summaryrefslogtreecommitdiffstats
path: root/arch/x86/crypto/aesni-intel_asm.S
diff options
context:
space:
mode:
authorTimothy McCaffrey <timothy.mccaffrey@unisys.com>2015-01-13 13:16:43 -0500
committerHerbert Xu <herbert@gondor.apana.org.au>2015-01-14 21:56:51 +1100
commite31ac32d3bc27c33f002e0c9ffd6ae08b65474e6 (patch)
treee2f11e810e52f8aa8a1b5e813a64ef56f1c1a6a6 /arch/x86/crypto/aesni-intel_asm.S
parentd8219f52a72033f84c15cde73294d46578fb2d68 (diff)
downloadlinux-e31ac32d3bc27c33f002e0c9ffd6ae08b65474e6.tar.gz
linux-e31ac32d3bc27c33f002e0c9ffd6ae08b65474e6.tar.bz2
linux-e31ac32d3bc27c33f002e0c9ffd6ae08b65474e6.zip
crypto: aesni - Add support for 192 & 256 bit keys to AESNI RFC4106
These patches fix the RFC4106 implementation in the aesni-intel module so it supports 192 & 256 bit keys. Since the AVX support that was added to this module also only supports 128 bit keys, and this patch only affects the SSE implementation, changes were also made to use the SSE version if key sizes other than 128 are specified. RFC4106 specifies that 192 & 256 bit keys must be supported (section 8.4). Also, this should fix Strongswan issue 341 where the aesni module needs to be unloaded if 256 bit keys are used: http://wiki.strongswan.org/issues/341 This patch has been tested with Sandy Bridge and Haswell processors. With 128 bit keys and input buffers > 512 bytes a slight performance degradation was noticed (~1%). For input buffers of less than 512 bytes there was no performance impact. Compared to 128 bit keys, 256 bit key size performance is approx. .5 cycles per byte slower on Sandy Bridge, and .37 cycles per byte slower on Haswell (vs. SSE code). This patch has also been tested with StrongSwan IPSec connections where it worked correctly. I created this diff from a git clone of crypto-2.6.git. Any questions, please feel free to contact me. Signed-off-by: Timothy McCaffrey <timothy.mccaffrey@unisys.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Diffstat (limited to 'arch/x86/crypto/aesni-intel_asm.S')
-rw-r--r--arch/x86/crypto/aesni-intel_asm.S343
1 files changed, 177 insertions, 166 deletions
diff --git a/arch/x86/crypto/aesni-intel_asm.S b/arch/x86/crypto/aesni-intel_asm.S
index 477e9d75149b..6bd2c6c95373 100644
--- a/arch/x86/crypto/aesni-intel_asm.S
+++ b/arch/x86/crypto/aesni-intel_asm.S
@@ -32,12 +32,23 @@
#include <linux/linkage.h>
#include <asm/inst.h>
+/*
+ * The following macros are used to move an (un)aligned 16 byte value to/from
+ * an XMM register. This can done for either FP or integer values, for FP use
+ * movaps (move aligned packed single) or integer use movdqa (move double quad
+ * aligned). It doesn't make a performance difference which instruction is used
+ * since Nehalem (original Core i7) was released. However, the movaps is a byte
+ * shorter, so that is the one we'll use for now. (same for unaligned).
