summaryrefslogtreecommitdiffstats
path: root/arch/mips
diff options
context:
space:
mode:
authorRafał Miłecki <zajec5@gmail.com>2015-06-10 23:05:08 +0200
committerRalf Baechle <ralf@linux-mips.org>2015-06-21 21:55:33 +0200
commitf6e734a8c162297953d7bfc0f3f6bf4f8c33d72f (patch)
tree285ec89e3f7d713f42f66cd1ba16dc637976c26f /arch/mips
parent1e51714c81e11bd0ffbb2b0724a1f66ce58608a5 (diff)
downloadlinux-f6e734a8c162297953d7bfc0f3f6bf4f8c33d72f.tar.gz
linux-f6e734a8c162297953d7bfc0f3f6bf4f8c33d72f.tar.bz2
linux-f6e734a8c162297953d7bfc0f3f6bf4f8c33d72f.zip
MIPS: BCM47xx: Move NVRAM driver to the drivers/firmware/
After Broadcom switched from MIPS to ARM for their home routers we need to have NVRAM driver in some common place (not arch/mips/). As explained in Kconfig, this driver is responsible for parsing SoC configuration data that is passed to the kernel in flash from the bootloader firmware called "CFE". We were thinking about putting it in bus directory, however there are two possible buses for MIPS: drivers/ssb/ and drivers/bcma/. So this won't fit there and this is why I would like to move this driver to the drivers/firmware/. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Reviewed-by: Paul Walmsley <paul@pwsan.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Mike Waychison <mikew@google.com> Cc: Roy Franz <roy.franz@linaro.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Patchwork: https://patchwork.linux-mips.org/patch/10544/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch/mips')
-rw-r--r--arch/mips/Kconfig1
-rw-r--r--arch/mips/bcm47xx/Makefile2
-rw-r--r--arch/mips/bcm47xx/nvram.c246
3 files changed, 2 insertions, 247 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index d53b43237f7f..dbb1a1d0f9b3 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -190,6 +190,7 @@ config BCM47XX
select USE_GENERIC_EARLY_PRINTK_8250
select GPIOLIB
select LEDS_GPIO_REGISTER
+ select BCM47XX_NVRAM
help
Support for BCM47XX based boards
diff --git a/arch/mips/bcm47xx/Makefile b/arch/mips/bcm47xx/Makefile
index d58c51b5e501..66bea4ecf449 100644
--- a/arch/mips/bcm47xx/Makefile
+++ b/arch/mips/bcm47xx/Makefile
@@ -3,5 +3,5 @@
# under Linux.
#
-obj-y += irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
+obj-y += irq.o prom.o serial.o setup.o time.o sprom.o
obj-y += board.o buttons.o leds.o workarounds.o
diff --git a/arch/mips/bcm47xx/nvram.c b/arch/mips/bcm47xx/nvram.c
deleted file mode 100644
index 9ccdce816f84..000000000000
--- a/arch/mips/bcm47xx/nvram.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * BCM947xx nvram variable access
- *
- * Copyright (C) 2005 Broadcom Corporation
- * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
- * Copyright (C) 2010-2012 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/io.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/mtd/mtd.h>
-#include <linux/bcm47xx_nvram.h>
-
-#define NVRAM_MAGIC 0x48534C46 /* 'FLSH' */
-#define NVRAM_SPACE 0x10000
-#define NVRAM_MAX_GPIO_ENTRIES 32
-#define NVRAM_MAX_GPIO_VALUE_LEN 30
-
-#define FLASH_MIN 0x00020000 /* Minimum flash size */
-
-struct nvram_header {
- u32 magic;
- u32 len;
- u32 crc_ver_init; /* 0:7 crc, 8:15 ver, 16:31 sdram_init */
- u32 config_refresh; /* 0:15 sdram_config, 16:31 sdram_refresh */
- u32 config_ncdl; /* ncdl values for memc */
-};
-
-static char nvram_buf[NVRAM_SPACE];
-static size_t nvram_len;
-static const u32 nvram_sizes[] = {0x8000, 0xF000, 0x10000};
-
-static u32 find_nvram_size(void __iomem *end)
-{
- struct nvram_header __iomem *header;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(nvram_sizes); i++) {
- header = (struct nvram_header *)(end - nvram_sizes[i]);
- if (header->magic == NVRAM_MAGIC)
- return nvram_sizes[i];
- }
-
- return 0;
-}
-
-/* Probe for NVRAM header */
-static int nvram_find_and_copy(void __iomem *iobase, u32 lim)
-{
- struct nvram_header __iomem *header;
- int i;
- u32 off;
- u32 *src, *dst;
- u32 size;
-
- if (nvram_len) {
- pr_warn("nvram already initialized\n");
- return -EEXIST;
- }
-
- /* TODO: when nvram is on nand flash check for bad blocks first. */
- off = FLASH_MIN;
- while (off <= lim) {
- /* Windowed flash access */
- size = find_nvram_size(iobase + off);
- if (size) {
- header = (struct nvram_header *)(iobase + off - size);
- goto found;
- }
- off <<= 1;
- }
-
- /* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
- header = (struct nvram_header *)(iobase + 4096);
- if (header->magic == NVRAM_MAGIC) {
- size = NVRAM_SPACE;
- goto found;
- }
-
- header = (struct nvram_header *)(iobase + 1024);
- if (header->magic == NVRAM_MAGIC) {
- size = NVRAM_SPACE;
- goto found;
- }
-
- pr_err("no nvram found\n");
- return -ENXIO;
-
-found:
- src = (u32 *)header;
- dst = (u32 *)nvram_buf;
- for (i = 0; i < sizeof(struct nvram_header); i += 4)
- *dst++ = __raw_readl(src++);
- header = (struct nvram_header *)nvram_buf;
- nvram_len = header->len;
- if (nvram_len > size) {
- pr_err("The nvram size according to the header seems to be bigger than the partition on flash\n");
- nvram_len = size;
- }
- if (nvram_len >= NVRAM_SPACE) {
- pr_err("nvram on flash (%i bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
- header->len, NVRAM_SPACE - 1);
- nvram_len = NVRAM_SPACE - 1;
- }
- /* proceed reading data after header */
- for (; i < nvram_len; i += 4)
- *dst++ = readl(src++);
- nvram_buf[NVRAM_SPACE - 1] = '\0';
-
- return 0;
-}
-
-/*
- * On bcm47xx we need access to the NVRAM very early, so we can't use mtd
- * subsystem to access flash. We can't even use platform device / driver to
- * store memory offset.
