Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 5671 insertions, 0 deletions

diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c
new file mode 100644
index 000000000000..ec949e4c070f
--- /dev/null
+++ b/drivers/char/synclinkmp.c
@@ -0,0 +1,5671 @@
+/*
+ * $Id: synclinkmp.c,v 4.34 2005/03/04 15:07:10 paulkf Exp $
+ *
+ * Device driver for Microgate SyncLink Multiport
+ * high speed multiprotocol serial adapter.
+ *
+ * written by Paul Fulghum for Microgate Corporation
+ * paulkf@microgate.com
+ *
+ * Microgate and SyncLink are trademarks of Microgate Corporation
+ *
+ * Derived from serial.c written by Theodore Ts'o and Linus Torvalds
+ * This code is released under the GNU General Public License (GPL)
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
+#if defined(__i386__)
+#  define BREAKPOINT() asm("   int $3");
+#else
+#  define BREAKPOINT() { }
+#endif
+
+#define MAX_DEVICES 12
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/netdevice.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <asm/serial.h>
+#include <linux/delay.h>
+#include <linux/ioctl.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/dma.h>
+#include <linux/bitops.h>
+#include <asm/types.h>
+#include <linux/termios.h>
+#include <linux/workqueue.h>
+#include <linux/hdlc.h>
+
+#ifdef CONFIG_HDLC_MODULE
+#define CONFIG_HDLC 1
+#endif
+
+#define GET_USER(error,value,addr) error = get_user(value,addr)
+#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
+#define PUT_USER(error,value,addr) error = put_user(value,addr)
+#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
+
+#include <asm/uaccess.h>
+
+#include "linux/synclink.h"
+
+static MGSL_PARAMS default_params = {
+	MGSL_MODE_HDLC,			/* unsigned long mode */
+	0,				/* unsigned char loopback; */
+	HDLC_FLAG_UNDERRUN_ABORT15,	/* unsigned short flags; */
+	HDLC_ENCODING_NRZI_SPACE,	/* unsigned char encoding; */
+	0,				/* unsigned long clock_speed; */
+	0xff,				/* unsigned char addr_filter; */
+	HDLC_CRC_16_CCITT,		/* unsigned short crc_type; */
+	HDLC_PREAMBLE_LENGTH_8BITS,	/* unsigned char preamble_length; */
+	HDLC_PREAMBLE_PATTERN_NONE,	/* unsigned char preamble; */
+	9600,				/* unsigned long data_rate; */
+	8,				/* unsigned char data_bits; */
+	1,				/* unsigned char stop_bits; */
+	ASYNC_PARITY_NONE		/* unsigned char parity; */
+};
+
+/* size in bytes of DMA data buffers */
+#define SCABUFSIZE 	1024
+#define SCA_MEM_SIZE	0x40000
+#define SCA_BASE_SIZE   512
+#define SCA_REG_SIZE    16
+#define SCA_MAX_PORTS   4
+#define SCAMAXDESC 	128
+
+#define	BUFFERLISTSIZE	4096
+
+/* SCA-I style DMA buffer descriptor */
+typedef struct _SCADESC
+{
+	u16	next;		/* lower l6 bits of next descriptor addr */
+	u16	buf_ptr;	/* lower 16 bits of buffer addr */
+	u8	buf_base;	/* upper 8 bits of buffer addr */
+	u8	pad1;
+	u16	length;		/* length of buffer */
+	u8	status;		/* status of buffer */
+	u8	pad2;
+} SCADESC, *PSCADESC;
+
+typedef struct _SCADESC_EX
+{
+	/* device driver bookkeeping section */
+	char 	*virt_addr;    	/* virtual address of data buffer */
+	u16	phys_entry;	/* lower 16-bits of physical address of this descriptor */
+} SCADESC_EX, *PSCADESC_EX;
+
+/* The queue of BH actions to be performed */
+
+#define BH_RECEIVE  1
+#define BH_TRANSMIT 2
+#define BH_STATUS   4
+
+#define IO_PIN_SHUTDOWN_LIMIT 100
+
+#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+
+struct	_input_signal_events {
+	int	ri_up;
+	int	ri_down;
+	int	dsr_up;
+	int	dsr_down;
+	int	dcd_up;
+	int	dcd_down;
+	int	cts_up;
+	int	cts_down;
+};
+
+/*
+ * Device instance data structure
+ */
+typedef struct _synclinkmp_info {
+	void *if_ptr;				/* General purpose pointer (used by SPPP) */
+	int			magic;
+	int			flags;
+	int			count;		/* count of opens */
+	int			line;
+	unsigned short		close_delay;
+	unsigned short		closing_wait;	/* time to wait before closing */
+
+	struct mgsl_icount	icount;
+
+	struct tty_struct 	*tty;
+	int			timeout;
+	int			x_char;		/* xon/xoff character */
+	int			blocked_open;	/* # of blocked opens */
+	u16			read_status_mask1;  /* break detection (SR1 indications) */
+	u16			read_status_mask2;  /* parity/framing/overun (SR2 indications) */
+	unsigned char 		ignore_status_mask1;  /* break detection (SR1 indications) */
+	unsigned char		ignore_status_mask2;  /* parity/framing/overun (SR2 indications) */
+	unsigned char 		*tx_buf;
+	int			tx_put;
+	int			tx_get;
+	int			tx_count;
+
+	wait_queue_head_t	open_wait;
+	wait_queue_head_t	close_wait;
+
+	wait_queue_head_t	status_event_wait_q;
+	wait_queue_head_t	event_wait_q;
+	struct timer_list	tx_timer;	/* HDLC transmit timeout timer */
+	struct _synclinkmp_info	*next_device;	/* device list link */
+	struct timer_list	status_timer;	/* input signal status check timer */
+
+	spinlock_t lock;		/* spinlock for synchronizing with ISR */
+	struct work_struct task;	 		/* task structure for scheduling bh */
+
+	u32 max_frame_size;			/* as set by device config */
+
+	u32 pending_bh;
+
+	int bh_running;				/* Protection from multiple */
+	int isr_overflow;
+	int bh_requested;
+
+	int dcd_chkcount;			/* check counts to prevent */
+	int cts_chkcount;			/* too many IRQs if a signal */
+	int dsr_chkcount;			/* is floating */
+	int ri_chkcount;
+
+	char *buffer_list;			/* virtual address of Rx & Tx buffer lists */
+	unsigned long buffer_list_phys;
+
+	unsigned int rx_buf_count;		/* count of total allocated Rx buffers */
+	SCADESC *rx_buf_list;   		/* list of receive buffer entries */
+	SCADESC_EX rx_buf_list_ex[SCAMAXDESC]; /* list of receive buffer entries */
+	unsigned int current_rx_buf;
+
+	unsigned int tx_buf_count;		/* count of total allocated Tx buffers */
+	SCADESC *tx_buf_list;		/* list of transmit buffer entries */
+	SCADESC_EX tx_buf_list_ex[SCAMAXDESC]; /* list of transmit buffer entries */
+	unsigned int last_tx_buf;
+
+	unsigned char *tmp_rx_buf;
+	unsigned int tmp_rx_buf_count;
+
+	int rx_enabled;
+	int rx_overflow;
+
+	int tx_enabled;
+	int tx_active;
+	u32 idle_mode;
+
+	unsigned char ie0_value;
+	unsigned char ie1_value;
+	unsigned char ie2_value;
+	unsigned char ctrlreg_value;
+	unsigned char old_signals;
+
+	char device_name[25];			/* device instance name */
+
+	int port_count;
+	int adapter_num;
+	int port_num;
+
+	struct _synclinkmp_info *port_array[SCA_MAX_PORTS];
+
+	unsigned int bus_type;			/* expansion bus type (ISA,EISA,PCI) */
+
+	unsigned int irq_level;			/* interrupt level */
+	unsigned long irq_flags;
+	int irq_requested;			/* nonzero if IRQ requested */
+
+	MGSL_PARAMS params;			/* communications parameters */
+
+	unsigned char serial_signals;		/* current serial signal states */
+
+	int irq_occurred;			/* for diagnostics use */
+	unsigned int init_error;		/* Initialization startup error */
+
+	u32 last_mem_alloc;
+	unsigned char* memory_base;		/* shared memory address (PCI only) */
+	u32 phys_memory_base;
+    	int shared_mem_requested;
+
+	unsigned char* sca_base;		/* HD64570 SCA Memory address */
+	u32 phys_sca_base;
+	u32 sca_offset;
+	int sca_base_requested;
+
+	unsigned char* lcr_base;		/* local config registers (PCI only) */
+	u32 phys_lcr_base;
+	u32 lcr_offset;
+	int lcr_mem_requested;
+
+	unsigned char* statctrl_base;		/* status/control register memory */
+	u32 phys_statctrl_base;
+	u32 statctrl_offset;
+	int sca_statctrl_requested;
+
+	u32 misc_ctrl_value;
+	char flag_buf[MAX_ASYNC_BUFFER_SIZE];
+	char char_buf[MAX_ASYNC_BUFFER_SIZE];
+	BOOLEAN drop_rts_on_tx_done;
+
+	struct	_input_signal_events	input_signal_events;
+
+	/* SPPP/Cisco HDLC device parts */
+	int netcount;
+	int dosyncppp;
+	spinlock_t netlock;
+
+#ifdef CONFIG_HDLC
+	struct net_device *netdev;
+#endif
+
+} SLMP_INFO;
+
+#define MGSL_MAGIC 0x5401
+
+/*
+ * define serial signal status change macros
+ */
+#define	MISCSTATUS_DCD_LATCHED	(SerialSignal_DCD<<8)	/* indicates change in DCD */
+#define MISCSTATUS_RI_LATCHED	(SerialSignal_RI<<8)	/* indicates change in RI */
+#define MISCSTATUS_CTS_LATCHED	(SerialSignal_CTS<<8)	/* indicates change in CTS */
+#define MISCSTATUS_DSR_LATCHED	(SerialSignal_DSR<<8)	/* change in DSR */
+
+/* Common Register macros */
+#define LPR	0x00
+#define PABR0	0x02
+#define PABR1	0x03
+#define WCRL	0x04
+#define WCRM	0x05
+#define WCRH	0x06
+#define DPCR	0x08
+#define DMER	0x09
+#define ISR0	0x10
+#define ISR1	0x11
+#define ISR2	0x12
+#define IER0	0x14
+#define IER1	0x15
+#define IER2	0x16
+#define ITCR	0x18
+#define INTVR 	0x1a
+#define IMVR	0x1c
+
+/* MSCI Register macros */
+#define TRB	0x20
+#define TRBL	0x20
+#define TRBH	0x21
+#define SR0	0x22
+#define SR1	0x23
+#define SR2	0x24
+#define SR3	0x25
+#define FST	0x26
+#define IE0	0x28
+#define IE1	0x29
+#define IE2	0x2a
+#define FIE	0x2b
+#define CMD	0x2c
+#define MD0	0x2e
+#define MD1	0x2f
+#define MD2	0x30
+#define CTL	0x31
+#define SA0	0x32
+#define SA1	0x33
+#define IDL	0x34
+#define TMC	0x35
+#define RXS	0x36
+#define TXS	0x37
+#define TRC0	0x38
+#define TRC1	0x39
+#define RRC	0x3a
+#define CST0	0x3c
+#define CST1	0x3d
+
+/* Timer Register Macros */
+#define TCNT	0x60
+#define TCNTL	0x60
+#define TCNTH	0x61
+#define TCONR	0x62
+#define TCONRL	0x62
+#define TCONRH	0x63
+#define TMCS	0x64
+#define TEPR	0x65
+
+/* DMA Controller Register macros */
+#define DARL	0x80
+#define DARH	0x81
+#define DARB	0x82
+#define BAR	0x80
+#define BARL	0x80
+#define BARH	0x81
+#define BARB	0x82
+#define SAR	0x84
+#define SARL	0x84
+#define SARH	0x85
+#define SARB	0x86
+#define CPB	0x86
+#define CDA	0x88
+#define CDAL	0x88
+#define CDAH	0x89
+#define EDA	0x8a
+#define EDAL	0x8a
+#define EDAH	0x8b
+#define BFL	0x8c
+#define BFLL	0x8c
+#define BFLH	0x8d
+#define BCR	0x8e
+#define BCRL	0x8e
+#define BCRH	0x8f
+#define DSR	0x90
+#define DMR	0x91
+#define FCT	0x93
+#define DIR	0x94
+#define DCMD	0x95
+
+/* combine with timer or DMA register address */
+#define TIMER0	0x00
+#define TIMER1	0x08
+#define TIMER2	0x10
+#define TIMER3	0x18
+#define RXDMA 	0x00
+#define TXDMA 	0x20
+
+/* SCA Command Codes */
+#define NOOP		0x00
+#define TXRESET		0x01
+#define TXENABLE	0x02
+#define TXDISABLE	0x03
+#define TXCRCINIT	0x04
+#define TXCRCEXCL	0x05
+#define TXEOM		0x06
+#define TXABORT		0x07
+#define MPON		0x08
+#define TXBUFCLR	0x09
+#define RXRESET		0x11
+#define RXENABLE	0x12
+#define RXDISABLE	0x13
+#define RXCRCINIT	0x14
+#define RXREJECT	0x15
+#define SEARCHMP	0x16
+#define RXCRCEXCL	0x17
+#define RXCRCCALC	0x18
+#define CHRESET		0x21
+#define HUNT		0x31
+
+/* DMA command codes */
+#define SWABORT		0x01
+#define FEICLEAR	0x02
+
+/* IE0 */
+#define TXINTE 		BIT7
+#define RXINTE 		BIT6
+#define TXRDYE 		BIT1
+#define RXRDYE 		BIT0
+
+/* IE1 & SR1 */
+#define UDRN   	BIT7
+#define IDLE   	BIT6
+#define SYNCD  	BIT4
+#define FLGD   	BIT4
+#define CCTS   	BIT3
+#define CDCD   	BIT2
+#define BRKD   	BIT1
+#define ABTD   	BIT1
+#define GAPD   	BIT1
+#define BRKE   	BIT0
+#define IDLD	BIT0
+
+/* IE2 & SR2 */
+#define EOM	BIT7
+#define PMP	BIT6
+#define SHRT	BIT6
+#define PE	BIT5
+#define ABT	BIT5
+#define FRME	BIT4
+#define RBIT	BIT4
+#define OVRN	BIT3
+#define CRCE	BIT2
+
+
+/*
+ * Global linked list of SyncLink devices
+ */
+static SLMP_INFO *synclinkmp_device_list = NULL;
+static int synclinkmp_adapter_count = -1;
+static int synclinkmp_device_count = 0;
+
+/*
+ * Set this param to non-zero to load eax with the
+ * .text section address and breakpoint on module load.
+ * This is useful for use with gdb and add-symbol-file command.
+ */
+static int break_on_load=0;
+
+/*
+ * Driver major number, defaults to zero to get auto
+ * assigned major number. May be forced as module parameter.
+ */
+static int ttymajor=0;
+
+/*
+ * Array of user specified options for ISA adapters.
+ */
+static int debug_level = 0;
+static int maxframe[MAX_DEVICES] = {0,};
+static int dosyncppp[MAX_DEVICES] = {0,};
+
+module_param(break_on_load, bool, 0);
+module_param(ttymajor, int, 0);
+module_param(debug_level, int, 0);
+module_param_array(maxframe, int, NULL, 0);
+module_param_array(dosyncppp, int, NULL, 0);
+
+static char *driver_name = "SyncLink MultiPort driver";
+static char *driver_version = "$Revision: 4.34 $";
+
+static int synclinkmp_init_one(struct pci_dev *dev,const struct pci_device_id *ent);
+static void synclinkmp_remove_one(struct pci_dev *dev);
+
+static struct pci_device_id synclinkmp_pci_tbl[] = {
+	{ PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_SCA, PCI_ANY_ID, PCI_ANY_ID, },
+	{ 0, }, /* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, synclinkmp_pci_tbl);
+
+MODULE_LICENSE("GPL");
+
+static struct pci_driver synclinkmp_pci_driver = {
+	.name		= "synclinkmp",
+	.id_table	= synclinkmp_pci_tbl,
+	.probe		= synclinkmp_init_one,
+	.remove		= __devexit_p(synclinkmp_remove_one),
+};
+
+
+static struct tty_driver *serial_driver;
+
+/* number of characters left in xmit buffer before we ask for more */
+#define WAKEUP_CHARS 256
+
+
+/* tty callbacks */
+
+static int  open(struct tty_struct *tty, struct file * filp);
+static void close(struct tty_struct *tty, struct file * filp);
+static void hangup(struct tty_struct *tty);
+static void set_termios(struct tty_struct *tty, struct termios *old_termios);
+
+static int  write(struct tty_struct *tty, const unsigned char *buf, int count);
+static void put_char(struct tty_struct *tty, unsigned char ch);
+static void send_xchar(struct tty_struct *tty, char ch);
+static void wait_until_sent(struct tty_struct *tty, int timeout);
+static int  write_room(struct tty_struct *tty);
+static void flush_chars(struct tty_struct *tty);
+static void flush_buffer(struct tty_struct *tty);
+static void tx_hold(struct tty_struct *tty);
+static void tx_release(struct tty_struct *tty);
+
+static int  ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
+static int  read_proc(char *page, char **start, off_t off, int count,int *eof, void *data);
+static int  chars_in_buffer(struct tty_struct *tty);
+static void throttle(struct tty_struct * tty);
+static void unthrottle(struct tty_struct * tty);
+static void set_break(struct tty_struct *tty, int break_state);
+
+#ifdef CONFIG_HDLC
+#define dev_to_port(D) (dev_to_hdlc(D)->priv)
+static void hdlcdev_tx_done(SLMP_INFO *info);
+static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size);
+static int  hdlcdev_init(SLMP_INFO *info);
+static void hdlcdev_exit(SLMP_INFO *info);
+#endif
+
+/* ioctl handlers */
+
+static int  get_stats(SLMP_INFO *info, struct mgsl_icount __user *user_icount);
+static int  get_params(SLMP_INFO *info, MGSL_PARAMS __user *params);
+static int  set_params(SLMP_INFO *info, MGSL_PARAMS __user *params);
+static int  get_txidle(SLMP_INFO *info, int __user *idle_mode);
+static int  set_txidle(SLMP_INFO *info, int idle_mode);
+static int  tx_enable(SLMP_INFO *info, int enable);
+static int  tx_abort(SLMP_INFO *info);
+static int  rx_enable(SLMP_INFO *info, int enable);
+static int  map_status(int signals);
+static int  modem_input_wait(SLMP_INFO *info,int arg);
+static int  wait_mgsl_event(SLMP_INFO *info, int __user *mask_ptr);
+static int  tiocmget(struct tty_struct *tty, struct file *file);
+static int  tiocmset(struct tty_struct *tty, struct file *file,
+		     unsigned int set, unsigned int clear);
+static void set_break(struct tty_struct *tty, int break_state);
+
+static void add_device(SLMP_INFO *info);
+static void device_init(int adapter_num, struct pci_dev *pdev);
+static int  claim_resources(SLMP_INFO *info);
+static void release_resources(SLMP_INFO *info);
+
+static int  startup(SLMP_INFO *info);
+static int  block_til_ready(struct tty_struct *tty, struct file * filp,SLMP_INFO *info);
+static void shutdown(SLMP_INFO *info);
+static void program_hw(SLMP_INFO *info);
+static void change_params(SLMP_INFO *info);
+
+static int  init_adapter(SLMP_INFO *info);
+static int  register_test(SLMP_INFO *info);
+static int  irq_test(SLMP_INFO *info);
+static int  loopback_test(SLMP_INFO *info);
+static int  adapter_test(SLMP_INFO *info);
+static int  memory_test(SLMP_INFO *info);
+
+static void reset_adapter(SLMP_INFO *info);
+static void reset_port(SLMP_INFO *info);
+static void async_mode(SLMP_INFO *info);
+static void hdlc_mode(SLMP_INFO *info);
+
+static void rx_stop(SLMP_INFO *info);
+static void rx_start(SLMP_INFO *info);
+static void rx_reset_buffers(SLMP_INFO *info);
+static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last);
+static int  rx_get_frame(SLMP_INFO *info);
+
+static void tx_start(SLMP_INFO *info);
+static void tx_stop(SLMP_INFO *info);
+static void tx_load_fifo(SLMP_INFO *info);
+static void tx_set_idle(SLMP_INFO *info);
+static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count);
+
+static void get_signals(SLMP_INFO *info);
+static void set_signals(SLMP_INFO *info);
+static void enable_loopback(SLMP_INFO *info, int enable);
+static void set_rate(SLMP_INFO *info, u32 data_rate);
+
+static int  bh_action(SLMP_INFO *info);
+static void bh_handler(void* Context);
+static void bh_receive(SLMP_INFO *info);
+static void bh_transmit(SLMP_INFO *info);
+static void bh_status(SLMP_INFO *info);
+static void isr_timer(SLMP_INFO *info);
+static void isr_rxint(SLMP_INFO *info);
+static void isr_rxrdy(SLMP_INFO *info);
+static void isr_txint(SLMP_INFO *info);
+static void isr_txrdy(SLMP_INFO *info);
+static void isr_rxdmaok(SLMP_INFO *info);
+static void isr_rxdmaerror(SLMP_INFO *info);
+static void isr_txdmaok(SLMP_INFO *info);
+static void isr_txdmaerror(SLMP_INFO *info);
+static void isr_io_pin(SLMP_INFO *info, u16 status);
+
+static int  alloc_dma_bufs(SLMP_INFO *info);
+static void free_dma_bufs(SLMP_INFO *info);
+static int  alloc_buf_list(SLMP_INFO *info);
+static int  alloc_frame_bufs(SLMP_INFO *info, SCADESC *list, SCADESC_EX *list_ex,int count);
+static int  alloc_tmp_rx_buf(SLMP_INFO *info);
+static void free_tmp_rx_buf(SLMP_INFO *info);
+
+static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count);
+static void trace_block(SLMP_INFO *info, const char* data, int count, int xmit);
+static void tx_timeout(unsigned long context);
+static void status_timeout(unsigned long context);
+
+static unsigned char read_reg(SLMP_INFO *info, unsigned char addr);
+static void write_reg(SLMP_INFO *info, unsigned char addr, unsigned char val);
+static u16 read_reg16(SLMP_INFO *info, unsigned char addr);
+static void write_reg16(SLMP_INFO *info, unsigned char addr, u16 val);
+static unsigned char read_status_reg(SLMP_INFO * info);
+static void write_control_reg(SLMP_INFO * info);
+
+
+static unsigned char rx_active_fifo_level = 16;	// rx request FIFO activation level in bytes
+static unsigned char tx_active_fifo_level = 16;	// tx request FIFO activation level in bytes
+static unsigned char tx_negate_fifo_level = 32;	// tx request FIFO negation level in bytes
+
+static u32 misc_ctrl_value = 0x007e4040;
+static u32 lcr1_brdr_value = 0x00800029;
+
+static u32 read_ahead_count = 8;
+
+/* DPCR, DMA Priority Control
+ *
+ * 07..05  Not used, must be 0
+ * 04      BRC, bus release condition: 0=all transfers complete
+ *              1=release after 1 xfer on all channels
+ * 03      CCC, channel change condition: 0=every cycle
+ *              1=after each channel completes all xfers
+ * 02..00  PR<2..0>, priority 100=round robin
+ *
+ * 00000100 = 0x00
+ */
+static unsigned char dma_priority = 0x04;
+
+// Number of bytes that can be written to shared RAM
+// in a single write operation
+static u32 sca_pci_load_interval = 64;
+
+/*
+ * 1st function defined in .text section. Calling this function in
+ * init_module() followed by a breakpoint allows a remote debugger
+ * (gdb) to get the .text address for the add-symbol-file command.
