Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 756 insertions, 0 deletions

diff --git a/drivers/acpi/events/evgpe.c b/drivers/acpi/events/evgpe.c
new file mode 100644
index 000000000000..118d72ac7c76
--- /dev/null
+++ b/drivers/acpi/events/evgpe.c
@@ -0,0 +1,756 @@
+/******************************************************************************
+ *
+ * Module Name: evgpe - General Purpose Event handling and dispatch
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include <acpi/acevents.h>
+#include <acpi/acnamesp.h>
+
+#define _COMPONENT          ACPI_EVENTS
+	 ACPI_MODULE_NAME    ("evgpe")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_set_gpe_type
+ *
+ * PARAMETERS:  gpe_event_info          - GPE to set
+ *              Type                    - New type
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Sets the new type for the GPE (wake, run, or wake/run)
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ev_set_gpe_type (
+	struct acpi_gpe_event_info      *gpe_event_info,
+	u8                              type)
+{
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE ("ev_set_gpe_type");
+
+
+	/* Validate type and update register enable masks */
+
+	switch (type) {
+	case ACPI_GPE_TYPE_WAKE:
+	case ACPI_GPE_TYPE_RUNTIME:
+	case ACPI_GPE_TYPE_WAKE_RUN:
+		break;
+
+	default:
+		return_ACPI_STATUS (AE_BAD_PARAMETER);
+	}
+
+	/* Disable the GPE if currently enabled */
+
+	status = acpi_ev_disable_gpe (gpe_event_info);
+
+	/* Type was validated above */
+
+	gpe_event_info->flags &= ~ACPI_GPE_TYPE_MASK; /* Clear type bits */
+	gpe_event_info->flags |= type;              /* Insert type */
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_update_gpe_enable_masks
+ *
+ * PARAMETERS:  gpe_event_info          - GPE to update
+ *              Type                    - What to do: ACPI_GPE_DISABLE or
+ *                                        ACPI_GPE_ENABLE
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Updates GPE register enable masks based on the GPE type
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ev_update_gpe_enable_masks (
+	struct acpi_gpe_event_info      *gpe_event_info,
+	u8                              type)
+{
+	struct acpi_gpe_register_info   *gpe_register_info;
+	u8                              register_bit;
+
+
+	ACPI_FUNCTION_TRACE ("ev_update_gpe_enable_masks");
+
+
+	gpe_register_info = gpe_event_info->register_info;
+	if (!gpe_register_info) {
+		return_ACPI_STATUS (AE_NOT_EXIST);
+	}
+	register_bit = gpe_event_info->register_bit;
+
+	/* 1) Disable case.  Simply clear all enable bits */
+
+	if (type == ACPI_GPE_DISABLE) {
+		ACPI_CLEAR_BIT (gpe_register_info->enable_for_wake, register_bit);
+		ACPI_CLEAR_BIT (gpe_register_info->enable_for_run, register_bit);
+		return_ACPI_STATUS (AE_OK);
+	}
+
+	/* 2) Enable case.  Set/Clear the appropriate enable bits */
+
+	switch (gpe_event_info->flags & ACPI_GPE_TYPE_MASK) {
+	case ACPI_GPE_TYPE_WAKE:
+		ACPI_SET_BIT   (gpe_register_info->enable_for_wake, register_bit);
+		ACPI_CLEAR_BIT (gpe_register_info->enable_for_run, register_bit);
+		break;
+
+	case ACPI_GPE_TYPE_RUNTIME:
+		ACPI_CLEAR_BIT (gpe_register_info->enable_for_wake, register_bit);
+		ACPI_SET_BIT   (gpe_register_info->enable_for_run, register_bit);
+		break;
+
+	case ACPI_GPE_TYPE_WAKE_RUN:
+		ACPI_SET_BIT   (gpe_register_info->enable_for_wake, register_bit);
+		ACPI_SET_BIT   (gpe_register_info->enable_for_run, register_bit);
