Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (31 commits)
  ARM: OMAP: Fix export.h or module.h includes
  ARM: OMAP: omap_device: Include linux/export.h
  ARM: OMAP2: Fix H4 matrix keyboard warning
  ARM: OMAP1: Remove unused omap-alsa.h
  ARM: OMAP1: Fix warnings about enabling 32 KiHz timer
  ARM: OMAP2+: timer: Remove omap_device_pm_latency
  ARM: OMAP2+: clock data: Remove redundant timer clkdev
  ARM: OMAP: Devkit8000: Remove double omap_mux_init_gpio
  ARM: OMAP: usb: musb: OMAP: Delete unused function
  MAINTAINERS: Update linux-omap git repository
  ARM: OMAP: change get_context_loss_count ret value to int
  ARM: OMAP4: hsmmc: configure SDMMC1_DR0 properly
  ARM: OMAP4: hsmmc: Fix Pbias configuration on regulator OFF
  ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from common list
  ARM: OMAP: I2C: Fix omap_register_i2c_bus() return value on success
  ARM: OMAP: dmtimer: Include linux/module.h
  ARM: OMAP2+: l3-noc: Include linux/module.h
  ARM: OMAP2+: devices: Fixes for McPDM
  ARM: OMAP: Fix errors and warnings when building for one board
  ARM: OMAP3: PM: restrict erratum i443 handling to OMAP3430 only
  ...

41 files changed, 344 insertions, 401 deletions

diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index c6fe61dfe856..42061573e380 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -42,7 +42,6 @@
 #include <plat/irda.h>
 #include <plat/keypad.h>
 #include <plat/common.h>
-#include <plat/omap-alsa.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 495b3987d461..89ea20ca0ccc 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -116,7 +116,7 @@ void omap1_pm_idle(void)
 		return;
 	}
 
-#ifdef CONFIG_OMAP_MPU_TIMER
+#if defined(CONFIG_OMAP_MPU_TIMER) && !defined(CONFIG_OMAP_DM_TIMER)
 #warning Enable 32kHz OS timer in order to allow sleep states in idle
 	use_idlect1 = use_idlect1 & ~(1 << 9);
 #else
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 42918940c530..90154e411da0 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -226,7 +226,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
 {
 	int ret;
 
-	omap_mux_init_gpio(29, OMAP_PIN_INPUT);
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
 	omap2_hsmmc_init(mmc);
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 0cc9094e5ee0..fb55fa3dad5a 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -28,6 +28,7 @@
  * XXX: Still needed to boot until the i2c & twl driver is adapted to
  * device-tree
  */
+#ifdef CONFIG_ARCH_OMAP4
 static struct twl4030_platform_data sdp4430_twldata = {
 	.irq_base	= TWL6030_IRQ_BASE,
 	.irq_end	= TWL6030_IRQ_END,
@@ -37,7 +38,9 @@ static void __init omap4_i2c_init(void)
 {
 	omap4_pmic_init("twl6030", &sdp4430_twldata);
 }
+#endif
 
+#ifdef CONFIG_ARCH_OMAP3
 static struct twl4030_platform_data beagle_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
@@ -47,6 +50,7 @@ static void __init omap3_i2c_init(void)
 {
 	omap3_pmic_init("twl4030", &beagle_twldata);
 }
+#endif
 
 static struct of_device_id omap_dt_match_table[] __initdata = {
 	{ .compatible = "simple-bus", },
@@ -72,17 +76,21 @@ static void __init omap_generic_init(void)
 	of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
 }
 
+#ifdef CONFIG_ARCH_OMAP4
 static void __init omap4_init(void)
 {
 	omap4_i2c_init();
 	omap_generic_init();
 }
+#endif
 
+#ifdef CONFIG_ARCH_OMAP3
 static void __init omap3_init(void)
 {
 	omap3_i2c_init();
 	omap_generic_init();
 }
+#endif
 
 #if defined(CONFIG_SOC_OMAP2420)
 static const char *omap242x_boards_compat[] __initdata = {
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index c12666ee7017..8b351d92a1cc 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -25,6 +25,7 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/input/matrix_keypad.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -34,7 +35,6 @@
 #include <plat/usb.h>
 #include <plat/board.h>
 #include <plat/common.h>
-#include <plat/keypad.h>
 #include <plat/menelaus.h>
 #include <plat/dma.h>
 #include <plat/gpmc.h>
@@ -50,10 +50,8 @@
 
 #define H4_ETHR_GPIO_IRQ		92
 
-static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 };
-static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 };
-
-static const unsigned int h4_keymap[] = {
+#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
+static const uint32_t board_matrix_keys[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(1, 0, KEY_RIGHT),
 	KEY(2, 0, KEY_A),
@@ -86,6 +84,71 @@ static const unsigned int h4_keymap[] = {
 	KEY(4, 5, KEY_ENTER),
 };
 
+static const struct matrix_keymap_data board_keymap_data = {
+	.keymap			= board_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(board_matrix_keys),
+};
+
+static unsigned int board_keypad_row_gpios[] = {
+	88, 89, 124, 11, 6, 96
+};
+
+static unsigned int board_keypad_col_gpios[] = {
+	90, 91, 100, 36, 12, 97, 98
+};
+
+static struct matrix_keypad_platform_data board_keypad_platform_data = {
+	.keymap_data	= &board_keymap_data,
+	.row_gpios	= board_keypad_row_gpios,
+	.num_row_gpios	= ARRAY_SIZE(board_keypad_row_gpios),
+	.col_gpios	= board_keypad_col_gpios,
+	.num_col_gpios	= ARRAY_SIZE(board_keypad_col_gpios),
+	.active_low	= 1,
+
+	.debounce_ms		= 20,
+	.col_scan_delay_us	= 5,
+};
+
+static struct platform_device board_keyboard = {
+	.name	= "matrix-keypad",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &board_keypad_platform_data,
+	},
+};
+static void __init board_mkp_init(void)
+{
+	omap_mux_init_gpio(88, OMAP_PULL_ENA | OMAP_PULL_UP);
+	omap_mux_init_gpio(89, OMAP_PULL_ENA | OMAP_PULL_UP);
+	omap_mux_init_gpio(124, OMAP_PULL_ENA | OMAP_PULL_UP);
+	omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
+	if (omap_has_menelaus()) {
+		omap_mux_init_signal("sdrc_a14.gpio0",
+			OMAP_PULL_ENA | OMAP_PULL_UP);
+		omap_mux_init_signal("vlynq_rx0.gpio_15", 0);
+		omap_mux_init_signal("gpio_98", 0);
+		board_keypad_row_gpios[5] = 0;
+		board_keypad_col_gpios[2] = 15;
+		board_keypad_col_gpios[6] = 18;
+	} else {
+		omap_mux_init_signal("gpio_96", OMAP_PULL_ENA | OMAP_PULL_UP);
+		omap_mux_init_signal("gpio_100", 0);
+		omap_mux_init_signal("gpio_98", 0);
+	}
+	omap_mux_init_signal("gpio_90", 0);
+	omap_mux_init_signal("gpio_91", 0);
+	omap_mux_init_signal("gpio_36", 0);
+	omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0);
+	omap_mux_init_signal("gpio_97", 0);
+
+	platform_device_register(&board_keyboard);
+}
+#else
+static inline void board_mkp_init(void)
+{
+}
+#endif
+
 static struct mtd_partition h4_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
@@ -137,31 +200,8 @@ static struct platform_device h4_flash_device = {
 	.resource	= &h4_flash_resource,
 };
 