+ * This allows remote debugging of dynamically loadable modules.
+ */
+static void* synclinkmp_get_text_ptr(void);
+static void* synclinkmp_get_text_ptr(void) {return synclinkmp_get_text_ptr;}
+
+static inline int sanity_check(SLMP_INFO *info,
+			       char *name, const char *routine)
+{
+#ifdef SANITY_CHECK
+	static const char *badmagic =
+		"Warning: bad magic number for synclinkmp_struct (%s) in %s\n";
+	static const char *badinfo =
+		"Warning: null synclinkmp_struct for (%s) in %s\n";
+
+	if (!info) {
+		printk(badinfo, name, routine);
+		return 1;
+	}
+	if (info->magic != MGSL_MAGIC) {
+		printk(badmagic, name, routine);
+		return 1;
+	}
+#else
+	if (!info)
+		return 1;
+#endif
+	return 0;
+}
+
+/**
+ * line discipline callback wrappers
+ *
+ * The wrappers maintain line discipline references
+ * while calling into the line discipline.
+ *
+ * ldisc_receive_buf  - pass receive data to line discipline
+ */
+
+static void ldisc_receive_buf(struct tty_struct *tty,
+			      const __u8 *data, char *flags, int count)
+{
+	struct tty_ldisc *ld;
+	if (!tty)
+		return;
+	ld = tty_ldisc_ref(tty);
+	if (ld) {
+		if (ld->receive_buf)
+			ld->receive_buf(tty, data, flags, count);
+		tty_ldisc_deref(ld);
+	}
+}
+
+/* tty callbacks */
+
+/* Called when a port is opened.  Init and enable port.
+ */
+static int open(struct tty_struct *tty, struct file *filp)
+{
+	SLMP_INFO *info;
+	int retval, line;
+	unsigned long flags;
+
+	line = tty->index;
+	if ((line < 0) || (line >= synclinkmp_device_count)) {
+		printk("%s(%d): open with invalid line #%d.\n",
+			__FILE__,__LINE__,line);
+		return -ENODEV;
+	}
+
+	info = synclinkmp_device_list;
+	while(info && info->line != line)
+		info = info->next_device;
+	if (sanity_check(info, tty->name, "open"))
+		return -ENODEV;
+	if ( info->init_error ) {
+		printk("%s(%d):%s device is not allocated, init error=%d\n",
+			__FILE__,__LINE__,info->device_name,info->init_error);
+		return -ENODEV;
+	}
+
+	tty->driver_data = info;
+	info->tty = tty;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s open(), old ref count = %d\n",
+			 __FILE__,__LINE__,tty->driver->name, info->count);
+
+	/* If port is closing, signal caller to try again */
+	if (tty_hung_up_p(filp) || info->flags & ASYNC_CLOSING){
+		if (info->flags & ASYNC_CLOSING)
+			interruptible_sleep_on(&info->close_wait);
+		retval = ((info->flags & ASYNC_HUP_NOTIFY) ?
+			-EAGAIN : -ERESTARTSYS);
+		goto cleanup;
+	}
+
+	info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+
+	spin_lock_irqsave(&info->netlock, flags);
+	if (info->netcount) {
+		retval = -EBUSY;
+		spin_unlock_irqrestore(&info->netlock, flags);
+		goto cleanup;
+	}
+	info->count++;
+	spin_unlock_irqrestore(&info->netlock, flags);
+
+	if (info->count == 1) {
+		/* 1st open on this device, init hardware */
+		retval = startup(info);
+		if (retval < 0)
+			goto cleanup;
+	}
+
+	retval = block_til_ready(tty, filp, info);
+	if (retval) {
+		if (debug_level >= DEBUG_LEVEL_INFO)
+			printk("%s(%d):%s block_til_ready() returned %d\n",
+				 __FILE__,__LINE__, info->device_name, retval);
+		goto cleanup;
+	}
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s open() success\n",
+			 __FILE__,__LINE__, info->device_name);
+	retval = 0;
+
+cleanup:
+	if (retval) {
+		if (tty->count == 1)
+			info->tty = NULL; /* tty layer will release tty struct */
+		if(info->count)
+			info->count--;
+	}
+
+	return retval;
+}
+
+/* Called when port is closed. Wait for remaining data to be
+ * sent. Disable port and free resources.
+ */
+static void close(struct tty_struct *tty, struct file *filp)
+{
+	SLMP_INFO * info = (SLMP_INFO *)tty->driver_data;
+
+	if (sanity_check(info, tty->name, "close"))
+		return;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s close() entry, count=%d\n",
+			 __FILE__,__LINE__, info->device_name, info->count);
+
+	if (!info->count)
+		return;
+
+	if (tty_hung_up_p(filp))
+		goto cleanup;
+
+	if ((tty->count == 1) && (info->count != 1)) {
+		/*
+		 * tty->count is 1 and the tty structure will be freed.
+		 * info->count should be one in this case.
+		 * if it's not, correct it so that the port is shutdown.
+		 */
+		printk("%s(%d):%s close: bad refcount; tty->count is 1, "
+		       "info->count is %d\n",
+			 __FILE__,__LINE__, info->device_name, info->count);
+		info->count = 1;
+	}
+
+	info->count--;
+
+	/* if at least one open remaining, leave hardware active */
+	if (info->count)
+		goto cleanup;
+
+	info->flags |= ASYNC_CLOSING;
+
+	/* set tty->closing to notify line discipline to
+	 * only process XON/XOFF characters. Only the N_TTY
+	 * discipline appears to use this (ppp does not).
+	 */
+	tty->closing = 1;
+
+	/* wait for transmit data to clear all layers */
+
+	if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) {
+		if (debug_level >= DEBUG_LEVEL_INFO)
+			printk("%s(%d):%s close() calling tty_wait_until_sent\n",
+				 __FILE__,__LINE__, info->device_name );
+		tty_wait_until_sent(tty, info->closing_wait);
+	}
+
+ 	if (info->flags & ASYNC_INITIALIZED)
+ 		wait_until_sent(tty, info->timeout);
+
+	if (tty->driver->flush_buffer)
+		tty->driver->flush_buffer(tty);
+
+	tty_ldisc_flush(tty);
+
+	shutdown(info);
+
+	tty->closing = 0;
+	info->tty = NULL;
+
+	if (info->blocked_open) {
+		if (info->close_delay) {
+			msleep_interruptible(jiffies_to_msecs(info->close_delay));
+		}
+		wake_up_interruptible(&info->open_wait);
+	}
+
+	info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+
+	wake_up_interruptible(&info->close_wait);
+
+cleanup:
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s close() exit, count=%d\n", __FILE__,__LINE__,
+			tty->driver->name, info->count);
+}
+
+/* Called by tty_hangup() when a hangup is signaled.
+ * This is the same as closing all open descriptors for the port.
+ */
+static void hangup(struct tty_struct *tty)
+{
+	SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s hangup()\n",
+			 __FILE__,__LINE__, info->device_name );
+
+	if (sanity_check(info, tty->name, "hangup"))
+		return;
+
+	flush_buffer(tty);
+	shutdown(info);
+
+	info->count = 0;
+	info->flags &= ~ASYNC_NORMAL_ACTIVE;
+	info->tty = NULL;
+
+	wake_up_interruptible(&info->open_wait);
+}
+
+/* Set new termios settings
+ */
+static void set_termios(struct tty_struct *tty, struct termios *old_termios)
+{
+	SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
+	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s set_termios()\n", __FILE__,__LINE__,
+			tty->driver->name );
+
+	/* just return if nothing has changed */
+	if ((tty->termios->c_cflag == old_termios->c_cflag)
+	    && (RELEVANT_IFLAG(tty->termios->c_iflag)
+		== RELEVANT_IFLAG(old_termios->c_iflag)))
+	  return;
+
+	change_params(info);
+
+	/* Handle transition to B0 status */
+	if (old_termios->c_cflag & CBAUD &&
+	    !(tty->termios->c_cflag & CBAUD)) {
+		info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+		spin_lock_irqsave(&info->lock,flags);
+	 	set_signals(info);
+		spin_unlock_irqrestore(&info->lock,flags);
+	}
+
+	/* Handle transition away from B0 status */
+	if (!(old_termios->c_cflag & CBAUD) &&
+	    tty->termios->c_cflag & CBAUD) {
+		info->serial_signals |= SerialSignal_DTR;
+ 		if (!(tty->termios->c_cflag & CRTSCTS) ||
+ 		    !test_bit(TTY_THROTTLED, &tty->flags)) {
+			info->serial_signals |= SerialSignal_RTS;
+ 		}
+		spin_lock_irqsave(&info->lock,flags);
+	 	set_signals(info);
+		spin_unlock_irqrestore(&info->lock,flags);
+	}
+
+	/* Handle turning off CRTSCTS */
+	if (old_termios->c_cflag & CRTSCTS &&
+	    !(tty->termios->c_cflag & CRTSCTS)) {
+		tty->hw_stopped = 0;
+		tx_release(tty);
+	}
+}
+
+/* Send a block of data
+ *
+ * Arguments:
+ *
+ * 	tty		pointer to tty information structure
+ * 	buf		pointer to buffer containing send data
+ * 	count		size of send data in bytes
+ *
+ * Return Value:	number of characters written
+ */
+static int write(struct tty_struct *tty,
+		 const unsigned char *buf, int count)
+{
+	int	c, ret = 0;
+	SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
+	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s write() count=%d\n",
+		       __FILE__,__LINE__,info->device_name,count);
+
+	if (sanity_check(info, tty->name, "write"))
+		goto cleanup;
+
+	if (!tty || !info->tx_buf)
+		goto cleanup;
+
+	if (info->params.mode == MGSL_MODE_HDLC) {
+		if (count > info->max_frame_size) {
+			ret = -EIO;
+			goto cleanup;
+		}
+		if (info->tx_active)
+			goto cleanup;
+		if (info->tx_count) {
+			/* send accumulated data from send_char() calls */
+			/* as frame and wait before accepting more data. */
+			tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
+			goto start;
+		}
+		ret = info->tx_count = count;
+		tx_load_dma_buffer(info, buf, count);
+		goto start;
+	}
+
+	for (;;) {
+		c = min_t(int, count,
+			min(info->max_frame_size - info->tx_count - 1,
+			    info->max_frame_size - info->tx_put));
+		if (c <= 0)
+			break;
+			
+		memcpy(info->tx_buf + info->tx_put, buf, c);
+
+		spin_lock_irqsave(&info->lock,flags);
+		info->tx_put += c;
+		if (info->tx_put >= info->max_frame_size)
+			info->tx_put -= info->max_frame_size;
+		info->tx_count += c;
+		spin_unlock_irqrestore(&info->lock,flags);
+
+		buf += c;
+		count -= c;
+		ret += c;
+	}
+
+	if (info->params.mode == MGSL_MODE_HDLC) {
+		if (count) {
+			ret = info->tx_count = 0;
+			goto cleanup;
+		}
+		tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
+	}
+start:
+ 	if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
+		spin_lock_irqsave(&info->lock,flags);
+		if (!info->tx_active)
+		 	tx_start(info);
+		spin_unlock_irqrestore(&info->lock,flags);
+ 	}
+
+cleanup:
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk( "%s(%d):%s write() returning=%d\n",
+			__FILE__,__LINE__,info->device_name,ret);
+	return ret;
+}
+
+/* Add a character to the transmit buffer.
+ */
+static void put_char(struct tty_struct *tty, unsigned char ch)
+{
+	SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
+	unsigned long flags;
+
+	if ( debug_level >= DEBUG_LEVEL_INFO ) {
+		printk( "%s(%d):%s put_char(%d)\n",
+			__FILE__,__LINE__,info->device_name,ch);
+	}
+
+	if (sanity_check(info, tty->name, "put_char"))
+		return;
+
+	if (!tty || !info->tx_buf)
+		return;
+
+	spin_lock_irqsave(&info->lock,flags);
+
+	if ( (info->params.mode != MGSL_MODE_HDLC) ||
+	     !info->tx_active ) {
+
+		if (info->tx_count < info->max_frame_size - 1) {
+			info->tx_buf[info->tx_put++] = ch;
+			if (info->tx_put >= info->max_frame_size)
+				info->tx_put -= info->max_frame_size;
+			info->tx_count++;
+		}
+	}
+
+	spin_unlock_irqrestore(&info->lock,flags);
+}
+
+/* Send a high-priority XON/XOFF character
+ */
+static void send_xchar(struct tty_struct *tty, char ch)
+{
+	SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
+	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s send_xchar(%d)\n",
+			 __FILE__,__LINE__, info->device_name, ch );
+
+	if (sanity_check(info, tty->name, "send_xchar"))
+		return;
+
+	info->x_char = ch;
+	if (ch) {
+		/* Make sure transmit interrupts are on */
+		spin_lock_irqsave(&info->lock,flags);
+		if (!info->tx_enabled)
+		 	tx_start(info);
+		spin_unlock_irqrestore(&info->lock,flags);
+	}
+}
+
+/* Wait until the transmitter is empty.
+ */
+static void wait_until_sent(struct tty_struct *tty, int timeout)
+{
+	SLMP_INFO * info = (SLMP_INFO *)tty->driver_data;
+	unsigned long orig_jiffies, char_time;
+
+	if (!info )
+		return;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s wait_until_sent() entry\n",
+			 __FILE__,__LINE__, info->device_name );
+
+	if (sanity_check(info, tty->name, "wait_until_sent"))
+		return;
+
+	if (!(info->flags & ASYNC_INITIALIZED))
+		goto exit;
+
+	orig_jiffies = jiffies;
+
+	/* Set check interval to 1/5 of estimated time to
+	 * send a character, and make it at least 1. The check
+	 * interval should also be less than the timeout.
+	 * Note: use tight timings here to satisfy the NIST-PCTS.
+	 */
+
+	if ( info->params.data_rate ) {
+	       	char_time = info->timeout/(32 * 5);
+		if (!char_time)
+			char_time++;
+	} else
+		char_time = 1;
+
+	if (timeout)
+		char_time = min_t(unsigned long, char_time, timeout);
+
+	if ( info->params.mode == MGSL_MODE_HDLC ) {
+		while (info->tx_active) {
+			msleep_interruptible(jiffies_to_msecs(char_time));
+			if (signal_pending(current))
+				break;
+			if (timeout && time_after(jiffies, orig_jiffies + timeout))
+				break;
+		}
+	} else {
+		//TODO: determine if there is something similar to USC16C32
+		// 	TXSTATUS_ALL_SENT status
+		while ( info->tx_active && info->tx_enabled) {
+			msleep_interruptible(jiffies_to_msecs(char_time));
+			if (signal_pending(current))
+				break;
+			if (timeout && time_after(jiffies, orig_jiffies + timeout))
+				break;
+		}
+	}
+
+exit:
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s wait_until_sent() exit\n",
+			 __FILE__,__LINE__, info->device_name );
+}
+
+/* Return the count of free bytes in transmit buffer
+ */
+static int write_room(struct tty_struct *tty)
+{
+	SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
+	int ret;
+
+	if (sanity_check(info, tty->name, "write_room"))
+		return 0;
+
+	if (info->params.mode == MGSL_MODE_HDLC) {
+		ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
+	} else {
+		ret = info->max_frame_size - info->tx_count - 1;
+		if (ret < 0)
+			ret = 0;
+	}
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s write_room()=%d\n",
+		       __FILE__, __LINE__, info->device_name, ret);
+
+	return ret;
+}
+
+/* enable transmitter and send remaining buffered characters
+ */
+static void flush_chars(struct tty_struct *tty)
+{
+	SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
+	unsigned long flags;
+
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk( "%s(%d):%s flush_chars() entry tx_count=%d\n",
+			__FILE__,__LINE__,info->device_name,info->tx_count);
+
+	if (sanity_check(info, tty->name, "flush_chars"))
+		return;
+
+	if (info->tx_count <= 0 || tty->stopped || tty->hw_stopped ||
+	    !info->tx_buf)
+		return;
+
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk( "%s(%d):%s flush_chars() entry, starting transmitter\n",
+			__FILE__,__LINE__,info->device_name );
+
+	spin_lock_irqsave(&info->lock,flags);
+
+	if (!info->tx_active) {
+		if ( (info->params.mode == MGSL_MODE_HDLC) &&
+			info->tx_count ) {
+			/* operating in synchronous (frame oriented) mode */
+			/* copy data from circular tx_buf to */
+			/* transmit DMA buffer. */
+			tx_load_dma_buffer(info,
+				 info->tx_buf,info->tx_count);
+		}
+	 	tx_start(info);
+	}
+
+	spin_unlock_irqrestore(&info->lock,flags);
+}
+
+/* Discard all data in the send buffer
+ */
+static void flush_buffer(struct tty_struct *tty)
+{
+	SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
+	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s flush_buffer() entry\n",
+			 __FILE__,__LINE__, info->device_name );
+
+	if (sanity_check(info, tty->name, "flush_buffer"))
+		return;
+
+	spin_lock_irqsave(&info->lock,flags);
+	info->tx_count = info->tx_put = info->tx_get = 0;
+	del_timer(&info->tx_timer);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	wake_up_interruptible(&tty->write_wait);
+	tty_wakeup(tty);
+}
+
+/* throttle (stop) transmitter
+ */
+static void tx_hold(struct tty_struct *tty)
+{
+	SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
+	unsigned long flags;
+
+	if (sanity_check(info, tty->name, "tx_hold"))
+		return;
+
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk("%s(%d):%s tx_hold()\n",
+			__FILE__,__LINE__,info->device_name);
+
+	spin_lock_irqsave(&info->lock,flags);
+	if (info->tx_enabled)
+	 	tx_stop(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+}
+
+/* release (start) transmitter
+ */
+static void tx_release(struct tty_struct *tty)
+{
+	SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
+	unsigned long flags;
+
+	if (sanity_check(info, tty->name, "tx_release"))
+		return;
+
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk("%s(%d):%s tx_release()\n",
+			__FILE__,__LINE__,info->device_name);
+
+	spin_lock_irqsave(&info->lock,flags);
+	if (!info->tx_enabled)
+	 	tx_start(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+}
+
+/* Service an IOCTL request
+ *
+ * Arguments:
+ *
+ * 	tty	pointer to tty instance data
+ * 	file	pointer to associated file object for device
+ * 	cmd	IOCTL command code
+ * 	arg	command argument/context
+ *
+ * Return Value:	0 if success, otherwise error code
+ */
+static int ioctl(struct tty_struct *tty, struct file *file,
+		 unsigned int cmd, unsigned long arg)
+{
+	SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
+	int error;
+	struct mgsl_icount cnow;	/* kernel counter temps */
+	struct serial_icounter_struct __user *p_cuser;	/* user space */
+	unsigned long flags;
+	void __user *argp = (void __user *)arg;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s ioctl() cmd=%08X\n", __FILE__,__LINE__,
+			info->device_name, cmd );
+
+	if (sanity_check(info, tty->name, "ioctl"))
+		return -ENODEV;
+
+	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
+	    (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+		if (tty->flags & (1 << TTY_IO_ERROR))
+		    return -EIO;
+	}
+
+	switch (cmd) {
+	case MGSL_IOCGPARAMS:
+		return get_params(info, argp);
+	case MGSL_IOCSPARAMS:
+		return set_params(info, argp);
+	case MGSL_IOCGTXIDLE:
+		return get_txidle(info, argp);
+	case MGSL_IOCSTXIDLE:
+		return set_txidle(info, (int)arg);
+	case MGSL_IOCTXENABLE:
+		return tx_enable(info, (int)arg);
+	case MGSL_IOCRXENABLE:
+		return rx_enable(info, (int)arg);
+	case MGSL_IOCTXABORT:
+		return tx_abort(info);
+	case MGSL_IOCGSTATS:
+		return get_stats(info, argp);
+	case MGSL_IOCWAITEVENT:
+		return wait_mgsl_event(info, argp);
+	case MGSL_IOCLOOPTXDONE:
+		return 0; // TODO: Not supported, need to document
+		/* Wait for modem input (DCD,RI,DSR,CTS) change
+		 * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS)
+		 */
+	case TIOCMIWAIT:
+		return modem_input_wait(info,(int)arg);
+		
+		/*
+		 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+		 * Return: write counters to the user passed counter struct
+		 * NB: both 1->0 and 0->1 transitions are counted except for
+		 *     RI where only 0->1 is counted.
+		 */
+	case TIOCGICOUNT:
+		spin_lock_irqsave(&info->lock,flags);
+		cnow = info->icount;
+		spin_unlock_irqrestore(&info->lock,flags);
+		p_cuser = argp;
+		PUT_USER(error,cnow.cts, &p_cuser->cts);
+		if (error) return error;
+		PUT_USER(error,cnow.dsr, &p_cuser->dsr);
+		if (error) return error;
+		PUT_USER(error,cnow.rng, &p_cuser->rng);
+		if (error) return error;
+		PUT_USER(error,cnow.dcd, &p_cuser->dcd);
+		if (error) return error;
+		PUT_USER(error,cnow.rx, &p_cuser->rx);
+		if (error) return error;
+		PUT_USER(error,cnow.tx, &p_cuser->tx);
+		if (error) return error;
+		PUT_USER(error,cnow.frame, &p_cuser->frame);
+		if (error) return error;
+		PUT_USER(error,cnow.overrun, &p_cuser->overrun);
+		if (error) return error;
+		PUT_USER(error,cnow.parity, &p_cuser->parity);
+		if (error) return error;
+		PUT_USER(error,cnow.brk, &p_cuser->brk);
+		if (error) return error;
+		PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun);
+		if (error) return error;
+		return 0;
+	default:
+		return -ENOIOCTLCMD;
+	}
+	return 0;
+}
+
+/*
+ * /proc fs routines....
