timer_cfg, *timer_init;
-
-	timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
-	timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		__raw_writeq(0, timer_cfg);
-		__raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, timer_init);
-		__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
-			     timer_cfg);
-		break;
-
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* Stop the timer until we actually program a shot */
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		__raw_writeq(0, timer_cfg);
-		break;
-
-	case CLOCK_EVT_MODE_UNUSED:	/* shuddup gcc */
-		;
-	}
-}
-
-static int
-sibyte_next_event(unsigned long delta, struct clock_event_device *evt)
-{
-	unsigned int cpu = smp_processor_id();
-	void __iomem *timer_cfg, *timer_init;
-
-	timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
-	timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
-
-	__raw_writeq(0, timer_cfg);
-	__raw_writeq(delta, timer_init);
-	__raw_writeq(M_SCD_TIMER_ENABLE, timer_cfg);
-
-	return 0;
-}
-
-struct clock_event_device sibyte_hpt_clockevent = {
-	.name		= "sb1250-counter",
-	.features	= CLOCK_EVT_FEAT_PERIODIC,
-	.set_mode	= sibyte_set_mode,
-	.set_next_event	= sibyte_next_event,
-	.shift		= 32,
-	.irq		= 0,
-};
-
-static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
-{
-	struct clock_event_device *cd = &sibyte_hpt_clockevent;
-
-	cd->event_handler(cd);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction sibyte_irqaction = {
-	.handler	= sibyte_counter_handler,
-	.flags		= IRQF_DISABLED | IRQF_PERCPU,
-	.name		= "timer",
-};
-
-static void __init sb1250_clockevent_init(void)
+void __cpuinit sb1250_clockevent_init(void)
 {
 	struct clock_event_device *cd = &sibyte_hpt_clockevent;
 	unsigned int cpu = smp_processor_id();
@@ -249,12 +178,6 @@ static void __init sb1250_clockevent_init(void)
 	clockevents_register_device(cd);
 }
 
-void __init plat_time_init(void)
-{
-	sb1250_clocksource_init();
-	sb1250_clockevent_init();
-}
-
 /*
  * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
  * again.
@@ -267,3 +190,26 @@ static cycle_t sb1250_hpt_read(void)
 
 	return SB1250_HPT_VALUE - count;
 }
+
+struct clocksource bcm1250_clocksource = {
+	.name	= "MIPS",
+	.rating	= 200,
+	.read	= sb1250_hpt_read,
+	.mask	= CLOCKSOURCE_MASK(32),
+	.shift	= 32,
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+void __init sb1250_clocksource_init(void)
+{
+	struct clocksource *cs = &bcm1250_clocksource;
+
+	clocksource_set_clock(cs, V_SCD_TIMER_FREQ);
+	clocksource_register(cs);
+}
+
+void __init plat_time_init(void)
+{
+	sb1250_clocksource_init();
+	sb1250_clockevent_init();
+}
diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c
index 8b3ef0e4cd55..080c966263b7 100644
--- a/arch/mips/sibyte/swarm/setup.c
+++ b/arch/mips/sibyte/swarm/setup.c
@@ -69,31 +69,6 @@ const char *get_system_type(void)
 	return "SiByte " SIBYTE_BOARD_NAME;
 }
 
-void __init plat_time_init(void)
-{
-#if defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
-	/* Setup HPT */
-	sb1250_hpt_setup();
-#endif
-}
-
-void __init plat_timer_setup(struct irqaction *irq)
-{
-        /*
-         * we don't set up irqaction, because we will deliver timer
-         * interrupts through low-level (direct) meachanism.
-         */
-
-        /* We only need to setup the generic timer */
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
-	bcm1480_time_init();
-#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
-	sb1250_time_init();
-#else
-#error invalid SiByte board configuration
-#endif
-}
-
 int swarm_be_handler(struct pt_regs *regs, int is_fixup)
 {
 	if (!is_fixup && (regs->cp0_cause & 4)) {