[PATCH] lindent rio drivers

Run all rio files through indent -kr -i8 -bri0 -l255, as requested by Alan.

rioboot.c and rioinit.c were skipped due to worrisome lindent warnings.

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 137 insertions, 148 deletions

diff --git a/drivers/char/rio/phb.h b/drivers/char/rio/phb.h
index e1483a0e30bd..3baebf8513af 100644
--- a/drivers/char/rio/phb.h
+++ b/drivers/char/rio/phb.h
@@ -58,37 +58,37 @@
 /*************************************************
  * Handshake asserted. Deasserted by the LTT(s)
  ************************************************/
-#define PHB_HANDSHAKE_SET      ((ushort) 0x001) /* Set by LRT */
+#define PHB_HANDSHAKE_SET      ((ushort) 0x001)	/* Set by LRT */
 
-#define PHB_HANDSHAKE_RESET     ((ushort) 0x002) /* Set by ISR / driver */
+#define PHB_HANDSHAKE_RESET     ((ushort) 0x002)	/* Set by ISR / driver */
 
 #define PHB_HANDSHAKE_FLAGS     (PHB_HANDSHAKE_RESET | PHB_HANDSHAKE_SET)
-                                                /* Reset by ltt */
+						/* Reset by ltt */
 
 
 /*************************************************
  * Maximum number of PHB's
  ************************************************/
 #if defined (HOST) || defined (INKERNEL)
-#define MAX_PHB               ((ushort) 128)  /* range 0-127 */
+#define MAX_PHB               ((ushort) 128)	/* range 0-127 */
 #else
-#define MAX_PHB               ((ushort) 8)    /* range 0-7 */
+#define MAX_PHB               ((ushort) 8)	/* range 0-7 */
 #endif
 
 /*************************************************
  * Defines for the mode fields
  ************************************************/
-#define TXPKT_INCOMPLETE        0x0001  /* Previous tx packet not completed */
-#define TXINTR_ENABLED          0x0002  /* Tx interrupt is enabled */
-#define TX_TAB3                 0x0004  /* TAB3 mode */
-#define TX_OCRNL                0x0008  /* OCRNL mode */
-#define TX_ONLCR                0x0010  /* ONLCR mode */
-#define TX_SENDSPACES           0x0020  /* Send n spaces command needs 
-                                           completing */
-#define TX_SENDNULL             0x0040  /* Escaping NULL needs completing */
-#define TX_SENDLF               0x0080  /* LF -> CR LF needs completing */
-#define TX_PARALLELBUG          0x0100  /* CD1400 LF -> CR LF bug on parallel
-                                           port */
+#define TXPKT_INCOMPLETE        0x0001	/* Previous tx packet not completed */
+#define TXINTR_ENABLED          0x0002	/* Tx interrupt is enabled */
+#define TX_TAB3                 0x0004	/* TAB3 mode */
+#define TX_OCRNL                0x0008	/* OCRNL mode */
+#define TX_ONLCR                0x0010	/* ONLCR mode */
+#define TX_SENDSPACES           0x0020	/* Send n spaces command needs
+					   completing */
+#define TX_SENDNULL             0x0040	/* Escaping NULL needs completing */
+#define TX_SENDLF               0x0080	/* LF -> CR LF needs completing */
+#define TX_PARALLELBUG          0x0100	/* CD1400 LF -> CR LF bug on parallel
+					   port */
 #define TX_HANGOVER             (TX_SENDSPACES | TX_SENDLF | TX_SENDNULL)
 #define TX_DTRFLOW		0x0200	/* DTR tx flow control */
 #define	TX_DTRFLOWED		0x0400	/* DTR is low - don't allow more data
@@ -96,34 +96,34 @@
 #define	TX_DATAINFIFO		0x0800	/* There is data in the FIFO */
 #define	TX_BUSY			0x1000	/* Data in FIFO, shift or holding regs */
 
-#define RX_SPARE	        0x0001   /* SPARE */
-#define RXINTR_ENABLED          0x0002   /* Rx interrupt enabled */
-#define RX_ICRNL                0x0008   /* ICRNL mode */
-#define RX_INLCR                0x0010   /* INLCR mode */
-#define RX_IGNCR                0x0020   /* IGNCR mode */
-#define RX_CTSFLOW              0x0040   /* CTSFLOW enabled */
-#define RX_IXOFF                0x0080   /* IXOFF enabled */
-#define RX_CTSFLOWED            0x0100   /* CTSFLOW and CTS dropped */
-#define RX_IXOFFED              0x0200   /* IXOFF and xoff sent */
-#define RX_BUFFERED		0x0400	 /* Try and pass on complete packets */
+#define RX_SPARE	        0x0001	/* SPARE */
+#define RXINTR_ENABLED          0x0002	/* Rx interrupt enabled */
+#define RX_ICRNL                0x0008	/* ICRNL mode */
+#define RX_INLCR                0x0010	/* INLCR mode */
+#define RX_IGNCR                0x0020	/* IGNCR mode */
+#define RX_CTSFLOW              0x0040	/* CTSFLOW enabled */
+#define RX_IXOFF                0x0080	/* IXOFF enabled */
+#define RX_CTSFLOWED            0x0100	/* CTSFLOW and CTS dropped */
+#define RX_IXOFFED              0x0200	/* IXOFF and xoff sent */
+#define RX_BUFFERED		0x0400	/* Try and pass on complete packets */
 