+ */
+
+static inline int line_info(char *buf, SLMP_INFO *info)
+{
+	char	stat_buf[30];
+	int	ret;
+	unsigned long flags;
+
+	ret = sprintf(buf, "%s: SCABase=%08x Mem=%08X StatusControl=%08x LCR=%08X\n"
+		       "\tIRQ=%d MaxFrameSize=%u\n",
+		info->device_name,
+		info->phys_sca_base,
+		info->phys_memory_base,
+		info->phys_statctrl_base,
+		info->phys_lcr_base,
+		info->irq_level,
+		info->max_frame_size );
+
+	/* output current serial signal states */
+	spin_lock_irqsave(&info->lock,flags);
+ 	get_signals(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	stat_buf[0] = 0;
+	stat_buf[1] = 0;
+	if (info->serial_signals & SerialSignal_RTS)
+		strcat(stat_buf, "|RTS");
+	if (info->serial_signals & SerialSignal_CTS)
+		strcat(stat_buf, "|CTS");
+	if (info->serial_signals & SerialSignal_DTR)
+		strcat(stat_buf, "|DTR");
+	if (info->serial_signals & SerialSignal_DSR)
+		strcat(stat_buf, "|DSR");
+	if (info->serial_signals & SerialSignal_DCD)
+		strcat(stat_buf, "|CD");
+	if (info->serial_signals & SerialSignal_RI)
+		strcat(stat_buf, "|RI");
+
+	if (info->params.mode == MGSL_MODE_HDLC) {
+		ret += sprintf(buf+ret, "\tHDLC txok:%d rxok:%d",
+			      info->icount.txok, info->icount.rxok);
+		if (info->icount.txunder)
+			ret += sprintf(buf+ret, " txunder:%d", info->icount.txunder);
+		if (info->icount.txabort)
+			ret += sprintf(buf+ret, " txabort:%d", info->icount.txabort);
+		if (info->icount.rxshort)
+			ret += sprintf(buf+ret, " rxshort:%d", info->icount.rxshort);
+		if (info->icount.rxlong)
+			ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxlong);
+		if (info->icount.rxover)
+			ret += sprintf(buf+ret, " rxover:%d", info->icount.rxover);
+		if (info->icount.rxcrc)
+			ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxcrc);
+	} else {
+		ret += sprintf(buf+ret, "\tASYNC tx:%d rx:%d",
+			      info->icount.tx, info->icount.rx);
+		if (info->icount.frame)
+			ret += sprintf(buf+ret, " fe:%d", info->icount.frame);
+		if (info->icount.parity)
+			ret += sprintf(buf+ret, " pe:%d", info->icount.parity);
+		if (info->icount.brk)
+			ret += sprintf(buf+ret, " brk:%d", info->icount.brk);
+		if (info->icount.overrun)
+			ret += sprintf(buf+ret, " oe:%d", info->icount.overrun);
+	}
+
+	/* Append serial signal status to end */
+	ret += sprintf(buf+ret, " %s\n", stat_buf+1);
+
+	ret += sprintf(buf+ret, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
+	 info->tx_active,info->bh_requested,info->bh_running,
+	 info->pending_bh);
+
+	return ret;
+}
+
+/* Called to print information about devices
+ */
+int read_proc(char *page, char **start, off_t off, int count,
+	      int *eof, void *data)
+{
+	int len = 0, l;
+	off_t	begin = 0;
+	SLMP_INFO *info;
+
+	len += sprintf(page, "synclinkmp driver:%s\n", driver_version);
+
+	info = synclinkmp_device_list;
+	while( info ) {
+		l = line_info(page + len, info);
+		len += l;
+		if (len+begin > off+count)
+			goto done;
+		if (len+begin < off) {
+			begin += len;
+			len = 0;
+		}
+		info = info->next_device;
+	}
+
+	*eof = 1;
+done:
+	if (off >= len+begin)
+		return 0;
+	*start = page + (off-begin);
+	return ((count < begin+len-off) ? count : begin+len-off);
+}
+
+/* Return the count of bytes in transmit buffer
+ */
+static int chars_in_buffer(struct tty_struct *tty)
+{
+	SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
+
+	if (sanity_check(info, tty->name, "chars_in_buffer"))
+		return 0;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s chars_in_buffer()=%d\n",
+		       __FILE__, __LINE__, info->device_name, info->tx_count);
+
+	return info->tx_count;
+}
+
+/* Signal remote device to throttle send data (our receive data)
+ */
+static void throttle(struct tty_struct * tty)
+{
+	SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
+	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s throttle() entry\n",
+			 __FILE__,__LINE__, info->device_name );
+
+	if (sanity_check(info, tty->name, "throttle"))
+		return;
+
+	if (I_IXOFF(tty))
+		send_xchar(tty, STOP_CHAR(tty));
+
+ 	if (tty->termios->c_cflag & CRTSCTS) {
+		spin_lock_irqsave(&info->lock,flags);
+		info->serial_signals &= ~SerialSignal_RTS;
+	 	set_signals(info);
+		spin_unlock_irqrestore(&info->lock,flags);
+	}
+}
+
+/* Signal remote device to stop throttling send data (our receive data)
+ */
+static void unthrottle(struct tty_struct * tty)
+{
+	SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
+	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s unthrottle() entry\n",
+			 __FILE__,__LINE__, info->device_name );
+
+	if (sanity_check(info, tty->name, "unthrottle"))
+		return;
+
+	if (I_IXOFF(tty)) {
+		if (info->x_char)
+			info->x_char = 0;
+		else
+			send_xchar(tty, START_CHAR(tty));
+	}
+
+ 	if (tty->termios->c_cflag & CRTSCTS) {
+		spin_lock_irqsave(&info->lock,flags);
+		info->serial_signals |= SerialSignal_RTS;
+	 	set_signals(info);
+		spin_unlock_irqrestore(&info->lock,flags);
+	}
+}
+
+/* set or clear transmit break condition
+ * break_state	-1=set break condition, 0=clear
+ */
+static void set_break(struct tty_struct *tty, int break_state)
+{
+	unsigned char RegValue;
+	SLMP_INFO * info = (SLMP_INFO *)tty->driver_data;
+	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s set_break(%d)\n",
+			 __FILE__,__LINE__, info->device_name, break_state);
+
+	if (sanity_check(info, tty->name, "set_break"))
+		return;
+
+	spin_lock_irqsave(&info->lock,flags);
+	RegValue = read_reg(info, CTL);
+ 	if (break_state == -1)
+		RegValue |= BIT3;
+	else
+		RegValue &= ~BIT3;
+	write_reg(info, CTL, RegValue);
+	spin_unlock_irqrestore(&info->lock,flags);
+}
+
+#ifdef CONFIG_HDLC
+
+/**
+ * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
+ * set encoding and frame check sequence (FCS) options
+ *
+ * dev       pointer to network device structure
+ * encoding  serial encoding setting
+ * parity    FCS setting
+ *
+ * returns 0 if success, otherwise error code
+ */
+static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
+			  unsigned short parity)
+{
+	SLMP_INFO *info = dev_to_port(dev);
+	unsigned char  new_encoding;
+	unsigned short new_crctype;
+
+	/* return error if TTY interface open */
+	if (info->count)
+		return -EBUSY;
+
+	switch (encoding)
+	{
+	case ENCODING_NRZ:        new_encoding = HDLC_ENCODING_NRZ; break;
+	case ENCODING_NRZI:       new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
+	case ENCODING_FM_MARK:    new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
+	case ENCODING_FM_SPACE:   new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
+	case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
+	default: return -EINVAL;
+	}
+
+	switch (parity)
+	{
+	case PARITY_NONE:            new_crctype = HDLC_CRC_NONE; break;
+	case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
+	case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
+	default: return -EINVAL;
+	}
+
+	info->params.encoding = new_encoding;
+	info->params.crc_type = new_crctype;;
+
+	/* if network interface up, reprogram hardware */
+	if (info->netcount)
+		program_hw(info);
+
+	return 0;
+}
+
+/**
+ * called by generic HDLC layer to send frame
+ *
+ * skb  socket buffer containing HDLC frame
+ * dev  pointer to network device structure
+ *
+ * returns 0 if success, otherwise error code
+ */
+static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	SLMP_INFO *info = dev_to_port(dev);
+	struct net_device_stats *stats = hdlc_stats(dev);
+	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name);
+
+	/* stop sending until this frame completes */
+	netif_stop_queue(dev);
+
+	/* copy data to device buffers */
+	info->tx_count = skb->len;
+	tx_load_dma_buffer(info, skb->data, skb->len);
+
+	/* update network statistics */
+	stats->tx_packets++;
+	stats->tx_bytes += skb->len;
+
+	/* done with socket buffer, so free it */
+	dev_kfree_skb(skb);
+
+	/* save start time for transmit timeout detection */
+	dev->trans_start = jiffies;
+
+	/* start hardware transmitter if necessary */
+	spin_lock_irqsave(&info->lock,flags);
+	if (!info->tx_active)
+	 	tx_start(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	return 0;
+}
+
+/**
+ * called by network layer when interface enabled
+ * claim resources and initialize hardware
+ *
+ * dev  pointer to network device structure
+ *
+ * returns 0 if success, otherwise error code
+ */
+static int hdlcdev_open(struct net_device *dev)
+{
+	SLMP_INFO *info = dev_to_port(dev);
+	int rc;
+	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name);
+
+	/* generic HDLC layer open processing */
+	if ((rc = hdlc_open(dev)))
+		return rc;
+
+	/* arbitrate between network and tty opens */
+	spin_lock_irqsave(&info->netlock, flags);
+	if (info->count != 0 || info->netcount != 0) {
+		printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
+		spin_unlock_irqrestore(&info->netlock, flags);
+		return -EBUSY;
+	}
+	info->netcount=1;
+	spin_unlock_irqrestore(&info->netlock, flags);
+
+	/* claim resources and init adapter */
+	if ((rc = startup(info)) != 0) {
+		spin_lock_irqsave(&info->netlock, flags);
+		info->netcount=0;
+		spin_unlock_irqrestore(&info->netlock, flags);
+		return rc;
+	}
+
+	/* assert DTR and RTS, apply hardware settings */
+	info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+	program_hw(info);
+
+	/* enable network layer transmit */
+	dev->trans_start = jiffies;
+	netif_start_queue(dev);
+
+	/* inform generic HDLC layer of current DCD status */
+	spin_lock_irqsave(&info->lock, flags);
+	get_signals(info);
+	spin_unlock_irqrestore(&info->lock, flags);
+	hdlc_set_carrier(info->serial_signals & SerialSignal_DCD, dev);
+
+	return 0;
+}
+
+/**
+ * called by network layer when interface is disabled
+ * shutdown hardware and release resources
+ *
+ * dev  pointer to network device structure
+ *
+ * returns 0 if success, otherwise error code
+ */
+static int hdlcdev_close(struct net_device *dev)
+{
+	SLMP_INFO *info = dev_to_port(dev);
+	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name);
+
+	netif_stop_queue(dev);
+
+	/* shutdown adapter and release resources */
+	shutdown(info);
+
+	hdlc_close(dev);
+
+	spin_lock_irqsave(&info->netlock, flags);
+	info->netcount=0;
+	spin_unlock_irqrestore(&info->netlock, flags);
+
+	return 0;
+}
+
+/**
+ * called by network layer to process IOCTL call to network device
+ *
+ * dev  pointer to network device structure
+ * ifr  pointer to network interface request structure
+ * cmd  IOCTL command code
+ *
+ * returns 0 if success, otherwise error code
+ */
+static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+	const size_t size = sizeof(sync_serial_settings);
+	sync_serial_settings new_line;
+	sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
+	SLMP_INFO *info = dev_to_port(dev);
+	unsigned int flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
+
+	/* return error if TTY interface open */
+	if (info->count)
+		return -EBUSY;
+
+	if (cmd != SIOCWANDEV)
+		return hdlc_ioctl(dev, ifr, cmd);
+
+	switch(ifr->ifr_settings.type) {
+	case IF_GET_IFACE: /* return current sync_serial_settings */
+
+		ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
+		if (ifr->ifr_settings.size < size) {
+			ifr->ifr_settings.size = size; /* data size wanted */
+			return -ENOBUFS;
+		}
+
+		flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
+					      HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
+					      HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
+					      HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
+
+		switch (flags){
+		case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
+		case (HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_INT; break;
+		case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_TXINT; break;
+		case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
+		default: new_line.clock_type = CLOCK_DEFAULT;
+		}
+
+		new_line.clock_rate = info->params.clock_speed;
+		new_line.loopback   = info->params.loopback ? 1:0;
+
+		if (copy_to_user(line, &new_line, size))
+			return -EFAULT;
+		return 0;
+
+	case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
+
+		if(!capable(CAP_NET_ADMIN))
+			return -EPERM;
+		if (copy_from_user(&new_line, line, size))
+			return -EFAULT;
+
+		switch (new_line.clock_type)
+		{
+		case CLOCK_EXT:      flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
+		case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
+		case CLOCK_INT:      flags = HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG;    break;
+		case CLOCK_TXINT:    flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG;    break;
+		case CLOCK_DEFAULT:  flags = info->params.flags &
+					     (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
+					      HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
+					      HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
+					      HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN); break;
+		default: return -EINVAL;
+		}
+
+		if (new_line.loopback != 0 && new_line.loopback != 1)
+			return -EINVAL;
+
+		info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
+					HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
+					HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
+					HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
+		info->params.flags |= flags;
+
+		info->params.loopback = new_line.loopback;
+
+		if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
+			info->params.clock_speed = new_line.clock_rate;
+		else
+			info->params.clock_speed = 0;
+
+		/* if network interface up, reprogram hardware */
+		if (info->netcount)
+			program_hw(info);
+		return 0;
+
+	default:
+		return hdlc_ioctl(dev, ifr, cmd);
+	}
+}
+
+/**
+ * called by network layer when transmit timeout is detected
+ *
+ * dev  pointer to network device structure
+ */
+static void hdlcdev_tx_timeout(struct net_device *dev)
+{
+	SLMP_INFO *info = dev_to_port(dev);
+	struct net_device_stats *stats = hdlc_stats(dev);
+	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("hdlcdev_tx_timeout(%s)\n",dev->name);
+
+	stats->tx_errors++;
+	stats->tx_aborted_errors++;
+
+	spin_lock_irqsave(&info->lock,flags);
+	tx_stop(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	netif_wake_queue(dev);
+}
+
+/**
+ * called by device driver when transmit completes
+ * reenable network layer transmit if stopped
+ *
+ * info  pointer to device instance information
+ */
+static void hdlcdev_tx_done(SLMP_INFO *info)
+{
+	if (netif_queue_stopped(info->netdev))
+		netif_wake_queue(info->netdev);
+}
+
+/**
+ * called by device driver when frame received
+ * pass frame to network layer
+ *
+ * info  pointer to device instance information
+ * buf   pointer to buffer contianing frame data
+ * size  count of data bytes in buf
+ */
+static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size)
+{
+	struct sk_buff *skb = dev_alloc_skb(size);
+	struct net_device *dev = info->netdev;
+	struct net_device_stats *stats = hdlc_stats(dev);
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("hdlcdev_rx(%s)\n",dev->name);
+
+	if (skb == NULL) {
+		printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n", dev->name);
+		stats->rx_dropped++;
+		return;
+	}
+
+	memcpy(skb_put(skb, size),buf,size);
+
+	skb->protocol = hdlc_type_trans(skb, info->netdev);
+
+	stats->rx_packets++;
+	stats->rx_bytes += size;
+
+	netif_rx(skb);
+
+	info->netdev->last_rx = jiffies;
+}
+
+/**
+ * called by device driver when adding device instance
+ * do generic HDLC initialization
+ *
+ * info  pointer to device instance information
+ *
+ * returns 0 if success, otherwise error code
+ */
+static int hdlcdev_init(SLMP_INFO *info)
+{
+	int rc;
+	struct net_device *dev;
+	hdlc_device *hdlc;
+
+	/* allocate and initialize network and HDLC layer objects */
+
+	if (!(dev = alloc_hdlcdev(info))) {
+		printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__);
+		return -ENOMEM;
+	}
+
+	/* for network layer reporting purposes only */
+	dev->mem_start = info->phys_sca_base;
+	dev->mem_end   = info->phys_sca_base + SCA_BASE_SIZE - 1;
+	dev->irq       = info->irq_level;
+
+	/* network layer callbacks and settings */
+	dev->do_ioctl       = hdlcdev_ioctl;
+	dev->open           = hdlcdev_open;
+	dev->stop           = hdlcdev_close;
+	dev->tx_timeout     = hdlcdev_tx_timeout;
+	dev->watchdog_timeo = 10*HZ;
+	dev->tx_queue_len   = 50;
+
+	/* generic HDLC layer callbacks and settings */
+	hdlc         = dev_to_hdlc(dev);
+	hdlc->attach = hdlcdev_attach;
+	hdlc->xmit   = hdlcdev_xmit;
+
+	/* register objects with HDLC layer */
+	if ((rc = register_hdlc_device(dev))) {
+		printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
+		free_netdev(dev);
+		return rc;
+	}
+
+	info->netdev = dev;
+	return 0;
+}
+
+/**
+ * called by device driver when removing device instance
+ * do generic HDLC cleanup
+ *
+ * info  pointer to device instance information
+ */
+static void hdlcdev_exit(SLMP_INFO *info)
+{
+	unregister_hdlc_device(info->netdev);
+	free_netdev(info->netdev);
+	info->netdev = NULL;
+}
+
+#endif /* CONFIG_HDLC */
+
+
+/* Return next bottom half action to perform.
+ * Return Value:	BH action code or 0 if nothing to do.
+ */
+int bh_action(SLMP_INFO *info)
+{
+	unsigned long flags;
+	int rc = 0;
+
+	spin_lock_irqsave(&info->lock,flags);
+
+	if (info->pending_bh & BH_RECEIVE) {
+		info->pending_bh &= ~BH_RECEIVE;
+		rc = BH_RECEIVE;
+	} else if (info->pending_bh & BH_TRANSMIT) {
+		info->pending_bh &= ~BH_TRANSMIT;
+		rc = BH_TRANSMIT;
+	} else if (info->pending_bh & BH_STATUS) {
+		info->pending_bh &= ~BH_STATUS;
+		rc = BH_STATUS;
+	}
+
+	if (!rc) {
+		/* Mark BH routine as complete */
+		info->bh_running   = 0;
+		info->bh_requested = 0;
+	}
+
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	return rc;
+}
+
+/* Perform bottom half processing of work items queued by ISR.
