more ACSI removal

This patch removes some code that became dead code after the ATARI_ACSI
removal.

It also indirectly fixes the following bug introduced by
commit c2bcf3b8978c291e1b7f6499475c8403a259d4d6:

 config ATARI_SLM
        tristate "Atari SLM laser printer support"
-       depends on ATARI && ATARI_ACSI!=n
+       depends on ATARI

Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

3 files changed, 0 insertions, 1044 deletions

diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 6e23af1ecbdb..95d6838c4ff3 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -59,17 +59,6 @@ config AMIGA_Z2RAM
 	  To compile this driver as a module, choose M here: the
 	  module will be called z2ram.
 
-config ATARI_SLM
-	tristate "Atari SLM laser printer support"
-	depends on ATARI
-	help
-	  If you have an Atari SLM laser printer, say Y to include support for
-	  it in the kernel. Otherwise, say N. This driver is also available as
-	  a module ( = code which can be inserted in and removed from the
-	  running kernel whenever you want). The module will be called
-	  acsi_slm. Be warned: the driver needs much ST-RAM and can cause
-	  problems due to that fact!
-
 config BLK_DEV_XD
 	tristate "XT hard disk support"
 	depends on ISA && ISA_DMA_API
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index e5f98acc5d52..bba3119b28c4 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -9,7 +9,6 @@ obj-$(CONFIG_MAC_FLOPPY)	+= swim3.o
 obj-$(CONFIG_BLK_DEV_FD)	+= floppy.o
 obj-$(CONFIG_AMIGA_FLOPPY)	+= amiflop.o
 obj-$(CONFIG_ATARI_FLOPPY)	+= ataflop.o
-obj-$(CONFIG_ATARI_SLM)		+= acsi_slm.o
 obj-$(CONFIG_AMIGA_Z2RAM)	+= z2ram.o
 obj-$(CONFIG_BLK_DEV_RAM)	+= rd.o
 obj-$(CONFIG_BLK_DEV_LOOP)	+= loop.o
diff --git a/drivers/block/acsi_slm.c b/drivers/block/acsi_slm.c
deleted file mode 100644
index 1d9d9b4f48cc..000000000000
--- a/drivers/block/acsi_slm.c
+++ /dev/null
@@ -1,1032 +0,0 @@
-/*
- * acsi_slm.c -- Device driver for the Atari SLM laser printer
- *
- * Copyright 1995 Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive for
- * more details.
- * 
- */
-
-/*
-
-Notes:
-
-The major number for SLM printers is 28 (like ACSI), but as a character
-device, not block device. The minor number is the number of the printer (if
-you have more than one SLM; currently max. 2 (#define-constant) SLMs are
-supported). The device can be opened for reading and writing. If reading it,
-you get some status infos (MODE SENSE data). Writing mode is used for the data
-to be printed. Some ioctls allow to get the printer status and to tune printer
-modes and some internal variables.
-
-A special problem of the SLM driver is the timing and thus the buffering of
-the print data. The problem is that all the data for one page must be present
-in memory when printing starts, else --when swapping occurs-- the timing could
-not be guaranteed. There are several ways to assure this:
-
- 1) Reserve a buffer of 1196k (maximum page size) statically by
-    atari_stram_alloc(). The data are collected there until they're complete,
-	and then printing starts. Since the buffer is reserved, no further
-	considerations about memory and swapping are needed. So this is the
-	simplest method, but it needs a lot of memory for just the SLM.
-
-    An striking advantage of this method is (supposed the SLM_CONT_CNT_REPROG
-	method works, see there), that there are no timing problems with the DMA
-	anymore.
-	
- 2) The other method would be to reserve the buffer dynamically each time
-    printing is required. I could think of looking at mem_map where the
-	largest unallocted ST-RAM area is, taking the area, and then extending it
-	by swapping out the neighbored pages, until the needed size is reached.
-	This requires some mm hacking, but seems possible. The only obstacle could
-	be pages that cannot be swapped out (reserved pages)...
-
- 3) Another possibility would be to leave the real data in user space and to
-    work with two dribble buffers of about 32k in the driver: While the one
-	buffer is DMAed to the SLM, the other can be filled with new data. But
-	to keep the timing, that requires that the user data remain in memory and
-	are not swapped out. Requires mm hacking, too, but maybe not so bad as
-	method 2).
-
-*/
-
-#include <linux/module.h>
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/major.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/uaccess.h>
-#include <asm/atarihw.h>
-#include <asm/atariints.h>
-#include <asm/atari_acsi.h>
-#include <asm/atari_stdma.h>
-#include <asm/atari_stram.h>
-#include <asm/atari_SLM.h>
-
-
-#undef	DEBUG
-
-/* Define this if the page data are continuous in physical memory. That
- * requires less reprogramming of the ST-DMA */
-#define	SLM_CONTINUOUS_DMA
-
-/* Use continuous reprogramming of the ST-DMA counter register. This is
- * --strictly speaking-- not allowed, Atari recommends not to look at the
- * counter register while a DMA is going on. But I don't know if that applies
- * only for reading the register, or also writing to it. Writing only works
- * fine for me... The advantage is that the timing becomes absolutely
- * uncritical: Just update each, say 200ms, the counter reg to its maximum,
- * and the DMA will work until the status byte interrupt occurs.
