diff options
author | Ralf Baechle <ralf@linux-mips.org> | 2006-06-18 16:39:46 +0100 |
---|---|---|
committer | Ralf Baechle <ralf@linux-mips.org> | 2006-06-19 17:39:26 +0100 |
commit | 35189fad3cb5f6e3ab66c8321928a851de0cd2b1 (patch) | |
tree | 70dcd11a08d964da9ee27bc716b2205f250b42dd /arch | |
parent | 355c471f2ff324c21f8a1fb8e2e242a0f2a4aa68 (diff) | |
download | linux-35189fad3cb5f6e3ab66c8321928a851de0cd2b1.tar.gz linux-35189fad3cb5f6e3ab66c8321928a851de0cd2b1.tar.bz2 linux-35189fad3cb5f6e3ab66c8321928a851de0cd2b1.zip |
[MIPS] Support for the RM9000-based Basler eXcite smart camera platform.
Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/mips/Kconfig | 26 | ||||
-rw-r--r-- | arch/mips/Makefile | 7 | ||||
-rw-r--r-- | arch/mips/basler/excite/Makefile | 9 | ||||
-rw-r--r-- | arch/mips/basler/excite/excite_dbg_io.c | 122 | ||||
-rw-r--r-- | arch/mips/basler/excite/excite_device.c | 404 | ||||
-rw-r--r-- | arch/mips/basler/excite/excite_flashtest.c | 294 | ||||
-rw-r--r-- | arch/mips/basler/excite/excite_fpga.h | 80 | ||||
-rw-r--r-- | arch/mips/basler/excite/excite_iodev.c | 183 | ||||
-rw-r--r-- | arch/mips/basler/excite/excite_iodev.h | 10 | ||||
-rw-r--r-- | arch/mips/basler/excite/excite_irq.c | 129 | ||||
-rw-r--r-- | arch/mips/basler/excite/excite_procfs.c | 81 | ||||
-rw-r--r-- | arch/mips/basler/excite/excite_prom.c | 148 | ||||
-rw-r--r-- | arch/mips/basler/excite/excite_setup.c | 307 | ||||
-rw-r--r-- | arch/mips/configs/excite_defconfig | 1211 | ||||
-rw-r--r-- | arch/mips/pci/Makefile | 1 | ||||
-rw-r--r-- | arch/mips/pci/fixup-excite.c | 36 | ||||
-rw-r--r-- | arch/mips/pci/ops-titan.c | 25 | ||||
-rw-r--r-- | arch/mips/pci/pci-excite.c | 149 |
18 files changed, 3215 insertions, 7 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index db3d008732c6..50274fcacde0 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -119,6 +119,32 @@ config MIPS_MIRAGE select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_LITTLE_ENDIAN +config BASLER_EXCITE + bool "Basler eXcite smart camera support" + select DMA_COHERENT + select HW_HAS_PCI + select IRQ_CPU + select IRQ_CPU_RM7K + select IRQ_CPU_RM9K + select SERIAL_RM9000 + select SYS_HAS_CPU_RM9000 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + help + The eXcite is a smart camera platform manufactured by + Basler Vision Technologies AG + +config BASLER_EXCITE_PROTOTYPE + bool "Support for pre-release units" + depends on BASLER_EXCITE + default n + help + Pre-series (prototype) units are different from later ones in + some ways. Select this option if you have one of these. Please + note that a kernel built with this option selected will not be + able to run on normal units. + config MIPS_COBALT bool "Cobalt Server" select DMA_NONCOHERENT diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 207197b91a53..d5930148495a 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -388,6 +388,13 @@ cflags-$(CONFIG_MOMENCO_OCELOT_3) += -Iinclude/asm-mips/mach-ocelot3 load-$(CONFIG_MOMENCO_OCELOT_3) += 0xffffffff80100000 # +# Basler eXcite +# +core-$(CONFIG_BASLER_EXCITE) += arch/mips/basler/excite/ +cflags-$(CONFIG_BASLER_EXCITE) += -Iinclude/asm-mips/mach-excite +load-$(CONFIG_BASLER_EXCITE) += 0x80100000 + +# # Momentum Jaguar ATX # core-$(CONFIG_MOMENCO_JAGUAR_ATX) += arch/mips/momentum/jaguar_atx/ diff --git a/arch/mips/basler/excite/Makefile b/arch/mips/basler/excite/Makefile new file mode 100644 index 000000000000..519142c2e4ef --- /dev/null +++ b/arch/mips/basler/excite/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for Basler eXcite +# + +obj-$(CONFIG_BASLER_EXCITE) += excite_irq.o excite_prom.o excite_setup.o \ + excite_device.o excite_procfs.o + +obj-$(CONFIG_KGDB) += excite_dbg_io.o +obj-m += excite_iodev.o diff --git a/arch/mips/basler/excite/excite_dbg_io.c b/arch/mips/basler/excite/excite_dbg_io.c new file mode 100644 index 000000000000..83f6bddf578b --- /dev/null +++ b/arch/mips/basler/excite/excite_dbg_io.c @@ -0,0 +1,122 @@ +/* + * Copyright (C) 2004 by Basler Vision Technologies AG + * Author: Thomas Koeller <thomas.koeller@baslerweb.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/config.h> +#include <linux/linkage.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <asm/gdb-stub.h> +#include <asm/rm9k-ocd.h> +#include <excite.h> + +#if defined(CONFIG_SERIAL_8250) && CONFIG_SERIAL_8250_NR_UARTS > 1 +#error Debug port used by serial driver +#endif + +#define UART_CLK 25000000 +#define BASE_BAUD (UART_CLK / 16) +#define REGISTER_BASE_0 0x0208UL +#define REGISTER_BASE_1 0x0238UL + +#define REGISTER_BASE_DBG REGISTER_BASE_1 + +#define CPRR 0x0004 +#define UACFG 0x0200 +#define UAINTS 0x0204 +#define UARBR (REGISTER_BASE_DBG + 0x0000) +#define UATHR (REGISTER_BASE_DBG + 0x0004) +#define UADLL (REGISTER_BASE_DBG + 0x0008) +#define UAIER (REGISTER_BASE_DBG + 0x000c) +#define UADLH (REGISTER_BASE_DBG + 0x0010) +#define UAIIR (REGISTER_BASE_DBG + 0x0014) +#define UAFCR (REGISTER_BASE_DBG + 0x0018) +#define UALCR (REGISTER_BASE_DBG + 0x001c) +#define UAMCR (REGISTER_BASE_DBG + 0x0020) +#define UALSR (REGISTER_BASE_DBG + 0x0024) +#define UAMSR (REGISTER_BASE_DBG + 0x0028) +#define UASCR (REGISTER_BASE_DBG + 0x002c) + +#define PARITY_NONE 0 +#define PARITY_ODD 0x08 +#define PARITY_EVEN 0x18 +#define PARITY_MARK 0x28 +#define PARITY_SPACE 0x38 + +#define DATA_5BIT 0x0 +#define DATA_6BIT 0x1 +#define DATA_7BIT 0x2 +#define DATA_8BIT 0x3 + +#define STOP_1BIT 0x0 +#define STOP_2BIT 0x4 + +#define BAUD_DBG 57600 +#define PARITY_DBG PARITY_NONE +#define DATA_DBG DATA_8BIT +#define STOP_DBG STOP_1BIT + +/* Initialize the serial port for KGDB debugging */ +void __init excite_kgdb_init(void) +{ + const u32 divisor = BASE_BAUD / BAUD_DBG; + + /* Take the UART out of reset */ + titan_writel(0x00ff1cff, CPRR); + titan_writel(0x00000000, UACFG); + titan_writel(0x00000002, UACFG); + + titan_writel(0x0, UALCR); + titan_writel(0x0, UAIER); + + /* Disable FIFOs */ + titan_writel(0x00, UAFCR); + + titan_writel(0x80, UALCR); + titan_writel(divisor & 0xff, UADLL); + titan_writel((divisor & 0xff00) >> 8, UADLH); + titan_writel(0x0, UALCR); + + titan_writel(DATA_DBG | PARITY_DBG | STOP_DBG, UALCR); + + /* Enable receiver interrupt */ + titan_readl(UARBR); + titan_writel(0x1, UAIER); +} + +int getDebugChar(void) +{ + while (!(titan_readl(UALSR) & 0x1)); + return titan_readl(UARBR); +} + +int putDebugChar(int data) +{ + while (!(titan_readl(UALSR) & 0x20)); + titan_writel(data, UATHR); + return 1; +} + +/* KGDB interrupt handler */ +asmlinkage void excite_kgdb_inthdl(struct pt_regs *regs) +{ + if (unlikely( + ((titan_readl(UAIIR) & 0x7) == 4) + && ((titan_readl(UARBR) & 0xff) == 0x3))) + set_async_breakpoint(®s->cp0_epc); +} diff --git a/arch/mips/basler/excite/excite_device.c b/arch/mips/basler/excite/excite_device.c new file mode 100644 index 000000000000..34ec76716fa0 --- /dev/null +++ b/arch/mips/basler/excite/excite_device.c @@ -0,0 +1,404 @@ +/* + * Copyright (C) 2004 by Basler Vision Technologies AG + * Author: Thomas Koeller <thomas.koeller@baslerweb.