Merge branch 'linus' into x86/setup-lzma

Conflicts:
	init/do_mounts_rd.c

1 files changed, 0 insertions, 812 deletions

diff --git a/drivers/acpi/dispatcher/dsobject.c b/drivers/acpi/dispatcher/dsobject.c
deleted file mode 100644
index 4f08e599d07e..000000000000
--- a/drivers/acpi/dispatcher/dsobject.c
+++ /dev/null
@@ -1,812 +0,0 @@
-/******************************************************************************
- *
- * Module Name: dsobject - Dispatcher object management routines
- *
- *****************************************************************************/
-
-/*
- * Copyright (C) 2000 - 2008, Intel Corp.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions, and the following disclaimer,
- *    without modification.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- *    substantially similar to the "NO WARRANTY" disclaimer below
- *    ("Disclaimer") and any redistribution must be conditioned upon
- *    including a substantially similar Disclaimer requirement for further
- *    binary redistribution.
- * 3. Neither the names of the above-listed copyright holders nor the names
- *    of any contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * NO WARRANTY
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGES.
- */
-
-#include <acpi/acpi.h>
-#include <acpi/acparser.h>
-#include <acpi/amlcode.h>
-#include <acpi/acdispat.h>
-#include <acpi/acnamesp.h>
-#include <acpi/acinterp.h>
-
-#define _COMPONENT          ACPI_DISPATCHER
-ACPI_MODULE_NAME("dsobject")
-
-/* Local prototypes */
-static acpi_status
-acpi_ds_build_internal_object(struct acpi_walk_state *walk_state,
-			      union acpi_parse_object *op,
-			      union acpi_operand_object **obj_desc_ptr);
-
-#ifndef ACPI_NO_METHOD_EXECUTION
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ds_build_internal_object
- *
- * PARAMETERS:  walk_state      - Current walk state
- *              Op              - Parser object to be translated
- *              obj_desc_ptr    - Where the ACPI internal object is returned
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Translate a parser Op object to the equivalent namespace object
- *              Simple objects are any objects other than a package object!
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_ds_build_internal_object(struct acpi_walk_state *walk_state,
-			      union acpi_parse_object *op,
-			      union acpi_operand_object **obj_desc_ptr)
-{
-	union acpi_operand_object *obj_desc;
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE(ds_build_internal_object);
-
-	*obj_desc_ptr = NULL;
-	if (op->common.aml_opcode == AML_INT_NAMEPATH_OP) {
-		/*
-		 * This is a named object reference. If this name was
-		 * previously looked up in the namespace, it was stored in this op.
-		 * Otherwise, go ahead and look it up now
-		 */
-		if (!op->common.node) {
-			status = acpi_ns_lookup(walk_state->scope_info,
-						op->common.value.string,
-						ACPI_TYPE_ANY,
-						ACPI_IMODE_EXECUTE,
-						ACPI_NS_SEARCH_PARENT |
-						ACPI_NS_DONT_OPEN_SCOPE, NULL,
-						ACPI_CAST_INDIRECT_PTR(struct
-								       acpi_namespace_node,
-								       &(op->
-									 common.
-									 node)));
-			if (ACPI_FAILURE(status)) {
-
-				/* Check if we are resolving a named reference within a package */
-
-				if ((status == AE_NOT_FOUND)
-				    && (acpi_gbl_enable_interpreter_slack)
-				    &&
-				    ((op->common.parent->common.aml_opcode ==
-				      AML_PACKAGE_OP)
-				     || (op->common.parent->common.aml_opcode ==
-					 AML_VAR_PACKAGE_OP))) {
-					/*
-					 * We didn't find the target and we are populating elements
-					 * of a package - ignore if slack enabled. Some ASL code
-					 * contains dangling invalid references in packages and
-					 * expects that no exception will be issued. Leave the
-					 * element as a null element. It cannot be used, but it
-					 * can be overwritten by subsequent ASL code - this is
-					 * typically the case.
-					 */
-					ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-							  "Ignoring unresolved reference in package [%4.4s]\n",
-							  walk_state->
-							  scope_info->scope.
-							  node->name.ascii));
-
-					return_ACPI_STATUS(AE_OK);
-				} else {
-					ACPI_ERROR_NAMESPACE(op->common.value.