- */
-#define	SLM_CONT_CNT_REPROG
-
-#define CMDSET_TARG_LUN(cmd,targ,lun)			\
-    do {										\
-		cmd[0] = (cmd[0] & ~0xe0) | (targ)<<5;	\
-		cmd[1] = (cmd[1] & ~0xe0) | (lun)<<5;	\
-	} while(0)
-
-#define	START_TIMER(to)	mod_timer(&slm_timer, jiffies + (to))
-#define	STOP_TIMER()	del_timer(&slm_timer)
-
-
-static char slmreqsense_cmd[6] = { 0x03, 0, 0, 0, 0, 0 };
-static char slmprint_cmd[6]    = { 0x0a, 0, 0, 0, 0, 0 };
-static char slminquiry_cmd[6]  = { 0x12, 0, 0, 0, 0, 0x80 };
-static char slmmsense_cmd[6]   = { 0x1a, 0, 0, 0, 255, 0 };
-#if 0
-static char slmmselect_cmd[6]  = { 0x15, 0, 0, 0, 0, 0 };
-#endif
-
-
-#define	MAX_SLM		2
-
-static struct slm {
-	unsigned	target;			/* target number */
-	unsigned	lun;			/* LUN in target controller */
-	atomic_t	wr_ok; 			/* set to 0 if output part busy */
-	atomic_t	rd_ok;			/* set to 0 if status part busy */
-} slm_info[MAX_SLM];
-
-int N_SLM_Printers = 0;
-
-/* printer buffer */
-static unsigned char	*SLMBuffer;	/* start of buffer */
-static unsigned char	*BufferP;	/* current position in buffer */
-static int				BufferSize;	/* length of buffer for page size */
-
-typedef enum { IDLE, FILLING, PRINTING } SLMSTATE;
-static SLMSTATE			SLMState;
-static int				SLMBufOwner;	/* SLM# currently using the buffer */
-
-/* DMA variables */
-#ifndef SLM_CONT_CNT_REPROG
-static unsigned long	SLMCurAddr;		/* current base addr of DMA chunk */
-static unsigned long	SLMEndAddr;		/* expected end addr */
-static unsigned long	SLMSliceSize;	/* size of one DMA chunk */
-#endif
-static int				SLMError;
-
-/* wait queues */
-static DECLARE_WAIT_QUEUE_HEAD(slm_wait);	/* waiting for buffer */
-static DECLARE_WAIT_QUEUE_HEAD(print_wait);	/* waiting for printing finished */
-
-/* status codes */
-#define	SLMSTAT_OK		0x00
-#define	SLMSTAT_ORNERY	0x02
-#define	SLMSTAT_TONER	0x03
-#define	SLMSTAT_WARMUP	0x04
-#define	SLMSTAT_PAPER	0x05
-#define	SLMSTAT_DRUM	0x06
-#define	SLMSTAT_INJAM	0x07
-#define	SLMSTAT_THRJAM	0x08
-#define	SLMSTAT_OUTJAM	0x09
-#define	SLMSTAT_COVER	0x0a
-#define	SLMSTAT_FUSER	0x0b
-#define	SLMSTAT_IMAGER	0x0c
-#define	SLMSTAT_MOTOR	0x0d
-#define	SLMSTAT_VIDEO	0x0e
-#define	SLMSTAT_SYSTO	0x10
-#define	SLMSTAT_OPCODE	0x12
-#define	SLMSTAT_DEVNUM	0x15
-#define	SLMSTAT_PARAM	0x1a
-#define	SLMSTAT_ACSITO	0x1b	/* driver defined */
-#define	SLMSTAT_NOTALL	0x1c	/* driver defined */
-
-static char *SLMErrors[] = {
-	/* 0x00 */	"OK and ready",
-	/* 0x01 */	NULL,
-	/* 0x02 */	"ornery printer",
-	/* 0x03 */	"toner empty",
-	/* 0x04 */	"warming up",
-	/* 0x05 */	"paper empty",
-	/* 0x06 */	"drum empty",
-	/* 0x07 */	"input jam",
-	/* 0x08 */	"through jam",
-	/* 0x09 */	"output jam",
-	/* 0x0a */	"cover open",
-	/* 0x0b */	"fuser malfunction",
-	/* 0x0c */	"imager malfunction",
-	/* 0x0d */	"motor malfunction",
-	/* 0x0e */	"video malfunction",
-	/* 0x0f */	NULL,
-	/* 0x10 */	"printer system timeout",
-	/* 0x11 */	NULL,
-	/* 0x12 */	"invalid operation code",
-	/* 0x13 */	NULL,
-	/* 0x14 */	NULL,
-	/* 0x15 */	"invalid device number",
-	/* 0x16 */	NULL,
-	/* 0x17 */	NULL,
-	/* 0x18 */	NULL,
-	/* 0x19 */	NULL,
-	/* 0x1a */	"invalid parameter list",
-	/* 0x1b */	"ACSI timeout",
-	/* 0x1c */	"not all printed"
-};
-
-#define	N_ERRORS	(sizeof(SLMErrors)/sizeof(*SLMErrors))
-
-/* real (driver caused) error? */
