Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	Documentation/powerpc/booting-without-of.txt
	drivers/atm/Makefile
	drivers/net/fs_enet/fs_enet-main.c
	drivers/pci/pci-acpi.c
	net/8021q/vlan.c
	net/iucv/iucv.c

78 files changed, 6810 insertions, 1604 deletions

diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 095e04db1c0e..19f83c8f219d 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -35,6 +35,8 @@ endif
 
 BOOTCFLAGS	+= -I$(obj) -I$(srctree)/$(obj) -I$(srctree)/$(src)/libfdt
 
+DTS_FLAGS	?= -p 1024
+
 $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
 $(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
@@ -63,10 +65,10 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c
 		ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
 		cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \
 		cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
-		fixed-head.S ep88xc.c ep405.c \
+		fixed-head.S ep88xc.c ep405.c cuboot-c2k.c \
 		cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
 		cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
-		virtex405-head.S
+		virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c
 src-boot := $(src-wlib) $(src-plat) empty.c
 
 src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -213,6 +215,7 @@ image-$(CONFIG_WALNUT)			+= treeImage.walnut
 # Board ports in arch/powerpc/platform/44x/Kconfig
 image-$(CONFIG_EBONY)			+= treeImage.ebony cuImage.ebony
 image-$(CONFIG_BAMBOO)			+= treeImage.bamboo cuImage.bamboo
+image-$(CONFIG_SAM440EP)		+= cuImage.sam440ep
 image-$(CONFIG_SEQUOIA)			+= cuImage.sequoia
 image-$(CONFIG_RAINIER)			+= cuImage.rainier
 image-$(CONFIG_TAISHAN)			+= cuImage.taishan
@@ -242,6 +245,7 @@ image-$(CONFIG_MPC834x_ITX)		+= cuImage.mpc8349emitx \
 					   cuImage.mpc8349emitxgp
 image-$(CONFIG_MPC834x_MDS)		+= cuImage.mpc834x_mds
 image-$(CONFIG_MPC836x_MDS)		+= cuImage.mpc836x_mds
+image-$(CONFIG_ASP834x)			+= dtbImage.asp834x-redboot
 
 # Board ports in arch/powerpc/platform/85xx/Kconfig
 image-$(CONFIG_MPC8540_ADS)		+= cuImage.mpc8540ads
@@ -254,6 +258,7 @@ image-$(CONFIG_MPC85xx_DS)		+= cuImage.mpc8544ds \
 					   cuImage.mpc8572ds
 image-$(CONFIG_TQM8540)			+= cuImage.tqm8540
 image-$(CONFIG_TQM8541)			+= cuImage.tqm8541
+image-$(CONFIG_TQM8548)			+= cuImage.tqm8548
 image-$(CONFIG_TQM8555)			+= cuImage.tqm8555
 image-$(CONFIG_TQM8560)			+= cuImage.tqm8560
 image-$(CONFIG_SBC8548)			+= cuImage.sbc8548
@@ -263,6 +268,7 @@ image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
 # Board ports in arch/powerpc/platform/embedded6xx/Kconfig
 image-$(CONFIG_STORCENTER)		+= cuImage.storcenter
 image-$(CONFIG_MPC7448HPC2)		+= cuImage.mpc7448hpc2
+image-$(CONFIG_PPC_C2K)			+= cuImage.c2k
 
 # For 32-bit powermacs, build the COFF and miboot images
 # as well as the ELF images.
@@ -270,6 +276,9 @@ ifeq ($(CONFIG_PPC32),y)
 image-$(CONFIG_PPC_PMAC)	+= zImage.coff zImage.miboot
 endif
 
+# Allow extra targets to be added to the defconfig
+image-y	+= $(subst ",,$(CONFIG_EXTRA_TARGETS))
+
 initrd-  := $(patsubst zImage%, zImage.initrd%, $(image-n) $(image-))
 initrd-y := $(patsubst zImage%, zImage.initrd%, \
 		$(patsubst dtbImage%, dtbImage.initrd%, \
diff --git a/arch/powerpc/boot/addnote.c b/arch/powerpc/boot/addnote.c
index 8041a9845ab7..b1e5611b2ab1 100644
--- a/arch/powerpc/boot/addnote.c
+++ b/arch/powerpc/boot/addnote.c
@@ -25,7 +25,7 @@ char arch[] = "PowerPC";
 #define N_DESCR	6
 unsigned int descr[N_DESCR] = {
 	0xffffffff,		/* real-mode = true */
-	0x00c00000,		/* real-base, i.e. where we expect OF to be */
+	0x02000000,		/* real-base, i.e. where we expect OF to be */
 	0xffffffff,		/* real-size */
 	0xffffffff,		/* virt-base */
 	0xffffffff,		/* virt-size */
diff --git a/arch/powerpc/boot/cuboot-c2k.c b/arch/powerpc/boot/cuboot-c2k.c
new file mode 100644
index 000000000000..e43594950ba3
--- /dev/null
+++ b/arch/powerpc/boot/cuboot-c2k.c
@@ -0,0 +1,190 @@
+/*
+ * GEFanuc C2K platform code.
+ *
+ * Author: Remi Machet <rmachet@slac.stanford.edu>
+ *
+ * Originated from prpmc2800.c
+ *
+ * 2008 (c) Stanford University
+ * 2007 (c) MontaVista, Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "types.h"
+#include "stdio.h"
+#include "io.h"
+#include "ops.h"
+#include "elf.h"
+#include "gunzip_util.h"
+#include "mv64x60.h"
+#include "cuboot.h"
+#include "ppcboot.h"
+
+static u8 *bridge_base;
+
+static void c2k_bridge_setup(u32 mem_size)
+{
+	u32 i, v[30], enables, acc_bits;
+	u32 pci_base_hi, pci_base_lo, size, buf[2];
+	unsigned long cpu_base;
+	int rc;
+	void *devp, *mv64x60_devp;
+	u8 *bridge_pbase, is_coherent;
+	struct mv64x60_cpu2pci_win *tbl;
+	int bus;
+
+	bridge_pbase = mv64x60_get_bridge_pbase();
+	is_coherent = mv64x60_is_coherent();
+
+	if (is_coherent)
+		acc_bits = MV64x60_PCI_ACC_CNTL_SNOOP_WB
+			| MV64x60_PCI_ACC_CNTL_SWAP_NONE
+			| MV64x60_PCI_ACC_CNTL_MBURST_32_BYTES
+			| MV64x60_PCI_ACC_CNTL_RDSIZE_32_BYTES;
+	else
+		acc_bits = MV64x60_PCI_ACC_CNTL_SNOOP_NONE
+			| MV64x60_PCI_ACC_CNTL_SWAP_NONE
+			| MV64x60_PCI_ACC_CNTL_MBURST_128_BYTES
+			| MV64x60_PCI_ACC_CNTL_RDSIZE_256_BYTES;
+
+	mv64x60_config_ctlr_windows(bridge_base, bridge_pbase, is_coherent);
+	mv64x60_devp = find_node_by_compatible(NULL, "marvell,mv64360");
+	if (mv64x60_devp == NULL)
+		fatal("Error: Missing marvell,mv64360 device tree node\n\r");
+
+	enables = in_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE));
+	enables |= 0x007ffe00; /* Disable all cpu->pci windows */
+	out_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE), enables);
+
+	/* Get the cpu -> pci i/o & mem mappings from the device tree */
+	devp = NULL;
+	for (bus = 0; ; bus++) {
+		char name[] = "pci ";
+
+		name[strlen(name)-1] = bus+'0';
+
+		devp = find_node_by_alias(name);
+		if (devp == NULL)
+			break;
+
+		if (bus >= 2)
+			fatal("Error: Only 2 PCI controllers are supported at" \
+				" this time.\n");
+
+		mv64x60_config_pci_windows(bridge_base, bridge_pbase, bus, 0,
+				mem_size, acc_bits);
+
+		rc = getprop(devp, "ranges", v, sizeof(v));
+		if (rc == 0)
+			fatal("Error: Can't find marvell,mv64360-pci ranges"
+				" property\n\r");
+
+		/* Get the cpu -> pci i/o & mem mappings from the device tree */
+
+		for (i = 0; i < rc; i += 6) {
+			switch (v[i] & 0xff000000) {
+			case 0x01000000: /* PCI I/O Space */
+				tbl = mv64x60_cpu2pci_io;
+				break;
+			case 0x02000000: /* PCI MEM Space */
+				tbl = mv64x60_cpu2pci_mem;
+				break;
+			default:
+				continue;
+			}
+
+			pci_base_hi = v[i+1];
+			pci_base_lo = v[i+2];
+			cpu_base = v[i+3];
+			size = v[i+5];
+
+			buf[0] = cpu_base;
+			buf[1] = size;
+
+			if (!dt_xlate_addr(devp, buf, sizeof(buf), &cpu_base))
+				fatal("Error: Can't translate PCI address " \
+						"0x%x\n\r", (u32)cpu_base);
+
+			mv64x60_config_cpu2pci_window(bridge_base, bus,
+				pci_base_hi, pci_base_lo, cpu_base, size, tbl);
+		}
+
+		enables &= ~(3<<(9+bus*5)); /* Enable cpu->pci<bus> i/o,
+						cpu->pci<bus> mem0 */
+		out_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE),
+			enables);
+	};
+}
+
+static void c2k_fixups(void)
+{
+	u32 mem_size;
+
+	mem_size = mv64x60_get_mem_size(bridge_base);
+	c2k_bridge_setup(mem_size); /* Do necessary bridge setup */
+}
+
+#define MV64x60_MPP_CNTL_0	0xf000
+#define MV64x60_MPP_CNTL_2	0xf008
+#define MV64x60_GPP_IO_CNTL	0xf100
+#define MV64x60_GPP_LEVEL_CNTL	0xf110
+#define MV64x60_GPP_VALUE_SET	0xf118
+
+static void c2k_reset(void)
+{
+	u32 temp;
+
+	udelay(5000000);
+
+	if (bridge_base != 0) {
+		temp = in_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_0));
+		temp &= 0xFFFF0FFF;
+		out_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_0), temp);
+
+		temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL));
+		temp |= 0x00000004;
+		out_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL), temp);
+
+		temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL));
+		temp |= 0x00000004;
+		out_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL), temp);
+
+		temp = in_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_2));
+		temp &= 0xFFFF0FFF;
+		out_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_2), temp);
+
+		temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL));
+		temp |= 0x00080000;
+		out_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL), temp);
+
+		temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL));
+		temp |= 0x00080000;
+		out_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL), temp);
+
+		out_le32((u32 *)(bridge_base + MV64x60_GPP_VALUE_SET),
+				0x00080004);
+	}
+
+	for (;;);
+}
+
+static bd_t bd;
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+			unsigned long r6, unsigned long r7)
+{
+	CUBOOT_INIT();
+
+	fdt_init(_dtb_start);
+
+	bridge_base = mv64x60_get_bridge_base();
+
+	platform_ops.fixups = c2k_fixups;
+	platform_ops.exit = c2k_reset;
+
+	if (serial_console_init() < 0)
+		exit();
+}
diff --git a/arch/powerpc/boot/cuboot-sam440ep.c b/arch/powerpc/boot/cuboot-sam440ep.c
new file mode 100644
index 000000000000..ec10a47460dd
--- /dev/null
+++ b/arch/powerpc/boot/cuboot-sam440ep.c
@@ -0,0 +1,49 @@
+/*
+ * Old U-boot compatibility for Sam440ep based off bamboo.c code
+ * original copyrights below
+ *
+ * Author: Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * Copyright 2007 IBM Corporation
+ *
+ * Based on cuboot-ebony.c
+ *
+ * Modified from cuboot-bamboo.c for sam440ep:
+ * Copyright 2008 Giuseppe Coviello <gicoviello@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "44x.h"
+#include "4xx.h"
+#include "cuboot.h"
+
+#define TARGET_4xx
+#define TARGET_44x
+#include "ppcboot.h"
+
+static bd_t bd;
+
+static void sam440ep_fixups(void)
+{
+       unsigned long sysclk = 66666666;
+
+       ibm440ep_fixup_clocks(sysclk, 11059200, 25000000);
+       ibm4xx_sdram_fixup_memsize();
+       ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00);
+       dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr);
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		unsigned long r6, unsigned long r7)
+{
+	CUBOOT_INIT();
+	platform_ops.fixups = sam440ep_fixups;
+	platform_ops.exit = ibm44x_dbcr_reset;
+	fdt_init(_dtb_start);
+	serial_console_init();
+}
diff --git a/arch/powerpc/boot/cuboot-warp.c b/arch/powerpc/boot/cuboot-warp.c
index eb108a877492..21780210057d 100644
--- a/arch/powerpc/boot/cuboot-warp.c
+++ b/arch/powerpc/boot/cuboot-warp.c
@@ -10,6 +10,7 @@
 #include "ops.h"
 #include "4xx.h"
 #include "cuboot.h"
+#include "stdio.h"
 
 #define TARGET_4xx
 #define TARGET_44x
@@ -17,14 +18,54 @@
 
 static bd_t bd;
 
-static void warp_fixups(void)
+static void warp_fixup_one_nor(u32 from, u32 to)
 {
-	unsigned long sysclk = 66000000;
+	void *devp;
+	char name[50];
+	u32 v[2];
+
+	sprintf(name, "/plb/opb/ebc/nor_flash@0,0/partition@%x", from);
+
+	devp = finddevice(name);
+	if (!devp)
+		return;
+
+	if (getprop(devp, "reg", v, sizeof(v)) == sizeof(v)) {
+		v[0] = to;
+		setprop(devp, "reg", v, sizeof(v));
+
+		printf("NOR 64M fixup %x -> %x\r\n", from, to);
+	}
+}
+
 
-	ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
+static void warp_fixups(void)
+{
+	ibm440ep_fixup_clocks(66000000, 11059200, 50000000);
 	ibm4xx_sdram_fixup_memsize();
 	ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
 	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+
+	/* Fixup for 64M flash on Rev A boards. */
+	if (bd.bi_flashsize == 0x4000000) {
+		void *devp;
+		u32 v[3];
+
+		devp = finddevice("/plb/opb/ebc/nor_flash@0,0");
+		if (!devp)
+			return;
+
+		/* Fixup the size */
+		if (getprop(devp, "reg", v, sizeof(v)) == sizeof(v)) {
+			v[2] = bd.bi_flashsize;
+			setprop(devp, "reg", v, sizeof(v));
+		}
+
+		/* Fixup parition offsets */
+		warp_fixup_one_nor(0x300000, 0x3f00000);
+		warp_fixup_one_nor(0x340000, 0x3f40000);
+		warp_fixup_one_nor(0x380000, 0x3f80000);
+	}
 }
 
 
diff --git a/arch/powerpc/boot/dts/asp834x-redboot.dts b/arch/powerpc/boot/dts/asp834x-redboot.dts
new file mode 100644
index 000000000000..8b1bb0e41905
--- /dev/null
+++ b/arch/powerpc/boot/dts/asp834x-redboot.dts
@@ -0,0 +1,282 @@
+/*
+ * Analogue & Micro ASP8347 Device Tree Source
+ *
+ * Copyright 2008 Codehermit
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "Analogue & Micro ASP8347E";
+	compatible = "analogue-and-micro,asp8347e";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8347@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;	// 128MB at 0
+	};
+
+	localbus@ff005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8347e-localbus",
+			     "fsl,pq2pro-localbus",
+			     "simple-bus";
+		reg = <0xff005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+
+		ranges = <
+			0 0 0xf0000000 0x02000000
+		>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+	};
+
+	soc8349@ff000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xff000000 0x00100000>;
+		reg = <0xff000000 0x00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <16 0x8>;
+			interrupt-parent = <&ipic>;
+			mode = "cpu";
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8347-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		/* phy type (ULPI or SERIAL) are only types supported for MPH */
+		/* port = 0 or 1 */
+		usb@22000 {
+			compatible = "fsl-usb2-mph";
+			reg = <0x22000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <39 0x8>;
+			phy_type = "ulpi";
+			port1;
+		};
+		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			dr_mode = "otg";
+			phy_type = "ulpi";
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <0x24520 0x20>;
+
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&ipic>;
+				interrupts = <17 0x8>;
+				reg = <0x1>;
+				device_type = "ethernet-phy";
+			};
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&ipic>;
+				interrupts = <18 0x8>;
+				reg = <0x2>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		enet0: ethernet@24000 {
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 08 e5 11 32 33 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			interrupt-parent = <&ipic>;
+			phy-handle = <&phy0>;
+			linux,network-index = <0>;
+		};
+
+		enet1: ethernet@25000 {
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			local-mac-address = [ 00 08 e5 11 32 34 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			interrupt-parent = <&ipic>;
+			phy-handle = <&phy1>;
+			linux,network-index = <1>;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <400000000>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <400000000>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		/* May need to remove if on a part without crypto engine */
+		crypto@30000 {
+			device_type = "crypto";
+			model = "SEC2";
+			compatible = "talitos";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			num-channels = <4>;
+			channel-fifo-len = <24>;
+			exec-units-mask = <0x0000007e>;
+			/* desc mask is for rev2.0,
+			 * we need runtime fixup for >2.0 */
+			descriptor-types-mask = <0x01010ebf>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: pic@700 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+			device_type = "ipic";
+		};
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,38400 root=/dev/mtdblock3 rootfstype=jffs2";
+		linux,stdout-path = &serial0;
+	};
+
+};
diff --git a/arch/powerpc/boot/dts/bamboo.dts b/arch/powerpc/boot/dts/bamboo.dts
index ba2521bdaab1..6ce0cc2c0208 100644
--- a/arch/powerpc/boot/dts/bamboo.dts
+++ b/arch/powerpc/boot/dts/bamboo.dts
@@ -11,12 +11,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,bamboo";
 	compatible = "amcc,bamboo";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -34,13 +36,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440EP";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by zImage */
 			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -48,14 +50,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by zImage */
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-440ep","ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -65,22 +67,22 @@
 		compatible = "ibm,uic-440ep","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	SDR0: sdr {
 		compatible = "ibm,sdr-440ep";
-		dcr-reg = <00e 002>;
+		dcr-reg = <0x00e 0x002>;
 	};
 
 	CPR0: cpr {
 		compatible = "ibm,cpr-440ep";
-		dcr-reg = <00c 002>;
+		dcr-reg = <0x00c 0x002>;
 	};
 
 	plb {
@@ -92,29 +94,29 @@
 
 		SDRAM0: sdram {
 			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		DMA0: dma {
 			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
-			dcr-reg = <100 027>;
+			dcr-reg = <0x100 0x027>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <4>;
 			num-rx-chans = <2>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					/*RXEOB*/ 1 &UIC0 b 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
 		};
 
 		POB0: opb {
@@ -124,101 +126,101 @@
 			/* Bamboo is oddball in the 44x world and doesn't use the ERPN
 			 * bits.
 			 */
-		  	ranges = <00000000 0 00000000 80000000
-			          80000000 0 80000000 80000000>;
+		  	ranges = <0x00000000 0x00000000 0x00000000 0x80000000
+			          0x80000000 0x00000000 0x80000000 0x80000000>;
 		  	interrupt-parent = <&UIC1>;
-		  	interrupts = <7 4>;
+		  	interrupts = <0x7 0x4>;
 		  	clock-frequency = <0>; /* Filled in by zImage */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 			};
 
 			UART0: serial@ef600300 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600300 8>;
-		   		virtual-reg = <ef600300>;
+		   		reg = <0xef600300 0x00000008>;
+		   		virtual-reg = <0xef600300>;
 		   		clock-frequency = <0>; /* Filled in by zImage */
-		   		current-speed = <1c200>;
+		   		current-speed = <115200>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <0 4>;
+		   		interrupts = <0x0 0x4>;
 	   		};
 
 			UART1: serial@ef600400 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600400 8>;
-		   		virtual-reg = <ef600400>;
+		   		reg = <0xef600400 0x00000008>;
+		   		virtual-reg = <0xef600400>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <1 4>;
+		   		interrupts = <0x1 0x4>;
 	   		};
 
 			UART2: serial@ef600500 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600500 8>;
-		   		virtual-reg = <ef600500>;
+		   		reg = <0xef600500 0x00000008>;
+		   		virtual-reg = <0xef600500>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <3 4>;
+		   		interrupts = <0x3 0x4>;
 	   		};
 
 			UART3: serial@ef600600 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600600 8>;
-		   		virtual-reg = <ef600600>;
+		   		reg = <0xef600600 0x00000008>;
+		   		virtual-reg = <0xef600600>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <4 4>;
+		   		interrupts = <0x4 0x4>;
 	   		};
 
 			IIC0: i2c@ef600700 {
 				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
-				reg = <ef600700 14>;
+				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600800 {
 				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
-				reg = <ef600800 14>;
+				reg = <0xef600800 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <7 4>;
+				interrupts = <0x7 0x4>;
 			};
 
 			ZMII0: emac-zmii@ef600d00 {
 				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
-				reg = <ef600d00 c>;
+				reg = <0xef600d00 0x0000000c>;
 			};
 
 			EMAC0: ethernet@ef600e00 {
 				device_type = "network";
 				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1c 4 1d 4>;
-				reg = <ef600e00 70>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0xef600e00 0x00000070>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0 1>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <0>;
 			};
@@ -227,26 +229,26 @@
 				device_type = "network";
 				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1e 4 1f 4>;
-				reg = <ef600f00 70>;
+				interrupts = <0x1e 0x4 0x1f 0x4>;
+				reg = <0xef600f00 0x00000070>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <2 3>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <1>;
 			};
 
 			usb@ef601000 {
 				compatible = "ohci-be";
-				reg = <ef601000 80>;
-				interrupts = <8 1 9 1>;
+				reg = <0xef601000 0x00000080>;
+				interrupts = <0x8 0x1 0x9 0x1>;
 				interrupt-parent = < &UIC1 >;
 			};
 		};
@@ -258,35 +260,35 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
 			primary;
-			reg = <0 eec00000 8	/* Config space access */
-			       0 eed00000 4	/* IACK */
-			       0 eed00000 4	/* Special cycle */
-			       0 ef400000 40>;	/* Internal registers */
+			reg = <0x00000000 0xeec00000 0x00000008	/* Config space access */
+			       0x00000000 0xeed00000 0x00000004	/* IACK */
+			       0x00000000 0xeed00000 0x00000004	/* Special cycle */
+			       0x00000000 0xef400000 0x00000040>;	/* Internal registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed. Chip supports a second
 			 * IO range but we don't use it for now
 			 */
-			ranges = <02000000 0 a0000000 0 a0000000 0 20000000
-				  01000000 0 00000000 0 e8000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x20000000
+				  0x01000000 0x00000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* Bamboo has all 4 IRQ pins tied together per slot */
-			interrupt-map-mask = <f800 0 0 0>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
 			interrupt-map = <
 				/* IDSEL 1 */
-				0800 0 0 0 &UIC0 1c 8
+				0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
 
 				/* IDSEL 2 */
-				1000 0 0 0 &UIC0 1b 8
+				0x1000 0x0 0x0 0x0 &UIC0 0x1b 0x8
 
 				/* IDSEL 3 */
-				1800 0 0 0 &UIC0 1a 8
+				0x1800 0x0 0x0 0x0 &UIC0 0x1a 0x8
 
 				/* IDSEL 4 */
-				2000 0 0 0 &UIC0 19 8
+				0x2000 0x0 0x0 0x0 &UIC0 0x19 0x8
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/c2k.dts b/arch/powerpc/boot/dts/c2k.dts
new file mode 100644
index 000000000000..f5d625fa3e52
--- /dev/null
+++ b/arch/powerpc/boot/dts/c2k.dts
@@ -0,0 +1,371 @@
+/* Device Tree Source for GEFanuc C2K
+ *
+ * Author: Remi Machet <rmachet@slac.stanford.edu>
+ *
+ * Originated from prpmc2800.dts
+ *
+ * 2008 (c) Stanford University
+ * 2007 (c) MontaVista, Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "C2K";
+	compatible = "GEFanuc,C2K";
+	coherency-off;
+
+	aliases {
+		pci0 = &PCI0;
+		pci1 = &PCI1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "PowerPC,7447";
+			reg = <0>;
+			clock-frequency = <996000000>;	/* 996 MHz */
+			bus-frequency = <166666667>;	/* 166.6666 MHz */
+			timebase-frequency = <41666667>;	/* 166.6666/4 MHz */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;	/* 1GB */
+	};
+
+	system-controller@d8000000 { /* Marvell Discovery */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		model = "mv64460";
+		compatible = "marvell,mv64360";
+		clock-frequency = <166666667>;		/* 166.66... MHz */
+		reg = <0xd8000000 0x00010000>;
+		virtual-reg = <0xd8000000>;
+		ranges = <0xd4000000 0xd4000000 0x01000000	/* PCI 0 I/O Space */
+			  0x80000000 0x80000000 0x08000000	/* PCI 0 MEM Space */
+			  0xd0000000 0xd0000000 0x01000000	/* PCI 1 I/O Space */
+			  0xa0000000 0xa0000000 0x08000000	/* PCI 1 MEM Space */
+			  0xd8100000 0xd8100000 0x00010000	/* FPGA */
+			  0xd8110000 0xd8110000 0x00010000	/* FPGA USARTs */
+			  0xf8000000 0xf8000000 0x08000000	/* User FLASH */
+			  0x00000000 0xd8000000 0x00010000	/* Bridge's regs */
+			  0xd8140000 0xd8140000 0x00040000>;	/* Integrated SRAM */
+
+		mdio@2000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "marvell,mv64360-mdio";
+			reg = <0x2000 4>;
+			PHY0: ethernet-phy@0 {
+				device_type = "ethernet-phy";
+				interrupts = <76>;	/* GPP 12 */
+				interrupt-parent = <&PIC>;
+				reg = <0>;
+			};
+			PHY1: ethernet-phy@1 {
+				device_type = "ethernet-phy";
+				interrupts = <76>;	/* GPP 12 */
+				interrupt-parent = <&PIC>;
+				reg = <1>;
+			};
+			PHY2: ethernet-phy@2 {
+				device_type = "ethernet-phy";
+				interrupts = <76>;	/* GPP 12 */
+				interrupt-parent = <&PIC>;
+				reg = <2>;
+			};
+		};
+
+		ethernet-group@2000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "marvell,mv64360-eth-group";
+			reg = <0x2000 0x2000>;
+			ethernet@0 {
+				device_type = "network";
+				compatible = "marvell,mv64360-eth";
+				reg = <0>;
+				interrupts = <32>;
+				interrupt-parent = <&PIC>;
+				phy = <&PHY0>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+			ethernet@1 {
+				device_type = "network";
+				compatible = "marvell,mv64360-eth";
+				reg = <1>;
+				interrupts = <33>;
+				interrupt-parent = <&PIC>;
+				phy = <&PHY1>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+			ethernet@2 {
+				device_type = "network";
+				compatible = "marvell,mv64360-eth";
+				reg = <2>;
+				interrupts = <34>;
+				interrupt-parent = <&PIC>;
+				phy = <&PHY2>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+		};
+
+		SDMA0: sdma@4000 {
+			compatible = "marvell,mv64360-sdma";
+			reg = <0x4000 0xc18>;
+			virtual-reg = <0xd8004000>;
+			interrupt-base = <0>;
+			interrupts = <36>;
+			interrupt-parent = <&PIC>;
+		};
+
+		SDMA1: sdma@6000 {
+			compatible = "marvell,mv64360-sdma";
+			reg = <0x6000 0xc18>;
+			virtual-reg = <0xd8006000>;
+			interrupt-base = <0>;
+			interrupts = <38>;
+			interrupt-parent = <&PIC>;
+		};
+
+		BRG0: brg@b200 {
+			compatible = "marvell,mv64360-brg";
+			reg = <0xb200 0x8>;
+			clock-src = <8>;
+			clock-frequency = <133333333>;
+			current-speed = <115200>;
+		};
+
+		BRG1: brg@b208 {
+			compatible = "marvell,mv64360-brg";
+			reg = <0xb208 0x8>;
+			clock-src = <8>;
+			clock-frequency = <133333333>;
+			current-speed = <115200>;
+		};
+
+		CUNIT: cunit@f200 {
+			reg = <0xf200 0x200>;
+		};
+
+		MPSCROUTING: mpscrouting@b400 {
+			reg = <0xb400 0xc>;
+		};
+
+		MPSCINTR: mpscintr@b800 {
+			reg = <0xb800 0x100>;
+			virtual-reg = <0xd800b800>;
+		};
+
+		MPSC0: mpsc@8000 {
+			device_type = "serial";
+			compatible = "marvell,mv64360-mpsc";
+			reg = <0x8000 0x38>;
+			virtual-reg = <0xd8008000>;
+			sdma = <&SDMA0>;
+			brg = <&BRG0>;
+			cunit = <&CUNIT>;
+			mpscrouting = <&MPSCROUTING>;
+			mpscintr = <&MPSCINTR>;
+			cell-index = <0>;
+			interrupts = <40>;
+			interrupt-parent = <&PIC>;
+		};
+
+		MPSC1: mpsc@9000 {
+			device_type = "serial";
+			compatible = "marvell,mv64360-mpsc";
+			reg = <0x9000 0x38>;
+			virtual-reg = <0xd8009000>;
+			sdma = <&SDMA1>;
+			brg = <&BRG1>;
+			cunit = <&CUNIT>;
+			mpscrouting = <&MPSCROUTING>;
+			mpscintr = <&MPSCINTR>;
+			cell-index = <1>;
+			interrupts = <42>;
+			interrupt-parent = <&PIC>;
+		};
+
+		wdt@b410 {			/* watchdog timer */
+			compatible = "marvell,mv64360-wdt";
+			reg = <0xb410 0x8>;
+		};
+
+		i2c@c000 {
+			compatible = "marvell,mv64360-i2c";
+			reg = <0xc000 0x20>;
+			virtual-reg = <0xd800c000>;
+			interrupts = <37>;
+			interrupt-parent = <&PIC>;
+		};
+
+		PIC: pic {
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			compatible = "marvell,mv64360-pic";
+			reg = <0x0000 0x88>;
+			interrupt-controller;
+		};
+
+		mpp@f000 {
+			compatible = "marvell,mv64360-mpp";
+			reg = <0xf000 0x10>;
+		};
+
+		gpp@f100 {
+			compatible = "marvell,mv64360-gpp";
+			reg = <0xf100 0x20>;
+		};
+
+		PCI0: pci@80000000 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			compatible = "marvell,mv64360-pci";
+			reg = <0x0cf8 0x8>;
+			ranges = <0x01000000 0x0 0x00000000 0xd4000000 0x0 0x01000000
+				  0x02000000 0x0 0x80000000 0x80000000 0x0 0x08000000>;
+			bus-range = <0 255>;
+			clock-frequency = <66000000>;
+			interrupt-pci-iack = <0x0c34>;
+			interrupt-parent = <&PIC>;
+			interrupt-map-mask = <0x0000 0x0 0x0 0x7>;
+			interrupt-map = <
+				/* Only one interrupt line for PMC0 slot (INTA) */
+				0x0000 0 0 1 &PIC 88
+			>;
+		};
+
+
+		PCI1: pci@a0000000 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			compatible = "marvell,mv64360-pci";
+			reg = <0x0c78 0x8>;
+			ranges = <0x01000000 0x0 0x00000000 0xd0000000 0x0 0x01000000
+				  0x02000000 0x0 0x80000000 0xa0000000 0x0 0x08000000>;
+			bus-range = <0 255>;
+			clock-frequency = <66000000>;
+			interrupt-pci-iack = <0x0cb4>;
+			interrupt-parent = <&PIC>;
+			interrupt-map-mask = <0xf800 0x00 0x00 0x7>;
+			interrupt-map = <
+				/* IDSEL 0x01: PMC1 ? */
+				0x0800 0 0 1 &PIC 88
+				/* IDSEL 0x02: cPCI bridge */
+				0x1000 0 0 1 &PIC 88
+				/* IDSEL 0x03: USB controller */
+				0x1800 0 0 1 &PIC 91
+				/* IDSEL 0x04: SATA controller */
+				0x2000 0 0 1 &PIC 95
+			>;
+		};
+
+		cpu-error@0070 {
+			compatible = "marvell,mv64360-cpu-error";
+			reg = <0x0070 0x10 0x0128 0x28>;
+			interrupts = <3>;
+			interrupt-parent = <&PIC>;
+		};
+
+		sram-ctrl@0380 {
+			compatible = "marvell,mv64360-sram-ctrl";
+			reg = <0x0380 0x80>;
+			interrupts = <13>;
+			interrupt-parent = <&PIC>;
+		};
+
+		pci-error@1d40 {
+			compatible = "marvell,mv64360-pci-error";
+			reg = <0x1d40 0x40 0x0c28 0x4>;
+			interrupts = <12>;
+			interrupt-parent = <&PIC>;
+		};
+
+		pci-error@1dc0 {
+			compatible = "marvell,mv64360-pci-error";
+			reg = <0x1dc0 0x40 0x0ca8 0x4>;
+			interrupts = <16>;
+			interrupt-parent = <&PIC>;
+		};
+
+		mem-ctrl@1400 {
+			compatible = "marvell,mv64360-mem-ctrl";
+			reg = <0x1400 0x60>;
+			interrupts = <17>;
+			interrupt-parent = <&PIC>;
+		};
+		/* Devices attached to the device controller */
+		devicebus@045c {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			compatible = "marvell,mv64306-devctrl";
+			reg = <0x45C 0x88>;
+			interrupts = <1>;
+			interrupt-parent = <&PIC>;
+			ranges = 	<0 0 0xd8100000 0x10000
+					 2 0 0xd8110000 0x10000
+					 4 0 0xf8000000 0x8000000>;
+			fpga@0,0 {
+				compatible = "sbs,fpga-c2k";
+				reg = <0 0 0x10000>;
+			};
+			fpga_usart@2,0 {
+				compatible = "sbs,fpga_usart-c2k";
+				reg = <2 0 0x10000>;
+			};
+			nor_flash@4,0 {
+				compatible = "cfi-flash";
+				reg = <4 0 0x8000000>; /* 128MB */
+				bank-width = <4>;
+				device-width = <1>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				partition@0 {
+					label = "boot";
+					reg = <0x00000000 0x00080000>;
+				};
+				partition@40000 {
+					label = "kernel";
+					reg = <0x00080000 0x00400000>;
+				};
+				partition@440000 {
+					label = "initrd";
+					reg = <0x00480000 0x00B80000>;
+				};
+				partition@1000000 {
+					label = "rootfs";
+					reg = <0x01000000 0x06800000>;
+				};
+				partition@7800000 {
+					label = "recovery";
+					reg = <0x07800000 0x00800000>;
+					read-only;
+				};
+			};
+		};
+	};
+	chosen {
+		linux,stdout-path = &MPSC0;
+	};
+};
diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
index 39634124929b..79fe412c11c9 100644
--- a/arch/powerpc/boot/dts/canyonlands.dts
+++ b/arch/powerpc/boot/dts/canyonlands.dts
@@ -8,12 +8,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,canyonlands";
 	compatible = "amcc,canyonlands";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -29,13 +31,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,460EX";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -43,14 +45,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by U-Boot */
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-460ex","ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -60,11 +62,11 @@
 		compatible = "ibm,uic-460ex","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -72,11 +74,11 @@
 		compatible = "ibm,uic-460ex","ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
-		dcr-reg = <0e0 009>;
+		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <a 4 b 4>; /* cascade */
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -84,22 +86,22 @@
 		compatible = "ibm,uic-460ex","ibm,uic";
 		interrupt-controller;
 		cell-index = <3>;
-		dcr-reg = <0f0 009>;
+		dcr-reg = <0x0f0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <10 4 11 4>; /* cascade */
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	SDR0: sdr {
 		compatible = "ibm,sdr-460ex";
-		dcr-reg = <00e 002>;
+		dcr-reg = <0x00e 0x002>;
 	};
 
