summaryrefslogtreecommitdiffstats
path: root/drivers/clocksource
diff options
context:
space:
mode:
authorChristian Daudt <csd@broadcom.com>2013-03-13 14:27:27 -0700
committerJohn Stultz <john.stultz@linaro.org>2013-03-28 10:58:55 -0700
commit8011657b9e63cb2e914b9a0f75233b910c1854cb (patch)
tree7eb4b207529dc5feaebf95e4335602cf64a4d887 /drivers/clocksource
parentdd5d70e869f960bde6376f4447fff59f16186cf5 (diff)
downloadlinux-8011657b9e63cb2e914b9a0f75233b910c1854cb.tar.gz
linux-8011657b9e63cb2e914b9a0f75233b910c1854cb.tar.bz2
linux-8011657b9e63cb2e914b9a0f75233b910c1854cb.zip
ARM: bcm281xx: Add timer driver (driver portion)
This adds support for the Broadcom timer, used in the following SoCs: BCM11130, BCM11140, BCM11351, BCM28145, BCM28155 Updates from V6: - Split DT portion into a separate patch Updates from V5: - Rebase to latest arm-soc/for-next Updates from V4: - Switch code to use CLOCKSOURCE_OF_DECLARE Updates from V3: - Migrate to 3.9 timer framework updates Updates from V2: - prepend static fns + fields with kona_ Updates from V1: - Rename bcm_timer.c to bcm_kona_timer.c - Pull .h into bcm_kona_timer.c - Make timers static - Clean up comment block - Switched to using clockevents_config_and_register - Added an error to the get_timer loop if it repeats too much - Added to Documentation/devicetree/bindings/arm/bcm/bcm,kona-timer.txt - Added missing readl to timer_disable_and_clear Note: bcm,kona-timer was kept as the 'compatible' field to make it specific enough for when there are multiple bcm timers (bcm,timer is too generic). Signed-off-by: Christian Daudt <csd@broadcom.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
Diffstat (limited to 'drivers/clocksource')
-rw-r--r--drivers/clocksource/Makefile1
-rw-r--r--drivers/clocksource/bcm_kona_timer.c211
2 files changed, 212 insertions, 0 deletions
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 4d8283aec5b5..96e25319659b 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o
obj-$(CONFIG_SUNXI_TIMER) += sunxi_timer.o
obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o
obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o
+obj-$(CONFIG_ARCH_BCM) += bcm_kona_timer.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o
diff --git a/drivers/clocksource/bcm_kona_timer.c b/drivers/clocksource/bcm_kona_timer.c
new file mode 100644
index 000000000000..350f49356458
--- /dev/null
+++ b/drivers/clocksource/bcm_kona_timer.c
@@ -0,0 +1,211 @@
+/*
+ * Copyright (C) 2012 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/clockchips.h>
+#include <linux/types.h>
+
+#include <linux/io.h>
+#include <asm/mach/time.h>
+
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+
+#define KONA_GPTIMER_STCS_OFFSET 0x00000000
+#define KONA_GPTIMER_STCLO_OFFSET 0x00000004
+#define KONA_GPTIMER_STCHI_OFFSET 0x00000008
+#define KONA_GPTIMER_STCM0_OFFSET 0x0000000C
+
+#define KONA_GPTIMER_STCS_TIMER_MATCH_SHIFT 0
+#define KONA_GPTIMER_STCS_COMPARE_ENABLE_SHIFT 4
+
+struct kona_bcm_timers {
+ int tmr_irq;
+ void __iomem *tmr_regs;
+};
+
+static struct kona_bcm_timers timers;
+
+static u32 arch_timer_rate;
+
+/*
+ * We use the peripheral timers for system tick, the cpu global timer for
+ * profile tick
+ */
+static void kona_timer_disable_and_clear(void __iomem *base)
+{
+ uint32_t reg;
+
+ /*
+ * clear and disable interrupts
+ * We are using compare/match register 0 for our system interrupts
+ */
+ reg = readl(base + KONA_GPTIMER_STCS_OFFSET);
+
+ /* Clear compare (0) interrupt */
+ reg |= 1 << KONA_GPTIMER_STCS_TIMER_MATCH_SHIFT;
+ /* disable compare */
+ reg &= ~(1 << KONA_GPTIMER_STCS_COMPARE_ENABLE_SHIFT);
+
+ writel(reg, base + KONA_GPTIMER_STCS_OFFSET);
+
+}
+
+static void
+kona_timer_get_counter(void *timer_base, uint32_t *msw, uint32_t *lsw)
+{
+ void __iomem *base = IOMEM(timer_base);
+ int loop_limit = 4;
+
+ /*
+ * Read 64-bit free running counter
+ * 1. Read hi-word
+ * 2. Read low-word
+ * 3. Read hi-word again
+ * 4.1
+ * if new hi-word is not equal to previously read hi-word, then
+ * start from #1
+ * 4.2
+ * if new hi-word is equal to previously read hi-word then stop.
