summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorPaul Burton <paul.burton@imgtec.com>2017-06-17 13:52:49 -0700
committerRalf Baechle <ralf@linux-mips.org>2017-07-11 14:13:06 +0200
commit6e62a888029b4adbbc55894eaa8b929221113948 (patch)
tree02559b813b854521a7bbd49b69accc3fe029b559 /arch
parent4d2804b7d76ef6e6cd85be74999548276d23067f (diff)
downloadlinux-6e62a888029b4adbbc55894eaa8b929221113948.tar.gz
linux-6e62a888029b4adbbc55894eaa8b929221113948.tar.bz2
linux-6e62a888029b4adbbc55894eaa8b929221113948.zip
MIPS: generic: Support MIPS Boston development boards
Add support for the MIPS Boston development board to generic kernels, which essentially amounts to: - Adding the device tree source for the MIPS Boston board. - Adding a Kconfig fragment which enables the appropriate drivers for the MIPS Boston board. With these changes in place generic kernels will support the board by default, and kernels with only the drivers needed for Boston enabled can be configured by setting BOARDS=boston during configuration. For example: $ make ARCH=mips 64r6el_defconfig BOARDS=boston Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16485/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch')
-rw-r--r--arch/mips/boot/dts/img/Makefile2
-rw-r--r--arch/mips/boot/dts/img/boston.dts224
-rw-r--r--arch/mips/configs/generic/board-boston.config48
-rw-r--r--arch/mips/generic/Kconfig12
-rw-r--r--arch/mips/generic/vmlinux.its.S25
5 files changed, 311 insertions, 0 deletions
diff --git a/arch/mips/boot/dts/img/Makefile b/arch/mips/boot/dts/img/Makefile
index c178cf56f5b8..3d70958d0f5a 100644
--- a/arch/mips/boot/dts/img/Makefile
+++ b/arch/mips/boot/dts/img/Makefile
@@ -1,3 +1,5 @@
+dtb-$(CONFIG_FIT_IMAGE_FDT_BOSTON) += boston.dtb
+
dtb-$(CONFIG_MACH_PISTACHIO) += pistachio_marduk.dtb
obj-$(CONFIG_MACH_PISTACHIO) += pistachio_marduk.dtb.o
diff --git a/arch/mips/boot/dts/img/boston.dts b/arch/mips/boot/dts/img/boston.dts
new file mode 100644
index 000000000000..53bfa29a7093
--- /dev/null
+++ b/arch/mips/boot/dts/img/boston.dts
@@ -0,0 +1,224 @@
+/dts-v1/;
+
+#include <dt-bindings/clock/boston-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "img,boston";
+
+ chosen {
+ stdout-path = "uart0:115200";
+ };
+
+ aliases {
+ uart0 = &uart0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "img,mips";
+ reg = <0>;
+ clocks = <&clk_boston BOSTON_CLK_CPU>;
+ };
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ pci0: pci@10000000 {
+ compatible = "xlnx,axi-pcie-host-1.00.a";
+ device_type = "pci";
+ reg = <0x10000000 0x2000000>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 2 IRQ_TYPE_LEVEL_HIGH>;
+
+ ranges = <0x02000000 0 0x40000000
+ 0x40000000 0 0x40000000>;
+
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pci0_intc 1>,
+ <0 0 0 2 &pci0_intc 2>,
+ <0 0 0 3 &pci0_intc 3>,
+ <0 0 0 4 &pci0_intc 4>;
+
+ pci0_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pci1: pci@12000000 {
+ compatible = "xlnx,axi-pcie-host-1.00.a";
+ device_type = "pci";
+ reg = <0x12000000 0x2000000>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 1 IRQ_TYPE_LEVEL_HIGH>;
+
+ ranges = <0x02000000 0 0x20000000
+ 0x20000000 0 0x20000000>;
+
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pci1_intc 1>,
+ <0 0 0 2 &pci1_intc 2>,
+ <0 0 0 3 &pci1_intc 3>,
+ <0 0 0 4 &pci1_intc 4>;
+
+ pci1_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pci2: pci@14000000 {
+ compatible = "xlnx,axi-pcie-host-1.00.a";
+ device_type = "pci";
+ reg = <0x14000000 0x2000000>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 0 IRQ_TYPE_LEVEL_HIGH>;
+
+ ranges = <0x02000000 0 0x16000000
+ 0x16000000 0 0x100000>;
+
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pci2_intc 1>,
+ <0 0 0 2 &pci2_intc 2>,
+ <0 0 0 3 &pci2_intc 3>,
+ <0 0 0 4 &pci2_intc 4>;
+
+ pci2_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+
+ pci2_root@0,0,0 {
+ compatible = "pci10ee,7021";
+ reg = <0x00000000 0 0 0 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ eg20t_bridge@1,0,0 {
+ compatible = "pci8086,8800";
+ reg = <0x00010000 0 0 0 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ eg20t_mac@2,0,1 {
