Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

9 files changed, 60 insertions, 35 deletions

diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 948c648fea00..0fcd82f01388 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -154,30 +154,26 @@ static void dump_mem(const char *lvl, const char *str, unsigned long bottom,
 	set_fs(fs);
 }
 
-static void dump_instr(const char *lvl, struct pt_regs *regs)
+static void __dump_instr(const char *lvl, struct pt_regs *regs)
 {
 	unsigned long addr = instruction_pointer(regs);
 	const int thumb = thumb_mode(regs);
 	const int width = thumb ? 4 : 8;
-	mm_segment_t fs;
 	char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str;
 	int i;
 
 	/*
-	 * We need to switch to kernel mode so that we can use __get_user
-	 * to safely read from kernel space.  Note that we now dump the
-	 * code first, just in case the backtrace kills us.
+	 * Note that we now dump the code first, just in case the backtrace
+	 * kills us.
 	 */
-	fs = get_fs();
-	set_fs(KERNEL_DS);
 
 	for (i = -4; i < 1 + !!thumb; i++) {
 		unsigned int val, bad;
 
 		if (thumb)
-			bad = __get_user(val, &((u16 *)addr)[i]);
+			bad = get_user(val, &((u16 *)addr)[i]);
 		else
-			bad = __get_user(val, &((u32 *)addr)[i]);
+			bad = get_user(val, &((u32 *)addr)[i]);
 
 		if (!bad)
 			p += sprintf(p, i == 0 ? "(%0*x) " : "%0*x ",
@@ -188,8 +184,20 @@ static void dump_instr(const char *lvl, struct pt_regs *regs)
 		}
 	}
 	printk("%sCode: %s\n", lvl, str);
+}
 
-	set_fs(fs);
+static void dump_instr(const char *lvl, struct pt_regs *regs)
+{
+	mm_segment_t fs;
+
+	if (!user_mode(regs)) {
+		fs = get_fs();
+		set_fs(KERNEL_DS);
+		__dump_instr(lvl, regs);
+		set_fs(fs);
+	} else {
+		__dump_instr(lvl, regs);
+	}
 }
 
 #ifdef CONFIG_ARM_UNWIND
diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
index df7acea3747a..4674f1efbe7a 100644
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -575,6 +575,7 @@ static int __init ar7_register_uarts(void)
 	uart_port.type		= PORT_AR7;
 	uart_port.uartclk	= clk_get_rate(bus_clk) / 2;
 	uart_port.iotype	= UPIO_MEM32;
+	uart_port.flags		= UPF_FIXED_TYPE;
 	uart_port.regshift	= 2;
 
 	uart_port.line		= 0;
@@ -653,6 +654,10 @@ static int __init ar7_register_devices(void)
 	u32 val;
 	int res;
 
+	res = ar7_gpio_init();
+	if (res)
+		pr_warn("unable to register gpios: %d\n", res);
+
 	res = ar7_register_uarts();
 	if (res)
 		pr_err("unable to setup uart(s): %d\n", res);
diff --git a/arch/mips/ar7/prom.c b/arch/mips/ar7/prom.c
index 4fd83336131a..dd53987a690f 100644
--- a/arch/mips/ar7/prom.c
+++ b/arch/mips/ar7/prom.c
@@ -246,8 +246,6 @@ void __init prom_init(void)
 	ar7_init_cmdline(fw_arg0, (char **)fw_arg1);
 	ar7_init_env((struct env_var *)fw_arg2);
 	console_config();
-
-	ar7_gpio_init();
 }
 
 #define PORT(offset) (KSEG1ADDR(AR7_REGS_UART0 + (offset * 4)))
diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c
index 406072e26752..87dcac2447c8 100644
--- a/arch/mips/kernel/smp-bmips.c
+++ b/arch/mips/kernel/smp-bmips.c
@@ -591,11 +591,11 @@ void __init bmips_cpu_setup(void)
 