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ioport.h> +#include <linux/err.h> +#include <linux/jiffies.h> +#include <linux/sched.h> +#include <asm/types.h> +#include <asm/rm9k-ocd.h> + +#include <excite.h> +#include <rm9k_eth.h> +#include <rm9k_wdt.h> +#include <rm9k_xicap.h> +#include <excite_nandflash.h> + +#include "excite_iodev.h" + +#define RM9K_GE_UNIT 0 +#define XICAP_UNIT 0 +#define NAND_UNIT 0 + +#define DLL_TIMEOUT 3 /* seconds */ + + +#define RINIT(__start__, __end__, __name__, __parent__) { \ + .name = __name__ "_0", \ + .start = (__start__), \ + .end = (__end__), \ + .flags = 0, \ + .parent = (__parent__) \ +} + +#define RINIT_IRQ(__irq__, __name__) { \ + .name = __name__ "_0", \ + .start = (__irq__), \ + .end = (__irq__), \ + .flags = IORESOURCE_IRQ, \ + .parent = NULL \ +} + + + +enum { + slice_xicap, + slice_eth +}; + + + +static struct resource + excite_ctr_resource = { + .name = "GPI counters", + .start = 0, + .end = 5, + .flags = 0, + .parent = NULL, + .sibling = NULL, + .child = NULL + }, + excite_gpislice_resource = { + .name = "GPI slices", + .start = 0, + .end = 1, + .flags = 0, + .parent = NULL, + .sibling = NULL, + .child = NULL + }, + excite_mdio_channel_resource = { + .name = "MDIO channels", + .start = 0, + .end = 1, + .flags = 0, + .parent = NULL, + .sibling = NULL, + .child = NULL + }, + excite_fifomem_resource = { + .name = "FIFO memory", + .start = 0, + .end = 767, + .flags = 0, + .parent = NULL, + .sibling = NULL, + .child = NULL + }, + excite_scram_resource = { + .name = "Scratch RAM", + .start = EXCITE_PHYS_SCRAM, + .end = EXCITE_PHYS_SCRAM + EXCITE_SIZE_SCRAM - 1, + .flags = IORESOURCE_MEM, + .parent = NULL, + .sibling = NULL, + .child = NULL + }, + excite_fpga_resource = { + .name = "System FPGA", + .start = EXCITE_PHYS_FPGA, + .end = EXCITE_PHYS_FPGA + EXCITE_SIZE_FPGA - 1, + .flags = IORESOURCE_MEM, + .parent = NULL, + .sibling = NULL, + .child = NULL + }, + excite_nand_resource = { + .name = "NAND flash control", + .start = EXCITE_PHYS_NAND, + .end = EXCITE_PHYS_NAND + EXCITE_SIZE_NAND - 1, + .flags = IORESOURCE_MEM, + .parent = NULL, + .sibling = NULL, + .child = NULL + }, + excite_titan_resource = { + .name = "TITAN registers", + .start = EXCITE_PHYS_TITAN, + .end = EXCITE_PHYS_TITAN + EXCITE_SIZE_TITAN - 1, + .flags = IORESOURCE_MEM, + .parent = NULL, + .sibling = NULL, + .child = NULL + }; + + + +static void adjust_resources(struct resource *res, unsigned int n) +{ + struct resource *p; + const unsigned long mask = IORESOURCE_IO | IORESOURCE_MEM + | IORESOURCE_IRQ | IORESOURCE_DMA; + + for (p = res; p < res + n; p++) { + const struct resource * const parent = p->parent; + if (parent) { + p->start += parent->start; + p->end += parent->start; + p->flags = parent->flags & mask; + } + } +} + + + +#if defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE) +static struct resource xicap_rsrc[] = { + RINIT(0x4840, 0x486f, XICAP_RESOURCE_FIFO_RX, &excite_titan_resource), + RINIT(0x4940, 0x494b, XICAP_RESOURCE_FIFO_TX, &excite_titan_resource), + RINIT(0x5040, 0x5127, XICAP_RESOURCE_XDMA, &excite_titan_resource), + RINIT(0x1000, 0x112f, XICAP_RESOURCE_PKTPROC, &excite_titan_resource), + RINIT(0x1100, 0x110f, XICAP_RESOURCE_PKT_STREAM, &excite_fpga_resource), + RINIT(0x0800, 0x0bff, XICAP_RESOURCE_DMADESC, &excite_scram_resource), + RINIT(slice_xicap, slice_xicap, XICAP_RESOURCE_GPI_SLICE, &excite_gpislice_resource), + RINIT(0x0100, 0x02ff, XICAP_RESOURCE_FIFO_BLK, &excite_fifomem_resource), + RINIT_IRQ(TITAN_IRQ, XICAP_RESOURCE_IRQ) +}; + +static struct platform_device xicap_pdev = { + .name = XICAP_NAME, + .id = XICAP_UNIT, + .num_resources = ARRAY_SIZE(xicap_rsrc), + .resource = xicap_rsrc +}; + +/* + * Create a platform device for the GPI port that receives the + * image data from the embedded camera. + */ +static int __init xicap_devinit(void) +{ + unsigned long tend; + u32 reg; + int retval; + + adjust_resources(xicap_rsrc, ARRAY_SIZE(xicap_rsrc)); + + /* Power up the slice and configure it. */ + reg = titan_readl(CPTC1R); + reg &= ~(0x11100 << slice_xicap); + titan_writel(reg, CPTC1R); + + /* Enable slice & DLL. */ + reg= titan_readl(CPRR); + reg &= ~(0x00030003 << (slice_xicap * 2)); + titan_writel(reg, CPRR); + + /* Wait for DLLs to lock */ + tend = jiffies + DLL_TIMEOUT * HZ; + while (time_before(jiffies, tend)) { + if (!(~titan_readl(CPDSR) & (0x1 << (slice_xicap * 4)))) + break; + yield(); + } + + if (~titan_readl(CPDSR) & (0x1 << (slice_xicap * 4))) { + printk(KERN_ERR "%s: DLL not locked after %u seconds\n", + xicap_pdev.name, DLL_TIMEOUT); + retval = -ETIME; + } else { + /* Register platform device */ + retval = platform_device_register(&xicap_pdev); + } + + return retval; +} + +device_initcall(xicap_devinit); +#endif /* defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE) */ + + + +#if defined(CONFIG_WDT_RM9K_GPI) || defined(CONFIG_WDT_RM9K_GPI_MODULE) +static struct resource wdt_rsrc[] = { + RINIT(0, 0, WDT_RESOURCE_COUNTER, &excite_ctr_resource), + RINIT(0x0084, 0x008f, WDT_RESOURCE_REGS, &excite_titan_resource), + RINIT_IRQ(TITAN_IRQ, WDT_RESOURCE_IRQ) +}; + +static struct platform_device wdt_pdev = { + .name = WDT_NAME, + .id = -1, + .num_resources = ARRAY_SIZE(wdt_rsrc), + .resource = wdt_rsrc +}; + +/* + * Create a platform device for the GPI port that receives the + * image data from the embedded camera. + */ +static int __init wdt_devinit(void) +{ + adjust_resources(wdt_rsrc, ARRAY_SIZE(wdt_rsrc)); + return platform_device_register(&wdt_pdev); +} + +device_initcall(wdt_devinit); +#endif /* defined(CONFIG_WDT_RM9K_GPI) || defined(CONFIG_WDT_RM9K_GPI_MODULE) */ + + + +static struct resource excite_nandflash_rsrc[] = { + RINIT(0x2000, 0x201f, EXCITE_NANDFLASH_RESOURCE_REGS, &excite_nand_resource) +}; + +static struct platform_device excite_nandflash_pdev = { + .name = "excite_nand", + .id = NAND_UNIT, + .num_resources = ARRAY_SIZE(excite_nandflash_rsrc), + .resource = excite_nandflash_rsrc +}; + +/* + * Create a platform device for the access to the nand-flash + * port + */ +static int __init excite_nandflash_devinit(void) +{ + adjust_resources(excite_nandflash_rsrc, ARRAY_SIZE(excite_nandflash_rsrc)); + + /* nothing to be done here */ + + /* Register platform device */ + return platform_device_register(&excite_nandflash_pdev); +} + +device_initcall(excite_nandflash_devinit); + + + +static struct resource iodev_rsrc[] = { + RINIT_IRQ(FPGA1_IRQ, IODEV_RESOURCE_IRQ) +}; + +static struct platform_device io_pdev = { + .name = IODEV_NAME, + .id = -1, + .num_resources = ARRAY_SIZE(iodev_rsrc), + .resource = iodev_rsrc +}; + +/* + * Create a platform device for the external I/O ports. + */ +static int __init io_devinit(void) +{ + adjust_resources(iodev_rsrc, ARRAY_SIZE(iodev_rsrc)); + return platform_device_register(&io_pdev); +} + +device_initcall(io_devinit); + + + + +#if defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE) +static struct resource rm9k_ge_rsrc[] = { + RINIT(0x2200, 0x27ff, RM9K_GE_RESOURCE_MAC, &excite_titan_resource), + RINIT(0x1800, 0x1fff, RM9K_GE_RESOURCE_MSTAT, &excite_titan_resource), + RINIT(0x2000, 0x212f, RM9K_GE_RESOURCE_PKTPROC, &excite_titan_resource), + RINIT(0x5140, 0x5227, RM9K_GE_RESOURCE_XDMA, &excite_titan_resource), + RINIT(0x4870, 0x489f, RM9K_GE_RESOURCE_FIFO_RX, &excite_titan_resource), + RINIT(0x494c, 