+ compatible = "pci8086,8802";
+ reg = <0x00020100 0 0 0 0>;
+ phy-reset-gpios = <&eg20t_gpio 6
+ GPIO_ACTIVE_LOW>;
+ };
+
+ eg20t_gpio: eg20t_gpio@2,0,2 {
+ compatible = "pci8086,8803";
+ reg = <0x00020200 0 0 0 0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ eg20t_i2c@2,12,2 {
+ compatible = "pci8086,8817";
+ reg = <0x00026200 0 0 0 0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@0x68 {
+ compatible = "st,m41t81s";
+ reg = <0x68>;
+ };
+ };
+ };
+ };
+ };
+
+ gic: interrupt-controller@16120000 {
+ compatible = "mti,gic";
+ reg = <0x16120000 0x20000>;
+
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ timer {
+ compatible = "mti,gic-timer";
+ interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+ clocks = <&clk_boston BOSTON_CLK_CPU>;
+ };
+ };
+
+ cdmm@16140000 {
+ compatible = "mti,mips-cdmm";
+ reg = <0x16140000 0x8000>;
+ };
+
+ cpc@16200000 {
+ compatible = "mti,mips-cpc";
+ reg = <0x16200000 0x8000>;
+ };
+
+ plat_regs: system-controller@17ffd000 {
+ compatible = "img,boston-platform-regs", "syscon";
+ reg = <0x17ffd000 0x1000>;
+
+ clk_boston: clock {
+ compatible = "img,boston-clock";
+ #clock-cells = <1>;
+ };
+ };
+
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&plat_regs>;
+ offset = <0x10>;
+ mask = <0x10>;
+ };
+
+ uart0: uart@17ffe000 {
+ compatible = "ns16550a";
+ reg = <0x17ffe000 0x1000>;
+ reg-shift = <2>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&clk_boston BOSTON_CLK_SYS>;
+ };
+
+ lcd: lcd@17fff000 {
+ compatible = "img,boston-lcd";
+ reg = <0x17fff000 0x8>;
+ };
+};
diff --git a/arch/mips/configs/generic/board-boston.config b/arch/mips/configs/generic/board-boston.config
new file mode 100644
index 000000000000..19560a45b683
--- /dev/null
+++ b/arch/mips/configs/generic/board-boston.config
@@ -0,0 +1,48 @@
+CONFIG_FIT_IMAGE_FDT_BOSTON=y
+
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+
+CONFIG_AUXDISPLAY=y
+CONFIG_IMG_ASCII_LCD=y
+
+CONFIG_COMMON_CLK_BOSTON=y
+
+CONFIG_DMADEVICES=y
+CONFIG_PCH_DMA=y
+
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_PCH=y
+
+CONFIG_I2C=y
+CONFIG_I2C_EG20T=y
+
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PCI=y
+
+CONFIG_NETDEVICES=y
+CONFIG_PCH_GBE=y
+
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCIE_XILINX=y
+
+CONFIG_PCH_PHUB=y
+
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_M41T80=y
+
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+
+CONFIG_SPI=y
+CONFIG_SPI_TOPCLIFF_PCH=y
+
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig
index 446b7c68133d..51ffbbaddee2 100644
--- a/arch/mips/generic/Kconfig
+++ b/arch/mips/generic/Kconfig
@@ -16,6 +16,8 @@ config YAMON_DT_SHIM
and you wish to include code which helps translate various
YAMON-provided environment variables into a device tree properties.
+comment "Legacy (non-UHI/non-FIT) Boards"
+
config LEGACY_BOARD_SEAD3
bool "Support MIPS SEAD-3 boards"
select LEGACY_BOARDS
@@ -24,4 +26,14 @@ config LEGACY_BOARD_SEAD3
Enable this to include support for booting on MIPS SEAD-3 FPGA-based
development boards, which boot using a legacy boot protocol.
+comment "FIT/UHI Boards"
+
+config FIT_IMAGE_FDT_BOSTON
+ bool "Include FDT for MIPS Boston boards"
+ help
+ Enable this to include the FDT for the MIPS Boston development board
+ from Imagination Technologies in the FIT kernel image. You should
+ enable this if you wish to boot on a MIPS Boston board, as it is
+ expected by the bootloader.
+
endif
diff --git a/arch/mips/generic/vmlinux.its.S b/arch/mips/generic/vmlinux.its.S
index f67fbf1c8541..3390e2f80b80 100644
--- a/arch/mips/generic/vmlinux.its.S
+++ b/arch/mips/generic/vmlinux.its.S
@@ -29,3 +29,28 @@
};
};
};
+
+#ifdef CONFIG_FIT_IMAGE_FDT_BOSTON
+/ {
+ images {
+ fdt@boston {
+ description = "img,boston Device Tree";
+ data = /incbin/("boot/dts/img/boston.dtb");
+ type = "flat_dt";
+ arch = "mips";
+ compression = "none";
+ hash@0 {
+ algo = "sha1";
+ };
+ };
+ };
+
+ configurations {
+ conf@boston {
+ description = "Boston Linux kernel";
+ kernel = "kernel@0";
+ fdt = "fdt@boston";
+ };
+ };
+};
+#endif /* CONFIG_FIT_IMAGE_FDT_BOSTON */