-#define	IS_REAL_ERROR(x)	(x > 0x10)
-
-
-static struct {
-	char	*name;
-	int 	w, h;
-} StdPageSize[] = {
-	{ "Letter", 2400, 3180 },
-	{ "Legal",  2400, 4080 },
-	{ "A4",     2336, 3386 },
-	{ "B5",     2016, 2914 }
-};
-
-#define	N_STD_SIZES		(sizeof(StdPageSize)/sizeof(*StdPageSize))
-
-#define	SLM_BUFFER_SIZE	(2336*3386/8)	/* A4 for now */
-#define	SLM_DMA_AMOUNT	255				/* #sectors to program the DMA for */
-
-#ifdef	SLM_CONTINUOUS_DMA
-# define	SLM_DMA_INT_OFFSET	0		/* DMA goes until seccnt 0, no offs */
-# define	SLM_DMA_END_OFFSET	32		/* 32 Byte ST-DMA FIFO */
-# define	SLM_SLICE_SIZE(w) 	(255*512)
-#else
-# define	SLM_DMA_INT_OFFSET	32		/* 32 Byte ST-DMA FIFO */
-# define	SLM_DMA_END_OFFSET	32		/* 32 Byte ST-DMA FIFO */
-# define	SLM_SLICE_SIZE(w)	((254*512)/(w/8)*(w/8))
-#endif
-
-/* calculate the number of jiffies to wait for 'n' bytes */
-#ifdef SLM_CONT_CNT_REPROG
-#define	DMA_TIME_FOR(n)		50
-#define	DMA_STARTUP_TIME	0
-#else
-#define	DMA_TIME_FOR(n)		(n/1400-1)
-#define	DMA_STARTUP_TIME	650
-#endif
-
-/***************************** Prototypes *****************************/
-
-static char *slm_errstr( int stat );
-static int slm_getstats( char *buffer, int device );
-static ssize_t slm_read( struct file* file, char *buf, size_t count, loff_t
-                         *ppos );
-static void start_print( int device );
-static irqreturn_t slm_interrupt(int irc, void *data);
-static void slm_test_ready( unsigned long dummy );
-static void set_dma_addr( unsigned long paddr );
-static unsigned long get_dma_addr( void );
-static ssize_t slm_write( struct file *file, const char *buf, size_t count,
-                          loff_t *ppos );
-static int slm_ioctl( struct inode *inode, struct file *file, unsigned int
-                      cmd, unsigned long arg );
-static int slm_open( struct inode *inode, struct file *file );
-static int slm_release( struct inode *inode, struct file *file );
-static int slm_req_sense( int device );
-static int slm_mode_sense( int device, char *buffer, int abs_flag );
-#if 0
-static int slm_mode_select( int device, char *buffer, int len, int
-                            default_flag );
-#endif
-static int slm_get_pagesize( int device, int *w, int *h );
-
-/************************* End of Prototypes **************************/
-
-
-static DEFINE_TIMER(slm_timer, slm_test_ready, 0, 0);
-
-static const struct file_operations slm_fops = {
-	.owner =	THIS_MODULE,
-	.read =		slm_read,
-	.write =	slm_write,
-	.ioctl =	slm_ioctl,
-	.open =		slm_open,
-	.release =	slm_release,
-};
-
-
-/* ---------------------------------------------------------------------- */
-/*							   Status Functions							  */
-
-
-static char *slm_errstr( int stat )
-
-{	char *p;
-	static char	str[22];
-
-	stat &= 0x1f;
-	if (stat >= 0 && stat < N_ERRORS && (p = SLMErrors[stat]))
-		return( p );
-	sprintf( str, "unknown status 0x%02x", stat );
-	return( str );
-}
-
-
-static int slm_getstats( char *buffer, int device )
-
-{	int 			len = 0, stat, i, w, h;
-	unsigned char	buf[256];
-	
-	stat = slm_mode_sense( device, buf, 0 );
-	if (IS_REAL_ERROR(stat))
-		return( -EIO );
-	
-#define SHORTDATA(i)		((buf[i] << 8) | buf[i+1])
-#define	BOOLDATA(i,mask)	((buf[i] & mask) ? "on" : "off")
-
-	w = SHORTDATA( 3 );
-	h = SHORTDATA( 1 );
-		
-	len += sprintf( buffer+len, "Status\t\t%s\n",