-static const struct matrix_keymap_data h4_keymap_data = {
-	.keymap		= h4_keymap,
-	.keymap_size	= ARRAY_SIZE(h4_keymap),
-};
-
-static struct omap_kp_platform_data h4_kp_data = {
-	.rows		= 6,
-	.cols		= 7,
-	.keymap_data	= &h4_keymap_data,
-	.rep		= true,
-	.row_gpios 	= row_gpios,
-	.col_gpios 	= col_gpios,
-};
-
-static struct platform_device h4_kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &h4_kp_data,
-	},
-};
-
 static struct platform_device *h4_devices[] __initdata = {
 	&h4_flash_device,
-	&h4_kp_device,
 };
 
 static struct panel_generic_dpi_data h4_panel_data = {
@@ -336,31 +376,7 @@ static void __init omap_h4_init(void)
 	 * if not needed.
 	 */
 
-#if defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE)
-	omap_mux_init_gpio(88, OMAP_PULL_ENA | OMAP_PULL_UP);
-	omap_mux_init_gpio(89, OMAP_PULL_ENA | OMAP_PULL_UP);
-	omap_mux_init_gpio(124, OMAP_PULL_ENA | OMAP_PULL_UP);
-	omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
-	if (omap_has_menelaus()) {
-		omap_mux_init_signal("sdrc_a14.gpio0",
-			OMAP_PULL_ENA | OMAP_PULL_UP);
-		omap_mux_init_signal("vlynq_rx0.gpio_15", 0);
-		omap_mux_init_signal("gpio_98", 0);
-		row_gpios[5] = 0;
-		col_gpios[2] = 15;
-		col_gpios[6] = 18;
-	} else {
-		omap_mux_init_signal("gpio_96", OMAP_PULL_ENA | OMAP_PULL_UP);
-		omap_mux_init_signal("gpio_100", 0);
-		omap_mux_init_signal("gpio_98", 0);
-	}
-	omap_mux_init_signal("gpio_90", 0);
-	omap_mux_init_signal("gpio_91", 0);
-	omap_mux_init_signal("gpio_36", 0);
-	omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0);
-	omap_mux_init_signal("gpio_97", 0);
-#endif
-
+	board_mkp_init();
 	i2c_register_board_info(1, h4_i2c_board_info,
 			ARRAY_SIZE(h4_i2c_board_info));
 
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index bcffee001bfa..e069a9be93df 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -46,10 +46,19 @@
 					 (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
 
 /* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
-#define DPLL_FINT_BAND1_MIN		750000
-#define DPLL_FINT_BAND1_MAX		2100000
-#define DPLL_FINT_BAND2_MIN		7500000
-#define DPLL_FINT_BAND2_MAX		21000000
+#define OMAP3430_DPLL_FINT_BAND1_MIN	750000
+#define OMAP3430_DPLL_FINT_BAND1_MAX	2100000
+#define OMAP3430_DPLL_FINT_BAND2_MIN	7500000
+#define OMAP3430_DPLL_FINT_BAND2_MAX	21000000
+
+/*
+ * DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx.
+ * From device data manual section 4.3 "DPLL and DLL Specifications".
+ */
+#define OMAP3PLUS_DPLL_FINT_JTYPE_MIN	500000
+#define OMAP3PLUS_DPLL_FINT_JTYPE_MAX	2500000
+#define OMAP3PLUS_DPLL_FINT_MIN		32000
+#define OMAP3PLUS_DPLL_FINT_MAX		52000000
 
 /* _dpll_test_fint() return codes */
 #define DPLL_FINT_UNDERFLOW		-1
@@ -71,33 +80,43 @@
 static int _dpll_test_fint(struct clk *clk, u8 n)
 {
 	struct dpll_data *dd;
-	long fint;
+	long fint, fint_min, fint_max;
 	int ret = 0;
 
 	dd = clk->dpll_data;
 
 	/* DPLL divider must result in a valid jitter correction val */
 	fint = clk->parent->rate / n;
-	if (fint < DPLL_FINT_BAND1_MIN) {
 
+	if (cpu_is_omap24xx()) {
+		/* Should not be called for OMAP2, so warn if it is called */
+		WARN(1, "No fint limits available for OMAP2!\n");
+		return DPLL_FINT_INVALID;
+	} else if (cpu_is_omap3430()) {
+		fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
+		fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
+	} else if (dd->flags & DPLL_J_TYPE) {
+		fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN;
+		fint_max = OMAP3PLUS_DPLL_FINT_JTYPE_MAX;
+	} else {
+		fint_min = OMAP3PLUS_DPLL_FINT_MIN;
+		fint_max = OMAP3PLUS_DPLL_FINT_MAX;
+	}
+
+	if (fint < fint_min) {
 		pr_debug("rejecting n=%d due to Fint failure, "
 			 "lowering max_divider\n", n);
 		dd->max_divider = n;
 		ret = DPLL_FINT_UNDERFLOW;
-
-	} else if (fint > DPLL_FINT_BAND1_MAX &&
-		   fint < DPLL_FINT_BAND2_MIN) {
-
-		pr_debug("rejecting n=%d due to Fint failure\n", n);
-		ret = DPLL_FINT_INVALID;
-
-	} else if (fint > DPLL_FINT_BAND2_MAX) {
-
+	} else if (fint > fint_max) {
 		pr_debug("rejecting n=%d due to Fint failure, "
 			 "boosting min_divider\n", n);
 		dd->min_divider = n;
 		ret = DPLL_FINT_INVALID;
-
+	} else if (cpu_is_omap3430() && fint > OMAP3430_DPLL_FINT_BAND1_MAX &&
+		   fint < OMAP3430_DPLL_FINT_BAND2_MIN) {
+		pr_debug("rejecting n=%d due to Fint failure\n", n);
+		ret = DPLL_FINT_INVALID;
 	}
 
