tty: move a number of tty drivers from drivers/char/ to drivers/tty/

As planned by Arnd Bergmann, this moves the following drivers from
drivers/char/ to drivers/tty/ as that's where they really belong:
	amiserial
	nozomi
	synclink
	rocket
	cyclades
	moxa
	mxser
	isicom
	bfin_jtag_comm

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 0 insertions, 2757 deletions

diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
deleted file mode 100644
index d188f378684d..000000000000
--- a/drivers/char/mxser.c
+++ /dev/null
@@ -1,2757 +0,0 @@
-/*
- *          mxser.c  -- MOXA Smartio/Industio family multiport serial driver.
- *
- *      Copyright (C) 1999-2006  Moxa Technologies (support@moxa.com).
- *	Copyright (C) 2006-2008  Jiri Slaby <jirislaby@gmail.com>
- *
- *      This code is loosely based on the 1.8 moxa driver which is based on
- *	Linux serial driver, written by Linus Torvalds, Theodore T'so and
- *	others.
- *
- *      This program is free software; you can redistribute it and/or modify
- *      it under the terms of the GNU General Public License as published by
- *      the Free Software Foundation; either version 2 of the License, or
- *      (at your option) any later version.
- *
- *	Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox
- *	<alan@lxorguk.ukuu.org.uk>. The original 1.8 code is available on
- *	www.moxa.com.
- *	- Fixed x86_64 cleanness
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial.h>
-#include <linux/serial_reg.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/fcntl.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/bitops.h>
-#include <linux/slab.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-
-#include "mxser.h"
-
-#define	MXSER_VERSION	"2.0.5"		/* 1.14 */
-#define	MXSERMAJOR	 174
-
-#define MXSER_BOARDS		4	/* Max. boards */
-#define MXSER_PORTS_PER_BOARD	8	/* Max. ports per board */
-#define MXSER_PORTS		(MXSER_BOARDS * MXSER_PORTS_PER_BOARD)
-#define MXSER_ISR_PASS_LIMIT	100
-
-/*CheckIsMoxaMust return value*/
-#define MOXA_OTHER_UART		0x00
-#define MOXA_MUST_MU150_HWID	0x01
-#define MOXA_MUST_MU860_HWID	0x02
-
-#define WAKEUP_CHARS		256
-
-#define UART_MCR_AFE		0x20
-#define UART_LSR_SPECIAL	0x1E
-
-#define PCI_DEVICE_ID_POS104UL	0x1044
-#define PCI_DEVICE_ID_CB108	0x1080
-#define PCI_DEVICE_ID_CP102UF	0x1023
-#define PCI_DEVICE_ID_CP112UL	0x1120
-#define PCI_DEVICE_ID_CB114	0x1142
-#define PCI_DEVICE_ID_CP114UL	0x1143
-#define PCI_DEVICE_ID_CB134I	0x1341
-#define PCI_DEVICE_ID_CP138U	0x1380
-
-
-#define C168_ASIC_ID    1
-#define C104_ASIC_ID    2
-#define C102_ASIC_ID	0xB
-#define CI132_ASIC_ID	4
-#define CI134_ASIC_ID	3
-#define CI104J_ASIC_ID  5
-
-#define MXSER_HIGHBAUD	1
-#define MXSER_HAS2	2
-
-/* This is only for PCI */
-static const struct {
-	int type;
-	int tx_fifo;
-	int rx_fifo;
-	int xmit_fifo_size;
-	int rx_high_water;
-	int rx_trigger;
-	int rx_low_water;
-	long max_baud;
-} Gpci_uart_info[] = {
-	{MOXA_OTHER_UART, 16, 16, 16, 14, 14, 1, 921600L},
-	{MOXA_MUST_MU150_HWID, 64, 64, 64, 48, 48, 16, 230400L},
-	{MOXA_MUST_MU860_HWID, 128, 128, 128, 96, 96, 32, 921600L}
-};
-#define UART_INFO_NUM	ARRAY_SIZE(Gpci_uart_info)
-
-struct mxser_cardinfo {
-	char *name;
-	unsigned int nports;
-	unsigned int flags;
-};
-
-static const struct mxser_cardinfo mxser_cards[] = {
-/* 0*/	{ "C168 series",	8, },
-	{ "C104 series",	4, },
-	{ "CI-104J series",	4, },
-	{ "C168H/PCI series",	8, },
-	{ "C104H/PCI series",	4, },
-/* 5*/	{ "C102 series",	4, MXSER_HAS2 },	/* C102-ISA */
-	{ "CI-132 series",	4, MXSER_HAS2 },
-	{ "CI-134 series",	4, },
-	{ "CP-132 series",	2, },
-	{ "CP-114 series",	4, },
-/*10*/	{ "CT-114 series",	4, },
-	{ "CP-102 series",	2, MXSER_HIGHBAUD },
-	{ "CP-104U series",	4, },
-	{ "CP-168U series",	8, },
-	{ "CP-132U series",	2, },
-/*15*/	{ "CP-134U series",	4, },
-	{ "CP-104JU series",	4, },
-	{ "Moxa UC7000 Serial",	8, },		/* RC7000 */
-	{ "CP-118U series",	8, },
-	{ "CP-102UL series",	2, },
-/*20*/	{ "CP-102U series",	2, },
-	{ "CP-118EL series",	8, },
-	{ "CP-168EL series",	8, },
-	{ "CP-104EL series",	4, },
-	{ "CB-108 series",	8, },
-/*25*/	{ "CB-114 series",	4, },
-	{ "CB-134I series",	4, },
-	{ "CP-138U series",	8, },
-	{ "POS-104UL series",	4, },
-	{ "CP-114UL series",	4, },
-/*30*/	{ "CP-102UF series",	2, },
-	{ "CP-112UL series",	2, },
-};
-
-/* driver_data correspond to the lines in the structure above
-   see also ISA probe function before you change something */
-static struct pci_device_id mxser_pcibrds[] = {
-	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C168),	.driver_data = 3 },
-	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C104),	.driver_data = 4 },
-	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132),	.driver_data = 8 },
-	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP114),	.driver_data = 9 },
-	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CT114),	.driver_data = 10 },
-	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102),	.driver_data = 11 },
-	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104U),	.driver_data = 12 },
-	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168U),	.driver_data = 13 },
-	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132U),	.driver_data = 14 },
-	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP134U),	.driver_data = 15 },
-	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104JU),.driver_data = 16 },
-	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_RC7000),	.driver_data = 17 },
-	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118U),	.driver_data = 18 },
-	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102UL),.driver_data = 19 },
-	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102U),	.driver_data = 20 },
-	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118EL),.driver_data = 21 },
-	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168EL),.driver_data = 22 },
-	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104EL),.driver_data = 23 },
-	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB108),	.driver_data = 24 },
-	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB114),	.driver_data = 25 },
-	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB134I),	.driver_data = 26 },
-	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP138U),	.driver_data = 27 },
-	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_POS104UL),	.driver_data = 28 },
-	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP114UL),	.driver_data = 29 },
-	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP102UF),	.driver_data = 30 },
-	{ PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP112UL),	.driver_data = 31 },
-	{ }
-};
-MODULE_DEVICE_TABLE(pci, mxser_pcibrds);
-
-static unsigned long ioaddr[MXSER_BOARDS];
-static int ttymajor = MXSERMAJOR;
-
-/* Variables for insmod */
-
-MODULE_AUTHOR("Casper Yang");
-MODULE_DESCRIPTION("MOXA Smartio/Industio Family Multiport Board Device Driver");
-module_param_array(ioaddr, ulong, NULL, 0);
-MODULE_PARM_DESC(ioaddr, "ISA io addresses to look for a moxa board");
-module_param(ttymajor, int, 0);
-MODULE_LICENSE("GPL");
-
-struct mxser_log {
-	int tick;
-	unsigned long rxcnt[MXSER_PORTS];
-	unsigned long txcnt[MXSER_PORTS];
-};
-
-struct mxser_mon {
-	unsigned long rxcnt;
-	unsigned long txcnt;
-	unsigned long up_rxcnt;
-	unsigned long up_txcnt;
-	int modem_status;
-	unsigned char hold_reason;
-};
-
-struct mxser_mon_ext {
-	unsigned long rx_cnt[32];
-	unsigned long tx_cnt[32];
-	unsigned long up_rxcnt[32];
-	unsigned long up_txcnt[32];
-	int modem_status[32];
-
-	long baudrate[32];
-	int databits[32];
-	int stopbits[32];
-	int parity[32];
-	int flowctrl[32];
-	int fifo[32];
-	int iftype[32];
-};
-
-struct mxser_board;
-
-struct mxser_port {
-	struct tty_port port;
-	struct mxser_board *board;
-
-	unsigned long ioaddr;
-	unsigned long opmode_ioaddr;
-	int max_baud;
-
-	int rx_high_water;
-	int rx_trigger;		/* Rx fifo trigger level */
-	int rx_low_water;
-	int baud_base;		/* max. speed */
-	int type;		/* UART type */
-
-	int x_char;		/* xon/xoff character */
-	int IER;		/* Interrupt Enable Register */
-	int MCR;		/* Modem control register */
-
-	unsigned char stop_rx;
-	unsigned char ldisc_stop_rx;
-
-	int custom_divisor;
-	unsigned char err_shadow;
-
-	struct async_icount icount; /* kernel counters for 4 input interrupts */
-	int timeout;
-
-	int read_status_mask;
-	int ignore_status_mask;
-	int xmit_fifo_size;
-	int xmit_head;
-	int xmit_tail;
-	int xmit_cnt;
-
-	struct ktermios normal_termios;
-
-	struct mxser_mon mon_data;
-
-	spinlock_t slock;
-};
-
-struct mxser_board {
-	unsigned int idx;
-	int irq;
-	const struct mxser_cardinfo *info;
-	unsigned long vector;
-	unsigned long vector_mask;
-
-	int chip_flag;
-	int uart_type;
-
-	struct mxser_port ports[MXSER_PORTS_PER_BOARD];
-};
-
-struct mxser_mstatus {
-	tcflag_t cflag;
-	int cts;
-	int dsr;
-	int ri;
-	int dcd;
-};
-
-static struct mxser_board mxser_boards[MXSER_BOARDS];
-static struct tty_driver *mxvar_sdriver;
-static struct mxser_log mxvar_log;
-static int mxser_set_baud_method[MXSER_PORTS + 1];
-
-static void mxser_enable_must_enchance_mode(unsigned long baseio)