+ */
+#define MOVADQ movaps
+#define MOVUDQ movups
+
#ifdef __x86_64__
+
.data
.align 16
.Lgf128mul_x_ble_mask:
.octa 0x00000000000000010000000000000087
-
POLY: .octa 0xC2000000000000000000000000000001
TWOONE: .octa 0x00000001000000000000000000000001
@@ -89,6 +100,7 @@ enc: .octa 0x2
#define arg8 STACK_OFFSET+16(%r14)
#define arg9 STACK_OFFSET+24(%r14)
#define arg10 STACK_OFFSET+32(%r14)
+#define keysize 2*15*16(%arg1)
#endif
@@ -213,10 +225,12 @@ enc: .octa 0x2
.macro INITIAL_BLOCKS_DEC num_initial_blocks TMP1 TMP2 TMP3 TMP4 TMP5 XMM0 XMM1 \
XMM2 XMM3 XMM4 XMMDst TMP6 TMP7 i i_seq operation
+ MOVADQ SHUF_MASK(%rip), %xmm14
mov arg7, %r10 # %r10 = AAD
mov arg8, %r12 # %r12 = aadLen
mov %r12, %r11
pxor %xmm\i, %xmm\i
+
_get_AAD_loop\num_initial_blocks\operation:
movd (%r10), \TMP1
pslldq $12, \TMP1
@@ -225,16 +239,18 @@ _get_AAD_loop\num_initial_blocks\operation:
add $4, %r10
sub $4, %r12
jne _get_AAD_loop\num_initial_blocks\operation
+
cmp $16, %r11
je _get_AAD_loop2_done\num_initial_blocks\operation
+
mov $16, %r12
_get_AAD_loop2\num_initial_blocks\operation:
psrldq $4, %xmm\i
sub $4, %r12
cmp %r11, %r12
jne _get_AAD_loop2\num_initial_blocks\operation
+
_get_AAD_loop2_done\num_initial_blocks\operation:
- movdqa SHUF_MASK(%rip), %xmm14
PSHUFB_XMM %xmm14, %xmm\i # byte-reflect the AAD data
xor %r11, %r11 # initialise the data pointer offset as zero
@@ -243,59 +259,34 @@ _get_AAD_loop2_done\num_initial_blocks\operation:
mov %arg5, %rax # %rax = *Y0
movdqu (%rax), \XMM0 # XMM0 = Y0
- movdqa SHUF_MASK(%rip), %xmm14
PSHUFB_XMM %xmm14, \XMM0
.if (\i == 5) || (\i == 6) || (\i == 7)
+ MOVADQ ONE(%RIP),\TMP1
+ MOVADQ (%arg1),\TMP2
.irpc index, \i_seq
- paddd ONE(%rip), \XMM0 # INCR Y0
+ paddd \TMP1, \XMM0 # INCR Y0
movdqa \XMM0, %xmm\index
- movdqa SHUF_MASK(%rip), %xmm14
PSHUFB_XMM %xmm14, %xmm\index # perform a 16 byte swap
-
-.endr
-.irpc index, \i_seq
- pxor 16*0(%arg1), %xmm\index
-.endr
-.irpc index, \i_seq
- movaps 0x10(%rdi), \TMP1
- AESENC \TMP1, %xmm\index # Round 1
-.endr
-.irpc index, \i_seq
- movaps 0x20(%arg1), \TMP1
- AESENC \TMP1, %xmm\index # Round 2
-.endr
-.irpc index, \i_seq
- movaps 0x30(%arg1), \TMP1
- AESENC \TMP1, %xmm\index # Round 2
-.endr
-.irpc index, \i_seq
- movaps 0x40(%arg1), \TMP1
- AESENC \TMP1, %xmm\index # Round 2
-.endr
-.irpc index, \i_seq
- movaps 0x50(%arg1), \TMP1