+ */
+void bh_handler(void* Context)
+{
+	SLMP_INFO *info = (SLMP_INFO*)Context;
+	int action;
+
+	if (!info)
+		return;
+
+	if ( debug_level >= DEBUG_LEVEL_BH )
+		printk( "%s(%d):%s bh_handler() entry\n",
+			__FILE__,__LINE__,info->device_name);
+
+	info->bh_running = 1;
+
+	while((action = bh_action(info)) != 0) {
+
+		/* Process work item */
+		if ( debug_level >= DEBUG_LEVEL_BH )
+			printk( "%s(%d):%s bh_handler() work item action=%d\n",
+				__FILE__,__LINE__,info->device_name, action);
+
+		switch (action) {
+
+		case BH_RECEIVE:
+			bh_receive(info);
+			break;
+		case BH_TRANSMIT:
+			bh_transmit(info);
+			break;
+		case BH_STATUS:
+			bh_status(info);
+			break;
+		default:
+			/* unknown work item ID */
+			printk("%s(%d):%s Unknown work item ID=%08X!\n",
+				__FILE__,__LINE__,info->device_name,action);
+			break;
+		}
+	}
+
+	if ( debug_level >= DEBUG_LEVEL_BH )
+		printk( "%s(%d):%s bh_handler() exit\n",
+			__FILE__,__LINE__,info->device_name);
+}
+
+void bh_receive(SLMP_INFO *info)
+{
+	if ( debug_level >= DEBUG_LEVEL_BH )
+		printk( "%s(%d):%s bh_receive()\n",
+			__FILE__,__LINE__,info->device_name);
+
+	while( rx_get_frame(info) );
+}
+
+void bh_transmit(SLMP_INFO *info)
+{
+	struct tty_struct *tty = info->tty;
+
+	if ( debug_level >= DEBUG_LEVEL_BH )
+		printk( "%s(%d):%s bh_transmit() entry\n",
+			__FILE__,__LINE__,info->device_name);
+
+	if (tty) {
+		tty_wakeup(tty);
+		wake_up_interruptible(&tty->write_wait);
+	}
+}
+
+void bh_status(SLMP_INFO *info)
+{
+	if ( debug_level >= DEBUG_LEVEL_BH )
+		printk( "%s(%d):%s bh_status() entry\n",
+			__FILE__,__LINE__,info->device_name);
+
+	info->ri_chkcount = 0;
+	info->dsr_chkcount = 0;
+	info->dcd_chkcount = 0;
+	info->cts_chkcount = 0;
+}
+
+void isr_timer(SLMP_INFO * info)
+{
+	unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
+
+	/* IER2<7..4> = timer<3..0> interrupt enables (0=disabled) */
+	write_reg(info, IER2, 0);
+
+	/* TMCS, Timer Control/Status Register
+	 *
+	 * 07      CMF, Compare match flag (read only) 1=match
+	 * 06      ECMI, CMF Interrupt Enable: 0=disabled
+	 * 05      Reserved, must be 0
+	 * 04      TME, Timer Enable
+	 * 03..00  Reserved, must be 0
+	 *
+	 * 0000 0000
+	 */
+	write_reg(info, (unsigned char)(timer + TMCS), 0);
+
+	info->irq_occurred = TRUE;
+
+	if ( debug_level >= DEBUG_LEVEL_ISR )
+		printk("%s(%d):%s isr_timer()\n",
+			__FILE__,__LINE__,info->device_name);
+}
+
+void isr_rxint(SLMP_INFO * info)
+{
+ 	struct tty_struct *tty = info->tty;
+ 	struct	mgsl_icount *icount = &info->icount;
+	unsigned char status = read_reg(info, SR1) & info->ie1_value & (FLGD + IDLD + CDCD + BRKD);
+	unsigned char status2 = read_reg(info, SR2) & info->ie2_value & OVRN;
+
+	/* clear status bits */
+	if (status)
+		write_reg(info, SR1, status);
+
+	if (status2)
+		write_reg(info, SR2, status2);
+	
+	if ( debug_level >= DEBUG_LEVEL_ISR )
+		printk("%s(%d):%s isr_rxint status=%02X %02x\n",
+			__FILE__,__LINE__,info->device_name,status,status2);
+
+	if (info->params.mode == MGSL_MODE_ASYNC) {
+		if (status & BRKD) {
+			icount->brk++;
+
+			/* process break detection if tty control
+			 * is not set to ignore it
+			 */
+			if ( tty ) {
+				if (!(status & info->ignore_status_mask1)) {
+					if (info->read_status_mask1 & BRKD) {
+						*tty->flip.flag_buf_ptr = TTY_BREAK;
+						if (info->flags & ASYNC_SAK)
+							do_SAK(tty);
+					}
+				}
+			}
+		}
+	}
+	else {
+		if (status & (FLGD|IDLD)) {
+			if (status & FLGD)
+				info->icount.exithunt++;
+			else if (status & IDLD)
+				info->icount.rxidle++;
+			wake_up_interruptible(&info->event_wait_q);
+		}
+	}
+
+	if (status & CDCD) {
+		/* simulate a common modem status change interrupt
+		 * for our handler
+		 */
+		get_signals( info );
+		isr_io_pin(info,
+			MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD));
+	}
+}
+
+/*
+ * handle async rx data interrupts
+ */
+void isr_rxrdy(SLMP_INFO * info)
+{
+	u16 status;
+	unsigned char DataByte;
+ 	struct tty_struct *tty = info->tty;
+ 	struct	mgsl_icount *icount = &info->icount;
+
+	if ( debug_level >= DEBUG_LEVEL_ISR )
+		printk("%s(%d):%s isr_rxrdy\n",
+			__FILE__,__LINE__,info->device_name);
+
+	while((status = read_reg(info,CST0)) & BIT0)
+	{
+		DataByte = read_reg(info,TRB);
+
+		if ( tty ) {
+			if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+				continue;
+
+			*tty->flip.char_buf_ptr = DataByte;
+			*tty->flip.flag_buf_ptr = 0;
+		}
+
+		icount->rx++;
+
+		if ( status & (PE + FRME + OVRN) ) {
+			printk("%s(%d):%s rxerr=%04X\n",
+				__FILE__,__LINE__,info->device_name,status);
+
+			/* update error statistics */
+			if (status & PE)
+				icount->parity++;
+			else if (status & FRME)
+				icount->frame++;
+			else if (status & OVRN)
+				icount->overrun++;
+
+			/* discard char if tty control flags say so */
+			if (status & info->ignore_status_mask2)
+				continue;
+
+			status &= info->read_status_mask2;
+
+			if ( tty ) {
+				if (status & PE)
+					*tty->flip.flag_buf_ptr = TTY_PARITY;
+				else if (status & FRME)
+					*tty->flip.flag_buf_ptr = TTY_FRAME;
+				if (status & OVRN) {
+					/* Overrun is special, since it's
+					 * reported immediately, and doesn't
+					 * affect the current character
+					 */
+					if (tty->flip.count < TTY_FLIPBUF_SIZE) {
+						tty->flip.count++;
+						tty->flip.flag_buf_ptr++;
+						tty->flip.char_buf_ptr++;
+						*tty->flip.flag_buf_ptr = TTY_OVERRUN;
+					}
+				}
+			}
+		}	/* end of if (error) */
+
+		if ( tty ) {
+			tty->flip.flag_buf_ptr++;
+			tty->flip.char_buf_ptr++;
+			tty->flip.count++;
+		}
+	}
+
+	if ( debug_level >= DEBUG_LEVEL_ISR ) {
+		printk("%s(%d):%s isr_rxrdy() flip count=%d\n",
+			__FILE__,__LINE__,info->device_name,
+			tty ? tty->flip.count : 0);
+		printk("%s(%d):%s rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
+			__FILE__,__LINE__,info->device_name,
+			icount->rx,icount->brk,icount->parity,
+			icount->frame,icount->overrun);
+	}
+
+	if ( tty && tty->flip.count )
+		tty_flip_buffer_push(tty);
+}
+
+static void isr_txeom(SLMP_INFO * info, unsigned char status)
+{
+	if ( debug_level >= DEBUG_LEVEL_ISR )
+		printk("%s(%d):%s isr_txeom status=%02x\n",
+			__FILE__,__LINE__,info->device_name,status);
+
+	write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */
+	write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */
+	write_reg(info, TXDMA + DCMD, SWABORT);	/* reset/init DMA channel */
+
+	if (status & UDRN) {
+		write_reg(info, CMD, TXRESET);
+		write_reg(info, CMD, TXENABLE);
+	} else
+		write_reg(info, CMD, TXBUFCLR);
+
+	/* disable and clear tx interrupts */
+	info->ie0_value &= ~TXRDYE;
+	info->ie1_value &= ~(IDLE + UDRN);
+	write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value));
+	write_reg(info, SR1, (unsigned char)(UDRN + IDLE));
+
+	if ( info->tx_active ) {
+		if (info->params.mode != MGSL_MODE_ASYNC) {
+			if (status & UDRN)
+				info->icount.txunder++;
+			else if (status & IDLE)
+				info->icount.txok++;
+		}
+
+		info->tx_active = 0;
+		info->tx_count = info->tx_put = info->tx_get = 0;
+
+		del_timer(&info->tx_timer);
+
+		if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done ) {
+			info->serial_signals &= ~SerialSignal_RTS;
+			info->drop_rts_on_tx_done = 0;
+			set_signals(info);
+		}
+
+#ifdef CONFIG_HDLC
+		if (info->netcount)
+			hdlcdev_tx_done(info);
+		else
+#endif
+		{
+			if (info->tty && (info->tty->stopped || info->tty->hw_stopped)) {
+				tx_stop(info);
+				return;
+			}
+			info->pending_bh |= BH_TRANSMIT;
+		}
+	}
+}
+
+
+/*
+ * handle tx status interrupts
+ */
+void isr_txint(SLMP_INFO * info)
+{
+	unsigned char status = read_reg(info, SR1) & info->ie1_value & (UDRN + IDLE + CCTS);
+
+	/* clear status bits */
+	write_reg(info, SR1, status);
+
+	if ( debug_level >= DEBUG_LEVEL_ISR )
+		printk("%s(%d):%s isr_txint status=%02x\n",
+			__FILE__,__LINE__,info->device_name,status);
+
+	if (status & (UDRN + IDLE))
+		isr_txeom(info, status);
+
+	if (status & CCTS) {
+		/* simulate a common modem status change interrupt
+		 * for our handler
+		 */
+		get_signals( info );
+		isr_io_pin(info,
+			MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS));
+
+	}
+}
+
+/*
+ * handle async tx data interrupts
+ */
+void isr_txrdy(SLMP_INFO * info)
+{
+	if ( debug_level >= DEBUG_LEVEL_ISR )
+		printk("%s(%d):%s isr_txrdy() tx_count=%d\n",
+			__FILE__,__LINE__,info->device_name,info->tx_count);
+
+	if (info->params.mode != MGSL_MODE_ASYNC) {
+		/* disable TXRDY IRQ, enable IDLE IRQ */
+		info->ie0_value &= ~TXRDYE;
+		info->ie1_value |= IDLE;
+		write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value));
+		return;
+	}
+
+	if (info->tty && (info->tty->stopped || info->tty->hw_stopped)) {
+		tx_stop(info);
+		return;
+	}
+
+	if ( info->tx_count )
+		tx_load_fifo( info );
+	else {
+		info->tx_active = 0;
+		info->ie0_value &= ~TXRDYE;
+		write_reg(info, IE0, info->ie0_value);
+	}
+
+	if (info->tx_count < WAKEUP_CHARS)
+		info->pending_bh |= BH_TRANSMIT;
+}
+
+void isr_rxdmaok(SLMP_INFO * info)
+{
+	/* BIT7 = EOT (end of transfer)
+	 * BIT6 = EOM (end of message/frame)
+	 */
+	unsigned char status = read_reg(info,RXDMA + DSR) & 0xc0;
+
+	/* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
+	write_reg(info, RXDMA + DSR, (unsigned char)(status | 1));
+
+	if ( debug_level >= DEBUG_LEVEL_ISR )
+		printk("%s(%d):%s isr_rxdmaok(), status=%02x\n",
+			__FILE__,__LINE__,info->device_name,status);
+
+	info->pending_bh |= BH_RECEIVE;
+}
+
+void isr_rxdmaerror(SLMP_INFO * info)
+{
+	/* BIT5 = BOF (buffer overflow)
+	 * BIT4 = COF (counter overflow)
+	 */
+	unsigned char status = read_reg(info,RXDMA + DSR) & 0x30;
+
+	/* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
+	write_reg(info, RXDMA + DSR, (unsigned char)(status | 1));
+
+	if ( debug_level >= DEBUG_LEVEL_ISR )
+		printk("%s(%d):%s isr_rxdmaerror(), status=%02x\n",
+			__FILE__,__LINE__,info->device_name,status);
+
+	info->rx_overflow = TRUE;
+	info->pending_bh |= BH_RECEIVE;
+}
+
+void isr_txdmaok(SLMP_INFO * info)
+{
+	unsigned char status_reg1 = read_reg(info, SR1);
+
+	write_reg(info, TXDMA + DIR, 0x00);	/* disable Tx DMA IRQs */
+	write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */
+	write_reg(info, TXDMA + DCMD, SWABORT);	/* reset/init DMA channel */
+
+	if ( debug_level >= DEBUG_LEVEL_ISR )
+		printk("%s(%d):%s isr_txdmaok(), status=%02x\n",
+			__FILE__,__LINE__,info->device_name,status_reg1);
+
+	/* program TXRDY as FIFO empty flag, enable TXRDY IRQ */
+	write_reg16(info, TRC0, 0);
+	info->ie0_value |= TXRDYE;
+	write_reg(info, IE0, info->ie0_value);
+}
+
+void isr_txdmaerror(SLMP_INFO * info)
+{
+	/* BIT5 = BOF (buffer overflow)
+	 * BIT4 = COF (counter overflow)
+	 */
+	unsigned char status = read_reg(info,TXDMA + DSR) & 0x30;
+
+	/* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
+	write_reg(info, TXDMA + DSR, (unsigned char)(status | 1));
+
+	if ( debug_level >= DEBUG_LEVEL_ISR )
+		printk("%s(%d):%s isr_txdmaerror(), status=%02x\n",
+			__FILE__,__LINE__,info->device_name,status);
+}
+
+/* handle input serial signal changes
+ */
+void isr_io_pin( SLMP_INFO *info, u16 status )
+{
+ 	struct	mgsl_icount *icount;
+
+	if ( debug_level >= DEBUG_LEVEL_ISR )
+		printk("%s(%d):isr_io_pin status=%04X\n",
+			__FILE__,__LINE__,status);
+
+	if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED |
+	              MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) {
+		icount = &info->icount;
+		/* update input line counters */
+		if (status & MISCSTATUS_RI_LATCHED) {
+			icount->rng++;
+			if ( status & SerialSignal_RI )
+				info->input_signal_events.ri_up++;
+			else
+				info->input_signal_events.ri_down++;
+		}
+		if (status & MISCSTATUS_DSR_LATCHED) {
+			icount->dsr++;
+			if ( status & SerialSignal_DSR )
+				info->input_signal_events.dsr_up++;
+			else
+				info->input_signal_events.dsr_down++;
+		}
+		if (status & MISCSTATUS_DCD_LATCHED) {
+			if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) {
+				info->ie1_value &= ~CDCD;
+				write_reg(info, IE1, info->ie1_value);
+			}
+			icount->dcd++;
+			if (status & SerialSignal_DCD) {
+				info->input_signal_events.dcd_up++;
+			} else
+				info->input_signal_events.dcd_down++;
+#ifdef CONFIG_HDLC
+			if (info->netcount)
+				hdlc_set_carrier(status & SerialSignal_DCD, info->netdev);
+#endif
+		}
+		if (status & MISCSTATUS_CTS_LATCHED)
+		{
+			if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) {
+				info->ie1_value &= ~CCTS;
+				write_reg(info, IE1, info->ie1_value);
+			}
+			icount->cts++;
+			if ( status & SerialSignal_CTS )
+				info->input_signal_events.cts_up++;
+			else
+				info->input_signal_events.cts_down++;
+		}
+		wake_up_interruptible(&info->status_event_wait_q);
+		wake_up_interruptible(&info->event_wait_q);
+
+		if ( (info->flags & ASYNC_CHECK_CD) &&
+		     (status & MISCSTATUS_DCD_LATCHED) ) {
+			if ( debug_level >= DEBUG_LEVEL_ISR )
+				printk("%s CD now %s...", info->device_name,
+				       (status & SerialSignal_DCD) ? "on" : "off");
+			if (status & SerialSignal_DCD)
+				wake_up_interruptible(&info->open_wait);
+			else {
+				if ( debug_level >= DEBUG_LEVEL_ISR )
+					printk("doing serial hangup...");
+				if (info->tty)
+					tty_hangup(info->tty);
+			}
+		}
+
+		if ( (info->flags & ASYNC_CTS_FLOW) &&
+		     (status & MISCSTATUS_CTS_LATCHED) ) {
+			if ( info->tty ) {
+				if (info->tty->hw_stopped) {
+					if (status & SerialSignal_CTS) {
+						if ( debug_level >= DEBUG_LEVEL_ISR )
+							printk("CTS tx start...");
+			 			info->tty->hw_stopped = 0;
+						tx_start(info);
+						info->pending_bh |= BH_TRANSMIT;
+						return;
+					}
+				} else {
+					if (!(status & SerialSignal_CTS)) {
+						if ( debug_level >= DEBUG_LEVEL_ISR )
+							printk("CTS tx stop...");
+			 			info->tty->hw_stopped = 1;
+						tx_stop(info);
+					}
+				}
+			}
+		}
+	}
+
+	info->pending_bh |= BH_STATUS;
+}
+
+/* Interrupt service routine entry point.
+ *
+ * Arguments:
+ * 	irq		interrupt number that caused interrupt
+ * 	dev_id		device ID supplied during interrupt registration
+ * 	regs		interrupted processor context
+ */
+static irqreturn_t synclinkmp_interrupt(int irq, void *dev_id,
+					struct pt_regs *regs)
+{
+	SLMP_INFO * info;
+	unsigned char status, status0, status1=0;
+	unsigned char dmastatus, dmastatus0, dmastatus1=0;
+	unsigned char timerstatus0, timerstatus1=0;
+	unsigned char shift;
+	unsigned int i;
+	unsigned short tmp;
+
+	if ( debug_level >= DEBUG_LEVEL_ISR )
+		printk("%s(%d): synclinkmp_interrupt(%d)entry.\n",
+			__FILE__,__LINE__,irq);
+
+	info = (SLMP_INFO *)dev_id;
+	if (!info)
+		return IRQ_NONE;
+
+	spin_lock(&info->lock);
+
+	for(;;) {
+
+		/* get status for SCA0 (ports 0-1) */
+		tmp = read_reg16(info, ISR0);	/* get ISR0 and ISR1 in one read */
+		status0 = (unsigned char)tmp;
+		dmastatus0 = (unsigned char)(tmp>>8);
+		timerstatus0 = read_reg(info, ISR2);
+
+		if ( debug_level >= DEBUG_LEVEL_ISR )
+			printk("%s(%d):%s status0=%02x, dmastatus0=%02x, timerstatus0=%02x\n",
+				__FILE__,__LINE__,info->device_name,
+				status0,dmastatus0,timerstatus0);
+
+		if (info->port_count == 4) {
+			/* get status for SCA1 (ports 2-3) */
+			tmp = read_reg16(info->port_array[2], ISR0);
+			status1 = (unsigned char)tmp;
+			dmastatus1 = (unsigned char)(tmp>>8);
+			timerstatus1 = read_reg(info->port_array[2], ISR2);
+
+			if ( debug_level >= DEBUG_LEVEL_ISR )
+				printk("%s(%d):%s status1=%02x, dmastatus1=%02x, timerstatus1=%02x\n",
+					__FILE__,__LINE__,info->device_name,
+					status1,dmastatus1,timerstatus1);
+		}
+
+		if (!status0 && !dmastatus0 && !timerstatus0 &&
+			 !status1 && !dmastatus1 && !timerstatus1)
+			break;
+
+		for(i=0; i < info->port_count ; i++) {
+			if (info->port_array[i] == NULL)
+				continue;
+			if (i < 2) {
+				status = status0;
+				dmastatus = dmastatus0;
+			} else {
+				status = status1;
+				dmastatus = dmastatus1;
+			}
+
+			shift = i & 1 ? 4 :0;
+
+			if (status & BIT0 << shift)
+				isr_rxrdy(info->port_array[i]);
+			if (status & BIT1 << shift)
+				isr_txrdy(info->port_array[i]);
+			if (status & BIT2 << shift)
+				isr_rxint(info->port_array[i]);
+			if (status & BIT3 << shift)
+				isr_txint(info->port_array[i]);
+
+			if (dmastatus & BIT0 << shift)
+				isr_rxdmaerror(info->port_array[i]);
+			if (dmastatus & BIT1 << shift)
+				isr_rxdmaok(info->port_array[i]);
+			if (dmastatus & BIT2 << shift)
+				isr_txdmaerror(info->port_array[i]);
+			if (dmastatus & BIT3 << shift)
+				isr_txdmaok(info->port_array[i]);
+		}
+
+		if (timerstatus0 & (BIT5 | BIT4))
+			isr_timer(info->port_array[0]);
+		if (timerstatus0 & (BIT7 | BIT6))
+			isr_timer(info->port_array[1]);
+		if (timerstatus1 & (BIT5 | BIT4))
+			isr_timer(info->port_array[2]);
+		if (timerstatus1 & (BIT7 | BIT6))
+			isr_timer(info->port_array[3]);
+	}
+
+	for(i=0; i < info->port_count ; i++) {
+		SLMP_INFO * port = info->port_array[i];
+
+		/* Request bottom half processing if there's something
+		 * for it to do and the bh is not already running.
+		 *
+		 * Note: startup adapter diags require interrupts.
+		 * do not request bottom half processing if the
+		 * device is not open in a normal mode.
+		 */
+		if ( port && (port->count || port->netcount) &&
+		     port->pending_bh && !port->bh_running &&
+		     !port->bh_requested ) {
+			if ( debug_level >= DEBUG_LEVEL_ISR )
+				printk("%s(%d):%s queueing bh task.\n",
+					__FILE__,__LINE__,port->device_name);
+			schedule_work(&port->task);
+			port->bh_requested = 1;
+		}
+	}
+
+	spin_unlock(&info->lock);
+
+	if ( debug_level >= DEBUG_LEVEL_ISR )
+		printk("%s(%d):synclinkmp_interrupt(%d)exit.\n",
+			__FILE__,__LINE__,irq);
+	return IRQ_HANDLED;
+}
+
+/* Initialize and start device.
+ */
+static int startup(SLMP_INFO * info)
+{
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk("%s(%d):%s tx_releaseup()\n",__FILE__,__LINE__,info->device_name);
+
+	if (info->flags & ASYNC_INITIALIZED)
+		return 0;
+
+	if (!info->tx_buf) {
+		info->tx_buf = (unsigned char *)kmalloc(info->max_frame_size, GFP_KERNEL);
+		if (!info->tx_buf) {
+			printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
+				__FILE__,__LINE__,info->device_name);
+			return -ENOMEM;
+		}
+	}
+
+	info->pending_bh = 0;
+
+	/* program hardware for current parameters */
+	reset_port(info);
+
+	change_params(info);
+
+	info->status_timer.expires = jiffies + msecs_to_jiffies(10);
+	add_timer(&info->status_timer);
+
+	if (info->tty)
+		clear_bit(TTY_IO_ERROR, &info->tty->flags);
+
+	info->flags |= ASYNC_INITIALIZED;
+
+	return 0;
+}
+
+/* Called by close() and hangup() to shutdown hardware
+ */
+static void shutdown(SLMP_INFO * info)
+{
+	unsigned long flags;
+
+	if (!(info->flags & ASYNC_INITIALIZED))
+		return;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s synclinkmp_shutdown()\n",
+			 __FILE__,__LINE__, info->device_name );
+
+	/* clear status wait queue because status changes */
+	/* can't happen after shutting down the hardware */
+	wake_up_interruptible(&info->status_event_wait_q);
+	wake_up_interruptible(&info->event_wait_q);
+
+	del_timer(&info->tx_timer);
+	del_timer(&info->status_timer);
+
+	if (info->tx_buf) {
+		kfree(info->tx_buf);
+		info->tx_buf = NULL;
+	}
+
+	spin_lock_irqsave(&info->lock,flags);
+
+	reset_port(info);
+
+ 	if (!info->tty || info->tty->termios->c_cflag & HUPCL) {
+ 		info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
+		set_signals(info);
+	}
+
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	if (info->tty)
+		set_bit(TTY_IO_ERROR, &info->tty->flags);
+
+	info->flags &= ~ASYNC_INITIALIZED;
+}
+
+static void program_hw(SLMP_INFO *info)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->lock,flags);
+
+	rx_stop(info);
+	tx_stop(info);
+
+	info->tx_count = info->tx_put = info->tx_get = 0;
+
+	if (info->params.mode == MGSL_MODE_HDLC || info->netcount)
+		hdlc_mode(info);
+	else
+		async_mode(info);
+
+	set_signals(info);
+
+	info->dcd_chkcount = 0;
+	info->cts_chkcount = 0;
+	info->ri_chkcount = 0;
+	info->dsr_chkcount = 0;
+
+	info->ie1_value |= (CDCD|CCTS);
+	write_reg(info, IE1, info->ie1_value);
+
+	get_signals(info);
+
+	if (info->netcount || (info->tty && info->tty->termios->c_cflag & CREAD) )
+		rx_start(info);
+
+	spin_unlock_irqrestore(&info->lock,flags);
+}
+
+/* Reconfigure adapter based on new parameters
+ */
+static void change_params(SLMP_INFO *info)
+{
+	unsigned cflag;
+	int bits_per_char;
+
+	if (!info->tty || !info->tty->termios)
+		return;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s change_params()\n",
+			 __FILE__,__LINE__, info->device_name );
+
+	cflag = info->tty->termios->c_cflag;
+
+	/* if B0 rate (hangup) specified then negate DTR and RTS */
+	/* otherwise assert DTR and RTS */
+ 	if (cflag & CBAUD)
+		info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+	else
+		info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+
+	/* byte size and parity */
+
+	switch (cflag & CSIZE) {
+	      case CS5: info->params.data_bits = 5; break;
+	      case CS6: info->params.data_bits = 6; break;
+	      case CS7: info->params.data_bits = 7; break;
+	      case CS8: info->params.data_bits = 8; break;
+	      /* Never happens, but GCC is too dumb to figure it out */
+	      default:  info->params.data_bits = 7; break;
+	      }
+
+	if (cflag & CSTOPB)
+		info->params.stop_bits = 2;
+	else
+		info->params.stop_bits = 1;
+
+	info->params.parity = ASYNC_PARITY_NONE;
+	if (cflag & PARENB) {
+		if (cflag & PARODD)
+			info->params.parity = ASYNC_PARITY_ODD;
+		else
+			info->params.parity = ASYNC_PARITY_EVEN;
+#ifdef CMSPAR
+		if (cflag & CMSPAR)
+			info->params.parity = ASYNC_PARITY_SPACE;
+#endif
+	}
+
+	/* calculate number of jiffies to transmit a full
+	 * FIFO (32 bytes) at specified data rate
+	 */
+	bits_per_char = info->params.data_bits +
+			info->params.stop_bits + 1;
+
+	/* if port data rate is set to 460800 or less then
+	 * allow tty settings to override, otherwise keep the
+	 * current data rate.
+	 */
+	if (info->params.data_rate <= 460800) {
+		info->params.data_rate = tty_get_baud_rate(info->tty);
+	}
+
+	if ( info->params.data_rate ) {
+		info->timeout = (32*HZ*bits_per_char) /
+				info->params.data_rate;
+	}
+	info->timeout += HZ/50;		/* Add .02 seconds of slop */
+
+	if (cflag & CRTSCTS)
+		info->flags |= ASYNC_CTS_FLOW;
+	else
+		info->flags &= ~ASYNC_CTS_FLOW;
+
+	if (cflag & CLOCAL)
+		info->flags &= ~ASYNC_CHECK_CD;
+	else
+		info->flags |= ASYNC_CHECK_CD;
+
+	/* process tty input control flags */
+
+	info->read_status_mask2 = OVRN;
+	if (I_INPCK(info->tty))
+		info->read_status_mask2 |= PE | FRME;
+ 	if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
+ 		info->read_status_mask1 |= BRKD;
+	if (I_IGNPAR(info->tty))
+		info->ignore_status_mask2 |= PE | FRME;
+	if (I_IGNBRK(info->tty)) {
+		info->ignore_status_mask1 |= BRKD;
+		/* If ignoring parity and break indicators, ignore
+		 * overruns too.  (For real raw support).