 		/* Flush and enable RAC */
 		cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG);
-		__raw_writel(cfg | 0x100, BMIPS_RAC_CONFIG);
+		__raw_writel(cfg | 0x100, cbr + BMIPS_RAC_CONFIG);
 		__raw_readl(cbr + BMIPS_RAC_CONFIG);
 
 		cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG);
-		__raw_writel(cfg | 0xf, BMIPS_RAC_CONFIG);
+		__raw_writel(cfg | 0xf, cbr + BMIPS_RAC_CONFIG);
 		__raw_readl(cbr + BMIPS_RAC_CONFIG);
 
 		cfg = __raw_readl(cbr + BMIPS_RAC_ADDRESS_RANGE);
diff --git a/arch/powerpc/kvm/book3s_64_mmu_hv.c b/arch/powerpc/kvm/book3s_64_mmu_hv.c
index 7c62967d672c..59247af5fd45 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_hv.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_hv.c
@@ -646,6 +646,16 @@ int kvmppc_book3s_hv_page_fault(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		hnow_v = hpte_new_to_old_v(hnow_v, hnow_r);
 		hnow_r = hpte_new_to_old_r(hnow_r);
 	}
+
+	/*
+	 * If the HPT is being resized, don't update the HPTE,
+	 * instead let the guest retry after the resize operation is complete.
+	 * The synchronization for hpte_setup_done test vs. set is provided
+	 * by the HPTE lock.
+	 */
+	if (!kvm->arch.hpte_setup_done)
+		goto out_unlock;
+
 	if ((hnow_v & ~HPTE_V_HVLOCK) != hpte[0] || hnow_r != hpte[1] ||
 	    rev->guest_rpte != hpte[2])
 		/* HPTE has been changed under us; let the guest retry */
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 73bf1ebfa78f..8d43cf205d34 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -2705,11 +2705,14 @@ static noinline void kvmppc_run_core(struct kvmppc_vcore *vc)
 	 * Hard-disable interrupts, and check resched flag and signals.
 	 * If we need to reschedule or deliver a signal, clean up
 	 * and return without going into the guest(s).
+	 * If the hpte_setup_done flag has been cleared, don't go into the
+	 * guest because that means a HPT resize operation is in progress.
 	 */
 	local_irq_disable();
 	hard_irq_disable();
 	if (lazy_irq_pending() || need_resched() ||
-	    recheck_signals(&core_info)) {
+	    recheck_signals(&core_info) ||
+	    (!kvm_is_radix(vc->kvm) && !vc->kvm->arch.hpte_setup_done)) {
 		local_irq_enable();
 		vc->vcore_state = VCORE_INACTIVE;
 		/* Unlock all except the primary vcore */
@@ -3078,7 +3081,7 @@ out:
 
 static int kvmppc_run_vcpu(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 {
-	int n_ceded, i;
+	int n_ceded, i, r;
 	struct kvmppc_vcore *vc;
 	struct kvm_vcpu *v;
 
@@ -3132,6 +3135,20 @@ static int kvmppc_run_vcpu(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 
 	while (vcpu->arch.state == KVMPPC_VCPU_RUNNABLE &&
 	       !signal_pending(current)) {
+		/* See if the HPT and VRMA are ready to go */
+		if (!kvm_is_radix(vcpu->kvm) &&
+		    !vcpu->kvm->arch.hpte_setup_done) {
+			spin_unlock(&vc->lock);
+			r = kvmppc_hv_setup_htab_rma(vcpu);
+			spin_lock(&vc->lock);
+			if (r) {
+				kvm_run->exit_reason = KVM_EXIT_FAIL_ENTRY;
+				kvm_run->fail_entry.hardware_entry_failure_reason = 0;
+				vcpu->arch.ret = r;
+				break;
+			}
+		}
+
 		if (vc->vcore_state == VCORE_PREEMPT && vc->runner == NULL)
 			kvmppc_vcore_end_preempt(vc);
 