 	CPR0: cpr {
 		compatible = "ibm,cpr-460ex";
-		dcr-reg = <00c 002>;
+		dcr-reg = <0x00c 0x002>;
 	};
 
 	plb {
@@ -111,74 +113,74 @@
 
 		SDRAM0: sdram {
 			compatible = "ibm,sdram-460ex", "ibm,sdram-405gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-460ex", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <2>;
-			num-rx-chans = <10>;
+			num-rx-chans = <16>;
 			#address-cells = <0>;
 			#size-cells = <0>;
 			interrupt-parent = <&UIC2>;
-			interrupts = <	/*TXEOB*/ 6 4
-					/*RXEOB*/ 7 4
-					/*SERR*/  3 4
-					/*TXDE*/  4 4
-					/*RXDE*/  5 4>;
+			interrupts = <	/*TXEOB*/ 0x6 0x4
+					/*RXEOB*/ 0x7 0x4
+					/*SERR*/  0x3 0x4
+					/*TXDE*/  0x4 0x4
+					/*RXDE*/  0x5 0x4>;
 		};
 
 		POB0: opb {
 			compatible = "ibm,opb-460ex", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <b0000000 4 b0000000 50000000>;
+			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-460ex", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				/* ranges property is supplied by U-Boot */
-				interrupts = <6 4>;
+				interrupts = <0x6 0x4>;
 				interrupt-parent = <&UIC1>;
 
 				nor_flash@0,0 {
 					compatible = "amd,s29gl512n", "cfi-flash";
 					bank-width = <2>;
-					reg = <0 000000 4000000>;
+					reg = <0x00000000 0x00000000 0x04000000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "kernel";
-						reg = <0 1e0000>;
+						reg = <0x00000000 0x001e0000>;
 					};
 					partition@1e0000 {
 						label = "dtb";
-						reg = <1e0000 20000>;
+						reg = <0x001e0000 0x00020000>;
 					};
 					partition@200000 {
 						label = "ramdisk";
-						reg = <200000 1400000>;
+						reg = <0x00200000 0x01400000>;
 					};
 					partition@1600000 {
 						label = "jffs2";
-						reg = <1600000 400000>;
+						reg = <0x01600000 0x00400000>;
 					};
 					partition@1a00000 {
 						label = "user";
-						reg = <1a00000 2560000>;
+						reg = <0x01a00000 0x02560000>;
 					};
 					partition@3f60000 {
 						label = "env";
-						reg = <3f60000 40000>;
+						reg = <0x03f60000 0x00040000>;
 					};
 					partition@3fa0000 {
 						label = "u-boot";
-						reg = <3fa0000 60000>;
+						reg = <0x03fa0000 0x00060000>;
 					};
 				};
 			};
@@ -186,103 +188,103 @@
 			UART0: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600300 8>;
-				virtual-reg = <ef600300>;
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			UART1: serial@ef600400 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600400 8>;
-				virtual-reg = <ef600400>;
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			UART2: serial@ef600500 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600500 8>;
-				virtual-reg = <ef600500>;
+				reg = <0xef600500 0x00000008>;
+				virtual-reg = <0xef600500>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
-				interrupts = <1d 4>;
+				interrupts = <0x1d 0x4>;
 			};
 
 			UART3: serial@ef600600 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600600 8>;
-				virtual-reg = <ef600600>;
+				reg = <0xef600600 0x00000008>;
+				virtual-reg = <0xef600600>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
-				interrupts = <1e 4>;
+				interrupts = <0x1e 0x4>;
 			};
 
 			IIC0: i2c@ef600700 {
 				compatible = "ibm,iic-460ex", "ibm,iic";
-				reg = <ef600700 14>;
+				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600800 {
 				compatible = "ibm,iic-460ex", "ibm,iic";
-				reg = <ef600800 14>;
+				reg = <0xef600800 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <3 4>;
+				interrupts = <0x3 0x4>;
 			};
 
 			ZMII0: emac-zmii@ef600d00 {
 				compatible = "ibm,zmii-460ex", "ibm,zmii";
-				reg = <ef600d00 c>;
+				reg = <0xef600d00 0x0000000c>;
 			};
 
 			RGMII0: emac-rgmii@ef601500 {
 				compatible = "ibm,rgmii-460ex", "ibm,rgmii";
-				reg = <ef601500 8>;
+				reg = <0xef601500 0x00000008>;
 				has-mdio;
 			};
 
 			TAH0: emac-tah@ef601350 {
 				compatible = "ibm,tah-460ex", "ibm,tah";
-				reg = <ef601350 30>;
+				reg = <0xef601350 0x00000030>;
 			};
 
 			TAH1: emac-tah@ef601450 {
 				compatible = "ibm,tah-460ex", "ibm,tah";
-				reg = <ef601450 30>;
+				reg = <0xef601450 0x00000030>;
 			};
 
 			EMAC0: ethernet@ef600e00 {
 				device_type = "network";
-				compatible = "ibm,emac-460ex", "ibm,emac4";
+				compatible = "ibm,emac-460ex", "ibm,emac4sync";
 				interrupt-parent = <&EMAC0>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC2 10 4
-						 /*Wake*/   1 &UIC2 14 4>;
-				reg = <ef600e00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
+				reg = <0xef600e00 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <0>;
 				tah-device = <&TAH0>;
@@ -293,25 +295,25 @@
 
 			EMAC1: ethernet@ef600f00 {
 				device_type = "network";
-				compatible = "ibm,emac-460ex", "ibm,emac4";
+				compatible = "ibm,emac-460ex", "ibm,emac4sync";
 				interrupt-parent = <&EMAC1>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC2 11 4
-						 /*Wake*/   1 &UIC2 15 4>;
-				reg = <ef600f00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+						 /*Wake*/   0x1 &UIC2 0x15 0x4>;
+				reg = <0xef600f00 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <1>;
 				mal-rx-channel = <8>;
 				cell-index = <1>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <1>;
 				tah-device = <&TAH1>;
@@ -331,27 +333,27 @@
 			primary;
 			large-inbound-windows;
 			enable-msi-hole;
-			reg = <c 0ec00000   8	/* Config space access */
-			       0 0 0		/* no IACK cycles */
-			       c 0ed00000   4   /* Special cycles */
-			       c 0ec80000 100	/* Internal registers */
-			       c 0ec80100  fc>;	/* Internal messaging registers */
+			reg = <0x0000000c 0x0ec00000   0x00000008	/* Config space access */
+			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
+			       0x0000000c 0x0ed00000   0x00000004   /* Special cycles */
+			       0x0000000c 0x0ec80000 0x00000100	/* Internal registers */
+			       0x0000000c 0x0ec80100  0x000000fc>;	/* Internal messaging registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
-				  01000000 0 00000000 0000000c 08000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 0 to 0x3f */
-			bus-range = <0 3f>;
+			bus-range = <0x0 0x3f>;
 
 			/* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
-			interrupt-map-mask = <0000 0 0 0>;
-			interrupt-map = < 0000 0 0 0 &UIC1 0 8 >;
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >;
 		};
 
 		PCIE0: pciex@d00000000 {
@@ -361,23 +363,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
 			primary;
-			port = <0>; /* port number */
-			reg = <d 00000000 20000000	/* Config space access */
-			       c 08010000 00001000>;	/* Registers */
-			dcr-reg = <100 020>;
-			sdr-base = <300>;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08010000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
-				  01000000 0 00000000 0000000f 80000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 40 to 0x7f */
-			bus-range = <40 7f>;
+			bus-range = <0x40 0x7f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -387,12 +389,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC3 c 4 /* swizzled int A */
-				0000 0 0 2 &UIC3 d 4 /* swizzled int B */
-				0000 0 0 3 &UIC3 e 4 /* swizzled int C */
-				0000 0 0 4 &UIC3 f 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
 		};
 
 		PCIE1: pciex@d20000000 {
@@ -402,23 +404,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
 			primary;
-			port = <1>; /* port number */
-			reg = <d 20000000 20000000	/* Config space access */
-			       c 08011000 00001000>;	/* Registers */
-			dcr-reg = <120 020>;
-			sdr-base = <340>;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08011000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
-				  01000000 0 00000000 0000000f 80010000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 80 to 0xbf */
-			bus-range = <80 bf>;
+			bus-range = <0x80 0xbf>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -428,12 +430,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC3 10 4 /* swizzled int A */
-				0000 0 0 2 &UIC3 11 4 /* swizzled int B */
-				0000 0 0 3 &UIC3 12 4 /* swizzled int C */
-				0000 0 0 4 &UIC3 13 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/ebony.dts b/arch/powerpc/boot/dts/ebony.dts
index 5079dc890e0e..ec2d142291b4 100644
--- a/arch/powerpc/boot/dts/ebony.dts
+++ b/arch/powerpc/boot/dts/ebony.dts
@@ -11,12 +11,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "ibm,ebony";
 	compatible = "ibm,ebony";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -32,13 +34,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440GP";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; // Filled in by zImage
 			timebase-frequency = <0>; // Filled in by zImage
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>; /* 32 kB */
-			d-cache-size = <8000>; /* 32 kB */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>; /* 32 kB */
+			d-cache-size = <32768>; /* 32 kB */
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -46,14 +48,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; // Filled in by zImage
+		reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-440gp", "ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -64,17 +66,17 @@
 		compatible = "ibm,uic-440gp", "ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	CPC0: cpc {
 		compatible = "ibm,cpc-440gp";
-		dcr-reg = <0b0 003 0e0 010>;
+		dcr-reg = <0x0b0 0x003 0x0e0 0x010>;
 		// FIXME: anything else?
 	};
 
@@ -87,37 +89,37 @@
 
 		SDRAM0: memory-controller {
 			compatible = "ibm,sdram-440gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 			// FIXME: anything else?
 		};
 
 		SRAM0: sram {
 			compatible = "ibm,sram-440gp";
-			dcr-reg = <020 8 00a 1>;
+			dcr-reg = <0x020 0x008 0x00a 0x001>;
 		};
 
 		DMA0: dma {
 			// FIXME: ???
 			compatible = "ibm,dma-440gp";
-			dcr-reg = <100 027>;
+			dcr-reg = <0x100 0x027>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440gp", "ibm,mcmal";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <4>;
 			num-rx-chans = <4>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					 /*RXEOB*/ 1 &UIC0 b 4
-					 /*SERR*/  2 &UIC1 0 4
-					 /*TXDE*/  3 &UIC1 1 4
-					 /*RXDE*/  4 &UIC1 2 4>;
-			interrupt-map-mask = <ffffffff>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					 /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					 /*SERR*/  0x2 &UIC1 0x0 0x4
+					 /*TXDE*/  0x3 &UIC1 0x1 0x4
+					 /*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
 		};
 
 		POB0: opb {
@@ -126,34 +128,34 @@
 			#size-cells = <1>;
 			/* Wish there was a nicer way of specifying a full 32-bit
 			   range */
-			ranges = <00000000 1 00000000 80000000
-				  80000000 1 80000000 80000000>;
-			dcr-reg = <090 00b>;
+			ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+				  0x80000000 0x00000001 0x80000000 0x80000000>;
+			dcr-reg = <0x090 0x00b>;
 			interrupt-parent = <&UIC1>;
-			interrupts = <7 4>;
+			interrupts = <0x7 0x4>;
 			clock-frequency = <0>; // Filled in by zImage
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440gp", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; // Filled in by zImage
 				// ranges property is supplied by zImage
 				// based on firmware's configuration of the
 				// EBC bridge
-				interrupts = <5 4>;
+				interrupts = <0x5 0x4>;
 				interrupt-parent = <&UIC1>;
 
 				small-flash@0,80000 {
 					compatible = "jedec-flash";
 					bank-width = <1>;
-					reg = <0 80000 80000>;
+					reg = <0x00000000 0x00080000 0x00080000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "OpenBIOS";
-						reg = <0 80000>;
+						reg = <0x00000000 0x00080000>;
 						read-only;
 					};
 				};
@@ -161,101 +163,101 @@
 				nvram@1,0 {
 					/* NVRAM & RTC */
 					compatible = "ds1743-nvram";
-					#bytes = <2000>;
-					reg = <1 0 2000>;
+					#bytes = <0x2000>;
+					reg = <0x00000001 0x00000000 0x00002000>;
 				};
 
 				large-flash@2,0 {
 					compatible = "jedec-flash";
 					bank-width = <1>;
-					reg = <2 0 400000>;
+					reg = <0x00000002 0x00000000 0x00400000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "fs";
-						reg = <0 380000>;
+						reg = <0x00000000 0x00380000>;
 					};
 					partition@380000 {
 						label = "firmware";
-						reg = <380000 80000>;
+						reg = <0x00380000 0x00080000>;
 					};
 				};
 
 				ir@3,0 {
-					reg = <3 0 10>;
+					reg = <0x00000003 0x00000000 0x00000010>;
 				};
 
 				fpga@7,0 {
 					compatible = "Ebony-FPGA";
-					reg = <7 0 10>;
-					virtual-reg = <e8300000>;
+					reg = <0x00000007 0x00000000 0x00000010>;
+					virtual-reg = <0xe8300000>;
 				};
 			};
 
 			UART0: serial@40000200 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <40000200 8>;
-				virtual-reg = <e0000200>;
-				clock-frequency = <A8C000>;
-				current-speed = <2580>;
+				reg = <0x40000200 0x00000008>;
+				virtual-reg = <0xe0000200>;
+				clock-frequency = <11059200>;
+				current-speed = <9600>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <0 4>;
+				interrupts = <0x0 0x4>;
 			};
 
 			UART1: serial@40000300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <40000300 8>;
-				virtual-reg = <e0000300>;
-				clock-frequency = <A8C000>;
-				current-speed = <2580>;
+				reg = <0x40000300 0x00000008>;
+				virtual-reg = <0xe0000300>;
+				clock-frequency = <11059200>;
+				current-speed = <9600>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			IIC0: i2c@40000400 {
 				/* FIXME */
 				compatible = "ibm,iic-440gp", "ibm,iic";
-				reg = <40000400 14>;
+				reg = <0x40000400 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 			IIC1: i2c@40000500 {
 				/* FIXME */
 				compatible = "ibm,iic-440gp", "ibm,iic";
-				reg = <40000500 14>;
+				reg = <0x40000500 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <3 4>;
+				interrupts = <0x3 0x4>;
 			};
 
 			GPIO0: gpio@40000700 {
 				/* FIXME */
 				compatible = "ibm,gpio-440gp";
-				reg = <40000700 20>;
+				reg = <0x40000700 0x00000020>;
 			};
 
 			ZMII0: emac-zmii@40000780 {
 				compatible = "ibm,zmii-440gp", "ibm,zmii";
-				reg = <40000780 c>;
+				reg = <0x40000780 0x0000000c>;
 			};
 
 			EMAC0: ethernet@40000800 {
 				device_type = "network";
 				compatible = "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1c 4 1d 4>;
-				reg = <40000800 70>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0x40000800 0x00000070>;
 				local-mac-address = [000000000000]; // Filled in by zImage
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0 1>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000001>;
+				phy-map = <0x00000001>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <0>;
 			};
@@ -263,18 +265,18 @@
 				device_type = "network";
 				compatible = "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1e 4 1f 4>;
-				reg = <40000900 70>;
+				interrupts = <0x1e 0x4 0x1f 0x4>;
+				reg = <0x40000900 0x00000070>;
 				local-mac-address = [000000000000]; // Filled in by zImage
 				mal-device = <&MAL0>;
 				mal-tx-channel = <2 3>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000001>;
+				phy-map = <0x00000001>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <1>;
 			};
@@ -282,9 +284,9 @@
 
 			GPT0: gpt@40000a00 {
 				/* FIXME */
-				reg = <40000a00 d4>;
+				reg = <0x40000a00 0x000000d4>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <12 4 13 4 14 4 15 4 16 4>;
+				interrupts = <0x12 0x4 0x13 0x4 0x14 0x4 0x15 0x4 0x16 0x4>;
 			};
 
 		};
@@ -296,35 +298,35 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb440gp-pcix", "ibm,plb-pcix";
 			primary;
-			reg = <2 0ec00000 8	/* Config space access */
-			       0 0 0		/* no IACK cycles */
-			       2 0ed00000 4     /* Special cycles */
-			       2 0ec80000 f0	/* Internal registers */
-			       2 0ec80100 fc>;	/* Internal messaging registers */
+			reg = <0x00000002 0x0ec00000 0x00000008	/* Config space access */
+			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
+			       0x00000002 0x0ed00000 0x00000004     /* Special cycles */
+			       0x00000002 0x0ec80000 0x000000f0	/* Internal registers */
+			       0x00000002 0x0ec80100 0x000000fc>;	/* Internal messaging registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 00000003 80000000 0 80000000
-				  01000000 0 00000000 00000002 08000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000003 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x00000002 0x08000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* Ebony has all 4 IRQ pins tied together per slot */
-			interrupt-map-mask = <f800 0 0 0>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
 			interrupt-map = <
 				/* IDSEL 1 */
-				0800 0 0 0 &UIC0 17 8
+				0x800 0x0 0x0 0x0 &UIC0 0x17 0x8
 
 				/* IDSEL 2 */
-				1000 0 0 0 &UIC0 18 8
+				0x1000 0x0 0x0 0x0 &UIC0 0x18 0x8
 
 				/* IDSEL 3 */
-				1800 0 0 0 &UIC0 19 8
+				0x1800 0x0 0x0 0x0 &UIC0 0x19 0x8
 
 				/* IDSEL 4 */
-				2000 0 0 0 &UIC0 1a 8
+				0x2000 0x0 0x0 0x0 &UIC0 0x1a 0x8
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/ep405.dts b/arch/powerpc/boot/dts/ep405.dts
index 92938557ac8a..53ef06cc2134 100644
--- a/arch/powerpc/boot/dts/ep405.dts
+++ b/arch/powerpc/boot/dts/ep405.dts
@@ -9,12 +9,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	model = "ep405";
 	compatible = "ep405";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC;
@@ -29,13 +31,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,405GP";
-			reg = <0>;
-			clock-frequency = <bebc200>; /* Filled in by zImage */
+			reg = <0x00000000>;
+			clock-frequency = <200000000>; /* Filled in by zImage */
 			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <4000>;
-			d-cache-size = <4000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>;
+			d-cache-size = <16384>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -43,14 +45,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0>; /* Filled in by zImage */
+		reg = <0x00000000 0x00000000>; /* Filled in by zImage */
 	};
 
 	UIC0: interrupt-controller {
 		compatible = "ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 9>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -65,91 +67,91 @@
 
 		SDRAM0: memory-controller {
 			compatible = "ibm,sdram-405gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		MAL: mcmal {
 			compatible = "ibm,mcmal-405gp", "ibm,mcmal";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <1>;
 			num-rx-chans = <1>;
 			interrupt-parent = <&UIC0>;
 			interrupts = <
-				b 4 /* TXEOB */
-				c 4 /* RXEOB */
-				a 4 /* SERR */
-				d 4 /* TXDE */
-				e 4 /* RXDE */>;
+				0xb 0x4 /* TXEOB */
+				0xc 0x4 /* RXEOB */
+				0xa 0x4 /* SERR */
+				0xd 0x4 /* TXDE */
+				0xe 0x4 /* RXDE */>;
 		};
 
 		POB0: opb {
 			compatible = "ibm,opb-405gp", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <ef600000 ef600000 a00000>;
-			dcr-reg = <0a0 5>;
+			ranges = <0xef600000 0xef600000 0x00a00000>;
+			dcr-reg = <0x0a0 0x005>;
 			clock-frequency = <0>; /* Filled in by zImage */
 
 			UART0: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600300 8>;
-				virtual-reg = <ef600300>;
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <2580>;
+				current-speed = <9600>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <0 4>;
+				interrupts = <0x0 0x4>;
 			};
 
 			UART1: serial@ef600400 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600400 8>;
-				virtual-reg = <ef600400>;
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <2580>;
+				current-speed = <9600>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			IIC: i2c@ef600500 {
 				compatible = "ibm,iic-405gp", "ibm,iic";
-				reg = <ef600500 11>;
+				reg = <0xef600500 0x00000011>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			GPIO: gpio@ef600700 {
 				compatible = "ibm,gpio-405gp";
-				reg = <ef600700 20>;
+				reg = <0xef600700 0x00000020>;
 			};
 
 			EMAC: ethernet@ef600800 {
-				linux,network-index = <0>;
+				linux,network-index = <0x0>;
 				device_type = "network";
 				compatible = "ibm,emac-405gp", "ibm,emac";
 				interrupt-parent = <&UIC0>;
 				interrupts = <
-					f 4 /* Ethernet */
-					9 4 /* Ethernet Wake Up */>;
+					0xf 0x4 /* Ethernet */
+					0x9 0x4 /* Ethernet Wake Up */>;
 				local-mac-address = [000000000000]; /* Filled in by zImage */
-				reg = <ef600800 70>;
+				reg = <0xef600800 0x00000070>;
 				mal-device = <&MAL>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 			};
 
 		};
 
 		EBC0: ebc {
 			compatible = "ibm,ebc-405gp", "ibm,ebc";
-			dcr-reg = <012 2>;
+			dcr-reg = <0x012 0x002>;
 			#address-cells = <2>;
 			#size-cells = <1>;
 
@@ -163,13 +165,13 @@
 			/* NVRAM and RTC */
 			nvrtc@4,200000 {
 				compatible = "ds1742";
-				reg = <4 200000 0>; /* size fixed up by zImage */
+				reg = <0x00000004 0x00200000 0x00000000>; /* size fixed up by zImage */
 			};
 
 			/* "BCSR" CPLD contains a PCI irq controller */
 			bcsr@4,0 {
 				compatible = "ep405-bcsr";
-				reg = <4 0 10>;
+				reg = <0x00000004 0x00000000 0x00000010>;
 				interrupt-controller;
 				/* Routing table */
 				irq-routing = [	00	/* SYSERR */
@@ -198,26 +200,26 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb405gp-pci", "ibm,plb-pci";
 			primary;
-			reg = <eec00000 8	/* Config space access */
-			       eed80000 4	/* IACK */
-			       eed80000 4	/* Special cycle */
-			       ef480000 40>;	/* Internal registers */
+			reg = <0xeec00000 0x00000008	/* Config space access */
+			       0xeed80000 0x00000004	/* IACK */
+			       0xeed80000 0x00000004	/* Special cycle */
+			       0xef480000 0x00000040>;	/* Internal registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed. Chip supports a second
 			 * IO range but we don't use it for now
 			 */
-			ranges = <02000000 0 80000000 80000000 0 20000000
-				  01000000 0 00000000 e8000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
+				  0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* That's all I know about IRQs on that thing ... */
-			interrupt-map-mask = <f800 0 0 0>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
 			interrupt-map = <
 				/* USB */
-				7000 0 0 0 &UIC0 1e 8 /* IRQ5 */
+				0x7000 0x0 0x0 0x0 &UIC0 0x1e 0x8 /* IRQ5 */
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts
index 0f2fc077d8db..24cf0dba120c 100644
--- a/arch/powerpc/boot/dts/glacier.dts
+++ b/arch/powerpc/boot/dts/glacier.dts
@@ -8,12 +8,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,glacier";
 	compatible = "amcc,glacier", "amcc,canyonlands";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -31,13 +33,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,460GT";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -45,14 +47,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by U-Boot */
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-460gt","ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -62,11 +64,11 @@
 		compatible = "ibm,uic-460gt","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -74,11 +76,11 @@
 		compatible = "ibm,uic-460gt","ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
-		dcr-reg = <0e0 009>;
+		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <a 4 b 4>; /* cascade */
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -86,22 +88,22 @@
 		compatible = "ibm,uic-460gt","ibm,uic";
 		interrupt-controller;
 		cell-index = <3>;
-		dcr-reg = <0f0 009>;
+		dcr-reg = <0x0f0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <10 4 11 4>; /* cascade */
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	SDR0: sdr {
 		compatible = "ibm,sdr-460gt";
-		dcr-reg = <00e 002>;
+		dcr-reg = <0x00e 0x002>;
 	};
 
 	CPR0: cpr {
 		compatible = "ibm,cpr-460gt";
-		dcr-reg = <00c 002>;
+		dcr-reg = <0x00c 0x002>;
 	};
 
 	plb {
@@ -113,75 +115,75 @@
 
 		SDRAM0: sdram {
 			compatible = "ibm,sdram-460gt", "ibm,sdram-405gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <4>;
-			num-rx-chans = <20>;
+			num-rx-chans = <32>;
 			#address-cells = <0>;
 			#size-cells = <0>;
 			interrupt-parent = <&UIC2>;
-			interrupts = <	/*TXEOB*/ 6 4
-					/*RXEOB*/ 7 4
-					/*SERR*/  3 4
-					/*TXDE*/  4 4
-					/*RXDE*/  5 4>;
-			desc-base-addr-high = <8>;
+			interrupts = <	/*TXEOB*/ 0x6 0x4
+					/*RXEOB*/ 0x7 0x4
+					/*SERR*/  0x3 0x4
+					/*TXDE*/  0x4 0x4
+					/*RXDE*/  0x5 0x4>;
+			desc-base-addr-high = <0x8>;
 		};
 