-{
-	u8 oldlcr;
-	u8 efr;
-
-	oldlcr = inb(baseio + UART_LCR);
-	outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
-
-	efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
-	efr |= MOXA_MUST_EFR_EFRB_ENABLE;
-
-	outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
-	outb(oldlcr, baseio + UART_LCR);
-}
-
-#ifdef	CONFIG_PCI
-static void mxser_disable_must_enchance_mode(unsigned long baseio)
-{
-	u8 oldlcr;
-	u8 efr;
-
-	oldlcr = inb(baseio + UART_LCR);
-	outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
-
-	efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
-	efr &= ~MOXA_MUST_EFR_EFRB_ENABLE;
-
-	outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
-	outb(oldlcr, baseio + UART_LCR);
-}
-#endif
-
-static void mxser_set_must_xon1_value(unsigned long baseio, u8 value)
-{
-	u8 oldlcr;
-	u8 efr;
-
-	oldlcr = inb(baseio + UART_LCR);
-	outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
-
-	efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
-	efr &= ~MOXA_MUST_EFR_BANK_MASK;
-	efr |= MOXA_MUST_EFR_BANK0;
-
-	outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
-	outb(value, baseio + MOXA_MUST_XON1_REGISTER);
-	outb(oldlcr, baseio + UART_LCR);
-}
-
-static void mxser_set_must_xoff1_value(unsigned long baseio, u8 value)
-{
-	u8 oldlcr;
-	u8 efr;
-
-	oldlcr = inb(baseio + UART_LCR);
-	outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
-
-	efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
-	efr &= ~MOXA_MUST_EFR_BANK_MASK;
-	efr |= MOXA_MUST_EFR_BANK0;
-
-	outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
-	outb(value, baseio + MOXA_MUST_XOFF1_REGISTER);
-	outb(oldlcr, baseio + UART_LCR);
-}
-
-static void mxser_set_must_fifo_value(struct mxser_port *info)
-{
-	u8 oldlcr;
-	u8 efr;
-
-	oldlcr = inb(info->ioaddr + UART_LCR);
-	outb(MOXA_MUST_ENTER_ENCHANCE, info->ioaddr + UART_LCR);
-
-	efr = inb(info->ioaddr + MOXA_MUST_EFR_REGISTER);
-	efr &= ~MOXA_MUST_EFR_BANK_MASK;
-	efr |= MOXA_MUST_EFR_BANK1;
-
-	outb(efr, info->ioaddr + MOXA_MUST_EFR_REGISTER);
-	outb((u8)info->rx_high_water, info->ioaddr + MOXA_MUST_RBRTH_REGISTER);
-	outb((u8)info->rx_trigger, info->ioaddr + MOXA_MUST_RBRTI_REGISTER);
-	outb((u8)info->rx_low_water, info->ioaddr + MOXA_MUST_RBRTL_REGISTER);
-	outb(oldlcr, info->ioaddr + UART_LCR);
-}
-
-static void mxser_set_must_enum_value(unsigned long baseio, u8 value)
-{
-	u8 oldlcr;
-	u8 efr;
-
-	oldlcr = inb(baseio + UART_LCR);
-	outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
-
-	efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
-	efr &= ~MOXA_MUST_EFR_BANK_MASK;
-	efr |= MOXA_MUST_EFR_BANK2;
-
-	outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
-	outb(value, baseio + MOXA_MUST_ENUM_REGISTER);
-	outb(oldlcr, baseio + UART_LCR);
-}
-
-#ifdef CONFIG_PCI
-static void mxser_get_must_hardware_id(unsigned long baseio, u8 *pId)
-{
-	u8 oldlcr;
-	u8 efr;
-
-	oldlcr = inb(baseio + UART_LCR);
-	outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
-
-	efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
-	efr &= ~MOXA_MUST_EFR_BANK_MASK;
-	efr |= MOXA_MUST_EFR_BANK2;
-
-	outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
-	*pId = inb(baseio + MOXA_MUST_HWID_REGISTER);
-	outb(oldlcr, baseio + UART_LCR);
-}
-#endif
-
-static void SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(unsigned long baseio)
-{
-	u8 oldlcr;
-	u8 efr;
-
-	oldlcr = inb(baseio + UART_LCR);
-	outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
-
-	efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
-	efr &= ~MOXA_MUST_EFR_SF_MASK;
-
-	outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
-	outb(oldlcr, baseio + UART_LCR);
-}
-
-static void mxser_enable_must_tx_software_flow_control(unsigned long baseio)
-{
-	u8 oldlcr;
-	u8 efr;
-
-	oldlcr = inb(baseio + UART_LCR);
-	outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
-
-	efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
-	efr &= ~MOXA_MUST_EFR_SF_TX_MASK;
-	efr |= MOXA_MUST_EFR_SF_TX1;
-
-	outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
-	outb(oldlcr, baseio + UART_LCR);
-}
-
-static void mxser_disable_must_tx_software_flow_control(unsigned long baseio)
-{
-	u8 oldlcr;
-	u8 efr;
-
-	oldlcr = inb(baseio + UART_LCR);
-	outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
-
-	efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
-	efr &= ~MOXA_MUST_EFR_SF_TX_MASK;
-
-	outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
-	outb(oldlcr, baseio + UART_LCR);
-}
-
-static void mxser_enable_must_rx_software_flow_control(unsigned long baseio)
-{
-	u8 oldlcr;
-	u8 efr;
-
-	oldlcr = inb(baseio + UART_LCR);
-	outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
-
-	efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
-	efr &= ~MOXA_MUST_EFR_SF_RX_MASK;
-	efr |= MOXA_MUST_EFR_SF_RX1;
-
-	outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
-	outb(oldlcr, baseio + UART_LCR);
-}
-
-static void mxser_disable_must_rx_software_flow_control(unsigned long baseio)
-{
-	u8 oldlcr;
-	u8 efr;
-
-	oldlcr = inb(baseio + UART_LCR);
-	outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
-
-	efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
-	efr &= ~MOXA_MUST_EFR_SF_RX_MASK;
-
-	outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
-	outb(oldlcr, baseio + UART_LCR);
-}
-
-#ifdef CONFIG_PCI
-static int __devinit CheckIsMoxaMust(unsigned long io)
-{
-	u8 oldmcr, hwid;
-	int i;
-
-	outb(0, io + UART_LCR);
-	mxser_disable_must_enchance_mode(io);
-	oldmcr = inb(io + UART_MCR);
-	outb(0, io + UART_MCR);
-	mxser_set_must_xon1_value(io, 0x11);
-	if ((hwid = inb(io + UART_MCR)) != 0) {
-		outb(oldmcr, io + UART_MCR);
-		return MOXA_OTHER_UART;
-	}
-
-	mxser_get_must_hardware_id(io, &hwid);
-	for (i = 1; i < UART_INFO_NUM; i++) { /* 0 = OTHER_UART */
-		if (hwid == Gpci_uart_info[i].type)
-			return (int)hwid;
-	}
-	return MOXA_OTHER_UART;
-}
-#endif
-
-static void process_txrx_fifo(struct mxser_port *info)
-{
-	int i;
-
-	if ((info->type == PORT_16450) || (info->type == PORT_8250)) {
-		info->rx_trigger = 1;
-		info->rx_high_water = 1;
-		info->rx_low_water = 1;
-		info->xmit_fifo_size = 1;
-	} else
-		for (i = 0; i < UART_INFO_NUM; i++)
-			if (info->board->chip_flag == Gpci_uart_info[i].type) {
-				info->rx_trigger = Gpci_uart_info[i].rx_trigger;
-				info->rx_low_water = Gpci_uart_info[i].rx_low_water;
-				info->rx_high_water = Gpci_uart_info[i].rx_high_water;
-				info->xmit_fifo_size = Gpci_uart_info[i].xmit_fifo_size;
-				break;
-			}
-}
-
-static unsigned char mxser_get_msr(int baseaddr, int mode, int port)
-{
-	static unsigned char mxser_msr[MXSER_PORTS + 1];
-	unsigned char status = 0;
-
-	status = inb(baseaddr + UART_MSR);
-
-	mxser_msr[port] &= 0x0F;
-	mxser_msr[port] |= status;
-	status = mxser_msr[port];
-	if (mode)
-		mxser_msr[port] = 0;
-
-	return status;
-}
-
-static int mxser_carrier_raised(struct tty_port *port)
-{
-	struct mxser_port *mp = container_of(port, struct mxser_port, port);
-	return (inb(mp->ioaddr + UART_MSR) & UART_MSR_DCD)?1:0;
-}
-
-static void mxser_dtr_rts(struct tty_port *port, int on)
-{
-	struct mxser_port *mp = container_of(port, struct mxser_port, port);
-	unsigned long flags;
-
-	spin_lock_irqsave(&mp->slock, flags);
-	if (on)
-		outb(inb(mp->ioaddr + UART_MCR) |
-			UART_MCR_DTR | UART_MCR_RTS, mp->ioaddr + UART_MCR);
-	else
-		outb(inb(mp->ioaddr + UART_MCR)&~(UART_MCR_DTR | UART_MCR_RTS),
-			mp->ioaddr + UART_MCR);
-	spin_unlock_irqrestore(&mp->slock, flags);
-}
-
-static int mxser_set_baud(struct tty_struct *tty, long newspd)
-{
-	struct mxser_port *info = tty->driver_data;
-	int quot = 0, baud;
-	unsigned char cval;
-
-	if (!info->ioaddr)
-		return -1;
-
-	if (newspd > info->max_baud)
-		return -1;
-
-	if (newspd == 134) {
-		quot = 2 * info->baud_base / 269;
-		tty_encode_baud_rate(tty, 134, 134);
-	} else if (newspd) {
-		quot = info->baud_base / newspd;
-		if (quot == 0)
-			quot = 1;
-		baud = info->baud_base/quot;
-		tty_encode_baud_rate(tty, baud, baud);
-	} else {
-		quot = 0;
-	}
-
-	info->timeout = ((info->xmit_fifo_size * HZ * 10 * quot) / info->baud_base);
-	info->timeout += HZ / 50;	/* Add .02 seconds of slop */
-
-	if (quot) {
-		info->MCR |= UART_MCR_DTR;
-		outb(info->MCR, info->ioaddr + UART_MCR);
-	} else {
-		info->MCR &= ~UART_MCR_DTR;
-		outb(info->MCR, info->ioaddr + UART_MCR);
-		return 0;
-	}
-
-	cval = inb(info->ioaddr + UART_LCR);
-
-	outb(cval | UART_LCR_DLAB, info->ioaddr + UART_LCR);	/* set DLAB */
-
-	outb(quot & 0xff, info->ioaddr + UART_DLL);	/* LS of divisor */
-	outb(quot >> 8, info->ioaddr + UART_DLM);	/* MS of divisor */
-	outb(cval, info->ioaddr + UART_LCR);	/* reset DLAB */
-
-#ifdef BOTHER
-	if (C_BAUD(tty) == BOTHER) {
-		quot = info->baud_base % newspd;
-		quot *= 8;
-		if (quot % newspd > newspd / 2) {
-			quot /= newspd;
-			quot++;
-		} else
-			quot /= newspd;
-
-		mxser_set_must_enum_value(info->ioaddr, quot);
-	} else
-#endif
-		mxser_set_must_enum_value(info->ioaddr, 0);
-
-	return 0;
-}
-
-/*
- * This routine is called to set the UART divisor registers to match
- * the specified baud rate for a serial port.
