Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 640 insertions, 0 deletions

diff --git a/arch/ppc/platforms/pmac_smp.c b/arch/ppc/platforms/pmac_smp.c
new file mode 100644
index 000000000000..2b88745576a0
--- /dev/null
+++ b/arch/ppc/platforms/pmac_smp.c
@@ -0,0 +1,640 @@
+/*
+ * SMP support for power macintosh.
+ *
+ * We support both the old "powersurge" SMP architecture
+ * and the current Core99 (G4 PowerMac) machines.
+ *
+ * Note that we don't support the very first rev. of
+ * Apple/DayStar 2 CPUs board, the one with the funky
+ * watchdog. Hopefully, none of these should be there except
+ * maybe internally to Apple. I should probably still add some
+ * code to detect this card though and disable SMP. --BenH.
+ *
+ * Support Macintosh G4 SMP by Troy Benjegerdes (hozer@drgw.net)
+ * and Ben Herrenschmidt <benh@kernel.crashing.org>.
+ *
+ * Support for DayStar quad CPU cards
+ * Copyright (C) XLR8, Inc. 1994-2000
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/hardirq.h>
+
+#include <asm/ptrace.h>
+#include <asm/atomic.h>
+#include <asm/irq.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/smp.h>
+#include <asm/residual.h>
+#include <asm/machdep.h>
+#include <asm/pmac_feature.h>
+#include <asm/time.h>
+#include <asm/open_pic.h>
+#include <asm/cacheflush.h>
+#include <asm/keylargo.h>
+
+/*
+ * Powersurge (old powermac SMP) support.
+ */
+
+extern void __secondary_start_psurge(void);
+extern void __secondary_start_psurge2(void);	/* Temporary horrible hack */
+extern void __secondary_start_psurge3(void);	/* Temporary horrible hack */
+
+/* Addresses for powersurge registers */
+#define HAMMERHEAD_BASE		0xf8000000
+#define HHEAD_CONFIG		0x90
+#define HHEAD_SEC_INTR		0xc0
+
+/* register for interrupting the primary processor on the powersurge */
+/* N.B. this is actually the ethernet ROM! */
+#define PSURGE_PRI_INTR		0xf3019000
+
+/* register for storing the start address for the secondary processor */
+/* N.B. this is the PCI config space address register for the 1st bridge */
+#define PSURGE_START		0xf2800000
+
+/* Daystar/XLR8 4-CPU card */
+#define PSURGE_QUAD_REG_ADDR	0xf8800000
+
+#define PSURGE_QUAD_IRQ_SET	0
+#define PSURGE_QUAD_IRQ_CLR	1
+#define PSURGE_QUAD_IRQ_PRIMARY	2
+#define PSURGE_QUAD_CKSTOP_CTL	3
+#define PSURGE_QUAD_PRIMARY_ARB	4
+#define PSURGE_QUAD_BOARD_ID	6
+#define PSURGE_QUAD_WHICH_CPU	7
+#define PSURGE_QUAD_CKSTOP_RDBK	8
+#define PSURGE_QUAD_RESET_CTL	11
+
+#define PSURGE_QUAD_OUT(r, v)	(out_8(quad_base + ((r) << 4) + 4, (v)))
+#define PSURGE_QUAD_IN(r)	(in_8(quad_base + ((r) << 4) + 4) & 0x0f)
+#define PSURGE_QUAD_BIS(r, v)	(PSURGE_QUAD_OUT((r), PSURGE_QUAD_IN(r) | (v)))
+#define PSURGE_QUAD_BIC(r, v)	(PSURGE_QUAD_OUT((r), PSURGE_QUAD_IN(r) & ~(v)))
+
+/* virtual addresses for the above */
+static volatile u8 *hhead_base;
+static volatile u8 *quad_base;
+static volatile u32 *psurge_pri_intr;
+static volatile u8 *psurge_sec_intr;
+static volatile u32 *psurge_start;
+
+/* values for psurge_type */
+#define PSURGE_NONE		-1
+#define PSURGE_DUAL		0
+#define PSURGE_QUAD_OKEE	1
+#define PSURGE_QUAD_COTTON	2
+#define PSURGE_QUAD_ICEGRASS	3
+
+/* what sort of powersurge board we have */