-							     string, status);
-				}
-
-				return_ACPI_STATUS(status);
-			}
-		}
-
-		/* Special object resolution for elements of a package */
-
-		if ((op->common.parent->common.aml_opcode == AML_PACKAGE_OP) ||
-		    (op->common.parent->common.aml_opcode ==
-		     AML_VAR_PACKAGE_OP)) {
-			/*
-			 * Attempt to resolve the node to a value before we insert it into
-			 * the package. If this is a reference to a common data type,
-			 * resolve it immediately. According to the ACPI spec, package
-			 * elements can only be "data objects" or method references.
-			 * Attempt to resolve to an Integer, Buffer, String or Package.
-			 * If cannot, return the named reference (for things like Devices,
-			 * Methods, etc.) Buffer Fields and Fields will resolve to simple
-			 * objects (int/buf/str/pkg).
-			 *
-			 * NOTE: References to things like Devices, Methods, Mutexes, etc.
-			 * will remain as named references. This behavior is not described
-			 * in the ACPI spec, but it appears to be an oversight.
-			 */
-			obj_desc =
-			    ACPI_CAST_PTR(union acpi_operand_object,
-					  op->common.node);
-
-			status =
-			    acpi_ex_resolve_node_to_value(ACPI_CAST_INDIRECT_PTR
-							  (struct
-							   acpi_namespace_node,
-							   &obj_desc),
-							  walk_state);
-			if (ACPI_FAILURE(status)) {
-				return_ACPI_STATUS(status);
-			}
-
-			switch (op->common.node->type) {
-				/*
-				 * For these types, we need the actual node, not the subobject.
-				 * However, the subobject did not get an extra reference count above.
-				 *
-				 * TBD: should ex_resolve_node_to_value be changed to fix this?
-				 */
-			case ACPI_TYPE_DEVICE:
-			case ACPI_TYPE_THERMAL:
-
-				acpi_ut_add_reference(op->common.node->object);
-
-				/*lint -fallthrough */
-				/*
-				 * For these types, we need the actual node, not the subobject.
-				 * The subobject got an extra reference count in ex_resolve_node_to_value.
-				 */
-			case ACPI_TYPE_MUTEX:
-			case ACPI_TYPE_METHOD:
-			case ACPI_TYPE_POWER:
-			case ACPI_TYPE_PROCESSOR:
-			case ACPI_TYPE_EVENT:
-			case ACPI_TYPE_REGION:
-
-				/* We will create a reference object for these types below */
-				break;
-
-			default:
-				/*
-				 * All other types - the node was resolved to an actual
-				 * object, we are done.
-				 */
-				goto exit;
-			}
-		}
-	}
-
-	/* Create and init a new internal ACPI object */
-
-	obj_desc = acpi_ut_create_internal_object((acpi_ps_get_opcode_info
-						   (op->common.aml_opcode))->
-						  object_type);
-	if (!obj_desc) {
-		return_ACPI_STATUS(AE_NO_MEMORY);
-	}
-
-	status =
-	    acpi_ds_init_object_from_op(walk_state, op, op->common.aml_opcode,
-					&obj_desc);
-	if (ACPI_FAILURE(status)) {
-		acpi_ut_remove_reference(obj_desc);
-		return_ACPI_STATUS(status);
-	}
-
-      exit:
-	*obj_desc_ptr = obj_desc;
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ds_build_internal_buffer_obj
- *
- * PARAMETERS:  walk_state      - Current walk state
- *              Op              - Parser object to be translated
- *              buffer_length   - Length of the buffer
- *              obj_desc_ptr    - Where the ACPI internal object is returned
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Translate a parser Op package object to the equivalent
- *              namespace object
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ds_build_internal_buffer_obj(struct acpi_walk_state *walk_state,
-				  union acpi_parse_object *op,
-				  u32 buffer_length,
-				  union acpi_operand_object **obj_desc_ptr)
-{
-	union acpi_parse_object *arg;
-	union acpi_operand_object *obj_desc;
-	union acpi_parse_object *byte_list;
-	u32 byte_list_length = 0;
-
-	ACPI_FUNCTION_TRACE(ds_build_internal_buffer_obj);
-
-	/*
-	 * If we are evaluating a Named buffer object "Name (xxxx, Buffer)".
-	 * The buffer object already exists (from the NS node), otherwise it must
-	 * be created.