- AESENC \TMP1, %xmm\index # Round 2
-.endr
-.irpc index, \i_seq
- movaps 0x60(%arg1), \TMP1
- AESENC \TMP1, %xmm\index # Round 2
+ pxor \TMP2, %xmm\index
.endr
-.irpc index, \i_seq
- movaps 0x70(%arg1), \TMP1
- AESENC \TMP1, %xmm\index # Round 2
-.endr
-.irpc index, \i_seq
- movaps 0x80(%arg1), \TMP1
- AESENC \TMP1, %xmm\index # Round 2
-.endr
-.irpc index, \i_seq
- movaps 0x90(%arg1), \TMP1
- AESENC \TMP1, %xmm\index # Round 2
+ lea 0x10(%arg1),%r10
+ mov keysize,%eax
+ shr $2,%eax # 128->4, 192->6, 256->8
+ add $5,%eax # 128->9, 192->11, 256->13
+
+aes_loop_initial_dec\num_initial_blocks:
+ MOVADQ (%r10),\TMP1
+.irpc index, \i_seq
+ AESENC \TMP1, %xmm\index
.endr
+ add $16,%r10
+ sub $1,%eax
+ jnz aes_loop_initial_dec\num_initial_blocks
+
+ MOVADQ (%r10), \TMP1
.irpc index, \i_seq
- movaps 0xa0(%arg1), \TMP1
- AESENCLAST \TMP1, %xmm\index # Round 10
+ AESENCLAST \TMP1, %xmm\index # Last Round
.endr
.irpc index, \i_seq
movdqu (%arg3 , %r11, 1), \TMP1
@@ -305,10 +296,8 @@ _get_AAD_loop2_done\num_initial_blocks\operation:
add $16, %r11
movdqa \TMP1, %xmm\index
- movdqa SHUF_MASK(%rip), %xmm14
PSHUFB_XMM %xmm14, %xmm\index
-
- # prepare plaintext/ciphertext for GHASH computation
+ # prepare plaintext/ciphertext for GHASH computation
.endr
.endif
GHASH_MUL %xmm\i, \TMP3, \TMP1, \TMP2, \TMP4, \TMP5, \XMM1
@@ -338,30 +327,28 @@ _get_AAD_loop2_done\num_initial_blocks\operation:
* Precomputations for HashKey parallel with encryption of first 4 blocks.
* Haskey_i_k holds XORed values of the low and high parts of the Haskey_i
*/
- paddd ONE(%rip), \XMM0 # INCR Y0
- movdqa \XMM0, \XMM1
- movdqa SHUF_MASK(%rip), %xmm14
+ MOVADQ ONE(%rip), \TMP1
+ paddd \TMP1, \XMM0 # INCR Y0
+ MOVADQ \XMM0, \XMM1
PSHUFB_XMM %xmm14, \XMM1 # perform a 16 byte swap
- paddd ONE(%rip), \XMM0 # INCR Y0
- movdqa \XMM0, \XMM2
- movdqa SHUF_MASK(%rip), %xmm14
+ paddd \TMP1, \XMM0 # INCR Y0
+ MOVADQ \XMM0, \XMM2
PSHUFB_XMM %xmm14, \XMM2 # perform a 16 byte swap
- paddd ONE(%rip), \XMM0 # INCR Y0
- movdqa \XMM0, \XMM3
- movdqa SHUF_MASK(%rip), %xmm14
+ paddd \TMP1, \XMM0 # INCR Y0
+ MOVADQ \XMM0, \XMM3
PSHUFB_XMM %xmm14, \XMM3 # perform a 16 byte swap
- paddd ONE(%rip), \XMM0 # INCR Y0
- movdqa \XMM0, \XMM4
- movdqa SHUF_MASK(%rip), %xmm14
+ paddd \TMP1, \XMM0 # INCR Y0
+ MOVADQ \XMM0, \XMM4
PSHUFB_XMM %xmm14, \XMM4 # perform a 16 byte swap