 		POB0: opb {
 			compatible = "ibm,opb-460gt", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <b0000000 4 b0000000 50000000>;
+			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-460gt", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				/* ranges property is supplied by U-Boot */
-				interrupts = <6 4>;
+				interrupts = <0x6 0x4>;
 				interrupt-parent = <&UIC1>;
 
 				nor_flash@0,0 {
 					compatible = "amd,s29gl512n", "cfi-flash";
 					bank-width = <2>;
-					reg = <0 000000 4000000>;
+					reg = <0x00000000 0x00000000 0x04000000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "kernel";
-						reg = <0 1e0000>;
+						reg = <0x00000000 0x001e0000>;
 					};
 					partition@1e0000 {
 						label = "dtb";
-						reg = <1e0000 20000>;
+						reg = <0x001e0000 0x00020000>;
 					};
 					partition@200000 {
 						label = "ramdisk";
-						reg = <200000 1400000>;
+						reg = <0x00200000 0x01400000>;
 					};
 					partition@1600000 {
 						label = "jffs2";
-						reg = <1600000 400000>;
+						reg = <0x01600000 0x00400000>;
 					};
 					partition@1a00000 {
 						label = "user";
-						reg = <1a00000 2560000>;
+						reg = <0x01a00000 0x02560000>;
 					};
 					partition@3f60000 {
 						label = "env";
-						reg = <3f60000 40000>;
+						reg = <0x03f60000 0x00040000>;
 					};
 					partition@3fa0000 {
 						label = "u-boot";
-						reg = <3fa0000 60000>;
+						reg = <0x03fa0000 0x00060000>;
 					};
 				};
 			};
@@ -189,109 +191,109 @@
 			UART0: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600300 8>;
-				virtual-reg = <ef600300>;
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			UART1: serial@ef600400 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600400 8>;
-				virtual-reg = <ef600400>;
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			UART2: serial@ef600500 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600500 8>;
-				virtual-reg = <ef600500>;
+				reg = <0xef600500 0x00000008>;
+				virtual-reg = <0xef600500>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
-				interrupts = <1d 4>;
+				interrupts = <0x1d 0x4>;
 			};
 
 			UART3: serial@ef600600 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600600 8>;
-				virtual-reg = <ef600600>;
+				reg = <0xef600600 0x00000008>;
+				virtual-reg = <0xef600600>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
-				interrupts = <1e 4>;
+				interrupts = <0x1e 0x4>;
 			};
 
 			IIC0: i2c@ef600700 {
 				compatible = "ibm,iic-460gt", "ibm,iic";
-				reg = <ef600700 14>;
+				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600800 {
 				compatible = "ibm,iic-460gt", "ibm,iic";
-				reg = <ef600800 14>;
+				reg = <0xef600800 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <3 4>;
+				interrupts = <0x3 0x4>;
 			};
 
 			ZMII0: emac-zmii@ef600d00 {
 				compatible = "ibm,zmii-460gt", "ibm,zmii";
-				reg = <ef600d00 c>;
+				reg = <0xef600d00 0x0000000c>;
 			};
 
 			RGMII0: emac-rgmii@ef601500 {
 				compatible = "ibm,rgmii-460gt", "ibm,rgmii";
-				reg = <ef601500 8>;
+				reg = <0xef601500 0x00000008>;
 				has-mdio;
 			};
 
 			RGMII1: emac-rgmii@ef601600 {
 				compatible = "ibm,rgmii-460gt", "ibm,rgmii";
-				reg = <ef601600 8>;
+				reg = <0xef601600 0x00000008>;
 				has-mdio;
 			};
 
 			TAH0: emac-tah@ef601350 {
 				compatible = "ibm,tah-460gt", "ibm,tah";
-				reg = <ef601350 30>;
+				reg = <0xef601350 0x00000030>;
 			};
 
 			TAH1: emac-tah@ef601450 {
 				compatible = "ibm,tah-460gt", "ibm,tah";
-				reg = <ef601450 30>;
+				reg = <0xef601450 0x00000030>;
 			};
 
 			EMAC0: ethernet@ef600e00 {
 				device_type = "network";
 				compatible = "ibm,emac-460gt", "ibm,emac4";
 				interrupt-parent = <&EMAC0>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC2 10 4
-						 /*Wake*/   1 &UIC2 14 4>;
-				reg = <ef600e00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
+				reg = <0xef600e00 0x00000074>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <0>;
 				tah-device = <&TAH0>;
@@ -304,23 +306,23 @@
 				device_type = "network";
 				compatible = "ibm,emac-460gt", "ibm,emac4";
 				interrupt-parent = <&EMAC1>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC2 11 4
-						 /*Wake*/   1 &UIC2 15 4>;
-				reg = <ef600f00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+						 /*Wake*/   0x1 &UIC2 0x15 0x4>;
+				reg = <0xef600f00 0x00000074>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <1>;
 				mal-rx-channel = <8>;
 				cell-index = <1>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <1>;
 				tah-device = <&TAH1>;
@@ -334,23 +336,23 @@
 				device_type = "network";
 				compatible = "ibm,emac-460gt", "ibm,emac4";
 				interrupt-parent = <&EMAC2>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC2 12 4
-						 /*Wake*/   1 &UIC2 16 4>;
-				reg = <ef601100 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x12 0x4
+						 /*Wake*/   0x1 &UIC2 0x16 0x4>;
+				reg = <0xef601100 0x00000074>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <2>;
-				mal-rx-channel = <10>;
+				mal-rx-channel = <16>;
 				cell-index = <2>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII1>;
 				rgmii-channel = <0>;
 				has-inverted-stacr-oc;
@@ -362,23 +364,23 @@
 				device_type = "network";
 				compatible = "ibm,emac-460gt", "ibm,emac4";
 				interrupt-parent = <&EMAC3>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC2 13 4
-						 /*Wake*/   1 &UIC2 17 4>;
-				reg = <ef601200 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x13 0x4
+						 /*Wake*/   0x1 &UIC2 0x17 0x4>;
+				reg = <0xef601200 0x00000074>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <3>;
-				mal-rx-channel = <18>;
+				mal-rx-channel = <24>;
 				cell-index = <3>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII1>;
 				rgmii-channel = <1>;
 				has-inverted-stacr-oc;
@@ -396,27 +398,27 @@
 			primary;
 			large-inbound-windows;
 			enable-msi-hole;
-			reg = <c 0ec00000   8	/* Config space access */
-			       0 0 0		/* no IACK cycles */
-			       c 0ed00000   4   /* Special cycles */
-			       c 0ec80000 100	/* Internal registers */
-			       c 0ec80100  fc>;	/* Internal messaging registers */
+			reg = <0x0000000c 0x0ec00000   0x00000008	/* Config space access */
+			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
+			       0x0000000c 0x0ed00000   0x00000004   /* Special cycles */
+			       0x0000000c 0x0ec80000 0x00000100	/* Internal registers */
+			       0x0000000c 0x0ec80100  0x000000fc>;	/* Internal messaging registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
-				  01000000 0 00000000 0000000c 08000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 0 to 0x3f */
-			bus-range = <0 3f>;
+			bus-range = <0x0 0x3f>;
 
 			/* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
-			interrupt-map-mask = <0000 0 0 0>;
-			interrupt-map = < 0000 0 0 0 &UIC1 0 8 >;
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >;
 		};
 
 		PCIE0: pciex@d00000000 {
@@ -426,23 +428,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
 			primary;
-			port = <0>; /* port number */
-			reg = <d 00000000 20000000	/* Config space access */
-			       c 08010000 00001000>;	/* Registers */
-			dcr-reg = <100 020>;
-			sdr-base = <300>;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08010000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
-				  01000000 0 00000000 0000000f 80000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 40 to 0x7f */
-			bus-range = <40 7f>;
+			bus-range = <0x40 0x7f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -452,12 +454,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC3 c 4 /* swizzled int A */
-				0000 0 0 2 &UIC3 d 4 /* swizzled int B */
-				0000 0 0 3 &UIC3 e 4 /* swizzled int C */
-				0000 0 0 4 &UIC3 f 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
 		};
 
 		PCIE1: pciex@d20000000 {
@@ -467,23 +469,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
 			primary;
-			port = <1>; /* port number */
-			reg = <d 20000000 20000000	/* Config space access */
-			       c 08011000 00001000>;	/* Registers */
-			dcr-reg = <120 020>;
-			sdr-base = <340>;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08011000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
-				  01000000 0 00000000 0000000f 80010000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 80 to 0xbf */
-			bus-range = <80 bf>;
+			bus-range = <0x80 0xbf>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -493,12 +495,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC3 10 4 /* swizzled int A */
-				0000 0 0 2 &UIC3 11 4 /* swizzled int B */
-				0000 0 0 3 &UIC3 12 4 /* swizzled int C */
-				0000 0 0 4 &UIC3 13 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/haleakala.dts b/arch/powerpc/boot/dts/haleakala.dts
index b5d95ac24dbf..513bc43a71af 100644
--- a/arch/powerpc/boot/dts/haleakala.dts
+++ b/arch/powerpc/boot/dts/haleakala.dts
@@ -8,12 +8,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	model = "amcc,haleakala";
 	compatible = "amcc,haleakala", "amcc,kilauea";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -28,13 +30,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,405EXr";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <4000>; /* 16 kB */
-			d-cache-size = <4000>; /* 16 kB */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>; /* 16 kB */
+			d-cache-size = <16384>; /* 16 kB */
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -42,14 +44,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0>; /* Filled in by U-Boot */
+		reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
 	};
 
 	UIC0: interrupt-controller {
 		compatible = "ibm,uic-405exr", "ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -59,11 +61,11 @@
 		compatible = "ibm,uic-405exr","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -71,11 +73,11 @@
 		compatible = "ibm,uic-405exr","ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
-		dcr-reg = <0e0 009>;
+		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1c 4 1d 4>; /* cascade */
+		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -88,72 +90,72 @@
 
 		SDRAM0: memory-controller {
 			compatible = "ibm,sdram-405exr";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-405exr", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <2>;
 			num-rx-chans = <2>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					/*RXEOB*/ 1 &UIC0 b 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
-			interrupt-map-mask = <ffffffff>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
 		};
 
 		POB0: opb {
 			compatible = "ibm,opb-405exr", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <80000000 80000000 10000000
-				  ef600000 ef600000 a00000
-				  f0000000 f0000000 10000000>;
-			dcr-reg = <0a0 5>;
+			ranges = <0x80000000 0x80000000 0x10000000
+				  0xef600000 0xef600000 0x00a00000
+				  0xf0000000 0xf0000000 0x10000000>;
+			dcr-reg = <0x0a0 0x005>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-405exr", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				/* ranges property is supplied by U-Boot */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 
 				nor_flash@0,0 {
 					compatible = "amd,s29gl512n", "cfi-flash";
 					bank-width = <2>;
-					reg = <0 000000 4000000>;
+					reg = <0x00000000 0x00000000 0x04000000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "kernel";
-						reg = <0 200000>;
+						reg = <0x00000000 0x00200000>;
 					};
 					partition@200000 {
 						label = "root";
-						reg = <200000 200000>;
+						reg = <0x00200000 0x00200000>;
 					};
 					partition@400000 {
 						label = "user";
-						reg = <400000 3b60000>;
+						reg = <0x00400000 0x03b60000>;
 					};
 					partition@3f60000 {
 						label = "env";
-						reg = <3f60000 40000>;
+						reg = <0x03f60000 0x00040000>;
 					};
 					partition@3fa0000 {
 						label = "u-boot";
-						reg = <3fa0000 60000>;
+						reg = <0x03fa0000 0x00060000>;
 					};
 				};
 			};
@@ -161,68 +163,68 @@
 			UART0: serial@ef600200 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600200 8>;
-				virtual-reg = <ef600200>;
+				reg = <0xef600200 0x00000008>;
+				virtual-reg = <0xef600200>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1a 4>;
+				interrupts = <0x1a 0x4>;
 			};
 
 			UART1: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600300 8>;
-				virtual-reg = <ef600300>;
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			IIC0: i2c@ef600400 {
 				compatible = "ibm,iic-405exr", "ibm,iic";
-				reg = <ef600400 14>;
+				reg = <0xef600400 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600500 {
 				compatible = "ibm,iic-405exr", "ibm,iic";
-				reg = <ef600500 14>;
+				reg = <0xef600500 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <7 4>;
+				interrupts = <0x7 0x4>;
 			};
 
 
 			RGMII0: emac-rgmii@ef600b00 {
 				compatible = "ibm,rgmii-405exr", "ibm,rgmii";
-				reg = <ef600b00 104>;
+				reg = <0xef600b00 0x00000104>;
 				has-mdio;
 			};
 
 			EMAC0: ethernet@ef600900 {
-				linux,network-index = <0>;
+				linux,network-index = <0x0>;
 				device_type = "network";
-				compatible = "ibm,emac-405exr", "ibm,emac4";
+				compatible = "ibm,emac-405exr", "ibm,emac4sync";
 				interrupt-parent = <&EMAC0>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 18 4
-						/*Wake*/  1 &UIC1 1d 4>;
-				reg = <ef600900 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
+				reg = <0xef600900 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <0>;
 				has-inverted-stacr-oc;
@@ -237,23 +239,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
 			primary;
-			port = <0>; /* port number */
-			reg = <a0000000 20000000	/* Config space access */
-			       ef000000 00001000>;	/* Registers */
-			dcr-reg = <040 020>;
-			sdr-base = <400>;
+			port = <0x0>; /* port number */
+			reg = <0xa0000000 0x20000000	/* Config space access */
+			       0xef000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x040 0x020>;
+			sdr-base = <0x400>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 90000000 0 08000000
-				  01000000 0 00000000 e0000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000
+				  0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 0x00 to 0x3f */
-			bus-range = <00 3f>;
+			bus-range = <0x0 0x3f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -263,12 +265,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC2 0 4 /* swizzled int A */
-				0000 0 0 2 &UIC2 1 4 /* swizzled int B */
-				0000 0 0 3 &UIC2 2 4 /* swizzled int C */
-				0000 0 0 4 &UIC2 3 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/holly.dts b/arch/powerpc/boot/dts/holly.dts
index b5d87895fe06..f87fe7b9ced9 100644
--- a/arch/powerpc/boot/dts/holly.dts
+++ b/arch/powerpc/boot/dts/holly.dts
@@ -10,6 +10,8 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	model = "41K7339";
 	compatible = "ibm,holly";
@@ -21,22 +23,22 @@
 		#size-cells =<0>;
 		PowerPC,750CL@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <20>;
-			i-cache-line-size = <20>;
-			d-cache-size = <8000>;
-			i-cache-size = <8000>;
-			d-cache-sets = <80>;
-			i-cache-sets = <80>;
-			timebase-frequency = <2faf080>;
-			clock-frequency = <23c34600>;
-			bus-frequency = <bebc200>;
+			reg = <0x00000000>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			d-cache-sets = <128>;
+			i-cache-sets = <128>;
+			timebase-frequency = <50000000>;
+			clock-frequency = <600000000>;
+			bus-frequency = <200000000>;
 		};
 	};
 
 	memory@0 {
 		device_type = "memory";
-		reg = <00000000 20000000>;
+		reg = <0x00000000 0x20000000>;
 	};
 
   	tsi109@c0000000 {
@@ -44,33 +46,33 @@
 		compatible = "tsi109-bridge", "tsi108-bridge";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <00000000 c0000000 00010000>;
-		reg = <c0000000 00010000>;
+		ranges = <0x00000000 0xc0000000 0x00010000>;
+		reg = <0xc0000000 0x00010000>;
 
 		i2c@7000 {
 			device_type = "i2c";
 			compatible  = "tsi109-i2c", "tsi108-i2c";
 			interrupt-parent = <&MPIC>;
-			interrupts = <e 2>;
-			reg = <7000 400>;
+			interrupts = <0xe 0x2>;
+			reg = <0x00007000 0x00000400>;
 		};
 
 		MDIO: mdio@6000 {
 			device_type = "mdio";
 			compatible = "tsi109-mdio", "tsi108-mdio";
-			reg = <6000 50>;
+			reg = <0x00006000 0x00000050>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 
 			PHY1: ethernet-phy@1 {
 				compatible = "bcm5461a";
-				reg = <1>;
+				reg = <0x00000001>;
 				txc-rxc-delay-disable;
 			};
 
 			PHY2: ethernet-phy@2 {
 				compatible = "bcm5461a";
-				reg = <2>;
+				reg = <0x00000002>;
 				txc-rxc-delay-disable;
 			};
 		};
@@ -80,10 +82,10 @@
 			compatible = "tsi109-ethernet", "tsi108-ethernet";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <6000 200>;
+			reg = <0x00006000 0x00000200>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupt-parent = <&MPIC>;
-			interrupts = <10 2>;
+			interrupts = <0x10 0x2>;
 			mdio-handle = <&MDIO>;
 			phy-handle = <&PHY1>;
 		};
@@ -93,10 +95,10 @@
 			compatible = "tsi109-ethernet", "tsi108-ethernet";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <6400 200>;
+			reg = <0x00006400 0x00000200>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupt-parent = <&MPIC>;
-			interrupts = <11 2>;
+			interrupts = <0x11 0x2>;
 			mdio-handle = <&MDIO>;
 			phy-handle = <&PHY2>;
 		};
@@ -104,23 +106,23 @@
 		serial@7808 {
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <7808 200>;
-			virtual-reg = <c0007808>;
-			clock-frequency = <3F9C6000>;
-			current-speed = <1c200>;
+			reg = <0x00007808 0x00000200>;
+			virtual-reg = <0xc0007808>;
+			clock-frequency = <1067212800>;
+			current-speed = <115200>;
 			interrupt-parent = <&MPIC>;
-			interrupts = <c 2>;
+			interrupts = <0xc 0x2>;
 		};
 
 		serial@7c08 {
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <7c08 200>;
-			virtual-reg = <c0007c08>;
-			clock-frequency = <3F9C6000>;
-			current-speed = <1c200>;
+			reg = <0x00007c08 0x00000200>;
+			virtual-reg = <0xc0007c08>;
+			clock-frequency = <1067212800>;
+			current-speed = <115200>;
 			interrupt-parent = <&MPIC>;
-			interrupts = <d 2>;
+			interrupts = <0xd 0x2>;
 		};
 
 	  	MPIC: pic@7400 {
@@ -128,7 +130,7 @@
 			compatible = "chrp,open-pic";
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			reg = <7400 400>;
+			reg = <0x00007400 0x00000400>;
 			big-endian;
 		};
 
@@ -138,42 +140,42 @@
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
 			#address-cells = <3>;
-			reg = <1000 1000>;
-			bus-range = <0 0>;
+			reg = <0x00001000 0x00001000>;
+			bus-range = <0x0 0x0>;
 			/*----------------------------------------------------+
 			| PCI memory range.
 			| 01 denotes I/O space
 			| 02 denotes 32-bit memory space
 			+----------------------------------------------------*/
-			ranges = <02000000 0 40000000 40000000 0 10000000
-				  01000000 0 00000000 7e000000 0 00010000>;
-			clock-frequency = <7f28154>;
+			ranges = <0x02000000 0x00000000 0x40000000 0x40000000 0x00000000 0x10000000
+				  0x01000000 0x00000000 0x00000000 0x7e000000 0x00000000 0x00010000>;
+			clock-frequency = <133333332>;
 			interrupt-parent = <&MPIC>;
-			interrupts = <17 2>;
-			interrupt-map-mask = <f800 0 0 7>;
+			interrupts = <0x17 0x2>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 			/*----------------------------------------------------+
 			| The INTA, INTB, INTC, INTD are shared.
 			+----------------------------------------------------*/
 			interrupt-map = <
-				0800 0 0 1 &RT0 24 0
-				0800 0 0 2 &RT0 25 0
-				0800 0 0 3 &RT0 26 0
-				0800 0 0 4 &RT0 27 0
-
-				1000 0 0 1 &RT0 25 0
-				1000 0 0 2 &RT0 26 0
-				1000 0 0 3 &RT0 27 0
-				1000 0 0 4 &RT0 24 0
-
-				1800 0 0 1 &RT0 26 0
-				1800 0 0 2 &RT0 27 0
-				1800 0 0 3 &RT0 24 0
-				1800 0 0 4 &RT0 25 0
-
-				2000 0 0 1 &RT0 27 0
-				2000 0 0 2 &RT0 24 0
-				2000 0 0 3 &RT0 25 0
-				2000 0 0 4 &RT0 26 0
+				0x800 0x0 0x0 0x1 &RT0 0x24 0x0
+				0x800 0x0 0x0 0x2 &RT0 0x25 0x0
+				0x800 0x0 0x0 0x3 &RT0 0x26 0x0
+				0x800 0x0 0x0 0x4 &RT0 0x27 0x0
+
+				0x1000 0x0 0x0 0x1 &RT0 0x25 0x0
+				0x1000 0x0 0x0 0x2 &RT0 0x26 0x0
+				0x1000 0x0 0x0 0x3 &RT0 0x27 0x0
+				0x1000 0x0 0x0 0x4 &RT0 0x24 0x0
+
+				0x1800 0x0 0x0 0x1 &RT0 0x26 0x0
+				0x1800 0x0 0x0 0x2 &RT0 0x27 0x0
+				0x1800 0x0 0x0 0x3 &RT0 0x24 0x0
+				0x1800 0x0 0x0 0x4 &RT0 0x25 0x0
+
+				0x2000 0x0 0x0 0x1 &RT0 0x27 0x0
+				0x2000 0x0 0x0 0x2 &RT0 0x24 0x0
+				0x2000 0x0 0x0 0x3 &RT0 0x25 0x0
+				0x2000 0x0 0x0 0x4 &RT0 0x26 0x0
 				>;
 
 			RT0: router@1180 {
@@ -183,7 +185,7 @@
  				clock-frequency = <0>;
  				#address-cells = <0>;
  				#interrupt-cells = <2>;
- 				interrupts = <17 2>;
+ 				interrupts = <0x17 0x2>;
 				interrupt-parent = <&MPIC>;
 			};
 		};
diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts
index cc2873a531d2..077819bc3cbd 100644
--- a/arch/powerpc/boot/dts/katmai.dts
+++ b/arch/powerpc/boot/dts/katmai.dts
@@ -12,12 +12,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,katmai";
 	compatible = "amcc,katmai";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -33,13 +35,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440SPe";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by zImage */
 			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -47,14 +49,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by zImage */
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-440spe","ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -64,11 +66,11 @@
 		compatible = "ibm,uic-440spe","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -76,11 +78,11 @@
 		compatible = "ibm,uic-440spe","ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
-		dcr-reg = <0e0 009>;
+		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <a 4 b 4>; /* cascade */
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -88,22 +90,22 @@
 		compatible = "ibm,uic-440spe","ibm,uic";
 		interrupt-controller;
 		cell-index = <3>;
-		dcr-reg = <0f0 009>;
+		dcr-reg = <0x0f0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <10 4 11 4>; /* cascade */
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	SDR0: sdr {
 		compatible = "ibm,sdr-440spe";
-		dcr-reg = <00e 002>;
+		dcr-reg = <0x00e 0x002>;
 	};
 
 	CPR0: cpr {
 		compatible = "ibm,cpr-440spe";
-		dcr-reg = <00c 002>;
+		dcr-reg = <0x00c 0x002>;
 	};
 
 	plb {
@@ -115,108 +117,108 @@
 
 		SDRAM0: sdram {
 			compatible = "ibm,sdram-440spe", "ibm,sdram-405gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440spe", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <2>;
 			num-rx-chans = <1>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC1 6 4
-					 /*RXEOB*/ 1 &UIC1 7 4
-					 /*SERR*/  2 &UIC1 1 4
-					 /*TXDE*/  3 &UIC1 2 4
-					 /*RXDE*/  4 &UIC1 3 4>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC1 0x6 0x4
+					 /*RXEOB*/ 0x1 &UIC1 0x7 0x4
+					 /*SERR*/  0x2 &UIC1 0x1 0x4
+					 /*TXDE*/  0x3 &UIC1 0x2 0x4
+					 /*RXDE*/  0x4 &UIC1 0x3 0x4>;
 		};
 
 		POB0: opb {
 			compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <00000000 4 e0000000 20000000>;
+			ranges = <0x00000000 0x00000004 0xe0000000 0x20000000>;
 			clock-frequency = <0>; /* Filled in by zImage */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 			};
 
 			UART0: serial@10000200 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <10000200 8>;
-				virtual-reg = <a0000200>;
+				reg = <0x10000200 0x00000008>;
+				virtual-reg = <0xa0000200>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <1c200>;
+				current-speed = <115200>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <0 4>;
+				interrupts = <0x0 0x4>;
 			};
 
 			UART1: serial@10000300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <10000300 8>;
-				virtual-reg = <a0000300>;
+				reg = <0x10000300 0x00000008>;
+				virtual-reg = <0xa0000300>;
 				clock-frequency = <0>;
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 
 			UART2: serial@10000600 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <10000600 8>;
-				virtual-reg = <a0000600>;
+				reg = <0x10000600 0x00000008>;
+				virtual-reg = <0xa0000600>;
 				clock-frequency = <0>;
 				current-speed = <0>;
 				interrupt-parent = <&UIC1>;
-				interrupts = <5 4>;
+				interrupts = <0x5 0x4>;
 			};
 
 			IIC0: i2c@10000400 {
 				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
-				reg = <10000400 14>;
+				reg = <0x10000400 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@10000500 {
 				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
-				reg = <10000500 14>;
+				reg = <0x10000500 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <3 4>;
+				interrupts = <0x3 0x4>;
 			};
 
 			EMAC0: ethernet@10000800 {
-				linux,network-index = <0>;
+				linux,network-index = <0x0>;
 				device_type = "network";
 				compatible = "ibm,emac-440spe", "ibm,emac4";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1c 4 1d 4>;
-				reg = <10000800 70>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0x10000800 0x00000074>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "gmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				has-inverted-stacr-oc;
 				has-new-stacr-staopc;
 			};
@@ -231,23 +233,23 @@
 			primary;
 			large-inbound-windows;
 			enable-msi-hole;
-			reg = <c 0ec00000   8	/* Config space access */
-			       0 0 0		/* no IACK cycles */
-			       c 0ed00000   4   /* Special cycles */
-			       c 0ec80000 100	/* Internal registers */
-			       c 0ec80100  fc>;	/* Internal messaging registers */
+			reg = <0x0000000c 0x0ec00000   0x00000008	/* Config space access */
+			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
+			       0x0000000c 0x0ed00000   0x00000004   /* Special cycles */
+			       0x0000000c 0x0ec80000 0x00000100	/* Internal registers */
+			       0x0000000c 0x0ec80100  0x000000fc>;	/* Internal messaging registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
-				  01000000 0 00000000 0000000c 08000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 0 to 0xf */
-			bus-range = <0 f>;
+			bus-range = <0x0 0xf>;
 
 			/*
 			 * On Katmai, the following PCI-X interrupts signals
@@ -258,13 +260,13 @@
 			 * INTC: J2: 1-2
 			 * INTD: J1: 1-2
 			 */
-			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 			interrupt-map = <
 				/* IDSEL 1 */
-				0800 0 0 1 &UIC1 14 8
-				0800 0 0 2 &UIC1 13 8
-				0800 0 0 3 &UIC1 12 8
-				0800 0 0 4 &UIC1 11 8
+				0x800 0x0 0x0 0x1 &UIC1 0x14 0x8
+				0x800 0x0 0x0 0x2 &UIC1 0x13 0x8
+				0x800 0x0 0x0 0x3 &UIC1 0x12 0x8
+				0x800 0x0 0x0 0x4 &UIC1 0x11 0x8
 			>;
 		};
 
@@ -275,23 +277,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
 			primary;
-			port = <0>; /* port number */
-			reg = <d 00000000 20000000	/* Config space access */
-			       c 10000000 00001000>;	/* Registers */
-			dcr-reg = <100 020>;
-			sdr-base = <300>;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
-				  01000000 0 00000000 0000000f 80000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 10 to 0x1f */
-			bus-range = <10 1f>;
+			bus-range = <0x10 0x1f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -301,12 +303,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC3 0 4 /* swizzled int A */
-				0000 0 0 2 &UIC3 1 4 /* swizzled int B */
-				0000 0 0 3 &UIC3 2 4 /* swizzled int C */
-				0000 0 0 4 &UIC3 3 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
 		};
 
 		PCIE1: pciex@d20000000 {
@@ -316,23 +318,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
 			primary;
-			port = <1>; /* port number */
-			reg = <d 20000000 20000000	/* Config space access */
-			       c 10001000 00001000>;	/* Registers */
-			dcr-reg = <120 020>;
-			sdr-base = <340>;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10001000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
-				  01000000 0 00000000 0000000f 80010000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 10 to 0x1f */
-			bus-range = <20 2f>;
+			bus-range = <0x20 0x2f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -342,12 +344,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC3 4 4 /* swizzled int A */
-				0000 0 0 2 &UIC3 5 4 /* swizzled int B */
-				0000 0 0 3 &UIC3 6 4 /* swizzled int C */
-				0000 0 0 4 &UIC3 7 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
 		};
 
 		PCIE2: pciex@d40000000 {
@@ -357,23 +359,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
 			primary;
-			port = <2>; /* port number */
-			reg = <d 40000000 20000000	/* Config space access */
-			       c 10002000 00001000>;	/* Registers */
-			dcr-reg = <140 020>;
-			sdr-base = <370>;
+			port = <0x2>; /* port number */
+			reg = <0x0000000d 0x40000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10002000 0x00001000>;	/* Registers */
+			dcr-reg = <0x140 0x020>;
+			sdr-base = <0x370>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000f 00000000 0 80000000
-				  01000000 0 00000000 0000000f 80020000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 10 to 0x1f */
-			bus-range = <30 3f>;
+			bus-range = <0x30 0x3f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -383,12 +385,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC3 8 4 /* swizzled int A */
-				0000 0 0 2 &UIC3 9 4 /* swizzled int B */
-				0000 0 0 3 &UIC3 a 4 /* swizzled int C */
-				0000 0 0 4 &UIC3 b 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts
index 48c9a6e71f1a..dececc4b5ff2 100644
--- a/arch/powerpc/boot/dts/kilauea.dts
+++ b/arch/powerpc/boot/dts/kilauea.dts
@@ -8,12 +8,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	model = "amcc,kilauea";
 	compatible = "amcc,kilauea";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -29,13 +31,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,405EX";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <4000>; /* 16 kB */
-			d-cache-size = <4000>; /* 16 kB */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>; /* 16 kB */
+			d-cache-size = <16384>; /* 16 kB */
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -43,14 +45,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0>; /* Filled in by U-Boot */
+		reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
 	};
 
 	UIC0: interrupt-controller {
 		compatible = "ibm,uic-405ex", "ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -60,11 +62,11 @@
 		compatible = "ibm,uic-405ex","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -72,11 +74,11 @@
 		compatible = "ibm,uic-405ex","ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
-		dcr-reg = <0e0 009>;
+		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1c 4 1d 4>; /* cascade */
+		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -89,72 +91,72 @@
 
 		SDRAM0: memory-controller {
 			compatible = "ibm,sdram-405ex";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-405ex", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <2>;
 			num-rx-chans = <2>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					/*RXEOB*/ 1 &UIC0 b 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
-			interrupt-map-mask = <ffffffff>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
 		};
 