-	 */
-	obj_desc = *obj_desc_ptr;
-	if (!obj_desc) {
-
-		/* Create a new buffer object */
-
-		obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_BUFFER);
-		*obj_desc_ptr = obj_desc;
-		if (!obj_desc) {
-			return_ACPI_STATUS(AE_NO_MEMORY);
-		}
-	}
-
-	/*
-	 * Second arg is the buffer data (optional) byte_list can be either
-	 * individual bytes or a string initializer.  In either case, a
-	 * byte_list appears in the AML.
-	 */
-	arg = op->common.value.arg;	/* skip first arg */
-
-	byte_list = arg->named.next;
-	if (byte_list) {
-		if (byte_list->common.aml_opcode != AML_INT_BYTELIST_OP) {
-			ACPI_ERROR((AE_INFO,
-				    "Expecting bytelist, got AML opcode %X in op %p",
-				    byte_list->common.aml_opcode, byte_list));
-
-			acpi_ut_remove_reference(obj_desc);
-			return (AE_TYPE);
-		}
-
-		byte_list_length = (u32) byte_list->common.value.integer;
-	}
-
-	/*
-	 * The buffer length (number of bytes) will be the larger of:
-	 * 1) The specified buffer length and
-	 * 2) The length of the initializer byte list
-	 */
-	obj_desc->buffer.length = buffer_length;
-	if (byte_list_length > buffer_length) {
-		obj_desc->buffer.length = byte_list_length;
-	}
-
-	/* Allocate the buffer */
-
-	if (obj_desc->buffer.length == 0) {
-		obj_desc->buffer.pointer = NULL;
-		ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
-				  "Buffer defined with zero length in AML, creating\n"));
-	} else {
-		obj_desc->buffer.pointer =
-		    ACPI_ALLOCATE_ZEROED(obj_desc->buffer.length);
-		if (!obj_desc->buffer.pointer) {
-			acpi_ut_delete_object_desc(obj_desc);
-			return_ACPI_STATUS(AE_NO_MEMORY);
-		}
-
-		/* Initialize buffer from the byte_list (if present) */
-
-		if (byte_list) {
-			ACPI_MEMCPY(obj_desc->buffer.pointer,
-				    byte_list->named.data, byte_list_length);
-		}
-	}
-
-	obj_desc->buffer.flags |= AOPOBJ_DATA_VALID;
-	op->common.node = ACPI_CAST_PTR(struct acpi_namespace_node, obj_desc);
-	return_ACPI_STATUS(AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ds_build_internal_package_obj
- *
- * PARAMETERS:  walk_state      - Current walk state
- *              Op              - Parser object to be translated
- *              element_count   - Number of elements in the package - this is
- *                                the num_elements argument to Package()
- *              obj_desc_ptr    - Where the ACPI internal object is returned
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Translate a parser Op package object to the equivalent
- *              namespace object
- *
- * NOTE: The number of elements in the package will be always be the num_elements
- * count, regardless of the number of elements in the package list. If
- * num_elements is smaller, only that many package list elements are used.
- * if num_elements is larger, the Package object is padded out with
- * objects of type Uninitialized (as per ACPI spec.)
- *
- * Even though the ASL compilers do not allow num_elements to be smaller
- * than the Package list length (for the fixed length package opcode), some
- * BIOS code modifies the AML on the fly to adjust the num_elements, and
- * this code compensates for that. This also provides compatibility with
- * other AML interpreters.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ds_build_internal_package_obj(struct acpi_walk_state *walk_state,
-				   union acpi_parse_object *op,
-				   u32 element_count,
-				   union acpi_operand_object **obj_desc_ptr)
-{
-	union acpi_parse_object *arg;
-	union acpi_parse_object *parent;
-	union acpi_operand_object *obj_desc = NULL;
-	acpi_status status = AE_OK;
-	unsigned i;
-	u16 index;
-	u16 reference_count;
-
-	ACPI_FUNCTION_TRACE(ds_build_internal_package_obj);
-
-	/* Find the parent of a possibly nested package */
-
-	parent = op->common.parent;
-	while ((parent->common.aml_opcode == AML_PACKAGE_OP) ||
-	       (parent->common.aml_opcode == AML_VAR_PACKAGE_OP)) {
-		parent = parent->common.parent;
-	}
-
-	/*
-	 * If we are evaluating a Named package object "Name (xxxx, Package)",
-	 * the package object already exists, otherwise it must be created.