+static int psurge_type = PSURGE_NONE;
+
+/* L2 and L3 cache settings to pass from CPU0 to CPU1 */
+volatile static long int core99_l2_cache;
+volatile static long int core99_l3_cache;
+
+/* Timebase freeze GPIO */
+static unsigned int core99_tb_gpio;
+
+/* Sync flag for HW tb sync */
+static volatile int sec_tb_reset = 0;
+
+static void __init core99_init_caches(int cpu)
+{
+	if (!cpu_has_feature(CPU_FTR_L2CR))
+		return;
+
+	if (cpu == 0) {
+		core99_l2_cache = _get_L2CR();
+		printk("CPU0: L2CR is %lx\n", core99_l2_cache);
+	} else {
+		printk("CPU%d: L2CR was %lx\n", cpu, _get_L2CR());
+		_set_L2CR(0);
+		_set_L2CR(core99_l2_cache);
+		printk("CPU%d: L2CR set to %lx\n", cpu, core99_l2_cache);
+	}
+
+	if (!cpu_has_feature(CPU_FTR_L3CR))
+		return;
+
+	if (cpu == 0){
+		core99_l3_cache = _get_L3CR();
+		printk("CPU0: L3CR is %lx\n", core99_l3_cache);
+	} else {
+		printk("CPU%d: L3CR was %lx\n", cpu, _get_L3CR());
+		_set_L3CR(0);
+		_set_L3CR(core99_l3_cache);
+		printk("CPU%d: L3CR set to %lx\n", cpu, core99_l3_cache);
+	}
+}
+
+/*
+ * Set and clear IPIs for powersurge.
+ */
+static inline void psurge_set_ipi(int cpu)
+{
+	if (psurge_type == PSURGE_NONE)
+		return;
+	if (cpu == 0)
+		in_be32(psurge_pri_intr);
+	else if (psurge_type == PSURGE_DUAL)
+		out_8(psurge_sec_intr, 0);
+	else
+		PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_SET, 1 << cpu);
+}
+
+static inline void psurge_clr_ipi(int cpu)
+{
+	if (cpu > 0) {
+		switch(psurge_type) {
+		case PSURGE_DUAL:
+			out_8(psurge_sec_intr, ~0);
+		case PSURGE_NONE:
+			break;
+		default:
+			PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_CLR, 1 << cpu);
+		}
+	}
+}
+
+/*
+ * On powersurge (old SMP powermac architecture) we don't have
+ * separate IPIs for separate messages like openpic does.  Instead
+ * we have a bitmap for each processor, where a 1 bit means that
+ * the corresponding message is pending for that processor.
+ * Ideally each cpu's entry would be in a different cache line.
+ *  -- paulus.
+ */
+static unsigned long psurge_smp_message[NR_CPUS];
+
+void __pmac psurge_smp_message_recv(struct pt_regs *regs)
+{
+	int cpu = smp_processor_id();
+	int msg;
+
+	/* clear interrupt */
+	psurge_clr_ipi(cpu);
+
+	if (num_online_cpus() < 2)
+		return;
+
+	/* make sure there is a message there */
+	for (msg = 0; msg < 4; msg++)
+		if (test_and_clear_bit(msg, &psurge_smp_message[cpu]))
+			smp_message_recv(msg, regs);
+}
+
+irqreturn_t __pmac psurge_primary_intr(int irq, void *d, struct pt_regs *regs)
+{
+	psurge_smp_message_recv(regs);
+	return IRQ_HANDLED;
+}
+
+static void __pmac smp_psurge_message_pass(int target, int msg, unsigned long data,
+					   int wait)
+{
+	int i;
+
+	if (num_online_cpus() < 2)
+		return;
+
+	for (i = 0; i < NR_CPUS; i++) {
+		if (!cpu_online(i))
+			continue;
+		if (target == MSG_ALL
+		    || (target == MSG_ALL_BUT_SELF && i != smp_processor_id())
+		    || target == i) {
+			set_bit(msg, &psurge_smp_message[i]);
+			psurge_set_ipi(i);
+		}
+	}
+}
+
+/*
+ * Determine a quad card presence. We read the board ID register, we
+ * force the data bus to change to something else, and we read it again.