+		break;
+
+	default:
+		return_ACPI_STATUS (AE_BAD_PARAMETER);
+	}
+
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_enable_gpe
+ *
+ * PARAMETERS:  gpe_event_info          - GPE to enable
+ *              write_to_hardware       - Enable now, or just mark data structs
+ *                                        (WAKE GPEs should be deferred)
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Enable a GPE based on the GPE type
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ev_enable_gpe (
+	struct acpi_gpe_event_info      *gpe_event_info,
+	u8                              write_to_hardware)
+{
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE ("ev_enable_gpe");
+
+
+	/* Make sure HW enable masks are updated */
+
+	status = acpi_ev_update_gpe_enable_masks (gpe_event_info, ACPI_GPE_ENABLE);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	/* Mark wake-enabled or HW enable, or both */
+
+	switch (gpe_event_info->flags & ACPI_GPE_TYPE_MASK) {
+	case ACPI_GPE_TYPE_WAKE:
+
+		ACPI_SET_BIT (gpe_event_info->flags, ACPI_GPE_WAKE_ENABLED);
+		break;
+
+	case ACPI_GPE_TYPE_WAKE_RUN:
+
+		ACPI_SET_BIT (gpe_event_info->flags, ACPI_GPE_WAKE_ENABLED);
+
+		/*lint -fallthrough */
+
+	case ACPI_GPE_TYPE_RUNTIME:
+
+		ACPI_SET_BIT (gpe_event_info->flags, ACPI_GPE_RUN_ENABLED);
+
+		if (write_to_hardware) {
+			/* Clear the GPE (of stale events), then enable it */
+
+			status = acpi_hw_clear_gpe (gpe_event_info);
+			if (ACPI_FAILURE (status)) {
+				return_ACPI_STATUS (status);
+			}
+
+			/* Enable the requested runtime GPE */
+
+			status = acpi_hw_write_gpe_enable_reg (gpe_event_info);
+		}
+		break;
+
+	default:
+		return_ACPI_STATUS (AE_BAD_PARAMETER);
+	}
+
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_disable_gpe
+ *
+ * PARAMETERS:  gpe_event_info          - GPE to disable
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Disable a GPE based on the GPE type
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ev_disable_gpe (
+	struct acpi_gpe_event_info      *gpe_event_info)
+{
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE ("ev_disable_gpe");
+
+
+	if (!(gpe_event_info->flags & ACPI_GPE_ENABLE_MASK)) {
+		return_ACPI_STATUS (AE_OK);
+	}
+
+	/* Make sure HW enable masks are updated */
+
+	status = acpi_ev_update_gpe_enable_masks (gpe_event_info, ACPI_GPE_DISABLE);
+	if (ACPI_FAILURE (status)) {
+		return_ACPI_STATUS (status);
+	}
+
+	/* Mark wake-disabled or HW disable, or both */
+
+	switch (gpe_event_info->flags & ACPI_GPE_TYPE_MASK) {
+	case ACPI_GPE_TYPE_WAKE:
+		ACPI_CLEAR_BIT (gpe_event_info->flags, ACPI_GPE_WAKE_ENABLED);
+		break;
+
+	case ACPI_GPE_TYPE_WAKE_RUN:
+		ACPI_CLEAR_BIT (gpe_event_info->flags, ACPI_GPE_WAKE_ENABLED);
+
+		/*lint -fallthrough */
+
+	case ACPI_GPE_TYPE_RUNTIME:
+
+		/* Disable the requested runtime GPE */
+
+		ACPI_CLEAR_BIT (gpe_event_info->flags, ACPI_GPE_RUN_ENABLED);
+		status = acpi_hw_write_gpe_enable_reg (gpe_event_info);
+		break;
+
+	default:
+		return_ACPI_STATUS (AE_BAD_PARAMETER);
+	}
+
+	return_ACPI_STATUS (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_get_gpe_event_info
+ *
+ * PARAMETERS:  gpe_device          - Device node.  NULL for GPE0/GPE1
+ *              gpe_number          - Raw GPE number
+ *
+ * RETURN:      A GPE event_info struct. NULL if not a valid GPE
+ *
+ * DESCRIPTION: Returns the event_info struct associated with this GPE.
