Merge tag 'gpio-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.8 kernel cycle.  The big
  news is the completion of the chardev ABI which I'm very happy about
  and apart from that it's an ordinary, quite busy cycle.  The details
  are below.

  The patches are tested in linux-next for some time, patches to other
  subsystem mostly have ACKs.

  I got overly ambitious with configureing lines as input for IRQ lines
  but it turns out that some controllers have their interrupt-enable and
  input-enabling in orthogonal settings so the assumption that all IRQ
  lines are input lines does not hold.  Oh well, revert and back to the
  drawing board with that.

  Core changes:

   - The big item is of course the completion of the character device
     ABI.  It has now replaced and surpassed the former unmaintainable
     sysfs ABI: we can now hammer (bitbang) individual lines or sets of
     lines and read individual lines or sets of lines from userspace,
     and we can also register to listen to GPIO events from userspace.

     As a tie-in we have two new tools in tools/gpio: gpio-hammer and
     gpio-event-mon that illustrate the proper use of the new ABI.  As
     someone said: the wild west days of GPIO are now over.

   - Continued to remove the pointless ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB
     Kconfig symbols.  I'm patching hexagon, openrisc, powerpc, sh,
     unicore, ia64 and microblaze.  These are either ACKed by their
     maintainers or patched anyways after a grace period and no response
     from maintainers.

     Some archs (ARM) come in from their trees, and others (x86) are
     still not fixed, so I might send a second pull request to root it
     out later in this merge window, or just defer to v4.9.

   - The GPIO tools are moved to the tools build system.

  New drivers:

   - New driver for the MAX77620/MAX20024.

   - New driver for the Intel Merrifield.

   - Enabled PCA953x for the TI PCA9536.

   - Enabled PCA953x for the Intel Edison.

   - Enabled R8A7792 in the RCAR driver.

  Driver improvements:

   - The STMPE and F7188x now supports the .get_direction() callback.

   - The Xilinx driver supports setting multiple lines at once.

   - ACPI support for the Vulcan GPIO controller.

   - The MMIO GPIO driver supports device tree probing.

   - The Acer One 10 is supported through the _DEP ACPI attribute.

  Cleanups:

   - A major cleanup of the OF/DT support code.  It is way easier to
     read and understand now, probably this improves performance too.

   - Drop a few redundant .owner assignments.

   - Remove CLPS711x boardfile support: we are 100% DT"

* tag 'gpio-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (67 commits)
  MAINTAINERS: Add INTEL MERRIFIELD GPIO entry
  gpio: dwapb: add missing fwnode_handle_put() in dwapb_gpio_get_pdata()
  gpio: merrifield: Protect irq_ack() and gpio_set() by lock
  gpio: merrifield: Introduce GPIO driver to support Merrifield
  gpio: intel-mid: Make it depend to X86_INTEL_MID
  gpio: intel-mid: Sort header block alphabetically
  gpio: intel-mid: Remove potentially harmful code
  gpio: rcar: add R8A7792 support
  gpiolib: remove duplicated include from gpiolib.c
  Revert "gpio: convince line to become input in irq helper"
  gpiolib: of_find_gpio(): Don't discard errors
  gpio: of: Allow overriding the device node
  gpio: free handles in fringe cases
  gpio: tps65218: Add platform_device_id table
  gpio: max77620: get gpio value based on direction
  gpio: lynxpoint: avoid potential warning on error path
  tools/gpio: add install section
  tools/gpio: move to tools buildsystem
  gpio: intel-mid: switch to devm_gpiochip_add_data()
  gpio: 74x164: Use spi_write() helper instead of open coding
  ...

4 files changed, 13 insertions, 23 deletions

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index e803a836cb7c..0d5f3a9bb315 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -264,7 +264,6 @@ config CPU_SUBTYPE_SH7203
 	select CPU_HAS_FPU
 	select SYS_SUPPORTS_SH_CMT
 	select SYS_SUPPORTS_SH_MTU2
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select PINCTRL
 
 config CPU_SUBTYPE_SH7206
@@ -353,7 +352,6 @@ config CPU_SUBTYPE_SH7720
 	select CPU_SH3
 	select CPU_HAS_DSP
 	select SYS_SUPPORTS_SH_CMT
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select USB_OHCI_SH if USB_OHCI_HCD
 	select PINCTRL
 	help
@@ -419,7 +417,6 @@ config CPU_SUBTYPE_SH7723
 	select ARCH_SHMOBILE
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_SH_CMT
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select PINCTRL
 	help
 	  Select SH7723 if you have an SH-MobileR2 CPU.
@@ -431,7 +428,6 @@ config CPU_SUBTYPE_SH7724
 	select ARCH_SHMOBILE
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_SH_CMT
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select PINCTRL
 	help
 	  Select SH7724 if you have an SH-MobileR2R CPU.
@@ -440,7 +436,6 @@ config CPU_SUBTYPE_SH7734
 	bool "Support SH7734 processor"
 	select CPU_SH4A
 	select CPU_SHX2
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select PINCTRL
 	help
 	  Select SH7734 if you have a SH4A SH7734 CPU.
@@ -449,7 +444,6 @@ config CPU_SUBTYPE_SH7757
 	bool "Support SH7757 processor"
 	select CPU_SH4A
 	select CPU_SHX2
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select PINCTRL
 	help
 	  Select SH7757 if you have a SH4A SH7757 CPU.
@@ -475,7 +469,6 @@ config CPU_SUBTYPE_SH7785
 	select CPU_SHX2
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_NUMA
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select PINCTRL
 