-#define PORT_ISOPEN             0x0001  /* Port open? */
-#define PORT_HUPCL              0x0002  /* Hangup on close? */
-#define PORT_MOPENPEND          0x0004  /* Modem open pending */
-#define PORT_ISPARALLEL         0x0008  /* Parallel port */
-#define PORT_BREAK              0x0010  /* Port on break */
-#define PORT_STATUSPEND		0x0020  /* Status packet pending */
-#define PORT_BREAKPEND          0x0040  /* Break packet pending */
-#define PORT_MODEMPEND          0x0080  /* Modem status packet pending */
-#define PORT_PARALLELBUG        0x0100  /* CD1400 LF -> CR LF bug on parallel
-                                           port */
-#define PORT_FULLMODEM          0x0200  /* Full modem signals */
-#define PORT_RJ45               0x0400  /* RJ45 connector - no RI signal */
-#define PORT_RESTRICTED         0x0600  /* Restricted connector - no RI / DTR */
+#define PORT_ISOPEN             0x0001	/* Port open? */
+#define PORT_HUPCL              0x0002	/* Hangup on close? */
+#define PORT_MOPENPEND          0x0004	/* Modem open pending */
+#define PORT_ISPARALLEL         0x0008	/* Parallel port */
+#define PORT_BREAK              0x0010	/* Port on break */
+#define PORT_STATUSPEND		0x0020	/* Status packet pending */
+#define PORT_BREAKPEND          0x0040	/* Break packet pending */
+#define PORT_MODEMPEND          0x0080	/* Modem status packet pending */
+#define PORT_PARALLELBUG        0x0100	/* CD1400 LF -> CR LF bug on parallel
+					   port */
+#define PORT_FULLMODEM          0x0200	/* Full modem signals */
+#define PORT_RJ45               0x0400	/* RJ45 connector - no RI signal */
+#define PORT_RESTRICTED         0x0600	/* Restricted connector - no RI / DTR */
 
-#define PORT_MODEMBITS          0x0600  /* Mask for modem fields */
+#define PORT_MODEMBITS          0x0600	/* Mask for modem fields */
 