+ * It it's stable, then the register probably exist (ugh !)
+ */
+static int __init psurge_quad_probe(void)
+{
+	int type;
+	unsigned int i;
+
+	type = PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID);
+	if (type < PSURGE_QUAD_OKEE || type > PSURGE_QUAD_ICEGRASS
+	    || type != PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID))
+		return PSURGE_DUAL;
+
+	/* looks OK, try a slightly more rigorous test */
+	/* bogus is not necessarily cacheline-aligned,
+	   though I don't suppose that really matters.  -- paulus */
+	for (i = 0; i < 100; i++) {
+		volatile u32 bogus[8];
+		bogus[(0+i)%8] = 0x00000000;
+		bogus[(1+i)%8] = 0x55555555;
+		bogus[(2+i)%8] = 0xFFFFFFFF;
+		bogus[(3+i)%8] = 0xAAAAAAAA;
+		bogus[(4+i)%8] = 0x33333333;
+		bogus[(5+i)%8] = 0xCCCCCCCC;
+		bogus[(6+i)%8] = 0xCCCCCCCC;
+		bogus[(7+i)%8] = 0x33333333;
+		wmb();
+		asm volatile("dcbf 0,%0" : : "r" (bogus) : "memory");
+		mb();
+		if (type != PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID))
+			return PSURGE_DUAL;
+	}
+	return type;
+}
+
+static void __init psurge_quad_init(void)
+{
+	int procbits;
+
+	if (ppc_md.progress) ppc_md.progress("psurge_quad_init", 0x351);
+	procbits = ~PSURGE_QUAD_IN(PSURGE_QUAD_WHICH_CPU);
+	if (psurge_type == PSURGE_QUAD_ICEGRASS)
+		PSURGE_QUAD_BIS(PSURGE_QUAD_RESET_CTL, procbits);
+	else
+		PSURGE_QUAD_BIC(PSURGE_QUAD_CKSTOP_CTL, procbits);
+	mdelay(33);
+	out_8(psurge_sec_intr, ~0);
+	PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_CLR, procbits);
+	PSURGE_QUAD_BIS(PSURGE_QUAD_RESET_CTL, procbits);
+	if (psurge_type != PSURGE_QUAD_ICEGRASS)
+		PSURGE_QUAD_BIS(PSURGE_QUAD_CKSTOP_CTL, procbits);
+	PSURGE_QUAD_BIC(PSURGE_QUAD_PRIMARY_ARB, procbits);
+	mdelay(33);
+	PSURGE_QUAD_BIC(PSURGE_QUAD_RESET_CTL, procbits);
+	mdelay(33);
+	PSURGE_QUAD_BIS(PSURGE_QUAD_PRIMARY_ARB, procbits);
+	mdelay(33);
+}
+
+static int __init smp_psurge_probe(void)
+{
+	int i, ncpus;
+
+	/* We don't do SMP on the PPC601 -- paulus */
+	if (PVR_VER(mfspr(SPRN_PVR)) == 1)
+		return 1;
+
+	/*
+	 * The powersurge cpu board can be used in the generation
+	 * of powermacs that have a socket for an upgradeable cpu card,
+	 * including the 7500, 8500, 9500, 9600.