 		POB0: opb {
 			compatible = "ibm,opb-405ex", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <80000000 80000000 10000000
-				  ef600000 ef600000 a00000
-				  f0000000 f0000000 10000000>;
-			dcr-reg = <0a0 5>;
+			ranges = <0x80000000 0x80000000 0x10000000
+				  0xef600000 0xef600000 0x00a00000
+				  0xf0000000 0xf0000000 0x10000000>;
+			dcr-reg = <0x0a0 0x005>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-405ex", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				/* ranges property is supplied by U-Boot */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 
 				nor_flash@0,0 {
 					compatible = "amd,s29gl512n", "cfi-flash";
 					bank-width = <2>;
-					reg = <0 000000 4000000>;
+					reg = <0x00000000 0x00000000 0x04000000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "kernel";
-						reg = <0 200000>;
+						reg = <0x00000000 0x00200000>;
 					};
 					partition@200000 {
 						label = "root";
-						reg = <200000 200000>;
+						reg = <0x00200000 0x00200000>;
 					};
 					partition@400000 {
 						label = "user";
-						reg = <400000 3b60000>;
+						reg = <0x00400000 0x03b60000>;
 					};
 					partition@3f60000 {
 						label = "env";
-						reg = <3f60000 40000>;
+						reg = <0x03f60000 0x00040000>;
 					};
 					partition@3fa0000 {
 						label = "u-boot";
-						reg = <3fa0000 60000>;
+						reg = <0x03fa0000 0x00060000>;
 					};
 				};
 			};
@@ -162,68 +164,68 @@
 			UART0: serial@ef600200 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600200 8>;
-				virtual-reg = <ef600200>;
+				reg = <0xef600200 0x00000008>;
+				virtual-reg = <0xef600200>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1a 4>;
+				interrupts = <0x1a 0x4>;
 			};
 
 			UART1: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600300 8>;
-				virtual-reg = <ef600300>;
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			IIC0: i2c@ef600400 {
 				compatible = "ibm,iic-405ex", "ibm,iic";
-				reg = <ef600400 14>;
+				reg = <0xef600400 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600500 {
 				compatible = "ibm,iic-405ex", "ibm,iic";
-				reg = <ef600500 14>;
+				reg = <0xef600500 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <7 4>;
+				interrupts = <0x7 0x4>;
 			};
 
 
 			RGMII0: emac-rgmii@ef600b00 {
 				compatible = "ibm,rgmii-405ex", "ibm,rgmii";
-				reg = <ef600b00 104>;
+				reg = <0xef600b00 0x00000104>;
 				has-mdio;
 			};
 
 			EMAC0: ethernet@ef600900 {
-				linux,network-index = <0>;
+				linux,network-index = <0x0>;
 				device_type = "network";
-				compatible = "ibm,emac-405ex", "ibm,emac4";
+				compatible = "ibm,emac-405ex", "ibm,emac4sync";
 				interrupt-parent = <&EMAC0>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 18 4
-						/*Wake*/  1 &UIC1 1d 4>;
-				reg = <ef600900 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
+				reg = <0xef600900 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <0>;
 				has-inverted-stacr-oc;
@@ -231,27 +233,27 @@
 			};
 
 			EMAC1: ethernet@ef600a00 {
-				linux,network-index = <1>;
+				linux,network-index = <0x1>;
 				device_type = "network";
-				compatible = "ibm,emac-405ex", "ibm,emac4";
+				compatible = "ibm,emac-405ex", "ibm,emac4sync";
 				interrupt-parent = <&EMAC1>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 19 4
-						/*Wake*/  1 &UIC1 1f 4>;
-				reg = <ef600a00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+						/*Wake*/  0x1 &UIC1 0x1f 0x4>;
+				reg = <0xef600a00 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <1>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <1>;
 				has-inverted-stacr-oc;
@@ -266,23 +268,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
 			primary;
-			port = <0>; /* port number */
-			reg = <a0000000 20000000	/* Config space access */
-			       ef000000 00001000>;	/* Registers */
-			dcr-reg = <040 020>;
-			sdr-base = <400>;
+			port = <0x0>; /* port number */
+			reg = <0xa0000000 0x20000000	/* Config space access */
+			       0xef000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x040 0x020>;
+			sdr-base = <0x400>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 90000000 0 08000000
-				  01000000 0 00000000 e0000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000
+				  0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 0x00 to 0x3f */
-			bus-range = <00 3f>;
+			bus-range = <0x0 0x3f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -292,12 +294,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC2 0 4 /* swizzled int A */
-				0000 0 0 2 &UIC2 1 4 /* swizzled int B */
-				0000 0 0 3 &UIC2 2 4 /* swizzled int C */
-				0000 0 0 4 &UIC2 3 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>;
 		};
 
 		PCIE1: pciex@0c0000000 {
@@ -307,23 +309,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
 			primary;
-			port = <1>; /* port number */
-			reg = <c0000000 20000000	/* Config space access */
-			       ef001000 00001000>;	/* Registers */
-			dcr-reg = <060 020>;
-			sdr-base = <440>;
+			port = <0x1>; /* port number */
+			reg = <0xc0000000 0x20000000	/* Config space access */
+			       0xef001000 0x00001000>;	/* Registers */
+			dcr-reg = <0x060 0x020>;
+			sdr-base = <0x440>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 98000000 0 08000000
-				  01000000 0 00000000 e0010000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x98000000 0x00000000 0x08000000
+				  0x01000000 0x00000000 0x00000000 0xe0010000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 0x40 to 0x7f */
-			bus-range = <40 7f>;
+			bus-range = <0x40 0x7f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -333,12 +335,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC2 b 4 /* swizzled int A */
-				0000 0 0 2 &UIC2 c 4 /* swizzled int B */
-				0000 0 0 3 &UIC2 d 4 /* swizzled int C */
-				0000 0 0 4 &UIC2 e 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC2 0xb 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC2 0xc 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts
index f869ce3ca0b7..49737589ffc8 100644
--- a/arch/powerpc/boot/dts/ksi8560.dts
+++ b/arch/powerpc/boot/dts/ksi8560.dts
@@ -40,6 +40,7 @@
 			timebase-frequency = <0>;		/* From U-boot */
 			bus-frequency = <0>;			/* From U-boot */
 			clock-frequency = <0>;			/* From U-boot */
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -58,16 +59,16 @@
 		memory-controller@2000 {
 			compatible = "fsl,8540-memory-controller";
 			reg = <0x2000 0x1000>;
-			interrupt-parent = <&MPIC>;
+			interrupt-parent = <&mpic>;
 			interrupts = <0x12 0x2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <0x20>;		/* 32 bytes */
 			cache-size = <0x40000>;			/* L2, 256K */
-			interrupt-parent = <&MPIC>;
+			interrupt-parent = <&mpic>;
 			interrupts = <0x10 0x2>;
 		};
 
@@ -78,10 +79,51 @@
 			compatible = "fsl-i2c";
 			reg = <0x3000 0x100>;
 			interrupts = <0x2b 0x2>;
-			interrupt-parent = <&MPIC>;
+			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {					/* For TSECs */
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -89,13 +131,13 @@
 			reg = <0x24520 0x20>;
 
 			PHY1: ethernet-phy@1 {
-				interrupt-parent = <&MPIC>;
+				interrupt-parent = <&mpic>;
 				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
 
 			PHY2: ethernet-phy@2 {
-				interrupt-parent = <&MPIC>;
+				interrupt-parent = <&mpic>;
 				reg = <0x2>;
 				device_type = "ethernet-phy";
 			};
@@ -109,7 +151,7 @@
 			/* Mac address filled in by bootwrapper */
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
-			interrupt-parent = <&MPIC>;
+			interrupt-parent = <&mpic>;
 			phy-handle = <&PHY1>;
 		};
 
@@ -121,11 +163,11 @@
 			/* Mac address filled in by bootwrapper */
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
-			interrupt-parent = <&MPIC>;
+			interrupt-parent = <&mpic>;
 			phy-handle = <&PHY2>;
 		};
 
-		MPIC: pic@40000 {
+		mpic: pic@40000 {
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
@@ -164,7 +206,7 @@
 				#interrupt-cells = <2>;
 				interrupt-controller;
 				interrupts = <0x2e 0x2>;
-				interrupt-parent = <&MPIC>;
+				interrupt-parent = <&mpic>;
 				reg = <0x90c00 0x80>;
 				compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
 			};
@@ -202,7 +244,7 @@
 				fsl,mdc-pin = <25>;
 
 				PHY0: ethernet-phy@0 {
-					interrupt-parent = <&MPIC>;
+					interrupt-parent = <&mpic>;
 					reg = <0x0>;
 					device_type = "ethernet-phy";
 				};
diff --git a/arch/powerpc/boot/dts/makalu.dts b/arch/powerpc/boot/dts/makalu.dts
index 84cc5e72ddd8..945508c7e7d8 100644
--- a/arch/powerpc/boot/dts/makalu.dts
+++ b/arch/powerpc/boot/dts/makalu.dts
@@ -8,12 +8,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	model = "amcc,makalu";
 	compatible = "amcc,makalu";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -29,13 +31,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,405EX";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <4000>; /* 16 kB */
-			d-cache-size = <4000>; /* 16 kB */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>; /* 16 kB */
+			d-cache-size = <16384>; /* 16 kB */
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -43,14 +45,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0>; /* Filled in by U-Boot */
+		reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
 	};
 
 	UIC0: interrupt-controller {
 		compatible = "ibm,uic-405ex", "ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -60,11 +62,11 @@
 		compatible = "ibm,uic-405ex","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -72,11 +74,11 @@
 		compatible = "ibm,uic-405ex","ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
-		dcr-reg = <0e0 009>;
+		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1c 4 1d 4>; /* cascade */
+		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -89,72 +91,72 @@
 
 		SDRAM0: memory-controller {
 			compatible = "ibm,sdram-405ex";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-405ex", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <2>;
 			num-rx-chans = <2>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					/*RXEOB*/ 1 &UIC0 b 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
-			interrupt-map-mask = <ffffffff>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
 		};
 
 		POB0: opb {
 			compatible = "ibm,opb-405ex", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <80000000 80000000 10000000
-				  ef600000 ef600000 a00000
-				  f0000000 f0000000 10000000>;
-			dcr-reg = <0a0 5>;
+			ranges = <0x80000000 0x80000000 0x10000000
+				  0xef600000 0xef600000 0x00a00000
+				  0xf0000000 0xf0000000 0x10000000>;
+			dcr-reg = <0x0a0 0x005>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-405ex", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				/* ranges property is supplied by U-Boot */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 
 				nor_flash@0,0 {
 					compatible = "amd,s29gl512n", "cfi-flash";
 					bank-width = <2>;
-					reg = <0 000000 4000000>;
+					reg = <0x00000000 0x00000000 0x04000000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "kernel";
-						reg = <0 200000>;
+						reg = <0x00000000 0x00200000>;
 					};
 					partition@200000 {
 						label = "root";
-						reg = <200000 200000>;
+						reg = <0x00200000 0x00200000>;
 					};
 					partition@400000 {
 						label = "user";
-						reg = <400000 3b60000>;
+						reg = <0x00400000 0x03b60000>;
 					};
 					partition@3f60000 {
 						label = "env";
-						reg = <3f60000 40000>;
+						reg = <0x03f60000 0x00040000>;
 					};
 					partition@3fa0000 {
 						label = "u-boot";
-						reg = <3fa0000 60000>;
+						reg = <0x03fa0000 0x00060000>;
 					};
 				};
 			};
@@ -162,68 +164,68 @@
 			UART0: serial@ef600200 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600200 8>;
-				virtual-reg = <ef600200>;
+				reg = <0xef600200 0x00000008>;
+				virtual-reg = <0xef600200>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1a 4>;
+				interrupts = <0x1a 0x4>;
 			};
 
 			UART1: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600300 8>;
-				virtual-reg = <ef600300>;
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			IIC0: i2c@ef600400 {
 				compatible = "ibm,iic-405ex", "ibm,iic";
-				reg = <ef600400 14>;
+				reg = <0xef600400 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600500 {
 				compatible = "ibm,iic-405ex", "ibm,iic";
-				reg = <ef600500 14>;
+				reg = <0xef600500 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <7 4>;
+				interrupts = <0x7 0x4>;
 			};
 
 
 			RGMII0: emac-rgmii@ef600b00 {
 				compatible = "ibm,rgmii-405ex", "ibm,rgmii";
-				reg = <ef600b00 104>;
+				reg = <0xef600b00 0x00000104>;
 				has-mdio;
 			};
 
 			EMAC0: ethernet@ef600900 {
-				linux,network-index = <0>;
+				linux,network-index = <0x0>;
 				device_type = "network";
-				compatible = "ibm,emac-405ex", "ibm,emac4";
+				compatible = "ibm,emac-405ex", "ibm,emac4sync";
 				interrupt-parent = <&EMAC0>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 18 4
-						/*Wake*/  1 &UIC1 1d 4>;
-				reg = <ef600900 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
+				reg = <0xef600900 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <0000003f>;	/* Start at 6 */
+				phy-map = <0x0000003f>;	/* Start at 6 */
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <0>;
 				has-inverted-stacr-oc;
@@ -231,27 +233,27 @@
 			};
 
 			EMAC1: ethernet@ef600a00 {
-				linux,network-index = <1>;
+				linux,network-index = <0x1>;
 				device_type = "network";
-				compatible = "ibm,emac-405ex", "ibm,emac4";
+				compatible = "ibm,emac-405ex", "ibm,emac4sync";
 				interrupt-parent = <&EMAC1>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 19 4
-						/*Wake*/  1 &UIC1 1f 4>;
-				reg = <ef600a00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+						/*Wake*/  0x1 &UIC1 0x1f 0x4>;
+				reg = <0xef600a00 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <1>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <1>;
 				has-inverted-stacr-oc;
@@ -266,23 +268,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
 			primary;
-			port = <0>; /* port number */
-			reg = <a0000000 20000000	/* Config space access */
-			       ef000000 00001000>;	/* Registers */
-			dcr-reg = <040 020>;
-			sdr-base = <400>;
+			port = <0x0>; /* port number */
+			reg = <0xa0000000 0x20000000	/* Config space access */
+			       0xef000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x040 0x020>;
+			sdr-base = <0x400>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 90000000 0 08000000
-				  01000000 0 00000000 e0000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000
+				  0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 0x00 to 0x3f */
-			bus-range = <00 3f>;
+			bus-range = <0x0 0x3f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -292,12 +294,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC2 0 4 /* swizzled int A */
-				0000 0 0 2 &UIC2 1 4 /* swizzled int B */
-				0000 0 0 3 &UIC2 2 4 /* swizzled int C */
-				0000 0 0 4 &UIC2 3 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>;
 		};
 
 		PCIE1: pciex@0c0000000 {
@@ -307,23 +309,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
 			primary;
-			port = <1>; /* port number */
-			reg = <c0000000 20000000	/* Config space access */
-			       ef001000 00001000>;	/* Registers */
-			dcr-reg = <060 020>;
-			sdr-base = <440>;
+			port = <0x1>; /* port number */
+			reg = <0xc0000000 0x20000000	/* Config space access */
+			       0xef001000 0x00001000>;	/* Registers */
+			dcr-reg = <0x060 0x020>;
+			sdr-base = <0x440>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 98000000 0 08000000
-				  01000000 0 00000000 e0010000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x98000000 0x00000000 0x08000000
+				  0x01000000 0x00000000 0x00000000 0xe0010000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 0x40 to 0x7f */
-			bus-range = <40 7f>;
+			bus-range = <0x40 0x7f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -333,12 +335,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC2 b 4 /* swizzled int A */
-				0000 0 0 2 &UIC2 c 4 /* swizzled int B */
-				0000 0 0 3 &UIC2 d 4 /* swizzled int C */
-				0000 0 0 4 &UIC2 e 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC2 0xb 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC2 0xc 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts
index 94ad7b2b241e..1f9036c317b4 100644
--- a/arch/powerpc/boot/dts/mpc5121ads.dts
+++ b/arch/powerpc/boot/dts/mpc5121ads.dts
@@ -1,7 +1,7 @@
 /*
- * MPC5121E MDS Device Tree Source
+ * MPC5121E ADS Device Tree Source
  *
- * Copyright 2007 Freescale Semiconductor Inc.
+ * Copyright 2007,2008 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -17,6 +17,10 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	aliases {
+		pci = &pci;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -39,8 +43,41 @@
 		reg = <0x00000000 0x10000000>;	// 256MB at 0
 	};
 
+	mbx@20000000 {
+		compatible = "fsl,mpc5121-mbx";
+		reg = <0x20000000 0x4000>;
+		interrupts = <66 0x8>;
+		interrupt-parent = < &ipic >;
+	};
+
+	sram@30000000 {
+		compatible = "fsl,mpc5121-sram";
+		reg = <0x30000000 0x20000>;		// 128K at 0x30000000
+	};
+
+	nfc@40000000 {
+		compatible = "fsl,mpc5121-nfc";
+		reg = <0x40000000 0x100000>;	// 1M at 0x40000000
+		interrupts = <6 8>;
+		interrupt-parent = < &ipic >;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <1>;
+		// ADS has two Hynix 512MB Nand flash chips in a single
+		// stacked package .
+		chips = <2>;
+		nand0@0 {
+			label = "nand0";
+			reg = <0x00000000 0x02000000>; 	// first 32 MB of chip 0
+		};
+		nand1@20000000 {
+			label = "nand1";
+			reg = <0x20000000 0x02000000>; 	// first 32 MB of chip 1
+		};
+	};
+
 	localbus@80000020 {
-		compatible = "fsl,mpc5121ads-localbus";
+		compatible = "fsl,mpc5121-localbus";
 		#address-cells = <2>;
 		#size-cells = <1>;
 		reg = <0x80000020 0x40>;
@@ -51,14 +88,51 @@
 		flash@0,0 {
 			compatible = "cfi-flash";
 			reg = <0 0x0 0x4000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			bank-width = <4>;
-			device-width = <1>;
+			device-width = <2>;
+			protected@0 {
+				label = "protected";
+				reg = <0x00000000 0x00040000>;  // first sector is protected
+				read-only;
+			};
+			filesystem@40000 {
+				label = "filesystem";
+				reg = <0x00040000 0x03c00000>;  // 60M for filesystem
+			};
+			kernel@3c40000 {
+				label = "kernel";
+				reg = <0x03c40000 0x00280000>;  // 2.5M for kernel
+			};
+			device-tree@3ec0000 {
+				label = "device-tree";
+				reg = <0x03ec0000 0x00040000>;  // one sector for device tree
+			};
+			u-boot@3f00000 {
+				label = "u-boot";
+				reg = <0x03f00000 0x00100000>;  // 1M for u-boot
+				read-only;
+			};
 		};
 
 		board-control@2,0 {
 			compatible = "fsl,mpc5121ads-cpld";
 			reg = <0x2 0x0 0x8000>;
 		};
+
+		cpld_pic: pic@2,a {
+			compatible = "fsl,mpc5121ads-cpld-pic";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x2 0xa 0x5>;
+			interrupt-parent = < &ipic >;
+			// irq routing
+			//	all irqs but touch screen are routed to irq0 (ipic 48)
+			//	touch screen is statically routed to irq1 (ipic 17)
+			//	so don't use it here
+			interrupts = <48 0x8>;
+		};
 	};
 
 	soc@80000000 {
@@ -85,38 +159,252 @@
 			reg = <0xc00 0x100>;
 		};
 
-		// 512x PSCs are not 52xx PSCs compatible
+		rtc@a00 {	// Real time clock
+			compatible = "fsl,mpc5121-rtc";
+			reg = <0xa00 0x100>;
+			interrupts = <79 0x8 80 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		clock@f00 {	// Clock control
+			compatible = "fsl,mpc5121-clock";
+			reg = <0xf00 0x100>;
+		};
+
+		pmc@1000{  //Power Management Controller
+			compatible = "fsl,mpc5121-pmc";
+			reg = <0x1000 0x100>;
+			interrupts = <83 0x2>;
+			interrupt-parent = < &ipic >;
+		};
+
+		gpio@1100 {
+			compatible = "fsl,mpc5121-gpio";
+			reg = <0x1100 0x100>;
+			interrupts = <78 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		mscan@1300 {
+			compatible = "fsl,mpc5121-mscan";
+			cell-index = <0>;
+			interrupts = <12 0x8>;
+			interrupt-parent = < &ipic >;
+			reg = <0x1300 0x80>;
+		};
+
+		mscan@1380 {
+			compatible = "fsl,mpc5121-mscan";
+			cell-index = <1>;
+			interrupts = <13 0x8>;
+			interrupt-parent = < &ipic >;
+			reg = <0x1380 0x80>;
+		};
+
+		i2c@1700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			cell-index = <0>;
+			reg = <0x1700 0x20>;
+			interrupts = <9 0x8>;
+			interrupt-parent = < &ipic >;
+			fsl5200-clocking;
+		};
+
+		i2c@1720 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			cell-index = <1>;
+			reg = <0x1720 0x20>;
+			interrupts = <10 0x8>;
+			interrupt-parent = < &ipic >;
+			fsl5200-clocking;
+		};
+
+		i2c@1740 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			cell-index = <2>;
+			reg = <0x1740 0x20>;
+			interrupts = <11 0x8>;
+			interrupt-parent = < &ipic >;
+			fsl5200-clocking;
+		};
+
+		i2ccontrol@1760 {
+			compatible = "fsl,mpc5121-i2c-ctrl";
+			reg = <0x1760 0x8>;
+		};
+
+		axe@2000 {
+			compatible = "fsl,mpc5121-axe";
+			reg = <0x2000 0x100>;
+			interrupts = <42 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		display@2100 {
+			compatible = "fsl,mpc5121-diu", "fsl-diu";
+			reg = <0x2100 0x100>;
+			interrupts = <64 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		mdio@2800 {
+			compatible = "fsl,mpc5121-fec-mdio";
+			reg = <0x2800 0x800>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy: ethernet-phy@0 {
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@2800 {
+			device_type = "network";
+			compatible = "fsl,mpc5121-fec";
+			reg = <0x2800 0x800>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <4 0x8>;
+			interrupt-parent = < &ipic >;
+			phy-handle = < &phy >;
+			fsl,align-tx-packets = <4>;
+		};
+
+		// 5121e has two dr usb modules
+		// mpc5121_ads only uses USB0
+
+		// USB1 using external ULPI PHY
+		//usb@3000 {
+		//	compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr";
+		//	reg = <0x3000 0x1000>;
+		//	#address-cells = <1>;
+		//	#size-cells = <0>;
+		//	interrupt-parent = < &ipic >;
+		//	interrupts = <43 0x8>;
+		//	dr_mode = "otg";
+		//	phy_type = "ulpi";
+		//	port1;
+		//};
+
+		// USB0 using internal UTMI PHY
+		usb@4000 {
+			compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr";
+			reg = <0x4000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = < &ipic >;
+			interrupts = <44 0x8>;
+			dr_mode = "otg";
+			phy_type = "utmi_wide";
+			port0;
+		};
+
+		// IO control
+		ioctl@a000 {
+			compatible = "fsl,mpc5121-ioctl";
+			reg = <0xA000 0x1000>;
+		};
+
+		pata@10200 {
+			compatible = "fsl,mpc5121-pata";
+			reg = <0x10200 0x100>;
+			interrupts = <5 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		// 512x PSCs are not 52xx PSC compatible
 		// PSC3 serial port A aka ttyPSC0
 		serial@11300 {
 			device_type = "serial";
-			compatible = "fsl,mpc5121-psc-uart";
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
 			// Logical port assignment needed until driver
 			// learns to use aliases
 			port-number = <0>;
 			cell-index = <3>;
 			reg = <0x11300 0x100>;
-			interrupts = <0x28 0x8>; // actually the fifo irq
+			interrupts = <40 0x8>;
 			interrupt-parent = < &ipic >;
+			rx-fifo-size = <16>;
+			tx-fifo-size = <16>;
 		};
 
 		// PSC4 serial port B aka ttyPSC1
 		serial@11400 {
 			device_type = "serial";
-			compatible = "fsl,mpc5121-psc-uart";
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
 			// Logical port assignment needed until driver
 			// learns to use aliases
 			port-number = <1>;
 			cell-index = <4>;
 			reg = <0x11400 0x100>;
-			interrupts = <0x28 0x8>; // actually the fifo irq
+			interrupts = <40 0x8>;
 			interrupt-parent = < &ipic >;
+			rx-fifo-size = <16>;
+			tx-fifo-size = <16>;
 		};
 
-		pscsfifo@11f00 {
+		// PSC5 in ac97 mode
+		ac97@11500 {
+			compatible = "fsl,mpc5121-psc-ac97", "fsl,mpc5121-psc";
+			cell-index = <5>;
+			reg = <0x11500 0x100>;
+			interrupts = <40 0x8>;
+			interrupt-parent = < &ipic >;
+			fsl,mode = "ac97-slave";
+			rx-fifo-size = <384>;
+			tx-fifo-size = <384>;
+		};
+
+		pscfifo@11f00 {
 			compatible = "fsl,mpc5121-psc-fifo";
 			reg = <0x11f00 0x100>;
-			interrupts = <0x28 0x8>;
+			interrupts = <40 0x8>;
 			interrupt-parent = < &ipic >;
 		};
+
+		dma@14000 {
+			compatible = "fsl,mpc5121-dma2";
+			reg = <0x14000 0x1800>;
+			interrupts = <65 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+	};
+
+	pci: pci@80008500 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				// IDSEL 0x15 - Slot 1 PCI
+				 0xa800 0x0 0x0 0x1 &cpld_pic 0x0 0x8
+				 0xa800 0x0 0x0 0x2 &cpld_pic 0x1 0x8
+				 0xa800 0x0 0x0 0x3 &cpld_pic 0x2 0x8
+				 0xa800 0x0 0x0 0x4 &cpld_pic 0x3 0x8
+
+				// IDSEL 0x16 - Slot 2 MiniPCI
+				 0xb000 0x0 0x0 0x1 &cpld_pic 0x4 0x8
+				 0xb000 0x0 0x0 0x2 &cpld_pic 0x5 0x8
+
+				// IDSEL 0x17 - Slot 3 MiniPCI
+				 0xb800 0x0 0x0 0x1 &cpld_pic 0x6 0x8
+				 0xb800 0x0 0x0 0x2 &cpld_pic 0x7 0x8
+				>;
+		interrupt-parent = < &ipic >;
+		interrupts = <1 0x8>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+			  0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0x84000000 0x0 0x01000000>;
+		clock-frequency = <0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0x80008500 0x100>;
+		compatible = "fsl,mpc5121-pci";
+		device_type = "pci";
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts
index 4936349b87cd..705c23c14f32 100644
--- a/arch/powerpc/boot/dts/mpc7448hpc2.dts
+++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts
@@ -124,14 +124,12 @@
 		};
 
 	  	mpic: pic@7400 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x7400 0x400>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-                       	big-endian;
 		};
 		pci@1000 {
 			compatible = "tsi108-pci";
diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts
index 46e2da30c3dd..2a1929acaabd 100644
--- a/arch/powerpc/boot/dts/mpc8272ads.dts
+++ b/arch/powerpc/boot/dts/mpc8272ads.dts
@@ -217,6 +217,17 @@
 				linux,network-index = <1>;
 				fsl,cpm-command = <0x16200300>;
 			};
+
+			i2c@11860 {
+				compatible = "fsl,mpc8272-i2c",
+					     "fsl,cpm2-i2c";
+				reg = <0x11860 0x20 0x8afc 0x2>;
+				interrupts = <1 8>;
+				interrupt-parent = <&PIC>;
+				fsl,cpm-command = <0x29600000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 
 		PIC: interrupt-controller@10c00 {
@@ -226,22 +237,15 @@
 			compatible = "fsl,mpc8272-pic", "fsl,cpm2-pic";
 		};
 
-/* May need to remove if on a part without crypto engine */
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "fsl,mpc8272-talitos-sec2",
-			             "fsl,talitos-sec2",
-			             "fsl,talitos",
-			             "talitos";
-			reg = <0x30000 0x10000>;
-			interrupts = <11 8>;
+			compatible = "fsl,sec1.0";
+			reg = <0x40000 0x13000>;
+			interrupts = <47 0x8>;
 			interrupt-parent = <&PIC>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x7e>;
-/* desc mask is for rev1.x, we need runtime fixup for >=2.x */
-			descriptor-types-mask = <0x1010ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x1010415>;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
index e1f0dca8ac39..3664fb584026 100644
--- a/arch/powerpc/boot/dts/mpc8313erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
@@ -144,6 +144,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8313-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
@@ -219,17 +254,14 @@
 		};
 
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
-			reg = <0x30000 0x7000>;
+			compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			/* Rev. 2.2 */
-			num-channels = <1>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000004c>;
-			descriptor-types-mask = <0x0122003f>;
+			fsl,num-channels = <1>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x4c>;
+			fsl,descriptor-types-mask = <0x0122003f>;
 		};
 
 		/* IPIC
diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts
index d7a1ececa30f..f704513fb930 100644
--- a/arch/powerpc/boot/dts/mpc8315erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8315erdb.dts
@@ -132,6 +132,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8315-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -206,17 +241,16 @@
 		};
 
 		crypto@30000 {
-			model = "SEC3";
-			device_type = "crypto";
-			compatible = "talitos";
+			compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
+				     "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+				     "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			/* Rev. 3.0 geometry */
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x000001fe>;
-			descriptor-types-mask = <0x03ab0ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x97c>;
+			fsl,descriptor-types-mask = <0x3ab0abf>;
 		};
 
 		sata@18000 {
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 539e02fb3526..7345743d3d96 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -114,18 +114,50 @@
 			interrupt-parent = <&ipic>;
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
-			reg = <0x30000 0x7000>;
+			compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			/* Rev. 2.2 */
-			num-channels = <1>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000004c>;
-			descriptor-types-mask = <0x0122003f>;
+			fsl,num-channels = <1>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x4c>;
+			fsl,descriptor-types-mask = <0x0122003f>;
 		};
 
 		ipic: pic@700 {
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index 179c81c6a7ac..e74c045a0f8c 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -68,7 +68,7 @@
 			compatible = "fsl-i2c";
 			reg = <0x3000 0x100>;
 			interrupts = <14 0x8>;
-			interrupt-parent = <&pic>;
+			interrupt-parent = <&ipic>;
 			dfsrr;
 		};
 
@@ -79,7 +79,7 @@
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
 			interrupts = <9 0x8>;
-			interrupt-parent = <&pic>;
+			interrupt-parent = <&ipic>;
 		};
 
 		serial1: serial@4600 {
@@ -89,24 +89,56 @@
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
 			interrupts = <10 0x8>;
-			interrupt-parent = <&pic>;
+			interrupt-parent = <&ipic>;
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
 		};
 