- */
-static int mxser_change_speed(struct tty_struct *tty,
-					struct ktermios *old_termios)
-{
-	struct mxser_port *info = tty->driver_data;
-	unsigned cflag, cval, fcr;
-	int ret = 0;
-	unsigned char status;
-
-	cflag = tty->termios->c_cflag;
-	if (!info->ioaddr)
-		return ret;
-
-	if (mxser_set_baud_method[tty->index] == 0)
-		mxser_set_baud(tty, tty_get_baud_rate(tty));
-
-	/* byte size and parity */
-	switch (cflag & CSIZE) {
-	case CS5:
-		cval = 0x00;
-		break;
-	case CS6:
-		cval = 0x01;
-		break;
-	case CS7:
-		cval = 0x02;
-		break;
-	case CS8:
-		cval = 0x03;
-		break;
-	default:
-		cval = 0x00;
-		break;		/* too keep GCC shut... */
-	}
-	if (cflag & CSTOPB)
-		cval |= 0x04;
-	if (cflag & PARENB)
-		cval |= UART_LCR_PARITY;
-	if (!(cflag & PARODD))
-		cval |= UART_LCR_EPAR;
-	if (cflag & CMSPAR)
-		cval |= UART_LCR_SPAR;
-
-	if ((info->type == PORT_8250) || (info->type == PORT_16450)) {
-		if (info->board->chip_flag) {
-			fcr = UART_FCR_ENABLE_FIFO;
-			fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE;
-			mxser_set_must_fifo_value(info);
-		} else
-			fcr = 0;
-	} else {
-		fcr = UART_FCR_ENABLE_FIFO;
-		if (info->board->chip_flag) {
-			fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE;
-			mxser_set_must_fifo_value(info);
-		} else {
-			switch (info->rx_trigger) {
-			case 1:
-				fcr |= UART_FCR_TRIGGER_1;
-				break;
-			case 4:
-				fcr |= UART_FCR_TRIGGER_4;
-				break;
-			case 8:
-				fcr |= UART_FCR_TRIGGER_8;
-				break;
-			default:
-				fcr |= UART_FCR_TRIGGER_14;
-				break;
-			}
-		}
-	}
-
-	/* CTS flow control flag and modem status interrupts */
-	info->IER &= ~UART_IER_MSI;
-	info->MCR &= ~UART_MCR_AFE;
-	if (cflag & CRTSCTS) {
-		info->port.flags |= ASYNC_CTS_FLOW;
-		info->IER |= UART_IER_MSI;
-		if ((info->type == PORT_16550A) || (info->board->chip_flag)) {
-			info->MCR |= UART_MCR_AFE;
-		} else {
-			status = inb(info->ioaddr + UART_MSR);
-			if (tty->hw_stopped) {
-				if (status & UART_MSR_CTS) {
-					tty->hw_stopped = 0;
-					if (info->type != PORT_16550A &&
-							!info->board->chip_flag) {
-						outb(info->IER & ~UART_IER_THRI,
-							info->ioaddr +
-							UART_IER);
-						info->IER |= UART_IER_THRI;
-						outb(info->IER, info->ioaddr +
-								UART_IER);
-					}
-					tty_wakeup(tty);
-				}
-			} else {
-				if (!(status & UART_MSR_CTS)) {
-					tty->hw_stopped = 1;
-					if ((info->type != PORT_16550A) &&
-							(!info->board->chip_flag)) {
-						info->IER &= ~UART_IER_THRI;
-						outb(info->IER, info->ioaddr +
-								UART_IER);
-					}
-				}
-			}
-		}
-	} else {
-		info->port.flags &= ~ASYNC_CTS_FLOW;
-	}
-	outb(info->MCR, info->ioaddr + UART_MCR);
-	if (cflag & CLOCAL) {
-		info->port.flags &= ~ASYNC_CHECK_CD;
-	} else {
-		info->port.flags |= ASYNC_CHECK_CD;
-		info->IER |= UART_IER_MSI;
-	}
-	outb(info->IER, info->ioaddr + UART_IER);
-
-	/*
-	 * Set up parity check flag
-	 */
-	info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
-	if (I_INPCK(tty))
-		info->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
-	if (I_BRKINT(tty) || I_PARMRK(tty))
-		info->read_status_mask |= UART_LSR_BI;
-
-	info->ignore_status_mask = 0;
-
-	if (I_IGNBRK(tty)) {
-		info->ignore_status_mask |= UART_LSR_BI;
-		info->read_status_mask |= UART_LSR_BI;
-		/*
-		 * If we're ignore parity and break indicators, ignore
-		 * overruns too.  (For real raw support).
-		 */
-		if (I_IGNPAR(tty)) {
-			info->ignore_status_mask |=
-						UART_LSR_OE |
-						UART_LSR_PE |
-						UART_LSR_FE;
-			info->read_status_mask |=
-						UART_LSR_OE |
-						UART_LSR_PE |
-						UART_LSR_FE;
-		}
-	}
-	if (info->board->chip_flag) {
-		mxser_set_must_xon1_value(info->ioaddr, START_CHAR(tty));
-		mxser_set_must_xoff1_value(info->ioaddr, STOP_CHAR(tty));
-		if (I_IXON(tty)) {
-			mxser_enable_must_rx_software_flow_control(
-					info->ioaddr);
-		} else {
-			mxser_disable_must_rx_software_flow_control(
-					info->ioaddr);
-		}
-		if (I_IXOFF(tty)) {
-			mxser_enable_must_tx_software_flow_control(
-					info->ioaddr);
-		} else {
-			mxser_disable_must_tx_software_flow_control(
-					info->ioaddr);
-		}
-	}
-
-
-	outb(fcr, info->ioaddr + UART_FCR);	/* set fcr */
-	outb(cval, info->ioaddr + UART_LCR);
-
-	return ret;
-}
-
-static void mxser_check_modem_status(struct tty_struct *tty,
-				struct mxser_port *port, int status)
-{
-	/* update input line counters */
-	if (status & UART_MSR_TERI)
-		port->icount.rng++;
-	if (status & UART_MSR_DDSR)
-		port->icount.dsr++;
-	if (status & UART_MSR_DDCD)
-		port->icount.dcd++;
-	if (status & UART_MSR_DCTS)
-		port->icount.cts++;
-	port->mon_data.modem_status = status;
-	wake_up_interruptible(&port->port.delta_msr_wait);
-
-	if ((port->port.flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
-		if (status & UART_MSR_DCD)
-			wake_up_interruptible(&port->port.open_wait);
-	}
-
-	if (port->port.flags & ASYNC_CTS_FLOW) {
-		if (tty->hw_stopped) {
-			if (status & UART_MSR_CTS) {
-				tty->hw_stopped = 0;
-
-				if ((port->type != PORT_16550A) &&
-						(!port->board->chip_flag)) {
-					outb(port->IER & ~UART_IER_THRI,
-						port->ioaddr + UART_IER);
-					port->IER |= UART_IER_THRI;
-					outb(port->IER, port->ioaddr +
-							UART_IER);
-				}
-				tty_wakeup(tty);
-			}
-		} else {
-			if (!(status & UART_MSR_CTS)) {
-				tty->hw_stopped = 1;
-				if (port->type != PORT_16550A &&
-						!port->board->chip_flag) {
-					port->IER &= ~UART_IER_THRI;
-					outb(port->IER, port->ioaddr +
-							UART_IER);
-				}
-			}
-		}
-	}
-}
-
-static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
-{
-	struct mxser_port *info = container_of(port, struct mxser_port, port);
-	unsigned long page;
-	unsigned long flags;
-
-	page = __get_free_page(GFP_KERNEL);
-	if (!page)
-		return -ENOMEM;
-
-	spin_lock_irqsave(&info->slock, flags);
-
-	if (!info->ioaddr || !info->type) {
-		set_bit(TTY_IO_ERROR, &tty->flags);
-		free_page(page);
-		spin_unlock_irqrestore(&info->slock, flags);
-		return 0;
-	}
-	info->port.xmit_buf = (unsigned char *) page;
-
-	/*
-	 * Clear the FIFO buffers and disable them
-	 * (they will be reenabled in mxser_change_speed())
-	 */
-	if (info->board->chip_flag)
-		outb((UART_FCR_CLEAR_RCVR |
-			UART_FCR_CLEAR_XMIT |
-			MOXA_MUST_FCR_GDA_MODE_ENABLE), info->ioaddr + UART_FCR);
-	else
-		outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT),
-			info->ioaddr + UART_FCR);
-
-	/*
-	 * At this point there's no way the LSR could still be 0xFF;
-	 * if it is, then bail out, because there's likely no UART
-	 * here.
-	 */
-	if (inb(info->ioaddr + UART_LSR) == 0xff) {
-		spin_unlock_irqrestore(&info->slock, flags);
-		if (capable(CAP_SYS_ADMIN)) {
-			set_bit(TTY_IO_ERROR, &tty->flags);
-			return 0;
-		} else
-			return -ENODEV;
-	}
-
-	/*
-	 * Clear the interrupt registers.
-	 */
-	(void) inb(info->ioaddr + UART_LSR);
-	(void) inb(info->ioaddr + UART_RX);
-	(void) inb(info->ioaddr + UART_IIR);
-	(void) inb(info->ioaddr + UART_MSR);
-
-	/*
-	 * Now, initialize the UART
-	 */
-	outb(UART_LCR_WLEN8, info->ioaddr + UART_LCR);	/* reset DLAB */
-	info->MCR = UART_MCR_DTR | UART_MCR_RTS;
-	outb(info->MCR, info->ioaddr + UART_MCR);
-
-	/*
-	 * Finally, enable interrupts
-	 */
-	info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI;
-
-	if (info->board->chip_flag)
-		info->IER |= MOXA_MUST_IER_EGDAI;
-	outb(info->IER, info->ioaddr + UART_IER);	/* enable interrupts */
-
-	/*
-	 * And clear the interrupt registers again for luck.
-	 */
-	(void) inb(info->ioaddr + UART_LSR);
-	(void) inb(info->ioaddr + UART_RX);
-	(void) inb(info->ioaddr + UART_IIR);
-	(void) inb(info->ioaddr + UART_MSR);
-
-	clear_bit(TTY_IO_ERROR, &tty->flags);
-	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-
-	/*
-	 * and set the speed of the serial port
-	 */
-	mxser_change_speed(tty, NULL);
-	spin_unlock_irqrestore(&info->slock, flags);
-
-	return 0;
-}
-
-/*
- * This routine will shutdown a serial port
- */
-static void mxser_shutdown_port(struct tty_port *port)
-{
-	struct mxser_port *info = container_of(port, struct mxser_port, port);
-	unsigned long flags;
-
-	spin_lock_irqsave(&info->slock, flags);
-
-	/*
-	 * clear delta_msr_wait queue to avoid mem leaks: we may free the irq
-	 * here so the queue might never be waken up
-	 */
-	wake_up_interruptible(&info->port.delta_msr_wait);
-
-	/*
-	 * Free the xmit buffer, if necessary
-	 */
-	if (info->port.xmit_buf) {
-		free_page((unsigned long) info->port.xmit_buf);
-		info->port.xmit_buf = NULL;
-	}
-
-	info->IER = 0;
-	outb(0x00, info->ioaddr + UART_IER);
-
-	/* clear Rx/Tx FIFO's */
-	if (info->board->chip_flag)
-		outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT |
-				MOXA_MUST_FCR_GDA_MODE_ENABLE,
-				info->ioaddr + UART_FCR);
-	else
-		outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
-			info->ioaddr + UART_FCR);
-
-	/* read data port to reset things */
-	(void) inb(info->ioaddr + UART_RX);
-
-
-	if (info->board->chip_flag)
-		SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(info->ioaddr);
-
-	spin_unlock_irqrestore(&info->slock, flags);
-}
-
-/*
- * This routine is called whenever a serial port is opened.  It
- * enables interrupts for a serial port, linking in its async structure into
- * the IRQ chain.   It also performs the serial-specific
- * initialization for the tty structure.
- */
-static int mxser_open(struct tty_struct *tty, struct file *filp)
-{
-	struct mxser_port *info;
-	int line;
-
-	line = tty->index;
-	if (line == MXSER_PORTS)
-		return 0;
-	if (line < 0 || line > MXSER_PORTS)
-		return -ENODEV;
-	info = &mxser_boards[line / MXSER_PORTS_PER_BOARD].ports[line % MXSER_PORTS_PER_BOARD];
-	if (!info->ioaddr)
-		return -ENODEV;
-
-	tty->driver_data = info;
-	return tty_port_open(&info->port, tty, filp);
-}
-
-static void mxser_flush_buffer(struct tty_struct *tty)
-{
-	struct mxser_port *info = tty->driver_data;
-	char fcr;
-	unsigned long flags;
-
-
-	spin_lock_irqsave(&info->slock, flags);
-	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-
-	fcr = inb(info->ioaddr + UART_FCR);
-	outb((fcr | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT),
-		info->ioaddr + UART_FCR);
-	outb(fcr, info->ioaddr + UART_FCR);
-
-	spin_unlock_irqrestore(&info->slock, flags);
-
-	tty_wakeup(tty);
-}
-
-
-static void mxser_close_port(struct tty_port *port)
-{
-	struct mxser_port *info = container_of(port, struct mxser_port, port);
-	unsigned long timeout;
-	/*
-	 * At this point we stop accepting input.  To do this, we
-	 * disable the receive line status interrupts, and tell the
-	 * interrupt driver to stop checking the data ready bit in the
-	 * line status register.
-	 */
-	info->IER &= ~UART_IER_RLSI;
-	if (info->board->chip_flag)
-		info->IER &= ~MOXA_MUST_RECV_ISR;
-
-	outb(info->IER, info->ioaddr + UART_IER);
-	/*
-	 * Before we drop DTR, make sure the UART transmitter
-	 * has completely drained; this is especially
-	 * important if there is a transmit FIFO!