0x4957, RM9K_GE_RESOURCE_FIFO_TX, &excite_titan_resource), + RINIT(0x0000, 0x007f, RM9K_GE_RESOURCE_FIFOMEM_RX, &excite_fifomem_resource), + RINIT(0x0080, 0x00ff, RM9K_GE_RESOURCE_FIFOMEM_TX, &excite_fifomem_resource), + RINIT(0x0180, 0x019f, RM9K_GE_RESOURCE_PHY, &excite_titan_resource), + RINIT(0x0000, 0x03ff, RM9K_GE_RESOURCE_DMADESC_RX, &excite_scram_resource), + RINIT(0x0400, 0x07ff, RM9K_GE_RESOURCE_DMADESC_TX, &excite_scram_resource), + RINIT(slice_eth, slice_eth, RM9K_GE_RESOURCE_GPI_SLICE, &excite_gpislice_resource), + RINIT(0, 0, RM9K_GE_RESOURCE_MDIO_CHANNEL, &excite_mdio_channel_resource), + RINIT_IRQ(TITAN_IRQ, RM9K_GE_RESOURCE_IRQ_MAIN), + RINIT_IRQ(PHY_IRQ, RM9K_GE_RESOURCE_IRQ_PHY) +}; + +static struct platform_device rm9k_ge_pdev = { + .name = RM9K_GE_NAME, + .id = RM9K_GE_UNIT, + .num_resources = ARRAY_SIZE(rm9k_ge_rsrc), + .resource = rm9k_ge_rsrc +}; + + + +/* + * Create a platform device for the Ethernet port. + */ +static int __init rm9k_ge_devinit(void) +{ + u32 reg; + + adjust_resources(rm9k_ge_rsrc, ARRAY_SIZE(rm9k_ge_rsrc)); + + /* Power up the slice and configure it. */ + reg = titan_readl(CPTC1R); + reg &= ~(0x11000 << slice_eth); + reg |= 0x100 << slice_eth; + titan_writel(reg, CPTC1R); + + /* Take the MAC out of reset, reset the DLLs. */ + reg = titan_readl(CPRR); + reg &= ~(0x00030000 << (slice_eth * 2)); + reg |= 0x3 << (slice_eth * 2); + titan_writel(reg, CPRR); + + return platform_device_register(&rm9k_ge_pdev); +} + +device_initcall(rm9k_ge_devinit); +#endif /* defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE) */ + + + +static int __init excite_setup_devs(void) +{ + int res; + u32 reg; + + /* Enable xdma and fifo interrupts */ + reg = titan_readl(0x0050); + titan_writel(reg | 0x18000000, 0x0050); + + res = request_resource(&iomem_resource, &excite_titan_resource); + if (res) + return res; + res = request_resource(&iomem_resource, &excite_scram_resource); + if (res) + return res; + res = request_resource(&iomem_resource, &excite_fpga_resource); + if (res) + return res; + res = request_resource(&iomem_resource, &excite_nand_resource); + if (res) + return res; + excite_fpga_resource.flags = excite_fpga_resource.parent->flags & + ( IORESOURCE_IO | IORESOURCE_MEM + | IORESOURCE_IRQ | IORESOURCE_DMA); + excite_nand_resource.flags = excite_nand_resource.parent->flags & + ( IORESOURCE_IO | IORESOURCE_MEM + | IORESOURCE_IRQ | IORESOURCE_DMA); + + return 0; +} + +arch_initcall(excite_setup_devs); + diff --git a/arch/mips/basler/excite/excite_flashtest.c b/arch/mips/basler/excite/excite_flashtest.c new file mode 100644 index 000000000000..f0024a8e3294 --- /dev/null +++ b/arch/mips/basler/excite/excite_flashtest.c @@ -0,0 +1,294 @@ +/* +* Copyright (C) 2005 by Basler Vision Technologies AG +* Author: Thies Moeller <thies.moeller@baslerweb.com> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/ioport.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/kernel.h> + +#include <excite.h> + +#include <asm/io.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/nand_ecc.h> +#include <linux/mtd/partitions.h> +#include <asm/rm9k-ocd.h> // for ocd_write +#include <linux/workqueue.h> // for queue + +#include "excite_nandflash.h" +#include "nandflash.h" + +#define PFX "excite flashtest: " +typedef void __iomem *io_reg_t; + +#define io_readb(__a__) __raw_readb((__a__)) +#define io_writeb(__v__, __a__) __raw_writeb((__v__), (__a__)) + + + +static inline const struct resource *excite_nandflash_get_resource( + struct platform_device *d, unsigned long flags, const char *basename) +{ + const char fmt[] = "%s_%u"; + char buf[80]; + + if (unlikely(snprintf(buf, sizeof buf, fmt, basename, d->id) >= sizeof buf)) + return NULL; + + return platform_get_resource_byname(d, flags, buf); +} + +static inline io_reg_t +excite_nandflash_map_regs(struct platform_device *d, const char *basename) +{ + void *result = NULL; + const struct resource *const r = + excite_nandflash_get_resource(d, IORESOURCE_MEM, basename); + if (r) + result = ioremap_nocache(r->start, r->end + 1 - r->start); + return result; +} + +/* controller and mtd information */ + +struct excite_nandflash_drvdata { + struct mtd_info board_mtd; + struct nand_chip board_chip; + io_reg_t regs; +}; + + +/* command and control functions */ +static void excite_nandflash_hwcontrol(struct mtd_info *mtd, int cmd) +{ + struct nand_chip *this = mtd->priv; + io_reg_t regs = container_of(mtd,struct excite_nandflash_drvdata,board_mtd)->regs; + + switch (cmd) { + /* Select the command latch */ + case NAND_CTL_SETCLE: this->IO_ADDR_W = regs + EXCITE_NANDFLASH_CMD; + break; + /* Deselect the command latch */ + case NAND_CTL_CLRCLE: this->IO_ADDR_W = regs + EXCITE_NANDFLASH_DATA; + break; + /* Select the address latch */ + case NAND_CTL_SETALE: this->IO_ADDR_W = regs + EXCITE_NANDFLASH_ADDR; + break; + /* Deselect the address latch */ + case NAND_CTL_CLRALE: this->IO_ADDR_W = regs + EXCITE_NANDFLASH_DATA; + break; + /* Select the chip -- not used */ + case NAND_CTL_SETNCE: + break; + /* Deselect the chip -- not used */ + case NAND_CTL_CLRNCE: + break; + } + + this->IO_ADDR_R = this->IO_ADDR_W; +} + +/* excite_nandflash_devready() + * + * returns 0 if the nand is busy, 1 if it is ready + */ +static int excite_nandflash_devready(struct mtd_info *mtd) +{ + struct excite_nandflash_drvdata *drvdata = + container_of(mtd, struct excite_nandflash_drvdata, board_mtd); + + return io_readb(drvdata->regs + EXCITE_NANDFLASH_STATUS); +} + +/* device management functions */ + +/* excite_nandflash_remove + * + * called by device layer to remove the driver + * the binding to the mtd and all allocated + * resources are released + */ +static int excite_nandflash_remove(struct device *dev) +{ + struct excite_nandflash_drvdata *this = dev_get_drvdata(dev); + + pr_info(PFX "remove"); + + dev_set_drvdata(dev, NULL); + + if (this == NULL) { + pr_debug(PFX "call remove without private data!!"); + return 0; + } + + + /* free the common resources */ + if (this->regs != NULL) { + iounmap(this->regs); + this->regs = NULL; + } + + kfree(this); + + return 0; +} + +static int elapsed; + +void my_workqueue_handler(void *arg) +{ + elapsed = 1; +} + +DECLARE_WORK(sigElapsed, my_workqueue_handler, 0); + + +/* excite_nandflash_probe + * + * called by device layer when it finds a device matching + * one our driver can handled. This code checks to see if + * it can allocate all necessary resources then calls the + * nand layer to look for devices +*/ +static int excite_nandflash_probe(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + + struct excite_nandflash_drvdata *drvdata; /* private driver data */ + struct nand_chip *board_chip; /* private flash chip data */ + struct mtd_info *board_mtd; /* mtd info for this board */ + + int err = 0; + int count = 0; + struct timeval tv,endtv; + unsigned int dt; + + pr_info(PFX "probe dev: (%p)\n", dev); + + pr_info(PFX "adjust LB timing\n"); + ocd_writel(0x00000330, LDP2); + + drvdata = kmalloc(sizeof(*drvdata), GFP_KERNEL); + if (unlikely(!drvdata)) { + printk(KERN_ERR PFX "no memory for drvdata\n"); + err = -ENOMEM; + goto mem_error; + } + + /* Initialize structures */ + memset(drvdata, 