- pxor 16*0(%arg1), \XMM1
- pxor 16*0(%arg1), \XMM2
- pxor 16*0(%arg1), \XMM3
- pxor 16*0(%arg1), \XMM4
+ MOVADQ 0(%arg1),\TMP1
+ pxor \TMP1, \XMM1
+ pxor \TMP1, \XMM2
+ pxor \TMP1, \XMM3
+ pxor \TMP1, \XMM4
movdqa \TMP3, \TMP5
pshufd $78, \TMP3, \TMP1
pxor \TMP3, \TMP1
@@ -399,7 +386,23 @@ _get_AAD_loop2_done\num_initial_blocks\operation:
pshufd $78, \TMP5, \TMP1
pxor \TMP5, \TMP1
movdqa \TMP1, HashKey_4_k(%rsp)
- movaps 0xa0(%arg1), \TMP2
+ lea 0xa0(%arg1),%r10
+ mov keysize,%eax
+ shr $2,%eax # 128->4, 192->6, 256->8
+ sub $4,%eax # 128->0, 192->2, 256->4
+ jz aes_loop_pre_dec_done\num_initial_blocks
+
+aes_loop_pre_dec\num_initial_blocks:
+ MOVADQ (%r10),\TMP2
+.irpc index, 1234
+ AESENC \TMP2, %xmm\index
+.endr
+ add $16,%r10
+ sub $1,%eax
+ jnz aes_loop_pre_dec\num_initial_blocks
+
+aes_loop_pre_dec_done\num_initial_blocks:
+ MOVADQ (%r10), \TMP2
AESENCLAST \TMP2, \XMM1
AESENCLAST \TMP2, \XMM2
AESENCLAST \TMP2, \XMM3
@@ -421,15 +424,11 @@ _get_AAD_loop2_done\num_initial_blocks\operation:
movdqu \XMM4, 16*3(%arg2 , %r11 , 1)
movdqa \TMP1, \XMM4
add $64, %r11
- movdqa SHUF_MASK(%rip), %xmm14
PSHUFB_XMM %xmm14, \XMM1 # perform a 16 byte swap
pxor \XMMDst, \XMM1
# combine GHASHed value with the corresponding ciphertext
- movdqa SHUF_MASK(%rip), %xmm14
PSHUFB_XMM %xmm14, \XMM2 # perform a 16 byte swap
- movdqa SHUF_MASK(%rip), %xmm14
PSHUFB_XMM %xmm14, \XMM3 # perform a 16 byte swap
- movdqa SHUF_MASK(%rip), %xmm14
PSHUFB_XMM %xmm14, \XMM4 # perform a 16 byte swap
_initial_blocks_done\num_initial_blocks\operation:
@@ -451,6 +450,7 @@ _initial_blocks_done\num_initial_blocks\operation:
.macro INITIAL_BLOCKS_ENC num_initial_blocks TMP1 TMP2 TMP3 TMP4 TMP5 XMM0 XMM1 \
XMM2 XMM3 XMM4 XMMDst TMP6 TMP7 i i_seq operation
+ MOVADQ SHUF_MASK(%rip), %xmm14
mov arg7, %r10 # %r10 = AAD
mov arg8, %r12 # %r12 = aadLen
mov %r12, %r11
@@ -472,7 +472,6 @@ _get_AAD_loop2\num_initial_blocks\operation:
cmp %r11, %r12
jne _get_AAD_loop2\num_initial_blocks\operation
_get_AAD_loop2_done\num_initial_blocks\operation:
- movdqa SHUF_MASK(%rip), %xmm14
PSHUFB_XMM %xmm14, %xmm\i # byte-reflect the AAD data
xor %r11, %r11 # initialise the data pointer offset as zero
@@ -481,59 +480,35 @@ _get_AAD_loop2_done\num_initial_blocks\operation:
mov %arg5, %rax # %rax = *Y0
movdqu (%rax), \XMM0 # XMM0 = Y0