 config CPU_SUBTYPE_SH7786
@@ -484,7 +477,6 @@ config CPU_SUBTYPE_SH7786
 	select CPU_SHX3
 	select CPU_HAS_PTEAEX
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select USB_OHCI_SH if USB_OHCI_HCD
 	select USB_EHCI_SH if USB_EHCI_HCD
 	select PINCTRL
@@ -494,7 +486,7 @@ config CPU_SUBTYPE_SHX3
 	select CPU_SH4A
 	select CPU_SHX3
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select PINCTRL
 
 # SH4AL-DSP Processor Support
@@ -513,7 +505,6 @@ config CPU_SUBTYPE_SH7722
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_NUMA
 	select SYS_SUPPORTS_SH_CMT
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select PINCTRL
 
 config CPU_SUBTYPE_SH7366
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 5e52d5362292..e0db04664e2e 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -70,7 +70,7 @@ config SH_7724_SOLUTION_ENGINE
 	bool "SolutionEngine7724"
 	select SOLUTION_ENGINE
 	depends on CPU_SUBTYPE_SH7724
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select SND_SOC_AK4642 if SND_SIMPLE_CARD
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	help
@@ -174,7 +174,6 @@ config SH_SDK7786
 	depends on CPU_SUBTYPE_SH7786
 	select SYS_SUPPORTS_PCI
 	select NO_IOPORT_MAP if !PCI
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select HAVE_SRAM_POOL
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	help
@@ -190,7 +189,7 @@ config SH_HIGHLANDER
 config SH_SH7757LCR
 	bool "SH7757LCR"
 	depends on CPU_SUBTYPE_SH7757
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 
 config SH_SH7785LCR
@@ -217,14 +216,14 @@ config SH_SH7785LCR_PT
 config SH_URQUELL
 	bool "Urquell"
 	depends on CPU_SUBTYPE_SH7786
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select SYS_SUPPORTS_PCI
 	select NO_IOPORT_MAP if !PCI
 
 config SH_MIGOR
 	bool "Migo-R"
 	depends on CPU_SUBTYPE_SH7722
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	help
 	  Select Migo-R if configuring for the SH7722 Migo-R platform
@@ -233,7 +232,7 @@ config SH_MIGOR
 config SH_AP325RXA
 	bool "AP-325RXA"
 	depends on CPU_SUBTYPE_SH7723
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	help
 	  Renesas "AP-325RXA" support.
@@ -242,7 +241,7 @@ config SH_AP325RXA
 config SH_KFR2R09
 	bool "KFR2R09"
 	depends on CPU_SUBTYPE_SH7724
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	help
 	  "Kit For R2R for 2009" support.
@@ -250,7 +249,7 @@ config SH_KFR2R09
 config SH_ECOVEC
 	bool "EcoVec"
 	depends on CPU_SUBTYPE_SH7724
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select SND_SOC_DA7210 if SND_SIMPLE_CARD
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	help
@@ -327,7 +326,7 @@ config SH_X3PROTO
 config SH_MAGIC_PANEL_R2
 	bool "Magic Panel R2"
 	depends on CPU_SUBTYPE_SH7720
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	help
 	  Select Magic Panel R2 if configuring for Magic Panel R2.
diff --git a/arch/sh/boards/mach-highlander/Kconfig b/arch/sh/boards/mach-highlander/Kconfig
index def49cc0a7b9..42f5589b4bf3 100644
--- a/arch/sh/boards/mach-highlander/Kconfig
+++ b/arch/sh/boards/mach-highlander/Kconfig
@@ -18,7 +18,7 @@ config SH_R7780MP
 config SH_R7785RP
 	bool "R7785RP board support"
 	depends on CPU_SUBTYPE_SH7785
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 
 endchoice
 
diff --git a/arch/sh/boards/mach-rsk/Kconfig b/arch/sh/boards/mach-rsk/Kconfig
index 458a11ffd022..0b9b2c4952c1 100644
--- a/arch/sh/boards/mach-rsk/Kconfig
+++ b/arch/sh/boards/mach-rsk/Kconfig
@@ -10,17 +10,17 @@ config SH_RSK7201
 
 config SH_RSK7203
 	bool "RSK7203"
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	depends on CPU_SUBTYPE_SH7203
 
 config SH_RSK7264
 	bool "RSK2+SH7264"
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	depends on CPU_SUBTYPE_SH7264
 
 config SH_RSK7269
 	bool "RSK2+SH7269"
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	depends on CPU_SUBTYPE_SH7269
 
 endchoice