 	return ret;
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 48ac568881bd..2311bc217226 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -66,6 +66,8 @@ void omap3_noncore_dpll_disable(struct clk *clk);
 int omap4_dpllmx_gatectrl_read(struct clk *clk);
 void omap4_dpllmx_allow_gatectrl(struct clk *clk);
 void omap4_dpllmx_deny_gatectrl(struct clk *clk);
+long omap4_dpll_regm4xen_round_rate(struct clk *clk, unsigned long target_rate);
+unsigned long omap4_dpll_regm4xen_recalc(struct clk *clk);
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
 void omap2_clk_disable_unused(struct clk *clk);
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index 14a6277dd184..61ad3855f10a 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -1898,18 +1898,6 @@ static struct omap_clk omap2420_clks[] = {
 	CLK(NULL,	"pka_ick",	&pka_ick,	CK_242X),
 	CLK(NULL,	"usb_fck",	&usb_fck,	CK_242X),
 	CLK("musb-hdrc",	"fck",	&osc_ck,	CK_242X),
-	CLK("omap_timer.1",	"fck",	&gpt1_fck,	CK_242X),
-	CLK("omap_timer.2",	"fck",	&gpt2_fck,	CK_242X),
-	CLK("omap_timer.3",	"fck",	&gpt3_fck,	CK_242X),
-	CLK("omap_timer.4",	"fck",	&gpt4_fck,	CK_242X),
-	CLK("omap_timer.5",	"fck",	&gpt5_fck,	CK_242X),
-	CLK("omap_timer.6",	"fck",	&gpt6_fck,	CK_242X),
-	CLK("omap_timer.7",	"fck",	&gpt7_fck,	CK_242X),
-	CLK("omap_timer.8",	"fck",	&gpt8_fck,	CK_242X),
-	CLK("omap_timer.9",	"fck",	&gpt9_fck,	CK_242X),
-	CLK("omap_timer.10",	"fck",	&gpt10_fck,	CK_242X),
-	CLK("omap_timer.11",	"fck",	&gpt11_fck,	CK_242X),
-	CLK("omap_timer.12",	"fck",	&gpt12_fck,	CK_242X),
 	CLK("omap_timer.1",	"32k_ck",	&func_32k_ck,	CK_243X),
 	CLK("omap_timer.2",	"32k_ck",	&func_32k_ck,	CK_243X),
 	CLK("omap_timer.3",	"32k_ck",	&func_32k_ck,	CK_243X),
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index ea6717cfa3c8..0cc12879e7b9 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -1998,18 +1998,6 @@ static struct omap_clk omap2430_clks[] = {
 	CLK(NULL,	"mdm_intc_ick",	&mdm_intc_ick,	CK_243X),
 	CLK("omap_hsmmc.0", "mmchsdb_fck",	&mmchsdb1_fck,	CK_243X),
 	CLK("omap_hsmmc.1", "mmchsdb_fck",	&mmchsdb2_fck,	CK_243X),
-	CLK("omap_timer.1",     "fck",  &gpt1_fck,      CK_243X),
-	CLK("omap_timer.2",     "fck",  &gpt2_fck,      CK_243X),
-	CLK("omap_timer.3",     "fck",  &gpt3_fck,      CK_243X),
-	CLK("omap_timer.4",     "fck",  &gpt4_fck,      CK_243X),
-	CLK("omap_timer.5",     "fck",  &gpt5_fck,      CK_243X),
-	CLK("omap_timer.6",     "fck",  &gpt6_fck,      CK_243X),
-	CLK("omap_timer.7",     "fck",  &gpt7_fck,      CK_243X),
-	CLK("omap_timer.8",     "fck",  &gpt8_fck,      CK_243X),
-	CLK("omap_timer.9",     "fck",  &gpt9_fck,      CK_243X),
-	CLK("omap_timer.10",    "fck",  &gpt10_fck,     CK_243X),
-	CLK("omap_timer.11",    "fck",  &gpt11_fck,     CK_243X),
-	CLK("omap_timer.12",    "fck",  &gpt12_fck,     CK_243X),
 	CLK("omap_timer.1",	"32k_ck",  &func_32k_ck,   CK_243X),
 	CLK("omap_timer.2",	"32k_ck",  &func_32k_ck,   CK_243X),
 	CLK("omap_timer.3",	"32k_ck",  &func_32k_ck,   CK_243X),
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 65dd363163bc..5d0064a4fb5a 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3464,18 +3464,6 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK("musb-am35x",	"fck",		&hsotgusb_fck_am35xx,	CK_AM35XX),
 	CLK(NULL,	"hecc_ck",	&hecc_ck,	CK_AM35XX),
 	CLK(NULL,	"uart4_ick",	&uart4_ick_am35xx,	CK_AM35XX),
-	CLK("omap_timer.1",	"fck",	&gpt1_fck,	CK_3XXX),
-	CLK("omap_timer.2",	"fck",	&gpt2_fck,	CK_3XXX),
-	CLK("omap_timer.3",	"fck",	&gpt3_fck,	CK_3XXX),
-	CLK("omap_timer.4",	"fck",	&gpt4_fck,	CK_3XXX),
-	CLK("omap_timer.5",	"fck",	&gpt5_fck,	CK_3XXX),
-	CLK("omap_timer.6",	"fck",	&gpt6_fck,	CK_3XXX),
-	CLK("omap_timer.7",	"fck",	&gpt7_fck,	CK_3XXX),
-	CLK("omap_timer.8",	"fck",	&gpt8_fck,	CK_3XXX),
-	CLK("omap_timer.9",	"fck",	&gpt9_fck,	CK_3XXX),
-	CLK("omap_timer.10",    "fck",  &gpt10_fck,     CK_3XXX),
-	CLK("omap_timer.11",    "fck",  &gpt11_fck,     CK_3XXX),
-	CLK("omap_timer.12",    "fck",  &gpt12_fck,     CK_3XXX),
 	CLK("omap_timer.1",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
 	CLK("omap_timer.2",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
 	CLK("omap_timer.3",	"32k_ck",	&omap_32k_fck,  CK_3XXX),
diff --git a/arch/arm/mach-omap2/clock44xx.h b/arch/arm/mach-omap2/clock44xx.h
index 7ceb870e7ab8..287a46f78d97 100644
--- a/arch/arm/mach-omap2/clock44xx.h
+++ b/arch/arm/mach-omap2/clock44xx.h
@@ -8,6 +8,13 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
 #define __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
 
+/*
+ * OMAP4430_REGM4XEN_MULT: If the CM_CLKMODE_DPLL_ABE.DPLL_REGM4XEN bit is
+ *    set, then the DPLL's lock frequency is multiplied by 4 (OMAP4430 TRM
+ *    vV Section 3.6.3.3.1 "DPLLs Output Clocks Parameters")
+ */
+#define OMAP4430_REGM4XEN_MULT	4
+
 int omap4xxx_clk_init(void);
 
 #endif
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 946bf04a956d..0798a802497a 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -270,8 +270,8 @@ static struct clk dpll_abe_ck = {
 	.dpll_data	= &dpll_abe_dd,
 	.init		= &omap2_init_dpll_parent,
 	.ops		= &clkops_omap3_noncore_dpll_ops,
-	.recalc		= &omap3_dpll_recalc,
-	.round_rate	= &omap2_dpll_round_rate,
+	.recalc		= &omap4_dpll_regm4xen_recalc,
+	.round_rate	= &omap4_dpll_regm4xen_round_rate,
 	.set_rate	= &omap3_noncore_dpll_set_rate,
 };
 
@@ -1195,11 +1195,25 @@ static struct clk l4_wkup_clk_mux_ck = {
 	.recalc		= &omap2_clksel_recalc,
 };
 
+static const struct clksel_rate div2_2to1_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_4430 },
+	{ .div = 2, .val = 0, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel ocp_abe_iclk_div[] = {
+	{ .parent = &aess_fclk, .rates = div2_2to1_rates },
+	{ .parent = NULL },
+};
+
 static struct clk ocp_abe_iclk = {
 	.name		= "ocp_abe_iclk",
 	.parent		= &aess_fclk,
+	.clksel		= ocp_abe_iclk_div,
+	.clksel_reg	= OMAP4430_CM1_ABE_AESS_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_AESS_FCLK_MASK,
 	.ops		= &clkops_null,
-	.recalc		= &followparent_recalc,
+	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk per_abe_24m_fclk = {
@@ -1398,9 +1412,9 @@ static struct clk dss_dss_clk = {
 };
 
 static const struct clksel_rate div3_8to32_rates[] = {
-	{ .div = 8, .val = 0, .flags = RATE_IN_44XX },
-	{ .div = 16, .val = 1, .flags = RATE_IN_44XX },
-	{ .div = 32, .val = 2, .flags = RATE_IN_44XX },
+	{ .div = 8, .val = 0, .flags = RATE_IN_4460 },
+	{ .div = 16, .val = 1, .flags = RATE_IN_4460 },
+	{ .div = 32, .val = 2, .flags = RATE_IN_4460 },
 	{ .div = 0 },
 };
 
@@ -3363,17 +3377,6 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK("usbhs-omap.0",	"usbhost_ick",		&dummy_ck,		CK_443X),
 	CLK("usbhs-omap.0",	"usbtll_fck",		&dummy_ck,	CK_443X),
 	CLK("omap_wdt",	"ick",				&dummy_ck,	CK_443X),
-	CLK("omap_timer.1",	"fck",			&timer1_fck,	CK_443X),
-	CLK("omap_timer.2",	"fck",			&timer2_fck,	CK_443X),
-	CLK("omap_timer.3",	"fck",			&timer3_fck,	CK_443X),
-	CLK("omap_timer.4",	"fck",			&timer4_fck,	CK_443X),
-	CLK("omap_timer.5",	"fck",			&timer5_fck,	CK_443X),
-	CLK("omap_timer.6",	"fck",			&timer6_fck,	CK_443X),
-	CLK("omap_timer.7",	"fck",			&timer7_fck,	CK_443X),
-	CLK("omap_timer.8",	"fck",			&timer8_fck,	CK_443X),
-	CLK("omap_timer.9",	"fck",			&timer9_fck,	CK_443X),
-	CLK("omap_timer.10",	"fck",			&timer10_fck,	CK_443X),
-	CLK("omap_timer.11",	"fck",			&timer11_fck,	CK_443X),
 	CLK("omap_timer.1",	"32k_ck",	&sys_32k_ck,	CK_443X),
 	CLK("omap_timer.2",	"32k_ck",	&sys_32k_ck,	CK_443X),
 	CLK("omap_timer.3",	"32k_ck",	&sys_32k_ck,	CK_443X),
@@ -3403,12 +3406,12 @@ int __init omap4xxx_clk_init(void)
 	struct omap_clk *c;
 	u32 cpu_clkflg;
 