@@ -3249,13 +3266,6 @@ static int kvmppc_vcpu_run_hv(struct kvm_run *run, struct kvm_vcpu *vcpu)
 	/* Order vcpus_running vs. hpte_setup_done, see kvmppc_alloc_reset_hpt */
 	smp_mb();
 
-	/* On the first time here, set up HTAB and VRMA */
-	if (!kvm_is_radix(vcpu->kvm) && !vcpu->kvm->arch.hpte_setup_done) {
-		r = kvmppc_hv_setup_htab_rma(vcpu);
-		if (r)
-			goto out;
-	}
-
 	flush_all_to_thread(current);
 
 	/* Save userspace EBB and other register values */
@@ -3303,7 +3313,6 @@ static int kvmppc_vcpu_run_hv(struct kvm_run *run, struct kvm_vcpu *vcpu)
 	}
 	mtspr(SPRN_VRSAVE, user_vrsave);
 
- out:
 	vcpu->arch.state = KVMPPC_VCPU_NOTREADY;
 	atomic_dec(&vcpu->kvm->arch.vcpus_running);
 	return r;
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index 236999c54edc..c60922a66385 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -22,7 +22,7 @@ obj-y			+= common.o
 obj-y			+= rdrand.o
 obj-y			+= match.o
 obj-y			+= bugs.o
-obj-y			+= aperfmperf.o
+obj-$(CONFIG_CPU_FREQ)	+= aperfmperf.o
 
 obj-$(CONFIG_PROC_FS)	+= proc.o
 obj-$(CONFIG_X86_FEATURE_NAMES) += capflags.o powerflags.o
diff --git a/arch/x86/kernel/cpu/aperfmperf.c b/arch/x86/kernel/cpu/aperfmperf.c
index 957813e0180d..0ee83321a313 100644
--- a/arch/x86/kernel/cpu/aperfmperf.c
+++ b/arch/x86/kernel/cpu/aperfmperf.c
@@ -42,6 +42,10 @@ static void aperfmperf_snapshot_khz(void *dummy)
 	s64 time_delta = ktime_ms_delta(now, s->time);
 	unsigned long flags;
 
+	/* Don't bother re-computing within the cache threshold time. */
+	if (time_delta < APERFMPERF_CACHE_THRESHOLD_MS)
+		return;
+
 	local_irq_save(flags);
 	rdmsrl(MSR_IA32_APERF, aperf);
 	rdmsrl(MSR_IA32_MPERF, mperf);
@@ -70,7 +74,6 @@ static void aperfmperf_snapshot_khz(void *dummy)
 
 unsigned int arch_freq_get_on_cpu(int cpu)
 {
-	s64 time_delta;
 	unsigned int khz;
 
 	if (!cpu_khz)
@@ -79,12 +82,6 @@ unsigned int arch_freq_get_on_cpu(int cpu)
 	if (!static_cpu_has(X86_FEATURE_APERFMPERF))
 		return 0;
 
-	/* Don't bother re-computing within the cache threshold time. */
-	time_delta = ktime_ms_delta(ktime_get(), per_cpu(samples.time, cpu));
-	khz = per_cpu(samples.khz, cpu);
-	if (khz && time_delta < APERFMPERF_CACHE_THRESHOLD_MS)
-		return khz;
-
 	smp_call_function_single(cpu, aperfmperf_snapshot_khz, NULL, 1);
 	khz = per_cpu(samples.khz, cpu);
 	if (khz)
diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c
index 4378a729b933..6b7e17bf0b71 100644
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -78,11 +78,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		seq_printf(m, "microcode\t: 0x%x\n", c->microcode);
 
 	if (cpu_has(c, X86_FEATURE_TSC)) {
-		unsigned int freq = arch_freq_get_on_cpu(cpu);
+		unsigned int freq = cpufreq_quick_get(cpu);
 
 		if (!freq)
-			freq = cpufreq_quick_get(cpu);
-		if (!freq)
 			freq = cpu_khz;
 		seq_printf(m, "cpu MHz\t\t: %u.%03u\n",
 			   freq / 1000, (freq % 1000));