+ */
+
+ while (--loop_limit) {
+ *msw = readl(base + KONA_GPTIMER_STCHI_OFFSET);
+ *lsw = readl(base + KONA_GPTIMER_STCLO_OFFSET);
+ if (*msw == readl(base + KONA_GPTIMER_STCHI_OFFSET))
+ break;
+ }
+ if (!loop_limit) {
+ pr_err("bcm_kona_timer: getting counter failed.\n");
+ pr_err(" Timer will be impacted\n");
+ }
+
+ return;
+}
+
+static const struct of_device_id bcm_timer_ids[] __initconst = {
+ {.compatible = "bcm,kona-timer"},
+ {},
+};
+
+static void __init kona_timers_init(void)
+{
+ struct device_node *node;
+ u32 freq;
+
+ node = of_find_matching_node(NULL, bcm_timer_ids);
+
+ if (!node)
+ panic("No timer");
+
+ if (!of_property_read_u32(node, "clock-frequency", &freq))
+ arch_timer_rate = freq;
+ else
+ panic("clock-frequency not set in the .dts file");
+
+ /* Setup IRQ numbers */
+ timers.tmr_irq = irq_of_parse_and_map(node, 0);
+
+ /* Setup IO addresses */
+ timers.tmr_regs = of_iomap(node, 0);
+
+ kona_timer_disable_and_clear(timers.tmr_regs);
+}
+
+static int kona_timer_set_next_event(unsigned long clc,
+ struct clock_event_device *unused)
+{
+ /*
+ * timer (0) is disabled by the timer interrupt already
+ * so, here we reload the next event value and re-enable
+ * the timer.
+ *
+ * This way, we are potentially losing the time between
+ * timer-interrupt->set_next_event. CPU local timers, when
+ * they come in should get rid of skew.
+ */
+
+ uint32_t lsw, msw;
+ uint32_t reg;
+
+ kona_timer_get_counter(timers.tmr_regs, &msw, &lsw);
+
+ /* Load the "next" event tick value */
+ writel(lsw + clc, timers.tmr_regs + KONA_GPTIMER_STCM0_OFFSET);
+
+ /* Enable compare */
+ reg = readl(timers.tmr_regs + KONA_GPTIMER_STCS_OFFSET);
+ reg |= (1 << KONA_GPTIMER_STCS_COMPARE_ENABLE_SHIFT);
+ writel(reg, timers.tmr_regs + KONA_GPTIMER_STCS_OFFSET);
+
+ return 0;
+}
+
+static void kona_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *unused)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_ONESHOT:
+ /* by default mode is one shot don't do any thing */
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ default:
+ kona_timer_disable_and_clear(timers.tmr_regs);
+ }
+}
+
+static struct clock_event_device kona_clockevent_timer = {
+ .name = "timer 1",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .set_next_event = kona_timer_set_next_event,
+ .set_mode = kona_timer_set_mode
+};
+
+static void __init kona_timer_clockevents_init(void)
+{
+ kona_clockevent_timer.cpumask = cpumask_of(0);
+ clockevents_config_and_register(&kona_clockevent_timer,
+ arch_timer_rate, 6, 0xffffffff);
+}
+
+static irqreturn_t kona_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = &kona_clockevent_timer;
+
+ kona_timer_disable_and_clear(timers.tmr_regs);
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+}
+
+static struct irqaction kona_timer_irq = {
+ .name = "Kona Timer Tick",
+ .flags = IRQF_TIMER,
+ .handler = kona_timer_interrupt,
+};
+
+static void __init kona_timer_init(void)
+{
+ kona_timers_init();
+ kona_timer_clockevents_init();
+ setup_irq(timers.tmr_irq, &kona_timer_irq);
+ kona_timer_set_next_event((arch_timer_rate / HZ), NULL);
+}
+
+CLOCKSOURCE_OF_DECLARE(bcm_kona, "bcm,kona-timer",
+ kona_timer_init);