-					slm_errstr( stat ) );
-	len += sprintf( buffer+len, "Page Size\t%dx%d",
-					w, h );
-
-	for( i = 0; i < N_STD_SIZES; ++i ) {
-		if (w == StdPageSize[i].w && h == StdPageSize[i].h)
-			break;
-	}
-	if (i < N_STD_SIZES)
-		len += sprintf( buffer+len, " (%s)", StdPageSize[i].name );
-	buffer[len++] = '\n';
-
-	len += sprintf( buffer+len, "Top/Left Margin\t%d/%d\n",
-					SHORTDATA( 5 ), SHORTDATA( 7 ) );
-	len += sprintf( buffer+len, "Manual Feed\t%s\n",
-					BOOLDATA( 9, 0x01 ) );
-	len += sprintf( buffer+len, "Input Select\t%d\n",
-					(buf[9] >> 1) & 7 );
-	len += sprintf( buffer+len, "Auto Select\t%s\n",
-					BOOLDATA( 9, 0x10 ) );
-	len += sprintf( buffer+len, "Prefeed Paper\t%s\n",
-					BOOLDATA( 9, 0x20 ) );
-	len += sprintf( buffer+len, "Thick Pixels\t%s\n",
-					BOOLDATA( 9, 0x40 ) );
-	len += sprintf( buffer+len, "H/V Resol.\t%d/%d dpi\n",
-					SHORTDATA( 12 ), SHORTDATA( 10 ) );
-	len += sprintf( buffer+len, "System Timeout\t%d\n",
-					buf[14] );
-	len += sprintf( buffer+len, "Scan Time\t%d\n",
-					SHORTDATA( 15 ) );
-	len += sprintf( buffer+len, "Page Count\t%d\n",
-					SHORTDATA( 17 ) );
-	len += sprintf( buffer+len, "In/Out Cap.\t%d/%d\n",
-					SHORTDATA( 19 ), SHORTDATA( 21 ) );
-	len += sprintf( buffer+len, "Stagger Output\t%s\n",
-					BOOLDATA( 23, 0x01 ) );
-	len += sprintf( buffer+len, "Output Select\t%d\n",
-					(buf[23] >> 1) & 7 );
-	len += sprintf( buffer+len, "Duplex Print\t%s\n",
-					BOOLDATA( 23, 0x10 ) );
-	len += sprintf( buffer+len, "Color Sep.\t%s\n",
-					BOOLDATA( 23, 0x20 ) );
-
-	return( len );
-}
-
-
-static ssize_t slm_read( struct file *file, char *buf, size_t count,
-						 loff_t *ppos )
-
-{
-	struct inode *node = file->f_path.dentry->d_inode;
-	unsigned long page;
-	int length;
-	int end;
-
-	if (!(page = __get_free_page( GFP_KERNEL )))
-		return( -ENOMEM );
-	
-	length = slm_getstats( (char *)page, iminor(node) );
-	if (length < 0) {
-		count = length;
-		goto out;
-	}
-	if (file->f_pos >= length) {
-		count = 0;
-		goto out;
-	}
-	if (count + file->f_pos > length)
-		count = length - file->f_pos;
-	end = count + file->f_pos;
-	if (copy_to_user(buf, (char *)page + file->f_pos, count)) {
-		count = -EFAULT;
-		goto out;
-	}
-	file->f_pos = end;
-out:	free_page( page );
-	return( count );
-}
-
-
-/* ---------------------------------------------------------------------- */
-/*								   Printing								  */
-
-
-static void start_print( int device )
-
-{	struct slm *sip = &slm_info[device];
-	unsigned char	*cmd;
-	unsigned long	paddr;
-	int				i;
-	
-	stdma_lock( slm_interrupt, NULL );
-
-	CMDSET_TARG_LUN( slmprint_cmd, sip->target, sip->lun );
-	cmd = slmprint_cmd;
-	paddr = virt_to_phys( SLMBuffer );
-	dma_cache_maintenance( paddr, virt_to_phys(BufferP)-paddr, 1 );
-	DISABLE_IRQ();
-
-	/* Low on A1 */
-	dma_wd.dma_mode_status = 0x88;
-	MFPDELAY();
-
-	/* send the command bytes except the last */
-	for( i = 0; i < 5; ++i ) {
-		DMA_LONG_WRITE( *cmd++, 0x8a );
-		udelay(20);
-		if (!acsi_wait_for_IRQ( HZ/2 )) {
-			SLMError = 1;
-			return; /* timeout */
-		}
-	}
-	/* last command byte */
-	DMA_LONG_WRITE( *cmd++, 0x82 );
-	MFPDELAY();
-	/* set DMA address */
-	set_dma_addr( paddr );
-	/* program DMA for write and select sector counter reg */
-	dma_wd.dma_mode_status = 0x192;