- movdqa SHUF_MASK(%rip), %xmm14
PSHUFB_XMM %xmm14, \XMM0
.if (\i == 5) || (\i == 6) || (\i == 7)
-.irpc index, \i_seq
- paddd ONE(%rip), \XMM0 # INCR Y0
- movdqa \XMM0, %xmm\index
- movdqa SHUF_MASK(%rip), %xmm14
- PSHUFB_XMM %xmm14, %xmm\index # perform a 16 byte swap
-.endr
-.irpc index, \i_seq
- pxor 16*0(%arg1), %xmm\index
-.endr
-.irpc index, \i_seq
- movaps 0x10(%rdi), \TMP1
- AESENC \TMP1, %xmm\index # Round 1
-.endr
-.irpc index, \i_seq
- movaps 0x20(%arg1), \TMP1
- AESENC \TMP1, %xmm\index # Round 2
-.endr
+ MOVADQ ONE(%RIP),\TMP1
+ MOVADQ 0(%arg1),\TMP2
.irpc index, \i_seq
- movaps 0x30(%arg1), \TMP1
- AESENC \TMP1, %xmm\index # Round 2
+ paddd \TMP1, \XMM0 # INCR Y0
+ MOVADQ \XMM0, %xmm\index
+ PSHUFB_XMM %xmm14, %xmm\index # perform a 16 byte swap
+ pxor \TMP2, %xmm\index
.endr
-.irpc index, \i_seq
- movaps 0x40(%arg1), \TMP1
- AESENC \TMP1, %xmm\index # Round 2
-.endr
-.irpc index, \i_seq
- movaps 0x50(%arg1), \TMP1
- AESENC \TMP1, %xmm\index # Round 2
-.endr
-.irpc index, \i_seq
- movaps 0x60(%arg1), \TMP1
- AESENC \TMP1, %xmm\index # Round 2
-.endr
-.irpc index, \i_seq
- movaps 0x70(%arg1), \TMP1
- AESENC \TMP1, %xmm\index # Round 2
-.endr
-.irpc index, \i_seq
- movaps 0x80(%arg1), \TMP1
- AESENC \TMP1, %xmm\index # Round 2
-.endr
-.irpc index, \i_seq
- movaps 0x90(%arg1), \TMP1
- AESENC \TMP1, %xmm\index # Round 2
+ lea 0x10(%arg1),%r10
+ mov keysize,%eax
+ shr $2,%eax # 128->4, 192->6, 256->8
+ add $5,%eax # 128->9, 192->11, 256->13
+
+aes_loop_initial_enc\num_initial_blocks:
+ MOVADQ (%r10),\TMP1
+.irpc index, \i_seq
+ AESENC \TMP1, %xmm\index
.endr
+ add $16,%r10
+ sub $1,%eax
+ jnz aes_loop_initial_enc\num_initial_blocks
+
+ MOVADQ (%r10), \TMP1
.irpc index, \i_seq
- movaps 0xa0(%arg1), \TMP1
- AESENCLAST \TMP1, %xmm\index # Round 10
+ AESENCLAST \TMP1, %xmm\index # Last Round
.endr
.irpc index, \i_seq
movdqu (%arg3 , %r11, 1), \TMP1
@@ -541,8 +516,6 @@ _get_AAD_loop2_done\num_initial_blocks\operation:
movdqu %xmm\index, (%arg2 , %r11, 1)
# write back plaintext/ciphertext for num_initial_blocks
add $16, %r11
-
- movdqa SHUF_MASK(%rip), %xmm14
PSHUFB_XMM %xmm14, %xmm\index
# prepare plaintext/ciphertext for GHASH computation
@@ -575,30 +548,28 @@ _get_AAD_loop2_done\num_initial_blocks\operation:
* Precomputations for HashKey parallel with encryption of first 4 blocks.