-	if (cpu_is_omap44xx()) {
+	if (cpu_is_omap443x()) {
 		cpu_mask = RATE_IN_4430;
 		cpu_clkflg = CK_443X;
 	} else if (cpu_is_omap446x()) {
-		cpu_mask = RATE_IN_4460;
-		cpu_clkflg = CK_446X;
+		cpu_mask = RATE_IN_4460 | RATE_IN_4430;
+		cpu_clkflg = CK_446X | CK_443X;
 	} else {
 		return 0;
 	}
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 68ec03152d5f..c15cfada5f13 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -318,18 +318,10 @@ static inline void omap_init_audio(void) {}
 #if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \
 		defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE)
 
-static struct omap_device_pm_latency omap_mcpdm_latency[] = {
-	{
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func = omap_device_enable_hwmods,
-		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 static void omap_init_mcpdm(void)
 {
 	struct omap_hwmod *oh;
-	struct omap_device *od;
+	struct platform_device *pdev;
 
 	oh = omap_hwmod_lookup("mcpdm");
 	if (!oh) {
@@ -337,11 +329,8 @@ static void omap_init_mcpdm(void)
 		return;
 	}
 
-	od = omap_device_build("omap-mcpdm", -1, oh, NULL, 0,
-				omap_mcpdm_latency,
-				ARRAY_SIZE(omap_mcpdm_latency), 0);
-	if (IS_ERR(od))
-		printk(KERN_ERR "Could not build omap_device for omap-mcpdm-dai\n");
+	pdev = omap_device_build("omap-mcpdm", -1, oh, NULL, 0, NULL, 0, 0);
+	WARN(IS_ERR(pdev), "Can't build omap_device for omap-mcpdm.\n");
 }
 #else
 static inline void omap_init_mcpdm(void) {}
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index f77022be783d..fc56745676fa 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -390,7 +390,8 @@ int omap3_noncore_dpll_enable(struct clk *clk)
 	 * propagating?
 	 */
 	if (!r)
-		clk->rate = omap2_get_dpll_rate(clk);
+		clk->rate = (clk->recalc) ? clk->recalc(clk) :
+			omap2_get_dpll_rate(clk);
 
 	return r;
 }
@@ -424,6 +425,7 @@ void omap3_noncore_dpll_disable(struct clk *clk)
 int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
 {
 	struct clk *new_parent = NULL;
+	unsigned long hw_rate;
 	u16 freqsel = 0;
 	struct dpll_data *dd;
 	int ret;
@@ -435,7 +437,8 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
 	if (!dd)
 		return -EINVAL;
 
-	if (rate == omap2_get_dpll_rate(clk))
+	hw_rate = (clk->recalc) ? clk->recalc(clk) : omap2_get_dpll_rate(clk);
+	if (rate == hw_rate)
 		return 0;
 
 	/*
@@ -455,7 +458,7 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
 			new_parent = dd->clk_bypass;
 	} else {
 		if (dd->last_rounded_rate != rate)
-			omap2_dpll_round_rate(clk, rate);
+			rate = clk->round_rate(clk, rate);
 
 		if (dd->last_rounded_rate == 0)
 			return -EINVAL;
diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c
index 4e4da6160d05..9c6a296b3dc3 100644
--- a/arch/arm/mach-omap2/dpll44xx.c
+++ b/arch/arm/mach-omap2/dpll44xx.c
@@ -19,6 +19,7 @@
 #include <plat/clock.h>
 
 #include "clock.h"
+#include "clock44xx.h"
 #include "cm-regbits-44xx.h"
 
 /* Supported only on OMAP4 */
@@ -82,3 +83,71 @@ const struct clkops clkops_omap4_dpllmx_ops = {
 	.deny_idle	= omap4_dpllmx_deny_gatectrl,
 };
 
+/**
+ * omap4_dpll_regm4xen_recalc - compute DPLL rate, considering REGM4XEN bit
+ * @clk: struct clk * of the DPLL to compute the rate for
+ *
+ * Compute the output rate for the OMAP4 DPLL represented by @clk.
+ * Takes the REGM4XEN bit into consideration, which is needed for the
+ * OMAP4 ABE DPLL.  Returns the DPLL's output rate (before M-dividers)
+ * upon success, or 0 upon error.
+ */
+unsigned long omap4_dpll_regm4xen_recalc(struct clk *clk)
+{
+	u32 v;
+	unsigned long rate;
+	struct dpll_data *dd;
+
+	if (!clk || !clk->dpll_data)
+		return 0;
+
+	dd = clk->dpll_data;
+
+	rate = omap2_get_dpll_rate(clk);
+
+	/* regm4xen adds a multiplier of 4 to DPLL calculations */
+	v = __raw_readl(dd->control_reg);
+	if (v & OMAP4430_DPLL_REGM4XEN_MASK)
+		rate *= OMAP4430_REGM4XEN_MULT;
+
+	return rate;
+}
+
+/**
+ * omap4_dpll_regm4xen_round_rate - round DPLL rate, considering REGM4XEN bit
+ * @clk: struct clk * of the DPLL to round a rate for
+ * @target_rate: the desired rate of the DPLL
+ *
+ * Compute the rate that would be programmed into the DPLL hardware
+ * for @clk if set_rate() were to be provided with the rate
+ * @target_rate.  Takes the REGM4XEN bit into consideration, which is
+ * needed for the OMAP4 ABE DPLL.  Returns the rounded rate (before
+ * M-dividers) upon success, -EINVAL if @clk is null or not a DPLL, or
+ * ~0 if an error occurred in omap2_dpll_round_rate().
+ */
+long omap4_dpll_regm4xen_round_rate(struct clk *clk, unsigned long target_rate)
+{
+	u32 v;
+	struct dpll_data *dd;
+	long r;
+
+	if (!clk || !clk->dpll_data)
+		return -EINVAL;
+
+	dd = clk->dpll_data;
+
+	/* regm4xen adds a multiplier of 4 to DPLL calculations */
+	v = __raw_readl(dd->control_reg) & OMAP4430_DPLL_REGM4XEN_MASK;
+
+	if (v)
+		target_rate = target_rate / OMAP4430_REGM4XEN_MULT;
+
+	r = omap2_dpll_round_rate(clk, target_rate);
+	if (r == ~0)
+		return r;
+
+	if (v)
+		clk->dpll_data->last_rounded_rate *= OMAP4430_REGM4XEN_MULT;
+
+	return clk->dpll_data->last_rounded_rate;
+}
diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c
index 911cd2e68d46..74f18f2952df 100644
--- a/arch/arm/mach-omap2/dsp.c
+++ b/arch/arm/mach-omap2/dsp.c
@@ -18,6 +18,7 @@
  * of the OMAP PM core code.
  */
 