+ *              Validates the gpe_block and the gpe_number
+ *
+ *              Should be called only when the GPE lists are semaphore locked
+ *              and not subject to change.
+ *
+ ******************************************************************************/
+
+struct acpi_gpe_event_info *
+acpi_ev_get_gpe_event_info (
+	acpi_handle                     gpe_device,
+	u32                             gpe_number)
+{
+	union acpi_operand_object       *obj_desc;
+	struct acpi_gpe_block_info      *gpe_block;
+	acpi_native_uint                i;
+
+
+	ACPI_FUNCTION_ENTRY ();
+
+
+	/* A NULL gpe_block means use the FADT-defined GPE block(s) */
+
+	if (!gpe_device) {
+		/* Examine GPE Block 0 and 1 (These blocks are permanent) */
+
+		for (i = 0; i < ACPI_MAX_GPE_BLOCKS; i++) {
+			gpe_block = acpi_gbl_gpe_fadt_blocks[i];
+			if (gpe_block) {
+				if ((gpe_number >= gpe_block->block_base_number) &&
+					(gpe_number < gpe_block->block_base_number + (gpe_block->register_count * 8))) {
+					return (&gpe_block->event_info[gpe_number - gpe_block->block_base_number]);
+				}
+			}
+		}
+
+		/* The gpe_number was not in the range of either FADT GPE block */
+
+		return (NULL);
+	}
+
+	/* A Non-NULL gpe_device means this is a GPE Block Device */
+
+	obj_desc = acpi_ns_get_attached_object ((struct acpi_namespace_node *) gpe_device);
+	if (!obj_desc ||
+		!obj_desc->device.gpe_block) {
+		return (NULL);
+	}
+
+	gpe_block = obj_desc->device.gpe_block;
+
+	if ((gpe_number >= gpe_block->block_base_number) &&
+		(gpe_number < gpe_block->block_base_number + (gpe_block->register_count * 8))) {
+		return (&gpe_block->event_info[gpe_number - gpe_block->block_base_number]);
+	}
+
+	return (NULL);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_gpe_detect
+ *
+ * PARAMETERS:  gpe_xrupt_list      - Interrupt block for this interrupt.
+ *                                    Can have multiple GPE blocks attached.
+ *
+ * RETURN:      INTERRUPT_HANDLED or INTERRUPT_NOT_HANDLED
+ *
+ * DESCRIPTION: Detect if any GP events have occurred.  This function is
+ *              executed at interrupt level.
+ *
+ ******************************************************************************/
+
+u32
+acpi_ev_gpe_detect (
+	struct acpi_gpe_xrupt_info      *gpe_xrupt_list)
+{
+	u32                             int_status = ACPI_INTERRUPT_NOT_HANDLED;
+	u8                              enabled_status_byte;
+	struct acpi_gpe_register_info   *gpe_register_info;
+	u32                             status_reg;
+	u32                             enable_reg;
+	acpi_status                     status;
+	struct acpi_gpe_block_info      *gpe_block;
+	acpi_native_uint                i;
+	acpi_native_uint                j;
+
+
+	ACPI_FUNCTION_NAME ("ev_gpe_detect");
+
+	/* Check for the case where there are no GPEs */
+
+	if (!gpe_xrupt_list) {
+		return (int_status);
+	}
+
+	/* Examine all GPE blocks attached to this interrupt level */
+
+	acpi_os_acquire_lock (acpi_gbl_gpe_lock, ACPI_ISR);
+	gpe_block = gpe_xrupt_list->gpe_block_list_head;
+	while (gpe_block) {
+		/*
+		 * Read all of the 8-bit GPE status and enable registers
+		 * in this GPE block, saving all of them.
+		 * Find all currently active GP events.
