diff options
| author | Hans de Goede <hdegoede@redhat.com> | 2017-12-11 17:52:16 +0100 |
|---|---|---|
| committer | Tejun Heo <tj@kernel.org> | 2017-12-11 08:53:33 -0800 |
| commit | ebb82e3c79d2a956366d0848304a53648bd6350b (patch) | |
| tree | 3894ee6113c2d3beeebb1b71b61284c988935f18 /drivers/ata/Kconfig | |
| parent | 998008b779e424bd7513c434d0ab9c1268459009 (diff) | |
| download | linux-ebb82e3c79d2a956366d0848304a53648bd6350b.tar.gz linux-ebb82e3c79d2a956366d0848304a53648bd6350b.tar.bz2 linux-ebb82e3c79d2a956366d0848304a53648bd6350b.zip | |
ahci: Allow setting a default LPM policy for mobile chipsets
On many laptops setting a different LPM policy then unknown /
max_performance can lead to power-savings of 1.0 - 1.5 Watts (when idle).
Modern ultrabooks idle around 6W (at 50% screen brightness), 1.0 - 1.5W
is a significant chunk of this.
There are some performance / latency costs to enabling LPM by default,
so it is desirable to make it possible to set a different LPM policy
for mobile / laptop variants of chipsets / "South Bridges" vs their
desktop / server counterparts. Also enabling LPM by default is not
entirely without risk of regressions. At least min_power is known to
cause issues with some disks, including some reports of data corruption.
This commits adds a new ahci.mobile_lpm_policy kernel cmdline option,
which defaults to a new SATA_MOBILE_LPM_POLICY Kconfig option so that
Linux distributions can choose to set a LPM policy for mobile chipsets
by default.
The reason to have both a kernel cmdline option and a Kconfig default
value for it, is to allow easy overriding of the default to allow
trouble-shooting without needing to rebuild the kernel.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Diffstat (limited to 'drivers/ata/Kconfig')
| -rw-r--r-- | drivers/ata/Kconfig | 19 |
1 files changed, 19 insertions, 0 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index cb5339166563..b3fad5663aeb 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -92,6 +92,25 @@ config SATA_AHCI If unsure, say N. +config SATA_MOBILE_LPM_POLICY + int "Default SATA Link Power Management policy for mobile chipsets" + range 0 4 + default 0 + depends on SATA_AHCI + help + Select the Default SATA Link Power Management (LPM) policy to use + for mobile / laptop variants of chipsets / "South Bridges". + + The value set has the following meanings: + 0 => Keep firmware settings + 1 => Maximum performance + 2 => Medium power + 3 => Medium power with Device Initiated PM enabled + 4 => Minimum power + + Note "Minimum power" is known to cause issues, including disk + corruption, with some disks and should not be used. + config SATA_AHCI_PLATFORM tristate "Platform AHCI SATA support" help |