0, sizeof(*drvdata)); + + /* bind private data into driver */ + dev_set_drvdata(dev, drvdata); + + /* allocate and map the resource */ + drvdata->regs = + excite_nandflash_map_regs(pdev, EXCITE_NANDFLASH_RESOURCE_REGS); + + if (unlikely(!drvdata->regs)) { + printk(KERN_ERR PFX "cannot reserve register region\n"); + err = -ENXIO; + goto io_error; + } + + /* initialise our chip */ + board_chip = &drvdata->board_chip; + + board_chip->IO_ADDR_R = drvdata->regs + EXCITE_NANDFLASH_DATA; + board_chip->IO_ADDR_W = drvdata->regs + EXCITE_NANDFLASH_DATA; + + board_chip->hwcontrol = excite_nandflash_hwcontrol; + board_chip->dev_ready = excite_nandflash_devready; + + board_chip->chip_delay = 25; + #if 0 + /* TODO: speedup the initial scan */ + board_chip->options = NAND_USE_FLASH_BBT; + #endif + board_chip->eccmode = NAND_ECC_SOFT; + + /* link chip to mtd */ + board_mtd = &drvdata->board_mtd; + board_mtd->priv = board_chip; + + + pr_info(PFX "FlashTest\n"); + elapsed = 0; +/* schedule_delayed_work(&sigElapsed, 1*HZ); + while (!elapsed) { + io_readb(drvdata->regs + EXCITE_NANDFLASH_STATUS); + count++; + } + pr_info(PFX "reads in 1 sec --> %d\n",count); +*/ + do_gettimeofday(&tv); + for (count = 0 ; count < 1000000; count ++) { + io_readb(drvdata->regs + EXCITE_NANDFLASH_STATUS); + } + do_gettimeofday(&endtv); + dt = (endtv.tv_sec - tv.tv_sec) * 1000000 + endtv.tv_usec - tv.tv_usec; + pr_info(PFX "%8d us timeval\n",dt); + pr_info(PFX "EndFlashTest\n"); + +/* return with error to unload everything +*/ +io_error: + iounmap(drvdata->regs); + +mem_error: + kfree(drvdata); + + if (err == 0) + err = -EINVAL; + return err; +} + +static struct device_driver excite_nandflash_driver = { + .name = "excite_nand", + .bus = &platform_bus_type, + .probe = excite_nandflash_probe, + .remove = excite_nandflash_remove, +}; + +static int __init excite_nandflash_init(void) +{ + pr_info(PFX "register Driver (Rev: $Revision:$)\n"); + return driver_register(&excite_nandflash_driver); +} + +static void __exit excite_nandflash_exit(void) +{ + driver_unregister(&excite_nandflash_driver); + pr_info(PFX "Driver unregistered"); +} + +module_init(excite_nandflash_init); +module_exit(excite_nandflash_exit); + +MODULE_AUTHOR("Thies Moeller <thies.moeller@baslerweb.com>"); +MODULE_DESCRIPTION("Basler eXcite NAND-Flash driver"); +MODULE_LICENSE("GPL"); diff --git a/arch/mips/basler/excite/excite_fpga.h b/arch/mips/basler/excite/excite_fpga.h new file mode 100644 index 000000000000..38fcda703a0b --- /dev/null +++ b/arch/mips/basler/excite/excite_fpga.h @@ -0,0 +1,80 @@ +#ifndef EXCITE_FPGA_H_INCLUDED +#define EXCITE_FPGA_H_INCLUDED + + +/** + * Adress alignment of the individual FPGA bytes. + * The address arrangement of the individual bytes of the FPGA is two + * byte aligned at the embedded MK2 platform. + */ +#ifdef EXCITE_CCI_FPGA_MK2 +typedef unsigned char excite_cci_fpga_align_t __attribute__ ((aligned(2))); +#else +typedef unsigned char excite_cci_fpga_align_t; +#endif + + +/** + * Size of Dual Ported RAM. + */ +#define EXCITE_DPR_SIZE 263 + + +/** + * Size of Reserved Status Fields in Dual Ported RAM. + */ +#define EXCITE_DPR_STATUS_SIZE 7 + + + +/** + * FPGA. + * Hardware register layout of the FPGA interface. The FPGA must accessed + * byte wise solely. + * @see EXCITE_CCI_DPR_MK2 + */ +typedef struct excite_fpga { + + /** + * Dual Ported RAM. + */ + excite_cci_fpga_align_t dpr[EXCITE_DPR_SIZE]; + + /** + * Status. + */ + excite_cci_fpga_align_t status[EXCITE_DPR_STATUS_SIZE]; + +#ifdef EXCITE_CCI_FPGA_MK2 + /** + * RM9000 Interrupt. + * Write access initiates interrupt at the RM9000 (MIPS) processor of the eXcite. + */ + excite_cci_fpga_align_t rm9k_int; +#else + /** + * MK2 Interrupt. + * Write access initiates interrupt at the ARM processor of the MK2. + */ + excite_cci_fpga_align_t mk2_int; + + excite_cci_fpga_align_t gap[0x1000-0x10f]; + + /** + * IRQ Source/Acknowledge. + */ + excite_cci_fpga_align_t rm9k_irq_src; + + /** + * IRQ Mask. + * Set bits enable the related interrupt. + */ + excite_cci_fpga_align_t rm9k_irq_mask; +#endif + + +} excite_fpga; + + + +#endif /* ndef EXCITE_FPGA_H_INCLUDED */ diff --git a/arch/mips/basler/excite/excite_iodev.c b/arch/mips/basler/excite/excite_iodev.c new file mode 100644 index 000000000000..91121e523043 --- /dev/null +++ b/arch/mips/basler/excite/excite_iodev.c @@ -0,0 +1,183 @@ +/* + * Copyright (C) 2005 by Basler Vision Technologies AG + * Author: Thomas Koeller <thomas.koeller@baslerweb.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/config.h> +#include <linux/compiler.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/wait.h> +#include <linux/poll.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/miscdevice.h> + +#include "excite_iodev.h" + + + +static const struct resource *iodev_get_resource(struct platform_device *, const char *, unsigned int); +static int __init iodev_probe(struct device *); +static int __exit iodev_remove(struct device *); +static int iodev_open(struct inode *, struct file *); +static int iodev_release(struct inode *, struct file *); +static ssize_t iodev_read(struct file *, char __user *, size_t s, loff_t *); +static unsigned int iodev_poll(struct file *, struct poll_table_struct *); +static irqreturn_t iodev_irqhdl(int, void *, struct pt_regs *); + + + +static const char iodev_name[] = "iodev"; +static unsigned int iodev_irq; +static DECLARE_WAIT_QUEUE_HEAD(wq); + + + +static struct file_operations fops = +{ + .owner = THIS_MODULE, + .open = iodev_open, + .release = iodev_release, + .read = iodev_read, + .poll = iodev_poll +}; + +static struct miscdevice miscdev = +{ + .minor = MISC_DYNAMIC_MINOR, + .name = iodev_name, + .fops = &fops +}; + +static struct device_driver iodev_driver = +{ + .name = (char *) iodev_name, + .bus = &platform_bus_type, + .owner = THIS_MODULE, + .probe = iodev_probe, + .remove = __exit_p(iodev_remove) +}; + + + +static const struct resource * +iodev_get_resource(struct platform_device *pdv, const char *name, + unsigned int type) +{ + char buf[80]; + if (snprintf(buf, sizeof buf, "%s_0", name) >= sizeof buf) + return NULL; + return platform_get_resource_byname(pdv, type, buf); +} + + + +/* No hotplugging on the platform bus - use __init */ +static int __init iodev_probe(struct device *dev) +{ + struct platform_device * const pdv = to_platform_device(dev); + const struct resource * const ri = + iodev_get_resource(pdv, IODEV_RESOURCE_IRQ, IORESOURCE_IRQ); + + if (unlikely(!ri)) + return -ENXIO; + + iodev_irq = ri->start; + return misc_register(&miscdev); +} + + + +static int __exit iodev_remove(struct device *dev) +{ + return misc_deregister(&miscdev); +} + + + +static int iodev_open(struct inode *i, struct file *f) +{ + return request_irq(iodev_irq, iodev_irqhdl, SA_INTERRUPT, + iodev_name, &miscdev); +} + + + +static int iodev_release(struct inode *i, struct file *f) +{ + free_irq(iodev_irq, &miscdev); + return 0; +} + + + + +static ssize_t +iodev_read(struct file *f, char __user *d, size_t s, loff_t *o) +{ + ssize_t ret; + DEFINE_WAIT(w); + + prepare_to_wait(&wq, &w, TASK_INTERRUPTIBLE); + if (!signal_pending(current)) + schedule(); + ret = signal_pending(current) ? -ERESTARTSYS : 