Merge git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300

* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300: (44 commits)
  MN10300: Save frame pointer in thread_info struct rather than global var
  MN10300: Change "Matsushita" to "Panasonic".
  MN10300: Create a defconfig for the ASB2364 board
  MN10300: Update the ASB2303 defconfig
  MN10300: ASB2364: Add support for SMSC911X and SMC911X
  MN10300: ASB2364: Handle the IRQ multiplexer in the FPGA
  MN10300: Generic time support
  MN10300: Specify an ELF HWCAP flag for MN10300 Atomic Operations Unit support
  MN10300: Map userspace atomic op regs as a vmalloc page
  MN10300: And Panasonic AM34 subarch and implement SMP
  MN10300: Delete idle_timestamp from irq_cpustat_t
  MN10300: Make various interrupt priority settings configurable
  MN10300: Optimise do_csum()
  MN10300: Implement atomic ops using atomic ops unit
  MN10300: Make the FPU operate in non-lazy mode under SMP
  MN10300: SMP TLB flushing
  MN10300: Use the [ID]PTEL2 registers rather than [ID]PTEL for TLB control
  MN10300: Make the use of PIDR to mark TLB entries controllable
  MN10300: Rename __flush_tlb*() to local_flush_tlb*()
  MN10300: AM34 erratum requires MMUCTR read and write on exception entry
  ...

1 files changed, 1 insertions, 86 deletions

diff --git a/arch/mn10300/include/asm/dmactl-regs.h b/arch/mn10300/include/asm/dmactl-regs.h
index 58a199da0f4a..80337b339c90 100644
--- a/arch/mn10300/include/asm/dmactl-regs.h
+++ b/arch/mn10300/include/asm/dmactl-regs.h
@@ -11,91 +11,6 @@
 #ifndef _ASM_DMACTL_REGS_H
 #define _ASM_DMACTL_REGS_H
 