+		 */
+		if (I_IGNPAR(info->tty))
+			info->ignore_status_mask2 |= OVRN;
+	}
+
+	program_hw(info);
+}
+
+static int get_stats(SLMP_INFO * info, struct mgsl_icount __user *user_icount)
+{
+	int err;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s get_params()\n",
+			 __FILE__,__LINE__, info->device_name);
+
+	COPY_TO_USER(err,user_icount, &info->icount, sizeof(struct mgsl_icount));
+	if (err) {
+		if ( debug_level >= DEBUG_LEVEL_INFO )
+			printk( "%s(%d):%s get_stats() user buffer copy failed\n",
+				__FILE__,__LINE__,info->device_name);
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+static int get_params(SLMP_INFO * info, MGSL_PARAMS __user *user_params)
+{
+	int err;
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s get_params()\n",
+			 __FILE__,__LINE__, info->device_name);
+
+	COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
+	if (err) {
+		if ( debug_level >= DEBUG_LEVEL_INFO )
+			printk( "%s(%d):%s get_params() user buffer copy failed\n",
+				__FILE__,__LINE__,info->device_name);
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+static int set_params(SLMP_INFO * info, MGSL_PARAMS __user *new_params)
+{
+ 	unsigned long flags;
+	MGSL_PARAMS tmp_params;
+	int err;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s set_params\n",
+			__FILE__,__LINE__,info->device_name );
+	COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
+	if (err) {
+		if ( debug_level >= DEBUG_LEVEL_INFO )
+			printk( "%s(%d):%s set_params() user buffer copy failed\n",
+				__FILE__,__LINE__,info->device_name);
+		return -EFAULT;
+	}
+
+	spin_lock_irqsave(&info->lock,flags);
+	memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
+	spin_unlock_irqrestore(&info->lock,flags);
+
+ 	change_params(info);
+
+	return 0;
+}
+
+static int get_txidle(SLMP_INFO * info, int __user *idle_mode)
+{
+	int err;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s get_txidle()=%d\n",
+			 __FILE__,__LINE__, info->device_name, info->idle_mode);
+
+	COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
+	if (err) {
+		if ( debug_level >= DEBUG_LEVEL_INFO )
+			printk( "%s(%d):%s get_txidle() user buffer copy failed\n",
+				__FILE__,__LINE__,info->device_name);
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+static int set_txidle(SLMP_INFO * info, int idle_mode)
+{
+ 	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s set_txidle(%d)\n",
+			__FILE__,__LINE__,info->device_name, idle_mode );
+
+	spin_lock_irqsave(&info->lock,flags);
+	info->idle_mode = idle_mode;
+	tx_set_idle( info );
+	spin_unlock_irqrestore(&info->lock,flags);
+	return 0;
+}
+
+static int tx_enable(SLMP_INFO * info, int enable)
+{
+ 	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s tx_enable(%d)\n",
+			__FILE__,__LINE__,info->device_name, enable);
+
+	spin_lock_irqsave(&info->lock,flags);
+	if ( enable ) {
+		if ( !info->tx_enabled ) {
+			tx_start(info);
+		}
+	} else {
+		if ( info->tx_enabled )
+			tx_stop(info);
+	}
+	spin_unlock_irqrestore(&info->lock,flags);
+	return 0;
+}
+
+/* abort send HDLC frame
+ */
+static int tx_abort(SLMP_INFO * info)
+{
+ 	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s tx_abort()\n",
+			__FILE__,__LINE__,info->device_name);
+
+	spin_lock_irqsave(&info->lock,flags);
+	if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC ) {
+		info->ie1_value &= ~UDRN;
+		info->ie1_value |= IDLE;
+		write_reg(info, IE1, info->ie1_value);	/* disable tx status interrupts */
+		write_reg(info, SR1, (unsigned char)(IDLE + UDRN));	/* clear pending */
+
+		write_reg(info, TXDMA + DSR, 0);		/* disable DMA channel */
+		write_reg(info, TXDMA + DCMD, SWABORT);	/* reset/init DMA channel */
+
+   		write_reg(info, CMD, TXABORT);
+	}
+	spin_unlock_irqrestore(&info->lock,flags);
+	return 0;
+}
+
+static int rx_enable(SLMP_INFO * info, int enable)
+{
+ 	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s rx_enable(%d)\n",
+			__FILE__,__LINE__,info->device_name,enable);
+
+	spin_lock_irqsave(&info->lock,flags);
+	if ( enable ) {
+		if ( !info->rx_enabled )
+			rx_start(info);
+	} else {
+		if ( info->rx_enabled )
+			rx_stop(info);
+	}
+	spin_unlock_irqrestore(&info->lock,flags);
+	return 0;
+}
+
+static int map_status(int signals)
+{
+	/* Map status bits to API event bits */
+
+	return ((signals & SerialSignal_DSR) ? MgslEvent_DsrActive : MgslEvent_DsrInactive) +
+	       ((signals & SerialSignal_CTS) ? MgslEvent_CtsActive : MgslEvent_CtsInactive) +
+	       ((signals & SerialSignal_DCD) ? MgslEvent_DcdActive : MgslEvent_DcdInactive) +
+	       ((signals & SerialSignal_RI)  ? MgslEvent_RiActive : MgslEvent_RiInactive);
+}
+
+/* wait for specified event to occur
+ */
+static int wait_mgsl_event(SLMP_INFO * info, int __user *mask_ptr)
+{
+ 	unsigned long flags;
+	int s;
+	int rc=0;
+	struct mgsl_icount cprev, cnow;
+	int events;
+	int mask;
+	struct	_input_signal_events oldsigs, newsigs;
+	DECLARE_WAITQUEUE(wait, current);
+
+	COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
+	if (rc) {
+		return  -EFAULT;
+	}
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s wait_mgsl_event(%d)\n",
+			__FILE__,__LINE__,info->device_name,mask);
+
+	spin_lock_irqsave(&info->lock,flags);
+
+	/* return immediately if state matches requested events */
+	get_signals(info);
+	s = map_status(info->serial_signals);
+
+	events = mask &
+		( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
+ 		  ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
+		  ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
+		  ((s & SerialSignal_RI)  ? MgslEvent_RiActive :MgslEvent_RiInactive) );
+	if (events) {
+		spin_unlock_irqrestore(&info->lock,flags);
+		goto exit;
+	}
+
+	/* save current irq counts */
+	cprev = info->icount;
+	oldsigs = info->input_signal_events;
+
+	/* enable hunt and idle irqs if needed */
+	if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) {
+		unsigned char oldval = info->ie1_value;
+		unsigned char newval = oldval +
+			 (mask & MgslEvent_ExitHuntMode ? FLGD:0) +
+			 (mask & MgslEvent_IdleReceived ? IDLD:0);
+		if ( oldval != newval ) {
+			info->ie1_value = newval;
+			write_reg(info, IE1, info->ie1_value);
+		}
+	}
+
+	set_current_state(TASK_INTERRUPTIBLE);
+	add_wait_queue(&info->event_wait_q, &wait);
+
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	for(;;) {
+		schedule();
+		if (signal_pending(current)) {
+			rc = -ERESTARTSYS;
+			break;
+		}
+
+		/* get current irq counts */
+		spin_lock_irqsave(&info->lock,flags);
+		cnow = info->icount;
+		newsigs = info->input_signal_events;
+		set_current_state(TASK_INTERRUPTIBLE);
+		spin_unlock_irqrestore(&info->lock,flags);
+
+		/* if no change, wait aborted for some reason */
+		if (newsigs.dsr_up   == oldsigs.dsr_up   &&
+		    newsigs.dsr_down == oldsigs.dsr_down &&
+		    newsigs.dcd_up   == oldsigs.dcd_up   &&
+		    newsigs.dcd_down == oldsigs.dcd_down &&
+		    newsigs.cts_up   == oldsigs.cts_up   &&
+		    newsigs.cts_down == oldsigs.cts_down &&
+		    newsigs.ri_up    == oldsigs.ri_up    &&
+		    newsigs.ri_down  == oldsigs.ri_down  &&
+		    cnow.exithunt    == cprev.exithunt   &&
+		    cnow.rxidle      == cprev.rxidle) {
+			rc = -EIO;
+			break;
+		}
+
+		events = mask &
+			( (newsigs.dsr_up   != oldsigs.dsr_up   ? MgslEvent_DsrActive:0)   +
+			  (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
+			  (newsigs.dcd_up   != oldsigs.dcd_up   ? MgslEvent_DcdActive:0)   +
+			  (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
+			  (newsigs.cts_up   != oldsigs.cts_up   ? MgslEvent_CtsActive:0)   +
+			  (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
+			  (newsigs.ri_up    != oldsigs.ri_up    ? MgslEvent_RiActive:0)    +
+			  (newsigs.ri_down  != oldsigs.ri_down  ? MgslEvent_RiInactive:0)  +
+			  (cnow.exithunt    != cprev.exithunt   ? MgslEvent_ExitHuntMode:0) +
+			  (cnow.rxidle      != cprev.rxidle     ? MgslEvent_IdleReceived:0) );
+		if (events)
+			break;
+
+		cprev = cnow;
+		oldsigs = newsigs;
+	}
+
+	remove_wait_queue(&info->event_wait_q, &wait);
+	set_current_state(TASK_RUNNING);
+
+
+	if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
+		spin_lock_irqsave(&info->lock,flags);
+		if (!waitqueue_active(&info->event_wait_q)) {
+			/* disable enable exit hunt mode/idle rcvd IRQs */
+			info->ie1_value &= ~(FLGD|IDLD);
+			write_reg(info, IE1, info->ie1_value);
+		}
+		spin_unlock_irqrestore(&info->lock,flags);
+	}
+exit:
+	if ( rc == 0 )
+		PUT_USER(rc, events, mask_ptr);
+
+	return rc;
+}
+
+static int modem_input_wait(SLMP_INFO *info,int arg)
+{
+ 	unsigned long flags;
+	int rc;
+	struct mgsl_icount cprev, cnow;
+	DECLARE_WAITQUEUE(wait, current);
+
+	/* save current irq counts */
+	spin_lock_irqsave(&info->lock,flags);
+	cprev = info->icount;
+	add_wait_queue(&info->status_event_wait_q, &wait);
+	set_current_state(TASK_INTERRUPTIBLE);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	for(;;) {
+		schedule();
+		if (signal_pending(current)) {
+			rc = -ERESTARTSYS;
+			break;
+		}
+
+		/* get new irq counts */
+		spin_lock_irqsave(&info->lock,flags);
+		cnow = info->icount;
+		set_current_state(TASK_INTERRUPTIBLE);
+		spin_unlock_irqrestore(&info->lock,flags);
+
+		/* if no change, wait aborted for some reason */
+		if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
+		    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
+			rc = -EIO;
+			break;
+		}
+
+		/* check for change in caller specified modem input */
+		if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
+		    (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
+		    (arg & TIOCM_CD  && cnow.dcd != cprev.dcd) ||
+		    (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
+			rc = 0;
+			break;
+		}
+
+		cprev = cnow;
+	}
+	remove_wait_queue(&info->status_event_wait_q, &wait);
+	set_current_state(TASK_RUNNING);
+	return rc;
+}
+
+/* return the state of the serial control and status signals
+ */
+static int tiocmget(struct tty_struct *tty, struct file *file)
+{
+	SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
+	unsigned int result;
+ 	unsigned long flags;
+
+	spin_lock_irqsave(&info->lock,flags);
+ 	get_signals(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
+		((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
+		((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
+		((info->serial_signals & SerialSignal_RI)  ? TIOCM_RNG:0) +
+		((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
+		((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0);
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s tiocmget() value=%08X\n",
+			 __FILE__,__LINE__, info->device_name, result );
+	return result;
+}
+
+/* set modem control signals (DTR/RTS)
+ */
+static int tiocmset(struct tty_struct *tty, struct file *file,
+		    unsigned int set, unsigned int clear)
+{
+	SLMP_INFO *info = (SLMP_INFO *)tty->driver_data;
+ 	unsigned long flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s tiocmset(%x,%x)\n",
+			__FILE__,__LINE__,info->device_name, set, clear);
+
+	if (set & TIOCM_RTS)
+		info->serial_signals |= SerialSignal_RTS;
+	if (set & TIOCM_DTR)
+		info->serial_signals |= SerialSignal_DTR;
+	if (clear & TIOCM_RTS)
+		info->serial_signals &= ~SerialSignal_RTS;
+	if (clear & TIOCM_DTR)
+		info->serial_signals &= ~SerialSignal_DTR;
+
+	spin_lock_irqsave(&info->lock,flags);
+ 	set_signals(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	return 0;
+}
+
+
+
+/* Block the current process until the specified port is ready to open.
+ */
+static int block_til_ready(struct tty_struct *tty, struct file *filp,
+			   SLMP_INFO *info)
+{
+	DECLARE_WAITQUEUE(wait, current);
+	int		retval;
+	int		do_clocal = 0, extra_count = 0;
+	unsigned long	flags;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s block_til_ready()\n",
+			 __FILE__,__LINE__, tty->driver->name );
+
+	if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
+		/* nonblock mode is set or port is not enabled */
+		/* just verify that callout device is not active */
+		info->flags |= ASYNC_NORMAL_ACTIVE;
+		return 0;
+	}
+
+	if (tty->termios->c_cflag & CLOCAL)
+		do_clocal = 1;
+
+	/* Wait for carrier detect and the line to become
+	 * free (i.e., not in use by the callout).  While we are in
+	 * this loop, info->count is dropped by one, so that
+	 * close() knows when to free things.  We restore it upon
+	 * exit, either normal or abnormal.
+	 */
+
+	retval = 0;
+	add_wait_queue(&info->open_wait, &wait);
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s block_til_ready() before block, count=%d\n",
+			 __FILE__,__LINE__, tty->driver->name, info->count );
+
+	spin_lock_irqsave(&info->lock, flags);
+	if (!tty_hung_up_p(filp)) {
+		extra_count = 1;
+		info->count--;
+	}
+	spin_unlock_irqrestore(&info->lock, flags);
+	info->blocked_open++;
+
+	while (1) {
+		if ((tty->termios->c_cflag & CBAUD)) {
+			spin_lock_irqsave(&info->lock,flags);
+			info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+		 	set_signals(info);
+			spin_unlock_irqrestore(&info->lock,flags);
+		}
+
+		set_current_state(TASK_INTERRUPTIBLE);
+
+		if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)){
+			retval = (info->flags & ASYNC_HUP_NOTIFY) ?
+					-EAGAIN : -ERESTARTSYS;
+			break;
+		}
+
+		spin_lock_irqsave(&info->lock,flags);
+	 	get_signals(info);
+		spin_unlock_irqrestore(&info->lock,flags);
+
+ 		if (!(info->flags & ASYNC_CLOSING) &&
+ 		    (do_clocal || (info->serial_signals & SerialSignal_DCD)) ) {
+ 			break;
+		}
+
+		if (signal_pending(current)) {
+			retval = -ERESTARTSYS;
+			break;
+		}
+
+		if (debug_level >= DEBUG_LEVEL_INFO)
+			printk("%s(%d):%s block_til_ready() count=%d\n",
+				 __FILE__,__LINE__, tty->driver->name, info->count );
+
+		schedule();
+	}
+
+	set_current_state(TASK_RUNNING);
+	remove_wait_queue(&info->open_wait, &wait);
+
+	if (extra_count)
+		info->count++;
+	info->blocked_open--;
+
+	if (debug_level >= DEBUG_LEVEL_INFO)
+		printk("%s(%d):%s block_til_ready() after, count=%d\n",
+			 __FILE__,__LINE__, tty->driver->name, info->count );
+
+	if (!retval)
+		info->flags |= ASYNC_NORMAL_ACTIVE;
+
+	return retval;
+}
+
+int alloc_dma_bufs(SLMP_INFO *info)
+{
+	unsigned short BuffersPerFrame;
+	unsigned short BufferCount;
+
+	// Force allocation to start at 64K boundary for each port.
+	// This is necessary because *all* buffer descriptors for a port
+	// *must* be in the same 64K block. All descriptors on a port
+	// share a common 'base' address (upper 8 bits of 24 bits) programmed
+	// into the CBP register.
+	info->port_array[0]->last_mem_alloc = (SCA_MEM_SIZE/4) * info->port_num;
+
+	/* Calculate the number of DMA buffers necessary to hold the */
+	/* largest allowable frame size. Note: If the max frame size is */
+	/* not an even multiple of the DMA buffer size then we need to */
+	/* round the buffer count per frame up one. */
+
+	BuffersPerFrame = (unsigned short)(info->max_frame_size/SCABUFSIZE);
+	if ( info->max_frame_size % SCABUFSIZE )
+		BuffersPerFrame++;
+
+	/* calculate total number of data buffers (SCABUFSIZE) possible
+	 * in one ports memory (SCA_MEM_SIZE/4) after allocating memory
+	 * for the descriptor list (BUFFERLISTSIZE).
+	 */
+	BufferCount = (SCA_MEM_SIZE/4 - BUFFERLISTSIZE)/SCABUFSIZE;
+
+	/* limit number of buffers to maximum amount of descriptors */
+	if (BufferCount > BUFFERLISTSIZE/sizeof(SCADESC))
+		BufferCount = BUFFERLISTSIZE/sizeof(SCADESC);
+
+	/* use enough buffers to transmit one max size frame */
+	info->tx_buf_count = BuffersPerFrame + 1;
+
+	/* never use more than half the available buffers for transmit */
+	if (info->tx_buf_count > (BufferCount/2))
+		info->tx_buf_count = BufferCount/2;
+
+	if (info->tx_buf_count > SCAMAXDESC)
+		info->tx_buf_count = SCAMAXDESC;
+
+	/* use remaining buffers for receive */
+	info->rx_buf_count = BufferCount - info->tx_buf_count;
+
+	if (info->rx_buf_count > SCAMAXDESC)
+		info->rx_buf_count = SCAMAXDESC;
+
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk("%s(%d):%s Allocating %d TX and %d RX DMA buffers.\n",
+			__FILE__,__LINE__, info->device_name,
+			info->tx_buf_count,info->rx_buf_count);
+
+	if ( alloc_buf_list( info ) < 0 ||
+		alloc_frame_bufs(info,
+		  			info->rx_buf_list,
+		  			info->rx_buf_list_ex,
+					info->rx_buf_count) < 0 ||
+		alloc_frame_bufs(info,
+					info->tx_buf_list,
+					info->tx_buf_list_ex,
+					info->tx_buf_count) < 0 ||
+		alloc_tmp_rx_buf(info) < 0 ) {
+		printk("%s(%d):%s Can't allocate DMA buffer memory\n",
+			__FILE__,__LINE__, info->device_name);
+		return -ENOMEM;
+	}
+
+	rx_reset_buffers( info );
+
+	return 0;
+}
+
+/* Allocate DMA buffers for the transmit and receive descriptor lists.
+ */
+int alloc_buf_list(SLMP_INFO *info)
+{
+	unsigned int i;
+
+	/* build list in adapter shared memory */
+	info->buffer_list = info->memory_base + info->port_array[0]->last_mem_alloc;
+	info->buffer_list_phys = info->port_array[0]->last_mem_alloc;
+	info->port_array[0]->last_mem_alloc += BUFFERLISTSIZE;
+
+	memset(info->buffer_list, 0, BUFFERLISTSIZE);
+
+	/* Save virtual address pointers to the receive and */
+	/* transmit buffer lists. (Receive 1st). These pointers will */
+	/* be used by the processor to access the lists. */
+	info->rx_buf_list = (SCADESC *)info->buffer_list;
+
+	info->tx_buf_list = (SCADESC *)info->buffer_list;
+	info->tx_buf_list += info->rx_buf_count;
+
+	/* Build links for circular buffer entry lists (tx and rx)
+	 *
+	 * Note: links are physical addresses read by the SCA device
+	 * to determine the next buffer entry to use.
+	 */
+
+	for ( i = 0; i < info->rx_buf_count; i++ ) {
+		/* calculate and store physical address of this buffer entry */
+		info->rx_buf_list_ex[i].phys_entry =
+			info->buffer_list_phys + (i * sizeof(SCABUFSIZE));
+
+		/* calculate and store physical address of */
+		/* next entry in cirular list of entries */
+		info->rx_buf_list[i].next = info->buffer_list_phys;
+		if ( i < info->rx_buf_count - 1 )
+			info->rx_buf_list[i].next += (i + 1) * sizeof(SCADESC);
+
+		info->rx_buf_list[i].length = SCABUFSIZE;
+	}
+
+	for ( i = 0; i < info->tx_buf_count; i++ ) {
+		/* calculate and store physical address of this buffer entry */
+		info->tx_buf_list_ex[i].phys_entry = info->buffer_list_phys +
+			((info->rx_buf_count + i) * sizeof(SCADESC));
+
+		/* calculate and store physical address of */
+		/* next entry in cirular list of entries */
+
+		info->tx_buf_list[i].next = info->buffer_list_phys +
+			info->rx_buf_count * sizeof(SCADESC);
+
+		if ( i < info->tx_buf_count - 1 )
+			info->tx_buf_list[i].next += (i + 1) * sizeof(SCADESC);
+	}
+
+	return 0;
+}
+
+/* Allocate the frame DMA buffers used by the specified buffer list.
+ */
+int alloc_frame_bufs(SLMP_INFO *info, SCADESC *buf_list,SCADESC_EX *buf_list_ex,int count)
+{
+	int i;
+	unsigned long phys_addr;
+
+	for ( i = 0; i < count; i++ ) {
+		buf_list_ex[i].virt_addr = info->memory_base + info->port_array[0]->last_mem_alloc;
+		phys_addr = info->port_array[0]->last_mem_alloc;
+		info->port_array[0]->last_mem_alloc += SCABUFSIZE;
+
+		buf_list[i].buf_ptr  = (unsigned short)phys_addr;
+		buf_list[i].buf_base = (unsigned char)(phys_addr >> 16);
+	}
+
+	return 0;
+}
+
+void free_dma_bufs(SLMP_INFO *info)
+{
+	info->buffer_list = NULL;
+	info->rx_buf_list = NULL;
+	info->tx_buf_list = NULL;
+}
+
+/* allocate buffer large enough to hold max_frame_size.
+ * This buffer is used to pass an assembled frame to the line discipline.
