MIPS: mscc: ocelot: disable all switch ports by default

The ocelot switch driver used to ignore ports which do not have a
phy-handle property and not probe those, but this is not quite ok since
it is valid to not have a phy-handle property if there is a fixed-link.

It seems that checking for a phy-handle was a proxy for the proper check
which is for the status, but that doesn't make a lot of sense, since the
ocelot driver already iterates using for_each_available_child_of_node
which skips the disabled ports, so I have no idea.

Anyway, a widespread pattern in device trees is for a SoC dtsi to
disable by default all hardware, and let board dts files enable what is
used. So let's do that and enable only the ports with a phy-handle in
the pcb120 and pcb123 device tree files.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

3 files changed, 23 insertions, 0 deletions

diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi
index 535a98284dcb..e51db651af13 100644
--- a/arch/mips/boot/dts/mscc/ocelot.dtsi
+++ b/arch/mips/boot/dts/mscc/ocelot.dtsi
@@ -150,36 +150,47 @@
 
 				port0: port@0 {
 					reg = <0>;
+					status = "disabled";
 				};
 				port1: port@1 {
 					reg = <1>;
+					status = "disabled";
 				};
 				port2: port@2 {
 					reg = <2>;
+					status = "disabled";
 				};
 				port3: port@3 {
 					reg = <3>;
+					status = "disabled";
 				};
 				port4: port@4 {
 					reg = <4>;
+					status = "disabled";
 				};
 				port5: port@5 {
 					reg = <5>;
+					status = "disabled";
 				};
 				port6: port@6 {
 					reg = <6>;
+					status = "disabled";
 				};
 				port7: port@7 {
 					reg = <7>;
+					status = "disabled";
 				};
 				port8: port@8 {
 					reg = <8>;
+					status = "disabled";
 				};
 				port9: port@9 {
 					reg = <9>;
+					status = "disabled";
 				};
 				port10: port@10 {
 					reg = <10>;
+					status = "disabled";
 				};
 			};
 		};
diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb120.dts b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
index 897de5025d7f..d2dc6b3d923c 100644
--- a/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
+++ b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
@@ -69,40 +69,48 @@
 };
 
 &port0 {
+	status = "okay";
 	phy-handle = <&phy0>;
 };
 
 &port1 {
+	status = "okay";
 	phy-handle = <&phy1>;
 };
 
 &port2 {
+	status = "okay";
 	phy-handle = <&phy2>;
 };
 
 &port3 {
+	status = "okay";
 	phy-handle = <&phy3>;
 };
 
 &port4 {
+	status = "okay";
 	phy-handle = <&phy7>;
 	phy-mode = "sgmii";
 	phys = <&serdes 4 SERDES1G(2)>;
 };
 
 &port5 {
+	status = "okay";
 	phy-handle = <&phy4>;
 	phy-mode = "sgmii";
 	phys = <&serdes 5 SERDES1G(5)>;
 };
 
 &port6 {
+	status = "okay";
 	phy-handle = <&phy6>;
 	phy-mode = "sgmii";
 	phys = <&serdes 6 SERDES1G(3)>;
 };
 
 &port9 {
+	status = "okay";
 	phy-handle = <&phy5>;
 	phy-mode = "sgmii";
 	phys = <&serdes 9 SERDES1G(4)>;
diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
index ef852f382da8..7d7e638791dd 100644
--- a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
+++ b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
@@ -47,17 +47,21 @@
 };
 
 &port0 {
+	status = "okay";
 	phy-handle = <&phy0>;
 };
 
 &port1 {
+	status = "okay";
 	phy-handle = <&phy1>;
 };
 
 &port2 {
+	status = "okay";
 	phy-handle = <&phy2>;
 };
 
 &port3 {
+	status = "okay";
 	phy-handle = <&phy3>;
 };