* Haskey_i_k holds XORed values of the low and high parts of the Haskey_i
*/
- paddd ONE(%rip), \XMM0 # INCR Y0
- movdqa \XMM0, \XMM1
- movdqa SHUF_MASK(%rip), %xmm14
+ MOVADQ ONE(%RIP),\TMP1
+ paddd \TMP1, \XMM0 # INCR Y0
+ MOVADQ \XMM0, \XMM1
PSHUFB_XMM %xmm14, \XMM1 # perform a 16 byte swap
- paddd ONE(%rip), \XMM0 # INCR Y0
- movdqa \XMM0, \XMM2
- movdqa SHUF_MASK(%rip), %xmm14
+ paddd \TMP1, \XMM0 # INCR Y0
+ MOVADQ \XMM0, \XMM2
PSHUFB_XMM %xmm14, \XMM2 # perform a 16 byte swap
- paddd ONE(%rip), \XMM0 # INCR Y0
- movdqa \XMM0, \XMM3
- movdqa SHUF_MASK(%rip), %xmm14
+ paddd \TMP1, \XMM0 # INCR Y0
+ MOVADQ \XMM0, \XMM3
PSHUFB_XMM %xmm14, \XMM3 # perform a 16 byte swap
- paddd ONE(%rip), \XMM0 # INCR Y0
- movdqa \XMM0, \XMM4
- movdqa SHUF_MASK(%rip), %xmm14
+ paddd \TMP1, \XMM0 # INCR Y0
+ MOVADQ \XMM0, \XMM4
PSHUFB_XMM %xmm14, \XMM4 # perform a 16 byte swap
- pxor 16*0(%arg1), \XMM1
- pxor 16*0(%arg1), \XMM2
- pxor 16*0(%arg1), \XMM3
- pxor 16*0(%arg1), \XMM4
+ MOVADQ 0(%arg1),\TMP1
+ pxor \TMP1, \XMM1
+ pxor \TMP1, \XMM2
+ pxor \TMP1, \XMM3
+ pxor \TMP1, \XMM4
movdqa \TMP3, \TMP5
pshufd $78, \TMP3, \TMP1
pxor \TMP3, \TMP1
@@ -636,7 +607,23 @@ _get_AAD_loop2_done\num_initial_blocks\operation:
pshufd $78, \TMP5, \TMP1
pxor \TMP5, \TMP1
movdqa \TMP1, HashKey_4_k(%rsp)
- movaps 0xa0(%arg1), \TMP2
+ lea 0xa0(%arg1),%r10
+ mov keysize,%eax
+ shr $2,%eax # 128->4, 192->6, 256->8
+ sub $4,%eax # 128->0, 192->2, 256->4
+ jz aes_loop_pre_enc_done\num_initial_blocks
+
+aes_loop_pre_enc\num_initial_blocks:
+ MOVADQ (%r10),\TMP2
+.irpc index, 1234
+ AESENC \TMP2, %xmm\index
+.endr
+ add $16,%r10
+ sub $1,%eax
+ jnz aes_loop_pre_enc\num_initial_blocks
+
+aes_loop_pre_enc_done\num_initial_blocks:
+ MOVADQ (%r10), \TMP2
AESENCLAST \TMP2, \XMM1
AESENCLAST \TMP2, \XMM2
AESENCLAST \TMP2, \XMM3
@@ -655,15 +642,11 @@ _get_AAD_loop2_done\num_initial_blocks\operation:
movdqu \XMM4, 16*3(%arg2 , %r11 , 1)
add $64, %r11
- movdqa SHUF_MASK(%rip), %xmm14
PSHUFB_XMM %xmm14, \XMM1 # perform a 16 byte swap
pxor \XMMDst, \XMM1
# combine GHASHed value with the corresponding ciphertext
- movdqa SHUF_MASK(%rip), %xmm14
PSHUFB_XMM %xmm14, \XMM2 # perform a 16 byte swap
- movdqa SHUF_MASK(%rip), %xmm14
PSHUFB_XMM %xmm14, \XMM3 # perform a 16 byte swap
- movdqa SHUF_MASK(%rip), %xmm14
PSHUFB_XMM %xmm14, \XMM4 # perform a 16 byte swap
_initial_blocks_done\num_initial_blocks\operation:
@@ -794,7 +777,23 @@ TMP6 XMM0 XMM1 XMM2 XMM3 XMM4 XMM5 XMM6 XMM7 XMM8 operation
AESENC \TMP3, \XMM3
AESENC \TMP3, \XMM4