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
-			reg = <0x30000 0x7000>;
+			compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
-			interrupt-parent = <&pic>;
-			/* Rev. 2.2 */
-			num-channels = <1>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000004c>;
-			descriptor-types-mask = <0x0122003f>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <1>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x4c>;
+			fsl,descriptor-types-mask = <0x0122003f>;
 		};
 
-		pic:pic@700 {
+		ipic:pic@700 {
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
@@ -240,13 +272,13 @@
 			compatible = "fsl,ucc-mdio";
 
 			phy00:ethernet-phy@00 {
-				interrupt-parent = <&pic>;
+				interrupt-parent = <&ipic>;
 				interrupts = <0>;
 				reg = <0x0>;
 				device_type = "ethernet-phy";
 			};
 			phy04:ethernet-phy@04 {
-				interrupt-parent = <&pic>;
+				interrupt-parent = <&ipic>;
 				interrupts = <0>;
 				reg = <0x4>;
 				device_type = "ethernet-phy";
@@ -261,7 +293,7 @@
 			reg = <0x80 0x80>;
 			big-endian;
 			interrupts = <32 0x8 33 0x8>; //high:32 low:33
-			interrupt-parent = <&pic>;
+			interrupt-parent = <&ipic>;
 		};
 	};
 
@@ -270,21 +302,21 @@
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 				/* IDSEL 0x10 AD16 (USB) */
-				 0x8000 0x0 0x0 0x1 &pic 17 0x8
+				 0x8000 0x0 0x0 0x1 &ipic 17 0x8
 
 				/* IDSEL 0x11 AD17 (Mini1)*/
-				 0x8800 0x0 0x0 0x1 &pic 18 0x8
-				 0x8800 0x0 0x0 0x2 &pic 19 0x8
-				 0x8800 0x0 0x0 0x3 &pic 20 0x8
-				 0x8800 0x0 0x0 0x4 &pic 48 0x8
+				 0x8800 0x0 0x0 0x1 &ipic 18 0x8
+				 0x8800 0x0 0x0 0x2 &ipic 19 0x8
+				 0x8800 0x0 0x0 0x3 &ipic 20 0x8
+				 0x8800 0x0 0x0 0x4 &ipic 48 0x8
 
 				/* IDSEL 0x12 AD18 (PCI/Mini2) */
-				 0x9000 0x0 0x0 0x1 &pic 19 0x8
-				 0x9000 0x0 0x0 0x2 &pic 20 0x8
-				 0x9000 0x0 0x0 0x3 &pic 48 0x8
-				 0x9000 0x0 0x0 0x4 &pic 17 0x8>;
+				 0x9000 0x0 0x0 0x1 &ipic 19 0x8
+				 0x9000 0x0 0x0 0x2 &ipic 20 0x8
+				 0x9000 0x0 0x0 0x3 &ipic 48 0x8
+				 0x9000 0x0 0x0 0x4 &ipic 17 0x8>;
 
-		interrupt-parent = <&pic>;
+		interrupt-parent = <&ipic>;
 		interrupts = <66 0x8>;
 		bus-range = <0x0 0x0>;
 		ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 9426676b0b7d..8dfab5662585 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -93,6 +93,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		usb@22000 {
 			compatible = "fsl-usb2-mph";
 			reg = <0x22000 0x1000>;
@@ -178,16 +213,14 @@
 		};
 
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
+			compatible = "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000007e>;
-			descriptor-types-mask = <0x01010ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
 		};
 
 		ipic: pic@700 {
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
index f81d735e6e72..49ca3497eefb 100644
--- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -91,6 +91,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -151,16 +186,14 @@
 		};
 
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
+			compatible = "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000007e>;
-			descriptor-types-mask = <0x01010ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
 		};
 
 		ipic: pic@700 {
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index 0199c5c548d8..ba586cb7afbb 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -103,6 +103,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		/* phy type (ULPI or SERIAL) are only types supported for MPH */
 		/* port = 0 or 1 */
 		usb@22000 {
@@ -193,20 +228,15 @@
 			interrupt-parent = <&ipic>;
 		};
 
-		/* May need to remove if on a part without crypto engine */
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
+			compatible = "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000007e>;
-			/* desc mask is for rev2.0,
-			 * we need runtime fixup for >2.0 */
-			descriptor-types-mask = <0x01010ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
 		};
 
 		/* IPIC
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 8160ff24e87e..3701dae1ee02 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -118,18 +118,50 @@
 			interrupt-parent = <&ipic>;
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
+			compatible = "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000007e>;
-			/* desc mask is for rev1.x, we need runtime fixup for >=2.x */
-			descriptor-types-mask = <0x01010ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
 		};
 
 		ipic: pic@700 {
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
new file mode 100644
index 000000000000..8acd1d6577f2
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -0,0 +1,432 @@
+/*
+ * MPC8360E RDK Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2007-2008 MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,mpc8360rdk";
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8360@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			/* filled by u-boot */
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		/* filled by u-boot */
+		reg = <0 0>;
+	};
+
+	soc@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8360-immr", "fsl,immr", "fsl,soc",
+			     "simple-bus";
+		ranges = <0 0xe0000000 0x200000>;
+		reg = <0xe0000000 0x200>;
+		/* filled by u-boot */
+		bus-frequency = <0>;
+
+		wdt@200 {
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <16 8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			interrupts = <9 8>;
+			interrupt-parent = <&ipic>;
+			/* filled by u-boot */
+			clock-frequency = <0>;
+		};
+
+		serial1: serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			interrupts = <10 8>;
+			interrupt-parent = <&ipic>;
+			/* filled by u-boot */
+			clock-frequency = <0>;
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec2-crypto";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 8>;
+			interrupt-parent = <&ipic>;
+			num-channels = <4>;
+			channel-fifo-len = <24>;
+			exec-units-mask = <0x7e>;
+			/*
+			 * desc mask is for rev1.x, we need runtime fixup
+			 * for >=2.x
+			 */
+			descriptor-types-mask = <0x1010ebf>;
+		};
+
+		ipic: interrupt-controller@700 {
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			compatible = "fsl,pq2pro-pic", "fsl,ipic";
+			interrupt-controller;
+			reg = <0x700 0x100>;
+		};
+
+		qe_pio_b: gpio-controller@1418 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8360-qe-pario-bank",
+				     "fsl,mpc8323-qe-pario-bank";
+			reg = <0x1418 0x18>;
+			gpio-controller;
+		};
+
+		qe_pio_e: gpio-controller@1460 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8360-qe-pario-bank",
+				     "fsl,mpc8323-qe-pario-bank";
+			reg = <0x1460 0x18>;
+			gpio-controller;
+		};
+
+		qe@100000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			device_type = "qe";
+			compatible = "fsl,qe", "simple-bus";
+			ranges = <0 0x100000 0x100000>;
+			reg = <0x100000 0x480>;
+			/* filled by u-boot */
+			clock-frequency = <0>;
+			bus-frequency = <0>;
+			brg-frequency = <0>;
+
+			muram@10000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,qe-muram", "fsl,cpm-muram";
+				ranges = <0 0x10000 0xc000>;
+
+				data-only@0 {
+					compatible = "fsl,qe-muram-data",
+						     "fsl,cpm-muram-data";
+					reg = <0 0xc000>;
+				};
+			};
+
+			timer@440 {
+				compatible = "fsl,mpc8360-qe-gtm",
+					     "fsl,qe-gtm", "fsl,gtm";
+				reg = <0x440 0x40>;
+				interrupts = <12 13 14 15>;
+				interrupt-parent = <&qeic>;
+				/* filled by u-boot */
+				clock-frequency = <0>;
+			};
+
+			spi@4c0 {
+				cell-index = <0>;
+				compatible = "fsl,spi";
+				reg = <0x4c0 0x40>;
+				interrupts = <2>;
+				interrupt-parent = <&qeic>;
+				mode = "cpu-qe";
+			};
+
+			spi@500 {
+				cell-index = <1>;
+				compatible = "fsl,spi";
+				reg = <0x500 0x40>;
+				interrupts = <1>;
+				interrupt-parent = <&qeic>;
+				mode = "cpu-qe";
+			};
+
+			enet0: ucc@2000 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <1>;
+				reg = <0x2000 0x200>;
+				interrupts = <32>;
+				interrupt-parent = <&qeic>;
+				rx-clock-name = "none";
+				tx-clock-name = "clk9";
+				phy-handle = <&phy2>;
+				phy-connection-type = "rgmii-rxid";
+				/* filled by u-boot */
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			enet1: ucc@3000 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <2>;
+				reg = <0x3000 0x200>;
+				interrupts = <33>;
+				interrupt-parent = <&qeic>;
+				rx-clock-name = "none";
+				tx-clock-name = "clk4";
+				phy-handle = <&phy4>;
+				phy-connection-type = "rgmii-rxid";
+				/* filled by u-boot */
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			enet2: ucc@2600 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <7>;
+				reg = <0x2600 0x200>;
+				interrupts = <42>;
+				interrupt-parent = <&qeic>;
+				rx-clock-name = "clk20";
+				tx-clock-name = "clk19";
+				phy-handle = <&phy1>;
+				phy-connection-type = "mii";
+				/* filled by u-boot */
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			enet3: ucc@3200 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <4>;
+				reg = <0x3200 0x200>;
+				interrupts = <35>;
+				interrupt-parent = <&qeic>;
+				rx-clock-name = "clk8";
+				tx-clock-name = "clk7";
+				phy-handle = <&phy3>;
+				phy-connection-type = "mii";
+				/* filled by u-boot */
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			mdio@2120 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,ucc-mdio";
+				reg = <0x2120 0x18>;
+
+				phy1: ethernet-phy@1 {
+					device_type = "ethernet-phy";
+					compatible = "national,DP83848VV";
+					reg = <1>;
+				};
+
+				phy2: ethernet-phy@2 {
+					device_type = "ethernet-phy";
+					compatible = "broadcom,BCM5481UA2KMLG";
+					reg = <2>;
+				};
+
+				phy3: ethernet-phy@3 {
+					device_type = "ethernet-phy";
+					compatible = "national,DP83848VV";
+					reg = <3>;
+				};
+
+				phy4: ethernet-phy@4 {
+					device_type = "ethernet-phy";
+					compatible = "broadcom,BCM5481UA2KMLG";
+					reg = <4>;
+				};
+			};
+
+			serial2: ucc@2400 {
+				device_type = "serial";
+				compatible = "ucc_uart";
+				reg = <0x2400 0x200>;
+				cell-index = <5>;
+				port-number = <0>;
+				rx-clock-name = "brg7";
+				tx-clock-name = "brg8";
+				interrupts = <40>;
+				interrupt-parent = <&qeic>;
+				soft-uart;
+			};
+
+			serial3: ucc@3400 {
+				device_type = "serial";
+				compatible = "ucc_uart";
+				reg = <0x3400 0x200>;
+				cell-index = <6>;
+				port-number = <1>;
+				rx-clock-name = "brg13";
+				tx-clock-name = "brg14";
+				interrupts = <41>;
+				interrupt-parent = <&qeic>;
+				soft-uart;
+			};
+
+			qeic: interrupt-controller@80 {
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				compatible = "fsl,qe-ic";
+				interrupt-controller;
+				reg = <0x80 0x80>;
+				big-endian;
+				interrupts = <32 8 33 8>;
+				interrupt-parent = <&ipic>;
+			};
+		};
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
+			     "simple-bus";
+		reg = <0xe0005000 0xd8>;
+		ranges = <0 0 0xff800000 0x0800000
+			  1 0 0x60000000 0x0001000
+			  2 0 0x70000000 0x4000000>;
+
+		flash@0,0 {
+			compatible = "intel,PC28F640P30T85", "cfi-flash";
+			reg = <0 0 0x800000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		display@2,0 {
+			device_type = "display";
+			compatible = "fujitsu,MB86277", "fujitsu,mint";
+			reg = <2 0 0x4000000>;
+			fujitsu,sh3;
+			little-endian;
+			/* filled by u-boot */
+			address = <0>;
+			depth = <0>;
+			width = <0>;
+			height = <0>;
+			linebytes = <0>;
+			/* linux,opened; - added by uboot */
+		};
+	};
+
+	pci0: pci@e0008500 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8360-pci", "fsl,mpc8349-pci";
+		reg = <0xe0008500 0x100>;
+		ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
+			  0x42000000 0 0x80000000 0x80000000 0 0x10000000
+			  0x01000000 0 0xe0300000 0xe0300000 0 0x00100000>;
+		interrupts = <66 8>;
+		interrupt-parent = <&ipic>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = </* miniPCI0 IDSEL 0x14 AD20 */
+				 0xa000 0 0 1 &ipic 18 8
+				 0xa000 0 0 2 &ipic 19 8
+
+				 /* PCI1 IDSEL 0x15 AD21 */
+				 0xa800 0 0 1 &ipic 19 8
+				 0xa800 0 0 2 &ipic 20 8
+				 0xa800 0 0 3 &ipic 21 8
+				 0xa800 0 0 4 &ipic 18 8>;
+		/* filled by u-boot */
+		bus-range = <0 0>;
+		clock-frequency = <0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index fea592574004..0a700cb5f611 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -233,41 +233,6 @@
 			interrupt-parent = <&ipic>;
 		};
 
-		crypto@30000 {
-			model = "SEC3";
-			compatible = "talitos";
-			reg = <0x30000 0x10000>;
-			interrupts = <11 0x8>;
-			interrupt-parent = <&ipic>;
-			/* Rev. 3.0 geometry */
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x000001fe>;
-			descriptor-types-mask = <0x03ab0ebf>;
-		};
-
-		sdhc@2e000 {
-			model = "eSDHC";
-			compatible = "fsl,esdhc";
-			reg = <0x2e000 0x1000>;
-			interrupts = <42 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		sata@18000 {
-			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
-			reg = <0x18000 0x1000>;
-			interrupts = <44 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		sata@19000 {
-			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
-			reg = <0x19000 0x1000>;
-			interrupts = <45 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
 		dma@82a8 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -303,6 +268,40 @@
 			};
 		};
 
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		sdhc@2e000 {
+			model = "eSDHC";
+			compatible = "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <42 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		sata@18000 {
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
+			reg = <0x18000 0x1000>;
+			interrupts = <44 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		sata@19000 {
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
+			reg = <0x19000 0x1000>;
+			interrupts = <45 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
 		/* IPIC
 		 * interrupts cell = <intr #, sense>
 		 * sense values match linux IORESOURCE_IRQ_* defines:
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index f3083c779b66..ed137aa83d5f 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -143,6 +143,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -213,17 +248,15 @@
 		};
 
 		crypto@30000 {
-			model = "SEC3";
-			device_type = "crypto";
-			compatible = "talitos";
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			/* Rev. 3.0 geometry */
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x000001fe>;
-			descriptor-types-mask = <0x03ab0ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
 		};
 
 		sata@18000 {
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
index 1d6ea080ad73..29c8c76a58f7 100644
--- a/arch/powerpc/boot/dts/mpc8378_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
@@ -157,6 +157,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8378-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -234,16 +269,15 @@
 		};
 
 		crypto@30000 {
-			model = "SEC3";
-			compatible = "talitos";
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			/* Rev. 3.0 geometry */
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x000001fe>;
-			descriptor-types-mask = <0x03ab0ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
 		};
 
 		sdhc@2e000 {
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 0e872a60e091..34a7f2f935e1 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -143,6 +143,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8378-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -213,17 +248,15 @@
 		};
 
 		crypto@30000 {
-			model = "SEC3";
-			device_type = "crypto";
-			compatible = "talitos";
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			/* Rev. 3.0 geometry */
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x000001fe>;
-			descriptor-types-mask = <0x03ab0ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
 		};
 
 		/* IPIC
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
index 6f78a9fd9826..d641a8985ea3 100644
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -157,6 +157,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8379-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -234,16 +269,15 @@
 		};
 
 		crypto@30000 {
-			model = "SEC3";
-			compatible = "talitos";
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			/* Rev. 3.0 geometry */
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x000001fe>;
-			descriptor-types-mask = <0x03ab0ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
 		};
 
 		sdhc@2e000 {
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index 1eb8defaff6f..e4d7030d50e5 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -143,6 +143,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8379-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -213,17 +248,15 @@
 		};
 
 		crypto@30000 {
-			model = "SEC3";
-			device_type = "crypto";
-			compatible = "talitos";
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			/* Rev. 3.0 geometry */
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x000001fe>;
-			descriptor-types-mask = <0x03ab0ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
 		};
 
 		sata@18000 {
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
new file mode 100644
index 000000000000..02cfa24a1695
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -0,0 +1,432 @@
+/*
+ * MPC8536 DS Device Tree Source
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "fsl,mpc8536ds";
+	compatible = "fsl,mpc8536ds";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		pci3 = &pci3;
+	};
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8536@0 {
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <00000000 00000000>;	// Filled by U-Boot
+	};
+
+	soc@ffe00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xffe00000 0x100000>;
+		reg = <0xffe00000 0x1000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8536-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 0x2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8536-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <16 0x2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 0x2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 0x2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+			};
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8536-dma", "fsl,eloplus-dma";
+			reg = <0x21300 4>;
+			ranges = <0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8536-dma-channel",
+					     "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <14 0x2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8536-dma-channel",
+					     "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <15 0x2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8536-dma-channel",
+					     "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <16 0x2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8536-dma-channel",
+					     "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <17 0x2>;
+			};
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <0x24520 0x20>;
+
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <10 0x1>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
+				interrupts = <10 0x1>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		usb@22000 {
+			compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+			reg = <0x22000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&mpic>;
+			interrupts = <28 0x2>;
+			phy_type = "ulpi";
+		};
+
+		usb@23000 {
+			compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&mpic>;
+			interrupts = <46 0x2>;
+			phy_type = "ulpi";
+		};
+
+		enet0: ethernet@24000 {
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		enet1: ethernet@26000 {
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		usb@2b000 {
+			compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
+			reg = <0x2b000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&mpic>;
+			interrupts = <60 0x2>;
+			dr_mode = "peripheral";
+			phy_type = "ulpi";
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		sata@18000 {
+			compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+			reg = <0x18000 0x1000>;
+			cell-index = <1>;
+			interrupts = <74 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		sata@19000 {
+			compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+			reg = <0x19000 0x1000>;
+			cell-index = <2>;
+			interrupts = <41 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,mpc8548-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		mpic: pic@40000 {
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+			big-endian;
+		};
+
+		msi@41600 {
+			compatible = "fsl,mpc8536-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+	};
+
+	pci0: pci@ffe08000 {
+		cell-index = <0>;
+		compatible = "fsl,mpc8540-pci";
+		device_type = "pci";
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x11 J17 Slot 1 */
+			0x8800 0 0 1 &mpic 1 1
+			0x8800 0 0 2 &mpic 2 1
+			0x8800 0 0 3 &mpic 3 1
+			0x8800 0 0 4 &mpic 4 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 0x2>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xffc00000 0 0x00010000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xffe08000 0x1000>;
+	};
+
+	pci1: pcie@ffe09000 {
+		cell-index = <1>;
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xffe09000 0x1000>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0x98000000 0x98000000 0 0x08000000
+			  0x01000000 0 0x00000000 0xffc20000 0 0x00010000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 0x2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 4 1
+			0000 0 0 2 &mpic 5 1
+			0000 0 0 3 &mpic 6 1
+			0000 0 0 4 &mpic 7 1
+			>;
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0x98000000
+				  0x02000000 0 0x98000000
+				  0 0x08000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe0a000 {
+		cell-index = <2>;
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xffe0a000 0x1000>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0x90000000 0x90000000 0 0x08000000
+			  0x01000000 0 0x00000000 0xffc10000 0 0x00010000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <26 0x2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 0 1
+			0000 0 0 2 &mpic 1 1
+			0000 0 0 3 &mpic 2 1
+			0000 0 0 4 &mpic 3 1
+			>;
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0x90000000
+				  0x02000000 0 0x90000000
+				  0 0x08000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe0b000 {
+		cell-index = <3>;
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xffe0b000 0x1000>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xffc30000 0 0x00010000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <27 0x2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 8 1
+			0000 0 0 2 &mpic 9 1
+			0000 0 0 3 &mpic 10 1
+			0000 0 0 4 &mpic 11 1
+			>;
+
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0xa0000000
+				  0x02000000 0 0xa0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00100000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
index 18033ed0b535..f2273a872b11 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -40,6 +40,7 @@
 			timebase-frequency = <0>;	//  33 MHz, from uboot
 			bus-frequency = <0>;	// 166 MHz
 			clock-frequency = <0>;	// 825 MHz, from uboot
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -63,7 +64,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
@@ -83,6 +84,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -165,14 +207,12 @@
 			interrupt-parent = <&mpic>;
 		};
 		mpic: pic@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-			big-endian;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
index 663c7c50ca45..c4469f19ff82 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -40,6 +40,7 @@
 			timebase-frequency = <0>;	//  33 MHz, from uboot
 			bus-frequency = <0>;	// 166 MHz
 			clock-frequency = <0>;	// 825 MHz, from uboot
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -63,7 +64,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8541-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
@@ -83,6 +84,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8541-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -147,15 +189,24 @@
 			interrupt-parent = <&mpic>;
 		};
 
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
 		mpic: pic@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-                        big-endian;
 		};
 
 		cpm@919c0 {
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index 6a0d8db96d97..7d3829d3495e 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -41,6 +41,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -65,7 +66,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8544-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
@@ -209,15 +210,40 @@
 			fsl,has-rstcr;
 		};
 
+		crypto@30000 {
+			compatible = "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xfe>;
+			fsl,descriptor-types-mask = <0x12b0ebf>;
+		};
+
 		mpic: pic@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-			big-endian;
+		};
+
+		msi@41600 {
+			compatible = "fsl,mpc8544-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index 4811b8107415..d84466bb7eca 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -45,6 +45,7 @@
 			timebase-frequency = <0>;	//  33 MHz, from uboot
 			bus-frequency = <0>;	// 166 MHz
 			clock-frequency = <0>;	// 825 MHz, from uboot
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -68,7 +69,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8548-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
@@ -99,6 +100,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -207,15 +249,24 @@
 			fsl,has-rstcr;
 		};
 
+		crypto@30000 {
+			compatible = "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xfe>;
+			fsl,descriptor-types-mask = <0x12b0ebf>;
+		};
+
 		mpic: pic@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-                        big-endian;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index b025c566c10d..e03a78006283 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -40,6 +40,7 @@
 			timebase-frequency = <0>;	//  33 MHz, from uboot
 			bus-frequency = <0>;	// 166 MHz
 			clock-frequency = <0>;	// 825 MHz, from uboot
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -63,7 +64,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8555-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
@@ -83,6 +84,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -147,15 +189,24 @@
 			interrupt-parent = <&mpic>;
 		};
 
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
 		mpic: pic@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-                        big-endian;
 		};
 
 		cpm@919c0 {
diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts
index 0cc16ab305d1..ba8159de040b 100644
--- a/arch/powerpc/boot/dts/mpc8560ads.dts
+++ b/arch/powerpc/boot/dts/mpc8560ads.dts
@@ -64,7 +64,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
@@ -73,6 +73,47 @@
 			interrupts = <16 2>;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -134,6 +175,7 @@
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
 			device_type = "open-pic";
 		};
 
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index a025a8ededc5..9c30a34821dc 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -42,6 +42,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -70,7 +71,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8568-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
@@ -106,6 +107,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8568-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8568-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8568-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8568-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8568-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -189,27 +231,23 @@
 		};
 
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
-			reg = <0x30000 0xf000>;
+			compatible = "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
 			interrupts = <45 2>;
 			interrupt-parent = <&mpic>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0xfe>;
-			descriptor-types-mask = <0x12b0ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xfe>;
+			fsl,descriptor-types-mask = <0x12b0ebf>;
 		};
 
 		mpic: pic@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-                        big-endian;
 		};
 
 		par_io@e0100 {
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index 66f27ab613a2..08c61e3daecc 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -42,6 +42,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 
 		PowerPC,8572@1 {
@@ -54,6 +55,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -84,7 +86,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,mpc8572-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
@@ -115,6 +117,88 @@
 			dfsrr;
 		};
 
+		dma@c300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+			reg = <0xc300 0x4>;
+			ranges = <0x0 0xc100 0x200>;
+			cell-index = <1>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <76 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <77 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <78 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <79 2>;
+			};
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -221,15 +305,41 @@
 			fsl,has-rstcr;
 		};
 
+		msi@41600 {
+			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
 		mpic: pic@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-			big-endian;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index fa9b6bbeb5af..981941e5d7a5 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -172,14 +172,28 @@
 		};
 
 		mpic: interrupt-controller@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-			big-endian;
+		};
+
+		msi@41600 {
+			compatible = "fsl,mpc8610-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
 		};
 
 		global-utilities@e0000 {
@@ -349,7 +363,7 @@
 			0xe000 0 0 4 &mpic 1 1
 
 			/* IDSEL 0x1f */
-			0xf800 0 0 1 &mpic 3 0
+			0xf800 0 0 1 &mpic 3 2
 			0xf800 0 0 2 &mpic 0 1
 		>;
 
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index 1e4bfe9cadb9..ae08761ffff1 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -134,6 +134,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -239,14 +280,12 @@
 		};
 
 		mpic: pic@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-			big-endian;
 		};
 
 		global-utilities@e0000 {
diff --git a/arch/powerpc/boot/dts/mpc866ads.dts b/arch/powerpc/boot/dts/mpc866ads.dts
index 765e43c997da..bd700651f360 100644
--- a/arch/powerpc/boot/dts/mpc866ads.dts
+++ b/arch/powerpc/boot/dts/mpc866ads.dts
@@ -171,6 +171,17 @@
 				fsl,cpm-command = <0000>;
 				linux,network-index = <1>;
 			};
+
+			i2c@860 {
+				compatible = "fsl,mpc866-i2c",
+					     "fsl,cpm1-i2c";
+				reg = <0x860 0x20 0x3c80 0x30>;
+				interrupts = <16>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-command = <0x10>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts
index 9895043722b9..b123e9f7a5a8 100644
--- a/arch/powerpc/boot/dts/mpc885ads.dts
+++ b/arch/powerpc/boot/dts/mpc885ads.dts
@@ -215,6 +215,17 @@
 				fsl,cpm-command = <0x80>;
 				linux,network-index = <2>;
 			};
+
+			i2c@860 {
+				compatible = "fsl,mpc885-i2c",
+					     "fsl,cpm1-i2c";
+				reg = <0x860 0x20 0x3c80 0x30>;
+				interrupts = <16>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-command = <0x10>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/ps3.dts b/arch/powerpc/boot/dts/ps3.dts
index 379ded282d5e..96ba5b512afe 100644
--- a/arch/powerpc/boot/dts/ps3.dts
+++ b/arch/powerpc/boot/dts/ps3.dts
@@ -18,6 +18,8 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+/dts-v1/;
+
 / {
 	model = "SonyPS3";
 	compatible = "sony,ps3";
@@ -34,7 +36,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0 0>;
+		reg = <0x00000000 0x00000000 0x00000000 0x00000000>;
 	};
 
 	/*
@@ -55,14 +57,14 @@
 
 		cpu@0 {
 			device_type = "cpu";
-			reg = <0>;
-			ibm,ppc-interrupt-server#s = <0 1>;
+			reg = <0x00000000>;
+			ibm,ppc-interrupt-server#s = <0x0 0x1>;
 			clock-frequency = <0>;
 			timebase-frequency = <0>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
-			i-cache-line-size = <80>;
-			d-cache-line-size = <80>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			i-cache-line-size = <128>;
+			d-cache-line-size = <128>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/rainier.dts b/arch/powerpc/boot/dts/rainier.dts
index 6a8fa7089ea2..9684c80e4093 100644
--- a/arch/powerpc/boot/dts/rainier.dts
+++ b/arch/powerpc/boot/dts/rainier.dts
@@ -12,12 +12,14 @@
  *
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,rainier";
 	compatible = "amcc,rainier";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -35,13 +37,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440GRx";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by zImage */
 			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -49,14 +51,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by zImage */
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-440grx","ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -66,11 +68,11 @@
 		compatible = "ibm,uic-440grx","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -78,22 +80,22 @@
 		compatible = "ibm,uic-440grx","ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
-		dcr-reg = <0e0 009>;
+		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1c 4 1d 4>; /* cascade */
+		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	SDR0: sdr {
 		compatible = "ibm,sdr-440grx", "ibm,sdr-440ep";
-		dcr-reg = <00e 002>;
+		dcr-reg = <0x00e 0x002>;
 	};
 
 	CPR0: cpr {
 		compatible = "ibm,cpr-440grx", "ibm,cpr-440ep";
-		dcr-reg = <00c 002>;
+		dcr-reg = <0x00c 0x002>;
 	};
 
 	plb {
@@ -105,80 +107,80 @@
 
 		SDRAM0: sdram {
 			compatible = "ibm,sdram-440grx", "ibm,sdram-44x-ddr2denali";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		DMA0: dma {
 			compatible = "ibm,dma-440grx", "ibm,dma-4xx";
-			dcr-reg = <100 027>;
+			dcr-reg = <0x100 0x027>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440grx", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <2>;
 			num-rx-chans = <2>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					/*RXEOB*/ 1 &UIC0 b 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
-			interrupt-map-mask = <ffffffff>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
 		};
 
 		POB0: opb {
 		  	compatible = "ibm,opb-440grx", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-		  	ranges = <00000000 1 00000000 80000000
-			          80000000 1 80000000 80000000>;
+		  	ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+			          0x80000000 0x00000001 0x80000000 0x80000000>;
 		  	interrupt-parent = <&UIC1>;
-		  	interrupts = <7 4>;
+		  	interrupts = <0x7 0x4>;
 		  	clock-frequency = <0>; /* Filled in by zImage */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440grx", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 
 				nor_flash@0,0 {
 					compatible = "amd,s29gl256n", "cfi-flash";
 					bank-width = <2>;
-					reg = <0 000000 4000000>;
+					reg = <0x00000000 0x00000000 0x04000000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "Kernel";
-						reg = <0 180000>;
+						reg = <0x00000000 0x00180000>;
 					};
 					partition@180000 {
 						label = "ramdisk";
-						reg = <180000 200000>;
+						reg = <0x00180000 0x00200000>;
 					};
 					partition@380000 {
 						label = "file system";
-						reg = <380000 3aa0000>;
+						reg = <0x00380000 0x03aa0000>;
 					};
 					partition@3e20000 {
 						label = "kozio";
-						reg = <3e20000 140000>;
+						reg = <0x03e20000 0x00140000>;
 					};
 					partition@3f60000 {
 						label = "env";
-						reg = <3f60000 40000>;
+						reg = <0x03f60000 0x00040000>;
 					};
 					partition@3fa0000 {
 						label = "u-boot";
-						reg = <3fa0000 60000>;
+						reg = <0x03fa0000 0x00060000>;
 					};
 				};
 