-	MFPDELAY();
-	/* program for 255*512 bytes and start DMA */
-	DMA_LONG_WRITE( SLM_DMA_AMOUNT, 0x112 );
-
-#ifndef SLM_CONT_CNT_REPROG
-	SLMCurAddr = paddr;
-	SLMEndAddr = paddr + SLMSliceSize + SLM_DMA_INT_OFFSET;
-#endif
-	START_TIMER( DMA_STARTUP_TIME + DMA_TIME_FOR( SLMSliceSize ));
-#if !defined(SLM_CONT_CNT_REPROG) && defined(DEBUG)
-	printk( "SLM: CurAddr=%#lx EndAddr=%#lx timer=%ld\n",
-			SLMCurAddr, SLMEndAddr, DMA_TIME_FOR( SLMSliceSize ) );
-#endif
-	
-	ENABLE_IRQ();
-}
-
-
-/* Only called when an error happened or at the end of a page */
-
-static irqreturn_t slm_interrupt(int irc, void *data)
-
-{	unsigned long	addr;
-	int				stat;
-	
-	STOP_TIMER();
-	addr = get_dma_addr();
-	stat = acsi_getstatus();
-	SLMError = (stat < 0)             ? SLMSTAT_ACSITO :
-		       (addr < virt_to_phys(BufferP)) ? SLMSTAT_NOTALL :
-									    stat;
-
-	dma_wd.dma_mode_status = 0x80;
-	MFPDELAY();
-#ifdef DEBUG
-	printk( "SLM: interrupt, addr=%#lx, error=%d\n", addr, SLMError );
-#endif
-
-	wake_up( &print_wait );
-	stdma_release();
-	ENABLE_IRQ();
-	return IRQ_HANDLED;
-}
-
-
-static void slm_test_ready( unsigned long dummy )
-
-{
-#ifdef SLM_CONT_CNT_REPROG
-	/* program for 255*512 bytes again */
-	dma_wd.fdc_acces_seccount = SLM_DMA_AMOUNT;
-	START_TIMER( DMA_TIME_FOR(0) );
-#ifdef DEBUG
-	printk( "SLM: reprogramming timer for %d jiffies, addr=%#lx\n",
-			DMA_TIME_FOR(0), get_dma_addr() );
-#endif
-	
-#else /* !SLM_CONT_CNT_REPROG */
-
-	unsigned long	flags, addr;
-	int				d, ti;
-#ifdef DEBUG
-	struct timeval start_tm, end_tm;
-	int			   did_wait = 0;
-#endif
-
-	local_irq_save(flags);
-
-	addr = get_dma_addr();
-	if ((d = SLMEndAddr - addr) > 0) {
-		local_irq_restore(flags);
-		
-		/* slice not yet finished, decide whether to start another timer or to
-		 * busy-wait */
-		ti = DMA_TIME_FOR( d );
-		if (ti > 0) {
-#ifdef DEBUG
-			printk( "SLM: reprogramming timer for %d jiffies, rest %d bytes\n",
-					ti, d );
-#endif
-			START_TIMER( ti );
-			return;
-		}
-		/* wait for desired end address to be reached */
-#ifdef DEBUG
-		do_gettimeofday( &start_tm );
-		did_wait = 1;
-#endif
-		local_irq_disable();
-		while( get_dma_addr() < SLMEndAddr )
-			barrier();
-	}
-
-	/* slice finished, start next one */
-	SLMCurAddr += SLMSliceSize;
-
-#ifdef SLM_CONTINUOUS_DMA
-	/* program for 255*512 bytes again */
-	dma_wd.fdc_acces_seccount = SLM_DMA_AMOUNT;
-#else
-	/* set DMA address;
-	 * add 2 bytes for the ones in the SLM controller FIFO! */
-	set_dma_addr( SLMCurAddr + 2 );
-	/* toggle DMA to write and select sector counter reg */
-	dma_wd.dma_mode_status = 0x92;
-	MFPDELAY();
-	dma_wd.dma_mode_status = 0x192;
-	MFPDELAY();
-	/* program for 255*512 bytes and start DMA */
-	DMA_LONG_WRITE( SLM_DMA_AMOUNT, 0x112 );
-#endif
-	
-	local_irq_restore(flags);
-
-#ifdef DEBUG
-	if (did_wait) {
-		int ms;
-		do_gettimeofday( &end_tm );
-		ms = (end_tm.tv_sec*1000000+end_tm.tv_usec) -
-			 (start_tm.tv_sec*1000000+start_tm.tv_usec); 
-		printk( "SLM: did %ld.%ld ms busy waiting for %d bytes\n",
-				ms/1000, ms%1000, d );
-	}
-	else
-		printk( "SLM: didn't wait (!)\n" );
-#endif
-
-	if ((unsigned char *)PTOV( SLMCurAddr + SLMSliceSize ) >= BufferP) {
-		/* will be last slice, no timer necessary */
-#ifdef DEBUG
-		printk( "SLM: CurAddr=%#lx EndAddr=%#lx last slice -> no timer\n",