+	 * The device tree doesn't tell you if you have 2 cpus because
+	 * OF doesn't know anything about the 2nd processor.
+	 * Instead we look for magic bits in magic registers,
+	 * in the hammerhead memory controller in the case of the
+	 * dual-cpu powersurge board.  -- paulus.
+	 */
+	if (find_devices("hammerhead") == NULL)
+		return 1;
+
+	hhead_base = ioremap(HAMMERHEAD_BASE, 0x800);
+	quad_base = ioremap(PSURGE_QUAD_REG_ADDR, 1024);
+	psurge_sec_intr = hhead_base + HHEAD_SEC_INTR;
+
+	psurge_type = psurge_quad_probe();
+	if (psurge_type != PSURGE_DUAL) {
+		psurge_quad_init();
+		/* All released cards using this HW design have 4 CPUs */
+		ncpus = 4;
+	} else {
+		iounmap((void *) quad_base);
+		if ((in_8(hhead_base + HHEAD_CONFIG) & 0x02) == 0) {
+			/* not a dual-cpu card */
+			iounmap((void *) hhead_base);
+			psurge_type = PSURGE_NONE;
+			return 1;
+		}
+		ncpus = 2;
+	}
+
+	psurge_start = ioremap(PSURGE_START, 4);
+	psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4);
+
+	/* this is not actually strictly necessary -- paulus. */
+	for (i = 1; i < ncpus; ++i)
+		smp_hw_index[i] = i;
+
+	if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352);
+
+	return ncpus;
+}
+
+static void __init smp_psurge_kick_cpu(int nr)
+{
+	void (*start)(void) = __secondary_start_psurge;
+	unsigned long a;
+
+	/* may need to flush here if secondary bats aren't setup */
+	for (a = KERNELBASE; a < KERNELBASE + 0x800000; a += 32)
+		asm volatile("dcbf 0,%0" : : "r" (a) : "memory");
+	asm volatile("sync");
+
+	if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu", 0x353);
+
+	/* setup entry point of secondary processor */
+	switch (nr) {
+	case 2:
+		start = __secondary_start_psurge2;
+		break;
+	case 3:
+		start = __secondary_start_psurge3;
+		break;
+	}
+
+	out_be32(psurge_start, __pa(start));
+	mb();
+
+	psurge_set_ipi(nr);
+	udelay(10);
+	psurge_clr_ipi(nr);
+
+	if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354);
+}
+
+/*
+ * With the dual-cpu powersurge board, the decrementers and timebases
+ * of both cpus are frozen after the secondary cpu is started up,
+ * until we give the secondary cpu another interrupt.  This routine
+ * uses this to get the timebases synchronized.
+ *  -- paulus.
+ */
+static void __init psurge_dual_sync_tb(int cpu_nr)
+{
+	int t;
+
+	set_dec(tb_ticks_per_jiffy);
+	set_tb(0, 0);
+	last_jiffy_stamp(cpu_nr) = 0;
+
+	if (cpu_nr > 0) {
+		mb();
+		sec_tb_reset = 1;
+		return;
+	}
+
+	/* wait for the secondary to have reset its TB before proceeding */
+	for (t = 10000000; t > 0 && !sec_tb_reset; --t)
+		;
+
+	/* now interrupt the secondary, starting both TBs */
+	psurge_set_ipi(1);
+
+	smp_tb_synchronized = 1;
+}
+
+static struct irqaction psurge_irqaction = {
+	.handler = psurge_primary_intr,
+	.flags = SA_INTERRUPT,
+	.mask = CPU_MASK_NONE,
+	.name = "primary IPI",
+};
+
+static void __init smp_psurge_setup_cpu(int cpu_nr)
+{
+
+	if (cpu_nr == 0) {
+		/* If we failed to start the second CPU, we should still
+		 * send it an IPI to start the timebase & DEC or we might
+		 * have them stuck.