+ */
+int alloc_tmp_rx_buf(SLMP_INFO *info)
+{
+	info->tmp_rx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
+	if (info->tmp_rx_buf == NULL)
+		return -ENOMEM;
+	return 0;
+}
+
+void free_tmp_rx_buf(SLMP_INFO *info)
+{
+	if (info->tmp_rx_buf)
+		kfree(info->tmp_rx_buf);
+	info->tmp_rx_buf = NULL;
+}
+
+int claim_resources(SLMP_INFO *info)
+{
+	if (request_mem_region(info->phys_memory_base,SCA_MEM_SIZE,"synclinkmp") == NULL) {
+		printk( "%s(%d):%s mem addr conflict, Addr=%08X\n",
+			__FILE__,__LINE__,info->device_name, info->phys_memory_base);
+		info->init_error = DiagStatus_AddressConflict;
+		goto errout;
+	}
+	else
+		info->shared_mem_requested = 1;
+
+	if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclinkmp") == NULL) {
+		printk( "%s(%d):%s lcr mem addr conflict, Addr=%08X\n",
+			__FILE__,__LINE__,info->device_name, info->phys_lcr_base);
+		info->init_error = DiagStatus_AddressConflict;
+		goto errout;
+	}
+	else
+		info->lcr_mem_requested = 1;
+
+	if (request_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE,"synclinkmp") == NULL) {
+		printk( "%s(%d):%s sca mem addr conflict, Addr=%08X\n",
+			__FILE__,__LINE__,info->device_name, info->phys_sca_base);
+		info->init_error = DiagStatus_AddressConflict;
+		goto errout;
+	}
+	else
+		info->sca_base_requested = 1;
+
+	if (request_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE,"synclinkmp") == NULL) {
+		printk( "%s(%d):%s stat/ctrl mem addr conflict, Addr=%08X\n",
+			__FILE__,__LINE__,info->device_name, info->phys_statctrl_base);
+		info->init_error = DiagStatus_AddressConflict;
+		goto errout;
+	}
+	else
+		info->sca_statctrl_requested = 1;
+
+	info->memory_base = ioremap(info->phys_memory_base,SCA_MEM_SIZE);
+	if (!info->memory_base) {
+		printk( "%s(%d):%s Cant map shared memory, MemAddr=%08X\n",
+			__FILE__,__LINE__,info->device_name, info->phys_memory_base );
+		info->init_error = DiagStatus_CantAssignPciResources;
+		goto errout;
+	}
+
+	info->lcr_base = ioremap(info->phys_lcr_base,PAGE_SIZE);
+	if (!info->lcr_base) {
+		printk( "%s(%d):%s Cant map LCR memory, MemAddr=%08X\n",
+			__FILE__,__LINE__,info->device_name, info->phys_lcr_base );
+		info->init_error = DiagStatus_CantAssignPciResources;
+		goto errout;
+	}
+	info->lcr_base += info->lcr_offset;
+
+	info->sca_base = ioremap(info->phys_sca_base,PAGE_SIZE);
+	if (!info->sca_base) {
+		printk( "%s(%d):%s Cant map SCA memory, MemAddr=%08X\n",
+			__FILE__,__LINE__,info->device_name, info->phys_sca_base );
+		info->init_error = DiagStatus_CantAssignPciResources;
+		goto errout;
+	}
+	info->sca_base += info->sca_offset;
+
+	info->statctrl_base = ioremap(info->phys_statctrl_base,PAGE_SIZE);
+	if (!info->statctrl_base) {
+		printk( "%s(%d):%s Cant map SCA Status/Control memory, MemAddr=%08X\n",
+			__FILE__,__LINE__,info->device_name, info->phys_statctrl_base );
+		info->init_error = DiagStatus_CantAssignPciResources;
+		goto errout;
+	}
+	info->statctrl_base += info->statctrl_offset;
+
+	if ( !memory_test(info) ) {
+		printk( "%s(%d):Shared Memory Test failed for device %s MemAddr=%08X\n",
+			__FILE__,__LINE__,info->device_name, info->phys_memory_base );
+		info->init_error = DiagStatus_MemoryError;
+		goto errout;
+	}
+
+	return 0;
+
+errout:
+	release_resources( info );
+	return -ENODEV;
+}
+
+void release_resources(SLMP_INFO *info)
+{
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk( "%s(%d):%s release_resources() entry\n",
+			__FILE__,__LINE__,info->device_name );
+
+	if ( info->irq_requested ) {
+		free_irq(info->irq_level, info);
+		info->irq_requested = 0;
+	}
+
+	if ( info->shared_mem_requested ) {
+		release_mem_region(info->phys_memory_base,SCA_MEM_SIZE);
+		info->shared_mem_requested = 0;
+	}
+	if ( info->lcr_mem_requested ) {
+		release_mem_region(info->phys_lcr_base + info->lcr_offset,128);
+		info->lcr_mem_requested = 0;
+	}
+	if ( info->sca_base_requested ) {
+		release_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE);
+		info->sca_base_requested = 0;
+	}
+	if ( info->sca_statctrl_requested ) {
+		release_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE);
+		info->sca_statctrl_requested = 0;
+	}
+
+	if (info->memory_base){
+		iounmap(info->memory_base);
+		info->memory_base = NULL;
+	}
+
+	if (info->sca_base) {
+		iounmap(info->sca_base - info->sca_offset);
+		info->sca_base=NULL;
+	}
+
+	if (info->statctrl_base) {
+		iounmap(info->statctrl_base - info->statctrl_offset);
+		info->statctrl_base=NULL;
+	}
+
+	if (info->lcr_base){
+		iounmap(info->lcr_base - info->lcr_offset);
+		info->lcr_base = NULL;
+	}
+
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk( "%s(%d):%s release_resources() exit\n",
+			__FILE__,__LINE__,info->device_name );
+}
+
+/* Add the specified device instance data structure to the
+ * global linked list of devices and increment the device count.
+ */
+void add_device(SLMP_INFO *info)
+{
+	info->next_device = NULL;
+	info->line = synclinkmp_device_count;
+	sprintf(info->device_name,"ttySLM%dp%d",info->adapter_num,info->port_num);
+
+	if (info->line < MAX_DEVICES) {
+		if (maxframe[info->line])
+			info->max_frame_size = maxframe[info->line];
+		info->dosyncppp = dosyncppp[info->line];
+	}
+
+	synclinkmp_device_count++;
+
+	if ( !synclinkmp_device_list )
+		synclinkmp_device_list = info;
+	else {
+		SLMP_INFO *current_dev = synclinkmp_device_list;
+		while( current_dev->next_device )
+			current_dev = current_dev->next_device;
+		current_dev->next_device = info;
+	}
+
+	if ( info->max_frame_size < 4096 )
+		info->max_frame_size = 4096;
+	else if ( info->max_frame_size > 65535 )
+		info->max_frame_size = 65535;
+
+	printk( "SyncLink MultiPort %s: "
+		"Mem=(%08x %08X %08x %08X) IRQ=%d MaxFrameSize=%u\n",
+		info->device_name,
+		info->phys_sca_base,
+		info->phys_memory_base,
+		info->phys_statctrl_base,
+		info->phys_lcr_base,
+		info->irq_level,
+		info->max_frame_size );
+
+#ifdef CONFIG_HDLC
+	hdlcdev_init(info);
+#endif
+}
+
+/* Allocate and initialize a device instance structure
+ *
+ * Return Value:	pointer to SLMP_INFO if success, otherwise NULL
+ */
+static SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
+{
+	SLMP_INFO *info;
+
+	info = (SLMP_INFO *)kmalloc(sizeof(SLMP_INFO),
+		 GFP_KERNEL);
+
+	if (!info) {
+		printk("%s(%d) Error can't allocate device instance data for adapter %d, port %d\n",
+			__FILE__,__LINE__, adapter_num, port_num);
+	} else {
+		memset(info, 0, sizeof(SLMP_INFO));
+		info->magic = MGSL_MAGIC;
+		INIT_WORK(&info->task, bh_handler, info);
+		info->max_frame_size = 4096;
+		info->close_delay = 5*HZ/10;
+		info->closing_wait = 30*HZ;
+		init_waitqueue_head(&info->open_wait);
+		init_waitqueue_head(&info->close_wait);
+		init_waitqueue_head(&info->status_event_wait_q);
+		init_waitqueue_head(&info->event_wait_q);
+		spin_lock_init(&info->netlock);
+		memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
+		info->idle_mode = HDLC_TXIDLE_FLAGS;
+		info->adapter_num = adapter_num;
+		info->port_num = port_num;
+
+		/* Copy configuration info to device instance data */
+		info->irq_level = pdev->irq;
+		info->phys_lcr_base = pci_resource_start(pdev,0);
+		info->phys_sca_base = pci_resource_start(pdev,2);
+		info->phys_memory_base = pci_resource_start(pdev,3);
+		info->phys_statctrl_base = pci_resource_start(pdev,4);
+
+		/* Because veremap only works on page boundaries we must map
+		 * a larger area than is actually implemented for the LCR
+		 * memory range. We map a full page starting at the page boundary.
+		 */
+		info->lcr_offset    = info->phys_lcr_base & (PAGE_SIZE-1);
+		info->phys_lcr_base &= ~(PAGE_SIZE-1);
+
+		info->sca_offset    = info->phys_sca_base & (PAGE_SIZE-1);
+		info->phys_sca_base &= ~(PAGE_SIZE-1);
+
+		info->statctrl_offset    = info->phys_statctrl_base & (PAGE_SIZE-1);
+		info->phys_statctrl_base &= ~(PAGE_SIZE-1);
+
+		info->bus_type = MGSL_BUS_TYPE_PCI;
+		info->irq_flags = SA_SHIRQ;
+
+		init_timer(&info->tx_timer);
+		info->tx_timer.data = (unsigned long)info;
+		info->tx_timer.function = tx_timeout;
+
+		init_timer(&info->status_timer);
+		info->status_timer.data = (unsigned long)info;
+		info->status_timer.function = status_timeout;
+
+		/* Store the PCI9050 misc control register value because a flaw
+		 * in the PCI9050 prevents LCR registers from being read if
+		 * BIOS assigns an LCR base address with bit 7 set.
+		 *
+		 * Only the misc control register is accessed for which only
+		 * write access is needed, so set an initial value and change
+		 * bits to the device instance data as we write the value
+		 * to the actual misc control register.
+		 */
+		info->misc_ctrl_value = 0x087e4546;
+
+		/* initial port state is unknown - if startup errors
+		 * occur, init_error will be set to indicate the
+		 * problem. Once the port is fully initialized,
+		 * this value will be set to 0 to indicate the
+		 * port is available.
+		 */
+		info->init_error = -1;
+	}
+
+	return info;
+}
+
+void device_init(int adapter_num, struct pci_dev *pdev)
+{
+	SLMP_INFO *port_array[SCA_MAX_PORTS];
+	int port;
+
+	/* allocate device instances for up to SCA_MAX_PORTS devices */
+	for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
+		port_array[port] = alloc_dev(adapter_num,port,pdev);
+		if( port_array[port] == NULL ) {
+			for ( --port; port >= 0; --port )
+				kfree(port_array[port]);
+			return;
+		}
+	}
+
+	/* give copy of port_array to all ports and add to device list  */
+	for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
+		memcpy(port_array[port]->port_array,port_array,sizeof(port_array));
+		add_device( port_array[port] );
+		spin_lock_init(&port_array[port]->lock);
+	}
+
+	/* Allocate and claim adapter resources */
+	if ( !claim_resources(port_array[0]) ) {
+
+		alloc_dma_bufs(port_array[0]);
+
+		/* copy resource information from first port to others */
+		for ( port = 1; port < SCA_MAX_PORTS; ++port ) {
+			port_array[port]->lock  = port_array[0]->lock;
+			port_array[port]->irq_level     = port_array[0]->irq_level;
+			port_array[port]->memory_base   = port_array[0]->memory_base;
+			port_array[port]->sca_base      = port_array[0]->sca_base;
+			port_array[port]->statctrl_base = port_array[0]->statctrl_base;
+			port_array[port]->lcr_base      = port_array[0]->lcr_base;
+			alloc_dma_bufs(port_array[port]);
+		}
+
+		if ( request_irq(port_array[0]->irq_level,
+					synclinkmp_interrupt,
+					port_array[0]->irq_flags,
+					port_array[0]->device_name,
+					port_array[0]) < 0 ) {
+			printk( "%s(%d):%s Cant request interrupt, IRQ=%d\n",
+				__FILE__,__LINE__,
+				port_array[0]->device_name,
+				port_array[0]->irq_level );
+		}
+		else {
+			port_array[0]->irq_requested = 1;
+			adapter_test(port_array[0]);
+		}
+	}
+}
+
+static struct tty_operations ops = {
+	.open = open,
+	.close = close,
+	.write = write,
+	.put_char = put_char,
+	.flush_chars = flush_chars,
+	.write_room = write_room,
+	.chars_in_buffer = chars_in_buffer,
+	.flush_buffer = flush_buffer,
+	.ioctl = ioctl,
+	.throttle = throttle,
+	.unthrottle = unthrottle,
+	.send_xchar = send_xchar,
+	.break_ctl = set_break,
+	.wait_until_sent = wait_until_sent,
+ 	.read_proc = read_proc,
+	.set_termios = set_termios,
+	.stop = tx_hold,
+	.start = tx_release,
+	.hangup = hangup,
+	.tiocmget = tiocmget,
+	.tiocmset = tiocmset,
+};
+
+static void synclinkmp_cleanup(void)
+{
+	int rc;
+	SLMP_INFO *info;
+	SLMP_INFO *tmp;
+
+	printk("Unloading %s %s\n", driver_name, driver_version);
+
+	if (serial_driver) {
+		if ((rc = tty_unregister_driver(serial_driver)))
+			printk("%s(%d) failed to unregister tty driver err=%d\n",
+			       __FILE__,__LINE__,rc);
+		put_tty_driver(serial_driver);
+	}
+
+	/* reset devices */
+	info = synclinkmp_device_list;
+	while(info) {
+		reset_port(info);
+		info = info->next_device;
+	}
+
+	/* release devices */
+	info = synclinkmp_device_list;
+	while(info) {
+#ifdef CONFIG_HDLC
+		hdlcdev_exit(info);
+#endif
+		free_dma_bufs(info);
+		free_tmp_rx_buf(info);
+		if ( info->port_num == 0 ) {
+			if (info->sca_base)
+				write_reg(info, LPR, 1); /* set low power mode */
+			release_resources(info);
+		}
+		tmp = info;
+		info = info->next_device;
+		kfree(tmp);
+	}
+
+	pci_unregister_driver(&synclinkmp_pci_driver);
+}
+
+/* Driver initialization entry point.
+ */
+
+static int __init synclinkmp_init(void)
+{
+	int rc;
+
+	if (break_on_load) {
+	 	synclinkmp_get_text_ptr();
+  		BREAKPOINT();
+	}
+
+ 	printk("%s %s\n", driver_name, driver_version);
+
+	if ((rc = pci_register_driver(&synclinkmp_pci_driver)) < 0) {
+		printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc);
+		return rc;
+	}
+
+	serial_driver = alloc_tty_driver(128);
+	if (!serial_driver) {
+		rc = -ENOMEM;
+		goto error;
+	}
+
+	/* Initialize the tty_driver structure */
+
+	serial_driver->owner = THIS_MODULE;
+	serial_driver->driver_name = "synclinkmp";
+	serial_driver->name = "ttySLM";
+	serial_driver->major = ttymajor;
+	serial_driver->minor_start = 64;
+	serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
+	serial_driver->subtype = SERIAL_TYPE_NORMAL;
+	serial_driver->init_termios = tty_std_termios;
+	serial_driver->init_termios.c_cflag =
+		B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+	serial_driver->flags = TTY_DRIVER_REAL_RAW;
+	tty_set_operations(serial_driver, &ops);
+	if ((rc = tty_register_driver(serial_driver)) < 0) {
+		printk("%s(%d):Couldn't register serial driver\n",
+			__FILE__,__LINE__);
+		put_tty_driver(serial_driver);
+		serial_driver = NULL;
+		goto error;
+	}
+
+ 	printk("%s %s, tty major#%d\n",
+		driver_name, driver_version,
+		serial_driver->major);
+
+	return 0;
+
+error:
+	synclinkmp_cleanup();
+	return rc;
+}
+
+static void __exit synclinkmp_exit(void)
+{
+	synclinkmp_cleanup();
+}
+
+module_init(synclinkmp_init);
+module_exit(synclinkmp_exit);
+
+/* Set the port for internal loopback mode.
+ * The TxCLK and RxCLK signals are generated from the BRG and
+ * the TxD is looped back to the RxD internally.
+ */
+void enable_loopback(SLMP_INFO *info, int enable)
+{
+	if (enable) {
+		/* MD2 (Mode Register 2)
+		 * 01..00  CNCT<1..0> Channel Connection 11=Local Loopback
+		 */
+		write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) | (BIT1 + BIT0)));
+
+		/* degate external TxC clock source */
+		info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
+		write_control_reg(info);
+
+		/* RXS/TXS (Rx/Tx clock source)
+		 * 07      Reserved, must be 0
+		 * 06..04  Clock Source, 100=BRG
+		 * 03..00  Clock Divisor, 0000=1
+		 */
+		write_reg(info, RXS, 0x40);
+		write_reg(info, TXS, 0x40);
+
+	} else {
+		/* MD2 (Mode Register 2)
+	 	 * 01..00  CNCT<1..0> Channel connection, 0=normal
+		 */
+		write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) & ~(BIT1 + BIT0)));
+
+		/* RXS/TXS (Rx/Tx clock source)
+		 * 07      Reserved, must be 0
+		 * 06..04  Clock Source, 000=RxC/TxC Pin
+		 * 03..00  Clock Divisor, 0000=1
+		 */
+		write_reg(info, RXS, 0x00);
+		write_reg(info, TXS, 0x00);
+	}
+
+	/* set LinkSpeed if available, otherwise default to 2Mbps */
+	if (info->params.clock_speed)
+		set_rate(info, info->params.clock_speed);
+	else
+		set_rate(info, 3686400);
+}
+
+/* Set the baud rate register to the desired speed
+ *
+ *	data_rate	data rate of clock in bits per second
+ *			A data rate of 0 disables the AUX clock.
+ */
+void set_rate( SLMP_INFO *info, u32 data_rate )
+{
+       	u32 TMCValue;
+       	unsigned char BRValue;
+	u32 Divisor=0;
+
+	/* fBRG = fCLK/(TMC * 2^BR)
+	 */
+	if (data_rate != 0) {
+		Divisor = 14745600/data_rate;
+		if (!Divisor)
+			Divisor = 1;
+
+		TMCValue = Divisor;
+
+		BRValue = 0;
+		if (TMCValue != 1 && TMCValue != 2) {
+			/* BRValue of 0 provides 50/50 duty cycle *only* when
+			 * TMCValue is 1 or 2. BRValue of 1 to 9 always provides
+			 * 50/50 duty cycle.
+			 */
+			BRValue = 1;
+			TMCValue >>= 1;
+		}
+
+		/* while TMCValue is too big for TMC register, divide
+		 * by 2 and increment BR exponent.
+		 */
+		for(; TMCValue > 256 && BRValue < 10; BRValue++)
+			TMCValue >>= 1;
+
+		write_reg(info, TXS,
+			(unsigned char)((read_reg(info, TXS) & 0xf0) | BRValue));
+		write_reg(info, RXS,
+			(unsigned char)((read_reg(info, RXS) & 0xf0) | BRValue));
+		write_reg(info, TMC, (unsigned char)TMCValue);
+	}
+	else {
+		write_reg(info, TXS,0);
+		write_reg(info, RXS,0);
+		write_reg(info, TMC, 0);
+	}
+}
+
+/* Disable receiver
+ */
+void rx_stop(SLMP_INFO *info)
+{
+	if (debug_level >= DEBUG_LEVEL_ISR)
+		printk("%s(%d):%s rx_stop()\n",
+			 __FILE__,__LINE__, info->device_name );
+
+	write_reg(info, CMD, RXRESET);
+
+	info->ie0_value &= ~RXRDYE;
+	write_reg(info, IE0, info->ie0_value);	/* disable Rx data interrupts */
+
+	write_reg(info, RXDMA + DSR, 0);	/* disable Rx DMA */
+	write_reg(info, RXDMA + DCMD, SWABORT);	/* reset/init Rx DMA */
+	write_reg(info, RXDMA + DIR, 0);	/* disable Rx DMA interrupts */
+
+	info->rx_enabled = 0;
+	info->rx_overflow = 0;
+}
+
+/* enable the receiver
+ */
+void rx_start(SLMP_INFO *info)
+{
+	int i;
+
+	if (debug_level >= DEBUG_LEVEL_ISR)
+		printk("%s(%d):%s rx_start()\n",
+			 __FILE__,__LINE__, info->device_name );
+
+	write_reg(info, CMD, RXRESET);
+
+	if ( info->params.mode == MGSL_MODE_HDLC ) {
+		/* HDLC, disabe IRQ on rxdata */
+		info->ie0_value &= ~RXRDYE;
+		write_reg(info, IE0, info->ie0_value);
+
+		/* Reset all Rx DMA buffers and program rx dma */
+		write_reg(info, RXDMA + DSR, 0);		/* disable Rx DMA */
+		write_reg(info, RXDMA + DCMD, SWABORT);	/* reset/init Rx DMA */
+
+		for (i = 0; i < info->rx_buf_count; i++) {
+			info->rx_buf_list[i].status = 0xff;
+
+			// throttle to 4 shared memory writes at a time to prevent
+			// hogging local bus (keep latency time for DMA requests low).
+			if (!(i % 4))
+				read_status_reg(info);
+		}
+		info->current_rx_buf = 0;
+
+		/* set current/1st descriptor address */
+		write_reg16(info, RXDMA + CDA,
+			info->rx_buf_list_ex[0].phys_entry);
+
+		/* set new last rx descriptor address */
+		write_reg16(info, RXDMA + EDA,
+			info->rx_buf_list_ex[info->rx_buf_count - 1].phys_entry);
+
+		/* set buffer length (shared by all rx dma data buffers) */
+		write_reg16(info, RXDMA + BFL, SCABUFSIZE);
+
+		write_reg(info, RXDMA + DIR, 0x60);	/* enable Rx DMA interrupts (EOM/BOF) */
+		write_reg(info, RXDMA + DSR, 0xf2);	/* clear Rx DMA IRQs, enable Rx DMA */
+	} else {
+		/* async, enable IRQ on rxdata */
+		info->ie0_value |= RXRDYE;
+		write_reg(info, IE0, info->ie0_value);
+	}
+
+	write_reg(info, CMD, RXENABLE);
+
+	info->rx_overflow = FALSE;
+	info->rx_enabled = 1;
+}
+
+/* Enable the transmitter and send a transmit frame if
+ * one is loaded in the DMA buffers.