-#include <asm/cpu-regs.h>
-
-#ifdef __KERNEL__
-
-/* DMA registers */
-#define	DMxCTR(N)		__SYSREG(0xd2000000 + ((N) * 0x100), u32)	/* control reg */
-#define	DMxCTR_BG		0x0000001f	/* transfer request source */
-#define	DMxCTR_BG_SOFT		0x00000000	/* - software source */
-#define	DMxCTR_BG_SC0TX		0x00000002	/* - serial port 0 transmission */
-#define	DMxCTR_BG_SC0RX		0x00000003	/* - serial port 0 reception */
-#define	DMxCTR_BG_SC1TX		0x00000004	/* - serial port 1 transmission */
-#define	DMxCTR_BG_SC1RX		0x00000005	/* - serial port 1 reception */
-#define	DMxCTR_BG_SC2TX		0x00000006	/* - serial port 2 transmission */
-#define	DMxCTR_BG_SC2RX		0x00000007	/* - serial port 2 reception */
-#define	DMxCTR_BG_TM0UFLOW	0x00000008	/* - timer 0 underflow */
-#define	DMxCTR_BG_TM1UFLOW	0x00000009	/* - timer 1 underflow */
-#define	DMxCTR_BG_TM2UFLOW	0x0000000a	/* - timer 2 underflow */
-#define	DMxCTR_BG_TM3UFLOW	0x0000000b	/* - timer 3 underflow */
-#define	DMxCTR_BG_TM6ACMPCAP	0x0000000c	/* - timer 6A compare/capture */
-#define	DMxCTR_BG_AFE		0x0000000d	/* - analogue front-end interrupt source */
-#define	DMxCTR_BG_ADC		0x0000000e	/* - A/D conversion end interrupt source */
-#define	DMxCTR_BG_IRDA		0x0000000f	/* - IrDA interrupt source */
-#define	DMxCTR_BG_RTC		0x00000010	/* - RTC interrupt source */
-#define	DMxCTR_BG_XIRQ0		0x00000011	/* - XIRQ0 pin interrupt source */
-#define	DMxCTR_BG_XIRQ1		0x00000012	/* - XIRQ1 pin interrupt source */
-#define	DMxCTR_BG_XDMR0		0x00000013	/* - external request 0 source (XDMR0 pin) */
-#define	DMxCTR_BG_XDMR1		0x00000014	/* - external request 1 source (XDMR1 pin) */
-#define	DMxCTR_SAM		0x000000e0	/* DMA transfer src addr mode */
-#define	DMxCTR_SAM_INCR		0x00000000	/* - increment */
-#define	DMxCTR_SAM_DECR		0x00000020	/* - decrement */
-#define	DMxCTR_SAM_FIXED	0x00000040	/* - fixed */
-#define	DMxCTR_DAM		0x00000000	/* DMA transfer dest addr mode */
-#define	DMxCTR_DAM_INCR		0x00000000	/* - increment */
-#define	DMxCTR_DAM_DECR		0x00000100	/* - decrement */
-#define	DMxCTR_DAM_FIXED	0x00000200	/* - fixed */
-#define	DMxCTR_TM		0x00001800	/* DMA transfer mode */
-#define	DMxCTR_TM_BATCH		0x00000000	/* - batch transfer */
-#define	DMxCTR_TM_INTERM	0x00001000	/* - intermittent transfer */
-#define	DMxCTR_UT		0x00006000	/* DMA transfer unit */
-#define	DMxCTR_UT_1		0x00000000	/* - 1 byte */
-#define	DMxCTR_UT_2		0x00002000	/* - 2 byte */
-#define	DMxCTR_UT_4		0x00004000	/* - 4 byte */
-#define	DMxCTR_UT_16		0x00006000	/* - 16 byte */
-#define	DMxCTR_TEN		0x00010000	/* DMA channel transfer enable */
-#define	DMxCTR_RQM		0x00060000	/* external request input source mode */
-#define	DMxCTR_RQM_FALLEDGE	0x00000000	/* - falling edge */
-#define	DMxCTR_RQM_RISEEDGE	0x00020000	/* - rising edge */
-#define	DMxCTR_RQM_LOLEVEL	0x00040000	/* - low level */
-#define	DMxCTR_RQM_HILEVEL	0x00060000	/* - high level */
-#define	DMxCTR_RQF		0x01000000	/* DMA transfer request flag */
-#define	DMxCTR_XEND		0x80000000	/* DMA transfer end flag */
-
-#define	DMxSRC(N)		__SYSREG(0xd2000004 + ((N) * 0x100), u32)	/* control reg */
-
-#define	DMxDST(N)		__SYSREG(0xd2000008 + ((N) * 0x100), u32)	/* src addr reg */
-
-#define	DMxSIZ(N)		__SYSREG(0xd200000c + ((N) * 0x100), u32)	/* dest addr reg */
-#define DMxSIZ_CT		0x000fffff	/* number of bytes to transfer */
-
-#define	DMxCYC(N)		__SYSREG(0xd2000010 + ((N) * 0x100), u32)	/* intermittent
-										 * size reg */
-#define DMxCYC_CYC		0x000000ff	/* number of interrmittent transfers -1 */
-
-#define DM0IRQ			16		/* DMA channel 0 complete IRQ */
-#define DM1IRQ			17		/* DMA channel 1 complete IRQ */
-#define DM2IRQ			18		/* DMA channel 2 complete IRQ */
-#define DM3IRQ			19		/* DMA channel 3 complete IRQ */
-
-#define	DM0ICR			GxICR(DM0IRQ)	/* DMA channel 0 complete intr ctrl reg */
-#define	DM1ICR			GxICR(DM0IR1)	/* DMA channel 1 complete intr ctrl reg */
-#define	DM2ICR			GxICR(DM0IR2)	/* DMA channel 2 complete intr ctrl reg */
-#define	DM3ICR			GxICR(DM0IR3)	/* DMA channel 3 complete intr ctrl reg */
-
-#ifndef __ASSEMBLY__
-
-struct mn10300_dmactl_regs {
-	u32		ctr;
-	const void	*src;
-	void		*dst;
-	u32		siz;
-	u32		cyc;
-} __attribute__((aligned(0x100)));
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
+#include <proc/dmactl-regs.h>
 
 #endif /* _ASM_DMACTL_REGS_H */