+		 */
+		for (i = 0; i < gpe_block->register_count; i++) {
+			/* Get the next status/enable pair */
+
+			gpe_register_info = &gpe_block->register_info[i];
+
+			/* Read the Status Register */
+
+			status = acpi_hw_low_level_read (ACPI_GPE_REGISTER_WIDTH, &status_reg,
+					 &gpe_register_info->status_address);
+			if (ACPI_FAILURE (status)) {
+				goto unlock_and_exit;
+			}
+
+			/* Read the Enable Register */
+
+			status = acpi_hw_low_level_read (ACPI_GPE_REGISTER_WIDTH, &enable_reg,
+					 &gpe_register_info->enable_address);
+			if (ACPI_FAILURE (status)) {
+				goto unlock_and_exit;
+			}
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_INTERRUPTS,
+				"Read GPE Register at GPE%X: Status=%02X, Enable=%02X\n",
+				gpe_register_info->base_gpe_number, status_reg, enable_reg));
+
+			/* First check if there is anything active at all in this register */
+
+			enabled_status_byte = (u8) (status_reg & enable_reg);
+			if (!enabled_status_byte) {
+				/* No active GPEs in this register, move on */
+
+				continue;
+			}
+
+			/* Now look at the individual GPEs in this byte register */
+
+			for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) {
+				/* Examine one GPE bit */
+
+				if (enabled_status_byte & acpi_gbl_decode_to8bit[j]) {
+					/*
+					 * Found an active GPE. Dispatch the event to a handler
+					 * or method.
+					 */
+					int_status |= acpi_ev_gpe_dispatch (
+							  &gpe_block->event_info[(i * ACPI_GPE_REGISTER_WIDTH) + j],
+							  (u32) j + gpe_register_info->base_gpe_number);
+				}
+			}
+		}
+
+		gpe_block = gpe_block->next;
+	}
+
+unlock_and_exit:
+
+	acpi_os_release_lock (acpi_gbl_gpe_lock, ACPI_ISR);
+	return (int_status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_asynch_execute_gpe_method
+ *
+ * PARAMETERS:  Context (gpe_event_info) - Info for this GPE
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Perform the actual execution of a GPE control method.  This
+ *              function is called from an invocation of acpi_os_queue_for_execution
+ *              (and therefore does NOT execute at interrupt level) so that
+ *              the control method itself is not executed in the context of
+ *              an interrupt handler.
+ *
+ ******************************************************************************/
+
+static void ACPI_SYSTEM_XFACE
+acpi_ev_asynch_execute_gpe_method (
+	void                            *context)
+{
+	struct acpi_gpe_event_info      *gpe_event_info = (void *) context;
+	u32                             gpe_number = 0;
+	acpi_status                     status;
+	struct acpi_gpe_event_info      local_gpe_event_info;
+	struct acpi_parameter_info      info;
+
+
+	ACPI_FUNCTION_TRACE ("ev_asynch_execute_gpe_method");
+
+
+	status = acpi_ut_acquire_mutex (ACPI_MTX_EVENTS);
+	if (ACPI_FAILURE (status)) {
+		return_VOID;
+	}
+
+	/* Must revalidate the gpe_number/gpe_block */
+
+	if (!acpi_ev_valid_gpe_event (gpe_event_info)) {
+		status = acpi_ut_release_mutex (ACPI_MTX_EVENTS);
+		return_VOID;
+	}
+
+	/* Set the GPE flags for return to enabled state */
+
+	(void) acpi_ev_enable_gpe (gpe_event_info, FALSE);
+
+	/*
+	 * Take a snapshot of the GPE info for this level - we copy the
+	 * info to prevent a race condition with remove_handler/remove_block.