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include "cm2xxx_3xxx.h"
 #include "prm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 77085847e4e7..f4a1020559a7 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -129,15 +129,11 @@ static void omap4_hsmmc1_before_set_reg(struct device *dev, int slot,
 	 * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
 	 * card with Vcc regulator (from twl4030 or whatever).  OMAP has both
 	 * 1.8V and 3.0V modes, controlled by the PBIAS register.
-	 *
-	 * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
-	 * is most naturally TWL VSIM; those pins also use PBIAS.
-	 *
-	 * FIXME handle VMMC1A as needed ...
 	 */
 	reg = omap4_ctrl_pad_readl(control_pbias_offset);
 	reg &= ~(OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK |
-		OMAP4_MMC1_PWRDNZ_MASK);
+		OMAP4_MMC1_PWRDNZ_MASK |
+		OMAP4_MMC1_PBIASLITE_VMODE_MASK);
 	omap4_ctrl_pad_writel(reg, control_pbias_offset);
 }
 
@@ -172,12 +168,6 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot,
 			reg &= ~(OMAP4_MMC1_PWRDNZ_MASK);
 			omap4_ctrl_pad_writel(reg, control_pbias_offset);
 		}
-	} else {
-		reg = omap4_ctrl_pad_readl(control_pbias_offset);
-		reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK |
-			OMAP4_MMC1_PWRDNZ_MASK |
-			OMAP4_MMC1_PBIASLITE_VMODE_MASK);
-		omap4_ctrl_pad_writel(reg, control_pbias_offset);
 	}
 }
 
@@ -489,7 +479,7 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
 			OMAP4_SDMMC1_PUSTRENGTH_GRP1_MASK);
 		reg &= ~(OMAP4_SDMMC1_PUSTRENGTH_GRP2_MASK |
 			OMAP4_SDMMC1_PUSTRENGTH_GRP3_MASK);
-		reg |= (OMAP4_USBC1_DR0_SPEEDCTRL_MASK|
+		reg |= (OMAP4_SDMMC1_DR0_SPEEDCTRL_MASK |
 			OMAP4_SDMMC1_DR1_SPEEDCTRL_MASK |
 			OMAP4_SDMMC1_DR2_SPEEDCTRL_MASK);
 		omap4_ctrl_pad_writel(reg, control_mmc1);
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index d27daf921c7e..7f47092a193f 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -187,8 +187,11 @@ static void __init omap3_check_features(void)
 	OMAP3_CHECK_FEATURE(status, ISP);
 	if (cpu_is_omap3630())
 		omap_features |= OMAP3_HAS_192MHZ_CLK;
-	if (!cpu_is_omap3505() && !cpu_is_omap3517())
+	if (cpu_is_omap3430() || cpu_is_omap3630())
 		omap_features |= OMAP3_HAS_IO_WAKEUP;
+	if (cpu_is_omap3630() || omap_rev() == OMAP3430_REV_ES3_1 ||
+	    omap_rev() == OMAP3430_REV_ES3_1_2)
+		omap_features |= OMAP3_HAS_IO_CHAIN_CTRL;
 
 	omap_features |= OMAP3_HAS_SDRC;
 
diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h b/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h
index c88420de1151..1e2d3322f33e 100644
--- a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h
+++ b/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h
@@ -941,10 +941,10 @@
 #define OMAP4_DSI2_LANEENABLE_MASK				(0x7 << 29)
 #define OMAP4_DSI1_LANEENABLE_SHIFT				24
 #define OMAP4_DSI1_LANEENABLE_MASK				(0x1f << 24)
-#define OMAP4_DSI1_PIPD_SHIFT					19
-#define OMAP4_DSI1_PIPD_MASK					(0x1f << 19)
-#define OMAP4_DSI2_PIPD_SHIFT					14
-#define OMAP4_DSI2_PIPD_MASK					(0x1f << 14)
+#define OMAP4_DSI2_PIPD_SHIFT					19
+#define OMAP4_DSI2_PIPD_MASK					(0x1f << 19)
+#define OMAP4_DSI1_PIPD_SHIFT					14
+#define OMAP4_DSI1_PIPD_MASK					(0x1f << 14)
 
 /* CONTROL_MCBSPLP */
 #define OMAP4_ALBCTRLRX_FSX_SHIFT				31
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index a5d8dce2a70b..25d20ced03e1 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -359,6 +359,7 @@ static void __init omap_hwmod_init_postsetup(void)
 	omap_pm_if_early_init();
 }
 
+#ifdef CONFIG_ARCH_OMAP2
 void __init omap2420_init_early(void)
 {
 	omap2_set_globals_242x();
@@ -382,11 +383,13 @@ void __init omap2430_init_early(void)
 	omap_hwmod_init_postsetup();
 	omap2430_clk_init();
 }
+#endif
 
 /*
  * Currently only board-omap3beagle.c should call this because of the
  * same machine_id for 34xx and 36xx beagle.. Will get fixed with DT.
  */
+#ifdef CONFIG_ARCH_OMAP3
 void __init omap3_init_early(void)
 {
 	omap2_set_globals_3xxx();
@@ -430,7 +433,9 @@ void __init ti816x_init_early(void)
 	omap_hwmod_init_postsetup();
 	omap3xxx_clk_init();
 }
+#endif
 
+#ifdef CONFIG_ARCH_OMAP4
 void __init omap4430_init_early(void)
 {
 	omap2_set_globals_443x();
@@ -442,6 +447,7 @@ void __init omap4430_init_early(void)
 	omap_hwmod_init_postsetup();
 	omap4xxx_clk_init();
 }
+#endif
 
 void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 				      struct omap_sdrc_params *sdrc_cs1)
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 86d564a640bb..609ea2ded7e3 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -10,6 +10,7 @@
  * for more details.
  */
 
+#include <linux/module.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
index e61feadcda4e..b8822048e409 100644
--- a/arch/arm/mach-omap2/omap-iommu.c
+++ b/arch/arm/mach-omap2/omap-iommu.c
@@ -10,6 +10,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/module.h>
 #include <linux/platform_device.h>
 
 #include <plat/iommu.h>
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index d71380705080..6b3088db83b7 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -2625,7 +2625,7 @@ ohsps_unlock:
  * Returns the context loss count of the powerdomain assocated with @oh
  * upon success, or zero if no powerdomain exists for @oh.
  */
-u32 omap_hwmod_get_context_loss_count(struct omap_hwmod *oh)
+int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh)
 {
 	struct powerdomain *pwrdm;
 	int ret = 0;
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 3008e1672c7a..bc9035ec87fc 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -3159,7 +3159,6 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
 	&omap3xxx_mmc2_hwmod,
 	&omap3xxx_mmc3_hwmod,
 	&omap3xxx_mpu_hwmod,
-	&omap3xxx_iva_hwmod,
 
 	&omap3xxx_timer1_hwmod,
 	&omap3xxx_timer2_hwmod,
@@ -3188,8 +3187,6 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
 	&omap3xxx_i2c1_hwmod,
 	&omap3xxx_i2c2_hwmod,
 	&omap3xxx_i2c3_hwmod,
-	&omap34xx_sr1_hwmod,
-	&omap34xx_sr2_hwmod,
 
 	/* gpio class */
 	&omap3xxx_gpio1_hwmod,
@@ -3211,8 +3208,6 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
 	&omap3xxx_mcbsp2_sidetone_hwmod,
 	&omap3xxx_mcbsp3_sidetone_hwmod,
 
-	/* mailbox class */
-	&omap3xxx_mailbox_hwmod,
 
 	/* mcspi class */
 	&omap34xx_mcspi1,
@@ -3225,31 +3220,39 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
 
 /* 3430ES1-only hwmods */
 static __initdata struct omap_hwmod *omap3430es1_hwmods[] = {
+	&omap3xxx_iva_hwmod,
 	&omap3430es1_dss_core_hwmod,
+	&omap3xxx_mailbox_hwmod,
 	NULL
 };
 
 /* 3430ES2+-only hwmods */
 static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = {
+	&omap3xxx_iva_hwmod,
 	&omap3xxx_dss_core_hwmod,
 	&omap3xxx_usbhsotg_hwmod,
+	&omap3xxx_mailbox_hwmod,
 	NULL
 };
 