-				SLMCurAddr, SLMEndAddr );
-#endif
-	}
-	else {
-		/* not last slice */
-		SLMEndAddr = SLMCurAddr + SLMSliceSize + SLM_DMA_INT_OFFSET;
-		START_TIMER( DMA_TIME_FOR( SLMSliceSize ));
-#ifdef DEBUG
-		printk( "SLM: CurAddr=%#lx EndAddr=%#lx timer=%ld\n",
-				SLMCurAddr, SLMEndAddr, DMA_TIME_FOR( SLMSliceSize ) );
-#endif
-	}
-#endif /* SLM_CONT_CNT_REPROG */
-}
-
-
-static void set_dma_addr( unsigned long paddr )
-
-{	unsigned long flags;
-
-	local_irq_save(flags);
-	dma_wd.dma_lo = (unsigned char)paddr;
-	paddr >>= 8;
-	MFPDELAY();
-	dma_wd.dma_md = (unsigned char)paddr;
-	paddr >>= 8;
-	MFPDELAY();
-	if (ATARIHW_PRESENT( EXTD_DMA ))
-		st_dma_ext_dmahi = (unsigned short)paddr;
-	else
-		dma_wd.dma_hi = (unsigned char)paddr;
-	MFPDELAY();
-	local_irq_restore(flags);
-}
-
-
-static unsigned long get_dma_addr( void )
-
-{	unsigned long	addr;
-	
-	addr = dma_wd.dma_lo & 0xff;
-	MFPDELAY();
-	addr |= (dma_wd.dma_md & 0xff) << 8;
-	MFPDELAY();
-	addr |= (dma_wd.dma_hi & 0xff) << 16;
-	MFPDELAY();
-
-	return( addr );
-}
-
-
-static ssize_t slm_write( struct file *file, const char *buf, size_t count,
-						  loff_t *ppos )
-
-{
-	struct inode *node = file->f_path.dentry->d_inode;
-	int		device = iminor(node);
-	int		n, filled, w, h;
-
-	while( SLMState == PRINTING ||
-		   (SLMState == FILLING && SLMBufOwner != device) ) {
-		interruptible_sleep_on( &slm_wait );
-		if (signal_pending(current))
-			return( -ERESTARTSYS );
-	}
-	if (SLMState == IDLE) {
-		/* first data of page: get current page size  */
-		if (slm_get_pagesize( device, &w, &h ))
-			return( -EIO );
-		BufferSize = w*h/8;
-		if (BufferSize > SLM_BUFFER_SIZE)
-			return( -ENOMEM );
-
-		SLMState = FILLING;
-		SLMBufOwner = device;
-	}
-
-	n = count;
-	filled = BufferP - SLMBuffer;
-	if (filled + n > BufferSize)
-		n = BufferSize - filled;
-
-	if (copy_from_user(BufferP, buf, n))
-		return -EFAULT;
-	BufferP += n;
-	filled += n;
-
-	if (filled == BufferSize) {
-		/* Check the paper size again! The user may have switched it in the
-		 * time between starting the data and finishing them. Would end up in
-		 * a trashy page... */
-		if (slm_get_pagesize( device, &w, &h ))
-			return( -EIO );
-		if (BufferSize != w*h/8) {
-			printk( KERN_NOTICE "slm%d: page size changed while printing\n",
-					device );
-			return( -EAGAIN );
-		}
-
-		SLMState = PRINTING;
-		/* choose a slice size that is a multiple of the line size */
-#ifndef SLM_CONT_CNT_REPROG
-		SLMSliceSize = SLM_SLICE_SIZE(w);
-#endif
-		
-		start_print( device );
-		sleep_on( &print_wait );
-		if (SLMError && IS_REAL_ERROR(SLMError)) {
-			printk( KERN_ERR "slm%d: %s\n", device, slm_errstr(SLMError) );
-			n = -EIO;
-		}
-
-		SLMState = IDLE;
-		BufferP = SLMBuffer;
-		wake_up_interruptible( &slm_wait );
-	}
-	
-	return( n );
-}
-
-
-/* ---------------------------------------------------------------------- */
-/*							   ioctl Functions							  */
-
-
-static int slm_ioctl( struct inode *inode, struct file *file,
-					  unsigned int cmd, unsigned long arg )
-
-{	int		device = iminor(inode), err;
-	
-	/* I can think of setting:
-	 *  - manual feed
-	 *  - paper format
-	 *  - copy count
-	 *  - ...
-	 * but haven't implemented that yet :-)
-	 * BTW, has anybody better docs about the MODE SENSE/MODE SELECT data?