+		 */
+		if (num_online_cpus() < 2) {
+			if (psurge_type == PSURGE_DUAL)
+				psurge_set_ipi(1);
+			return;
+		}
+		/* reset the entry point so if we get another intr we won't
+		 * try to startup again */
+		out_be32(psurge_start, 0x100);
+		if (setup_irq(30, &psurge_irqaction))
+			printk(KERN_ERR "Couldn't get primary IPI interrupt");
+	}
+
+	if (psurge_type == PSURGE_DUAL)
+		psurge_dual_sync_tb(cpu_nr);
+}
+
+void __init smp_psurge_take_timebase(void)
+{
+	/* Dummy implementation */
+}
+
+void __init smp_psurge_give_timebase(void)
+{
+	/* Dummy implementation */
+}
+
+static int __init smp_core99_probe(void)
+{
+#ifdef CONFIG_6xx
+	extern int powersave_nap;
+#endif
+	struct device_node *cpus, *firstcpu;
+	int i, ncpus = 0, boot_cpu = -1;
+	u32 *tbprop;
+
+	if (ppc_md.progress) ppc_md.progress("smp_core99_probe", 0x345);
+	cpus = firstcpu = find_type_devices("cpu");
+	while(cpus != NULL) {
+		u32 *regprop = (u32 *)get_property(cpus, "reg", NULL);
+		char *stateprop = (char *)get_property(cpus, "state", NULL);
+		if (regprop != NULL && stateprop != NULL &&
+		    !strncmp(stateprop, "running", 7))
+			boot_cpu = *regprop;
+		++ncpus;
+		cpus = cpus->next;
+	}
+	if (boot_cpu == -1)
+		printk(KERN_WARNING "Couldn't detect boot CPU !\n");
+	if (boot_cpu != 0)
+		printk(KERN_WARNING "Boot CPU is %d, unsupported setup !\n", boot_cpu);
+
+	if (machine_is_compatible("MacRISC4")) {
+		extern struct smp_ops_t core99_smp_ops;
+
+		core99_smp_ops.take_timebase = smp_generic_take_timebase;
+		core99_smp_ops.give_timebase = smp_generic_give_timebase;
+	} else {
+		if (firstcpu != NULL)
+			tbprop = (u32 *)get_property(firstcpu, "timebase-enable", NULL);
+		if (tbprop)
+			core99_tb_gpio = *tbprop;
+		else
+			core99_tb_gpio = KL_GPIO_TB_ENABLE;
+	}
+
+	if (ncpus > 1) {
+		openpic_request_IPIs();
+		for (i = 1; i < ncpus; ++i)
+			smp_hw_index[i] = i;
+#ifdef CONFIG_6xx
+		powersave_nap = 0;
+#endif
+		core99_init_caches(0);
+	}
+
+	return ncpus;
+}
+
+static void __init smp_core99_kick_cpu(int nr)
+{
+	unsigned long save_vector, new_vector;
+	unsigned long flags;
+
+	volatile unsigned long *vector
+		 = ((volatile unsigned long *)(KERNELBASE+0x100));
+	if (nr < 1 || nr > 3)
+		return;
+	if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu", 0x346);
+
+	local_irq_save(flags);
+	local_irq_disable();
+
+	/* Save reset vector */
+	save_vector = *vector;
+
+	/* Setup fake reset vector that does	
+	 *   b __secondary_start_psurge - KERNELBASE
+	 */
+	switch(nr) {
+		case 1:
+			new_vector = (unsigned long)__secondary_start_psurge;
+			break;
+		case 2:
+			new_vector = (unsigned long)__secondary_start_psurge2;
+			break;
+		case 3:
+			new_vector = (unsigned long)__secondary_start_psurge3;
+			break;
+	}
+	*vector = 0x48000002 + new_vector - KERNELBASE;
+
+	/* flush data cache and inval instruction cache */
+	flush_icache_range((unsigned long) vector, (unsigned long) vector + 4);
+
+	/* Put some life in our friend */
+	pmac_call_feature(PMAC_FTR_RESET_CPU, NULL, nr, 0);
+
+	/* FIXME: We wait a bit for the CPU to take the exception, I should
+	 * instead wait for the entry code to set something for me. Well,
+	 * ideally, all that crap will be done in prom.c and the CPU left
+	 * in a RAM-based wait loop like CHRP.