-	 */
-	obj_desc = *obj_desc_ptr;
-	if (!obj_desc) {
-		obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_PACKAGE);
-		*obj_desc_ptr = obj_desc;
-		if (!obj_desc) {
-			return_ACPI_STATUS(AE_NO_MEMORY);
-		}
-
-		obj_desc->package.node = parent->common.node;
-	}
-
-	/*
-	 * Allocate the element array (array of pointers to the individual
-	 * objects) based on the num_elements parameter. Add an extra pointer slot
-	 * so that the list is always null terminated.
-	 */
-	obj_desc->package.elements = ACPI_ALLOCATE_ZEROED(((acpi_size)
-							   element_count +
-							   1) * sizeof(void *));
-
-	if (!obj_desc->package.elements) {
-		acpi_ut_delete_object_desc(obj_desc);
-		return_ACPI_STATUS(AE_NO_MEMORY);
-	}
-
-	obj_desc->package.count = element_count;
-
-	/*
-	 * Initialize the elements of the package, up to the num_elements count.
-	 * Package is automatically padded with uninitialized (NULL) elements
-	 * if num_elements is greater than the package list length. Likewise,
-	 * Package is truncated if num_elements is less than the list length.
-	 */
-	arg = op->common.value.arg;
-	arg = arg->common.next;
-	for (i = 0; arg && (i < element_count); i++) {
-		if (arg->common.aml_opcode == AML_INT_RETURN_VALUE_OP) {
-			if (arg->common.node->type == ACPI_TYPE_METHOD) {
-				/*
-				 * A method reference "looks" to the parser to be a method
-				 * invocation, so we special case it here
-				 */
-				arg->common.aml_opcode = AML_INT_NAMEPATH_OP;
-				status =
-				    acpi_ds_build_internal_object(walk_state,
-								  arg,
-								  &obj_desc->
-								  package.
-								  elements[i]);
-			} else {
-				/* This package element is already built, just get it */
-
-				obj_desc->package.elements[i] =
-				    ACPI_CAST_PTR(union acpi_operand_object,
-						  arg->common.node);
-			}
-		} else {
-			status = acpi_ds_build_internal_object(walk_state, arg,
-							       &obj_desc->
-							       package.
-							       elements[i]);
-		}
-
-		if (*obj_desc_ptr) {
-
-			/* Existing package, get existing reference count */
-
-			reference_count =
-			    (*obj_desc_ptr)->common.reference_count;
-			if (reference_count > 1) {
-
-				/* Make new element ref count match original ref count */
-
-				for (index = 0; index < (reference_count - 1);
-				     index++) {
-					acpi_ut_add_reference((obj_desc->
-							       package.
-							       elements[i]));
-				}
-			}
-		}
-
-		arg = arg->common.next;
-	}
-
-	/* Check for match between num_elements and actual length of package_list */
-
-	if (arg) {
-		/*
-		 * num_elements was exhausted, but there are remaining elements in the
-		 * package_list.
-		 *
-		 * Note: technically, this is an error, from ACPI spec: "It is an error
-		 * for NumElements to be less than the number of elements in the
-		 * PackageList". However, for now, we just print an error message and
-		 * no exception is returned.
-		 */
-		while (arg) {
-
-			/* Find out how many elements there really are */
-
-			i++;
-			arg = arg->common.next;
-		}
-
-		ACPI_WARNING((AE_INFO,
-			    "Package List length (%X) larger than NumElements count (%X), truncated\n",
-			    i, element_count));
-	} else if (i < element_count) {
-		/*
-		 * Arg list (elements) was exhausted, but we did not reach num_elements count.
-		 * Note: this is not an error, the package is padded out with NULLs.
