crypto: atmel-sha - add support for Device Tree

Add support for Device Tree and use of the DMA DT API to
get the channels if needed.
Documentation is added for these DT nodes.

Initial code by: Nicolas Royer and Eukrea.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>

1 files changed, 75 insertions, 24 deletions

diff --git a/drivers/crypto/atmel-sha.c b/drivers/crypto/atmel-sha.c
index eaed8bf183bc..ecfdf727cc36 100644
--- a/drivers/crypto/atmel-sha.c
+++ b/drivers/crypto/atmel-sha.c
@@ -30,6 +30,7 @@
 #include <linux/irq.h>
 #include <linux/scatterlist.h>
 #include <linux/dma-mapping.h>
+#include <linux/of_device.h>
 #include <linux/delay.h>
 #include <linux/crypto.h>
 #include <linux/cryptohash.h>
@@ -1263,32 +1264,29 @@ static int atmel_sha_dma_init(struct atmel_sha_dev *dd,
 	int err = -ENOMEM;
 	dma_cap_mask_t mask_in;
 
-	if (pdata && pdata->dma_slave->rxdata.dma_dev) {
-		/* Try to grab DMA channel */
-		dma_cap_zero(mask_in);
-		dma_cap_set(DMA_SLAVE, mask_in);
+	/* Try to grab DMA channel */
+	dma_cap_zero(mask_in);
+	dma_cap_set(DMA_SLAVE, mask_in);
 
-		dd->dma_lch_in.chan = dma_request_channel(mask_in,
-				atmel_sha_filter, &pdata->dma_slave->rxdata);
-
-		if (!dd->dma_lch_in.chan)
-			return err;
-
-		dd->dma_lch_in.dma_conf.direction = DMA_MEM_TO_DEV;
-		dd->dma_lch_in.dma_conf.dst_addr = dd->phys_base +
-			SHA_REG_DIN(0);
-		dd->dma_lch_in.dma_conf.src_maxburst = 1;
-		dd->dma_lch_in.dma_conf.src_addr_width =
-			DMA_SLAVE_BUSWIDTH_4_BYTES;
-		dd->dma_lch_in.dma_conf.dst_maxburst = 1;
-		dd->dma_lch_in.dma_conf.dst_addr_width =
-			DMA_SLAVE_BUSWIDTH_4_BYTES;
-		dd->dma_lch_in.dma_conf.device_fc = false;
-
-		return 0;
+	dd->dma_lch_in.chan = dma_request_slave_channel_compat(mask_in,
+			atmel_sha_filter, &pdata->dma_slave->rxdata, dd->dev, "tx");
+	if (!dd->dma_lch_in.chan) {
+		dev_warn(dd->dev, "no DMA channel available\n");
+		return err;
 	}
 
-	return -ENODEV;
+	dd->dma_lch_in.dma_conf.direction = DMA_MEM_TO_DEV;
+	dd->dma_lch_in.dma_conf.dst_addr = dd->phys_base +
+		SHA_REG_DIN(0);
+	dd->dma_lch_in.dma_conf.src_maxburst = 1;
+	dd->dma_lch_in.dma_conf.src_addr_width =
+		DMA_SLAVE_BUSWIDTH_4_BYTES;
+	dd->dma_lch_in.dma_conf.dst_maxburst = 1;
+	dd->dma_lch_in.dma_conf.dst_addr_width =
+		DMA_SLAVE_BUSWIDTH_4_BYTES;
+	dd->dma_lch_in.dma_conf.device_fc = false;
+
+	return 0;
 }
 
 static void atmel_sha_dma_cleanup(struct atmel_sha_dev *dd)
@@ -1326,6 +1324,48 @@ static void atmel_sha_get_cap(struct atmel_sha_dev *dd)
 	}
 }
 
+#if defined(CONFIG_OF)
+static const struct of_device_id atmel_sha_dt_ids[] = {
+	{ .compatible = "atmel,at91sam9g46-sha" },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, atmel_sha_dt_ids);
+
+static struct crypto_platform_data *atmel_sha_of_init(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct crypto_platform_data *pdata;
+
+	if (!np) {
+		dev_err(&pdev->dev, "device node not found\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		dev_err(&pdev->dev, "could not allocate memory for pdata\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	pdata->dma_slave = devm_kzalloc(&pdev->dev,
+					sizeof(*(pdata->dma_slave)),
+					GFP_KERNEL);
+	if (!pdata->dma_slave) {
+		dev_err(&pdev->dev, "could not allocate memory for dma_slave\n");
+		devm_kfree(&pdev->dev, pdata);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	return pdata;
+}
+#else /* CONFIG_OF */
+static inline struct crypto_platform_data *atmel_sha_of_init(struct platform_device *dev)
+{
+	return ERR_PTR(-EINVAL);
+}
+#endif
+
 static int atmel_sha_probe(struct platform_device *pdev)
 {
 	struct atmel_sha_dev *sha_dd;
@@ -1402,13 +1442,23 @@ static int atmel_sha_probe(struct platform_device *pdev)
 	if (sha_dd->caps.has_dma) {
 		pdata = pdev->dev.platform_data;
 		if (!pdata) {
-			dev_err(&pdev->dev, "platform data not available\n");
+			pdata = atmel_sha_of_init(pdev);
+			if (IS_ERR(pdata)) {
+				dev_err(&pdev->dev, "platform data not available\n");
+				err = PTR_ERR(pdata);
+				goto err_pdata;
+			}
+		}
+		if (!pdata->dma_slave) {
 			err = -ENXIO;
 			goto err_pdata;
 		}
 		err = atmel_sha_dma_init(sha_dd, pdata);
 		if (err)
 			goto err_sha_dma;
+
+		dev_info(dev, "using %s for DMA transfers\n",
+				dma_chan_name(sha_dd->dma_lch_in.chan));
 	}
 
 	spin_lock(&atmel_sha.lock);
@@ -1483,6 +1533,7 @@ static struct platform_driver atmel_sha_driver = {
 	.driver		= {
 		.name	= "atmel_sha",
 		.owner	= THIS_MODULE,
+		.of_match_table	= of_match_ptr(atmel_sha_dt_ids),
 	},
 };