-	 */
-	timeout = jiffies + HZ;
-	while (!(inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT)) {
-		schedule_timeout_interruptible(5);
-		if (time_after(jiffies, timeout))
-			break;
-	}
-}
-
-/*
- * This routine is called when the serial port gets closed.  First, we
- * wait for the last remaining data to be sent.  Then, we unlink its
- * async structure from the interrupt chain if necessary, and we free
- * that IRQ if nothing is left in the chain.
- */
-static void mxser_close(struct tty_struct *tty, struct file *filp)
-{
-	struct mxser_port *info = tty->driver_data;
-	struct tty_port *port = &info->port;
-
-	if (tty->index == MXSER_PORTS || info == NULL)
-		return;
-	if (tty_port_close_start(port, tty, filp) == 0)
-		return;
-	mutex_lock(&port->mutex);
-	mxser_close_port(port);
-	mxser_flush_buffer(tty);
-	mxser_shutdown_port(port);
-	clear_bit(ASYNCB_INITIALIZED, &port->flags);
-	mutex_unlock(&port->mutex);
-	/* Right now the tty_port set is done outside of the close_end helper
-	   as we don't yet have everyone using refcounts */	
-	tty_port_close_end(port, tty);
-	tty_port_tty_set(port, NULL);
-}
-
-static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int count)
-{
-	int c, total = 0;
-	struct mxser_port *info = tty->driver_data;
-	unsigned long flags;
-
-	if (!info->port.xmit_buf)
-		return 0;
-
-	while (1) {
-		c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
-					  SERIAL_XMIT_SIZE - info->xmit_head));
-		if (c <= 0)
-			break;
-
-		memcpy(info->port.xmit_buf + info->xmit_head, buf, c);
-		spin_lock_irqsave(&info->slock, flags);
-		info->xmit_head = (info->xmit_head + c) &
-				  (SERIAL_XMIT_SIZE - 1);
-		info->xmit_cnt += c;
-		spin_unlock_irqrestore(&info->slock, flags);
-
-		buf += c;
-		count -= c;
-		total += c;
-	}
-
-	if (info->xmit_cnt && !tty->stopped) {
-		if (!tty->hw_stopped ||
-				(info->type == PORT_16550A) ||
-				(info->board->chip_flag)) {
-			spin_lock_irqsave(&info->slock, flags);
-			outb(info->IER & ~UART_IER_THRI, info->ioaddr +
-					UART_IER);
-			info->IER |= UART_IER_THRI;
-			outb(info->IER, info->ioaddr + UART_IER);
-			spin_unlock_irqrestore(&info->slock, flags);
-		}
-	}
-	return total;
-}
-
-static int mxser_put_char(struct tty_struct *tty, unsigned char ch)
-{
-	struct mxser_port *info = tty->driver_data;
-	unsigned long flags;
-
-	if (!info->port.xmit_buf)
-		return 0;
-
-	if (info->xmit_cnt >= SERIAL_XMIT_SIZE - 1)
-		return 0;
-
-	spin_lock_irqsave(&info->slock, flags);
-	info->port.xmit_buf[info->xmit_head++] = ch;
-	info->xmit_head &= SERIAL_XMIT_SIZE - 1;
-	info->xmit_cnt++;
-	spin_unlock_irqrestore(&info->slock, flags);
-	if (!tty->stopped) {
-		if (!tty->hw_stopped ||
-				(info->type == PORT_16550A) ||
-				info->board->chip_flag) {
-			spin_lock_irqsave(&info->slock, flags);
-			outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER);
-			info->IER |= UART_IER_THRI;
-			outb(info->IER, info->ioaddr + UART_IER);
-			spin_unlock_irqrestore(&info->slock, flags);
-		}
-	}
-	return 1;
-}
-
-
-static void mxser_flush_chars(struct tty_struct *tty)
-{
-	struct mxser_port *info = tty->driver_data;
-	unsigned long flags;
-
-	if (info->xmit_cnt <= 0 || tty->stopped || !info->port.xmit_buf ||
-			(tty->hw_stopped && info->type != PORT_16550A &&
-			 !info->board->chip_flag))
-		return;
-
-	spin_lock_irqsave(&info->slock, flags);
-
-	outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER);
-	info->IER |= UART_IER_THRI;
-	outb(info->IER, info->ioaddr + UART_IER);
-
-	spin_unlock_irqrestore(&info->slock, flags);
-}
-
-static int mxser_write_room(struct tty_struct *tty)
-{
-	struct mxser_port *info = tty->driver_data;
-	int ret;
-
-	ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
-	return ret < 0 ? 0 : ret;
-}
-
-static int mxser_chars_in_buffer(struct tty_struct *tty)
-{
-	struct mxser_port *info = tty->driver_data;
-	return info->xmit_cnt;
-}
-
-/*
- * ------------------------------------------------------------
- * friends of mxser_ioctl()
- * ------------------------------------------------------------
- */
-static int mxser_get_serial_info(struct tty_struct *tty,
-		struct serial_struct __user *retinfo)
-{
-	struct mxser_port *info = tty->driver_data;
-	struct serial_struct tmp = {
-		.type = info->type,
-		.line = tty->index,
-		.port = info->ioaddr,
-		.irq = info->board->irq,
-		.flags = info->port.flags,
-		.baud_base = info->baud_base,
-		.close_delay = info->port.close_delay,
-		.closing_wait = info->port.closing_wait,
-		.custom_divisor = info->custom_divisor,
-		.hub6 = 0
-	};
-	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
-		return -EFAULT;
-	return 0;
-}
-
-static int mxser_set_serial_info(struct tty_struct *tty,
-		struct serial_struct __user *new_info)
-{
-	struct mxser_port *info = tty->driver_data;
-	struct tty_port *port = &info->port;
-	struct serial_struct new_serial;
-	speed_t baud;
-	unsigned long sl_flags;
-	unsigned int flags;
-	int retval = 0;
-
-	if (!new_info || !info->ioaddr)
-		return -ENODEV;
-	if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
-		return -EFAULT;
-
-	if (new_serial.irq != info->board->irq ||
-			new_serial.port != info->ioaddr)
-		return -EINVAL;
-
-	flags = port->flags & ASYNC_SPD_MASK;
-
-	if (!capable(CAP_SYS_ADMIN)) {
-		if ((new_serial.baud_base != info->baud_base) ||
-				(new_serial.close_delay != info->port.close_delay) ||
-				((new_serial.flags & ~ASYNC_USR_MASK) != (info->port.flags & ~ASYNC_USR_MASK)))
-			return -EPERM;
-		info->port.flags = ((info->port.flags & ~ASYNC_USR_MASK) |
-				(new_serial.flags & ASYNC_USR_MASK));
-	} else {
-		/*
-		 * OK, past this point, all the error checking has been done.
-		 * At this point, we start making changes.....
-		 */
-		port->flags = ((port->flags & ~ASYNC_FLAGS) |
-				(new_serial.flags & ASYNC_FLAGS));
-		port->close_delay = new_serial.close_delay * HZ / 100;
-		port->closing_wait = new_serial.closing_wait * HZ / 100;
-		tty->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-		if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST &&
-				(new_serial.baud_base != info->baud_base ||
-				new_serial.custom_divisor !=
-				info->custom_divisor)) {
-			if (new_serial.custom_divisor == 0)
-				return -EINVAL;
-			baud = new_serial.baud_base / new_serial.custom_divisor;
-			tty_encode_baud_rate(tty, baud, baud);
-		}
-	}
-
-	info->type = new_serial.type;
-
-	process_txrx_fifo(info);
-
-	if (test_bit(ASYNCB_INITIALIZED, &port->flags)) {
-		if (flags != (port->flags & ASYNC_SPD_MASK)) {
-			spin_lock_irqsave(&info->slock, sl_flags);
-			mxser_change_speed(tty, NULL);
-			spin_unlock_irqrestore(&info->slock, sl_flags);
-		}
-	} else {
-		retval = mxser_activate(port, tty);
-		if (retval == 0)
-			set_bit(ASYNCB_INITIALIZED, &port->flags);
-	}
-	return retval;
-}
-
-/*
- * mxser_get_lsr_info - get line status register info
- *
- * Purpose: Let user call ioctl() to get info when the UART physically
- *	    is emptied.  On bus types like RS485, the transmitter must
- *	    release the bus after transmitting. This must be done when
- *	    the transmit shift register is empty, not be done when the
- *	    transmit holding register is empty.  This functionality
- *	    allows an RS485 driver to be written in user space.
- */
-static int mxser_get_lsr_info(struct mxser_port *info,
-		unsigned int __user *value)
-{
-	unsigned char status;
-	unsigned int result;
-	unsigned long flags;
-
-	spin_lock_irqsave(&info->slock, flags);
-	status = inb(info->ioaddr + UART_LSR);
-	spin_unlock_irqrestore(&info->slock, flags);
-	result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0);
-	return put_user(result, value);
-}
-
-static int mxser_tiocmget(struct tty_struct *tty)
-{
-	struct mxser_port *info = tty->driver_data;
-	unsigned char control, status;
-	unsigned long flags;
-
-
-	if (tty->index == MXSER_PORTS)
-		return -ENOIOCTLCMD;
-	if (test_bit(TTY_IO_ERROR, &tty->flags))
-		return -EIO;
-
-	control = info->MCR;
-
-	spin_lock_irqsave(&info->slock, flags);
-	status = inb(info->ioaddr + UART_MSR);
-	if (status & UART_MSR_ANY_DELTA)
-		mxser_check_modem_status(tty, info, status);
-	spin_unlock_irqrestore(&info->slock, flags);
-	return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) |
-		    ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) |
-		    ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) |
-		    ((status & UART_MSR_RI) ? TIOCM_RNG : 0) |
-		    ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) |
-		    ((status & UART_MSR_CTS) ? TIOCM_CTS : 0);
-}
-
-static int mxser_tiocmset(struct tty_struct *tty,
-		unsigned int set, unsigned int clear)
-{
-	struct mxser_port *info = tty->driver_data;
-	unsigned long flags;
-
-
-	if (tty->index == MXSER_PORTS)
-		return -ENOIOCTLCMD;
-	if (test_bit(TTY_IO_ERROR, &tty->flags))
-		return -EIO;
-
-	spin_lock_irqsave(&info->slock, flags);
-
-	if (set & TIOCM_RTS)
-		info->MCR |= UART_MCR_RTS;
-	if (set & TIOCM_DTR)
-		info->MCR |= UART_MCR_DTR;
-
-	if (clear & TIOCM_RTS)
-		info->MCR &= ~UART_MCR_RTS;
-	if (clear & TIOCM_DTR)
-		info->MCR &= ~UART_MCR_DTR;
-
-	outb(info->MCR, info->ioaddr + UART_MCR);
-	spin_unlock_irqrestore(&info->slock, flags);
-	return 0;
-}
-
-static int __init mxser_program_mode(int port)
-{
-	int id, i, j, n;
-
-	outb(0, port);
-	outb(0, port);
-	outb(0, port);
-	(void)inb(port);
-	(void)inb(port);
-	outb(0, port);
-	(void)inb(port);
-
-	id = inb(port + 1) & 0x1F;
-	if ((id != C168_ASIC_ID) &&
-			(id != C104_ASIC_ID) &&
-			(id != C102_ASIC_ID) &&
-			(id != CI132_ASIC_ID) &&
-			(id != CI134_ASIC_ID) &&
-			(id != CI104J_ASIC_ID))
-		return -1;
-	for (i = 0, j = 0; i < 4; i++) {
-		n = inb(port + 2);
-		if (n == 'M') {
-			j = 1;
-		} else if ((j == 1) && (n == 1)) {
-			j = 2;
-			break;
-		} else
-			j = 0;
-	}
-	if (j != 2)
-		id = -2;
-	return id;
-}
-
-static void __init mxser_normal_mode(int port)
-{
-	int i, n;
-
-	outb(0xA5, port + 1);
-	outb(0x80, port + 3);
-	outb(12, port + 0);	/* 9600 bps */
-	outb(0, port + 1);
-	outb(0x03, port + 3);	/* 8 data bits */
-	outb(0x13, port + 4);	/* loop back mode */
-	for (i = 0; i < 16; i++) {
-		n = inb(port + 5);
-		if ((n & 0x61) == 0x60)
-			break;
-		if ((n & 1) == 1)
-			(void)inb(port);
-	}
-	outb(0x00, port + 4);
-}
-
-#define CHIP_SK 	0x01	/* Serial Data Clock  in Eprom */
-#define CHIP_DO 	0x02	/* Serial Data Output in Eprom */
-#define CHIP_CS 	0x04	/* Serial Chip Select in Eprom */
-#define CHIP_DI 	0x08	/* Serial Data Input  in Eprom */