 /* 34xx-only hwmods (all ES revisions) */
 static __initdata struct omap_hwmod *omap34xx_hwmods[] = {
+	&omap3xxx_iva_hwmod,
 	&omap34xx_sr1_hwmod,
 	&omap34xx_sr2_hwmod,
+	&omap3xxx_mailbox_hwmod,
 	NULL
 };
 
 /* 36xx-only hwmods (all ES revisions) */
 static __initdata struct omap_hwmod *omap36xx_hwmods[] = {
+	&omap3xxx_iva_hwmod,
 	&omap3xxx_uart4_hwmod,
 	&omap3xxx_dss_core_hwmod,
 	&omap36xx_sr1_hwmod,
 	&omap36xx_sr2_hwmod,
 	&omap3xxx_usbhsotg_hwmod,
+	&omap3xxx_mailbox_hwmod,
 	NULL
 };
 
@@ -3267,7 +3270,7 @@ int __init omap3xxx_hwmod_init(void)
 
 	/* Register hwmods common to all OMAP3 */
 	r = omap_hwmod_register(omap3xxx_hwmods);
-	if (!r)
+	if (r < 0)
 		return r;
 
 	rev = omap_rev();
@@ -3292,7 +3295,7 @@ int __init omap3xxx_hwmod_init(void)
 	};
 
 	r = omap_hwmod_register(h);
-	if (!r)
+	if (r < 0)
 		return r;
 
 	/*
diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/arch/arm/mach-omap2/omap_l3_noc.c
index c8b1bef92e5a..6a66aa5e2a5b 100644
--- a/arch/arm/mach-omap2/omap_l3_noc.c
+++ b/arch/arm/mach-omap2/omap_l3_noc.c
@@ -20,6 +20,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
  * USA
  */
+#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index c8cbd00a41af..efa66494c1e3 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -99,31 +99,27 @@ static void omap3_enable_io_chain(void)
 {
 	int timeout = 0;
 
-	if (omap_rev() >= OMAP3430_REV_ES3_1) {
-		omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
-				     PM_WKEN);
-		/* Do a readback to assure write has been done */
-		omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN);
-
-		while (!(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN) &
-			 OMAP3430_ST_IO_CHAIN_MASK)) {
-			timeout++;
-			if (timeout > 1000) {
-				printk(KERN_ERR "Wake up daisy chain "
-				       "activation failed.\n");
-				return;
-			}
-			omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK,
-					     WKUP_MOD, PM_WKEN);
+	omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+				   PM_WKEN);
+	/* Do a readback to assure write has been done */
+	omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN);
+
+	while (!(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN) &
+		 OMAP3430_ST_IO_CHAIN_MASK)) {
+		timeout++;
+		if (timeout > 1000) {
+			pr_err("Wake up daisy chain activation failed.\n");
+			return;
 		}
+		omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK,
+					   WKUP_MOD, PM_WKEN);
 	}
 }
 
 static void omap3_disable_io_chain(void)
 {
-	if (omap_rev() >= OMAP3430_REV_ES3_1)
-		omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
-				       PM_WKEN);
+	omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+				     PM_WKEN);
 }
 
 static void omap3_core_save_context(void)
@@ -363,7 +359,6 @@ void omap_sram_idle(void)
 		printk(KERN_ERR "Invalid mpu state in sram_idle\n");
 		return;
 	}
-	pwrdm_pre_transition();
 
 	/* NEON control */
 	if (pwrdm_read_pwrst(neon_pwrdm) == PWRDM_POWER_ON)
@@ -376,7 +371,8 @@ void omap_sram_idle(void)
 	    (per_next_state < PWRDM_POWER_ON ||
 	     core_next_state < PWRDM_POWER_ON)) {
 		omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN);
-		omap3_enable_io_chain();
+		if (omap3_has_io_chain_ctrl())
+			omap3_enable_io_chain();
 	}
 
 	/* Block console output in case it is on one of the OMAP UARTs */
@@ -386,6 +382,8 @@ void omap_sram_idle(void)
 			if (!console_trylock())
 				goto console_still_active;
 
+	pwrdm_pre_transition();
+
 	/* PER */
 	if (per_next_state < PWRDM_POWER_ON) {
 		per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
@@ -409,13 +407,14 @@ void omap_sram_idle(void)
 	omap3_intc_prepare_idle();
 
 	/*
-	* On EMU/HS devices ROM code restores a SRDC value
-	* from scratchpad which has automatic self refresh on timeout
-	* of AUTO_CNT = 1 enabled. This takes care of erratum ID i443.
-	* Hence store/restore the SDRC_POWER register here.
-	*/
-	if (omap_rev() >= OMAP3430_REV_ES3_0 &&
-	    omap_type() != OMAP2_DEVICE_TYPE_GP &&
+	 * On EMU/HS devices ROM code restores a SRDC value
+	 * from scratchpad which has automatic self refresh on timeout
+	 * of AUTO_CNT = 1 enabled. This takes care of erratum ID i443.
+	 * Hence store/restore the SDRC_POWER register here.
+	 */
+	if (cpu_is_omap3430() && omap_rev() >= OMAP3430_REV_ES3_0 &&
+	    (omap_type() == OMAP2_DEVICE_TYPE_EMU ||
+	     omap_type() == OMAP2_DEVICE_TYPE_SEC) &&
 	    core_next_state == PWRDM_POWER_OFF)
 		sdrc_pwr = sdrc_read_reg(SDRC_POWER);
 
@@ -432,8 +431,9 @@ void omap_sram_idle(void)
 		omap34xx_do_sram_idle(save_state);
 
 	/* Restore normal SDRC POWER settings */
-	if (omap_rev() >= OMAP3430_REV_ES3_0 &&
-	    omap_type() != OMAP2_DEVICE_TYPE_GP &&
+	if (cpu_is_omap3430() && omap_rev() >= OMAP3430_REV_ES3_0 &&
+	    (omap_type() == OMAP2_DEVICE_TYPE_EMU ||
+	     omap_type() == OMAP2_DEVICE_TYPE_SEC) &&
 	    core_next_state == PWRDM_POWER_OFF)
 		sdrc_write_reg(sdrc_pwr, SDRC_POWER);
 
@@ -455,6 +455,8 @@ void omap_sram_idle(void)
 	}
 	omap3_intc_resume_idle();
 
+	pwrdm_post_transition();
+
 	/* PER */
 	if (per_next_state < PWRDM_POWER_ON) {
 		per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm);
@@ -475,11 +477,10 @@ console_still_active:
 	     core_next_state < PWRDM_POWER_ON)) {
 		omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
 					     PM_WKEN);
-		omap3_disable_io_chain();
+		if (omap3_has_io_chain_ctrl())
+			omap3_disable_io_chain();
 	}
 
-	pwrdm_post_transition();
-
 	clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]);
 }
 
@@ -870,6 +871,9 @@ static int __init omap3_pm_init(void)
 	if (!cpu_is_omap34xx())
 		return -ENODEV;
 
+	if (!omap3_has_io_chain_ctrl())
+		pr_warning("PM: no software I/O chain control; some wakeups may be lost\n");
+
 	pm_errata_configure();
 
 	/* XXX prcm_setup_regs needs to be before enabling hw
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 5164d587ef52..8a18d1bd61c8 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -1002,16 +1002,16 @@ int pwrdm_post_transition(void)
  * @pwrdm: struct powerdomain * to wait for
  *
  * Context loss count is the sum of powerdomain off-mode counter, the
- * logic off counter and the per-bank memory off counter.  Returns 0
+ * logic off counter and the per-bank memory off counter.  Returns negative
  * (and WARNs) upon error, otherwise, returns the context loss count.
  */
-u32 pwrdm_get_context_loss_count(struct powerdomain *pwrdm)
+int pwrdm_get_context_loss_count(struct powerdomain *pwrdm)
 {
 	int i, count;
 
 	if (!pwrdm) {
 		WARN(1, "powerdomain: %s: pwrdm is null\n", __func__);
-		return 0;
+		return -ENODEV;
 	}
 
 	count = pwrdm->state_counter[PWRDM_POWER_OFF];
@@ -1020,7 +1020,13 @@ u32 pwrdm_get_context_loss_count(struct powerdomain *pwrdm)
 	for (i = 0; i < pwrdm->banks; i++)
 		count += pwrdm->ret_mem_off_counter[i];
 