PCLMULQDQ 0x00, \TMP5, \XMM8 # XMM8 = a0*b0
- movaps 0xa0(%arg1), \TMP3
+ lea 0xa0(%arg1),%r10
+ mov keysize,%eax
+ shr $2,%eax # 128->4, 192->6, 256->8
+ sub $4,%eax # 128->0, 192->2, 256->4
+ jz aes_loop_par_enc_done
+
+aes_loop_par_enc:
+ MOVADQ (%r10),\TMP3
+.irpc index, 1234
+ AESENC \TMP3, %xmm\index
+.endr
+ add $16,%r10
+ sub $1,%eax
+ jnz aes_loop_par_enc
+
+aes_loop_par_enc_done:
+ MOVADQ (%r10), \TMP3
AESENCLAST \TMP3, \XMM1 # Round 10
AESENCLAST \TMP3, \XMM2
AESENCLAST \TMP3, \XMM3
@@ -986,8 +985,24 @@ TMP6 XMM0 XMM1 XMM2 XMM3 XMM4 XMM5 XMM6 XMM7 XMM8 operation
AESENC \TMP3, \XMM3
AESENC \TMP3, \XMM4
PCLMULQDQ 0x00, \TMP5, \XMM8 # XMM8 = a0*b0
- movaps 0xa0(%arg1), \TMP3
- AESENCLAST \TMP3, \XMM1 # Round 10
+ lea 0xa0(%arg1),%r10
+ mov keysize,%eax
+ shr $2,%eax # 128->4, 192->6, 256->8
+ sub $4,%eax # 128->0, 192->2, 256->4
+ jz aes_loop_par_dec_done
+
+aes_loop_par_dec:
+ MOVADQ (%r10),\TMP3
+.irpc index, 1234
+ AESENC \TMP3, %xmm\index
+.endr
+ add $16,%r10
+ sub $1,%eax
+ jnz aes_loop_par_dec
+
+aes_loop_par_dec_done:
+ MOVADQ (%r10), \TMP3
+ AESENCLAST \TMP3, \XMM1 # last round
AESENCLAST \TMP3, \XMM2
AESENCLAST \TMP3, \XMM3
AESENCLAST \TMP3, \XMM4
@@ -1155,33 +1170,29 @@ TMP7 XMM1 XMM2 XMM3 XMM4 XMMDst
pxor \TMP6, \XMMDst # reduced result is in XMMDst
.endm
-/* Encryption of a single block done*/
-.macro ENCRYPT_SINGLE_BLOCK XMM0 TMP1
- pxor (%arg1), \XMM0
- movaps 16(%arg1), \TMP1
- AESENC \TMP1, \XMM0
- movaps 32(%arg1), \TMP1
- AESENC \TMP1, \XMM0
- movaps 48(%arg1), \TMP1
- AESENC \TMP1, \XMM0
- movaps 64(%arg1), \TMP1
- AESENC \TMP1, \XMM0
- movaps 80(%arg1), \TMP1
- AESENC \TMP1, \XMM0
- movaps 96(%arg1), \TMP1
- AESENC \TMP1, \XMM0
- movaps 112(%arg1), \TMP1
- AESENC \TMP1, \XMM0
- movaps 128(%arg1), \TMP1
- AESENC \TMP1, \XMM0
- movaps 144(%arg1), \TMP1
- AESENC \TMP1, \XMM0
- movaps 160(%arg1), \TMP1
- AESENCLAST \TMP1, \XMM0
-.endm
+/* Encryption of a single block
+* uses eax & r10
+*/
+.macro ENCRYPT_SINGLE_BLOCK XMM0 TMP1
+ pxor (%arg1), \XMM0
+ mov keysize,%eax
+ shr $2,%eax # 128->4, 192->6, 256->8
+ add $5,%eax # 128->9, 192->11, 256->13
+ lea 16(%arg1), %r10 # get first expanded key address
+
+_esb_loop_\@:
+ MOVADQ (%r10),\TMP1
+ AESENC \TMP1,\XMM0
+ add $16,%r10
+ sub $1,%eax
+ jnz _esb_loop_\@
+
+ MOVADQ (%r10),\TMP1
+ AESENCLAST \TMP1,\XMM0
+.endm
/*****************************************************************************
* void aesni_gcm_dec(void *aes_ctx, // AES Key schedule. Starts on a 16 byte boundary.
* u8 *out, // Plaintext output. Encrypt in-place is allowed.