-#define EN_CCMD 	0x000	/* Chip's command register     */
-#define EN0_RSARLO	0x008	/* Remote start address reg 0  */
-#define EN0_RSARHI	0x009	/* Remote start address reg 1  */
-#define EN0_RCNTLO	0x00A	/* Remote byte count reg WR    */
-#define EN0_RCNTHI	0x00B	/* Remote byte count reg WR    */
-#define EN0_DCFG	0x00E	/* Data configuration reg WR   */
-#define EN0_PORT	0x010	/* Rcv missed frame error counter RD */
-#define ENC_PAGE0	0x000	/* Select page 0 of chip registers   */
-#define ENC_PAGE3	0x0C0	/* Select page 3 of chip registers   */
-static int __init mxser_read_register(int port, unsigned short *regs)
-{
-	int i, k, value, id;
-	unsigned int j;
-
-	id = mxser_program_mode(port);
-	if (id < 0)
-		return id;
-	for (i = 0; i < 14; i++) {
-		k = (i & 0x3F) | 0x180;
-		for (j = 0x100; j > 0; j >>= 1) {
-			outb(CHIP_CS, port);
-			if (k & j) {
-				outb(CHIP_CS | CHIP_DO, port);
-				outb(CHIP_CS | CHIP_DO | CHIP_SK, port);	/* A? bit of read */
-			} else {
-				outb(CHIP_CS, port);
-				outb(CHIP_CS | CHIP_SK, port);	/* A? bit of read */
-			}
-		}
-		(void)inb(port);
-		value = 0;
-		for (k = 0, j = 0x8000; k < 16; k++, j >>= 1) {
-			outb(CHIP_CS, port);
-			outb(CHIP_CS | CHIP_SK, port);
-			if (inb(port) & CHIP_DI)
-				value |= j;
-		}
-		regs[i] = value;
-		outb(0, port);
-	}
-	mxser_normal_mode(port);
-	return id;
-}
-
-static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
-{
-	struct mxser_port *ip;
-	struct tty_port *port;
-	struct tty_struct *tty;
-	int result, status;
-	unsigned int i, j;
-	int ret = 0;
-
-	switch (cmd) {
-	case MOXA_GET_MAJOR:
-		if (printk_ratelimit())
-			printk(KERN_WARNING "mxser: '%s' uses deprecated ioctl "
-					"%x (GET_MAJOR), fix your userspace\n",
-					current->comm, cmd);
-		return put_user(ttymajor, (int __user *)argp);
-
-	case MOXA_CHKPORTENABLE:
-		result = 0;
-		for (i = 0; i < MXSER_BOARDS; i++)
-			for (j = 0; j < MXSER_PORTS_PER_BOARD; j++)
-				if (mxser_boards[i].ports[j].ioaddr)
-					result |= (1 << i);
-		return put_user(result, (unsigned long __user *)argp);
-	case MOXA_GETDATACOUNT:
-		/* The receive side is locked by port->slock but it isn't
-		   clear that an exact snapshot is worth copying here */
-		if (copy_to_user(argp, &mxvar_log, sizeof(mxvar_log)))
-			ret = -EFAULT;
-		return ret;
-	case MOXA_GETMSTATUS: {
-		struct mxser_mstatus ms, __user *msu = argp;
-		for (i = 0; i < MXSER_BOARDS; i++)
-			for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) {
-				ip = &mxser_boards[i].ports[j];
-				port = &ip->port;
-				memset(&ms, 0, sizeof(ms));
-
-				mutex_lock(&port->mutex);
-				if (!ip->ioaddr)
-					goto copy;
-				
-				tty = tty_port_tty_get(port);
-
-				if (!tty || !tty->termios)
-					ms.cflag = ip->normal_termios.c_cflag;
-				else
-					ms.cflag = tty->termios->c_cflag;
-				tty_kref_put(tty);
-				spin_lock_irq(&ip->slock);
-				status = inb(ip->ioaddr + UART_MSR);
-				spin_unlock_irq(&ip->slock);
-				if (status & UART_MSR_DCD)
-					ms.dcd = 1;
-				if (status & UART_MSR_DSR)
-					ms.dsr = 1;
-				if (status & UART_MSR_CTS)
-					ms.cts = 1;
-			copy:
-				mutex_unlock(&port->mutex);
-				if (copy_to_user(msu, &ms, sizeof(ms)))
-					return -EFAULT;
-				msu++;
-			}
-		return 0;
-	}
-	case MOXA_ASPP_MON_EXT: {
-		struct mxser_mon_ext *me; /* it's 2k, stack unfriendly */
-		unsigned int cflag, iflag, p;
-		u8 opmode;
-
-		me = kzalloc(sizeof(*me), GFP_KERNEL);
-		if (!me)
-			return -ENOMEM;
-
-		for (i = 0, p = 0; i < MXSER_BOARDS; i++) {
-			for (j = 0; j < MXSER_PORTS_PER_BOARD; j++, p++) {
-				if (p >= ARRAY_SIZE(me->rx_cnt)) {
-					i = MXSER_BOARDS;
-					break;
-				}
-				ip = &mxser_boards[i].ports[j];
-				port = &ip->port;
-
-				mutex_lock(&port->mutex);
-				if (!ip->ioaddr) {
-					mutex_unlock(&port->mutex);
-					continue;
-				}
-
-				spin_lock_irq(&ip->slock);
-				status = mxser_get_msr(ip->ioaddr, 0, p);
-
-				if (status & UART_MSR_TERI)
-					ip->icount.rng++;
-				if (status & UART_MSR_DDSR)
-					ip->icount.dsr++;
-				if (status & UART_MSR_DDCD)
-					ip->icount.dcd++;
-				if (status & UART_MSR_DCTS)
-					ip->icount.cts++;
-
-				ip->mon_data.modem_status = status;
-				me->rx_cnt[p] = ip->mon_data.rxcnt;
-				me->tx_cnt[p] = ip->mon_data.txcnt;
-				me->up_rxcnt[p] = ip->mon_data.up_rxcnt;
-				me->up_txcnt[p] = ip->mon_data.up_txcnt;
-				me->modem_status[p] =
-					ip->mon_data.modem_status;
-				spin_unlock_irq(&ip->slock);
-
-				tty = tty_port_tty_get(&ip->port);
-
-				if (!tty || !tty->termios) {
-					cflag = ip->normal_termios.c_cflag;
-					iflag = ip->normal_termios.c_iflag;
-					me->baudrate[p] = tty_termios_baud_rate(&ip->normal_termios);
-				} else {
-					cflag = tty->termios->c_cflag;
-					iflag = tty->termios->c_iflag;
-					me->baudrate[p] = tty_get_baud_rate(tty);
-				}
-				tty_kref_put(tty);
-
-				me->databits[p] = cflag & CSIZE;
-				me->stopbits[p] = cflag & CSTOPB;
-				me->parity[p] = cflag & (PARENB | PARODD |
-						CMSPAR);
-
-				if (cflag & CRTSCTS)
-					me->flowctrl[p] |= 0x03;
-
-				if (iflag & (IXON | IXOFF))
-					me->flowctrl[p] |= 0x0C;
-
-				if (ip->type == PORT_16550A)
-					me->fifo[p] = 1;
-
-				opmode = inb(ip->opmode_ioaddr)>>((p % 4) * 2);
-				opmode &= OP_MODE_MASK;
-				me->iftype[p] = opmode;
-				mutex_unlock(&port->mutex);
-			}
-		}
-		if (copy_to_user(argp, me, sizeof(*me)))
-			ret = -EFAULT;
-		kfree(me);
-		return ret;
-	}
-	default:
-		return -ENOIOCTLCMD;
-	}
-	return 0;
-}
-
-static int mxser_cflags_changed(struct mxser_port *info, unsigned long arg,
-		struct async_icount *cprev)
-{
-	struct async_icount cnow;
-	unsigned long flags;
-	int ret;
-
-	spin_lock_irqsave(&info->slock, flags);
-	cnow = info->icount;	/* atomic copy */
-	spin_unlock_irqrestore(&info->slock, flags);
-
-	ret =	((arg & TIOCM_RNG) && (cnow.rng != cprev->rng)) ||
-		((arg & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) ||
-		((arg & TIOCM_CD)  && (cnow.dcd != cprev->dcd)) ||
-		((arg & TIOCM_CTS) && (cnow.cts != cprev->cts));
-
-	*cprev = cnow;
-
-	return ret;
-}
-
-static int mxser_ioctl(struct tty_struct *tty,
-		unsigned int cmd, unsigned long arg)
-{
-	struct mxser_port *info = tty->driver_data;
-	struct tty_port *port = &info->port;
-	struct async_icount cnow;
-	unsigned long flags;
-	void __user *argp = (void __user *)arg;
-	int retval;
-
-	if (tty->index == MXSER_PORTS)
-		return mxser_ioctl_special(cmd, argp);
-
-	if (cmd == MOXA_SET_OP_MODE || cmd == MOXA_GET_OP_MODE) {
-		int p;
-		unsigned long opmode;
-		static unsigned char ModeMask[] = { 0xfc, 0xf3, 0xcf, 0x3f };
-		int shiftbit;
-		unsigned char val, mask;
-
-		p = tty->index % 4;
-		if (cmd == MOXA_SET_OP_MODE) {
-			if (get_user(opmode, (int __user *) argp))
-				return -EFAULT;
-			if (opmode != RS232_MODE &&
-					opmode != RS485_2WIRE_MODE &&
-					opmode != RS422_MODE &&
-					opmode != RS485_4WIRE_MODE)
-				return -EFAULT;
-			mask = ModeMask[p];
-			shiftbit = p * 2;
-			spin_lock_irq(&info->slock);
-			val = inb(info->opmode_ioaddr);
-			val &= mask;
-			val |= (opmode << shiftbit);
-			outb(val, info->opmode_ioaddr);
-			spin_unlock_irq(&info->slock);
-		} else {
-			shiftbit = p * 2;
-			spin_lock_irq(&info->slock);
-			opmode = inb(info->opmode_ioaddr) >> shiftbit;
-			spin_unlock_irq(&info->slock);
-			opmode &= OP_MODE_MASK;
-			if (put_user(opmode, (int __user *)argp))
-				return -EFAULT;
-		}
-		return 0;
-	}
-
-	if (cmd != TIOCGSERIAL && cmd != TIOCMIWAIT &&
-			test_bit(TTY_IO_ERROR, &tty->flags))
-		return -EIO;
-
-	switch (cmd) {
-	case TIOCGSERIAL:
-		mutex_lock(&port->mutex);
-		retval = mxser_get_serial_info(tty, argp);
-		mutex_unlock(&port->mutex);
-		return retval;
-	case TIOCSSERIAL:
-		mutex_lock(&port->mutex);
-		retval = mxser_set_serial_info(tty, argp);
-		mutex_unlock(&port->mutex);
-		return retval;
-	case TIOCSERGETLSR:	/* Get line status register */
-		return  mxser_get_lsr_info(info, argp);
-		/*
-		 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
-		 * - mask passed in arg for lines of interest
-		 *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
-		 * Caller should use TIOCGICOUNT to see which one it was
-		 */
-	case TIOCMIWAIT:
-		spin_lock_irqsave(&info->slock, flags);
-		cnow = info->icount;	/* note the counters on entry */
-		spin_unlock_irqrestore(&info->slock, flags);
-
-		return wait_event_interruptible(info->port.delta_msr_wait,
-				mxser_cflags_changed(info, arg, &cnow));
-	case MOXA_HighSpeedOn:
-		return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp);
-	case MOXA_SDS_RSTICOUNTER:
-		spin_lock_irq(&info->slock);
-		info->mon_data.rxcnt = 0;
-		info->mon_data.txcnt = 0;
-		spin_unlock_irq(&info->slock);
-		return 0;
-
-	case MOXA_ASPP_OQUEUE:{
-		int len, lsr;
-
-		len = mxser_chars_in_buffer(tty);
-		spin_lock_irq(&info->slock);
-		lsr = inb(info->ioaddr + UART_LSR) & UART_LSR_THRE;
-		spin_unlock_irq(&info->slock);
-		len += (lsr ? 0 : 1);
-
-		return put_user(len, (int __user *)argp);
-	}
-	case MOXA_ASPP_MON: {
-		int mcr, status;
-
-		spin_lock_irq(&info->slock);
-		status = mxser_get_msr(info->ioaddr, 1, tty->index);
-		mxser_check_modem_status(tty, info, status);
-
-		mcr = inb(info->ioaddr + UART_MCR);
-		spin_unlock_irq(&info->slock);
-
-		if (mcr & MOXA_MUST_MCR_XON_FLAG)
-			info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFHOLD;
-		else
-			info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFHOLD;
-
-		if (mcr & MOXA_MUST_MCR_TX_XON)
-			info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFXENT;
-		else
-			info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFXENT;
-
-		if (tty->hw_stopped)
-			info->mon_data.hold_reason |= NPPI_NOTIFY_CTSHOLD;
-		else
-			info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD;
-
-		if (copy_to_user(argp, &info->mon_data,
-				sizeof(struct mxser_mon)))
-			return -EFAULT;
-
-		return 0;
-	}
-	case MOXA_ASPP_LSTATUS: {
-		if (put_user(info->err_shadow, (unsigned char __user *)argp))
-			return -EFAULT;
-
-		info->err_shadow = 0;
-		return 0;
-	}
-	case MOXA_SET_BAUD_METHOD: {
-		int method;
-
-		if (get_user(method, (int __user *)argp))
-			return -EFAULT;
-		mxser_set_baud_method[tty->index] = method;
-		return put_user(method, (int __user *)argp);
-	}
-	default:
-		return -ENOIOCTLCMD;
-	}
-	return 0;
-}
-
-	/*
-	 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
-	 * Return: write counters to the user passed counter struct
-	 * NB: both 1->0 and 0->1 transitions are counted except for
-	 *     RI where only 0->1 is counted.