-	pr_debug("powerdomain: %s: context loss count = %u\n",
+	/*
+	 * Context loss count has to be a non-negative value. Clear the sign
+	 * bit to get a value range from 0 to INT_MAX.
+	 */
+	count &= INT_MAX;
+
+	pr_debug("powerdomain: %s: context loss count = %d\n",
 		 pwrdm->name, count);
 
 	return count;
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index 42e6dd8f2a78..0d72a8a8ce4d 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -217,7 +217,7 @@ int pwrdm_clkdm_state_switch(struct clockdomain *clkdm);
 int pwrdm_pre_transition(void);
 int pwrdm_post_transition(void);
 int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm);
-u32 pwrdm_get_context_loss_count(struct powerdomain *pwrdm);
+int pwrdm_get_context_loss_count(struct powerdomain *pwrdm);
 bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm);
 
 extern void omap242x_powerdomains_init(void);
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 0347b93211e6..6a4f6839a7d9 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -17,6 +17,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/clk.h>
 #include <linux/io.h>
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index e49fc7be2229..037b0d7d4e05 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -408,14 +408,6 @@ static int omap2_dm_timer_set_src(struct platform_device *pdev, int source)
 	return ret;
 }
 
-struct omap_device_pm_latency omap2_dmtimer_latency[] = {
-	{
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func   = omap_device_enable_hwmods,
-		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 /**
  * omap_timer_init - build and register timer device with an
  * associated timer hwmod
@@ -477,9 +469,7 @@ static int __init omap_timer_init(struct omap_hwmod *oh, void *unused)
 	pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
 #endif
 	pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata),
-			omap2_dmtimer_latency,
-			ARRAY_SIZE(omap2_dmtimer_latency),
-			0);
+				 NULL, 0, 0);
 
 	if (IS_ERR(pdev)) {
 		pr_err("%s: Can't build omap_device for %s: %s.\n",
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 47fb5d607630..267975086a7b 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -60,44 +60,6 @@ static struct musb_hdrc_platform_data musb_plat = {
 
 static u64 musb_dmamask = DMA_BIT_MASK(32);
 
-static void usb_musb_mux_init(struct omap_musb_board_data *board_data)
-{
-	switch (board_data->interface_type) {
-	case MUSB_INTERFACE_UTMI:
-		omap_mux_init_signal("usba0_otg_dp", OMAP_PIN_INPUT);
-		omap_mux_init_signal("usba0_otg_dm", OMAP_PIN_INPUT);
-		break;
-	case MUSB_INTERFACE_ULPI:
-		omap_mux_init_signal("usba0_ulpiphy_clk",
-						OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usba0_ulpiphy_stp",
-						OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usba0_ulpiphy_dir",
-						OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usba0_ulpiphy_nxt",
-						OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usba0_ulpiphy_dat0",
-						OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usba0_ulpiphy_dat1",
-						OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usba0_ulpiphy_dat2",
-						OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usba0_ulpiphy_dat3",
-						OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usba0_ulpiphy_dat4",
-						OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usba0_ulpiphy_dat5",
-						OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usba0_ulpiphy_dat6",
-						OMAP_PIN_INPUT_PULLDOWN);
-		omap_mux_init_signal("usba0_ulpiphy_dat7",
-						OMAP_PIN_INPUT_PULLDOWN);
-		break;
-	default:
-		break;
-	}
-}
-
 static struct omap_musb_board_data musb_default_board_data = {
 	.interface_type		= MUSB_INTERFACE_ULPI,
 	.mode			= MUSB_OTG,
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 2def4e1990ed..af3b92be8459 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -35,6 +35,7 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/module.h>
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/err.h>
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 679cbd49c019..db071bc71c4d 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -184,7 +184,7 @@ static inline int omap2_i2c_add_bus(int bus_id)
 			NULL, 0, 0);
 	WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name);
 
-	return PTR_ERR(pdev);
+	return PTR_RET(pdev);
 }
 #else
 static inline int omap2_i2c_add_bus(int bus_id)
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 2f9026942229..408a12f79205 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -399,6 +399,13 @@ void omap2_check_revision(void);
 
 /*
  * Runtime detection of OMAP3 features
+ *
+ * OMAP3_HAS_IO_CHAIN_CTRL: Some later members of the OMAP3 chip
+ *    family have OS-level control over the I/O chain clock.  This is
+ *    to avoid a window during which wakeups could potentially be lost
+ *    during powerdomain transitions.  If this bit is set, it
+ *    indicates that the chip does support OS-level control of this
+ *    feature.
  */
 extern u32 omap_features;
 
@@ -410,9 +417,10 @@ extern u32 omap_features;
 #define OMAP3_HAS_192MHZ_CLK		BIT(5)
 #define OMAP3_HAS_IO_WAKEUP		BIT(6)
 #define OMAP3_HAS_SDRC			BIT(7)
-#define OMAP4_HAS_MPU_1GHZ		BIT(8)
-#define OMAP4_HAS_MPU_1_2GHZ		BIT(9)
-#define OMAP4_HAS_MPU_1_5GHZ		BIT(10)
+#define OMAP3_HAS_IO_CHAIN_CTRL		BIT(8)
+#define OMAP4_HAS_MPU_1GHZ		BIT(9)
+#define OMAP4_HAS_MPU_1_2GHZ		BIT(10)
+#define OMAP4_HAS_MPU_1_5GHZ		BIT(11)
 
 
 #define OMAP3_HAS_FEATURE(feat,flag)			\
@@ -429,12 +437,11 @@ OMAP3_HAS_FEATURE(isp, ISP)
 OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK)
 OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP)
 OMAP3_HAS_FEATURE(sdrc, SDRC)
+OMAP3_HAS_FEATURE(io_chain_ctrl, IO_CHAIN_CTRL)
 
 /*
  * Runtime detection of OMAP4 features
  */
-extern u32 omap_features;
-
 #define OMAP4_HAS_FEATURE(feat, flag)			\
 static inline unsigned int omap4_has_ ##feat(void)	\
 {							\
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index d11025e6e7a4..9418f00b6c38 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -104,7 +104,7 @@ struct dmtimer_platform_data {
 
 	bool loses_context;
 
-	u32 (*get_context_loss_count)(struct device *dev);
+	int (*get_context_loss_count)(struct device *dev);
 };
 
 struct omap_dm_timer *omap_dm_timer_request(void);
@@ -279,7 +279,7 @@ struct omap_dm_timer {
 	struct platform_device *pdev;
 	struct list_head node;
 