0; + finish_wait(&wq, &w); + return ret; +} + + +static unsigned int iodev_poll(struct file *f, struct poll_table_struct *p) +{ + poll_wait(f, &wq, p); + return POLLOUT | POLLWRNORM; +} + + + + +static irqreturn_t iodev_irqhdl(int irq, void *ctxt, struct pt_regs *regs) +{ + wake_up(&wq); + return IRQ_HANDLED; +} + + + +static int __init iodev_init_module(void) +{ + return driver_register(&iodev_driver); +} + + + +static void __exit iodev_cleanup_module(void) +{ + driver_unregister(&iodev_driver); +} + +module_init(iodev_init_module); +module_exit(iodev_cleanup_module); + + + +MODULE_AUTHOR("Thomas Koeller <thomas.koeller@baslerweb.com>"); +MODULE_DESCRIPTION("Basler eXcite i/o interrupt handler"); +MODULE_VERSION("0.0"); +MODULE_LICENSE("GPL"); diff --git a/arch/mips/basler/excite/excite_iodev.h b/arch/mips/basler/excite/excite_iodev.h new file mode 100644 index 000000000000..cbfbb5d2ee62 --- /dev/null +++ b/arch/mips/basler/excite/excite_iodev.h @@ -0,0 +1,10 @@ +#ifndef __EXCITE_IODEV_H__ +#define __EXCITE_IODEV_H__ + +/* Device name */ +#define IODEV_NAME "iodev" + +/* Resource names */ +#define IODEV_RESOURCE_IRQ "excite_iodev_irq" + +#endif /* __EXCITE_IODEV_H__ */ diff --git a/arch/mips/basler/excite/excite_irq.c b/arch/mips/basler/excite/excite_irq.c new file mode 100644 index 000000000000..511ad8730f54 --- /dev/null +++ b/arch/mips/basler/excite/excite_irq.c @@ -0,0 +1,129 @@ +/* + * Copyright (C) by Basler Vision Technologies AG + * Author: Thomas Koeller <thomas.koeller@baslereb.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/kernel_stat.h> +#include <linux/module.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/timex.h> +#include <linux/slab.h> +#include <linux/random.h> +#include <asm/bitops.h> +#include <asm/bootinfo.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/irq_cpu.h> +#include <asm/mipsregs.h> +#include <asm/system.h> +#include <asm/rm9k-ocd.h> + +#include <excite.h> + +extern asmlinkage void excite_handle_int(void); + +/* + * Initialize the interrupt handler + */ +void __init arch_init_irq(void) +{ + mips_cpu_irq_init(0); + rm7k_cpu_irq_init(8); + rm9k_cpu_irq_init(12); + +#ifdef CONFIG_KGDB + excite_kgdb_init(); +#endif +} + +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + const u32 + interrupts = read_c0_cause() >> 8, + mask = ((read_c0_status() >> 8) & 0x000000ff) | + (read_c0_intcontrol() & 0x0000ff00), + pending = interrupts & mask; + u32 msgintflags, msgintmask, msgint; + + /* process timer interrupt */ + if (pending & (1 << TIMER_IRQ)) { + do_IRQ(TIMER_IRQ, regs); + return; + } + + /* Process PCI interrupts */ +#if USB_IRQ < 10 + msgintflags = ocd_readl(INTP0Status0 + (USB_MSGINT / 0x20 * 0x10)); + msgintmask = ocd_readl(INTP0Mask0 + (USB_MSGINT / 0x20 * 0x10)); + msgint = msgintflags & msgintmask & (0x1 << (USB_MSGINT % 0x20)); + if ((pending & (1 << USB_IRQ)) && msgint) { +#else + if (pending & (1 << USB_IRQ)) { +#endif + do_IRQ(USB_IRQ, regs); + return; + } + + /* Process TITAN interrupts */ + msgintflags = ocd_readl(INTP0Status0 + (TITAN_MSGINT / 0x20 * 0x10)); + msgintmask = ocd_readl(INTP0Mask0 + (TITAN_MSGINT / 0x20 * 0x10)); + msgint = msgintflags & msgintmask & (0x1 << (TITAN_MSGINT % 0x20)); + if ((pending & (1 << TITAN_IRQ)) && msgint) { + ocd_writel(msgint, INTP0Clear0 + (TITAN_MSGINT / 0x20 * 0x10)); +#if defined(CONFIG_KGDB) + excite_kgdb_inthdl(regs); +#endif + do_IRQ(TITAN_IRQ, regs); + return; + } + + /* Process FPGA line #0 interrupts */ + msgintflags = ocd_readl(INTP0Status0 + (FPGA0_MSGINT / 0x20 * 0x10)); + msgintmask = ocd_readl(INTP0Mask0 + (FPGA0_MSGINT / 0x20 * 0x10)); + msgint = msgintflags & msgintmask & (0x1 << (FPGA0_MSGINT % 0x20)); + if ((pending & (1 << FPGA0_IRQ)) && msgint) { + do_IRQ(FPGA0_IRQ, regs); + return; + } + + /* Process FPGA line #1 interrupts */ + msgintflags = ocd_readl(INTP0Status0 + (FPGA1_MSGINT / 0x20 * 0x10)); + msgintmask = ocd_readl(INTP0Mask0 + (FPGA1_MSGINT / 0x20 * 0x10)); + msgint = msgintflags & msgintmask & (0x1 << (FPGA1_MSGINT % 0x20)); + if ((pending & (1 << FPGA1_IRQ)) && msgint) { + do_IRQ(FPGA1_IRQ, regs); + return; + } + + /* Process PHY interrupts */ + msgintflags = ocd_readl(INTP0Status0 + (PHY_MSGINT / 0x20 * 0x10)); + msgintmask = ocd_readl(INTP0Mask0 + (PHY_MSGINT / 0x20 * 0x10)); + msgint = msgintflags & msgintmask & (0x1 << (PHY_MSGINT % 0x20)); + if ((pending & (1 << PHY_IRQ)) && msgint) { + do_IRQ(PHY_IRQ, regs); + return; + } + + /* Process spurious interrupts */ + spurious_interrupt(regs); +} diff --git a/arch/mips/basler/excite/excite_procfs.c b/arch/mips/basler/excite/excite_procfs.c new file mode 100644 index 000000000000..c62be0341fb8 --- /dev/null +++ b/arch/mips/basler/excite/excite_procfs.c @@ -0,0 +1,81 @@ +/* + * Copyright (C) 2004, 2005 by Basler Vision Technologies AG + * Author: Thomas Koeller <thomas.koeller@baslerweb.com> + * + * Procfs support for Basler eXcite + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/config.h> +#include <linux/proc_fs.h> +#include <linux/stat.h> +#include <asm/page.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/rm9k-ocd.h> + +#include <excite.h> + +static int excite_get_unit_id(char *buf, char **addr, off_t offs, int size) +{ + const int len = snprintf(buf, PAGE_SIZE, "%06x", unit_id); + const int w = len - offs; + *addr = buf + offs; + return w < size ? w : size; +} + +static int +excite_bootrom_read(char *page, char **start, off_t off, int count, + int *eof, void *data) +{ + void __iomem * src; + + if (off >= EXCITE_SIZE_BOOTROM) { + *eof = 1; + return 0; + } + + if ((off + count) > EXCITE_SIZE_BOOTROM) + count = EXCITE_SIZE_BOOTROM - off; + + src = ioremap(EXCITE_PHYS_BOOTROM + off, count); + if (src) { + memcpy_fromio(page, src, count); + iounmap(src); + *start = page; + } else { + count = -ENOMEM; + } + + return count; +} + +void excite_procfs_init(void) +{ + /* Create & populate /proc/excite */ + struct proc_dir_entry * const pdir = proc_mkdir("excite", &proc_root); + if (pdir) { + struct proc_dir_entry * e; + + e = create_proc_info_entry("unit_id", S_IRUGO, pdir, + excite_get_unit_id); + if (e) e->size = 6; + + e = create_proc_read_entry("bootrom", S_IRUGO, pdir, + excite_bootrom_read, NULL); + if (e) e->size = EXCITE_SIZE_BOOTROM; + } +} diff --git a/arch/mips/basler/excite/excite_prom.c b/arch/mips/basler/excite/excite_prom.c new file mode 100644 index 000000000000..84724b270753 --- /dev/null +++ b/arch/mips/basler/excite/excite_prom.c @@ -0,0 +1,148 @@ +/* + * Copyright (C) 2004, 2005 by Thomas Koeller (thomas.koeller@baslerweb.com) + * Based on the PMC-Sierra Yosemite board support by Ralf Baechle and + * Manish Lachwani. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/delay.h> +#include <linux/smp.h> +#include <linux/module.h> +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/processor.h> +#include <asm/reboot.h> +#include <asm/system.h> +#include <asm/bootinfo.h> +#include <asm/string.h> + +#include <excite.h> + +/* This struct is used by Redboot to pass arguments to the kernel */ +typedef struct +{ + char *name; + char *val; +} t_env_var; + +struct parmblock { + t_env_var memsize; + t_env_var modetty0; + t_env_var ethaddr; + t_env_var env_end; + char *argv[2]; + char text[0]; +}; + +static unsigned int prom_argc; +static const char ** prom_argv; +static const t_env_var * prom_env; + +static void prom_halt(void) __attribute__((noreturn)); +static void prom_exit(void) __attribute__((noreturn)); + + + +const char *get_system_type(void) +{ + return "Basler eXcite"; +} + +/* + * Halt the system + */ +static void prom_halt(void) +{ + printk(KERN_NOTICE "\n** System halted.