+ */
+void tx_start(SLMP_INFO *info)
+{
+	if (debug_level >= DEBUG_LEVEL_ISR)
+		printk("%s(%d):%s tx_start() tx_count=%d\n",
+			 __FILE__,__LINE__, info->device_name,info->tx_count );
+
+	if (!info->tx_enabled ) {
+		write_reg(info, CMD, TXRESET);
+		write_reg(info, CMD, TXENABLE);
+		info->tx_enabled = TRUE;
+	}
+
+	if ( info->tx_count ) {
+
+		/* If auto RTS enabled and RTS is inactive, then assert */
+		/* RTS and set a flag indicating that the driver should */
+		/* negate RTS when the transmission completes. */
+
+		info->drop_rts_on_tx_done = 0;
+
+		if (info->params.mode != MGSL_MODE_ASYNC) {
+
+			if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) {
+				get_signals( info );
+				if ( !(info->serial_signals & SerialSignal_RTS) ) {
+					info->serial_signals |= SerialSignal_RTS;
+					set_signals( info );
+					info->drop_rts_on_tx_done = 1;
+				}
+			}
+
+			write_reg16(info, TRC0,
+				(unsigned short)(((tx_negate_fifo_level-1)<<8) + tx_active_fifo_level));
+
+			write_reg(info, TXDMA + DSR, 0); 		/* disable DMA channel */
+			write_reg(info, TXDMA + DCMD, SWABORT);	/* reset/init DMA channel */
+	
+			/* set TX CDA (current descriptor address) */
+			write_reg16(info, TXDMA + CDA,
+				info->tx_buf_list_ex[0].phys_entry);
+	
+			/* set TX EDA (last descriptor address) */
+			write_reg16(info, TXDMA + EDA,
+				info->tx_buf_list_ex[info->last_tx_buf].phys_entry);
+	
+			/* enable underrun IRQ */
+			info->ie1_value &= ~IDLE;
+			info->ie1_value |= UDRN;
+			write_reg(info, IE1, info->ie1_value);
+			write_reg(info, SR1, (unsigned char)(IDLE + UDRN));
+	
+			write_reg(info, TXDMA + DIR, 0x40);		/* enable Tx DMA interrupts (EOM) */
+			write_reg(info, TXDMA + DSR, 0xf2);		/* clear Tx DMA IRQs, enable Tx DMA */
+	
+			info->tx_timer.expires = jiffies + msecs_to_jiffies(5000);
+			add_timer(&info->tx_timer);
+		}
+		else {
+			tx_load_fifo(info);
+			/* async, enable IRQ on txdata */
+			info->ie0_value |= TXRDYE;
+			write_reg(info, IE0, info->ie0_value);
+		}
+
+		info->tx_active = 1;
+	}
+}
+
+/* stop the transmitter and DMA
+ */
+void tx_stop( SLMP_INFO *info )
+{
+	if (debug_level >= DEBUG_LEVEL_ISR)
+		printk("%s(%d):%s tx_stop()\n",
+			 __FILE__,__LINE__, info->device_name );
+
+	del_timer(&info->tx_timer);
+
+	write_reg(info, TXDMA + DSR, 0);		/* disable DMA channel */
+	write_reg(info, TXDMA + DCMD, SWABORT);	/* reset/init DMA channel */
+
+	write_reg(info, CMD, TXRESET);
+
+	info->ie1_value &= ~(UDRN + IDLE);
+	write_reg(info, IE1, info->ie1_value);	/* disable tx status interrupts */
+	write_reg(info, SR1, (unsigned char)(IDLE + UDRN));	/* clear pending */
+
+	info->ie0_value &= ~TXRDYE;
+	write_reg(info, IE0, info->ie0_value);	/* disable tx data interrupts */
+
+	info->tx_enabled = 0;
+	info->tx_active  = 0;
+}
+
+/* Fill the transmit FIFO until the FIFO is full or
+ * there is no more data to load.
+ */
+void tx_load_fifo(SLMP_INFO *info)
+{
+	u8 TwoBytes[2];
+
+	/* do nothing is now tx data available and no XON/XOFF pending */
+
+	if ( !info->tx_count && !info->x_char )
+		return;
+
+	/* load the Transmit FIFO until FIFOs full or all data sent */
+
+	while( info->tx_count && (read_reg(info,SR0) & BIT1) ) {
+
+		/* there is more space in the transmit FIFO and */
+		/* there is more data in transmit buffer */
+
+		if ( (info->tx_count > 1) && !info->x_char ) {
+ 			/* write 16-bits */
+			TwoBytes[0] = info->tx_buf[info->tx_get++];
+			if (info->tx_get >= info->max_frame_size)
+				info->tx_get -= info->max_frame_size;
+			TwoBytes[1] = info->tx_buf[info->tx_get++];
+			if (info->tx_get >= info->max_frame_size)
+				info->tx_get -= info->max_frame_size;
+
+			write_reg16(info, TRB, *((u16 *)TwoBytes));
+
+			info->tx_count -= 2;
+			info->icount.tx += 2;
+		} else {
+			/* only 1 byte left to transmit or 1 FIFO slot left */
+
+			if (info->x_char) {
+				/* transmit pending high priority char */
+				write_reg(info, TRB, info->x_char);
+				info->x_char = 0;
+			} else {
+				write_reg(info, TRB, info->tx_buf[info->tx_get++]);
+				if (info->tx_get >= info->max_frame_size)
+					info->tx_get -= info->max_frame_size;
+				info->tx_count--;
+			}
+			info->icount.tx++;
+		}
+	}
+}
+
+/* Reset a port to a known state
+ */
+void reset_port(SLMP_INFO *info)
+{
+	if (info->sca_base) {
+
+		tx_stop(info);
+		rx_stop(info);
+
+		info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
+		set_signals(info);
+
+		/* disable all port interrupts */
+		info->ie0_value = 0;
+		info->ie1_value = 0;
+		info->ie2_value = 0;
+		write_reg(info, IE0, info->ie0_value);
+		write_reg(info, IE1, info->ie1_value);
+		write_reg(info, IE2, info->ie2_value);
+
+		write_reg(info, CMD, CHRESET);
+	}
+}
+
+/* Reset all the ports to a known state.
+ */
+void reset_adapter(SLMP_INFO *info)
+{
+	int i;
+
+	for ( i=0; i < SCA_MAX_PORTS; ++i) {
+		if (info->port_array[i])
+			reset_port(info->port_array[i]);
+	}
+}
+
+/* Program port for asynchronous communications.
+ */
+void async_mode(SLMP_INFO *info)
+{
+
+  	unsigned char RegValue;
+
+	tx_stop(info);
+	rx_stop(info);
+
+	/* MD0, Mode Register 0
+	 *
+	 * 07..05  PRCTL<2..0>, Protocol Mode, 000=async
+	 * 04      AUTO, Auto-enable (RTS/CTS/DCD)
+	 * 03      Reserved, must be 0
+	 * 02      CRCCC, CRC Calculation, 0=disabled
+	 * 01..00  STOP<1..0> Stop bits (00=1,10=2)
+	 *
+	 * 0000 0000
+	 */
+	RegValue = 0x00;
+	if (info->params.stop_bits != 1)
+		RegValue |= BIT1;
+	write_reg(info, MD0, RegValue);
+
+	/* MD1, Mode Register 1
+	 *
+	 * 07..06  BRATE<1..0>, bit rate, 00=1/1 01=1/16 10=1/32 11=1/64
+	 * 05..04  TXCHR<1..0>, tx char size, 00=8 bits,01=7,10=6,11=5
+	 * 03..02  RXCHR<1..0>, rx char size
+	 * 01..00  PMPM<1..0>, Parity mode, 00=none 10=even 11=odd
+	 *
+	 * 0100 0000
+	 */
+	RegValue = 0x40;
+	switch (info->params.data_bits) {
+	case 7: RegValue |= BIT4 + BIT2; break;
+	case 6: RegValue |= BIT5 + BIT3; break;
+	case 5: RegValue |= BIT5 + BIT4 + BIT3 + BIT2; break;
+	}
+	if (info->params.parity != ASYNC_PARITY_NONE) {
+		RegValue |= BIT1;
+		if (info->params.parity == ASYNC_PARITY_ODD)
+			RegValue |= BIT0;
+	}
+	write_reg(info, MD1, RegValue);
+
+	/* MD2, Mode Register 2
+	 *
+	 * 07..02  Reserved, must be 0
+	 * 01..00  CNCT<1..0> Channel connection, 0=normal
+	 *
+	 * 0000 0000
+	 */
+	RegValue = 0x00;
+	write_reg(info, MD2, RegValue);
+
+	/* RXS, Receive clock source
+	 *
+	 * 07      Reserved, must be 0
+	 * 06..04  RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL
+	 * 03..00  RXBR<3..0>, rate divisor, 0000=1
+	 */
+	RegValue=BIT6;
+	write_reg(info, RXS, RegValue);
+
+	/* TXS, Transmit clock source
+	 *
+	 * 07      Reserved, must be 0
+	 * 06..04  RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock
+	 * 03..00  RXBR<3..0>, rate divisor, 0000=1
+	 */
+	RegValue=BIT6;
+	write_reg(info, TXS, RegValue);
+
+	/* Control Register
+	 *
+	 * 6,4,2,0  CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out
+	 */
+	info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
+	write_control_reg(info);
+
+	tx_set_idle(info);
+
+	/* RRC Receive Ready Control 0
+	 *
+	 * 07..05  Reserved, must be 0
+	 * 04..00  RRC<4..0> Rx FIFO trigger active 0x00 = 1 byte
+	 */
+	write_reg(info, RRC, 0x00);
+
+	/* TRC0 Transmit Ready Control 0
+	 *
+	 * 07..05  Reserved, must be 0
+	 * 04..00  TRC<4..0> Tx FIFO trigger active 0x10 = 16 bytes
+	 */
+	write_reg(info, TRC0, 0x10);
+
+	/* TRC1 Transmit Ready Control 1
+	 *
+	 * 07..05  Reserved, must be 0
+	 * 04..00  TRC<4..0> Tx FIFO trigger inactive 0x1e = 31 bytes (full-1)
+	 */
+	write_reg(info, TRC1, 0x1e);
+
+	/* CTL, MSCI control register
+	 *
+	 * 07..06  Reserved, set to 0
+	 * 05      UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC)
+	 * 04      IDLC, idle control, 0=mark 1=idle register
+	 * 03      BRK, break, 0=off 1 =on (async)
+	 * 02      SYNCLD, sync char load enable (BSC) 1=enabled
+	 * 01      GOP, go active on poll (LOOP mode) 1=enabled
+	 * 00      RTS, RTS output control, 0=active 1=inactive
+	 *
+	 * 0001 0001
+	 */
+	RegValue = 0x10;
+	if (!(info->serial_signals & SerialSignal_RTS))
+		RegValue |= 0x01;
+	write_reg(info, CTL, RegValue);
+
+	/* enable status interrupts */
+	info->ie0_value |= TXINTE + RXINTE;
+	write_reg(info, IE0, info->ie0_value);
+
+	/* enable break detect interrupt */
+	info->ie1_value = BRKD;
+	write_reg(info, IE1, info->ie1_value);
+
+	/* enable rx overrun interrupt */
+	info->ie2_value = OVRN;
+	write_reg(info, IE2, info->ie2_value);
+
+	set_rate( info, info->params.data_rate * 16 );
+
+	if (info->params.loopback)
+		enable_loopback(info,1);
+}
+
+/* Program the SCA for HDLC communications.
+ */
+void hdlc_mode(SLMP_INFO *info)
+{
+	unsigned char RegValue;
+	u32 DpllDivisor;
+
+	// Can't use DPLL because SCA outputs recovered clock on RxC when
+	// DPLL mode selected. This causes output contention with RxC receiver.
+	// Use of DPLL would require external hardware to disable RxC receiver
+	// when DPLL mode selected.
+	info->params.flags &= ~(HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL);
+
+	/* disable DMA interrupts */
+	write_reg(info, TXDMA + DIR, 0);
+	write_reg(info, RXDMA + DIR, 0);
+
+	/* MD0, Mode Register 0
+	 *
+	 * 07..05  PRCTL<2..0>, Protocol Mode, 100=HDLC
+	 * 04      AUTO, Auto-enable (RTS/CTS/DCD)
+	 * 03      Reserved, must be 0
+	 * 02      CRCCC, CRC Calculation, 1=enabled
+	 * 01      CRC1, CRC selection, 0=CRC-16,1=CRC-CCITT-16
+	 * 00      CRC0, CRC initial value, 1 = all 1s
+	 *
+	 * 1000 0001
+	 */
+	RegValue = 0x81;
+	if (info->params.flags & HDLC_FLAG_AUTO_CTS)
+		RegValue |= BIT4;
+	if (info->params.flags & HDLC_FLAG_AUTO_DCD)
+		RegValue |= BIT4;
+	if (info->params.crc_type == HDLC_CRC_16_CCITT)
+		RegValue |= BIT2 + BIT1;
+	write_reg(info, MD0, RegValue);
+
+	/* MD1, Mode Register 1
+	 *
+	 * 07..06  ADDRS<1..0>, Address detect, 00=no addr check
+	 * 05..04  TXCHR<1..0>, tx char size, 00=8 bits
+	 * 03..02  RXCHR<1..0>, rx char size, 00=8 bits
+	 * 01..00  PMPM<1..0>, Parity mode, 00=no parity
+	 *
+	 * 0000 0000
+	 */
+	RegValue = 0x00;
+	write_reg(info, MD1, RegValue);
+
+	/* MD2, Mode Register 2
+	 *
+	 * 07      NRZFM, 0=NRZ, 1=FM
+	 * 06..05  CODE<1..0> Encoding, 00=NRZ
+	 * 04..03  DRATE<1..0> DPLL Divisor, 00=8
+	 * 02      Reserved, must be 0
+	 * 01..00  CNCT<1..0> Channel connection, 0=normal
+	 *
+	 * 0000 0000
+	 */
+	RegValue = 0x00;
+	switch(info->params.encoding) {
+	case HDLC_ENCODING_NRZI:	  RegValue |= BIT5; break;
+	case HDLC_ENCODING_BIPHASE_MARK:  RegValue |= BIT7 + BIT5; break; /* aka FM1 */
+	case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT7 + BIT6; break; /* aka FM0 */
+	case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT7; break; 	/* aka Manchester */
+#if 0
+	case HDLC_ENCODING_NRZB:	       				/* not supported */
+	case HDLC_ENCODING_NRZI_MARK:          				/* not supported */
+	case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: 				/* not supported */
+#endif
+	}
+	if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) {
+		DpllDivisor = 16;
+		RegValue |= BIT3;
+	} else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) {
+		DpllDivisor = 8;
+	} else {
+		DpllDivisor = 32;
+		RegValue |= BIT4;
+	}
+	write_reg(info, MD2, RegValue);
+
+
+	/* RXS, Receive clock source
+	 *
+	 * 07      Reserved, must be 0
+	 * 06..04  RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL
+	 * 03..00  RXBR<3..0>, rate divisor, 0000=1
+	 */
+	RegValue=0;
+	if (info->params.flags & HDLC_FLAG_RXC_BRG)
+		RegValue |= BIT6;
+	if (info->params.flags & HDLC_FLAG_RXC_DPLL)
+		RegValue |= BIT6 + BIT5;
+	write_reg(info, RXS, RegValue);
+
+	/* TXS, Transmit clock source
+	 *
+	 * 07      Reserved, must be 0
+	 * 06..04  RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock
+	 * 03..00  RXBR<3..0>, rate divisor, 0000=1
+	 */
+	RegValue=0;
+	if (info->params.flags & HDLC_FLAG_TXC_BRG)
+		RegValue |= BIT6;
+	if (info->params.flags & HDLC_FLAG_TXC_DPLL)
+		RegValue |= BIT6 + BIT5;
+	write_reg(info, TXS, RegValue);
+
+	if (info->params.flags & HDLC_FLAG_RXC_DPLL)
+		set_rate(info, info->params.clock_speed * DpllDivisor);
+	else
+		set_rate(info, info->params.clock_speed);
+
+	/* GPDATA (General Purpose I/O Data Register)
+	 *
+	 * 6,4,2,0  CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out
+	 */
+	if (info->params.flags & HDLC_FLAG_TXC_BRG)
+		info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
+	else
+		info->port_array[0]->ctrlreg_value &= ~(BIT0 << (info->port_num * 2));
+	write_control_reg(info);
+
+	/* RRC Receive Ready Control 0
+	 *
+	 * 07..05  Reserved, must be 0
+	 * 04..00  RRC<4..0> Rx FIFO trigger active
+	 */
+	write_reg(info, RRC, rx_active_fifo_level);
+
+	/* TRC0 Transmit Ready Control 0
+	 *
+	 * 07..05  Reserved, must be 0
+	 * 04..00  TRC<4..0> Tx FIFO trigger active
+	 */
+	write_reg(info, TRC0, tx_active_fifo_level);
+
+	/* TRC1 Transmit Ready Control 1
+	 *
+	 * 07..05  Reserved, must be 0
+	 * 04..00  TRC<4..0> Tx FIFO trigger inactive 0x1f = 32 bytes (full)
+	 */
+	write_reg(info, TRC1, (unsigned char)(tx_negate_fifo_level - 1));
+
+	/* DMR, DMA Mode Register
+	 *
+	 * 07..05  Reserved, must be 0
+	 * 04      TMOD, Transfer Mode: 1=chained-block
+	 * 03      Reserved, must be 0
+	 * 02      NF, Number of Frames: 1=multi-frame
+	 * 01      CNTE, Frame End IRQ Counter enable: 0=disabled
+	 * 00      Reserved, must be 0
+	 *
+	 * 0001 0100
+	 */
+	write_reg(info, TXDMA + DMR, 0x14);
+	write_reg(info, RXDMA + DMR, 0x14);
+
+	/* Set chain pointer base (upper 8 bits of 24 bit addr) */
+	write_reg(info, RXDMA + CPB,
+		(unsigned char)(info->buffer_list_phys >> 16));
+
+	/* Set chain pointer base (upper 8 bits of 24 bit addr) */
+	write_reg(info, TXDMA + CPB,
+		(unsigned char)(info->buffer_list_phys >> 16));
+
+	/* enable status interrupts. other code enables/disables
+	 * the individual sources for these two interrupt classes.
+	 */
+	info->ie0_value |= TXINTE + RXINTE;
+	write_reg(info, IE0, info->ie0_value);
+
+	/* CTL, MSCI control register
+	 *
+	 * 07..06  Reserved, set to 0
+	 * 05      UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC)
+	 * 04      IDLC, idle control, 0=mark 1=idle register
+	 * 03      BRK, break, 0=off 1 =on (async)
+	 * 02      SYNCLD, sync char load enable (BSC) 1=enabled
+	 * 01      GOP, go active on poll (LOOP mode) 1=enabled
+	 * 00      RTS, RTS output control, 0=active 1=inactive
+	 *
+	 * 0001 0001
+	 */
+	RegValue = 0x10;
+	if (!(info->serial_signals & SerialSignal_RTS))
+		RegValue |= 0x01;
+	write_reg(info, CTL, RegValue);
+
+	/* preamble not supported ! */
+
+	tx_set_idle(info);
+	tx_stop(info);
+	rx_stop(info);
+
+	set_rate(info, info->params.clock_speed);
+
+	if (info->params.loopback)
+		enable_loopback(info,1);
+}
+
+/* Set the transmit HDLC idle mode
+ */
+void tx_set_idle(SLMP_INFO *info)
+{
+	unsigned char RegValue = 0xff;
+
+	/* Map API idle mode to SCA register bits */
+	switch(info->idle_mode) {
+	case HDLC_TXIDLE_FLAGS:			RegValue = 0x7e; break;
+	case HDLC_TXIDLE_ALT_ZEROS_ONES:	RegValue = 0xaa; break;
+	case HDLC_TXIDLE_ZEROS:			RegValue = 0x00; break;
+	case HDLC_TXIDLE_ONES:			RegValue = 0xff; break;
+	case HDLC_TXIDLE_ALT_MARK_SPACE:	RegValue = 0xaa; break;
+	case HDLC_TXIDLE_SPACE:			RegValue = 0x00; break;
+	case HDLC_TXIDLE_MARK:			RegValue = 0xff; break;
+	}
+
+	write_reg(info, IDL, RegValue);
+}
+
+/* Query the adapter for the state of the V24 status (input) signals.
+ */
+void get_signals(SLMP_INFO *info)
+{
+	u16 status = read_reg(info, SR3);
+	u16 gpstatus = read_status_reg(info);
+	u16 testbit;
+
+	/* clear all serial signals except DTR and RTS */
+	info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS;
+
+	/* set serial signal bits to reflect MISR */
+
+	if (!(status & BIT3))
+		info->serial_signals |= SerialSignal_CTS;
+
+	if ( !(status & BIT2))
+		info->serial_signals |= SerialSignal_DCD;
+
+	testbit = BIT1 << (info->port_num * 2); // Port 0..3 RI is GPDATA<1,3,5,7>
+	if (!(gpstatus & testbit))
+		info->serial_signals |= SerialSignal_RI;
+
+	testbit = BIT0 << (info->port_num * 2); // Port 0..3 DSR is GPDATA<0,2,4,6>
+	if (!(gpstatus & testbit))
+		info->serial_signals |= SerialSignal_DSR;
+}
+
+/* Set the state of DTR and RTS based on contents of
+ * serial_signals member of device context.
+ */
+void set_signals(SLMP_INFO *info)
+{
+	unsigned char RegValue;
+	u16 EnableBit;
+
+	RegValue = read_reg(info, CTL);
+	if (info->serial_signals & SerialSignal_RTS)
+		RegValue &= ~BIT0;
+	else
+		RegValue |= BIT0;
+	write_reg(info, CTL, RegValue);
+
+	// Port 0..3 DTR is ctrl reg <1,3,5,7>
+	EnableBit = BIT1 << (info->port_num*2);
+	if (info->serial_signals & SerialSignal_DTR)
+		info->port_array[0]->ctrlreg_value &= ~EnableBit;
+	else
+		info->port_array[0]->ctrlreg_value |= EnableBit;
+	write_control_reg(info);
+}
+
+/*******************/
+/* DMA Buffer Code */
+/*******************/
+
+/* Set the count for all receive buffers to SCABUFSIZE
+ * and set the current buffer to the first buffer. This effectively
+ * makes all buffers free and discards any data in buffers.
+ */
+void rx_reset_buffers(SLMP_INFO *info)
+{
+	rx_free_frame_buffers(info, 0, info->rx_buf_count - 1);
+}
+
+/* Free the buffers used by a received frame
+ *
+ * info   pointer to device instance data
+ * first  index of 1st receive buffer of frame
+ * last   index of last receive buffer of frame
+ */
+void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last)
+{
+	int done = 0;
+
+	while(!done) {
+	        /* reset current buffer for reuse */
+		info->rx_buf_list[first].status = 0xff;
+
+	        if (first == last) {
+	                done = 1;
+	                /* set new last rx descriptor address */
+			write_reg16(info, RXDMA + EDA, info->rx_buf_list_ex[first].phys_entry);
+	        }
+
+	        first++;
+		if (first == info->rx_buf_count)
+			first = 0;
+	}
+
+	/* set current buffer to next buffer after last buffer of frame */
+	info->current_rx_buf = first;
+}
+
+/* Return a received frame from the receive DMA buffers.
+ * Only frames received without errors are returned.
+ *
+ * Return Value:	1 if frame returned, otherwise 0
+ */
+int rx_get_frame(SLMP_INFO *info)
+{
+	unsigned int StartIndex, EndIndex;	/* index of 1st and last buffers of Rx frame */
+	unsigned short status;
+	unsigned int framesize = 0;
+	int ReturnCode = 0;
+	unsigned long flags;
+	struct tty_struct *tty = info->tty;
+	unsigned char addr_field = 0xff;
+   	SCADESC *desc;
+	SCADESC_EX *desc_ex;
+
+CheckAgain:
+	/* assume no frame returned, set zero length */
+	framesize = 0;
+	addr_field = 0xff;
+
+	/*
+	 * current_rx_buf points to the 1st buffer of the next available
+	 * receive frame. To find the last buffer of the frame look for
+	 * a non-zero status field in the buffer entries. (The status
+	 * field is set by the 16C32 after completing a receive frame.