-		 */
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Package List length (%X) smaller than NumElements count (%X), padded with null elements\n",
-				  i, element_count));
-	}
-
-	obj_desc->package.flags |= AOPOBJ_DATA_VALID;
-	op->common.node = ACPI_CAST_PTR(struct acpi_namespace_node, obj_desc);
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ds_create_node
- *
- * PARAMETERS:  walk_state      - Current walk state
- *              Node            - NS Node to be initialized
- *              Op              - Parser object to be translated
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Create the object to be associated with a namespace node
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ds_create_node(struct acpi_walk_state *walk_state,
-		    struct acpi_namespace_node *node,
-		    union acpi_parse_object *op)
-{
-	acpi_status status;
-	union acpi_operand_object *obj_desc;
-
-	ACPI_FUNCTION_TRACE_PTR(ds_create_node, op);
-
-	/*
-	 * Because of the execution pass through the non-control-method
-	 * parts of the table, we can arrive here twice.  Only init
-	 * the named object node the first time through
-	 */
-	if (acpi_ns_get_attached_object(node)) {
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	if (!op->common.value.arg) {
-
-		/* No arguments, there is nothing to do */
-
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	/* Build an internal object for the argument(s) */
-
-	status = acpi_ds_build_internal_object(walk_state, op->common.value.arg,
-					       &obj_desc);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/* Re-type the object according to its argument */
-
-	node->type = ACPI_GET_OBJECT_TYPE(obj_desc);
-
-	/* Attach obj to node */
-
-	status = acpi_ns_attach_object(node, obj_desc, node->type);
-
-	/* Remove local reference to the object */
-
-	acpi_ut_remove_reference(obj_desc);
-	return_ACPI_STATUS(status);
-}
-
-#endif				/* ACPI_NO_METHOD_EXECUTION */
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ds_init_object_from_op
- *
- * PARAMETERS:  walk_state      - Current walk state
- *              Op              - Parser op used to init the internal object
- *              Opcode          - AML opcode associated with the object
- *              ret_obj_desc    - Namespace object to be initialized
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Initialize a namespace object from a parser Op and its
- *              associated arguments.  The namespace object is a more compact
- *              representation of the Op and its arguments.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ds_init_object_from_op(struct acpi_walk_state *walk_state,
-			    union acpi_parse_object *op,
-			    u16 opcode,
-			    union acpi_operand_object **ret_obj_desc)
-{
-	const struct acpi_opcode_info *op_info;
-	union acpi_operand_object *obj_desc;
-	acpi_status status = AE_OK;
-
-	ACPI_FUNCTION_TRACE(ds_init_object_from_op);
-
-	obj_desc = *ret_obj_desc;
-	op_info = acpi_ps_get_opcode_info(opcode);
-	if (op_info->class == AML_CLASS_UNKNOWN) {
-
-		/* Unknown opcode */
-
-		return_ACPI_STATUS(AE_TYPE);
-	}
-
-	/* Perform per-object initialization */
-
-	switch (ACPI_GET_OBJECT_TYPE(obj_desc)) {
-	case ACPI_TYPE_BUFFER:
-
-		/*
-		 * Defer evaluation of Buffer term_arg operand
-		 */
-		obj_desc->buffer.node =
-		    ACPI_CAST_PTR(struct acpi_namespace_node,
-				  walk_state->operands[0]);
-		obj_desc->buffer.aml_start = op->named.data;
-		obj_desc->buffer.aml_length = op->named.length;
-		break;
-
-	case ACPI_TYPE_PACKAGE:
-
-		/*
-		 * Defer evaluation of Package term_arg operand
-		 */
-		obj_desc->package.node =
-		    ACPI_CAST_PTR(struct acpi_namespace_node,
-				  walk_state->operands[0]);
-		obj_desc->package.aml_start = op->named.data;
-		obj_desc->package.aml_length = op->named.length;
-		break;
-
-	case ACPI_TYPE_INTEGER:
-
-		switch (op_info->type) {
-		case AML_TYPE_CONSTANT:
-			/*
-			 * Resolve AML Constants here - AND ONLY HERE!
-			 * All constants are integers.
-			 * We mark the integer with a flag that indicates that it started
-			 * life as a constant -- so that stores to constants will perform
-			 * as expected (noop). zero_op is used as a placeholder for optional
-			 * target operands.