-	 */
-	switch( cmd ) {
-
-	  case SLMIORESET:		/* reset buffer, i.e. empty the buffer */
-		if (!(file->f_mode & 2))
-			return( -EINVAL );
-		if (SLMState == PRINTING)
-			return( -EBUSY );
-		SLMState = IDLE;
-		BufferP = SLMBuffer;
-		wake_up_interruptible( &slm_wait );
-		return( 0 );
-		
-	  case SLMIOGSTAT: {	/* get status */
-		int stat;
-		char *str;
-
-		stat = slm_req_sense( device );
-		if (arg) {
-			str = slm_errstr( stat );
-			if (put_user(stat,
-    	    	    	    	     (long *)&((struct SLM_status *)arg)->stat))
-    	    	    	    	return -EFAULT;
-			if (copy_to_user( ((struct SLM_status *)arg)->str, str,
-						 strlen(str) + 1))
-				return -EFAULT;
-		}
-		return( stat );
-	  }
-		
-	  case SLMIOGPSIZE: {	/* get paper size */
-		int w, h;
-		
-		if ((err = slm_get_pagesize( device, &w, &h ))) return( err );
-		
-    	    	if (put_user(w, (long *)&((struct SLM_paper_size *)arg)->width))
-			return -EFAULT;
-		if (put_user(h, (long *)&((struct SLM_paper_size *)arg)->height))
-			return -EFAULT;
-		return( 0 );
-	  }
-		
-	  case SLMIOGMFEED:	/* get manual feed */
-		return( -EINVAL );
-
-	  case SLMIOSPSIZE:	/* set paper size */
-		return( -EINVAL );
-
-	  case SLMIOSMFEED:	/* set manual feed */
-		return( -EINVAL );
-
-	}
-	return( -EINVAL );
-}
-
-
-/* ---------------------------------------------------------------------- */
-/*							 Opening and Closing						  */
-
-
-static int slm_open( struct inode *inode, struct file *file )
-
-{	int device;
-	struct slm *sip;
-	
-	device = iminor(inode);
-	if (device >= N_SLM_Printers)
-		return( -ENXIO );
-	sip = &slm_info[device];
-
-	if (file->f_mode & 2) {
-		/* open for writing is exclusive */
-		if ( !atomic_dec_and_test(&sip->wr_ok) ) {
-			atomic_inc(&sip->wr_ok);	
-			return( -EBUSY );
-		}
-	}
-	if (file->f_mode & 1) {
-		/* open for reading is exclusive */
-                if ( !atomic_dec_and_test(&sip->rd_ok) ) {
-                        atomic_inc(&sip->rd_ok);
-                        return( -EBUSY );
-                }
-	}
-
-	return( 0 );
-}
-
-
-static int slm_release( struct inode *inode, struct file *file )
-
-{	int device;
-	struct slm *sip;
-	
-	device = iminor(inode);
-	sip = &slm_info[device];
-
-	if (file->f_mode & 2)
-		atomic_inc( &sip->wr_ok );
-	if (file->f_mode & 1)
-		atomic_inc( &sip->rd_ok );
-	
-	return( 0 );
-}
-
-
-/* ---------------------------------------------------------------------- */
-/*						 ACSI Primitives for the SLM					  */
-
-
-static int slm_req_sense( int device )
-
-{	int			stat, rv;
-	struct slm *sip = &slm_info[device];
-	
-	stdma_lock( NULL, NULL );
-
-	CMDSET_TARG_LUN( slmreqsense_cmd, sip->target, sip->lun );
-	if (!acsicmd_nodma( slmreqsense_cmd, 0 ) ||
-		(stat = acsi_getstatus()) < 0)
-		rv = SLMSTAT_ACSITO;
-	else
-		rv = stat & 0x1f;
-
-	ENABLE_IRQ();
-	stdma_release();
-	return( rv );
-}
-
-
-static int slm_mode_sense( int device, char *buffer, int abs_flag )
-
-{	unsigned char	stat, len;
-	int				rv = 0;
-	struct slm		*sip = &slm_info[device];
-	
-	stdma_lock( NULL, NULL );
-
-	CMDSET_TARG_LUN( slmmsense_cmd, sip->target, sip->lun );
-	slmmsense_cmd[5] = abs_flag ? 0x80 : 0;
-	if (!acsicmd_nodma( slmmsense_cmd, 0 )) {
-		rv = SLMSTAT_ACSITO;
-		goto the_end;
-	}
-
-	if (!acsi_extstatus( &stat, 1 )) {
-		acsi_end_extstatus();
-		rv = SLMSTAT_ACSITO;
-		goto the_end;
-	}
-	
-	if (!acsi_extstatus( &len, 1 )) {
-		acsi_end_extstatus();
-		rv = SLMSTAT_ACSITO;
-		goto the_end;
-	}
-	buffer[0] = len;
-	if (!acsi_extstatus( buffer+1, len )) {
-		acsi_end_extstatus();
-		rv = SLMSTAT_ACSITO;
-		goto the_end;