- * To handle this we provide following symbol. It's supposed to be called as
- * soon as we get info about flash device, before any NVRAM entry is needed.
- */
-int bcm47xx_nvram_init_from_mem(u32 base, u32 lim)
-{
- void __iomem *iobase;
- int err;
-
- iobase = ioremap_nocache(base, lim);
- if (!iobase)
- return -ENOMEM;
-
- err = nvram_find_and_copy(iobase, lim);
-
- iounmap(iobase);
-
- return err;
-}
-
-static int nvram_init(void)
-{
-#ifdef CONFIG_MTD
- struct mtd_info *mtd;
- struct nvram_header header;
- size_t bytes_read;
- int err;
-
- mtd = get_mtd_device_nm("nvram");
- if (IS_ERR(mtd))
- return -ENODEV;
-
- err = mtd_read(mtd, 0, sizeof(header), &bytes_read, (uint8_t *)&header);
- if (!err && header.magic == NVRAM_MAGIC &&
- header.len > sizeof(header)) {
- nvram_len = header.len;
- if (nvram_len >= NVRAM_SPACE) {
- pr_err("nvram on flash (%i bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
- header.len, NVRAM_SPACE);
- nvram_len = NVRAM_SPACE - 1;
- }
-
- err = mtd_read(mtd, 0, nvram_len, &nvram_len,
- (u8 *)nvram_buf);
- return err;
- }
-#endif
-
- return -ENXIO;
-}
-
-int bcm47xx_nvram_getenv(const char *name, char *val, size_t val_len)
-{
- char *var, *value, *end, *eq;
- int err;
-
- if (!name)
- return -EINVAL;
-
- if (!nvram_len) {
- err = nvram_init();
- if (err)
- return err;
- }
-
- /* Look for name=value and return value */
- var = &nvram_buf[sizeof(struct nvram_header)];
- end = nvram_buf + sizeof(nvram_buf);
- while (var < end && *var) {
- eq = strchr(var, '=');
- if (!eq)
- break;
- value = eq + 1;
- if (eq - var == strlen(name) &&
- strncmp(var, name, eq - var) == 0)
- return snprintf(val, val_len, "%s", value);
- var = value + strlen(value) + 1;
- }
- return -ENOENT;
-}
-EXPORT_SYMBOL(bcm47xx_nvram_getenv);
-
-int bcm47xx_nvram_gpio_pin(const char *name)
-{
- int i, err;
- char nvram_var[] = "gpioXX";
- char buf[NVRAM_MAX_GPIO_VALUE_LEN];
-
- /* TODO: Optimize it to don't call getenv so many times */
- for (i = 0; i < NVRAM_MAX_GPIO_ENTRIES; i++) {
- err = snprintf(nvram_var, sizeof(nvram_var), "gpio%i", i);
- if (err <= 0)
- continue;
- err = bcm47xx_nvram_getenv(nvram_var, buf, sizeof(buf));
- if (err <= 0)
- continue;
- if (!strcmp(name, buf))
- return i;
- }
- return -ENOENT;
-}
-EXPORT_SYMBOL(bcm47xx_nvram_gpio_pin);
-
-char *bcm47xx_nvram_get_contents(size_t *nvram_size)
-{
- int err;
- char *nvram;
-
- if (!nvram_len) {
- err = nvram_init();
- if (err)
- return NULL;
- }
-
- *nvram_size = nvram_len - sizeof(struct nvram_header);
- nvram = vmalloc(*nvram_size);
- if (!nvram)
- return NULL;
- memcpy(nvram, &nvram_buf[sizeof(struct nvram_header)], *nvram_size);
-
- return nvram;
-}
-EXPORT_SYMBOL(bcm47xx_nvram_get_contents);