-#define PORT_WCLOSE             0x0800  /* Waiting for close */
+#define PORT_WCLOSE             0x0800	/* Waiting for close */
 #define	PORT_HANDSHAKEFIX	0x1000	/* Port has H/W flow control fix */
 #define	PORT_WASPCLOSED		0x2000	/* Port closed with PCLOSE */
 #define	DUMPMODE		0x4000	/* Dump RTA mem */
@@ -155,139 +155,128 @@
 #define rx_end       u4.s1.rx_end_ptr_ptr
 #define rx_remove    u4.s1.rx_remove_ptr_ptr
 #endif
-typedef struct PHB PHB ;
+typedef struct PHB PHB;
 struct PHB {
 #ifdef RTA
-        ushort      port;
+	ushort port;
 #endif
 #ifdef INKERNEL
-        WORD      source;
+	WORD source;
 #else
-        union       
-        {
-            ushort source;              /* Complete source */
-            struct
-            {
-                unsigned char unit;     /* Source unit */
-                unsigned char port;     /* Source port */
-            } s2;
-        } u2;
+	union {
+		ushort source;	/* Complete source */
+		struct {
+			unsigned char unit;	/* Source unit */
+			unsigned char port;	/* Source port */
+		} s2;
+	} u2;
 #endif
-        WORD      handshake ;
-        WORD      status ;
-        NUMBER       timeout ;           /* Maximum of 1.9 seconds */
-        WORD      link ;              /* Send down this link */
+	WORD handshake;
+	WORD status;
+	NUMBER timeout;		/* Maximum of 1.9 seconds */
+	WORD link;		/* Send down this link */
 #ifdef INKERNEL
-        WORD      destination;
+	WORD destination;
 #else
-        union       
-        {
-            ushort destination;         /* Complete destination */
-            struct
-            {
-                unsigned char unit;     /* Destination unit */
-                unsigned char port;     /* Destination port */
-            } s1;
-        } u1;
+	union {
+		ushort destination;	/* Complete destination */
+		struct {
+			unsigned char unit;	/* Destination unit */
+			unsigned char port;	/* Destination port */
+		} s1;
+	} u1;
 #endif
 #ifdef RTA
-        ushort      tx_pkts_added;
-        ushort      tx_pkts_removed;
-        Q_BUF_ptr   tx_q_start ;        /* Start of the Q list chain */
-        short       num_tx_q_bufs ;     /* Number of Q buffers in the chain */
-        PKT_ptr_ptr tx_add ;            /* Add a new Packet here */
-        Q_BUF_ptr   tx_add_qb;          /* Pointer to the add Q buf */
-        PKT_ptr_ptr tx_add_st_qbb ;     /* Pointer to start of the Q's buf */
-        PKT_ptr_ptr tx_add_end_qbb ;    /* Pointer to the end of the Q's buf */
-        PKT_ptr_ptr tx_remove ;         /* Remove a Packet here */
-        Q_BUF_ptr   tx_remove_qb ;      /* Pointer to the remove Q buf */
-        PKT_ptr_ptr tx_remove_st_qbb ;  /* Pointer to the start of the Q buf */
-        PKT_ptr_ptr tx_remove_end_qbb ; /* Pointer to the end of the Q buf */
+	ushort tx_pkts_added;
+	ushort tx_pkts_removed;
+	Q_BUF_ptr tx_q_start;	/* Start of the Q list chain */
+	short num_tx_q_bufs;	/* Number of Q buffers in the chain */
+	PKT_ptr_ptr tx_add;	/* Add a new Packet here */
+	Q_BUF_ptr tx_add_qb;	/* Pointer to the add Q buf */
+	PKT_ptr_ptr tx_add_st_qbb;	/* Pointer to start of the Q's buf */
+	PKT_ptr_ptr tx_add_end_qbb;	/* Pointer to the end of the Q's buf */
+	PKT_ptr_ptr tx_remove;	/* Remove a Packet here */
+	Q_BUF_ptr tx_remove_qb;	/* Pointer to the remove Q buf */
+	PKT_ptr_ptr tx_remove_st_qbb;	/* Pointer to the start of the Q buf */
+	PKT_ptr_ptr tx_remove_end_qbb;	/* Pointer to the end of the Q buf */
 #endif
 #ifdef INKERNEL
-        PKT_ptr_ptr tx_start ;
-        PKT_ptr_ptr tx_end ;
-        PKT_ptr_ptr tx_add ;
-        PKT_ptr_ptr tx_remove ;
+	PKT_ptr_ptr tx_start;
+	PKT_ptr_ptr tx_end;
+	PKT_ptr_ptr tx_add;
+	PKT_ptr_ptr tx_remove;
 #endif
 #ifdef HOST
-        union
-        {
-            struct
-            {
-                PKT_ptr_ptr tx_start_ptr_ptr;
-                PKT_ptr_ptr tx_end_ptr_ptr;
-                PKT_ptr_ptr tx_add_ptr_ptr;
-                PKT_ptr_ptr tx_remove_ptr_ptr;
-            } s1;
-            struct
-            {
-                ushort * tx_start_ptr;
-                ushort * tx_end_ptr;
-                ushort * tx_add_ptr;
-                ushort * tx_remove_ptr;
-            } s2;
-        } u3;
+	union {
+		struct {
+			PKT_ptr_ptr tx_start_ptr_ptr;
+			PKT_ptr_ptr tx_end_ptr_ptr;
+			PKT_ptr_ptr tx_add_ptr_ptr;
+			PKT_ptr_ptr tx_remove_ptr_ptr;
+		} s1;
+		struct {
+			ushort *tx_start_ptr;
+			ushort *tx_end_ptr;
+			ushort *tx_add_ptr;
+			ushort *tx_remove_ptr;
+		} s2;
+	} u3;
 #endif
 