\n"); + while (1) + asm volatile ( + "\t.set\tmips3\n" + "\twait\n" + "\t.set\tmips0\n" + ); +} + +/* + * Reset the CPU and re-enter Redboot + */ +static void prom_exit(void) +{ + unsigned int i; + volatile unsigned char * const flg = + (volatile unsigned char *) (EXCITE_ADDR_FPGA + EXCITE_FPGA_DPR); + + /* Clear the watchdog reset flag, set the reboot flag */ + *flg &= ~0x01; + *flg |= 0x80; + + for (i = 0; i < 10; i++) { + *(volatile unsigned char *) (EXCITE_ADDR_FPGA + EXCITE_FPGA_SYSCTL) = 0x02; + iob(); + mdelay(1000); + } + + printk(KERN_NOTICE "Reset failed\n"); + prom_halt(); +} + +static const char __init *prom_getenv(char *name) +{ + const t_env_var * p; + for (p = prom_env; p->name != NULL; p++) + if(strcmp(name, p->name) == 0) + break; + return p->val; +} + +/* + * Init routine which accepts the variables from Redboot + */ +void __init prom_init(void) +{ + const struct parmblock * const pb = (struct parmblock *) fw_arg2; + + prom_argc = fw_arg0; + prom_argv = (const char **) fw_arg1; + prom_env = &pb->memsize; + + /* Callbacks for halt, restart */ + _machine_restart = (void (*)(char *)) prom_exit; + _machine_halt = prom_halt; + +#ifdef CONFIG_32BIT + /* copy command line */ + strcpy(arcs_cmdline, prom_argv[1]); + memsize = simple_strtol(prom_getenv("memsize"), NULL, 16); + strcpy(modetty, prom_getenv("modetty0")); +#endif /* CONFIG_32BIT */ + +#ifdef CONFIG_64BIT +# error 64 bit support not implemented +#endif /* CONFIG_64BIT */ + + mips_machgroup = MACH_GROUP_TITAN; + mips_machtype = MACH_TITAN_EXCITE; +} + +/* This is called from free_initmem(), so we need to provide it */ +void __init prom_free_prom_memory(void) +{ + /* Nothing to do */ +} diff --git a/arch/mips/basler/excite/excite_setup.c b/arch/mips/basler/excite/excite_setup.c new file mode 100644 index 000000000000..005b025605e6 --- /dev/null +++ b/arch/mips/basler/excite/excite_setup.c @@ -0,0 +1,307 @@ +/* + * Copyright (C) 2004, 2005 by Basler Vision Technologies AG + * Author: Thomas Koeller <thomas.koeller@baslerweb.com> + * Based on the PMC-Sierra Yosemite board support by Ralf Baechle and + * Manish Lachwani. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/tty.h> +#include <linux/serial_core.h> +#include <linux/serial.h> +#include <linux/ioport.h> +#include <linux/spinlock.h> +#include <asm/bootinfo.h> +#include <asm/mipsregs.h> +#include <asm/pgtable-32.h> +#include <asm/io.h> +#include <asm/time.h> +#include <asm/rm9k-ocd.h> + +#include <excite.h> + +#define TITAN_UART_CLK 25000000 + +#if 1 +/* normal serial port assignment */ +#define REGBASE_SER0 0x0208 +#define REGBASE_SER1 0x0238 +#define MASK_SER0 0x1 +#define MASK_SER1 0x2 +#else +/* serial ports swapped */ +#define REGBASE_SER0 0x0238 +#define REGBASE_SER1 0x0208 +#define MASK_SER0 0x2 +#define MASK_SER1 0x1 +#endif + +unsigned long memsize; +char modetty[30]; +unsigned int titan_irq = TITAN_IRQ; +static void __iomem * ctl_regs; +u32 unit_id; + +volatile void __iomem * const ocd_base = (void *) (EXCITE_ADDR_OCD); +volatile void __iomem * const titan_base = (void *) (EXCITE_ADDR_TITAN); + +/* Protect access to shared GPI registers */ +spinlock_t titan_lock = SPIN_LOCK_UNLOCKED; +int titan_irqflags; + + +static void excite_timer_init(void) +{ + const u32 modebit5 = ocd_readl(0x00e4); + unsigned int + mult = ((modebit5 >> 11) & 0x1f) + 2, + div = ((modebit5 >> 16) & 0x1f) + 2; + + if (div == 33) div = 1; + mips_hpt_frequency = EXCITE_CPU_EXT_CLOCK * mult / div / 2; +} + +static void excite_timer_setup(struct irqaction *irq) +{ + /* The eXcite platform uses the alternate timer interrupt */ + set_c0_intcontrol(0x80); + setup_irq(TIMER_IRQ, irq); +} + +static int __init excite_init_console(void) +{ +#if defined(CONFIG_SERIAL_8250) + static __initdata char serr[] = + KERN_ERR "Serial port #%u setup failed\n"; + struct uart_port up; + + /* Take the DUART out of reset */ + titan_writel(0x00ff1cff, CPRR); + +#if defined(CONFIG_KGDB) || (CONFIG_SERIAL_8250_NR_UARTS > 1) + /* Enable both ports */ + titan_writel(MASK_SER0 | MASK_SER1, UACFG); +#else + /* Enable port #0 only */ + titan_writel(MASK_SER0, UACFG); +#endif /* defined(CONFIG_KGDB) */ + + /* + * Set up serial port #0. Do not use autodetection; the result is + * not what we want. + */ + memset(&up, 0, sizeof(up)); + up.membase = (char *) titan_addr(REGBASE_SER0); + up.irq = TITAN_IRQ; + up.uartclk = TITAN_UART_CLK; + up.regshift = 0; + up.iotype = UPIO_MEM32; + up.type = PORT_RM9000; + up.flags = UPF_SHARE_IRQ; + up.line = 0; + if (early_serial_setup(&up)) + printk(serr, up.line); + +#if CONFIG_SERIAL_8250_NR_UARTS > 1 + /* And now for port #1. */ + up.membase = (char *) titan_addr(REGBASE_SER1); + up.line = 1; + if (early_serial_setup(&up)) + printk(serr, up.line); +#endif /* CONFIG_SERIAL_8250_NR_UARTS > 1 */ +#else + /* Leave the DUART in reset */ + titan_writel(0x00ff3cff, CPRR); +#endif /* defined(CONFIG_SERIAL_8250) */ + + return 0; +} + +static int __init excite_platform_init(void) +{ + unsigned int i; + unsigned char buf[3]; + u8 reg; + void __iomem * dpr; + + /* BIU buffer allocations */ + ocd_writel(8, CPURSLMT); /* CPU */ + titan_writel(4, CPGRWL); /* GPI / Ethernet */ + + /* Map control registers located in FPGA */ + ctl_regs = ioremap_nocache(EXCITE_PHYS_FPGA + EXCITE_FPGA_SYSCTL, 16); + if (!ctl_regs) + panic("eXcite: failed to map platform control registers\n"); + memcpy_fromio(buf, ctl_regs + 2, ARRAY_SIZE(buf)); + unit_id = buf[0] | (buf[1] << 8) | (buf[2] << 16); + + /* Clear the reboot flag */ + dpr = ioremap_nocache(EXCITE_PHYS_FPGA + EXCITE_FPGA_DPR, 1); + reg = __raw_readb(dpr); + __raw_writeb(reg & 0x7f, dpr); + iounmap(dpr); + + /* Interrupt controller setup */ + for (i = INTP0Status0; i < INTP0Status0 + 0x80; i += 0x10) { + ocd_writel(0x00000000, i + 0x04); + ocd_writel(0xffffffff, i + 0x0c); + } + ocd_writel(0x2, NMICONFIG); + + ocd_writel(0x1 << (TITAN_MSGINT % 0x20), + INTP0Mask0 + (0x10 * (TITAN_MSGINT / 0x20))); + ocd_writel((0x1 << (FPGA0_MSGINT % 0x20)) + | ocd_readl(INTP0Mask0 + (0x10 * (FPGA0_MSGINT / 0x20))), + INTP0Mask0 + (0x10 * (FPGA0_MSGINT / 0x20))); + ocd_writel((0x1 << (FPGA1_MSGINT % 0x20)) + | ocd_readl(INTP0Mask0 + (0x10 * (FPGA1_MSGINT / 0x20))), + INTP0Mask0 + (0x10 * (FPGA1_MSGINT / 0x20))); + ocd_writel((0x1 << (PHY_MSGINT % 0x20)) + | ocd_readl(INTP0Mask0 + (0x10 * (PHY_MSGINT / 0x20))), + INTP0Mask0 + (0x10 * (PHY_MSGINT / 0x20))); +#if USB_IRQ < 10 + ocd_writel((0x1 << (USB_MSGINT % 0x20)) + | ocd_readl(INTP0Mask0 + (0x10 * (USB_MSGINT / 0x20))), + INTP0Mask0 + (0x10 * (USB_MSGINT / 0x20))); +#endif + /* Enable the packet FIFO, XDMA and XDMA arbiter */ + titan_writel(0x00ff18ff, CPRR); + + /* + * Set up the PADMUX. Power down all ethernet slices, + * they will be powered up and configured at device startup. + */ + titan_writel(0x00878206, CPTC1R); + titan_writel(0x00001100, CPTC0R); /* latch PADMUX, enable WCIMODE */ + + /* Reset and enable the FIFO block */ + titan_writel(0x00000001, SDRXFCIE); + titan_writel(0x00000001, SDTXFCIE); + titan_writel(0x00000100, SDRXFCIE); + titan_writel(0x00000000, SDTXFCIE); + + /* + * Initialize the common interrupt shared by all components of + * the GPI/Ethernet subsystem. + */ + titan_writel((EXCITE_PHYS_OCD >> 12), CPCFG0); + titan_writel(TITAN_MSGINT, CPCFG1); + + /* + * XDMA configuration. + * In order for the XDMA to be sharable among multiple drivers, + * the setup must be done here in the platform. The reason is that + * this setup can only be done while the XDMA is in reset. If this + * were done in a driver, it would interrupt all other drivers + * using the XDMA. + */ + titan_writel(0x80021dff, GXCFG); /* XDMA reset */ + titan_writel(0x00000000, CPXCISRA); + titan_writel(0x00000000, CPXCISRB); /* clear pending interrupts */ +#if defined (CONFIG_HIGHMEM) +# error change for HIGHMEM support! +#else + titan_writel(0x00000000, GXDMADRPFX); /* buffer address prefix */ +#endif + titan_writel(0, GXDMA_DESCADR); + + for (i = 0x5040; i <= 0x5300; i += 0x0040) + titan_writel(0x80080000, i); /* reset channel */ + + titan_writel((0x1 << 29) /* no sparse tx descr. */ + | (0x1 << 28) /* no sparse rx descr. */ + | (0x1 << 23) | (0x1 << 24) /* descriptor coherency */ + | (0x1 << 21) | (0x1 << 22) /* data coherency */ + | (0x1 << 17) + | 0x1dff, + GXCFG); + +#if defined(CONFIG_SMP) +# error No SMP support +#else + /* All interrupts go to core #0 only. */ + titan_writel(0x1f007fff, CPDST0A); + titan_writel(0x00000000, CPDST0B); + titan_writel(0x0000ff3f, CPDST1A); + titan_writel(0x00000000, CPDST1B); + titan_writel(0x00ffffff, CPXDSTA); + titan_writel(0x00000000, CPXDSTB); +#endif + + /* Enable DUART interrupts, disable everything else. */ + titan_writel(0x04000000, CPGIG0ER); + titan_writel(0x000000c0, CPGIG1ER); + + excite_procfs_init(); + return 0; +} + +void __init plat_setup(void) +{ + volatile u32 * const boot_ocd_base = (u32 *) 0xbf7fc000; + + /* Announce RAM to system */ + add_memory_region(0x00000000, memsize, BOOT_MEM_RAM); + + /* Set up timer initialization hooks */ + board_time_init = excite_timer_init; + board_timer_setup = excite_timer_setup; + + /* Set up the peripheral address map */ + *(boot_ocd_base + (LKB9 / sizeof (u32))) = 0; + *(boot_ocd_base + (LKB10 / sizeof (u32))) = 0; + *(boot_ocd_base + (LKB11 / sizeof (u32))) = 0; + *(boot_ocd_base + (LKB12 / sizeof (u32))) = 0; + wmb(); + *(boot_ocd_base + (LKB0 / sizeof (u32))) = EXCITE_PHYS_OCD >> 4; + wmb(); + + ocd_writel((EXCITE_PHYS_TITAN >> 4) | 0x1UL, LKB5); + ocd_writel(((EXCITE_SIZE_TITAN >> 4) & 0x7fffff00) - 0x100, LKM5); + ocd_writel((EXCITE_PHYS_SCRAM >> 4) | 0x1UL, LKB13); + ocd_writel(((EXCITE_SIZE_SCRAM >> 4) & 0xffffff00) - 0x100, LKM13); + + /* Local bus slot #0 */ + ocd_writel(0x00040510, LDP0); + ocd_writel((EXCITE_PHYS_BOOTROM >> 4) | 0x1UL, LKB9); + ocd_writel(((EXCITE_SIZE_BOOTROM >> 4) & 0x03ffff00) - 0x100, LKM9); + + /* Local bus slot #2 */ + ocd_writel(0x00000330, LDP2); + ocd_writel((EXCITE_PHYS_FPGA >> 4) | 0x1, LKB11); + ocd_writel(((EXCITE_SIZE_FPGA >> 4) - 0x100) & 0x03ffff00, LKM11); + + /* Local bus slot #3 */ + ocd_writel(0x00123413, LDP3); + ocd_writel((EXCITE_PHYS_NAND >> 4) | 0x1, LKB12); + ocd_writel(((EXCITE_SIZE_NAND >> 4) - 0x100) & 0x03ffff00, LKM12); +} + + + +console_initcall(excite_init_console); +arch_initcall(excite_platform_init); + +EXPORT_SYMBOL(titan_lock); +EXPORT_SYMBOL(titan_irqflags); +EXPORT_SYMBOL(titan_irq); +EXPORT_SYMBOL(ocd_base); +EXPORT_SYMBOL(titan_base); diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig new file mode 100644 index 000000000000..3240962ef585 --- /dev/null +++ b/arch/mips/configs/excite_defconfig @@ -0,0 +1,1211 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.16-rc4 +# Thu Feb 23 13:15:27 2006 +# +CONFIG_MIPS=y + +# +# Machine selection +# +# CONFIG_MIPS_MTX1 is not set +# CONFIG_MIPS_BOSPORUS is not set +# CONFIG_MIPS_PB1000 is not set +# CONFIG_MIPS_PB1100 is not set +# CONFIG_MIPS_PB1500 is not set +# CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_PB1200 is not set +# CONFIG_MIPS_DB1000 is not set +# CONFIG_MIPS_DB1100 is not set +# CONFIG_MIPS_DB1500 is not set +# CONFIG_MIPS_DB1550 is not set +# CONFIG_MIPS_DB1200 is not set +# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MIPS_EV64120 is not set +# CONFIG_MIPS_EV96100 is not set +# CONFIG_MIPS_IVR is not set +# CONFIG_MIPS_ITE8172 is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_MIPS_ATLAS is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SEAD is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_MOMENCO_JAGUAR_ATX is not set +# CONFIG_MOMENCO_OCELOT is not set +# CONFIG_MOMENCO_OCELOT_3 is not set +# CONFIG_MOMENCO_OCELOT_C is not set +# CONFIG_MOMENCO_OCELOT_G is not set +# CONFIG_MIPS_XXS1500 is not set +# CONFIG_PNX8550_V2PCI is not set +# CONFIG_PNX8550_JBS is not set +CONFIG_BASLER_EXCITE=y +# CONFIG_BASLER_EXCITE_PROTOTYPE is not set +# CONFIG_DDB5074 is not set +# CONFIG_DDB5476 is not set +# CONFIG_DDB5477 is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_QEMU is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_PTSWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SNI_RM200_PCI is not set +# CONFIG_TOSHIBA_JMR3927 is not set +# CONFIG_TOSHIBA_RBTX4927 is not set +# CONFIG_TOSHIBA_RBTX4938 is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_DMA_COHERENT=y +CONFIG_SERIAL_RM9000=y +CONFIG_CPU_BIG_ENDIAN=y +# CONFIG_CPU_LITTLE_ENDIAN is not set +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_IRQ_CPU=y +CONFIG_IRQ_CPU_RM7K=y +CONFIG_IRQ_CPU_RM9K=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 + +# +# CPU selection +# +# CONFIG_CPU_MIPS32_R1 is not set +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +CONFIG_CPU_RM9000=y +# CONFIG_CPU_SB1 is not set +CONFIG_SYS_HAS_CPU_RM9000=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y + +# +# Kernel type +# +CONFIG_32BIT=y +# CONFIG_64BIT is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_CPU_HAS_PREFETCH=y +# CONFIG_MIPS_MT is not set +# CONFIG_64BIT_PHYS_ADDR is not set +# CONFIG_CPU_ADVANCED is not set +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_SMP is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_PREEMPT_BKL=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +# CONFIG_LBD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# +CONFIG_HW_HAS_PCI=y +CONFIG_PCI=y +# CONFIG_PCI_LEGACY_PROC is not set +CONFIG_MMU=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_VERIFY_WRITE=y +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_BASLER_EXCITE=y +# CONFIG_MTD_NAND_BASLER_EXCITE_RDNBY is not set +# CONFIG_MTD_NAND_BASLER_EXCITE_PERF is not set +# CONFIG_MTD_NAND_NANDSIM is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# + +# +# Ethernet (10 or 100Mbit) +# +# CONFIG_NET_ETHERNET is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_TITAN_GE is not set +CONFIG_RM9K_GE=m + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=m +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_WDT_RM9K_GPI=m + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON_OLD is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_SMIVGX is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_FB_DD=y + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=m +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y + +# +# Logo configuration +# +# CONFIG_LOGO is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +CONFIG_USB_ARTTFT=m +# CONFIG_USB_ARTTOUCH is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# EDAC - error detection and reporting (RAS) +# + +# +# eXcite frame capture support +# +CONFIG_EXCITE_FCAP=m +CONFIG_EXCITE_FCAP_GPI=m + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=m +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_CROSSCOMPILE=y +CONFIG_CMDLINE="" + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 56000a069604..465778c5d816 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o # # These are still pretty much in the old state, watch, go blind. # +obj-$(CONFIG_BASLER_EXCITE) = ops-titan.o pci-excite.o fixup-excite.o obj-$(CONFIG_DDB5477) += fixup-ddb5477.o pci-ddb5477.o ops-ddb5477.o obj-$(CONFIG_LASAT) += pci-lasat.o obj-$(CONFIG_MIPS_ATLAS) += fixup-atlas.o diff --git a/arch/mips/pci/fixup-excite.c b/arch/mips/pci/fixup-excite.c new file mode 100644 index 000000000000..1da696d43f00 --- /dev/null +++ b/arch/mips/pci/fixup-excite.c @@ -0,0 +1,36 @@ +/* + * Copyright (C) 2004 by Basler Vision Technologies AG + * Author: Thomas Koeller <thomas.koeller@baslerweb.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <excite.h> + +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + if (pin == 0) + return -1; + + return USB_IRQ; /* USB controller is the only PCI device */ +} + +/* Do platform specific device initialization at pci_enable_device() time */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} diff --git a/arch/mips/pci/ops-titan.c b/arch/mips/pci/ops-titan.c index 233ec6f2054d..ebf8fc40e9b2 100644 --- a/arch/mips/pci/ops-titan.c +++ b/arch/mips/pci/ops-titan.c @@ -26,8 +26,19 @@ #include <linux/pci.h> #include <linux/kernel.h> -#include <asm/titan_dep.h> +#include <asm/pci.h> +#include <asm/io.h> +#include <asm/rm9k-ocd.h> +/* + * PCI specific defines + */ +#define TITAN_PCI_0_CONFIG_ADDRESS 0x780 +#define TITAN_PCI_0_CONFIG_DATA 0x784 + +/* + * Titan PCI Config Read Byte + */ static int titan_read_config(struct pci_bus *bus, unsigned int devfn, int reg, int size, u32 * val) { @@ -43,8 +54,8 @@ static int titan_read_config(struct pci_bus *bus, unsigned int devfn, int reg, /* start the configuration cycle */ - TITAN_WRITE(TITAN_PCI_0_CONFIG_ADDRESS, address); - tmp = TITAN_READ(TITAN_PCI_0_CONFIG_DATA) >> ((reg & 3) << 3); + ocd_writel(address, TITAN_PCI_0_CONFIG_ADDRESS); + tmp = ocd_readl(TITAN_PCI_0_CONFIG_DATA) >> ((reg & 3) << 3); switch (size) { case 1: @@ -71,20 +82,20 @@ static int titan_write_config(struct pci_bus *bus, unsigned int devfn, int reg, (reg & 0xfc) | 0x80000000; /* start the configuration cycle */ - TITAN_WRITE(TITAN_PCI_0_CONFIG_ADDRESS, address); + ocd_writel(address, TITAN_PCI_0_CONFIG_ADDRESS); /* write the data */ switch (size) { case 1: - TITAN_WRITE_8(TITAN_PCI_0_CONFIG_DATA + (~reg & 0x3), val); + ocd_writeb(val, TITAN_PCI_0_CONFIG_DATA + (~reg & 0x3)); break; case 2: - TITAN_WRITE_16(TITAN_PCI_0_CONFIG_DATA + (~reg & 0x2), val); + ocd_writew(val, TITAN_PCI_0_CONFIG_DATA + (~reg & 0x2)); break; case 4: - TITAN_WRITE(TITAN_PCI_0_CONFIG_DATA, val); + ocd_writel(val, TITAN_PCI_0_CONFIG_DATA); break; } diff --git a/arch/mips/pci/pci-excite.c b/arch/mips/pci/pci-excite.c new file mode 100644 index 000000000000..3c86c77cb74f --- /dev/null +++ b/arch/mips/pci/pci-excite.c @@ -0,0 +1,149 @@ +/* + * Copyright (C) 2004 by Basler Vision Technologies AG + * Author: Thomas Koeller <thomas.koeller@baslerweb.com> + * Based on the PMC-Sierra Yosemite board support by Ralf Baechle. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/bitops.h> +#include <asm/rm9k-ocd.h> +#include <excite.h> + + +extern struct pci_ops titan_pci_ops; + + +static struct resource + mem_resource = { + .name = "PCI memory", + .start = EXCITE_PHYS_PCI_MEM, + .end = EXCITE_PHYS_PCI_MEM + EXCITE_SIZE_PCI_MEM - 1, + .flags = IORESOURCE_MEM + }, + io_resource = { + .name = "PCI I/O", + .start = EXCITE_PHYS_PCI_IO, + .end = EXCITE_PHYS_PCI_IO + EXCITE_SIZE_PCI_IO - 1, + .flags = IORESOURCE_IO + }; + + +static struct pci_controller bx_controller = { + .pci_ops = &titan_pci_ops, + .mem_resource = &mem_resource, + .mem_offset = 0x00000000UL, + .io_resource = &io_resource, + .io_offset = 0x00000000UL +}; + + +static char + iopage_failed[] __initdata = "Cannot allocate PCI I/O page", + modebits_no_pci[] __initdata = "PCI is not configured in mode bits"; + +#define RM9000x2_OCD_HTSC 0x0604 +#define RM9000x2_OCD_HTBHL 0x060c +#define RM9000x2_OCD_PCIHRST 0x078c + +#define RM9K_OCD_MODEBIT1 0x00d4 /* (MODEBIT1) Mode Bit 1 */ +#define RM9K_OCD_CPHDCR 0x00f4 /* CPU-PCI/HT Data Control. */ + +#define PCISC_FB2B 0x00000200 +#define PCISC_MWICG 0x00000010 +#define PCISC_EMC 0x00000004 +#define PCISC_ERMA 0x00000002 + + + +static int __init basler_excite_pci_setup(void) +{ + const unsigned int fullbars = memsize / (256 << 20); + unsigned int i; + + /* Check modebits to see if PCI is really enabled. */ + if (!((ocd_readl(RM9K_OCD_MODEBIT1) >> (47-32)) & 0x1)) + panic(modebits_no_pci); + + if (NULL == request_mem_region(EXCITE_PHYS_PCI_IO, EXCITE_SIZE_PCI_IO, + "Memory-mapped PCI I/O page")) + panic(iopage_failed); + + /* Enable PCI 0 as master for config cycles */ + ocd_writel(PCISC_EMC | PCISC_ERMA, RM9000x2_OCD_HTSC); + + + /* Set up latency timer */ + ocd_writel(0x8008, RM9000x2_OCD_HTBHL); + + /* Setup host IO and Memory space */ + ocd_writel((EXCITE_PHYS_PCI_IO >> 4) | 1, LKB7); + ocd_writel(((EXCITE_SIZE_PCI_IO >> 4) & 0x7fffff00) - 0x100, LKM7); + ocd_writel((EXCITE_PHYS_PCI_MEM >> 4) | 1, LKB8); + ocd_writel(((EXCITE_SIZE_PCI_MEM >> 4) & 0x7fffff00) - 0x100, LKM8); + + /* Set up PCI BARs to map all installed memory */ + for (i = 0; i < 6; i++) { + const unsigned int bar = 0x610 + i * 4; + + if (i < fullbars) { + ocd_writel(0x10000000 * i, bar); + ocd_writel(0x01000000 * i, bar + 0x140); + ocd_writel(0x0ffff029, bar + 0x100); + continue; + } + + if (i == fullbars) { + int o; + u32 mask; + + const unsigned long rem = memsize - i * 0x10000000; + if (!rem) { + ocd_writel(0x00000000, bar + 0x100); + continue; + } + + o = ffs(rem) - 1; + if (rem & ~(0x1 << o)) + o++; + mask = ((0x1 << o) & 0x0ffff000) - 0x1000; + ocd_writel(0x10000000 * i, bar); + ocd_writel(0x01000000 * i, bar + 0x140); + ocd_writel(0x00000029 | mask, bar + 0x100); + continue; + } + + ocd_writel(0x00000000, bar + 0x100); + } + + /* Finally, enable the PCI interupt */ +#if USB_IRQ > 7 + set_c0_intcontrol(1 << USB_IRQ); +#else + set_c0_status(1 << (USB_IRQ + 8)); +#endif + + ioport_resource.start = EXCITE_PHYS_PCI_IO; + ioport_resource.end = EXCITE_PHYS_PCI_IO + EXCITE_SIZE_PCI_IO - 1; + set_io_port_base((unsigned long) ioremap_nocache(EXCITE_PHYS_PCI_IO, EXCITE_SIZE_PCI_IO)); + register_pci_controller(&bx_controller); + return 0; +} + + +arch_initcall(basler_excite_pci_setup); |