+	 */
+	ACPI_MEMCPY (&local_gpe_event_info, gpe_event_info, sizeof (struct acpi_gpe_event_info));
+
+	status = acpi_ut_release_mutex (ACPI_MTX_EVENTS);
+	if (ACPI_FAILURE (status)) {
+		return_VOID;
+	}
+
+	/*
+	 * Must check for control method type dispatch one more
+	 * time to avoid race with ev_gpe_install_handler
+	 */
+	if ((local_gpe_event_info.flags & ACPI_GPE_DISPATCH_MASK) == ACPI_GPE_DISPATCH_METHOD) {
+		/*
+		 * Invoke the GPE Method (_Lxx, _Exx) i.e., evaluate the _Lxx/_Exx
+		 * control method that corresponds to this GPE
+		 */
+		info.node = local_gpe_event_info.dispatch.method_node;
+		info.parameters = ACPI_CAST_PTR (union acpi_operand_object *, gpe_event_info);
+		info.parameter_type = ACPI_PARAM_GPE;
+
+		status = acpi_ns_evaluate_by_handle (&info);
+		if (ACPI_FAILURE (status)) {
+			ACPI_REPORT_ERROR ((
+				"%s while evaluating method [%4.4s] for GPE[%2X]\n",
+				acpi_format_exception (status),
+				acpi_ut_get_node_name (local_gpe_event_info.dispatch.method_node),
+				gpe_number));
+		}
+	}
+
+	if ((local_gpe_event_info.flags & ACPI_GPE_XRUPT_TYPE_MASK) == ACPI_GPE_LEVEL_TRIGGERED) {
+		/*
+		 * GPE is level-triggered, we clear the GPE status bit after
+		 * handling the event.
+		 */
+		status = acpi_hw_clear_gpe (&local_gpe_event_info);
+		if (ACPI_FAILURE (status)) {
+			return_VOID;
+		}
+	}
+
+	/* Enable this GPE */
+
+	(void) acpi_hw_write_gpe_enable_reg (&local_gpe_event_info);
+	return_VOID;
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_gpe_dispatch
+ *
+ * PARAMETERS:  gpe_event_info  - info for this GPE
+ *              gpe_number      - Number relative to the parent GPE block
+ *
+ * RETURN:      INTERRUPT_HANDLED or INTERRUPT_NOT_HANDLED
+ *
+ * DESCRIPTION: Dispatch a General Purpose Event to either a function (e.g. EC)
+ *              or method (e.g. _Lxx/_Exx) handler.
+ *
+ *              This function executes at interrupt level.
+ *
+ ******************************************************************************/
+
+u32
+acpi_ev_gpe_dispatch (
+	struct acpi_gpe_event_info      *gpe_event_info,
+	u32                             gpe_number)
+{
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE ("ev_gpe_dispatch");
+
+
+	/*
+	 * If edge-triggered, clear the GPE status bit now.  Note that
+	 * level-triggered events are cleared after the GPE is serviced.
+	 */
+	if ((gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK) == ACPI_GPE_EDGE_TRIGGERED) {
+		status = acpi_hw_clear_gpe (gpe_event_info);
+		if (ACPI_FAILURE (status)) {
+			ACPI_REPORT_ERROR (("acpi_ev_gpe_dispatch: %s, Unable to clear GPE[%2X]\n",
+				acpi_format_exception (status), gpe_number));
+			return_VALUE (ACPI_INTERRUPT_NOT_HANDLED);
+		}
+	}
+
+	/* Save current system state */
+
+	if (acpi_gbl_system_awake_and_running) {
+		ACPI_SET_BIT (gpe_event_info->flags, ACPI_GPE_SYSTEM_RUNNING);
+	}
+	else {
+		ACPI_CLEAR_BIT (gpe_event_info->flags, ACPI_GPE_SYSTEM_RUNNING);
+	}
+
+	/*
+	 * Dispatch the GPE to either an installed handler, or the control
+	 * method associated with this GPE (_Lxx or _Exx).
+	 * If a handler exists, we invoke it and do not attempt to run the method.
+	 * If there is neither a handler nor a method, we disable the level to
+	 * prevent further events from coming in here.
+	 */
+	switch (gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) {
+	case ACPI_GPE_DISPATCH_HANDLER:
+
+		/*
+		 * Invoke the installed handler (at interrupt level)
+		 * Ignore return status for now.  TBD: leave GPE disabled on error?
+		 */
+		(void) gpe_event_info->dispatch.handler->address (
+				  gpe_event_info->dispatch.handler->context);
+
+		/* It is now safe to clear level-triggered events. */
+
+		if ((gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK) == ACPI_GPE_LEVEL_TRIGGERED) {
+			status = acpi_hw_clear_gpe (gpe_event_info);
+			if (ACPI_FAILURE (status)) {
+				ACPI_REPORT_ERROR ((
+					"acpi_ev_gpe_dispatch: %s, Unable to clear GPE[%2X]\n",
+					acpi_format_exception (status), gpe_number));
+				return_VALUE (ACPI_INTERRUPT_NOT_HANDLED);
+			}
+		}
+		break;
+
+	case ACPI_GPE_DISPATCH_METHOD:
+
+		/*
+		 * Disable GPE, so it doesn't keep firing before the method has a
+		 * chance to run.