@@ -187,69 +189,69 @@
 			UART0: serial@ef600300 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600300 8>;
-		   		virtual-reg = <ef600300>;
+		   		reg = <0xef600300 0x00000008>;
+		   		virtual-reg = <0xef600300>;
 		   		clock-frequency = <0>; /* Filled in by zImage */
-		   		current-speed = <1c200>;
+		   		current-speed = <115200>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <0 4>;
+		   		interrupts = <0x0 0x4>;
 	   		};
 
 			UART1: serial@ef600400 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600400 8>;
-		   		virtual-reg = <ef600400>;
+		   		reg = <0xef600400 0x00000008>;
+		   		virtual-reg = <0xef600400>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <1 4>;
+		   		interrupts = <0x1 0x4>;
 	   		};
 
 			UART2: serial@ef600500 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600500 8>;
-		   		virtual-reg = <ef600500>;
+		   		reg = <0xef600500 0x00000008>;
+		   		virtual-reg = <0xef600500>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC1>;
-		   		interrupts = <3 4>;
+		   		interrupts = <0x3 0x4>;
 	   		};
 
 			UART3: serial@ef600600 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600600 8>;
-		   		virtual-reg = <ef600600>;
+		   		reg = <0xef600600 0x00000008>;
+		   		virtual-reg = <0xef600600>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC1>;
-		   		interrupts = <4 4>;
+		   		interrupts = <0x4 0x4>;
 	   		};
 
 			IIC0: i2c@ef600700 {
 				compatible = "ibm,iic-440grx", "ibm,iic";
-				reg = <ef600700 14>;
+				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600800 {
 				compatible = "ibm,iic-440grx", "ibm,iic";
-				reg = <ef600800 14>;
+				reg = <0xef600800 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <7 4>;
+				interrupts = <0x7 0x4>;
 			};
 
 			ZMII0: emac-zmii@ef600d00 {
 				compatible = "ibm,zmii-440grx", "ibm,zmii";
-				reg = <ef600d00 c>;
+				reg = <0xef600d00 0x0000000c>;
 			};
 
 			RGMII0: emac-rgmii@ef601000 {
 				compatible = "ibm,rgmii-440grx", "ibm,rgmii";
-				reg = <ef601000 8>;
+				reg = <0xef601000 0x00000008>;
 				has-mdio;
 			};
 
@@ -257,23 +259,23 @@
 				device_type = "network";
 				compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
 				interrupt-parent = <&EMAC0>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 18 4
-						/*Wake*/  1 &UIC1 1d 4>;
-				reg = <ef600e00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
+				reg = <0xef600e00 0x00000074>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <0>;
 				rgmii-device = <&RGMII0>;
@@ -286,23 +288,23 @@
 				device_type = "network";
 				compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
 				interrupt-parent = <&EMAC1>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 19 4
-						/*Wake*/  1 &UIC1 1f 4>;
-				reg = <ef600f00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+						/*Wake*/  0x1 &UIC1 0x1f 0x4>;
+				reg = <0xef600f00 0x00000074>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <1>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <1>;
 				rgmii-device = <&RGMII0>;
@@ -319,24 +321,25 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb440grx-pci", "ibm,plb-pci";
 			primary;
-			reg = <1 eec00000 8	/* Config space access */
-			       1 eed00000 4	/* IACK */
-			       1 eed00000 4	/* Special cycle */
-			       1 ef400000 40>;	/* Internal registers */
+			reg = <0x00000001 0xeec00000 0x00000008	/* Config space access */
+			       0x00000001 0xeed00000 0x00000004	/* IACK */
+			       0x00000001 0xeed00000 0x00000004	/* Special cycle */
+			       0x00000001 0xef400000 0x00000040>;	/* Internal registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed. Chip supports a second
 			 * IO range but we don't use it for now
 			 */
-			ranges = <02000000 0 80000000 1 80000000 0 10000000
-				01000000 0 00000000 1 e8000000 0 00100000>;
+			ranges = <0x02000000 0x0 0x80000000 0x1 0x80000000 0x0 0x40000000
+				0x01000000 0x0 0x00000000 0x1 0xe8000000 0x0 0x00010000
+				0x01000000 0x0 0x00000000 0x1 0xe8800000 0x0 0x03800000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* All PCI interrupts are routed to IRQ 67 */
-			interrupt-map-mask = <0000 0 0 0>;
-			interrupt-map = < 0000 0 0 0 &UIC2 3 8 >;
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = < 0x0 0x0 0x0 0x0 &UIC2 0x3 0x8 >;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/sam440ep.dts b/arch/powerpc/boot/dts/sam440ep.dts
new file mode 100644
index 000000000000..f0663be10421
--- /dev/null
+++ b/arch/powerpc/boot/dts/sam440ep.dts
@@ -0,0 +1,293 @@
+/*
+ * Device Tree Source for ACube Sam440ep  based off bamboo.dts code 
+ * original copyrights below 
+ *
+ * Copyright (c) 2006, 2007 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * Modified from bamboo.dts for sam440ep:
+ * Copyright 2008 Giuseppe Coviello <gicoviello@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "acube,sam440ep";
+	compatible = "acube,sam440ep";
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+		serial2 = &UART2;
+		serial3 = &UART3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440EP";
+			reg = <0>;
+			clock-frequency = <0>; /* Filled in by zImage */
+			timebase-frequency = <0>; /* Filled in by zImage */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0>; /* Filled in by zImage */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440ep","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 9>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440ep","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 9>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 4 0x1f 4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-440ep";
+		dcr-reg = <0x00e 2>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-440ep";
+		dcr-reg = <0x00c 2>;
+	};
+
+	plb {
+		compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by zImage */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
+			dcr-reg = <0x010 2>;
+		};
+
+		DMA0: dma {
+			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
+			dcr-reg = <0x100 0x027>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <4>;
+			num-rx-chans = <2>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0 1 2 3 4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0 &UIC0 10 4
+					/*RXEOB*/ 1 &UIC0 11 4
+					/*SERR*/  2 &UIC1 0 4
+					/*TXDE*/  3 &UIC1 1 4
+					/*RXDE*/  4 &UIC1 2 4>;
+		};
+
+		POB0: opb {
+		  	compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Bamboo is oddball in the 44x world and doesn't use the ERPN
+			 * bits.
+			 */
+		  	ranges = <0x00000000 0 0x00000000 0x80000000
+			          0x80000000 0 0x80000000 0x80000000>;
+		  	interrupt-parent = <&UIC1>;
+		  	interrupts = <7 4>;
+		  	clock-frequency = <0>; /* Filled in by zImage */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
+				dcr-reg = <0x012 2>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				interrupts = <5 1>;
+				interrupt-parent = <&UIC1>;
+			};
+
+			UART0: serial@ef600300 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600300 8>;
+		   		virtual-reg = <0xef600300>;
+		   		clock-frequency = <0>; /* Filled in by zImage */
+		   		current-speed = <0x1c200>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <0 4>;
+	   		};
+
+			UART1: serial@ef600400 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600400 8>;
+		   		virtual-reg = <0xef600400>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <1 4>;
+	   		};
+
+			UART2: serial@ef600500 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600500 8>;
+		   		virtual-reg = <0xef600500>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <3 4>;
+	   		};
+
+			UART3: serial@ef600600 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600600 8>;
+		   		virtual-reg = <0xef600600>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <4 4>;
+	   		};
+
+			IIC0: i2c@ef600700 {
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+				index = <0>;
+				reg = <0xef600700 0x14>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <2 4>;
+				rtc@68 {
+					compatible = "stm,m41t80";
+					reg = <0x68>;
+				};
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+				index = <5>;
+				reg = <0xef600800 0x14>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <7 4>;
+			};
+
+			ZMII0: emac-zmii@ef600d00 {
+				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
+				reg = <0xef600d00 0xc>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				linux,network-index = <0>;
+				device_type = "network";
+				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1c 4 0x1d 4>;
+				reg = <0xef600e00 0x70>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0 1>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <0x5dc>;
+				rx-fifo-size = <0x1000>;
+				tx-fifo-size = <0x800>;
+				phy-mode = "rmii";
+				phy-map = <00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <0>;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				linux,network-index = <1>;
+				device_type = "network";
+				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1e 4 0x1f 4>;
+				reg = <0xef600f00 0x70>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <2 3>;
+				mal-rx-channel = <1>;
+				cell-index = <1>;
+				max-frame-size = <0x5dc>;
+				rx-fifo-size = <0x1000>;
+				tx-fifo-size = <0x800>;
+				phy-mode = "rmii";
+				phy-map = <00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <1>;
+			};
+			usb@ef601000 {
+				compatible = "ohci-be";
+				reg = <0xef601000 0x80>;
+				interrupts = <8 4 9 4>;
+				interrupt-parent = <&UIC1>;
+			};	
+		};
+
+		PCI0: pci@ec000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
+			primary;
+			reg = <0 0xeec00000 8	   /* Config space access */
+			       0 0xeed00000 4	   /* IACK */
+			       0 0xeed00000 4	   /* Special cycle */
+			       0 0xef400000 0x40>; /* Internal registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed. Chip supports a second
+			 * IO range but we don't use it for now
+			 */
+			ranges = <0x02000000 0 0xa0000000 0 0xa0000000 0 0x20000000
+				  0x01000000 0 0x00000000 0 0xe8000000 0 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0 0 0 0 0 0x80000000>;
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@ef600300";
+	};
+};
diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts
index 3839d4b7d6a7..45f789b56709 100644
--- a/arch/powerpc/boot/dts/sbc8349.dts
+++ b/arch/powerpc/boot/dts/sbc8349.dts
@@ -95,6 +95,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		/* phy type (ULPI or SERIAL) are only types supported for MPH */
 		/* port = 0 or 1 */
 		usb@22000 {
@@ -186,19 +221,15 @@
 			interrupt-parent = <&ipic>;
 		};
 
-		/* May need to remove if on a part without crypto engine */
 		crypto@30000 {
-			model = "SEC2";
-			compatible = "talitos";
+			compatible = "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000007e>;
-			/* desc mask is for rev2.0,
-			 * we need runtime fixup for >2.0 */
-			descriptor-types-mask = <0x01010ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
 		};
 
 		/* IPIC
diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts
index 22d967178fe9..333552b4e90d 100644
--- a/arch/powerpc/boot/dts/sbc8548.dts
+++ b/arch/powerpc/boot/dts/sbc8548.dts
@@ -44,6 +44,7 @@
 			timebase-frequency = <0>;	// From uboot
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -161,7 +162,7 @@
 			interrupts = <0x12 0x2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8548-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <0x20>;	// 32 bytes
@@ -192,6 +193,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -262,15 +304,24 @@
 			fsl,has-rstcr;
 		};
 
+		crypto@30000 {
+			compatible = "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xfe>;
+			fsl,descriptor-types-mask = <0x12b0ebf>;
+		};
+
 		mpic: pic@40000 {
 			interrupt-controller;
 			#address-cells = <0>;
-			#size-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-                        big-endian;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/sbc8560.dts b/arch/powerpc/boot/dts/sbc8560.dts
index 0476802fba60..db3632ef9888 100644
--- a/arch/powerpc/boot/dts/sbc8560.dts
+++ b/arch/powerpc/boot/dts/sbc8560.dts
@@ -43,6 +43,7 @@
 			timebase-frequency = <0>;	// From uboot
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -66,7 +67,7 @@
 			interrupts = <0x12 0x2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8560-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <0x20>;	// 32 bytes
@@ -97,6 +98,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -155,8 +197,8 @@
 		mpic: pic@40000 {
 			interrupt-controller;
 			#address-cells = <0>;
-			#size-cells = <0>;
 			#interrupt-cells = <2>;
+			compatible = "chrp,open-pic";
 			reg = <0x40000 0x40000>;
 			device_type = "open-pic";
 		};
diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts
index 3eebeec157b3..9652456158fb 100644
--- a/arch/powerpc/boot/dts/sbc8641d.dts
+++ b/arch/powerpc/boot/dts/sbc8641d.dts
@@ -151,6 +151,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts
index 72d67564bdfc..72d15f075d34 100644
--- a/arch/powerpc/boot/dts/sequoia.dts
+++ b/arch/powerpc/boot/dts/sequoia.dts
@@ -12,12 +12,14 @@
  *
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,sequoia";
 	compatible = "amcc,sequoia";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -35,13 +37,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440EPx";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by zImage */
 			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -49,14 +51,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by zImage */
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-440epx","ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -66,11 +68,11 @@
 		compatible = "ibm,uic-440epx","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -78,22 +80,22 @@
 		compatible = "ibm,uic-440epx","ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
-		dcr-reg = <0e0 009>;
+		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1c 4 1d 4>; /* cascade */
+		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	SDR0: sdr {
 		compatible = "ibm,sdr-440epx", "ibm,sdr-440ep";
-		dcr-reg = <00e 002>;
+		dcr-reg = <0x00e 0x002>;
 	};
 
 	CPR0: cpr {
 		compatible = "ibm,cpr-440epx", "ibm,cpr-440ep";
-		dcr-reg = <00c 002>;
+		dcr-reg = <0x00c 0x002>;
 	};
 
 	plb {
@@ -105,44 +107,44 @@
 
 		SDRAM0: sdram {
 			compatible = "ibm,sdram-440epx", "ibm,sdram-44x-ddr2denali";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		DMA0: dma {
 			compatible = "ibm,dma-440epx", "ibm,dma-4xx";
-			dcr-reg = <100 027>;
+			dcr-reg = <0x100 0x027>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440epx", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <2>;
 			num-rx-chans = <2>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					/*RXEOB*/ 1 &UIC0 b 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
-			interrupt-map-mask = <ffffffff>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
 		};
 
 		USB1: usb@e0000400 {
 			compatible = "ohci-be";
-			reg = <0 e0000400 60>;
+			reg = <0x00000000 0xe0000400 0x00000060>;
 			interrupt-parent = <&UIC0>;
-			interrupts = <15 8>;
+			interrupts = <0x15 0x8>;
 		};
 
 		USB0: ehci@e0000300 {
 			compatible = "ibm,usb-ehci-440epx", "usb-ehci";
 			interrupt-parent = <&UIC0>;
-			interrupts = <1a 4>;
-			reg = <0 e0000300 90 0 e0000390 70>;
+			interrupts = <0x1a 0x4>;
+			reg = <0x00000000 0xe0000300 0x00000090 0x00000000 0xe0000390 0x00000070>;
 			big-endian;
 		};
 
@@ -150,50 +152,50 @@
 		  	compatible = "ibm,opb-440epx", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-		  	ranges = <00000000 1 00000000 80000000
-			          80000000 1 80000000 80000000>;
+		  	ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+			          0x80000000 0x00000001 0x80000000 0x80000000>;
 		  	interrupt-parent = <&UIC1>;
-		  	interrupts = <7 4>;
+		  	interrupts = <0x7 0x4>;
 		  	clock-frequency = <0>; /* Filled in by zImage */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440epx", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 
 				nor_flash@0,0 {
 					compatible = "amd,s29gl256n", "cfi-flash";
 					bank-width = <2>;
-					reg = <0 000000 4000000>;
+					reg = <0x00000000 0x00000000 0x04000000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "Kernel";
-						reg = <0 180000>;
+						reg = <0x00000000 0x00180000>;
 					};
 					partition@180000 {
 						label = "ramdisk";
-						reg = <180000 200000>;
+						reg = <0x00180000 0x00200000>;
 					};
 					partition@380000 {
 						label = "file system";
-						reg = <380000 3aa0000>;
+						reg = <0x00380000 0x03aa0000>;
 					};
 					partition@3e20000 {
 						label = "kozio";
-						reg = <3e20000 140000>;
+						reg = <0x03e20000 0x00140000>;
 					};
 					partition@3f60000 {
 						label = "env";
-						reg = <3f60000 40000>;
+						reg = <0x03f60000 0x00040000>;
 					};
 					partition@3fa0000 {
 						label = "u-boot";
-						reg = <3fa0000 60000>;
+						reg = <0x03fa0000 0x00060000>;
 					};
 				};
 
@@ -202,69 +204,69 @@
 			UART0: serial@ef600300 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600300 8>;
-		   		virtual-reg = <ef600300>;
+		   		reg = <0xef600300 0x00000008>;
+		   		virtual-reg = <0xef600300>;
 		   		clock-frequency = <0>; /* Filled in by zImage */
-		   		current-speed = <1c200>;
+		   		current-speed = <115200>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <0 4>;
+		   		interrupts = <0x0 0x4>;
 	   		};
 
 			UART1: serial@ef600400 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600400 8>;
-		   		virtual-reg = <ef600400>;
+		   		reg = <0xef600400 0x00000008>;
+		   		virtual-reg = <0xef600400>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <1 4>;
+		   		interrupts = <0x1 0x4>;
 	   		};
 
 			UART2: serial@ef600500 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600500 8>;
-		   		virtual-reg = <ef600500>;
+		   		reg = <0xef600500 0x00000008>;
+		   		virtual-reg = <0xef600500>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC1>;
-		   		interrupts = <3 4>;
+		   		interrupts = <0x3 0x4>;
 	   		};
 
 			UART3: serial@ef600600 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600600 8>;
-		   		virtual-reg = <ef600600>;
+		   		reg = <0xef600600 0x00000008>;
+		   		virtual-reg = <0xef600600>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC1>;
-		   		interrupts = <4 4>;
+		   		interrupts = <0x4 0x4>;
 	   		};
 
 			IIC0: i2c@ef600700 {
 				compatible = "ibm,iic-440epx", "ibm,iic";
-				reg = <ef600700 14>;
+				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600800 {
 				compatible = "ibm,iic-440epx", "ibm,iic";
-				reg = <ef600800 14>;
+				reg = <0xef600800 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <7 4>;
+				interrupts = <0x7 0x4>;
 			};
 
 			ZMII0: emac-zmii@ef600d00 {
 				compatible = "ibm,zmii-440epx", "ibm,zmii";
-				reg = <ef600d00 c>;
+				reg = <0xef600d00 0x0000000c>;
 			};
 
 			RGMII0: emac-rgmii@ef601000 {
 				compatible = "ibm,rgmii-440epx", "ibm,rgmii";
-				reg = <ef601000 8>;
+				reg = <0xef601000 0x00000008>;
 				has-mdio;
 			};
 
@@ -272,23 +274,23 @@
 				device_type = "network";
 				compatible = "ibm,emac-440epx", "ibm,emac4";
 				interrupt-parent = <&EMAC0>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 18 4
-						/*Wake*/  1 &UIC1 1d 4>;
-				reg = <ef600e00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
+				reg = <0xef600e00 0x00000074>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <0>;
 				rgmii-device = <&RGMII0>;
@@ -301,23 +303,23 @@
 				device_type = "network";
 				compatible = "ibm,emac-440epx", "ibm,emac4";
 				interrupt-parent = <&EMAC1>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 19 4
-						/*Wake*/  1 &UIC1 1f 4>;
-				reg = <ef600f00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+						/*Wake*/  0x1 &UIC1 0x1f 0x4>;
+				reg = <0xef600f00 0x00000074>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <1>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <1>;
 				rgmii-device = <&RGMII0>;
@@ -334,10 +336,10 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb440epx-pci", "ibm,plb-pci";
 			primary;
-			reg = <1 eec00000 8	/* Config space access */
-			       1 eed00000 4	/* IACK */
-			       1 eed00000 4	/* Special cycle */
-			       1 ef400000 40>;	/* Internal registers */
+			reg = <0x00000001 0xeec00000 0x00000008	/* Config space access */
+			       0x00000001 0xeed00000 0x00000004	/* IACK */
+			       0x00000001 0xeed00000 0x00000004	/* Special cycle */
+			       0x00000001 0xef400000 0x00000040>;	/* Internal registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed. Chip supports a second
@@ -347,16 +349,16 @@
 			 * I/O              1 E800 0000     1 E800 FFFF     64KB
 			 * I/O              1 E880 0000     1 EBFF FFFF     56MB
 			 */
-			ranges = <02000000 0 80000000 1 80000000 0 40000000
-				01000000 0 00000000 1 e8000000 0 00010000
-				01000000 0 00000000 1 e8800000 0 03800000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000001 0x80000000 0x00000000 0x40000000
+				0x01000000 0x00000000 0x00000000 0x00000001 0xe8000000 0x00000000 0x00010000
+				0x01000000 0x00000000 0x00000000 0x00000001 0xe8800000 0x00000000 0x03800000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* All PCI interrupts are routed to IRQ 67 */
-			interrupt-map-mask = <0000 0 0 0>;
-			interrupt-map = < 0000 0 0 0 &UIC2 3 8 >;
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = < 0x0 0x0 0x0 0x0 &UIC2 0x3 0x8 >;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/storcenter.dts b/arch/powerpc/boot/dts/storcenter.dts
index 5893816c0bce..eab680ce10da 100644
--- a/arch/powerpc/boot/dts/storcenter.dts
+++ b/arch/powerpc/boot/dts/storcenter.dts
@@ -95,6 +95,7 @@
 
 		mpic: interrupt-controller@40000 {
 			#interrupt-cells = <2>;
+			#address-cells = <0>;
 			device_type = "open-pic";
 			compatible = "chrp,open-pic";
 			interrupt-controller;
diff --git a/arch/powerpc/boot/dts/stx_gp3_8560.dts b/arch/powerpc/boot/dts/stx_gp3_8560.dts
index f81fd7fdb29e..fcd1db6ca0a8 100644
--- a/arch/powerpc/boot/dts/stx_gp3_8560.dts
+++ b/arch/powerpc/boot/dts/stx_gp3_8560.dts
@@ -38,6 +38,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -62,7 +63,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;
@@ -82,6 +83,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -131,6 +173,7 @@
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
 			device_type = "open-pic";
 		};
 
diff --git a/arch/powerpc/boot/dts/taishan.dts b/arch/powerpc/boot/dts/taishan.dts
index e808e1c5593a..058438f9629b 100644
--- a/arch/powerpc/boot/dts/taishan.dts
+++ b/arch/powerpc/boot/dts/taishan.dts
@@ -10,12 +10,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,taishan";
 	compatible = "amcc,taishan";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC2;
@@ -31,13 +33,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440GX";
-			reg = <0>;
-			clock-frequency = <2FAF0800>; // 800MHz
+			reg = <0x00000000>;
+			clock-frequency = <800000000>; // 800MHz
 			timebase-frequency = <0>; // Filled in by zImage
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <8000>; /* 32 kB */
-			d-cache-size = <8000>; /* 32 kB */
+			i-cache-line-size = <50>;
+			d-cache-line-size = <50>;
+			i-cache-size = <32768>; /* 32 kB */
+			d-cache-size = <32768>; /* 32 kB */
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -45,7 +47,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; // Filled in by zImage
+		reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
 	};
 
 
@@ -53,7 +55,7 @@
 		compatible = "ibm,uic-440gx", "ibm,uic";
 		interrupt-controller;
 		cell-index = <3>;
-		dcr-reg = <200 009>;
+		dcr-reg = <0x200 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -64,11 +66,11 @@
 		compatible = "ibm,uic-440gx", "ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <01 4 00 4>; /* cascade - first non-critical */
+		interrupts = <0x1 0x4 0x0 0x4>; /* cascade - first non-critical */
 		interrupt-parent = <&UICB0>;
 
 	};
@@ -77,11 +79,11 @@
 		compatible = "ibm,uic-440gx", "ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <03 4 02 4>; /* cascade */
+		interrupts = <0x3 0x4 0x2 0x4>; /* cascade */
 		interrupt-parent = <&UICB0>;
 	};
 
@@ -89,29 +91,29 @@
 		compatible = "ibm,uic-440gx", "ibm,uic";
 		interrupt-controller;
 		cell-index = <2>; /* was 1 */
-		dcr-reg = <210 009>;
+		dcr-reg = <0x210 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <05 4 04 4>; /* cascade */
+		interrupts = <0x5 0x4 0x4 0x4>; /* cascade */
 		interrupt-parent = <&UICB0>;
 	};
 
 
 	CPC0: cpc {
 		compatible = "ibm,cpc-440gp";
-		dcr-reg = <0b0 003 0e0 010>;
+		dcr-reg = <0x0b0 0x003 0x0e0 0x010>;
 		// FIXME: anything else?
 	};
 
 	L2C0: l2c {
 		compatible = "ibm,l2-cache-440gx", "ibm,l2-cache";
-		dcr-reg = <20 8			/* Internal SRAM DCR's */
-			   30 8>;		/* L2 cache DCR's */
-		cache-line-size = <20>;		/* 32 bytes */
-		cache-size = <40000>;		/* L2, 256K */
+		dcr-reg = <0x020 0x008			/* Internal SRAM DCR's */
+			   0x030 0x008>;		/* L2 cache DCR's */
+		cache-line-size = <32>;		/* 32 bytes */
+		cache-size = <262144>;		/* L2, 256K */
 		interrupt-parent = <&UIC2>;
-		interrupts = <17 1>;
+		interrupts = <0x17 0x1>;
 	};
 
 	plb {
@@ -119,41 +121,41 @@
 		#address-cells = <2>;
 		#size-cells = <1>;
 		ranges;
-		clock-frequency = <9896800>; // 160MHz
+		clock-frequency = <160000000>; // 160MHz
 
 		SDRAM0: memory-controller {
 			compatible = "ibm,sdram-440gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 			// FIXME: anything else?
 		};
 
 		SRAM0: sram {
 			compatible = "ibm,sram-440gp";
-			dcr-reg = <020 8 00a 1>;
+			dcr-reg = <0x020 0x008 0x00a 0x001>;
 		};
 
 		DMA0: dma {
 			// FIXME: ???
 			compatible = "ibm,dma-440gp";
-			dcr-reg = <100 027>;
+			dcr-reg = <0x100 0x027>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440gx", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <4>;
 			num-rx-chans = <4>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					 /*RXEOB*/ 1 &UIC0 b 4
-					 /*SERR*/  2 &UIC1 0 4
-					 /*TXDE*/  3 &UIC1 1 4
-					 /*RXDE*/  4 &UIC1 2 4>;
-			interrupt-map-mask = <ffffffff>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					 /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					 /*SERR*/  0x2 &UIC1 0x0 0x4
+					 /*TXDE*/  0x3 &UIC1 0x1 0x4
+					 /*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
 		};
 
 		POB0: opb {
@@ -162,29 +164,56 @@
 			#size-cells = <1>;
 			/* Wish there was a nicer way of specifying a full 32-bit
 			   range */
-			ranges = <00000000 1 00000000 80000000
-				  80000000 1 80000000 80000000>;
-			dcr-reg = <090 00b>;
+			ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+				  0x80000000 0x00000001 0x80000000 0x80000000>;
+			dcr-reg = <0x090 0x00b>;
 			interrupt-parent = <&UIC1>;
-			interrupts = <7 4>;
-			clock-frequency = <4C4B400>; // 80MHz
+			interrupts = <0x7 0x4>;
+			clock-frequency = <80000000>; // 80MHz
 
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440gx", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
-				clock-frequency = <4C4B400>; // 80MHz
+				clock-frequency = <80000000>; // 80MHz
 
 				/* ranges property is supplied by zImage
 				 * based on firmware's configuration of the
 				 * EBC bridge */
 
-				interrupts = <5 4>;
+				interrupts = <0x5 0x4>;
 				interrupt-parent = <&UIC1>;
 
-				/* TODO: Add other EBC devices */
+				nor_flash@0,0 {
+					compatible = "cfi-flash";
+					bank-width = <4>;
+					device-width = <2>;
+					reg = <0x0 0x0 0x4000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x0 0x180000>;
+					};
+					partition@180000 {
+						label = "root";
+						reg = <0x180000 0x200000>;
+					};
+					partition@380000 {
+						label = "user";
+						reg = <0x380000 0x3bc0000>;
+					};
+					partition@3f40000 {
+						label = "env";
+						reg = <0x3f40000 0x80000>;
+					};
+					partition@3fc0000 {
+						label = "u-boot";
+						reg = <0x3fc0000 0x40000>;
+					};
+				};
 			};
 
 
@@ -192,103 +221,103 @@
 			UART0: serial@40000200 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <40000200 8>;
-				virtual-reg = <e0000200>;
- 				clock-frequency = <A8C000>;
-				current-speed = <1C200>; /* 115200 */
+				reg = <0x40000200 0x00000008>;
+				virtual-reg = <0xe0000200>;
+ 				clock-frequency = <11059200>;
+				current-speed = <115200>; /* 115200 */
 				interrupt-parent = <&UIC0>;
-				interrupts = <0 4>;
+				interrupts = <0x0 0x4>;
 			};
 
 			UART1: serial@40000300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <40000300 8>;
-				virtual-reg = <e0000300>;
-				clock-frequency = <A8C000>;
-				current-speed = <1C200>; /* 115200 */
+				reg = <0x40000300 0x00000008>;
+				virtual-reg = <0xe0000300>;
+				clock-frequency = <11059200>;
+				current-speed = <115200>; /* 115200 */
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			IIC0: i2c@40000400 {
 				/* FIXME */
 				compatible = "ibm,iic-440gp", "ibm,iic";
-				reg = <40000400 14>;
+				reg = <0x40000400 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 			IIC1: i2c@40000500 {
 				/* FIXME */
 				compatible = "ibm,iic-440gp", "ibm,iic";
-				reg = <40000500 14>;
+				reg = <0x40000500 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <3 4>;
+				interrupts = <0x3 0x4>;
 			};
 
 			GPIO0: gpio@40000700 {
 				/* FIXME */
 				compatible = "ibm,gpio-440gp";
-				reg = <40000700 20>;
+				reg = <0x40000700 0x00000020>;
 			};
 
 			ZMII0: emac-zmii@40000780 {
 				compatible = "ibm,zmii-440gx", "ibm,zmii";
-				reg = <40000780 c>;
+				reg = <0x40000780 0x0000000c>;
 			};
 
 			RGMII0: emac-rgmii@40000790 {
 				compatible = "ibm,rgmii";
-				reg = <40000790 8>;
+				reg = <0x40000790 0x00000008>;
 			};
 
 			TAH0: emac-tah@40000b50 {
 				compatible = "ibm,tah-440gx", "ibm,tah";
-				reg = <40000b50 30>;
+				reg = <0x40000b50 0x00000030>;
 			};
 
 			TAH1: emac-tah@40000d50 {
 				compatible = "ibm,tah-440gx", "ibm,tah";
-				reg = <40000d50 30>;
+				reg = <0x40000d50 0x00000030>;
 			};
 