+	 */
+	mdelay(1);
+
+	/* Restore our exception vector */
+	*vector = save_vector;
+	flush_icache_range((unsigned long) vector, (unsigned long) vector + 4);
+
+	local_irq_restore(flags);
+	if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu done", 0x347);
+}
+
+static void __init smp_core99_setup_cpu(int cpu_nr)
+{
+	/* Setup L2/L3 */
+	if (cpu_nr != 0)
+		core99_init_caches(cpu_nr);
+
+	/* Setup openpic */
+	do_openpic_setup_cpu();
+
+	if (cpu_nr == 0) {
+#ifdef CONFIG_POWER4
+		extern void g5_phy_disable_cpu1(void);
+
+		/* If we didn't start the second CPU, we must take
+		 * it off the bus
+		 */
+		if (machine_is_compatible("MacRISC4") &&
+		    num_online_cpus() < 2)		
+			g5_phy_disable_cpu1();
+#endif /* CONFIG_POWER4 */
+		if (ppc_md.progress) ppc_md.progress("core99_setup_cpu 0 done", 0x349);
+	}
+}
+
+void __init smp_core99_take_timebase(void)
+{
+	/* Secondary processor "takes" the timebase by freezing
+	 * it, resetting its local TB and telling CPU 0 to go on
+	 */
+	pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 4);
+	pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, core99_tb_gpio, 0);
+	mb();
+
+	set_dec(tb_ticks_per_jiffy);
+	set_tb(0, 0);
+	last_jiffy_stamp(smp_processor_id()) = 0;
+
+	mb();
+       	sec_tb_reset = 1;
+}
+
+void __init smp_core99_give_timebase(void)
+{
+	unsigned int t;
+
+	/* Primary processor waits for secondary to have frozen
+	 * the timebase, resets local TB, and kick timebase again
+	 */
+	/* wait for the secondary to have reset its TB before proceeding */
+	for (t = 1000; t > 0 && !sec_tb_reset; --t)
+		udelay(1000);
+	if (t == 0)
+		printk(KERN_WARNING "Timeout waiting sync on second CPU\n");
+
+       	set_dec(tb_ticks_per_jiffy);
+	set_tb(0, 0);
+	last_jiffy_stamp(smp_processor_id()) = 0;
+	mb();
+
+	/* Now, restart the timebase by leaving the GPIO to an open collector */
+       	pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 0);
+        pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, core99_tb_gpio, 0);
+
+	smp_tb_synchronized = 1;
+}
+
+
+/* PowerSurge-style Macs */
+struct smp_ops_t psurge_smp_ops __pmacdata = {
+	.message_pass	= smp_psurge_message_pass,
+	.probe		= smp_psurge_probe,
+	.kick_cpu	= smp_psurge_kick_cpu,
+	.setup_cpu	= smp_psurge_setup_cpu,
+	.give_timebase	= smp_psurge_give_timebase,
+	.take_timebase	= smp_psurge_take_timebase,
+};
+
+/* Core99 Macs (dual G4s) */
+struct smp_ops_t core99_smp_ops __pmacdata = {
+	.message_pass	= smp_openpic_message_pass,
+	.probe		= smp_core99_probe,
+	.kick_cpu	= smp_core99_kick_cpu,
+	.setup_cpu	= smp_core99_setup_cpu,
+	.give_timebase	= smp_core99_give_timebase,
+	.take_timebase	= smp_core99_take_timebase,
+};