[POWERPC] Remove the broken Gemini support

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 0 insertions, 90 deletions

diff --git a/arch/ppc/platforms/gemini_prom.S b/arch/ppc/platforms/gemini_prom.S
deleted file mode 100644
index e8c84d24f01f..000000000000
--- a/arch/ppc/platforms/gemini_prom.S
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- *  Not really prom support code (yet), but sort of anti-prom code.  The current
- *  bootloader does a number of things it shouldn't and doesn't do things that it
- *  should.  The stuff in here is mainly a hodge-podge collection of setup code
- *  to get the board up and running.
- *    ---Dan
- */
-
-#include <asm/reg.h>
-#include <asm/page.h>
-#include <platforms/gemini.h>
-#include <asm/ppc_asm.h>
-
-/*
- *  On 750's the MMU is on when Linux is booted, so we need to clear out the
- *  bootloader's BAT settings, make sure we're in supervisor state (gotcha!),
- *  and turn off the MMU.
- *
- */
-
-_GLOBAL(gemini_prom_init)
-#ifdef CONFIG_SMP
-	/* Since the MMU's on, get stuff in rom space that we'll need */
-	lis	r4,GEMINI_CPUSTAT@h
-	ori	r4,r4,GEMINI_CPUSTAT@l
-	lbz	r5,0(r4)
-	andi.	r5,r5,3
-	mr	r24,r5		/* cpu # used later on */
-#endif
-	mfmsr	r4
-	li	r3,MSR_PR	/* ensure supervisor! */
-	ori	r3,r3,MSR_IR|MSR_DR
-	andc	r4,r4,r3
-	mtmsr	r4
-	isync
-#if 0
-	/* zero out the bats now that the MMU is off */
-prom_no_mmu:	
-	li	r3,0
-        mtspr   SPRN_IBAT0U,r3
-        mtspr   SPRN_IBAT0L,r3
-        mtspr   SPRN_IBAT1U,r3
-        mtspr   SPRN_IBAT1L,r3
-        mtspr   SPRN_IBAT2U,r3
-        mtspr   SPRN_IBAT2L,r3
-        mtspr   SPRN_IBAT3U,r3
-        mtspr   SPRN_IBAT3L,r3
-
-        mtspr   SPRN_DBAT0U,r3
-        mtspr   SPRN_DBAT0L,r3
-        mtspr   SPRN_DBAT1U,r3
-        mtspr   SPRN_DBAT1L,r3
-        mtspr   SPRN_DBAT2U,r3
-	mtspr   SPRN_DBAT2L,r3
-        mtspr   SPRN_DBAT3U,r3
-        mtspr   SPRN_DBAT3L,r3
-#endif
-
-	/* the bootloader (as far as I'm currently aware) doesn't mess with page
-	   tables, but since we're already here, might as well zap these, too */
-	li	r4,0
-	mtspr	SPRN_SDR1,r4
-
-	li	r4,16
-	mtctr	r4
-	li	r3,0
-	li	r4,0
-3:	mtsrin	r3,r4
-	addi	r3,r3,1
-	bdnz	3b
-
-#ifdef CONFIG_SMP
-	/* The 750 book (and Mot/IBM support) says that this will "assist" snooping
-	   when in SMP.  Not sure yet whether this should stay or leave... */
-	mfspr	r4,SPRN_HID0
-	ori	r4,r4,HID0_ABE
-	mtspr	SPRN_HID0,r4
-	sync
-#endif /* CONFIG_SMP */
-	blr
-
-/*  apparently, SMon doesn't pay attention to HID0[SRST].  Disable the MMU and
-    branch to 0xfff00100 */
-_GLOBAL(_gemini_reboot)
-	lis	r5,GEMINI_BOOT_INIT@h
-	ori	r5,r5,GEMINI_BOOT_INIT@l
-	li	r6,MSR_IP
-	mtspr	SPRN_SRR0,r5
-	mtspr	SPRN_SRR1,r6
-	rfi