-	 */
-
-static int mxser_get_icount(struct tty_struct *tty,
-		struct serial_icounter_struct *icount)
-
-{
-	struct mxser_port *info = tty->driver_data;
-	struct async_icount cnow;
-	unsigned long flags;
-
-	spin_lock_irqsave(&info->slock, flags);
-	cnow = info->icount;
-	spin_unlock_irqrestore(&info->slock, flags);
-
-	icount->frame = cnow.frame;
-	icount->brk = cnow.brk;
-	icount->overrun = cnow.overrun;
-	icount->buf_overrun = cnow.buf_overrun;
-	icount->parity = cnow.parity;
-	icount->rx = cnow.rx;
-	icount->tx = cnow.tx;
-	icount->cts = cnow.cts;
-	icount->dsr = cnow.dsr;
-	icount->rng = cnow.rng;
-	icount->dcd = cnow.dcd;
-	return 0;
-}
-
-static void mxser_stoprx(struct tty_struct *tty)
-{
-	struct mxser_port *info = tty->driver_data;
-
-	info->ldisc_stop_rx = 1;
-	if (I_IXOFF(tty)) {
-		if (info->board->chip_flag) {
-			info->IER &= ~MOXA_MUST_RECV_ISR;
-			outb(info->IER, info->ioaddr + UART_IER);
-		} else {
-			info->x_char = STOP_CHAR(tty);
-			outb(0, info->ioaddr + UART_IER);
-			info->IER |= UART_IER_THRI;
-			outb(info->IER, info->ioaddr + UART_IER);
-		}
-	}
-
-	if (tty->termios->c_cflag & CRTSCTS) {
-		info->MCR &= ~UART_MCR_RTS;
-		outb(info->MCR, info->ioaddr + UART_MCR);
-	}
-}
-
-/*
- * This routine is called by the upper-layer tty layer to signal that
- * incoming characters should be throttled.
- */
-static void mxser_throttle(struct tty_struct *tty)
-{
-	mxser_stoprx(tty);
-}
-
-static void mxser_unthrottle(struct tty_struct *tty)
-{
-	struct mxser_port *info = tty->driver_data;
-
-	/* startrx */
-	info->ldisc_stop_rx = 0;
-	if (I_IXOFF(tty)) {
-		if (info->x_char)
-			info->x_char = 0;
-		else {
-			if (info->board->chip_flag) {
-				info->IER |= MOXA_MUST_RECV_ISR;
-				outb(info->IER, info->ioaddr + UART_IER);
-			} else {
-				info->x_char = START_CHAR(tty);
-				outb(0, info->ioaddr + UART_IER);
-				info->IER |= UART_IER_THRI;
-				outb(info->IER, info->ioaddr + UART_IER);
-			}
-		}
-	}
-
-	if (tty->termios->c_cflag & CRTSCTS) {
-		info->MCR |= UART_MCR_RTS;
-		outb(info->MCR, info->ioaddr + UART_MCR);
-	}
-}
-
-/*
- * mxser_stop() and mxser_start()
- *
- * This routines are called before setting or resetting tty->stopped.
- * They enable or disable transmitter interrupts, as necessary.
- */
-static void mxser_stop(struct tty_struct *tty)
-{
-	struct mxser_port *info = tty->driver_data;
-	unsigned long flags;
-
-	spin_lock_irqsave(&info->slock, flags);
-	if (info->IER & UART_IER_THRI) {
-		info->IER &= ~UART_IER_THRI;
-		outb(info->IER, info->ioaddr + UART_IER);
-	}
-	spin_unlock_irqrestore(&info->slock, flags);
-}
-
-static void mxser_start(struct tty_struct *tty)
-{
-	struct mxser_port *info = tty->driver_data;
-	unsigned long flags;
-
-	spin_lock_irqsave(&info->slock, flags);
-	if (info->xmit_cnt && info->port.xmit_buf) {
-		outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER);
-		info->IER |= UART_IER_THRI;
-		outb(info->IER, info->ioaddr + UART_IER);
-	}
-	spin_unlock_irqrestore(&info->slock, flags);
-}
-
-static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
-{
-	struct mxser_port *info = tty->driver_data;
-	unsigned long flags;
-
-	spin_lock_irqsave(&info->slock, flags);
-	mxser_change_speed(tty, old_termios);
-	spin_unlock_irqrestore(&info->slock, flags);
-
-	if ((old_termios->c_cflag & CRTSCTS) &&
-			!(tty->termios->c_cflag & CRTSCTS)) {
-		tty->hw_stopped = 0;
-		mxser_start(tty);
-	}
-
-	/* Handle sw stopped */
-	if ((old_termios->c_iflag & IXON) &&
-			!(tty->termios->c_iflag & IXON)) {
-		tty->stopped = 0;
-
-		if (info->board->chip_flag) {
-			spin_lock_irqsave(&info->slock, flags);
-			mxser_disable_must_rx_software_flow_control(
-					info->ioaddr);
-			spin_unlock_irqrestore(&info->slock, flags);
-		}
-
-		mxser_start(tty);
-	}
-}
-
-/*
- * mxser_wait_until_sent() --- wait until the transmitter is empty
- */
-static void mxser_wait_until_sent(struct tty_struct *tty, int timeout)
-{
-	struct mxser_port *info = tty->driver_data;
-	unsigned long orig_jiffies, char_time;
-	unsigned long flags;
-	int lsr;
-
-	if (info->type == PORT_UNKNOWN)
-		return;
-
-	if (info->xmit_fifo_size == 0)
-		return;		/* Just in case.... */
-
-	orig_jiffies = jiffies;
-	/*
-	 * Set the check interval to be 1/5 of the estimated time to
-	 * send a single character, and make it at least 1.  The check
-	 * interval should also be less than the timeout.
-	 *
-	 * Note: we have to use pretty tight timings here to satisfy
-	 * the NIST-PCTS.
-	 */
-	char_time = (info->timeout - HZ / 50) / info->xmit_fifo_size;
-	char_time = char_time / 5;
-	if (char_time == 0)
-		char_time = 1;
-	if (timeout && timeout < char_time)
-		char_time = timeout;
-	/*
-	 * If the transmitter hasn't cleared in twice the approximate
-	 * amount of time to send the entire FIFO, it probably won't
-	 * ever clear.  This assumes the UART isn't doing flow
-	 * control, which is currently the case.  Hence, if it ever
-	 * takes longer than info->timeout, this is probably due to a
-	 * UART bug of some kind.  So, we clamp the timeout parameter at
-	 * 2*info->timeout.
-	 */
-	if (!timeout || timeout > 2 * info->timeout)
-		timeout = 2 * info->timeout;
-#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
-	printk(KERN_DEBUG "In rs_wait_until_sent(%d) check=%lu...",
-		timeout, char_time);
-	printk("jiff=%lu...", jiffies);
-#endif
-	spin_lock_irqsave(&info->slock, flags);
-	while (!((lsr = inb(info->ioaddr + UART_LSR)) & UART_LSR_TEMT)) {
-#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
-		printk("lsr = %d (jiff=%lu)...", lsr, jiffies);
-#endif
-		spin_unlock_irqrestore(&info->slock, flags);
-		schedule_timeout_interruptible(char_time);
-		spin_lock_irqsave(&info->slock, flags);
-		if (signal_pending(current))
-			break;
-		if (timeout && time_after(jiffies, orig_jiffies + timeout))
-			break;
-	}
-	spin_unlock_irqrestore(&info->slock, flags);
-	set_current_state(TASK_RUNNING);
-
-#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
-	printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
-#endif
-}
-
-/*
- * This routine is called by tty_hangup() when a hangup is signaled.