+	 */
+	StartIndex = EndIndex = info->current_rx_buf;
+
+	for ( ;; ) {
+		desc = &info->rx_buf_list[EndIndex];
+		desc_ex = &info->rx_buf_list_ex[EndIndex];
+
+		if (desc->status == 0xff)
+			goto Cleanup;	/* current desc still in use, no frames available */
+
+		if (framesize == 0 && info->params.addr_filter != 0xff)
+			addr_field = desc_ex->virt_addr[0];
+
+		framesize += desc->length;
+
+		/* Status != 0 means last buffer of frame */
+		if (desc->status)
+			break;
+
+		EndIndex++;
+		if (EndIndex == info->rx_buf_count)
+			EndIndex = 0;
+
+		if (EndIndex == info->current_rx_buf) {
+			/* all buffers have been 'used' but none mark	   */
+			/* the end of a frame. Reset buffers and receiver. */
+			if ( info->rx_enabled ){
+				spin_lock_irqsave(&info->lock,flags);
+				rx_start(info);
+				spin_unlock_irqrestore(&info->lock,flags);
+			}
+			goto Cleanup;
+		}
+
+	}
+
+	/* check status of receive frame */
+
+	/* frame status is byte stored after frame data
+	 *
+	 * 7 EOM (end of msg), 1 = last buffer of frame
+	 * 6 Short Frame, 1 = short frame
+	 * 5 Abort, 1 = frame aborted
+	 * 4 Residue, 1 = last byte is partial
+	 * 3 Overrun, 1 = overrun occurred during frame reception
+	 * 2 CRC,     1 = CRC error detected
+	 *
+	 */
+	status = desc->status;
+
+	/* ignore CRC bit if not using CRC (bit is undefined) */
+	/* Note:CRC is not save to data buffer */
+	if (info->params.crc_type == HDLC_CRC_NONE)
+		status &= ~BIT2;
+
+	if (framesize == 0 ||
+		 (addr_field != 0xff && addr_field != info->params.addr_filter)) {
+		/* discard 0 byte frames, this seems to occur sometime
+		 * when remote is idling flags.
+		 */
+		rx_free_frame_buffers(info, StartIndex, EndIndex);
+		goto CheckAgain;
+	}
+
+	if (framesize < 2)
+		status |= BIT6;
+
+	if (status & (BIT6+BIT5+BIT3+BIT2)) {
+		/* received frame has errors,
+		 * update counts and mark frame size as 0
+		 */
+		if (status & BIT6)
+			info->icount.rxshort++;
+		else if (status & BIT5)
+			info->icount.rxabort++;
+		else if (status & BIT3)
+			info->icount.rxover++;
+		else
+			info->icount.rxcrc++;
+
+		framesize = 0;
+#ifdef CONFIG_HDLC
+		{
+			struct net_device_stats *stats = hdlc_stats(info->netdev);
+			stats->rx_errors++;
+			stats->rx_frame_errors++;
+		}
+#endif
+	}
+
+	if ( debug_level >= DEBUG_LEVEL_BH )
+		printk("%s(%d):%s rx_get_frame() status=%04X size=%d\n",
+			__FILE__,__LINE__,info->device_name,status,framesize);
+
+	if ( debug_level >= DEBUG_LEVEL_DATA )
+		trace_block(info,info->rx_buf_list_ex[StartIndex].virt_addr,
+			min_t(int, framesize,SCABUFSIZE),0);
+
+	if (framesize) {
+		if (framesize > info->max_frame_size)
+			info->icount.rxlong++;
+		else {
+			/* copy dma buffer(s) to contiguous intermediate buffer */
+			int copy_count = framesize;
+			int index = StartIndex;
+			unsigned char *ptmp = info->tmp_rx_buf;
+			info->tmp_rx_buf_count = framesize;
+
+			info->icount.rxok++;
+
+			while(copy_count) {
+				int partial_count = min(copy_count,SCABUFSIZE);
+				memcpy( ptmp,
+					info->rx_buf_list_ex[index].virt_addr,
+					partial_count );
+				ptmp += partial_count;
+				copy_count -= partial_count;
+
+				if ( ++index == info->rx_buf_count )
+					index = 0;
+			}
+
+#ifdef CONFIG_HDLC
+			if (info->netcount)
+				hdlcdev_rx(info,info->tmp_rx_buf,framesize);
+			else
+#endif
+				ldisc_receive_buf(tty,info->tmp_rx_buf,
+						  info->flag_buf, framesize);
+		}
+	}
+	/* Free the buffers used by this frame. */
+	rx_free_frame_buffers( info, StartIndex, EndIndex );
+
+	ReturnCode = 1;
+
+Cleanup:
+	if ( info->rx_enabled && info->rx_overflow ) {
+		/* Receiver is enabled, but needs to restarted due to
+		 * rx buffer overflow. If buffers are empty, restart receiver.
+		 */
+		if (info->rx_buf_list[EndIndex].status == 0xff) {
+			spin_lock_irqsave(&info->lock,flags);
+			rx_start(info);
+			spin_unlock_irqrestore(&info->lock,flags);
+		}
+	}
+
+	return ReturnCode;
+}
+
+/* load the transmit DMA buffer with data
+ */
+void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count)
+{
+	unsigned short copy_count;
+	unsigned int i = 0;
+	SCADESC *desc;
+	SCADESC_EX *desc_ex;
+
+	if ( debug_level >= DEBUG_LEVEL_DATA )
+		trace_block(info,buf, min_t(int, count,SCABUFSIZE), 1);
+
+	/* Copy source buffer to one or more DMA buffers, starting with
+	 * the first transmit dma buffer.
+	 */
+	for(i=0;;)
+	{
+		copy_count = min_t(unsigned short,count,SCABUFSIZE);
+
+		desc = &info->tx_buf_list[i];
+		desc_ex = &info->tx_buf_list_ex[i];
+
+		load_pci_memory(info, desc_ex->virt_addr,buf,copy_count);
+
+		desc->length = copy_count;
+		desc->status = 0;
+
+		buf += copy_count;
+		count -= copy_count;
+
+		if (!count)
+			break;
+
+		i++;
+		if (i >= info->tx_buf_count)
+			i = 0;
+	}
+
+	info->tx_buf_list[i].status = 0x81;	/* set EOM and EOT status */
+	info->last_tx_buf = ++i;
+}
+
+int register_test(SLMP_INFO *info)
+{
+	static unsigned char testval[] = {0x00, 0xff, 0xaa, 0x55, 0x69, 0x96};
+	static unsigned int count = sizeof(testval)/sizeof(unsigned char);
+	unsigned int i;
+	int rc = TRUE;
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->lock,flags);
+	reset_port(info);
+
+	/* assume failure */
+	info->init_error = DiagStatus_AddressFailure;
+
+	/* Write bit patterns to various registers but do it out of */
+	/* sync, then read back and verify values. */
+
+	for (i = 0 ; i < count ; i++) {
+		write_reg(info, TMC, testval[i]);
+		write_reg(info, IDL, testval[(i+1)%count]);
+		write_reg(info, SA0, testval[(i+2)%count]);
+		write_reg(info, SA1, testval[(i+3)%count]);
+
+		if ( (read_reg(info, TMC) != testval[i]) ||
+			  (read_reg(info, IDL) != testval[(i+1)%count]) ||
+			  (read_reg(info, SA0) != testval[(i+2)%count]) ||
+			  (read_reg(info, SA1) != testval[(i+3)%count]) )
+		{
+			rc = FALSE;
+			break;
+		}
+	}
+
+	reset_port(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	return rc;
+}
+
+int irq_test(SLMP_INFO *info)
+{
+	unsigned long timeout;
+	unsigned long flags;
+
+	unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
+
+	spin_lock_irqsave(&info->lock,flags);
+	reset_port(info);
+
+	/* assume failure */
+	info->init_error = DiagStatus_IrqFailure;
+	info->irq_occurred = FALSE;
+
+	/* setup timer0 on SCA0 to interrupt */
+
+	/* IER2<7..4> = timer<3..0> interrupt enables (1=enabled) */
+	write_reg(info, IER2, (unsigned char)((info->port_num & 1) ? BIT6 : BIT4));
+
+	write_reg(info, (unsigned char)(timer + TEPR), 0);	/* timer expand prescale */
+	write_reg16(info, (unsigned char)(timer + TCONR), 1);	/* timer constant */
+
+
+	/* TMCS, Timer Control/Status Register
+	 *
+	 * 07      CMF, Compare match flag (read only) 1=match
+	 * 06      ECMI, CMF Interrupt Enable: 1=enabled
+	 * 05      Reserved, must be 0
+	 * 04      TME, Timer Enable
+	 * 03..00  Reserved, must be 0
+	 *
+	 * 0101 0000
+	 */
+	write_reg(info, (unsigned char)(timer + TMCS), 0x50);
+
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	timeout=100;
+	while( timeout-- && !info->irq_occurred ) {
+		msleep_interruptible(10);
+	}
+
+	spin_lock_irqsave(&info->lock,flags);
+	reset_port(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	return info->irq_occurred;
+}
+
+/* initialize individual SCA device (2 ports)
+ */
+static int sca_init(SLMP_INFO *info)
+{
+	/* set wait controller to single mem partition (low), no wait states */
+	write_reg(info, PABR0, 0);	/* wait controller addr boundary 0 */
+	write_reg(info, PABR1, 0);	/* wait controller addr boundary 1 */
+	write_reg(info, WCRL, 0);	/* wait controller low range */
+	write_reg(info, WCRM, 0);	/* wait controller mid range */
+	write_reg(info, WCRH, 0);	/* wait controller high range */
+
+	/* DPCR, DMA Priority Control
+	 *
+	 * 07..05  Not used, must be 0
+	 * 04      BRC, bus release condition: 0=all transfers complete
+	 * 03      CCC, channel change condition: 0=every cycle
+	 * 02..00  PR<2..0>, priority 100=round robin
+	 *
+	 * 00000100 = 0x04
+	 */
+	write_reg(info, DPCR, dma_priority);
+
+	/* DMA Master Enable, BIT7: 1=enable all channels */
+	write_reg(info, DMER, 0x80);
+
+	/* enable all interrupt classes */
+	write_reg(info, IER0, 0xff);	/* TxRDY,RxRDY,TxINT,RxINT (ports 0-1) */
+	write_reg(info, IER1, 0xff);	/* DMIB,DMIA (channels 0-3) */
+	write_reg(info, IER2, 0xf0);	/* TIRQ (timers 0-3) */
+
+	/* ITCR, interrupt control register
+	 * 07      IPC, interrupt priority, 0=MSCI->DMA
+	 * 06..05  IAK<1..0>, Acknowledge cycle, 00=non-ack cycle
+	 * 04      VOS, Vector Output, 0=unmodified vector
+	 * 03..00  Reserved, must be 0
+	 */
+	write_reg(info, ITCR, 0);
+
+	return TRUE;
+}
+
+/* initialize adapter hardware
+ */
+int init_adapter(SLMP_INFO *info)
+{
+	int i;
+
+	/* Set BIT30 of Local Control Reg 0x50 to reset SCA */
+	volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50);
+	u32 readval;
+
+	info->misc_ctrl_value |= BIT30;
+	*MiscCtrl = info->misc_ctrl_value;
+
+	/*
+	 * Force at least 170ns delay before clearing
+	 * reset bit. Each read from LCR takes at least
+	 * 30ns so 10 times for 300ns to be safe.
+	 */
+	for(i=0;i<10;i++)
+		readval = *MiscCtrl;
+
+	info->misc_ctrl_value &= ~BIT30;
+	*MiscCtrl = info->misc_ctrl_value;
+
+	/* init control reg (all DTRs off, all clksel=input) */
+	info->ctrlreg_value = 0xaa;
+	write_control_reg(info);
+
+	{
+		volatile u32 *LCR1BRDR = (u32 *)(info->lcr_base + 0x2c);
+		lcr1_brdr_value &= ~(BIT5 + BIT4 + BIT3);
+
+		switch(read_ahead_count)
+		{
+		case 16:
+			lcr1_brdr_value |= BIT5 + BIT4 + BIT3;
+			break;
+		case 8:
+			lcr1_brdr_value |= BIT5 + BIT4;
+			break;
+		case 4:
+			lcr1_brdr_value |= BIT5 + BIT3;
+			break;
+		case 0:
+			lcr1_brdr_value |= BIT5;
+			break;
+		}
+
+		*LCR1BRDR = lcr1_brdr_value;
+		*MiscCtrl = misc_ctrl_value;
+	}
+
+	sca_init(info->port_array[0]);
+	sca_init(info->port_array[2]);
+
+	return TRUE;
+}
+
+/* Loopback an HDLC frame to test the hardware
+ * interrupt and DMA functions.
+ */
+int loopback_test(SLMP_INFO *info)
+{
+#define TESTFRAMESIZE 20
+
+	unsigned long timeout;
+	u16 count = TESTFRAMESIZE;
+	unsigned char buf[TESTFRAMESIZE];
+	int rc = FALSE;
+	unsigned long flags;
+
+	struct tty_struct *oldtty = info->tty;
+	u32 speed = info->params.clock_speed;
+
+	info->params.clock_speed = 3686400;
+	info->tty = NULL;
+
+	/* assume failure */
+	info->init_error = DiagStatus_DmaFailure;
+
+	/* build and send transmit frame */
+	for (count = 0; count < TESTFRAMESIZE;++count)
+		buf[count] = (unsigned char)count;
+
+	memset(info->tmp_rx_buf,0,TESTFRAMESIZE);
+
+	/* program hardware for HDLC and enabled receiver */
+	spin_lock_irqsave(&info->lock,flags);
+	hdlc_mode(info);
+	enable_loopback(info,1);
+       	rx_start(info);
+	info->tx_count = count;
+	tx_load_dma_buffer(info,buf,count);
+	tx_start(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	/* wait for receive complete */
+	/* Set a timeout for waiting for interrupt. */
+	for ( timeout = 100; timeout; --timeout ) {
+		msleep_interruptible(10);
+
+		if (rx_get_frame(info)) {
+			rc = TRUE;
+			break;
+		}
+	}
+
+	/* verify received frame length and contents */
+	if (rc == TRUE &&
+		( info->tmp_rx_buf_count != count ||
+		  memcmp(buf, info->tmp_rx_buf,count))) {
+		rc = FALSE;
+	}
+
+	spin_lock_irqsave(&info->lock,flags);
+	reset_adapter(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	info->params.clock_speed = speed;
+	info->tty = oldtty;
+
+	return rc;
+}
+
+/* Perform diagnostics on hardware
+ */
+int adapter_test( SLMP_INFO *info )
+{
+	unsigned long flags;
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk( "%s(%d):Testing device %s\n",
+			__FILE__,__LINE__,info->device_name );
+
+	spin_lock_irqsave(&info->lock,flags);
+	init_adapter(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	info->port_array[0]->port_count = 0;
+
+	if ( register_test(info->port_array[0]) &&
+		register_test(info->port_array[1])) {
+
+		info->port_array[0]->port_count = 2;
+
+		if ( register_test(info->port_array[2]) &&
+			register_test(info->port_array[3]) )
+			info->port_array[0]->port_count += 2;
+	}
+	else {
+		printk( "%s(%d):Register test failure for device %s Addr=%08lX\n",
+			__FILE__,__LINE__,info->device_name, (unsigned long)(info->phys_sca_base));
+		return -ENODEV;
+	}
+
+	if ( !irq_test(info->port_array[0]) ||
+		!irq_test(info->port_array[1]) ||
+		 (info->port_count == 4 && !irq_test(info->port_array[2])) ||
+		 (info->port_count == 4 && !irq_test(info->port_array[3]))) {
+		printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n",
+			__FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) );
+		return -ENODEV;
+	}
+
+	if (!loopback_test(info->port_array[0]) ||
+		!loopback_test(info->port_array[1]) ||
+		 (info->port_count == 4 && !loopback_test(info->port_array[2])) ||
+		 (info->port_count == 4 && !loopback_test(info->port_array[3]))) {
+		printk( "%s(%d):DMA test failure for device %s\n",
+			__FILE__,__LINE__,info->device_name);
+		return -ENODEV;
+	}
+
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk( "%s(%d):device %s passed diagnostics\n",
+			__FILE__,__LINE__,info->device_name );
+
+	info->port_array[0]->init_error = 0;
+	info->port_array[1]->init_error = 0;
+	if ( info->port_count > 2 ) {
+		info->port_array[2]->init_error = 0;
+		info->port_array[3]->init_error = 0;
+	}
+
+	return 0;
+}
+
+/* Test the shared memory on a PCI adapter.
+ */
+int memory_test(SLMP_INFO *info)
+{
+	static unsigned long testval[] = { 0x0, 0x55555555, 0xaaaaaaaa,
+		0x66666666, 0x99999999, 0xffffffff, 0x12345678 };
+	unsigned long count = sizeof(testval)/sizeof(unsigned long);
+	unsigned long i;
+	unsigned long limit = SCA_MEM_SIZE/sizeof(unsigned long);
+	unsigned long * addr = (unsigned long *)info->memory_base;
+
+	/* Test data lines with test pattern at one location. */
+
+	for ( i = 0 ; i < count ; i++ ) {
+		*addr = testval[i];
+		if ( *addr != testval[i] )
+			return FALSE;
+	}
+
+	/* Test address lines with incrementing pattern over */
+	/* entire address range. */
+
+	for ( i = 0 ; i < limit ; i++ ) {
+		*addr = i * 4;
+		addr++;
+	}
+
+	addr = (unsigned long *)info->memory_base;
+
+	for ( i = 0 ; i < limit ; i++ ) {
+		if ( *addr != i * 4 )
+			return FALSE;
+		addr++;
+	}
+
+	memset( info->memory_base, 0, SCA_MEM_SIZE );
+	return TRUE;
+}
+
+/* Load data into PCI adapter shared memory.
+ *
+ * The PCI9050 releases control of the local bus
+ * after completing the current read or write operation.
+ *
+ * While the PCI9050 write FIFO not empty, the
+ * PCI9050 treats all of the writes as a single transaction
+ * and does not release the bus. This causes DMA latency problems
+ * at high speeds when copying large data blocks to the shared memory.
+ *
+ * This function breaks a write into multiple transations by
+ * interleaving a read which flushes the write FIFO and 'completes'
+ * the write transation. This allows any pending DMA request to gain control
+ * of the local bus in a timely fasion.
+ */
+void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count)
+{
+	/* A load interval of 16 allows for 4 32-bit writes at */
+	/* 136ns each for a maximum latency of 542ns on the local bus.*/
+
+	unsigned short interval = count / sca_pci_load_interval;
+	unsigned short i;
+
+	for ( i = 0 ; i < interval ; i++ )
+	{
+		memcpy(dest, src, sca_pci_load_interval);
+		read_status_reg(info);
+		dest += sca_pci_load_interval;
+		src += sca_pci_load_interval;
+	}
+
+	memcpy(dest, src, count % sca_pci_load_interval);
+}
+
+void trace_block(SLMP_INFO *info,const char* data, int count, int xmit)
+{
+	int i;
+	int linecount;
+	if (xmit)
+		printk("%s tx data:\n",info->device_name);
+	else
+		printk("%s rx data:\n",info->device_name);
+
+	while(count) {
+		if (count > 16)
+			linecount = 16;
+		else
+			linecount = count;
+
+		for(i=0;i<linecount;i++)
+			printk("%02X ",(unsigned char)data[i]);
+		for(;i<17;i++)
+			printk("   ");
+		for(i=0;i<linecount;i++) {
+			if (data[i]>=040 && data[i]<=0176)
+				printk("%c",data[i]);
+			else
+				printk(".");
+		}
+		printk("\n");
+
+		data  += linecount;
+		count -= linecount;
+	}
+}	/* end of trace_block() */
+
+/* called when HDLC frame times out
+ * update stats and do tx completion processing
+ */
+void tx_timeout(unsigned long context)
+{
+	SLMP_INFO *info = (SLMP_INFO*)context;
+	unsigned long flags;
+
+	if ( debug_level >= DEBUG_LEVEL_INFO )
+		printk( "%s(%d):%s tx_timeout()\n",
+			__FILE__,__LINE__,info->device_name);
+	if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) {
+		info->icount.txtimeout++;
+	}
+	spin_lock_irqsave(&info->lock,flags);
+	info->tx_active = 0;
+	info->tx_count = info->tx_put = info->tx_get = 0;
+
+	spin_unlock_irqrestore(&info->lock,flags);
+
+#ifdef CONFIG_HDLC
+	if (info->netcount)
+		hdlcdev_tx_done(info);
+	else
+#endif
+		bh_transmit(info);
+}
+
+/* called to periodically check the DSR/RI modem signal input status
+ */
+void status_timeout(unsigned long context)
+{
+	u16 status = 0;
+	SLMP_INFO *info = (SLMP_INFO*)context;
+	unsigned long flags;
+	unsigned char delta;
+
+
+	spin_lock_irqsave(&info->lock,flags);
+	get_signals(info);
+	spin_unlock_irqrestore(&info->lock,flags);
+
+	/* check for DSR/RI state change */
+
+	delta = info->old_signals ^ info->serial_signals;
+	info->old_signals = info->serial_signals;
+
+	if (delta & SerialSignal_DSR)
+		status |= MISCSTATUS_DSR_LATCHED|(info->serial_signals&SerialSignal_DSR);
+
+	if (delta & SerialSignal_RI)
+		status |= MISCSTATUS_RI_LATCHED|(info->serial_signals&SerialSignal_RI);
+
+	if (delta & SerialSignal_DCD)
+		status |= MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD);
+
+	if (delta & SerialSignal_CTS)
+		status |= MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS);
+
+	if (status)
+		isr_io_pin(info,status);
+
+	info->status_timer.data = (unsigned long)info;
+	info->status_timer.function = status_timeout;
+	info->status_timer.expires = jiffies + msecs_to_jiffies(10);
+	add_timer(&info->status_timer);
+}
+
+
+/* Register Access Routines -
+ * All registers are memory mapped
+ */
+#define CALC_REGADDR() \
+	unsigned char * RegAddr = (unsigned char*)(info->sca_base + Addr); \
+	if (info->port_num > 1) \
+		RegAddr += 256;	    		/* port 0-1 SCA0, 2-3 SCA1 */ \
+	if ( info->port_num & 1) { \
+		if (Addr > 0x7f) \
+			RegAddr += 0x40;	/* DMA access */ \
+		else if (Addr > 0x1f && Addr < 0x60) \
+			RegAddr += 0x20;	/* MSCI access */ \
+	}
+
+
+unsigned char read_reg(SLMP_INFO * info, unsigned char Addr)
+{
+	CALC_REGADDR();
+	return *RegAddr;
+}
+void write_reg(SLMP_INFO * info, unsigned char Addr, unsigned char Value)
+{
+	CALC_REGADDR();
+	*RegAddr = Value;
+}
+
+u16 read_reg16(SLMP_INFO * info, unsigned char Addr)
+{
+	CALC_REGADDR();
+	return *((u16 *)RegAddr);
+}
+
+void write_reg16(SLMP_INFO * info, unsigned char Addr, u16 Value)
+{
+	CALC_REGADDR();
+	*((u16 *)RegAddr) = Value;
+}
+
+unsigned char read_status_reg(SLMP_INFO * info)
+{
+	unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
+	return *RegAddr;
+}
+
+void write_control_reg(SLMP_INFO * info)
+{
+	unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
+	*RegAddr = info->port_array[0]->ctrlreg_value;
+}
+
+
+static int __devinit synclinkmp_init_one (struct pci_dev *dev,
+					  const struct pci_device_id *ent)
+{
+	if (pci_enable_device(dev)) {
+		printk("error enabling pci device %p\n", dev);
+		return -EIO;
+	}
+	device_init( ++synclinkmp_adapter_count, dev );
+	return 0;
+}
+
+static void __devexit synclinkmp_remove_one (struct pci_dev *dev)
+{
+}