 			EMAC0: ethernet@40000800 {
-				unused = <1>;
+				unused = <0x1>;
 				device_type = "network";
 				compatible = "ibm,emac-440gx", "ibm,emac4";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1c 4 1d 4>;
-				reg = <40000800 70>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0x40000800 0x00000074>;
 				local-mac-address = [000000000000]; // Filled in by zImage
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000001>;
+				phy-map = <0x00000001>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <0>;
 			};
 		 	EMAC1: ethernet@40000900 {
-				unused = <1>;
+				unused = <0x1>;
 				device_type = "network";
 				compatible = "ibm,emac-440gx", "ibm,emac4";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1e 4 1f 4>;
-				reg = <40000900 70>;
+				interrupts = <0x1e 0x4 0x1f 0x4>;
+				reg = <0x40000900 0x00000074>;
 				local-mac-address = [000000000000]; // Filled in by zImage
 				mal-device = <&MAL0>;
 				mal-tx-channel = <1>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000001>;
+				phy-map = <0x00000001>;
  				zmii-device = <&ZMII0>;
 				zmii-channel = <1>;
 			};
@@ -297,18 +326,18 @@
 				device_type = "network";
 				compatible = "ibm,emac-440gx", "ibm,emac4";
 				interrupt-parent = <&UIC2>;
-				interrupts = <0 4 1 4>;
-				reg = <40000c00 70>;
+				interrupts = <0x0 0x4 0x1 0x4>;
+				reg = <0x40000c00 0x00000074>;
 				local-mac-address = [000000000000]; // Filled in by zImage
 				mal-device = <&MAL0>;
 				mal-tx-channel = <2>;
 				mal-rx-channel = <2>;
 				cell-index = <2>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000001>;
+				phy-map = <0x00000001>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <0>;
  				zmii-device = <&ZMII0>;
@@ -321,18 +350,18 @@
 				device_type = "network";
 				compatible = "ibm,emac-440gx", "ibm,emac4";
 				interrupt-parent = <&UIC2>;
-				interrupts = <2 4 3 4>;
-				reg = <40000e00 70>;
+				interrupts = <0x2 0x4 0x3 0x4>;
+				reg = <0x40000e00 0x00000074>;
 				local-mac-address = [000000000000]; // Filled in by zImage
 				mal-device = <&MAL0>;
 				mal-tx-channel = <3>;
 				mal-rx-channel = <3>;
 				cell-index = <3>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000003>;
+				phy-map = <0x00000003>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <1>;
  				zmii-device = <&ZMII0>;
@@ -344,9 +373,9 @@
 
 			GPT0: gpt@40000a00 {
 				/* FIXME */
-				reg = <40000a00 d4>;
+				reg = <0x40000a00 0x000000d4>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <12 4 13 4 14 4 15 4 16 4>;
+				interrupts = <0x12 0x4 0x13 0x4 0x14 0x4 0x15 0x4 0x16 0x4>;
 			};
 
 		};
@@ -360,34 +389,34 @@
 			primary;
 			large-inbound-windows;
 			enable-msi-hole;
-			reg = <2 0ec00000   8	/* Config space access */
-			       0 0 0		/* no IACK cycles */
-			       2 0ed00000   4   /* Special cycles */
-			       2 0ec80000 100	/* Internal registers */
-			       2 0ec80100  fc>;	/* Internal messaging registers */
+			reg = <0x00000002 0x0ec00000   0x00000008	/* Config space access */
+			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
+			       0x00000002 0x0ed00000   0x00000004   /* Special cycles */
+			       0x00000002 0x0ec80000 0x00000100	/* Internal registers */
+			       0x00000002 0x0ec80100  0x000000fc>;	/* Internal messaging registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 00000003 80000000 0 80000000
-				  01000000 0 00000000 00000002 08000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000003 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x00000002 0x08000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
-			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 			interrupt-map = <
 				/* IDSEL 1 */
-				0800 0 0 1 &UIC0 17 8
-				0800 0 0 2 &UIC0 18 8
-				0800 0 0 3 &UIC0 19 8
-				0800 0 0 4 &UIC0 1a 8
+				0x800 0x0 0x0 0x1 &UIC0 0x17 0x8
+				0x800 0x0 0x0 0x2 &UIC0 0x18 0x8
+				0x800 0x0 0x0 0x3 &UIC0 0x19 0x8
+				0x800 0x0 0x0 0x4 &UIC0 0x1a 0x8
 
 				/* IDSEL 2 */
-				1000 0 0 1 &UIC0 18 8
-				1000 0 0 2 &UIC0 19 8
-				1000 0 0 3 &UIC0 1a 8
-				1000 0 0 4 &UIC0 17 8
+				0x1000 0x0 0x0 0x1 &UIC0 0x18 0x8
+				0x1000 0x0 0x0 0x2 &UIC0 0x19 0x8
+				0x1000 0x0 0x0 0x3 &UIC0 0x1a 0x8
+				0x1000 0x0 0x0 0x4 &UIC0 0x17 0x8
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts
index 773a68e00058..3008bf8830c1 100644
--- a/arch/powerpc/boot/dts/tqm5200.dts
+++ b/arch/powerpc/boot/dts/tqm5200.dts
@@ -70,6 +70,20 @@
 			fsl,has-wdt;
 		};
 
+		can@900 {
+			compatible = "fsl,mpc5200-mscan";
+			interrupts = <2 17 0>;
+			interrupt-parent = <&mpc5200_pic>;
+			reg = <0x900 0x80>;
+		};
+
+		can@980 {
+			compatible = "fsl,mpc5200-mscan";
+			interrupts = <2 18 0>;
+			interrupt-parent = <&mpc5200_pic>;
+			reg = <0x980 0x80>;
+		};
+
 		gpio@b00 {
 			compatible = "fsl,mpc5200-gpio";
 			reg = <0xb00 0x40>;
diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts
index 1addb3ae719e..e1d260b9085e 100644
--- a/arch/powerpc/boot/dts/tqm8540.dts
+++ b/arch/powerpc/boot/dts/tqm8540.dts
@@ -12,8 +12,8 @@
 /dts-v1/;
 
 / {
-	model = "tqm,8540";
-	compatible = "tqm,8540", "tqm,85xx";
+	model = "tqc,tqm8540";
+	compatible = "tqc,tqm8540";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -40,6 +40,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -64,7 +65,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;
@@ -89,6 +90,47 @@
 			};
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -177,6 +219,7 @@
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			device_type = "open-pic";
+			compatible = "chrp,open-pic";
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts
index 9e01093f496e..d76441ec5dc7 100644
--- a/arch/powerpc/boot/dts/tqm8541.dts
+++ b/arch/powerpc/boot/dts/tqm8541.dts
@@ -12,8 +12,8 @@
 /dts-v1/;
 
 / {
-	model = "tqm,8541";
-	compatible = "tqm,8541", "tqm,85xx";
+	model = "tqc,tqm8541";
+	compatible = "tqc,tqm8541";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -39,6 +39,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -63,7 +64,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;
@@ -88,6 +89,47 @@
 			};
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8541-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -158,12 +200,24 @@
 			interrupt-parent = <&mpic>;
 		};
 
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
 		mpic: pic@40000 {
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			device_type = "open-pic";
+			compatible = "chrp,open-pic";
 		};
 
 		cpm@919c0 {
diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
new file mode 100644
index 000000000000..64d2d5bbcdf1
--- /dev/null
+++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
@@ -0,0 +1,406 @@
+/*
+ * TQM8548 Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2008 Wolfgang Grandegger <wg@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "tqc,tqm8548";
+	compatible = "tqc,tqm8548";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8548@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;	// L1, 32K
+			i-cache-size = <0x8000>;	// L1, 32K
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000>;	// Filled in by U-Boot
+	};
+
+	soc8548@a0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xa0000000 0x100000>;
+		reg = <0xa0000000 0x1000>;	// CCSRBAR
+		bus-frequency = <0>;
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8548-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8548-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>;	// L2, 512K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <0x24520 0x20>;
+
+			phy1: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+			phy2: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <2>;
+				device_type = "ethernet-phy";
+			};
+			phy3: ethernet-phy@3 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <3>;
+				device_type = "ethernet-phy";
+			};
+			phy4: ethernet-phy@4 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <4>;
+				device_type = "ethernet-phy";
+			};
+			phy5: ethernet-phy@5 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <5>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		enet0: ethernet@24000 {
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy2>;
+		};
+
+		enet1: ethernet@25000 {
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+		};
+
+		enet2: ethernet@26000 {
+			cell-index = <2>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy3>;
+		};
+
+		enet3: ethernet@27000 {
+			cell-index = <3>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x27000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <37 2 38 2 39 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy4>;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;	// reg base, size
+			clock-frequency = <0>;	// should we fill in in uboot?
+			current-speed = <115200>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;	// reg base, size
+			clock-frequency = <0>;	// should we fill in in uboot?
+			current-speed = <115200>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	// global utilities reg
+			compatible = "fsl,mpc8548-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+	};
+
+	localbus@a0005000 {
+		compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xa0005000 0x100>;	// BRx, ORx, etc.
+
+		ranges = <
+			0 0x0 0xfc000000 0x04000000	// NOR FLASH bank 1
+			1 0x0 0xf8000000 0x08000000	// NOR FLASH bank 0
+			2 0x0 0xa3000000 0x00008000	// CAN (2 x i82527)
+			3 0x0 0xa3010000 0x00008000	// NAND FLASH
+
+		>;
+
+		flash@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <1 0x0 0x8000000>;
+			bank-width = <4>;
+			device-width = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x00000000 0x00200000>;
+			};
+			partition@200000 {
+				label = "root";
+				reg = <0x00200000 0x00300000>;
+			};
+			partition@500000 {
+				label = "user";
+				reg = <0x00500000 0x07a00000>;
+			};
+			partition@7f00000 {
+				label = "env1";
+				reg = <0x07f00000 0x00040000>;
+			};
+			partition@7f40000 {
+				label = "env2";
+				reg = <0x07f40000 0x00040000>;
+			};
+			partition@7f80000 {
+				label = "u-boot";
+				reg = <0x07f80000 0x00080000>;
+				read-only;
+			};
+		};
+
+		/* Note: CAN support needs be enabled in U-Boot */
+		can0@2,0 {
+			compatible = "intel,82527"; // Bosch CC770
+			reg = <2 0x0 0x100>;
+			interrupts = <4 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		can1@2,100 {
+			compatible = "intel,82527"; // Bosch CC770
+			reg = <2 0x100 0x100>;
+			interrupts = <4 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		/* Note: NAND support needs to be enabled in U-Boot */
+		upm@3,0 {
+			#address-cells = <0>;
+			#size-cells = <0>;
+			compatible = "fsl,upm-nand";
+			reg = <3 0x0 0x800>;
+			fsl,upm-addr-offset = <0x10>;
+			fsl,upm-cmd-offset = <0x08>;
+			chip-delay = <25>; // in micro-seconds
+
+			nand@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					    label = "fs";
+					    reg = <0x00000000 0x01000000>;
+				};
+			};
+		};
+	};
+
+	pci0: pci@a0008000 {
+		cell-index = <0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+		reg = <0xa0008000 0x1000>;
+		clock-frequency = <33333333>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 28 */
+				 0xe000 0 0 1 &mpic 2 1
+				 0xe000 0 0 2 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xa2000000 0 0x01000000>;
+	};
+
+	pci1: pcie@a000a000 {
+		cell-index = <2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 (PEX) */
+			0x00000 0 0 1 &mpic 0 1
+			0x00000 0 0 2 &mpic 1 1
+			0x00000 0 0 3 &mpic 2 1
+			0x00000 0 0 4 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0xb0000000 0xb0000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xaf000000 0 0x08000000>;
+		clock-frequency = <33333333>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xa000a000 0x1000>;
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0xb0000000 0x02000000 0
+			          0xb0000000 0 0x10000000
+				  0x01000000 0 0x00000000 0x01000000 0
+				  0x00000000 0 0x08000000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts
new file mode 100644
index 000000000000..2563112cabd3
--- /dev/null
+++ b/arch/powerpc/boot/dts/tqm8548.dts
@@ -0,0 +1,411 @@
+/*
+ * TQM8548 Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2008 Wolfgang Grandegger <wg@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "tqc,tqm8548";
+	compatible = "tqc,tqm8548";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8548@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;	// L1, 32K
+			i-cache-size = <0x8000>;	// L1, 32K
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000>;	// Filled in by U-Boot
+	};
+
+	soc8548@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xe0000000 0x100000>;
+		reg = <0xe0000000 0x1000>;	// CCSRBAR
+		bus-frequency = <0>;
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8548-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8548-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>;	// L2, 512K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <0x24520 0x20>;
+
+			phy1: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+			phy2: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <2>;
+				device_type = "ethernet-phy";
+			};
+			phy3: ethernet-phy@3 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <3>;
+				device_type = "ethernet-phy";
+			};
+			phy4: ethernet-phy@4 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <4>;
+				device_type = "ethernet-phy";
+			};
+			phy5: ethernet-phy@5 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <5>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		enet0: ethernet@24000 {
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy2>;
+		};
+
+		enet1: ethernet@25000 {
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+		};
+
+		enet2: ethernet@26000 {
+			cell-index = <2>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy3>;
+		};
+
+		enet3: ethernet@27000 {
+			cell-index = <3>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x27000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <37 2 38 2 39 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy4>;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;	// reg base, size
+			clock-frequency = <0>;	// should we fill in in uboot?
+			current-speed = <115200>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;	// reg base, size
+			clock-frequency = <0>;	// should we fill in in uboot?
+			current-speed = <115200>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	// global utilities reg
+			compatible = "fsl,mpc8548-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+	};
+
+	localbus@e0005000 {
+		compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xe0005000 0x100>;	// BRx, ORx, etc.
+
+		ranges = <
+			0 0x0 0xfc000000 0x04000000	// NOR FLASH bank 1
+			1 0x0 0xf8000000 0x08000000	// NOR FLASH bank 0
+			2 0x0 0xe3000000 0x00008000	// CAN (2 x i82527)
+			3 0x0 0xe3010000 0x00008000	// NAND FLASH
+
+		>;
+
+		flash@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <1 0x0 0x8000000>;
+			bank-width = <4>;
+			device-width = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x00000000 0x00200000>;
+			};
+			partition@200000 {
+				label = "root";
+				reg = <0x00200000 0x00300000>;
+			};
+			partition@500000 {
+				label = "user";
+				reg = <0x00500000 0x07a00000>;
+			};
+			partition@7f00000 {
+				label = "env1";
+				reg = <0x07f00000 0x00040000>;
+			};
+			partition@7f40000 {
+				label = "env2";
+				reg = <0x07f40000 0x00040000>;
+			};
+			partition@7f80000 {
+				label = "u-boot";
+				reg = <0x07f80000 0x00080000>;
+				read-only;
+			};
+		};
+
+		/* Note: CAN support needs be enabled in U-Boot */
+		can0@2,0 {
+			compatible = "intel,82527"; // Bosch CC770
+			reg = <2 0x0 0x100>;
+			interrupts = <4 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		can1@2,100 {
+			compatible = "intel,82527"; // Bosch CC770
+			reg = <2 0x100 0x100>;
+			interrupts = <4 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		/* Note: NAND support needs to be enabled in U-Boot */
+		upm@3,0 {
+			#address-cells = <0>;
+			#size-cells = <0>;
+			compatible = "fsl,upm-nand";
+			reg = <3 0x0 0x800>;
+			fsl,upm-addr-offset = <0x10>;
+			fsl,upm-cmd-offset = <0x08>;
+			chip-delay = <25>; // in micro-seconds
+
+			nand@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					    label = "fs";
+					    reg = <0x00000000 0x01000000>;
+				};
+			};
+		};
+	};
+
+	pci0: pci@e0008000 {
+		cell-index = <0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+		reg = <0xe0008000 0x1000>;
+		clock-frequency = <33333333>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 28 */
+				 0xe000 0 0 1 &mpic 2 1
+				 0xe000 0 0 2 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xe2000000 0 0x01000000>;
+	};
+
+	pci1: pcie@e000a000 {
+		cell-index = <2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 (PEX) */
+			0x00000 0 0 1 &mpic 0 1
+			0x00000 0 0 2 &mpic 1 1
+			0x00000 0 0 3 &mpic 2 1
+			0x00000 0 0 4 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xef000000 0 0x08000000>;
+		clock-frequency = <33333333>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe000a000 0x1000>;
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0xc0000000 0x02000000 0
+			          0xc0000000 0 0x20000000
+				  0x01000000 0 0x00000000 0x01000000 0
+				  0x00000000 0 0x08000000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts
index a20eb06c482f..6f7ea59c4846 100644
--- a/arch/powerpc/boot/dts/tqm8555.dts
+++ b/arch/powerpc/boot/dts/tqm8555.dts
@@ -12,8 +12,8 @@
 /dts-v1/;
 
 / {
-	model = "tqm,8555";
-	compatible = "tqm,8555", "tqm,85xx";
+	model = "tqc,tqm8555";
+	compatible = "tqc,tqm8555";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -39,6 +39,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -63,7 +64,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;
@@ -88,6 +89,47 @@
 			};
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -158,12 +200,24 @@
 			interrupt-parent = <&mpic>;
 		};
 
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
 		mpic: pic@40000 {
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			device_type = "open-pic";
+			compatible = "chrp,open-pic";
 		};
 
 		cpm@919c0 {
diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts
index b9ac6c943b89..3fe35208907b 100644
--- a/arch/powerpc/boot/dts/tqm8560.dts
+++ b/arch/powerpc/boot/dts/tqm8560.dts
@@ -2,6 +2,7 @@
  * TQM 8560 Device Tree Source
  *
  * Copyright 2008 Freescale Semiconductor Inc.
+ * Copyright 2008 Wolfgang Grandegger <wg@grandegger.com>
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -12,8 +13,8 @@
 /dts-v1/;
 
 / {
-	model = "tqm,8560";
-	compatible = "tqm,8560", "tqm,85xx";
+	model = "tqc,tqm8560";
+	compatible = "tqc,tqm8560";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -40,6 +41,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -64,7 +66,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;
@@ -89,6 +91,47 @@
 			};
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -145,6 +188,7 @@
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			device_type = "open-pic";
+			compatible = "chrp,open-pic";
 		};
 
 		cpm@919c0 {
@@ -221,6 +265,70 @@
 		};
 	};
 
+	localbus@e0005000 {
+		compatible = "fsl,mpc8560-localbus", "fsl,pq3-localbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xe0005000 0x100>;	// BRx, ORx, etc.
+
+		ranges = <
+			0 0x0 0xfc000000 0x04000000	// NOR FLASH bank 1
+			1 0x0 0xf8000000 0x08000000	// NOR FLASH bank 0
+			2 0x0 0xe3000000 0x00008000	// CAN (2 x i82527)
+		>;
+
+		flash@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <1 0x0 0x8000000>;
+			bank-width = <4>;
+			device-width = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x00000000 0x00200000>;
+			};
+			partition@200000 {
+				label = "root";
+				reg = <0x00200000 0x00300000>;
+			};
+			partition@500000 {
+				label = "user";
+				reg = <0x00500000 0x07a00000>;
+			};
+			partition@7f00000 {
+				label = "env1";
+				reg = <0x07f00000 0x00040000>;
+			};
+			partition@7f40000 {
+				label = "env2";
+				reg = <0x07f40000 0x00040000>;
+			};
+			partition@7f80000 {
+				label = "u-boot";
+				reg = <0x07f80000 0x00080000>;
+				read-only;
+			};
+		};
+
+		/* Note: CAN support needs be enabled in U-Boot */
+		can0@2,0 {
+			compatible = "intel,82527"; // Bosch CC770
+			reg = <2 0x0 0x100>;
+			interrupts = <4 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		can1@2,100 {
+			compatible = "intel,82527"; // Bosch CC770
+			reg = <2 0x100 0x100>;
+			interrupts = <4 0>;
+			interrupt-parent = <&mpic>;
+		};
+	};
+
 	pci0: pci@e0008000 {
 		cell-index = <0>;
 		#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/virtex440-ml507.dts b/arch/powerpc/boot/dts/virtex440-ml507.dts
new file mode 100644
index 000000000000..dc8e78e2dceb
--- /dev/null
+++ b/arch/powerpc/boot/dts/virtex440-ml507.dts
@@ -0,0 +1,296 @@
+/*
+ * This file supports the Xilinx ML507 board with the 440 processor.
+ * A reference design for the FPGA is provided at http://git.xilinx.com.
+ *
+ * (C) Copyright 2008 Xilinx, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "xlnx,virtex440";
+	dcr-parent = <&ppc440_0>;
+	model = "testing";
+	DDR2_SDRAM: memory@0 {
+		device_type = "memory";
+		reg = < 0 0x10000000 >;
+	} ;
+	chosen {
+		bootargs = "console=ttyS0 ip=on root=/dev/ram";
+		linux,stdout-path = "/plb@0/serial@83e00000";
+	} ;
+	cpus {
+		#address-cells = <1>;
+		#cpus = <1>;
+		#size-cells = <0>;
+		ppc440_0: cpu@0 {
+			clock-frequency = <400000000>;
+			compatible = "PowerPC,440", "ibm,ppc440";
+			d-cache-line-size = <0x20>;
+			d-cache-size = <0x8000>;
+			dcr-access-method = "native";
+			dcr-controller ;
+			device_type = "cpu";
+			i-cache-line-size = <0x20>;
+			i-cache-size = <0x8000>;
+			model = "PowerPC,440";
+			reg = <0>;
+			timebase-frequency = <400000000>;
+			xlnx,apu-control = <1>;
+			xlnx,apu-udi-0 = <0>;
+			xlnx,apu-udi-1 = <0>;
+			xlnx,apu-udi-10 = <0>;
+			xlnx,apu-udi-11 = <0>;
+			xlnx,apu-udi-12 = <0>;
+			xlnx,apu-udi-13 = <0>;
+			xlnx,apu-udi-14 = <0>;
+			xlnx,apu-udi-15 = <0>;
+			xlnx,apu-udi-2 = <0>;
+			xlnx,apu-udi-3 = <0>;
+			xlnx,apu-udi-4 = <0>;
+			xlnx,apu-udi-5 = <0>;
+			xlnx,apu-udi-6 = <0>;
+			xlnx,apu-udi-7 = <0>;
+			xlnx,apu-udi-8 = <0>;
+			xlnx,apu-udi-9 = <0>;
+			xlnx,dcr-autolock-enable = <1>;
+			xlnx,dcu-rd-ld-cache-plb-prio = <0>;
+			xlnx,dcu-rd-noncache-plb-prio = <0>;
+			xlnx,dcu-rd-touch-plb-prio = <0>;
+			xlnx,dcu-rd-urgent-plb-prio = <0>;
+			xlnx,dcu-wr-flush-plb-prio = <0>;
+			xlnx,dcu-wr-store-plb-prio = <0>;
+			xlnx,dcu-wr-urgent-plb-prio = <0>;
+			xlnx,dma0-control = <0>;
+			xlnx,dma0-plb-prio = <0>;
+			xlnx,dma0-rxchannelctrl = <0x1010000>;
+			xlnx,dma0-rxirqtimer = <0x3ff>;
+			xlnx,dma0-txchannelctrl = <0x1010000>;
+			xlnx,dma0-txirqtimer = <0x3ff>;
+			xlnx,dma1-control = <0>;
+			xlnx,dma1-plb-prio = <0>;
+			xlnx,dma1-rxchannelctrl = <0x1010000>;
+			xlnx,dma1-rxirqtimer = <0x3ff>;
+			xlnx,dma1-txchannelctrl = <0x1010000>;
+			xlnx,dma1-txirqtimer = <0x3ff>;
+			xlnx,dma2-control = <0>;
+			xlnx,dma2-plb-prio = <0>;
+			xlnx,dma2-rxchannelctrl = <0x1010000>;
+			xlnx,dma2-rxirqtimer = <0x3ff>;
+			xlnx,dma2-txchannelctrl = <0x1010000>;
+			xlnx,dma2-txirqtimer = <0x3ff>;
+			xlnx,dma3-control = <0>;
+			xlnx,dma3-plb-prio = <0>;
+			xlnx,dma3-rxchannelctrl = <0x1010000>;
+			xlnx,dma3-rxirqtimer = <0x3ff>;
+			xlnx,dma3-txchannelctrl = <0x1010000>;
+			xlnx,dma3-txirqtimer = <0x3ff>;
+			xlnx,endian-reset = <0>;
+			xlnx,generate-plb-timespecs = <1>;
+			xlnx,icu-rd-fetch-plb-prio = <0>;
+			xlnx,icu-rd-spec-plb-prio = <0>;
+			xlnx,icu-rd-touch-plb-prio = <0>;
+			xlnx,interconnect-imask = <0xffffffff>;
+			xlnx,mplb-allow-lock-xfer = <1>;
+			xlnx,mplb-arb-mode = <0>;
+			xlnx,mplb-awidth = <0x20>;
+			xlnx,mplb-counter = <0x500>;
+			xlnx,mplb-dwidth = <0x80>;
+			xlnx,mplb-max-burst = <8>;
+			xlnx,mplb-native-dwidth = <0x80>;
+			xlnx,mplb-p2p = <0>;
+			xlnx,mplb-prio-dcur = <2>;
+			xlnx,mplb-prio-dcuw = <3>;
+			xlnx,mplb-prio-icu = <4>;
+			xlnx,mplb-prio-splb0 = <1>;
+			xlnx,mplb-prio-splb1 = <0>;
+			xlnx,mplb-read-pipe-enable = <1>;
+			xlnx,mplb-sync-tattribute = <0>;
+			xlnx,mplb-wdog-enable = <1>;
+			xlnx,mplb-write-pipe-enable = <1>;
+			xlnx,mplb-write-post-enable = <1>;
+			xlnx,num-dma = <1>;
+			xlnx,pir = <0xf>;
+			xlnx,ppc440mc-addr-base = <0>;
+			xlnx,ppc440mc-addr-high = <0xfffffff>;
+			xlnx,ppc440mc-arb-mode = <0>;
+			xlnx,ppc440mc-bank-conflict-mask = <0xc00000>;
+			xlnx,ppc440mc-control = <0xf810008f>;
+			xlnx,ppc440mc-max-burst = <8>;
+			xlnx,ppc440mc-prio-dcur = <2>;
+			xlnx,ppc440mc-prio-dcuw = <3>;
+			xlnx,ppc440mc-prio-icu = <4>;
+			xlnx,ppc440mc-prio-splb0 = <1>;
+			xlnx,ppc440mc-prio-splb1 = <0>;
+			xlnx,ppc440mc-row-conflict-mask = <0x3ffe00>;
+			xlnx,ppcdm-asyncmode = <0>;
+			xlnx,ppcds-asyncmode = <0>;
+			xlnx,user-reset = <0>;
+			DMA0: sdma@80 {
+				compatible = "xlnx,ll-dma-1.00.a";
+				dcr-reg = < 0x80 0x11 >;
+				interrupt-parent = <&xps_intc_0>;
+				interrupts = < 9 2 0xa 2 >;
+			} ;
+		} ;
+	} ;
+	plb_v46_0: plb@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "xlnx,plb-v46-1.02.a", "simple-bus";
+		ranges ;
+		DIP_Switches_8Bit: gpio@81460000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 6 2 >;
+			reg = < 0x81460000 0x10000 >;
+			xlnx,all-inputs = <1>;
+			xlnx,all-inputs-2 = <0>;
+			xlnx,dout-default = <0>;
+			xlnx,dout-default-2 = <0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <8>;
+			xlnx,interrupt-present = <1>;
+			xlnx,is-bidir = <1>;
+			xlnx,is-bidir-2 = <1>;
+			xlnx,is-dual = <0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+		} ;
+		Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,compound";
+			ethernet@81c00000 {
+				compatible = "xlnx,xps-ll-temac-1.01.b";
+				device_type = "network";
+				interrupt-parent = <&xps_intc_0>;
+				interrupts = < 5 2 >;
+				llink-connected = <&DMA0>;
+				local-mac-address = [ 02 00 00 00 00 00 ];
+				reg = < 0x81c00000 0x40 >;
+				xlnx,bus2core-clk-ratio = <1>;
+				xlnx,phy-type = <1>;
+				xlnx,phyaddr = <1>;
+				xlnx,rxcsum = <1>;
+				xlnx,rxfifo = <0x1000>;
+				xlnx,temac-type = <0>;
+				xlnx,txcsum = <1>;
+				xlnx,txfifo = <0x1000>;
+			} ;
+		} ;
+		LEDs_8Bit: gpio@81400000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			reg = < 0x81400000 0x10000 >;
+			xlnx,all-inputs = <0>;
+			xlnx,all-inputs-2 = <0>;
+			xlnx,dout-default = <0>;
+			xlnx,dout-default-2 = <0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <8>;
+			xlnx,interrupt-present = <0>;
+			xlnx,is-bidir = <1>;
+			xlnx,is-bidir-2 = <1>;
+			xlnx,is-dual = <0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+		} ;
+		LEDs_Positions: gpio@81420000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			reg = < 0x81420000 0x10000 >;
+			xlnx,all-inputs = <0>;
+			xlnx,all-inputs-2 = <0>;
+			xlnx,dout-default = <0>;
+			xlnx,dout-default-2 = <0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <5>;
+			xlnx,interrupt-present = <0>;
+			xlnx,is-bidir = <1>;
+			xlnx,is-bidir-2 = <1>;
+			xlnx,is-dual = <0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+		} ;
+		Push_Buttons_5Bit: gpio@81440000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 7 2 >;
+			reg = < 0x81440000 0x10000 >;
+			xlnx,all-inputs = <1>;
+			xlnx,all-inputs-2 = <0>;
+			xlnx,dout-default = <0>;
+			xlnx,dout-default-2 = <0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <5>;
+			xlnx,interrupt-present = <1>;
+			xlnx,is-bidir = <1>;
+			xlnx,is-bidir-2 = <1>;
+			xlnx,is-dual = <0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+		} ;
+		RS232_Uart_1: serial@83e00000 {
+			clock-frequency = <100000000>;
+			compatible = "xlnx,xps-uart16550-2.00.a", "ns16550";
+			current-speed = <0x2580>;
+			device_type = "serial";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 8 2 >;
+			reg = < 0x83e00000 0x10000 >;
+			reg-offset = <3>;
+			reg-shift = <2>;
+			xlnx,family = "virtex5";
+			xlnx,has-external-rclk = <0>;
+			xlnx,has-external-xin = <0>;
+			xlnx,is-a-16550 = <1>;
+		} ;
+		SysACE_CompactFlash: sysace@83600000 {
+			compatible = "xlnx,xps-sysace-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 4 2 >;
+			reg = < 0x83600000 0x10000 >;
+			xlnx,family = "virtex5";
+			xlnx,mem-width = <0x10>;
+		} ;
+		xps_bram_if_cntlr_1: xps-bram-if-cntlr@ffff0000 {
+			compatible = "xlnx,xps-bram-if-cntlr-1.00.a";
+			reg = < 0xffff0000 0x10000 >;
+			xlnx,family = "virtex5";
+		} ;
+		xps_intc_0: interrupt-controller@81800000 {
+			#interrupt-cells = <2>;
+			compatible = "xlnx,xps-intc-1.00.a";
+			interrupt-controller ;
+			reg = < 0x81800000 0x10000 >;
+			xlnx,num-intr-inputs = <0xb>;
+		} ;
+		xps_timebase_wdt_1: xps-timebase-wdt@83a00000 {
+			compatible = "xlnx,xps-timebase-wdt-1.00.b";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 2 0 1 2 >;
+			reg = < 0x83a00000 0x10000 >;
+			xlnx,family = "virtex5";
+			xlnx,wdt-enable-once = <0>;
+			xlnx,wdt-interval = <0x1e>;
+		} ;
+		xps_timer_1: timer@83c00000 {
+			compatible = "xlnx,xps-timer-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 3 2 >;
+			reg = < 0x83c00000 0x10000 >;
+			xlnx,count-width = <0x20>;
+			xlnx,family = "virtex5";
+			xlnx,gen0-assert = <1>;
+			xlnx,gen1-assert = <1>;
+			xlnx,one-timer-only = <1>;
+			xlnx,trig0-assert = <1>;
+			xlnx,trig1-assert = <1>;
+		} ;
+	} ;
+}  ;
diff --git a/arch/powerpc/boot/dts/walnut.dts b/arch/powerpc/boot/dts/walnut.dts
index a328607c8f84..4a9f726ada13 100644
--- a/arch/powerpc/boot/dts/walnut.dts
+++ b/arch/powerpc/boot/dts/walnut.dts
@@ -9,12 +9,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	model = "ibm,walnut";
 	compatible = "ibm,walnut";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC;
@@ -29,13 +31,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,405GP";
-			reg = <0>;
-			clock-frequency = <bebc200>; /* Filled in by zImage */
+			reg = <0x00000000>;
+			clock-frequency = <200000000>; /* Filled in by zImage */
 			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <4000>;
-			d-cache-size = <4000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>;
+			d-cache-size = <16384>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -43,14 +45,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0>; /* Filled in by zImage */
+		reg = <0x00000000 0x00000000>; /* Filled in by zImage */
 	};
 