- */
-static void mxser_hangup(struct tty_struct *tty)
-{
-	struct mxser_port *info = tty->driver_data;
-
-	mxser_flush_buffer(tty);
-	tty_port_hangup(&info->port);
-}
-
-/*
- * mxser_rs_break() --- routine which turns the break handling on or off
- */
-static int mxser_rs_break(struct tty_struct *tty, int break_state)
-{
-	struct mxser_port *info = tty->driver_data;
-	unsigned long flags;
-
-	spin_lock_irqsave(&info->slock, flags);
-	if (break_state == -1)
-		outb(inb(info->ioaddr + UART_LCR) | UART_LCR_SBC,
-			info->ioaddr + UART_LCR);
-	else
-		outb(inb(info->ioaddr + UART_LCR) & ~UART_LCR_SBC,
-			info->ioaddr + UART_LCR);
-	spin_unlock_irqrestore(&info->slock, flags);
-	return 0;
-}
-
-static void mxser_receive_chars(struct tty_struct *tty,
-				struct mxser_port *port, int *status)
-{
-	unsigned char ch, gdl;
-	int ignored = 0;
-	int cnt = 0;
-	int recv_room;
-	int max = 256;
-
-	recv_room = tty->receive_room;
-	if (recv_room == 0 && !port->ldisc_stop_rx)
-		mxser_stoprx(tty);
-	if (port->board->chip_flag != MOXA_OTHER_UART) {
-
-		if (*status & UART_LSR_SPECIAL)
-			goto intr_old;
-		if (port->board->chip_flag == MOXA_MUST_MU860_HWID &&
-				(*status & MOXA_MUST_LSR_RERR))
-			goto intr_old;
-		if (*status & MOXA_MUST_LSR_RERR)
-			goto intr_old;
-
-		gdl = inb(port->ioaddr + MOXA_MUST_GDL_REGISTER);
-
-		if (port->board->chip_flag == MOXA_MUST_MU150_HWID)
-			gdl &= MOXA_MUST_GDL_MASK;
-		if (gdl >= recv_room) {
-			if (!port->ldisc_stop_rx)
-				mxser_stoprx(tty);
-		}
-		while (gdl--) {
-			ch = inb(port->ioaddr + UART_RX);
-			tty_insert_flip_char(tty, ch, 0);
-			cnt++;
-		}
-		goto end_intr;
-	}
-intr_old:
-
-	do {
-		if (max-- < 0)
-			break;
-
-		ch = inb(port->ioaddr + UART_RX);
-		if (port->board->chip_flag && (*status & UART_LSR_OE))
-			outb(0x23, port->ioaddr + UART_FCR);
-		*status &= port->read_status_mask;
-		if (*status & port->ignore_status_mask) {
-			if (++ignored > 100)
-				break;
-		} else {
-			char flag = 0;
-			if (*status & UART_LSR_SPECIAL) {
-				if (*status & UART_LSR_BI) {
-					flag = TTY_BREAK;
-					port->icount.brk++;
-
-					if (port->port.flags & ASYNC_SAK)
-						do_SAK(tty);
-				} else if (*status & UART_LSR_PE) {
-					flag = TTY_PARITY;
-					port->icount.parity++;
-				} else if (*status & UART_LSR_FE) {
-					flag = TTY_FRAME;
-					port->icount.frame++;
-				} else if (*status & UART_LSR_OE) {
-					flag = TTY_OVERRUN;
-					port->icount.overrun++;
-				} else
-					flag = TTY_BREAK;
-			}
-			tty_insert_flip_char(tty, ch, flag);
-			cnt++;
-			if (cnt >= recv_room) {
-				if (!port->ldisc_stop_rx)
-					mxser_stoprx(tty);
-				break;
-			}
-
-		}
-
-		if (port->board->chip_flag)
-			break;
-
-		*status = inb(port->ioaddr + UART_LSR);
-	} while (*status & UART_LSR_DR);
-
-end_intr:
-	mxvar_log.rxcnt[tty->index] += cnt;
-	port->mon_data.rxcnt += cnt;
-	port->mon_data.up_rxcnt += cnt;
-
-	/*
-	 * We are called from an interrupt context with &port->slock
-	 * being held. Drop it temporarily in order to prevent
-	 * recursive locking.
-	 */
-	spin_unlock(&port->slock);
-	tty_flip_buffer_push(tty);
-	spin_lock(&port->slock);
-}
-
-static void mxser_transmit_chars(struct tty_struct *tty, struct mxser_port *port)
-{
-	int count, cnt;
-
-	if (port->x_char) {
-		outb(port->x_char, port->ioaddr + UART_TX);
-		port->x_char = 0;
-		mxvar_log.txcnt[tty->index]++;
-		port->mon_data.txcnt++;
-		port->mon_data.up_txcnt++;
-		port->icount.tx++;
-		return;
-	}
-
-	if (port->port.xmit_buf == NULL)
-		return;
-
-	if (port->xmit_cnt <= 0 || tty->stopped ||
-			(tty->hw_stopped &&
-			(port->type != PORT_16550A) &&
-			(!port->board->chip_flag))) {
-		port->IER &= ~UART_IER_THRI;
-		outb(port->IER, port->ioaddr + UART_IER);
-		return;
-	}
-
-	cnt = port->xmit_cnt;
-	count = port->xmit_fifo_size;
-	do {
-		outb(port->port.xmit_buf[port->xmit_tail++],
-			port->ioaddr + UART_TX);
-		port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE - 1);
-		if (--port->xmit_cnt <= 0)
-			break;
-	} while (--count > 0);
-	mxvar_log.txcnt[tty->index] += (cnt - port->xmit_cnt);
-
-	port->mon_data.txcnt += (cnt - port->xmit_cnt);
-	port->mon_data.up_txcnt += (cnt - port->xmit_cnt);
-	port->icount.tx += (cnt - port->xmit_cnt);
-
-	if (port->xmit_cnt < WAKEUP_CHARS)
-		tty_wakeup(tty);
-
-	if (port->xmit_cnt <= 0) {
-		port->IER &= ~UART_IER_THRI;
-		outb(port->IER, port->ioaddr + UART_IER);
-	}
-}
-
-/*
- * This is the serial driver's generic interrupt routine
- */
-static irqreturn_t mxser_interrupt(int irq, void *dev_id)
-{
-	int status, iir, i;
-	struct mxser_board *brd = NULL;
-	struct mxser_port *port;
-	int max, irqbits, bits, msr;
-	unsigned int int_cnt, pass_counter = 0;
-	int handled = IRQ_NONE;
-	struct tty_struct *tty;
-
-	for (i = 0; i < MXSER_BOARDS; i++)
-		if (dev_id == &mxser_boards[i]) {
-			brd = dev_id;
-			break;
-		}
-
-	if (i == MXSER_BOARDS)
-		goto irq_stop;
-	if (brd == NULL)
-		goto irq_stop;
-	max = brd->info->nports;
-	while (pass_counter++ < MXSER_ISR_PASS_LIMIT) {
-		irqbits = inb(brd->vector) & brd->vector_mask;
-		if (irqbits == brd->vector_mask)
-			break;
-
-		handled = IRQ_HANDLED;
-		for (i = 0, bits = 1; i < max; i++, irqbits |= bits, bits <<= 1) {
-			if (irqbits == brd->vector_mask)
-				break;
-			if (bits & irqbits)
-				continue;
-			port = &brd->ports[i];
-
-			int_cnt = 0;
-			spin_lock(&port->slock);
-			do {
-				iir = inb(port->ioaddr + UART_IIR);
-				if (iir & UART_IIR_NO_INT)
-					break;
-				iir &= MOXA_MUST_IIR_MASK;
-				tty = tty_port_tty_get(&port->port);
-				if (!tty ||
-						(port->port.flags & ASYNC_CLOSING) ||
-						!(port->port.flags &
-							ASYNC_INITIALIZED)) {
-					status = inb(port->ioaddr + UART_LSR);
-					outb(0x27, port->ioaddr + UART_FCR);
-					inb(port->ioaddr + UART_MSR);
-					tty_kref_put(tty);
-					break;
-				}
-
-				status = inb(port->ioaddr + UART_LSR);
-
-				if (status & UART_LSR_PE)
-					port->err_shadow |= NPPI_NOTIFY_PARITY;
-				if (status & UART_LSR_FE)
-					port->err_shadow |= NPPI_NOTIFY_FRAMING;
-				if (status & UART_LSR_OE)
-					port->err_shadow |=
-						NPPI_NOTIFY_HW_OVERRUN;
-				if (status & UART_LSR_BI)
-					port->err_shadow |= NPPI_NOTIFY_BREAK;
-
-				if (port->board->chip_flag) {
-					if (iir == MOXA_MUST_IIR_GDA ||
-					    iir == MOXA_MUST_IIR_RDA ||
-					    iir == MOXA_MUST_IIR_RTO ||
-					    iir == MOXA_MUST_IIR_LSR)
-						mxser_receive_chars(tty, port,
-								&status);
-
-				} else {
-					status &= port->read_status_mask;
-					if (status & UART_LSR_DR)
-						mxser_receive_chars(tty, port,
-								&status);
-				}
-				msr = inb(port->ioaddr + UART_MSR);
-				if (msr & UART_MSR_ANY_DELTA)
-					mxser_check_modem_status(tty, port, msr);
-
-				if (port->board->chip_flag) {
-					if (iir == 0x02 && (status &
-								UART_LSR_THRE))
-						mxser_transmit_chars(tty, port);
-				} else {
-					if (status & UART_LSR_THRE)
-						mxser_transmit_chars(tty, port);
-				}
-				tty_kref_put(tty);
-			} while (int_cnt++ < MXSER_ISR_PASS_LIMIT);
-			spin_unlock(&port->slock);
-		}
-	}
-
-irq_stop:
-	return handled;
-}
-
-static const struct tty_operations mxser_ops = {
-	.open = mxser_open,
-	.close = mxser_close,
-	.write = mxser_write,
-	.put_char = mxser_put_char,
-	.flush_chars = mxser_flush_chars,
-	.write_room = mxser_write_room,
-	.chars_in_buffer = mxser_chars_in_buffer,
-	.flush_buffer = mxser_flush_buffer,
-	.ioctl = mxser_ioctl,
-	.throttle = mxser_throttle,
-	.unthrottle = mxser_unthrottle,
-	.set_termios = mxser_set_termios,
-	.stop = mxser_stop,
-	.start = mxser_start,
-	.hangup = mxser_hangup,
-	.break_ctl = mxser_rs_break,
-	.wait_until_sent = mxser_wait_until_sent,
-	.tiocmget = mxser_tiocmget,
-	.tiocmset = mxser_tiocmset,
-	.get_icount = mxser_get_icount,
-};
-
-struct tty_port_operations mxser_port_ops = {
-	.carrier_raised = mxser_carrier_raised,
-	.dtr_rts = mxser_dtr_rts,
-	.activate = mxser_activate,
-	.shutdown = mxser_shutdown_port,
-};
-
-/*
- * The MOXA Smartio/Industio serial driver boot-time initialization code!
- */
-
-static void mxser_release_ISA_res(struct mxser_board *brd)
-{
-	free_irq(brd->irq, brd);
-	release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
-	release_region(brd->vector, 1);
-}
-
-static int __devinit mxser_initbrd(struct mxser_board *brd,
-		struct pci_dev *pdev)
-{
-	struct mxser_port *info;
-	unsigned int i;
-	int retval;
-
-	printk(KERN_INFO "mxser: max. baud rate = %d bps\n",
-			brd->ports[0].max_baud);
-
-	for (i = 0; i < brd->info->nports; i++) {
-		info = &brd->ports[i];
-		tty_port_init(&info->port);
-		info->port.ops = &mxser_port_ops;
-		info->board = brd;
-		info->stop_rx = 0;
-		info->ldisc_stop_rx = 0;
-
-		/* Enhance mode enabled here */
-		if (brd->chip_flag != MOXA_OTHER_UART)
-			mxser_enable_must_enchance_mode(info->ioaddr);
-
-		info->port.flags = ASYNC_SHARE_IRQ;
-		info->type = brd->uart_type;
-
-		process_txrx_fifo(info);
-
-		info->custom_divisor = info->baud_base * 16;
-		info->port.close_delay = 5 * HZ / 10;
-		info->port.closing_wait = 30 * HZ;
-		info->normal_termios = mxvar_sdriver->init_termios;
-		memset(&info->mon_data, 0, sizeof(struct mxser_mon));
-		info->err_shadow = 0;
-		spin_lock_init(&info->slock);
-
-		/* before set INT ISR, disable all int */
-		outb(inb(info->ioaddr + UART_IER) & 0xf0,
-			info->ioaddr + UART_IER);
-	}
-
-	retval = request_irq(brd->irq, mxser_interrupt, IRQF_SHARED, "mxser",
-			brd);
-	if (retval)
-		printk(KERN_ERR "Board %s: Request irq failed, IRQ (%d) may "
-			"conflict with another device.\n",
-			brd->info->name, brd->irq);
-
-	return retval;
-}
-
-static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd)
-{
-	int id, i, bits;
-	unsigned short regs[16], irq;
-	unsigned char scratch, scratch2;
-
-	brd->chip_flag = MOXA_OTHER_UART;
-
-	id = mxser_read_register(cap, regs);
-	switch (id) {
-	case C168_ASIC_ID:
-		brd->info = &mxser_cards[0];
-		break;
-	case C104_ASIC_ID:
-		brd->info = &mxser_cards[1];
-		break;
-	case CI104J_ASIC_ID:
-		brd->info = &mxser_cards[2];
-		break;
-	case C102_ASIC_ID:
-		brd->info = &mxser_cards[5];
-		break;
-	case CI132_ASIC_ID:
-		brd->info = &mxser_cards[6];
-		break;
-	case CI134_ASIC_ID:
-		brd->info = &mxser_cards[7];
-		break;
-	default:
-		return 0;
-	}
-
-	irq = 0;
-	/* some ISA cards have 2 ports, but we want to see them as 4-port (why?)