-	}
-	
-	acsi_end_extstatus();
-	rv = stat & 0x1f;
-
-  the_end:
-	ENABLE_IRQ();
-	stdma_release();
-	return( rv );
-}
-
-
-#if 0
-/* currently unused */
-static int slm_mode_select( int device, char *buffer, int len,
-							int default_flag )
-
-{	int			stat, rv;
-	struct slm	*sip = &slm_info[device];
-	
-	stdma_lock( NULL, NULL );
-
-	CMDSET_TARG_LUN( slmmselect_cmd, sip->target, sip->lun );
-	slmmselect_cmd[5] = default_flag ? 0x80 : 0;
-	if (!acsicmd_nodma( slmmselect_cmd, 0 )) {
-		rv = SLMSTAT_ACSITO;
-		goto the_end;
-	}
-
-	if (!default_flag) {
-		unsigned char c = len;
-		if (!acsi_extcmd( &c, 1 )) {
-			rv = SLMSTAT_ACSITO;
-			goto the_end;
-		}
-		if (!acsi_extcmd( buffer, len )) {
-			rv = SLMSTAT_ACSITO;
-			goto the_end;
-		}
-	}
-	
-	stat = acsi_getstatus();
-	rv = (stat < 0 ? SLMSTAT_ACSITO : stat);
-
-  the_end:
-	ENABLE_IRQ();
-	stdma_release();
-	return( rv );
-}
-#endif
-
-
-static int slm_get_pagesize( int device, int *w, int *h )
-
-{	char	buf[256];
-	int		stat;
-	
-	stat = slm_mode_sense( device, buf, 0 );
-	ENABLE_IRQ();
-	stdma_release();
-
-	if (stat != SLMSTAT_OK)
-		return( -EIO );
-
-	*w = (buf[3] << 8) | buf[4];
-	*h = (buf[1] << 8) | buf[2];
-	return( 0 );
-}
-
-
-/* ---------------------------------------------------------------------- */
-/*								Initialization							  */
-
-
-int attach_slm( int target, int lun )
-
-{	static int	did_register;
-	int			len;
-
-	if (N_SLM_Printers >= MAX_SLM) {
-		printk( KERN_WARNING "Too much SLMs\n" );
-		return( 0 );
-	}
-	
-	/* do an INQUIRY */
-	udelay(100);
-	CMDSET_TARG_LUN( slminquiry_cmd, target, lun );
-	if (!acsicmd_nodma( slminquiry_cmd, 0 )) {
-	  inq_timeout:
-		printk( KERN_ERR "SLM inquiry command timed out.\n" );
-	  inq_fail:
-		acsi_end_extstatus();
-		return( 0 );
-	}
-	/* read status and header of return data */
-	if (!acsi_extstatus( SLMBuffer, 6 ))
-		goto inq_timeout;
-
-	if (SLMBuffer[1] != 2) { /* device type == printer? */
-		printk( KERN_ERR "SLM inquiry returned device type != printer\n" );
-		goto inq_fail;
-	}
-	len = SLMBuffer[5];
-	
-	/* read id string */
-	if (!acsi_extstatus( SLMBuffer, len ))
-		goto inq_timeout;
-	acsi_end_extstatus();
-	SLMBuffer[len] = 0;
-
-	if (!did_register) {
-		did_register = 1;
-	}
-
-	slm_info[N_SLM_Printers].target = target;
-	slm_info[N_SLM_Printers].lun    = lun;
-	atomic_set(&slm_info[N_SLM_Printers].wr_ok, 1 ); 
-	atomic_set(&slm_info[N_SLM_Printers].rd_ok, 1 );
-	
-	printk( KERN_INFO "  Printer: %s\n", SLMBuffer );
-	printk( KERN_INFO "Detected slm%d at id %d lun %d\n",
-			N_SLM_Printers, target, lun );
-	N_SLM_Printers++;
-	return( 1 );
-}
-
-int slm_init( void )
-
-{
-	int i;
-	if (register_chrdev( ACSI_MAJOR, "slm", &slm_fops )) {
-		printk( KERN_ERR "Unable to get major %d for ACSI SLM\n", ACSI_MAJOR );
-		return -EBUSY;
-	}
-	
-	if (!(SLMBuffer = atari_stram_alloc( SLM_BUFFER_SIZE, "SLM" ))) {
-		printk( KERN_ERR "Unable to get SLM ST-Ram buffer.\n" );
-		unregister_chrdev( ACSI_MAJOR, "slm" );
-		return -ENOMEM;
-	}
-	BufferP = SLMBuffer;
-	SLMState = IDLE;
-	
-	return 0;
-}
-
-#ifdef MODULE
-
-/* from acsi.c */
-void acsi_attach_SLMs( int (*attach_func)( int, int ) );
-
-int init_module(void)
-{
-	int err;
-
-	if ((err = slm_init()))
-		return( err );
-	/* This calls attach_slm() for every target/lun where acsi.c detected a
-	 * printer */
-	acsi_attach_SLMs( attach_slm );
-	return( 0 );
-}
-
-void cleanup_module(void)
-{
-	if (unregister_chrdev( ACSI_MAJOR, "slm" ) != 0)
-		printk( KERN_ERR "acsi_slm: cleanup_module failed\n");
-	atari_stram_free( SLMBuffer );
-}
-#endif