-	u32 (*get_context_loss_count)(struct device *dev);
+	int (*get_context_loss_count)(struct device *dev);
 };
 
 int omap_dm_timer_prepare(struct omap_dm_timer *timer);
diff --git a/arch/arm/plat-omap/include/plat/omap-alsa.h b/arch/arm/plat-omap/include/plat/omap-alsa.h
deleted file mode 100644
index b53055b390d0..000000000000
--- a/arch/arm/plat-omap/include/plat/omap-alsa.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/omap-alsa.h
- *
- * Alsa Driver for AIC23 and TSC2101 codecs on OMAP platform boards.
- *
- * Copyright (C) 2006 Mika Laitio <lamikr@cc.jyu.fi>
- *
- * Copyright (C) 2005 Instituto Nokia de Tecnologia - INdT - Manaus Brazil
- * Written by Daniel Petrini, David Cohen, Anderson Briglia
- *            {daniel.petrini, david.cohen, anderson.briglia}@indt.org.br
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *  History
- *  -------
- *
- *  2005/07/25 INdT-10LE Kernel Team - 	Alsa driver for omap osk,
- *  					original version based in sa1100 driver
- *  					and omap oss driver.
- */
-
-#ifndef __OMAP_ALSA_H
-#define __OMAP_ALSA_H
-
-#include <plat/dma.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <plat/mcbsp.h>
-#include <linux/platform_device.h>
-
-#define DMA_BUF_SIZE	(1024 * 8)
-
-/*
- * Buffer management for alsa and dma
- */
-struct audio_stream {
-	char *id;		/* identification string */
-	int stream_id;		/* numeric identification */
-	int dma_dev;		/* dma number of that device */
-	int *lch;		/* Chain of channels this stream is linked to */
-	char started;		/* to store if the chain was started or not */
-	int dma_q_head;		/* DMA Channel Q Head */
-	int dma_q_tail;		/* DMA Channel Q Tail */
-	char dma_q_count;	/* DMA Channel Q Count */
-	int active:1;		/* we are using this stream for transfer now */
-	int period;		/* current transfer period */
-	int periods;		/* current count of periods registerd in the DMA engine */
-	spinlock_t dma_lock;	/* for locking in DMA operations */
-	struct snd_pcm_substream *stream;	/* the pcm stream */
-	unsigned linked:1;	/* dma channels linked */
-	int offset;		/* store start position of the last period in the alsa buffer */
-	int (*hw_start)(void);  /* interface to start HW interface, e.g. McBSP */
-	int (*hw_stop)(void);   /* interface to stop HW interface, e.g. McBSP */
-};
-
-/*
- * Alsa card structure for aic23
- */
-struct snd_card_omap_codec {
-	struct snd_card *card;
-	struct snd_pcm *pcm;
-	long samplerate;
-	struct audio_stream s[2];	/* playback & capture */
-};
-
-/* Codec specific information and function pointers.
- * Codec (omap-alsa-aic23.c and omap-alsa-tsc2101.c)
- * are responsible for defining the function pointers.
- */
-struct omap_alsa_codec_config {
-	char 	*name;
-	struct	omap_mcbsp_reg_cfg *mcbsp_regs_alsa;
-	struct	snd_pcm_hw_constraint_list *hw_constraints_rates;
-	struct	snd_pcm_hardware *snd_omap_alsa_playback;
-	struct	snd_pcm_hardware *snd_omap_alsa_capture;
-	void	(*codec_configure_dev)(void);
-	void	(*codec_set_samplerate)(long);
-	void	(*codec_clock_setup)(void);
-	int	(*codec_clock_on)(void);
-	int 	(*codec_clock_off)(void);
-	int	(*get_default_samplerate)(void);
-};
-
-/*********** Mixer function prototypes *************************/
-int snd_omap_mixer(struct snd_card_omap_codec *);
-void snd_omap_init_mixer(void);
-
-#ifdef CONFIG_PM
-void snd_omap_suspend_mixer(void);
-void snd_omap_resume_mixer(void);
-#endif
-
-int snd_omap_alsa_post_probe(struct platform_device *pdev, struct omap_alsa_codec_config *config);
-int snd_omap_alsa_remove(struct platform_device *pdev);
-#ifdef CONFIG_PM
-int snd_omap_alsa_suspend(struct platform_device *pdev, pm_message_t state);
-int snd_omap_alsa_resume(struct platform_device *pdev);
-#else
-#define snd_omap_alsa_suspend	NULL
-#define snd_omap_alsa_resume	NULL
-#endif
-
-void callback_omap_alsa_sound_dma(void *);
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h
index 0840df813f4f..67faa7b8fe92 100644
--- a/arch/arm/plat-omap/include/plat/omap-pm.h
+++ b/arch/arm/plat-omap/include/plat/omap-pm.h
@@ -342,9 +342,9 @@ unsigned long omap_pm_cpu_get_freq(void);
  * driver must restore device context.   If the number of context losses
  * exceeds the maximum positive integer, the function will wrap to 0 and
  * continue counting.  Returns the number of context losses for this device,
- * or zero upon error.
+ * or negative value upon error.
  */
-u32 omap_pm_get_dev_context_loss_count(struct device *dev);
+int omap_pm_get_dev_context_loss_count(struct device *dev);
 
 void omap_pm_enable_off_mode(void);
 void omap_pm_disable_off_mode(void);
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
index 12c5b0c345bf..51423d2727a5 100644
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -107,7 +107,7 @@ struct device *omap_device_get_by_hwmod_name(const char *oh_name);
 int omap_device_align_pm_lat(struct platform_device *pdev,
 			     u32 new_wakeup_lat_limit);
 struct powerdomain *omap_device_get_pwrdm(struct omap_device *od);
-u32 omap_device_get_context_loss_count(struct platform_device *pdev);
+int omap_device_get_context_loss_count(struct platform_device *pdev);
 
 /* Other */
 
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 5419f1a2aaa4..8b372ede17c1 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -600,7 +600,7 @@ int omap_hwmod_for_each_by_class(const char *classname,
 				 void *user);
 
 int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state);
-u32 omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
+int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
 
 int omap_hwmod_no_setup_reset(struct omap_hwmod *oh);
 
diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c
index b0471bb2d47d..3dc3801aace4 100644
--- a/arch/arm/plat-omap/omap-pm-noop.c
+++ b/arch/arm/plat-omap/omap-pm-noop.c
@@ -27,7 +27,7 @@
 #include <plat/omap_device.h>
 
 static bool off_mode_enabled;
-static u32 dummy_context_loss_counter;
+static int dummy_context_loss_counter;
 
 /*
  * Device-driver-originated constraints (via board-*.c files)
@@ -311,22 +311,32 @@ void omap_pm_disable_off_mode(void)
 
 #ifdef CONFIG_ARCH_OMAP2PLUS
 
-u32 omap_pm_get_dev_context_loss_count(struct device *dev)
+int omap_pm_get_dev_context_loss_count(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
-	u32 count;
+	int count;
 
 	if (WARN_ON(!dev))
-		return 0;
+		return -ENODEV;
 
 	if (dev->parent == &omap_device_parent) {
 		count = omap_device_get_context_loss_count(pdev);
 	} else {
 		WARN_ONCE(off_mode_enabled, "omap_pm: using dummy context loss counter; device %s should be converted to omap_device",
 			  dev_name(dev));
-		if (off_mode_enabled)
-			dummy_context_loss_counter++;
+
 		count = dummy_context_loss_counter;
+
+		if (off_mode_enabled) {
+			count++;
+			/*
+			 * Context loss count has to be a non-negative value.
+			 * Clear the sign bit to get a value range from 0 to
+			 * INT_MAX.
+			 */
+			count &= INT_MAX;
+			dummy_context_loss_counter = count;
+		}
 	}
 
 	pr_debug("OMAP PM: context loss count for dev %s = %d\n",
@@ -337,7 +347,7 @@ u32 omap_pm_get_dev_context_loss_count(struct device *dev)
 
 #else
 
-u32 omap_pm_get_dev_context_loss_count(struct device *dev)
+int omap_pm_get_dev_context_loss_count(struct device *dev)
 {
 	return dummy_context_loss_counter;
 }
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index cd90bedd9306..e8d98693d2dd 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -78,6 +78,7 @@
 #undef DEBUG
 
 #include <linux/kernel.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/err.h>
@@ -426,7 +427,7 @@ static int _omap_device_notifier_call(struct notifier_block *nb,
  * return the context loss counter for that hwmod, otherwise return
  * zero.
  */
-u32 omap_device_get_context_loss_count(struct platform_device *pdev)
+int omap_device_get_context_loss_count(struct platform_device *pdev)
 {
 	struct omap_device *od;
 	u32 ret = 0;