+		 */
+		status = acpi_ev_disable_gpe (gpe_event_info);
+		if (ACPI_FAILURE (status)) {
+			ACPI_REPORT_ERROR ((
+				"acpi_ev_gpe_dispatch: %s, Unable to disable GPE[%2X]\n",
+				acpi_format_exception (status), gpe_number));
+			return_VALUE (ACPI_INTERRUPT_NOT_HANDLED);
+		}
+
+		/*
+		 * Execute the method associated with the GPE
+		 * NOTE: Level-triggered GPEs are cleared after the method completes.
+		 */
+		status = acpi_os_queue_for_execution (OSD_PRIORITY_GPE,
+				 acpi_ev_asynch_execute_gpe_method, gpe_event_info);
+		if (ACPI_FAILURE (status)) {
+			ACPI_REPORT_ERROR ((
+				"acpi_ev_gpe_dispatch: %s, Unable to queue handler for GPE[%2X] - event disabled\n",
+				acpi_format_exception (status), gpe_number));
+		}
+		break;
+
+	default:
+
+		/* No handler or method to run! */
+
+		ACPI_REPORT_ERROR ((
+			"acpi_ev_gpe_dispatch: No handler or method for GPE[%2X], disabling event\n",
+			gpe_number));
+
+		/*
+		 * Disable the GPE.  The GPE will remain disabled until the ACPI
+		 * Core Subsystem is restarted, or a handler is installed.
+		 */
+		status = acpi_ev_disable_gpe (gpe_event_info);
+		if (ACPI_FAILURE (status)) {
+			ACPI_REPORT_ERROR ((
+				"acpi_ev_gpe_dispatch: %s, Unable to disable GPE[%2X]\n",
+				acpi_format_exception (status), gpe_number));
+			return_VALUE (ACPI_INTERRUPT_NOT_HANDLED);
+		}
+		break;
+	}
+
+	return_VALUE (ACPI_INTERRUPT_HANDLED);
+}
+
+
+#ifdef ACPI_GPE_NOTIFY_CHECK
+
+/*******************************************************************************
+ * TBD: NOT USED, PROTOTYPE ONLY AND WILL PROBABLY BE REMOVED
+ *
+ * FUNCTION:    acpi_ev_check_for_wake_only_gpe
+ *
+ * PARAMETERS:  gpe_event_info  - info for this GPE
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Determine if a a GPE is "wake-only".
+ *
+ *              Called from Notify() code in interpreter when a "device_wake"
+ *              Notify comes in.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ev_check_for_wake_only_gpe (
+	struct acpi_gpe_event_info      *gpe_event_info)
+{
+	acpi_status                     status;
+
+
+	ACPI_FUNCTION_TRACE ("ev_check_for_wake_only_gpe");
+
+
+	if ((gpe_event_info) &&  /* Only >0 for _Lxx/_Exx */
+	   ((gpe_event_info->flags & ACPI_GPE_SYSTEM_MASK) == ACPI_GPE_SYSTEM_RUNNING)) /* System state at GPE time */ {
+		/* This must be a wake-only GPE, disable it */
+
+		status = acpi_ev_disable_gpe (gpe_event_info);
+
+		/* Set GPE to wake-only.  Do not change wake disabled/enabled status */
+
+		acpi_ev_set_gpe_type (gpe_event_info, ACPI_GPE_TYPE_WAKE);
+
+		ACPI_REPORT_INFO (("GPE %p was updated from wake/run to wake-only\n",
+				gpe_event_info));
+
+		/* This was a wake-only GPE */
+
+		return_ACPI_STATUS (AE_WAKE_ONLY_GPE);
+	}
+
+	return_ACPI_STATUS (AE_OK);
+}
+#endif
+
+