-			 */
-			obj_desc->common.flags = AOPOBJ_AML_CONSTANT;
-
-			switch (opcode) {
-			case AML_ZERO_OP:
-
-				obj_desc->integer.value = 0;
-				break;
-
-			case AML_ONE_OP:
-
-				obj_desc->integer.value = 1;
-				break;
-
-			case AML_ONES_OP:
-
-				obj_desc->integer.value = ACPI_INTEGER_MAX;
-
-				/* Truncate value if we are executing from a 32-bit ACPI table */
-
-#ifndef ACPI_NO_METHOD_EXECUTION
-				acpi_ex_truncate_for32bit_table(obj_desc);
-#endif
-				break;
-
-			case AML_REVISION_OP:
-
-				obj_desc->integer.value = ACPI_CA_VERSION;
-				break;
-
-			default:
-
-				ACPI_ERROR((AE_INFO,
-					    "Unknown constant opcode %X",
-					    opcode));
-				status = AE_AML_OPERAND_TYPE;
-				break;
-			}
-			break;
-
-		case AML_TYPE_LITERAL:
-
-			obj_desc->integer.value = op->common.value.integer;
-#ifndef ACPI_NO_METHOD_EXECUTION
-			acpi_ex_truncate_for32bit_table(obj_desc);
-#endif
-			break;
-
-		default:
-			ACPI_ERROR((AE_INFO, "Unknown Integer type %X",
-				    op_info->type));
-			status = AE_AML_OPERAND_TYPE;
-			break;
-		}
-		break;
-
-	case ACPI_TYPE_STRING:
-
-		obj_desc->string.pointer = op->common.value.string;
-		obj_desc->string.length =
-		    (u32) ACPI_STRLEN(op->common.value.string);
-
-		/*
-		 * The string is contained in the ACPI table, don't ever try
-		 * to delete it
-		 */
-		obj_desc->common.flags |= AOPOBJ_STATIC_POINTER;
-		break;
-
-	case ACPI_TYPE_METHOD:
-		break;
-
-	case ACPI_TYPE_LOCAL_REFERENCE:
-
-		switch (op_info->type) {
-		case AML_TYPE_LOCAL_VARIABLE:
-
-			/* Local ID (0-7) is (AML opcode - base AML_LOCAL_OP) */
-
-			obj_desc->reference.value = opcode - AML_LOCAL_OP;
-			obj_desc->reference.class = ACPI_REFCLASS_LOCAL;
-
-#ifndef ACPI_NO_METHOD_EXECUTION
-			status =
-			    acpi_ds_method_data_get_node(ACPI_REFCLASS_LOCAL,
-							 obj_desc->reference.
-							 value, walk_state,
-							 ACPI_CAST_INDIRECT_PTR
-							 (struct
-							  acpi_namespace_node,
-							  &obj_desc->reference.
-							  object));
-#endif
-			break;
-
-		case AML_TYPE_METHOD_ARGUMENT:
-
-			/* Arg ID (0-6) is (AML opcode - base AML_ARG_OP) */
-
-			obj_desc->reference.value = opcode - AML_ARG_OP;
-			obj_desc->reference.class = ACPI_REFCLASS_ARG;
-
-#ifndef ACPI_NO_METHOD_EXECUTION
-			status = acpi_ds_method_data_get_node(ACPI_REFCLASS_ARG,
-							      obj_desc->
-							      reference.value,
-							      walk_state,
-							      ACPI_CAST_INDIRECT_PTR
-							      (struct
-							       acpi_namespace_node,
-							       &obj_desc->
-							       reference.
-							       object));
-#endif
-			break;
-
-		default:	/* Object name or Debug object */
-
-			switch (op->common.aml_opcode) {
-			case AML_INT_NAMEPATH_OP:
-
-				/* Node was saved in Op */
-
-				obj_desc->reference.node = op->common.node;
-				obj_desc->reference.object =
-				    op->common.node->object;
-				obj_desc->reference.class = ACPI_REFCLASS_NAME;
-				break;
-
-			case AML_DEBUG_OP:
-
-				obj_desc->reference.class = ACPI_REFCLASS_DEBUG;
-				break;
-
-			default:
-
-				ACPI_ERROR((AE_INFO,
-					    "Unimplemented reference type for AML opcode: %4.4X",
-					    opcode));
-				return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
-			}
-			break;
-		}
-		break;
-
-	default:
-
-		ACPI_ERROR((AE_INFO, "Unimplemented data type: %X",
-			    ACPI_GET_OBJECT_TYPE(obj_desc)));
-
-		status = AE_AML_OPERAND_TYPE;
-		break;
-	}
-
-	return_ACPI_STATUS(status);
-}