 #ifdef  RTA
-        ushort      rx_pkts_added;
-        ushort      rx_pkts_removed;
-        Q_BUF_ptr   rx_q_start ;        /* Start of the Q list chain */
-        short       num_rx_q_bufs ;     /* Number of Q buffers in the chain */
-        PKT_ptr_ptr rx_add ;            /* Add a new Packet here */
-        Q_BUF_ptr   rx_add_qb ;         /* Pointer to the add Q buf */
-        PKT_ptr_ptr rx_add_st_qbb ;     /* Pointer to start of the Q's buf */
-        PKT_ptr_ptr rx_add_end_qbb ;    /* Pointer to the end of the Q's buf */
-        PKT_ptr_ptr rx_remove ;         /* Remove a Packet here */
-        Q_BUF_ptr   rx_remove_qb ;      /* Pointer to the remove Q buf */
-        PKT_ptr_ptr rx_remove_st_qbb ;  /* Pointer to the start of the Q buf */
-        PKT_ptr_ptr rx_remove_end_qbb ; /* Pointer to the end of the Q buf */
+	ushort rx_pkts_added;
+	ushort rx_pkts_removed;
+	Q_BUF_ptr rx_q_start;	/* Start of the Q list chain */
+	short num_rx_q_bufs;	/* Number of Q buffers in the chain */
+	PKT_ptr_ptr rx_add;	/* Add a new Packet here */
+	Q_BUF_ptr rx_add_qb;	/* Pointer to the add Q buf */
+	PKT_ptr_ptr rx_add_st_qbb;	/* Pointer to start of the Q's buf */
+	PKT_ptr_ptr rx_add_end_qbb;	/* Pointer to the end of the Q's buf */
+	PKT_ptr_ptr rx_remove;	/* Remove a Packet here */
+	Q_BUF_ptr rx_remove_qb;	/* Pointer to the remove Q buf */
+	PKT_ptr_ptr rx_remove_st_qbb;	/* Pointer to the start of the Q buf */
+	PKT_ptr_ptr rx_remove_end_qbb;	/* Pointer to the end of the Q buf */
 #endif
 #ifdef INKERNEL
-        PKT_ptr_ptr rx_start ;
-        PKT_ptr_ptr rx_end ;
-        PKT_ptr_ptr rx_add ;
-        PKT_ptr_ptr rx_remove ;
+	PKT_ptr_ptr rx_start;
+	PKT_ptr_ptr rx_end;
+	PKT_ptr_ptr rx_add;
+	PKT_ptr_ptr rx_remove;
 #endif
 #ifdef HOST
-        union
-        {
-            struct
-            {
-                PKT_ptr_ptr rx_start_ptr_ptr;
-                PKT_ptr_ptr rx_end_ptr_ptr;
-                PKT_ptr_ptr rx_add_ptr_ptr;
-                PKT_ptr_ptr rx_remove_ptr_ptr;
-            } s1;
-            struct
-            {
-                ushort * rx_start_ptr;
-                ushort * rx_end_ptr;
-                ushort * rx_add_ptr;
-                ushort * rx_remove_ptr;
-            } s2;
-        } u4;
+	union {
+		struct {
+			PKT_ptr_ptr rx_start_ptr_ptr;
+			PKT_ptr_ptr rx_end_ptr_ptr;
+			PKT_ptr_ptr rx_add_ptr_ptr;
+			PKT_ptr_ptr rx_remove_ptr_ptr;
+		} s1;
+		struct {
+			ushort *rx_start_ptr;
+			ushort *rx_end_ptr;
+			ushort *rx_add_ptr;
+			ushort *rx_remove_ptr;
+		} s2;
+	} u4;
 #endif
 
-#ifdef RTA                              /* some fields for the remotes */
-        ushort     flush_count;		/* Count of write flushes */
-        ushort     txmode;		/* Modes for tx */
-        ushort     rxmode;		/* Modes for rx */
-        ushort     portmode;		/* Generic modes */
-        ushort     column;		/* TAB3 column count */
-        ushort     tx_subscript;	/* (TX) Subscript into data field */
-        ushort     rx_subscript;	/* (RX) Subscript into data field */
-        PKT_ptr    rx_incomplete;	/* Hold an incomplete packet here */
-        ushort     modem_bits;		/* Modem bits to mask */
-	ushort	   lastModem;		/* Modem control lines. */
-        ushort     addr;		/* Address for sub commands */
-        ushort     MonitorTstate;	/* TRUE if monitoring tstop */
+#ifdef RTA			/* some fields for the remotes */
+	ushort flush_count;	/* Count of write flushes */
+	ushort txmode;		/* Modes for tx */
+	ushort rxmode;		/* Modes for rx */
+	ushort portmode;	/* Generic modes */
+	ushort column;		/* TAB3 column count */
+	ushort tx_subscript;	/* (TX) Subscript into data field */
+	ushort rx_subscript;	/* (RX) Subscript into data field */
+	PKT_ptr rx_incomplete;	/* Hold an incomplete packet here */
+	ushort modem_bits;	/* Modem bits to mask */
+	ushort lastModem;	/* Modem control lines. */
+	ushort addr;		/* Address for sub commands */
+	ushort MonitorTstate;	/* TRUE if monitoring tstop */
 #endif
 
-        } ;
+};
 
 #endif
 
 /*********** end of file ***********/
-