 	UIC0: interrupt-controller {
 		compatible = "ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 9>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -65,63 +67,63 @@
 
 		SDRAM0: memory-controller {
 			compatible = "ibm,sdram-405gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		MAL: mcmal {
 			compatible = "ibm,mcmal-405gp", "ibm,mcmal";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <1>;
 			num-rx-chans = <1>;
 			interrupt-parent = <&UIC0>;
 			interrupts = <
-				b 4 /* TXEOB */
-				c 4 /* RXEOB */
-				a 4 /* SERR */
-				d 4 /* TXDE */
-				e 4 /* RXDE */>;
+				0xb 0x4 /* TXEOB */
+				0xc 0x4 /* RXEOB */
+				0xa 0x4 /* SERR */
+				0xd 0x4 /* TXDE */
+				0xe 0x4 /* RXDE */>;
 		};
 
 		POB0: opb {
 			compatible = "ibm,opb-405gp", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <ef600000 ef600000 a00000>;
-			dcr-reg = <0a0 5>;
+			ranges = <0xef600000 0xef600000 0x00a00000>;
+			dcr-reg = <0x0a0 0x005>;
 			clock-frequency = <0>; /* Filled in by zImage */
 
 			UART0: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600300 8>;
-				virtual-reg = <ef600300>;
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <2580>;
+				current-speed = <9600>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <0 4>;
+				interrupts = <0x0 0x4>;
 			};
 
 			UART1: serial@ef600400 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600400 8>;
-				virtual-reg = <ef600400>;
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <2580>;
+				current-speed = <9600>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			IIC: i2c@ef600500 {
 				compatible = "ibm,iic-405gp", "ibm,iic";
-				reg = <ef600500 11>;
+				reg = <0xef600500 0x00000011>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			GPIO: gpio@ef600700 {
 				compatible = "ibm,gpio-405gp";
-				reg = <ef600700 20>;
+				reg = <0xef600700 0x00000020>;
 			};
 
 			EMAC: ethernet@ef600800 {
@@ -129,26 +131,26 @@
 				compatible = "ibm,emac-405gp", "ibm,emac";
 				interrupt-parent = <&UIC0>;
 				interrupts = <
-					f 4 /* Ethernet */
-					9 4 /* Ethernet Wake Up */>;
+					0xf 0x4 /* Ethernet */
+					0x9 0x4 /* Ethernet Wake Up */>;
 				local-mac-address = [000000000000]; /* Filled in by zImage */
-				reg = <ef600800 70>;
+				reg = <0xef600800 0x00000070>;
 				mal-device = <&MAL>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000001>;
+				phy-map = <0x00000001>;
 			};
 
 		};
 
 		EBC0: ebc {
 			compatible = "ibm,ebc-405gp", "ibm,ebc";
-			dcr-reg = <012 2>;
+			dcr-reg = <0x012 0x002>;
 			#address-cells = <2>;
 			#size-cells = <1>;
 			/* The ranges property is supplied by the bootwrapper
@@ -158,18 +160,18 @@
 			clock-frequency = <0>; /* Filled in by zImage */
 
 			sram@0,0 {
-				reg = <0 0 80000>;
+				reg = <0x00000000 0x00000000 0x00080000>;
 			};
 
 			flash@0,80000 {
 				compatible = "jedec-flash";
 				bank-width = <1>;
-				reg = <0 80000 80000>;
+				reg = <0x00000000 0x00080000 0x00080000>;
 				#address-cells = <1>;
 				#size-cells = <1>;
 				partition@0 {
 					label = "OpenBIOS";
-					reg = <0 80000>;
+					reg = <0x00000000 0x00080000>;
 					read-only;
 				};
 			};
@@ -177,24 +179,24 @@
 			nvram@1,0 {
 				/* NVRAM and RTC */
 				compatible = "ds1743-nvram";
-				#bytes = <2000>;
-				reg = <1 0 2000>;
+				#bytes = <0x2000>;
+				reg = <0x00000001 0x00000000 0x00002000>;
 			};
 
 			keyboard@2,0 {
 				compatible = "intel,82C42PC";
-				reg = <2 0 2>;
+				reg = <0x00000002 0x00000000 0x00000002>;
 			};
 
 			ir@3,0 {
 				compatible = "ti,TIR2000PAG";
-				reg = <3 0 10>;
+				reg = <0x00000003 0x00000000 0x00000010>;
 			};
 
 			fpga@7,0 {
 				compatible = "Walnut-FPGA";
-				reg = <7 0 10>;
-				virtual-reg = <f0300005>;
+				reg = <0x00000007 0x00000000 0x00000010>;
+				virtual-reg = <0xf0300005>;
 			};
 		};
 
@@ -205,35 +207,35 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb405gp-pci", "ibm,plb-pci";
 			primary;
-			reg = <eec00000 8	/* Config space access */
-			       eed80000 4	/* IACK */
-			       eed80000 4	/* Special cycle */
-			       ef480000 40>;	/* Internal registers */
+			reg = <0xeec00000 0x00000008	/* Config space access */
+			       0xeed80000 0x00000004	/* IACK */
+			       0xeed80000 0x00000004	/* Special cycle */
+			       0xef480000 0x00000040>;	/* Internal registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed. Chip supports a second
 			 * IO range but we don't use it for now
 			 */
-			ranges = <02000000 0 80000000 80000000 0 20000000
-				  01000000 0 00000000 e8000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
+				  0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* Walnut has all 4 IRQ pins tied together per slot */
-			interrupt-map-mask = <f800 0 0 0>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
 			interrupt-map = <
 				/* IDSEL 1 */
-				0800 0 0 0 &UIC0 1c 8
+				0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
 
 				/* IDSEL 2 */
-				1000 0 0 0 &UIC0 1d 8
+				0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8
 
 				/* IDSEL 3 */
-				1800 0 0 0 &UIC0 1e 8
+				0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8
 
 				/* IDSEL 4 */
-				2000 0 0 0 &UIC0 1f 8
+				0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts
index b04a52e22bf5..340018cf16b7 100644
--- a/arch/powerpc/boot/dts/warp.dts
+++ b/arch/powerpc/boot/dts/warp.dts
@@ -9,12 +9,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "pika,warp";
 	compatible = "pika,warp";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -28,13 +30,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440EP";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by zImage */
 			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -42,14 +44,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by zImage */
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-440ep","ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -59,22 +61,22 @@
 		compatible = "ibm,uic-440ep","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	SDR0: sdr {
 		compatible = "ibm,sdr-440ep";
-		dcr-reg = <00e 002>;
+		dcr-reg = <0x00e 0x002>;
 	};
 
 	CPR0: cpr {
 		compatible = "ibm,cpr-440ep";
-		dcr-reg = <00c 002>;
+		dcr-reg = <0x00c 0x002>;
 	};
 
 	plb {
@@ -86,86 +88,79 @@
 
 		SDRAM0: sdram {
 			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		DMA0: dma {
 			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
-			dcr-reg = <100 027>;
+			dcr-reg = <0x100 0x027>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <4>;
 			num-rx-chans = <2>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					/*RXEOB*/ 1 &UIC0 b 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
 		};
 
 		POB0: opb {
 		  	compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-		  	ranges = <00000000 0 00000000 80000000
-			          80000000 0 80000000 80000000>;
+		  	ranges = <0x00000000 0x00000000 0x00000000 0x80000000
+			          0x80000000 0x00000000 0x80000000 0x80000000>;
 		  	interrupt-parent = <&UIC1>;
-		  	interrupts = <7 4>;
+		  	interrupts = <0x7 0x4>;
 		  	clock-frequency = <0>; /* Filled in by zImage */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 
 				fpga@2,0 {
 					compatible = "pika,fpga";
-			   		reg = <2 0 2200>;
-					interrupts = <18 8>;
+			   		reg = <0x00000002 0x00000000 0x00001000>;
+					interrupts = <0x18 0x8>;
 					interrupt-parent = <&UIC0>;
 				};
 
+				fpga@2,4000 {
+					compatible = "pika,fpga-sd";
+					reg = <0x00000002 0x00004000 0x00000A00>;
+				};
+
 				nor_flash@0,0 {
-					compatible = "amd,s29gl512n", "cfi-flash";
+					compatible = "amd,s29gl032a", "cfi-flash";
 					bank-width = <2>;
-					reg = <0 0 4000000>;
+					reg = <0x00000000 0x00000000 0x00400000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
-					partition@0 {
-						label = "kernel";
-						reg = <0 180000>;
-					};
-					partition@180000 {
-						label = "root";
-						reg = <180000 3480000>;
-					};
-					partition@3600000 {
-						label = "user";
-						reg = <3600000 900000>;
-					};
-					partition@3f00000 {
+					partition@300000 {
 						label = "fpga";
-						reg = <3f00000 40000>;
+						reg = <0x0030000 0x00040000>;
 					};
-					partition@3f40000 {
+					partition@340000 {
 						label = "env";
-						reg = <3f40000 40000>;
+						reg = <0x0340000 0x00040000>;
 					};
-					partition@3f80000 {
+					partition@380000 {
 						label = "u-boot";
-						reg = <3f80000 80000>;
+						reg = <0x0380000 0x00080000>;
 					};
 				};
 			};
@@ -173,60 +168,80 @@
 			UART0: serial@ef600300 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600300 8>;
-		   		virtual-reg = <ef600300>;
+		   		reg = <0xef600300 0x00000008>;
+		   		virtual-reg = <0xef600300>;
 		   		clock-frequency = <0>; /* Filled in by zImage */
-		   		current-speed = <1c200>;
+		   		current-speed = <115200>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <0 4>;
+		   		interrupts = <0x0 0x4>;
 	   		};
 
 			IIC0: i2c@ef600700 {
 				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
-				reg = <ef600700 14>;
+				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
+				index = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ad7414@4a {
+					compatible = "adi,ad7414";
+					reg = <0x4a>;
+					interrupts = <0x19 0x8>;
+					interrupt-parent = <&UIC0>;
+				};
 			};
 
 			GPIO0: gpio@ef600b00 {
 				compatible = "ibm,gpio-440ep";
-				reg = <ef600b00 48>;
+				reg = <0xef600b00 0x00000048>;
+				#gpio-cells = <2>;
+				gpio-controller;
 			};
 
 			GPIO1: gpio@ef600c00 {
 				compatible = "ibm,gpio-440ep";
-				reg = <ef600c00 48>;
+				reg = <0xef600c00 0x00000048>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				led@31 {
+					compatible = "linux,gpio-led";
+					linux,name = ":green:";
+					gpios = <&GPIO1 0x30 0>;
+				};
 			};
 
 			ZMII0: emac-zmii@ef600d00 {
 				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
-				reg = <ef600d00 c>;
+				reg = <0xef600d00 0x0000000c>;
 			};
 
 			EMAC0: ethernet@ef600e00 {
 				device_type = "network";
 				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1c 4 1d 4>;
-				reg = <ef600e00 70>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0xef600e00 0x00000070>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0 1>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <0>;
 			};
 
 			usb@ef601000 {
 				compatible = "ohci-be";
-				reg = <ef601000 80>;
-				interrupts = <8 1 9 1>;
+				reg = <0xef601000 0x00000080>;
+				interrupts = <0x8 0x1 0x9 0x1>;
 				interrupt-parent = < &UIC1 >;
 			};
 		};
diff --git a/arch/powerpc/boot/dts/yosemite.dts b/arch/powerpc/boot/dts/yosemite.dts
index 0d6d332814e0..e39422aa0d85 100644
--- a/arch/powerpc/boot/dts/yosemite.dts
+++ b/arch/powerpc/boot/dts/yosemite.dts
@@ -9,12 +9,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,yosemite";
 	compatible = "amcc,yosemite","amcc,bamboo";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -32,13 +34,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440EP";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by zImage */
 			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -46,14 +48,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by zImage */
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-440ep","ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -63,22 +65,22 @@
 		compatible = "ibm,uic-440ep","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	SDR0: sdr {
 		compatible = "ibm,sdr-440ep";
-		dcr-reg = <00e 002>;
+		dcr-reg = <0x00e 0x002>;
 	};
 
 	CPR0: cpr {
 		compatible = "ibm,cpr-440ep";
-		dcr-reg = <00c 002>;
+		dcr-reg = <0x00c 0x002>;
 	};
 
 	plb {
@@ -90,29 +92,29 @@
 
 		SDRAM0: sdram {
 			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		DMA0: dma {
 			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
-			dcr-reg = <100 027>;
+			dcr-reg = <0x100 0x027>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <4>;
 			num-rx-chans = <2>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					/*RXEOB*/ 1 &UIC0 b 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
 		};
 
 		POB0: opb {
@@ -122,110 +124,110 @@
 			/* Bamboo is oddball in the 44x world and doesn't use the ERPN
 			 * bits.
 			 */
-			ranges = <00000000 0 00000000 80000000
-			          80000000 0 80000000 80000000>;
+			ranges = <0x00000000 0x00000000 0x00000000 0x80000000
+			          0x80000000 0x00000000 0x80000000 0x80000000>;
 			interrupt-parent = <&UIC1>;
-			interrupts = <7 4>;
+			interrupts = <0x7 0x4>;
 			clock-frequency = <0>; /* Filled in by zImage */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 			};
 
 			UART0: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600300 8>;
-				virtual-reg = <ef600300>;
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <1c200>;
+				current-speed = <115200>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <0 4>;
+				interrupts = <0x0 0x4>;
 			};
 
 			UART1: serial@ef600400 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600400 8>;
-				virtual-reg = <ef600400>;
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
 				clock-frequency = <0>;
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			UART2: serial@ef600500 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600500 8>;
-				virtual-reg = <ef600500>;
+				reg = <0xef600500 0x00000008>;
+				virtual-reg = <0xef600500>;
 				clock-frequency = <0>;
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <3 4>;
+				interrupts = <0x3 0x4>;
 				status = "disabled";
 			};
 
 			UART3: serial@ef600600 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600600 8>;
-				virtual-reg = <ef600600>;
+				reg = <0xef600600 0x00000008>;
+				virtual-reg = <0xef600600>;
 				clock-frequency = <0>;
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <4 4>;
+				interrupts = <0x4 0x4>;
 				status = "disabled";
 			};
 
 			IIC0: i2c@ef600700 {
 				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
-				reg = <ef600700 14>;
+				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600800 {
 				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
-				reg = <ef600800 14>;
+				reg = <0xef600800 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <7 4>;
+				interrupts = <0x7 0x4>;
 			};
 
 			spi@ef600900 {
 				compatible = "amcc,spi-440ep";
-				reg = <ef600900 6>;
-				interrupts = <8 4>;
+				reg = <0xef600900 0x00000006>;
+				interrupts = <0x8 0x4>;
 				interrupt-parent = <&UIC0>;
 			};
 
 			ZMII0: emac-zmii@ef600d00 {
 				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
-				reg = <ef600d00 c>;
+				reg = <0xef600d00 0x0000000c>;
 			};
 
 			EMAC0: ethernet@ef600e00 {
 				device_type = "network";
 				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1c 4 1d 4>;
-				reg = <ef600e00 70>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0xef600e00 0x00000070>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0 1>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <0>;
 			};
@@ -234,26 +236,26 @@
 				device_type = "network";
 				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1e 4 1f 4>;
-				reg = <ef600f00 70>;
+				interrupts = <0x1e 0x4 0x1f 0x4>;
+				reg = <0xef600f00 0x00000070>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <2 3>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <1>;
 			};
 
 			usb@ef601000 {
 				compatible = "ohci-be";
-				reg = <ef601000 80>;
-				interrupts = <8 4 9 4>;
+				reg = <0xef601000 0x00000080>;
+				interrupts = <0x8 0x4 0x9 0x4>;
 				interrupt-parent = < &UIC1 >;
 			};
 		};
@@ -265,35 +267,35 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
 			primary;
-			reg = <0 eec00000 8	/* Config space access */
-			       0 eed00000 4	/* IACK */
-			       0 eed00000 4	/* Special cycle */
-			       0 ef400000 40>;	/* Internal registers */
+			reg = <0x00000000 0xeec00000 0x00000008	/* Config space access */
+			       0x00000000 0xeed00000 0x00000004	/* IACK */
+			       0x00000000 0xeed00000 0x00000004	/* Special cycle */
+			       0x00000000 0xef400000 0x00000040>;	/* Internal registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed. Chip supports a second
 			 * IO range but we don't use it for now
 			 */
-			ranges = <02000000 0 a0000000 0 a0000000 0 20000000
-				  01000000 0 00000000 0 e8000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x20000000
+				  0x01000000 0x00000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* Bamboo has all 4 IRQ pins tied together per slot */
-			interrupt-map-mask = <f800 0 0 0>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
 			interrupt-map = <
 				/* IDSEL 1 */
-				0800 0 0 0 &UIC0 1c 8
+				0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
 
 				/* IDSEL 2 */
-				1000 0 0 0 &UIC0 1b 8
+				0x1000 0x0 0x0 0x0 &UIC0 0x1b 0x8
 
 				/* IDSEL 3 */
-				1800 0 0 0 &UIC0 1a 8
+				0x1800 0x0 0x0 0x0 &UIC0 0x1a 0x8
 
 				/* IDSEL 4 */
-				2000 0 0 0 &UIC0 19 8
+				0x2000 0x0 0x0 0x0 &UIC0 0x19 0x8
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/oflib.c b/arch/powerpc/boot/oflib.c
index 95b8fd69a403..b0ec9cf3eaaf 100644
--- a/arch/powerpc/boot/oflib.c
+++ b/arch/powerpc/boot/oflib.c
@@ -168,8 +168,19 @@ void *of_claim(unsigned long virt, unsigned long size, unsigned long align)
 
 void *of_vmlinux_alloc(unsigned long size)
 {
-	void *p = malloc(size);
-
+	unsigned long start = (unsigned long)_start, end = (unsigned long)_end;
+	void *addr;
+	void *p;
+
+	/* With some older POWER4 firmware we need to claim the area the kernel
+	 * will reside in.  Newer firmwares don't need this so we just ignore
+	 * the return value.
+	 */
+	addr = of_claim(start, end - start, 0);
+	printf("Trying to claim from 0x%lx to 0x%lx (0x%lx) got %p\r\n",
+	       start, end, end - start, addr);
+
+	p = malloc(size);
 	if (!p)
 		fatal("Can't allocate memory for kernel image!\n\r");
 
diff --git a/arch/powerpc/boot/redboot-83xx.c b/arch/powerpc/boot/redboot-83xx.c
new file mode 100644
index 000000000000..79aa9e151fa7
--- /dev/null
+++ b/arch/powerpc/boot/redboot-83xx.c
@@ -0,0 +1,60 @@
+/*
+ * RedBoot firmware support
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ * Copyright (c) 2008 Codehermit
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "redboot.h"
+#include "fsl-soc.h"
+#include "io.h"
+
+static bd_t bd;
+BSS_STACK(4096);
+
+#define MHZ(x)	((x + 500000) / 1000000)
+
+static void platform_fixups(void)
+{
+	void *node;
+
+	dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
+	dt_fixup_mac_addresses(bd.bi_enetaddr);
+	dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 16, bd.bi_busfreq);
+
+	node = finddevice("/soc/cpm/brg");
+	if (node) {
+		printf("BRG clock-frequency <- 0x%x (%dMHz)\r\n",
+		       bd.bi_busfreq, MHZ(bd.bi_busfreq));
+		setprop(node, "clock-frequency",  &bd.bi_busfreq, 4);
+	}
+
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		   unsigned long r6, unsigned long r7)
+{
+	memcpy(&bd, (char *)r3, sizeof(bd));
+
+	if (bd.bi_tag != 0x42444944)
+		return;
+
+	simple_alloc_init(_end,
+			  bd.bi_memstart + bd.bi_memsize - (unsigned long)_end,
+			  32, 64);
+
+	fdt_init(_dtb_start);
+	serial_console_init();
+	platform_ops.fixups = platform_fixups;
+
+	loader_info.cmdline = (char *)bd.bi_cmdline;
+	loader_info.cmdline_len = strlen((char *)bd.bi_cmdline);
+}
diff --git a/arch/powerpc/boot/simpleboot.c b/arch/powerpc/boot/simpleboot.c
index 86cd285bccc6..c58a0dada992 100644
--- a/arch/powerpc/boot/simpleboot.c
+++ b/arch/powerpc/boot/simpleboot.c
@@ -23,6 +23,8 @@
 
 BSS_STACK(4*1024);
 
+extern int platform_specific_init(void) __attribute__((weak));
+
 void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 		   unsigned long r6, unsigned long r7)
 {
@@ -80,5 +82,9 @@ void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 
 	/* prepare the device tree and find the console */
 	fdt_init(_dtb_start);
+
+	if (platform_specific_init)
+		platform_specific_init();
+
 	serial_console_init();
 }
diff --git a/arch/powerpc/boot/virtex.c b/arch/powerpc/boot/virtex.c
new file mode 100644
index 000000000000..f622805f8000
--- /dev/null
+++ b/arch/powerpc/boot/virtex.c
@@ -0,0 +1,100 @@
+/*
+ * The platform specific code for virtex devices since a boot loader is not
+ * always used.
+ *
+ * (C) Copyright 2008 Xilinx, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "io.h"
+#include "stdio.h"
+
+#define UART_DLL		0	/* Out: Divisor Latch Low */
+#define UART_DLM		1	/* Out: Divisor Latch High */
+#define UART_FCR		2	/* Out: FIFO Control Register */
+#define UART_FCR_CLEAR_RCVR 	0x02 	/* Clear the RCVR FIFO */
+#define UART_FCR_CLEAR_XMIT	0x04 	/* Clear the XMIT FIFO */
+#define UART_LCR		3	/* Out: Line Control Register */
+#define UART_MCR		4	/* Out: Modem Control Register */
+#define UART_MCR_RTS		0x02 	/* RTS complement */
+#define UART_MCR_DTR		0x01 	/* DTR complement */
+#define UART_LCR_DLAB		0x80 	/* Divisor latch access bit */
+#define UART_LCR_WLEN8		0x03 	/* Wordlength: 8 bits */
+
+static int virtex_ns16550_console_init(void *devp)
+{
+	unsigned char *reg_base;
+	u32 reg_shift, reg_offset, clk, spd;
+	u16 divisor;
+	int n;
+
+	if (dt_get_virtual_reg(devp, (void **)&reg_base, 1) < 1)
+		return -1;
+
+	n = getprop(devp, "reg-offset", &reg_offset, sizeof(reg_offset));
+	if (n == sizeof(reg_offset))
+		reg_base += reg_offset;
+
+	n = getprop(devp, "reg-shift", &reg_shift, sizeof(reg_shift));
+	if (n != sizeof(reg_shift))
+		reg_shift = 0;
+
+	n = getprop(devp, "current-speed", (void *)&spd, sizeof(spd));
+	if (n != sizeof(spd))
+		spd = 9600;
+
+	/* should there be a default clock rate?*/
+	n = getprop(devp, "clock-frequency", (void *)&clk, sizeof(clk));
+	if (n != sizeof(clk))
+		return -1;
+
+	divisor = clk / (16 * spd);
+
+	/* Access baud rate */
+	out_8(reg_base + (UART_LCR << reg_shift), UART_LCR_DLAB);
+
+	/* Baud rate based on input clock */
+	out_8(reg_base + (UART_DLL << reg_shift), divisor & 0xFF);
+	out_8(reg_base + (UART_DLM << reg_shift), divisor >> 8);
+
+	/* 8 data, 1 stop, no parity */
+	out_8(reg_base + (UART_LCR << reg_shift), UART_LCR_WLEN8);
+
+	/* RTS/DTR */
+	out_8(reg_base + (UART_MCR << reg_shift), UART_MCR_RTS | UART_MCR_DTR);
+
+	/* Clear transmitter and receiver */
+	out_8(reg_base + (UART_FCR << reg_shift),
+				UART_FCR_CLEAR_XMIT | UART_FCR_CLEAR_RCVR);
+	return 0;
+}
+
+/* For virtex, the kernel may be loaded without using a bootloader and if so
+   some UARTs need more setup than is provided in the normal console init
+*/
+int platform_specific_init(void)
+{
+	void *devp;
+	char devtype[MAX_PROP_LEN];
+	char path[MAX_PATH_LEN];
+
+	devp = finddevice("/chosen");
+	if (devp == NULL)
+		return -1;
+
+	if (getprop(devp, "linux,stdout-path", path, MAX_PATH_LEN) > 0) {
+		devp = finddevice(path);
+		if (devp == NULL)
+			return -1;
+
+		if ((getprop(devp, "device_type", devtype, sizeof(devtype)) > 0)
+				&& !strcmp(devtype, "serial")
+				&& (dt_is_compatible(devp, "ns16550")))
+				virtex_ns16550_console_init(devp);
+	}
+	return 0;
+}
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index d6c96d9ab291..644bf9d4ea00 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -138,14 +138,20 @@ objflags=-S
 tmp=$tmpdir/zImage.$$.o
 ksection=.kernel:vmlinux.strip
 isection=.kernel:initrd
+link_address='0x400000'
 
 case "$platform" in
-pmac|pseries|chrp)
+pseries)
+    platformo=$object/of.o
+    link_address='0x4000000'
+    ;;
+pmac|chrp)
     platformo=$object/of.o
     ;;
 coff)
     platformo=$object/of.o
     lds=$object/zImage.coff.lds
+    link_address='0x500000'
     ;;
 miboot|uboot)
     # miboot and U-boot want just the bare bits, not an ELF binary
@@ -171,13 +177,13 @@ cuboot*)
     *-mpc824*)
         platformo=$object/cuboot-824x.o
         ;;
-    *-mpc83*)
+    *-mpc83*|*-asp834x*)
         platformo=$object/cuboot-83xx.o
         ;;
     *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555|*-ksi8560*)
         platformo=$object/cuboot-85xx-cpm2.o
         ;;
-    *-mpc85*|*-tqm8540|*-sbc85*)
+    *-mpc85*|*-tqm85*|*-sbc85*)
         platformo=$object/cuboot-85xx.o
         ;;
     esac
@@ -190,6 +196,7 @@ ps3)
     objflags="-O binary --set-section-flags=.bss=contents,alloc,load,data"
     ksection=.kernel:vmlinux.bin
     isection=.kernel:initrd
+    link_address=''
     ;;
 ep88xc|ep405|ep8248e)
     platformo="$object/fixed-head.o $object/$platform.o"
@@ -200,7 +207,19 @@ adder875-redboot)
     binary=y
     ;;
 simpleboot-virtex405-*)
-    platformo="$object/virtex405-head.o $object/simpleboot.o"
+    platformo="$object/virtex405-head.o $object/simpleboot.o $object/virtex.o"
+    binary=y
+    ;;
+simpleboot-virtex440-*)
+    platformo="$object/simpleboot.o $object/virtex.o"
+    binary=y
+    ;;
+simpleboot-*)
+    platformo="$object/simpleboot.o"
+    binary=y
+    ;;
+asp834x-redboot)
+    platformo="$object/fixed-head.o $object/redboot-83xx.o"
     binary=y
     ;;
 esac
@@ -268,7 +287,10 @@ if [ -n "$dtb" ]; then
 fi
 
 if [ "$platform" != "miboot" ]; then
-    ${CROSS}ld -m elf32ppc -T $lds -o "$ofile" \
+    if [ -n "$link_address" ] ; then
+        text_start="-Ttext $link_address --defsym _start=$link_address"
+    fi
+    ${CROSS}ld -m elf32ppc -T $lds $text_start -o "$ofile" \
 	$platformo $tmp $object/wrapper.a
     rm $tmp
 fi
diff --git a/arch/powerpc/boot/zImage.coff.lds.S b/arch/powerpc/boot/zImage.coff.lds.S
index fe87a90ce7f1..856dc78b14ef 100644
--- a/arch/powerpc/boot/zImage.coff.lds.S
+++ b/arch/powerpc/boot/zImage.coff.lds.S
@@ -3,7 +3,6 @@ ENTRY(_zimage_start_opd)
 EXTERN(_zimage_start_opd)
 SECTIONS
 {
-  . = (5*1024*1024);
   _start = .;
   .text      :
   {
diff --git a/arch/powerpc/boot/zImage.lds.S b/arch/powerpc/boot/zImage.lds.S
index f6e380fdb388..0962d62bdb50 100644
--- a/arch/powerpc/boot/zImage.lds.S
+++ b/arch/powerpc/boot/zImage.lds.S
@@ -3,7 +3,6 @@ ENTRY(_zimage_start)
 EXTERN(_zimage_start)
 SECTIONS
 {
-  . = (4*1024*1024);
   _start = .;
   .text      :
   {