-	   Flag-hack checks if configuration should be read as 2-port here. */
-	if (brd->info->nports == 2 || (brd->info->flags & MXSER_HAS2)) {
-		irq = regs[9] & 0xF000;
-		irq = irq | (irq >> 4);
-		if (irq != (regs[9] & 0xFF00))
-			goto err_irqconflict;
-	} else if (brd->info->nports == 4) {
-		irq = regs[9] & 0xF000;
-		irq = irq | (irq >> 4);
-		irq = irq | (irq >> 8);
-		if (irq != regs[9])
-			goto err_irqconflict;
-	} else if (brd->info->nports == 8) {
-		irq = regs[9] & 0xF000;
-		irq = irq | (irq >> 4);
-		irq = irq | (irq >> 8);
-		if ((irq != regs[9]) || (irq != regs[10]))
-			goto err_irqconflict;
-	}
-
-	if (!irq) {
-		printk(KERN_ERR "mxser: interrupt number unset\n");
-		return -EIO;
-	}
-	brd->irq = ((int)(irq & 0xF000) >> 12);
-	for (i = 0; i < 8; i++)
-		brd->ports[i].ioaddr = (int) regs[i + 1] & 0xFFF8;
-	if ((regs[12] & 0x80) == 0) {
-		printk(KERN_ERR "mxser: invalid interrupt vector\n");
-		return -EIO;
-	}
-	brd->vector = (int)regs[11];	/* interrupt vector */
-	if (id == 1)
-		brd->vector_mask = 0x00FF;
-	else
-		brd->vector_mask = 0x000F;
-	for (i = 7, bits = 0x0100; i >= 0; i--, bits <<= 1) {
-		if (regs[12] & bits) {
-			brd->ports[i].baud_base = 921600;
-			brd->ports[i].max_baud = 921600;
-		} else {
-			brd->ports[i].baud_base = 115200;
-			brd->ports[i].max_baud = 115200;
-		}
-	}
-	scratch2 = inb(cap + UART_LCR) & (~UART_LCR_DLAB);
-	outb(scratch2 | UART_LCR_DLAB, cap + UART_LCR);
-	outb(0, cap + UART_EFR);	/* EFR is the same as FCR */
-	outb(scratch2, cap + UART_LCR);
-	outb(UART_FCR_ENABLE_FIFO, cap + UART_FCR);
-	scratch = inb(cap + UART_IIR);
-
-	if (scratch & 0xC0)
-		brd->uart_type = PORT_16550A;
-	else
-		brd->uart_type = PORT_16450;
-	if (!request_region(brd->ports[0].ioaddr, 8 * brd->info->nports,
-			"mxser(IO)")) {
-		printk(KERN_ERR "mxser: can't request ports I/O region: "
-				"0x%.8lx-0x%.8lx\n",
-				brd->ports[0].ioaddr, brd->ports[0].ioaddr +
-				8 * brd->info->nports - 1);
-		return -EIO;
-	}
-	if (!request_region(brd->vector, 1, "mxser(vector)")) {
-		release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
-		printk(KERN_ERR "mxser: can't request interrupt vector region: "
-				"0x%.8lx-0x%.8lx\n",
-				brd->ports[0].ioaddr, brd->ports[0].ioaddr +
-				8 * brd->info->nports - 1);
-		return -EIO;
-	}
-	return brd->info->nports;
-
-err_irqconflict:
-	printk(KERN_ERR "mxser: invalid interrupt number\n");
-	return -EIO;
-}
-
-static int __devinit mxser_probe(struct pci_dev *pdev,
-		const struct pci_device_id *ent)
-{
-#ifdef CONFIG_PCI
-	struct mxser_board *brd;
-	unsigned int i, j;
-	unsigned long ioaddress;
-	int retval = -EINVAL;
-
-	for (i = 0; i < MXSER_BOARDS; i++)
-		if (mxser_boards[i].info == NULL)
-			break;
-
-	if (i >= MXSER_BOARDS) {
-		dev_err(&pdev->dev, "too many boards found (maximum %d), board "
-				"not configured\n", MXSER_BOARDS);
-		goto err;
-	}
-
-	brd = &mxser_boards[i];
-	brd->idx = i * MXSER_PORTS_PER_BOARD;
-	dev_info(&pdev->dev, "found MOXA %s board (BusNo=%d, DevNo=%d)\n",
-		mxser_cards[ent->driver_data].name,
-		pdev->bus->number, PCI_SLOT(pdev->devfn));
-
-	retval = pci_enable_device(pdev);
-	if (retval) {
-		dev_err(&pdev->dev, "PCI enable failed\n");
-		goto err;
-	}
-
-	/* io address */
-	ioaddress = pci_resource_start(pdev, 2);
-	retval = pci_request_region(pdev, 2, "mxser(IO)");
-	if (retval)
-		goto err_dis;
-
-	brd->info = &mxser_cards[ent->driver_data];
-	for (i = 0; i < brd->info->nports; i++)
-		brd->ports[i].ioaddr = ioaddress + 8 * i;
-
-	/* vector */
-	ioaddress = pci_resource_start(pdev, 3);
-	retval = pci_request_region(pdev, 3, "mxser(vector)");
-	if (retval)
-		goto err_zero;
-	brd->vector = ioaddress;
-
-	/* irq */
-	brd->irq = pdev->irq;
-
-	brd->chip_flag = CheckIsMoxaMust(brd->ports[0].ioaddr);
-	brd->uart_type = PORT_16550A;
-	brd->vector_mask = 0;
-
-	for (i = 0; i < brd->info->nports; i++) {
-		for (j = 0; j < UART_INFO_NUM; j++) {
-			if (Gpci_uart_info[j].type == brd->chip_flag) {
-				brd->ports[i].max_baud =
-					Gpci_uart_info[j].max_baud;
-
-				/* exception....CP-102 */
-				if (brd->info->flags & MXSER_HIGHBAUD)
-					brd->ports[i].max_baud = 921600;
-				break;
-			}
-		}
-	}
-
-	if (brd->chip_flag == MOXA_MUST_MU860_HWID) {
-		for (i = 0; i < brd->info->nports; i++) {
-			if (i < 4)
-				brd->ports[i].opmode_ioaddr = ioaddress + 4;
-			else
-				brd->ports[i].opmode_ioaddr = ioaddress + 0x0c;
-		}
-		outb(0, ioaddress + 4);	/* default set to RS232 mode */
-		outb(0, ioaddress + 0x0c);	/* default set to RS232 mode */
-	}
-
-	for (i = 0; i < brd->info->nports; i++) {
-		brd->vector_mask |= (1 << i);
-		brd->ports[i].baud_base = 921600;
-	}
-
-	/* mxser_initbrd will hook ISR. */
-	retval = mxser_initbrd(brd, pdev);
-	if (retval)
-		goto err_rel3;
-
-	for (i = 0; i < brd->info->nports; i++)
-		tty_register_device(mxvar_sdriver, brd->idx + i, &pdev->dev);
-
-	pci_set_drvdata(pdev, brd);
-
-	return 0;
-err_rel3:
-	pci_release_region(pdev, 3);
-err_zero:
-	brd->info = NULL;
-	pci_release_region(pdev, 2);
-err_dis:
-	pci_disable_device(pdev);
-err:
-	return retval;
-#else
-	return -ENODEV;
-#endif
-}
-
-static void __devexit mxser_remove(struct pci_dev *pdev)
-{
-#ifdef CONFIG_PCI
-	struct mxser_board *brd = pci_get_drvdata(pdev);
-	unsigned int i;
-
-	for (i = 0; i < brd->info->nports; i++)
-		tty_unregister_device(mxvar_sdriver, brd->idx + i);
-
-	free_irq(pdev->irq, brd);
-	pci_release_region(pdev, 2);
-	pci_release_region(pdev, 3);
-	pci_disable_device(pdev);
-	brd->info = NULL;
-#endif
-}
-
-static struct pci_driver mxser_driver = {
-	.name = "mxser",
-	.id_table = mxser_pcibrds,
-	.probe = mxser_probe,
-	.remove = __devexit_p(mxser_remove)
-};
-
-static int __init mxser_module_init(void)
-{
-	struct mxser_board *brd;
-	unsigned int b, i, m;
-	int retval;
-
-	mxvar_sdriver = alloc_tty_driver(MXSER_PORTS + 1);
-	if (!mxvar_sdriver)
-		return -ENOMEM;
-
-	printk(KERN_INFO "MOXA Smartio/Industio family driver version %s\n",
-		MXSER_VERSION);
-
-	/* Initialize the tty_driver structure */
-	mxvar_sdriver->owner = THIS_MODULE;
-	mxvar_sdriver->magic = TTY_DRIVER_MAGIC;
-	mxvar_sdriver->name = "ttyMI";
-	mxvar_sdriver->major = ttymajor;
-	mxvar_sdriver->minor_start = 0;
-	mxvar_sdriver->num = MXSER_PORTS + 1;
-	mxvar_sdriver->type = TTY_DRIVER_TYPE_SERIAL;
-	mxvar_sdriver->subtype = SERIAL_TYPE_NORMAL;
-	mxvar_sdriver->init_termios = tty_std_termios;
-	mxvar_sdriver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL;
-	mxvar_sdriver->flags = TTY_DRIVER_REAL_RAW|TTY_DRIVER_DYNAMIC_DEV;
-	tty_set_operations(mxvar_sdriver, &mxser_ops);
-
-	retval = tty_register_driver(mxvar_sdriver);
-	if (retval) {
-		printk(KERN_ERR "Couldn't install MOXA Smartio/Industio family "
-				"tty driver !\n");
-		goto err_put;
-	}
-
-	/* Start finding ISA boards here */
-	for (m = 0, b = 0; b < MXSER_BOARDS; b++) {
-		if (!ioaddr[b])
-			continue;
-
-		brd = &mxser_boards[m];
-		retval = mxser_get_ISA_conf(ioaddr[b], brd);
-		if (retval <= 0) {
-			brd->info = NULL;
-			continue;
-		}
-
-		printk(KERN_INFO "mxser: found MOXA %s board (CAP=0x%lx)\n",
-				brd->info->name, ioaddr[b]);
-
-		/* mxser_initbrd will hook ISR. */
-		if (mxser_initbrd(brd, NULL) < 0) {
-			brd->info = NULL;
-			continue;
-		}
-
-		brd->idx = m * MXSER_PORTS_PER_BOARD;
-		for (i = 0; i < brd->info->nports; i++)
-			tty_register_device(mxvar_sdriver, brd->idx + i, NULL);
-
-		m++;
-	}
-
-	retval = pci_register_driver(&mxser_driver);
-	if (retval) {
-		printk(KERN_ERR "mxser: can't register pci driver\n");
-		if (!m) {
-			retval = -ENODEV;
-			goto err_unr;
-		} /* else: we have some ISA cards under control */
-	}
-
-	return 0;
-err_unr:
-	tty_unregister_driver(mxvar_sdriver);
-err_put:
-	put_tty_driver(mxvar_sdriver);
-	return retval;
-}
-
-static void __exit mxser_module_exit(void)
-{
-	unsigned int i, j;
-
-	pci_unregister_driver(&mxser_driver);
-
-	for (i = 0; i < MXSER_BOARDS; i++) /* ISA remains */
-		if (mxser_boards[i].info != NULL)
-			for (j = 0; j < mxser_boards[i].info->nports; j++)
-				tty_unregister_device(mxvar_sdriver,
-						mxser_boards[i].idx + j);
-	tty_unregister_driver(mxvar_sdriver);
-	put_tty_driver(mxvar_sdriver);
-
-	for (i = 0; i < MXSER_BOARDS; i++)
-		if (mxser_boards[i].info != NULL)
-			mxser_release_ISA_res(&mxser_boards[i]);
-}
-
-module_init(mxser_module_init);
-module_exit(mxser_module_exit);